DL Brochure - Wera - Cabac · 1212 1313 Kraftform Plus - Series 100 vde the Safety Screwdriver when...

ToolsScrewdriving

for electricianS

for work on live wiring

2 32 3For more information contact your

CABAC sales representativeFor more information contact your

CABAC sales representative

Kraftform Stainless VDE ..........................................................................3

Kraftform Plus - Series 100 VDE ............................................................. 6

Kraftform Kompakt VDE .......................................................................18

Kraftform Kompakt VDE Torque ...........................................................22

Kraftform Comfort VDE ........................................................................29

Accessories ........................................................................................... 32

Kraftform Kompakt 20 Series ...............................................................33

Kraftform Plus Series 900.... ...................................................... ...........34

contents

Unfortunately, stainless steel does get damaged by rust – just not in the way you imagine!Stainless steel looks good, and its natural properties do keep rust at bay.

However, if screwdriving jobs on stainless steel fixings or fasteners are carried out with conventional carbon steel tools, steel particles from these tools remain as residue in the screw head and rust when exposed to oxygen.

This is known as extraneous rust.

This ruins the stunning aesthetic properties of stainless steel.

Solution to the rust problem: screw stainless steel fixings with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided.

Kraftform Stainless vdeStainless Steel tools

3160 i/7 Screwdriver Set PlUS rack

DESCRIPTION: The safety screwdriver for stainless steel screws, Lasertip blade, Voltage Tester PLUS Rack

APPLICATION: Slotted and Phillips screwsCONTENTS: Stainless steel, 7-piece set and rack in display carton

Part No. Product / contents Pu

WERA022728 3160 i Vde 1x0, 5x3, 0x80†; 1x0, 6x3, 5x100; 1x0, 8x4, 0x100; 1x1, 0x5, 5x125 1

3162 i Vde 1xPH 1x80; 1xPH 2x100 3247 1x0, 5x3, 0x70

†Without Lasertip





3162 i vde PH insulated Screwdriver for Phillips screws

APPLICATION: Phillips screws BLADE: Insulated, individually tested as per IEC 60900DESIGN: Lasertip, stainless steel for minimising rustHANDLE: Kraftform with non-roll feature, multi-component

Part no. MM MM Pu

WERA022733 PH1PH 1 80 98 3 1/8” 5

WERA022734 PH1PH 2 100 105 4“4” 5


3160i vde insulated Screwdriver for Slotted Screws

APPLICATION: Slotted screws BLADE: Insulated, individually tested as per IEC 60900DESIGN: Conical edge, Lasertip, stainless steel for minimising rustHANDLE: Kraftform with non-roll feature, multi-component

Part no. MM MM MM MM Pu

WERA022729† 0,5 3,0 80 81 1/8” 3 1/8” 10

WERA022730 0,6 3,5 100 81 9/64" 4" 10

WERA022731 0,8 4,0 100 98 5/32" 4" 10

WERA022732 0,8 5,5 125 98 7/32" 5" 10

†without Lasertip

How to prevent the screwdriver from slipping out of the screw headIt happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury.

The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser.

This rough surface literally “bites” itself firmly into the screw head. Slipping out becomes a thing of the past.




APPLICATION: Slotted screwsBLADE: Insulated, individually tested as per IEC 60900DESIGN: Conical tip, LasertipHANDLE: Kraftform with non-roll feature, multi-component

Part no. mm mm mm mm

WERA006100 † 0,4 2,5 80 81 3/32" 3 1/8" 10WERA006105 † 0,5 3,0 100 81 1/8" 4" 10WERA006110 0,6 3,5 100 81 9/64" 4" 10WERA006115 0,8 4,0 100 98 5/32" 4" 10WERA006116 0,8 4,0 150 98 5/32" 6" 5WERA006120 1,0 5,5 125 98 7/32" 5" 10WERA006121 1,0 5,5 200 98 7/32" 8" 5WERA006125 1,2 6,5 150 105 1/4" 6" 10WERA006126 1,2 6,5 200 105 1/4" 8" 5WERA006130 1,2 8,0 175 112 5/16" 7" 5WERA006135 1,6 8,0 200 112 5/16" 8" 5WERA006140 1,6 10,0 200 112 3/8" 8" 5

† without Lasertip

Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring

160 i vde insulated Screwdriver for Slotted Screws


160 iS/5 rack Screwdriver Set


WERA006440 0,6 3,5 100 81 9/64" 4" 10

WERA006441 0,8 4,0 100 98 5/32" 4" 10

WERA006442 1,0 5,5 125 98 7/32" 5" 10

APPLICATION: Slotted screws and actuating tool for spring terminals

BLADE:Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900

DESIGN: Conical blade, zinc-phosphatedHANDLE: Kraftform with non-roll feature, multi-component

DESCRIPTION: The safety screwdriver with reduced blade diameter and rack

APPLICATION: Slotted and Phillips screwsAPPLICATION CONTENT: 5-piece set and rack in display carton


160 iS vde insulated Screwdriver with reduced blade diameter for slotted screws

extra slim

Part no.WERA321000 1160 i Vde 1 x 0,6x3,5x100;

1 x 0,8x4,0x100; 1 x 1,0x5,5x125162 i PH Vde 1 x PH 1x80; 1 x PH 2x100

extra slim




Application: Phillips screwsBlade: Insulated, individually tested as per IEC 60900Design: LasertipHandle: Kraftform with non-roll feature, multi-component


162 i PH vde insulated screwdriver for Phillips screws

Application: Phillips screwsBlade: Reduced blade diameter with integrated protective insula-

tion, allows sunken PH screws to be accessed and actuated, individually tested as per IEC 60900

Design: Blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006450 PH 1 80 98 3 1/8" 5

WERA006451 PH 2 100 105 4" 5


162 iS PH vde insulated screwdriver with reduced blade diameter for Phillips screws

Part no. mm mm

WERA006150 † PH 0 80 81 3 1/8" 5

WERA006152 PH 1 80 98 3 1/8" 5

WERA006153 PH 1 150 98 6" 5

WERA006154 PH 2 100 105 4" 5

WERA006159 PH 2 200 105 8" 5

WERA006156 PH 3 150 112 6" 5

WERA006158 † PH 4 200 112 8" 2

† without Lasertip

why is a vde screwdriver safe? A dielectric strength test under a 10,000 volt load in a water bath is the only way of reassuring users that their screwdrivers have been exhaustively tested for their most important feature: their insulation. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts as per IEC 60900.

the Kraftform Handle The outstanding design of the Kraftform handle ensures that it fits perfectly into the hand, preventing hand injuries such as blisters and calluses.

The hard materials used for the handle ensure rapid hand repositioning, without any danger of the skin “sticking” to the handle. The softer “anti-slip” zones enable the low-loss transfer of high forces – resulting in less screwdriving effort being required.

extra slim




165 iS PZ vde insulated screwdriver with reduced blade diameter for Pozidriv screws

Application: Suitable for Pozidriv*) screwsBlade: Insulated, individually tested as per IEC 60900Design: LasertipHandle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006160 † PZ 0 80 81 3 1/8" 5

WERA006162 PZ 1 80 98 3 1/8" 5

WERA006163 PZ 1 150 98 6" 5

WERA006164 PZ 2 100 105 4" 5

WERA006165 PZ 2 200 105 8" 5

WERA006166 PZ 3 150 112 6" 5

WERA006168 † PZ 4 200 112 8" 2

† without Lasertip*) Pozidriv = reg. trademark of European Industrial Service Ltd.

Application: Suitable for Pozidriv*) screwsBlade: Reduced blade diameter with integrated protective insula-

tion, allows sunken PZ screws to be accessed and actuated, individually tested as per IEC 60900

Design: Blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006460 PZ 1 80 98 3 1/8" 5

WERA006461 PZ 2 100 105 4" 5

*) Pozidriv = reg. trademark of European Industrial Service Ltd.


165 i PZ vde insulated screwdriver for Pozidriv screws

Part no. mm mm

WERA006182 TX 6 80 81 3 1/8" 5

WERA006184 TX 8 80 81 3 1/8" 5

WERA006170 TX 10 80 81 3 1/8" 5

WERA006172 TX 15 80 98 3 1/8" 5

WERA006174 TX 20 80 98 3 1/8" 5

WERA006176 TX 25 100 105 4" 5

WERA006178 TX 30 100 105 4" 5

WERA006179 TX 40 150 112 6" 5

Application: TORX® socket screwsBlade: Insulated, individually tested as per IEC 60900Design: Zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component


167 i vde insulated screwdriver for torX® screws

extra slim

extra slim





168 i vde insulated screwdriver for square socket head screws

Part no. mm mm

WERA004780 # 1 80 98 3 1/8" 5

WERA004783 # 1 150 98 6" 5

WERA004781 # 2 100 105 4" 5

WERA004784 # 2 200 105 8" 5

Application: Square socket head screwsBlade: Insulated, individually tested as per IEC 60900Design: Zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component


190 i vde insulated nutdriver


WERA005300 5,5 125 98 11,0 5" 5

WERA005305 6,0 125 98 12,0 5" 5

WERA005310 7,0 125 105 14,0 5" 5

WERA005315 8,0 125 105 15,0 5" 5

WERA005320 9,0 125 105 16,0 5" 5

WERA005325 10,0 125 112 17,0 5" 5

WERA005330 11,0 125 112 19,0 5" 5

WERA005335 12,0 125 112 20,0 5" 5

WERA005340 13,0 125 112 21,0 5" 5

Application: Hexagon headed bolts, screws and nutsBlade: Insulated, individually inspected as per IEC 60900Design: Zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component

Screwdriver for square socket head screws The various dimensions of the screwdrivers for square socket head screws (also known as Robertson screws) can be seen from the colour of the screwdriver handles:

# 1 = Green

# 2 = Red




Kraftform Plus - Series 100 vdePlusMinus for work on terminal screws

165 i PZ/S # 1+2 Screwdriver set

Part no.WERA073600 1162 i PH/S VDE 1 x # 1x80; 1 x # 2x100

Application: PlusMinus screws (Phillips/slotted)Content: 2-piece set in display pack

Application: PlusMinus screws (Pozidriv*)/slotted)Content: 2-piece set in display pack

Part no.WERA073601 1165 i PZ/S VDE 1 x # 1x80; 1 x # 2x100



162 i PH/S # 1+2 Screwdriver set

PlusMinus / McB screwdriversFor the use in terminal blocks, control cabinets, switches, relays, sockets etc. Combination of slotted and Pozidriv or slotted and Phillips.




162 iS PH/S vde insulated screwdriver with reduced blade diameter for PlusMinus screws (Phillips/slotted)

Application: PlusMinus screws (Phillips/slotted)Blade: Reduced blade diameter with integrated protective insula-

tion, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900

Design: Combination profile Phillips/slotted, blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006455 # 1 80 98 3 1/8" 5

WERA006456 # 2 100 105 4" 5

165 iS PZ/S vde insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted)

Application: For PlusMinus screws (Pozidriv*)/slotted)Blade: Reduced blade diameter with integrated protective insula-

tion, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900

Design: PlusMinus (Pozidriv*)/slotted), blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006465 # 1 80 98 3 1/8" 5

WERA006466 # 2 100 105 4" 5


Application: PlusMinus screws (Phillips/slotted)Blade: Insulated, individually tested as per IEC 60900Design: PlusMinus (Phillips/slotted)Handle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006380 # 1 80 98 3 1/8" 5

WERA006381 # 2 100 105 4" 5


162 i PH/S vde insulated screwdriver for PlusMinus screws (Phillips/slotted)

Application: For PlusMinus screws (Pozidriv*)/slotted)Blade: Insulated, individually tested as per IEC 60900Design: PlusMinus (Pozidriv*)/slotted)Handle: Kraftform with non-roll feature, multi-component

Part no. mm mm

WERA006190 # 1 80 98 3 1/8" 5

WERA006191 # 2 100 105 4" 5



165 i PZ/S vde insulated screwdriver for PlusMinus screws (Pozidriv/slotted)

extra slim

extra slim




Kraftform Kompaktversatile tools for work on live wiring

Kraftform Kompakt vde 60 i/68 i/7

Part no.WERA003472 1817 Vde 1 x 9x102

KK 60 i 1 x 0,4x2,5x154; 1 x 0,6x3,5x154; 1 x 0,8x4,0x154; 1 x 1,0x5,5x154

KK 65 i PZ 1 x PZ 1x154; 1 x PZ 2x154

Kraftform Kompakt vde 60 i/65 i/7

1 Kraftform hand-held bit holder 817 VDE for Wera interchangeable blades onlyVDE interchangeable blades (each 154 mm long)7-piece set

The tools can be stored and carried in the rugged belt pouch, keeping them close to hand.


KK 60 i 1 x 0,4x2,5x154; 1 x 0,6x3,5x154; 1 x 0,8x4,0x154; 1 x 1,0x5,5x154

KK 62 i 1 x PH 1x154; 1 x PH 2x154

1 Kraftform hand-held bit holder 817 VDE for Wera interchangeable blades onlyVDE interchangeable blades (each 154 mm long)7-piece set


KK 60 i 1 x 0,6x3,5x154; 1 x 1,0x5,5x154KK 62 i 1 x PH 1x154; 1 x PH 2x154KK 68 i 1 x # 1x154; 1 x # 2x154

1 Kraftform hand-held bit holder 817 VDE for Wera VDE interchangeable blades onlyVDE interchangeable blades (each 154 mm long)7-piece set


Kraftform Kompakt vde 60 i/7




Part no. Art.no. nm nm mm

WERA074750 † 7441 VDE 9 1,2-3,0 0,10 192 7 9/16" 1

Application: For Wera interchangeable Kraftform Kompakt VDE blades only

Accuracy: ±6 % (EN ISO 6789). Numerical torque value scale, audible excess-load signal

Handle: Kraftform with non-roll feature, multi-component

† available from July 2013

817 vde Kraftform blade-holding handle

Part no. mm mm

WERA003990 9 102 1

Application: For Wera interchangeable VDE blades onlyHandle: Kraftform with non-roll feature, multi-component


Series 7400 vde Kraftform adjustable torque handle

Kraftform Kompaktversatile tools for work on live wiring.




Kraftform Kompakt vde torqueversatile tools for work on live wiring

Kraftform Kompakt vde torQUe 1.2 - 3.0 nm

14

Code

05059291001 17400 VDE 1 x 7441 VDE 1)

KK 60 i 1 x 0,4x2,5x154

KK 60 iS 1 x 0,6x3,5x154; 1 x 0,8x4,0x154; 1 x 1,0x5,5x154

KK 62 iS 1 x PH 1x154; 1 x PH 2x154

KK 65 iS PZ 1 x PZ 1x154; 1 x PZ 2x154

KK 65 iS PZ/S 1 x # 1x154; 1 x # 2x154

KK 67 i TORX® 1 x TX 10x154

KK 67 iS TORX® 1 x TX 15x154; 1 x TX 20x154; 1 x TX 25x154

!

Kraftform Kompakt VDEVersatile tools for work on live wiring

Kraftform Kompakt VDE Torque 1.2 - 3.0 Nm

1 Series 7400 VDE Kraftform adjustable torque handle (1.2 - 3.0 Nm) for Wera VDE interchangeable blades only

VDE interchangeable blades (each 154 mm long) with reduced blade diameter (articles KK 60 i 0,4x2,5 and KK 67 i TX 10 conventional diameter) with inte-grated protective insulation, allows sunken screws and spring elements to be accessed and actuated

15-piece set

1) available from July 2013

This tool is ideal for electrical applications and ensures safe work on components with loads up to 1,000 volts. It is perfect for the torque-controlled tightening of screws so as to avoid any damage to the screw or tool and to ensure a secure screw connection.

• Hand holder with adjustable torque from 1.2 – 3.0 Nm.• Accuracy ± 6% as per EN ISO 6789, BS EN 26789.• Suitable for the attachment of Wera VDE interchangeable

blades.• Simple to set the torque value using the integrated scale. • Distinctly audible and noticeable excess load signal when the

pre-set value is exceeded. • Unlimited torque for manual loosening jobs. • Handle/Interchangeable blade system for rapid blade exch-

ange.• Insulated interchangeable blades in accordance with IEC

60900 / DIN EN 60900. • Blades individually tested at 10,000 volts.• Including 14 blades with reduced blade diameter and inte-

grated protective insulation to allow easy access to sunken screws and actuation of spring terminals.

Multi-component, ergonomic Kraftform handle: Soft gripping zones with large contact surfaces provide particularly high friction and thereby enable outstanding torque transfer. Hard gripping zones ensure almost frictionless contact and consequently a more rapid repositioning of the hand. The result: more power and faster speeds when screwdriving.

Rapid attachment of the interchangeable blades: Simply insert the blade in the chuck and the automatic locking mechanism ensures a secure fit. To change the blade, just push the shift ring down-wards and remove the blade.

Orderly storage and secure transportation in a robust belt pouch.

Adjustable torque handleKraftform Kompakt VDE Torque

1 Series 7400 VDE Kraftform adjustable torque handle (1.2 - 3.0Nm) for Wera VDE interchangeable blades only.VDE interchangeable blades (each 154mm long) with reduced blade diameter (articles KK 60 i 0,4x2,5 and KK 67 i TX 10 conventional diameter) with integrated protective insulation, allows sunken screws and spring elements the be accessed and actuated.15 Piece set.

Part no.

WERA059291 1 x 7441 VDE

1 x 0,4x2,5x1541 x 0,6x3,5x154; 1 x 0, 8x4,0x154;1 x 1,0x5,5x154

1 x PH 1x154; 1 x PH 2x154

7400 VDE

KK 60 i

KK 60 iS

KK 62 iS

KK 65 iS PZ

KK 65 iS PZ/S

KK 67 i TORX®

KK 67 iS TORX®

1 x PZ 1x154; 1 x PZ 2x154

1 x # 1x154; 1 x # 2x154

1 x TX 10x1541 x TX 15x154; 1 x TX 20x154;1 x TX 25x154

Kraftform Kompakt vde torque Kraftform Kompakt VDE Torque do not require complex, time-consum-ing procedures to change the torque setting. No additional tools required. No other VDE torque screwdriver comes close.




Part no. mm

WERA003455 PZ 1 154 6 1/16" 5

WERA003456 PZ 2 154 6 1/16" 5

Application: Pozidriv*) screwsBlade: Reduced blade diameter with integrated protective

insulation, allows sunken PZ screws to be accessed and actuated, individually tested as per IEC 60900

Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point

Application: Slotted screwsBlade: Reduced blade diameter with integrated protective

insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900

Drive: 9 mm hexagonal with entry chamferDesign: Conical blade, zinc-phosphated, Black Point

Part no. mm mm mm

WERA003406 0,6 3,5 154 9/64" 6 1/16" 5

WERA003407 0,8 4,0 154 5/32" 6 1/16" 5

WERA003408 1,0 5,5 154 7/32" 6 1/16" 5

Kraftform Kompakt vdeversatile tools for work on live wiring

Kraftform Kompakt vde 60 iS



Part no. mm

WERA003413 PH 1 154 6 1/16" 5

WERA003414 PH 2 154 6 1/16" 5


Application: Phillips screwsBlade: Reduced blade diameter with integrated protective

insulation, allows sunken PH screws to be accessed and actuated, individually tested as per IEC 60900


Part no. mm

WERA003442 # 1 154 6 1/16" 5

WERA003443 # 2 154 6 1/16" 5

Kraftform Kompakt vde 62 iS PH/S

Application: PlusMinus screws, slotted/PhillipsBlade: Reduced blade diameter with integrated protective

insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900

Drive: 9 mm hexagonal with entry chamferDesign: PlusMinus, slotted/Phillips, zinc-phosphated, Black Point

extra slim

extra slim

extra slim

extra slim




Application: PlusMinus screws, slotted/Pozidriv*)

Blade: Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900

Drive: 9 mm hexagonal with entry chamferDesign: PlusMinus, slotted/Pozidriv, zinc-phosphated, Black Point

Part no. mm

WERA003447 # 1 154 6 1/16" 5

WERA003448 # 2 154 6 1/16" 5


Part no. mm

WERA003437 TX 15 154 6 1/16" 5

WERA003438 TX 20 154 6 1/16" 5

WERA003439 TX 25 154 6 1/16" 5

Kraftform Kompakt vde 67 iS torX®

Application: TORX® socket screwsBlade: Reduced blade diameter with integrated protective

insulation, allows sunken TORX® socket screws to be accessed and actuated, individually tested as per IEC 60900


Application: Hexagon socket screwsBlade: Insulated, individually tested as per IEC 60900Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point

Part no. mm mm

WERA003420 2,5 154 6 1/16" 5

WERA003421 3,0 154 6 1/16" 5

WERA003422 4,0 154 6 1/16" 5

WERA003423 5,0 154 6 1/16" 5

WERA003424 6,0 154 6 1/16" 5


Application: Square socket head screwsBlade: Reduced blade diameter with integrated protective insula-

tion, allows sunken square socket head screws to be accessed and actuated, individually tested as per IEC 60900


Part no. mm

WERA003417 # 1 154 6 1/16" 5

WERA003418 # 2 154 6 1/16" 5


Kraftform Kompakt vde 65 iS PZ/S


Kraftform Kompakt vde 64 iextra slim

extra slim

extra slim




Kraftform comfort vdeconvenient, Safe, good!

1160 i/7 Safety screwdriver set Kraftform comfort vde and voltage tester

Part no.WERA031575 11160 i Vde 1 x 0,4x2,5x80; 1 x 0,6x3,5x100; 1 x

0,8x4,0x100; 1 x 1,0x5,5x1251162 i PH Vde 1 x PH 1x80; 1 x PH 2x1004115 1 x 0,5x3,0x65

Application: Slotted and Phillips screwsContent: 7-piece set in display carton

individually tested at 10000vThe Kraftform Comfort VDE series offers a wide and diverse range of screwdrivers for universal use, with the distinctive Kraftform handle. The individual testing in a water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900), ensures safe working under a load of up to 1,000 volts.


Part no. mm mm

WERA003460 6,3 89 3 9/16" 5

Switch cabinet key, 6.3 mm, glass-fibre reinforced

Kraftform Kompakt 96 vK 6,3

Kraftform Kompakt 97 vK 8,1

Part no. mm mm

WERA003461 8,1 89 3 9/16" 5

Switch cabinet key, 8.1 mm, glass-fibre reinforced

Part no. mm

WERA003462 89 3 9/16" 5

Kraftform Kompakt 98 dK

Switch cabinet key, glass-fibre reinforced

Part no. mm

WERA003463 89 3 9/16" 5

Kraftform Kompakt 99 fl

Switch cabinet key, glass-fibre reinforced





WERA031580 0,4 2,5 80 81 3/32" 3 1/8" 10

WERA031581 0,5 3,0 100 81 1/8" 4" 10

WERA031582 0,6 3,5 100 81 9/64" 4" 10

WERA031583 0,8 4,0 100 98 5/32" 4" 10

WERA031587 1,0 5,5 125 98 7/32" 5" 10

WERA031585 1,0 5,5 200 98 7/32" 8" 5

WERA031588 1,2 6,5 150 105 1/4" 6" 10

WERA031589 1,2 8,0 175 112 5/16" 7" 5

WERA031590 1,6 8,0 200 112 5/16" 8" 5

WERA031591 1,6 10,0 200 112 3/8" 8" 5

Application: Slotted screwsBlade: Insulated, individually tested as per IEC 60900Design: Conical tip, chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component

Screw symbol and tip sizeidentification markings on the handle make it easier to find the right screwdriver in the tool case or at the workplace.

Hexagonal non-roll feature prevents any annoying rolling away.

Part no. mm mm

WERA031600 PH 0 80 81 3 1/8" 5

WERA031601 PH 1 80 98 3 1/8" 5

WERA031603 PH 2 100 105 4" 5

WERA031605 PH 3 150 112 6" 5

WERA031606 PH 4 200 112 8" 2

Application: Phillips screwsBlade: Insulated, individually tested as per IEC 60900Design: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component

1165 i PZ vde insulated screwdriver for Pozidriv screws

Application: Suitable for Pozidriv*) screwsBlade: Insulated, individually tested as per IEC 60900Design: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component

Part no. mm mm

WERA031610 PZ 0 80 81 3 1/8" 5

WERA031611 PZ 1 80 98 3 1/8" 5

WERA031613 PZ 2 100 105 4" 5

WERA031615 PZ 3 150 112 6" 5



1162 i PH vde insulated screwdriver for Phillips screws


1160 i vde insulated screwdriver for slotted screws




Part no.WERA051025 1889/4 r 1 x1/4”x100

800/1 Z 1 x 1,0x5,5x25; 1 x 1,2x6,5x25

851/1 Z PH 1 x PH 1x25; 1 x PH 2x25868/1 Z 1 x # 1x25; 1 x # 2x25

Part no.WERA073680 51440 1 x 4,5 - 6,0x41,0

1442 1 x 6,0 - 8,5x41,0

1440/1442 Screw gripper set

Application: Attachment with holding function for screws, holds all screw profiles and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 4.5 mm to 6.0 mm and 6.0 mm to 8.5 mm

Construction: Elastomer

Application: Suitable for 1/4” DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon socket insert bits and Wera Series 1 and 4

Design: Attachment, bayonet, Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single hand technology

Handle: Kraftform with non-roll feature, multi-component, inte-grated magazine

Application: Suitable for 1/4” DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon socket insert bits and Wera Series 1 and 4

Design: Attachment, bayonet, Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single hand technology

Handle: Kraftform with non-roll feature, multi-component, inte-grated magazine

Kraftform Kompakt 20 SeriesBayonet Blade Models

Kraftform Kompakt 25 with pouch

Kraftform Kompakt 26 with pouch

accessories

Part no.WERA051024 1889/4 r 1 x1/4”x100

800/1 Z 1 x 0,6x4,5x25; 1 x 1,0x5,5x25; 1 x 1,2x6,5x25

851/1 Z PH 1 x PH 1x25; 1 x PH 2x25; 1 x PH 3x25




the chiseldriver: for fastening and chisellingA screwdriver is very often misused, in that it is struck with a hammer for light chiselling jobs or for loosening rusted screws.This is dangerous because conventional screwdrivers are not appropriate for work of that kind – the grip and/or blade could splinter and cause injuries.The Wera Chiseldriver has been developed specifically for these applications. The head of the handle is fitted with a robust, metal impact cap which is directly connected to the hexagonal blade that extends right through the handle. The full force of hammer blows is thereby transferred. The special, ductile tempering of the blade prevents any splintering and injuries.Even more force can be transferred when screwdriving by fitting an open-jaw or ring spanner over the hex bolster.

Part no. mm mm mm mm mm mm

WERA018260 0,6 3,5 4 80 81 9/64" 3 1/8" 10

WERA018262 0,8 4,5 5 8 90 98 0,178" 3 1/2" 10

WERA018264 1,0 5,5 6 10 100 105 7/32" 4" 10

WERA018266 1,2 7,0 6 10 125 105 9/32" 5" 10

WERA018268 1,6 9,0 8 13 150 112 11/32" 6" 10

WERA018270 1,6 10,0 8 13 175 112 3/8" 7" 5

WERA018272 2,0 12,0 10 16 200 117 1/2" 8" 2

WERA018274 2,5 14,0 10 16 250 117 9/16" 10" 2

Application: Slotted screwsBlade: Hexagonal throughout with impact cap, hexagonal bolster

from 0.8 x 4.5Design: Chrome-plated, Black PointHandle: Kraftform with non-roll feature, multi-component, sizes

2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, Weralit II, single-component

Kraftform Plus Series 900 A hexagon blade made out of high-quality bit material extends right through the handle – thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking.

Kraftform Plus Series 900for fastening and chiselling

932 a Screwdriver for slotted screws

CABAC has a policy of continuous product improvement and reserves the right to change materials and specifications without notice. Drawings, where used, are not to scale. All dimensions are in millimetres and sizes given are approximate. Where available, technical and MSDS data sheets are available on the CABAC website. All CABAC products should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer to CABAC website for terms and conditions on warranty. The one day, one call, one delivery does not cover the following items: Cabchem, Cast Resin kits, Custom manufacturing & kitting, Cabinets, Ladders, Pits & Pillars, CABTRAY & Branch stock orders.

WERADL2013

AustrALIAT: 133 122 | F: 1300 303 310 | E: [email protected] |

W: cabac.com.au

neW ZeALAndT: 0800 77 69 69 | F: 0800 88 69 69 | E: [email protected] |

W: cabac.co.nz

Date post:	07-Apr-2019
Category:	Documents
Upload:	trinhque
View:	216 times
Download:	0 times

DL Brochure - Wera - Cabac · 1212 1313 Kraftform Plus - Series 100 vde the Safety Screwdriver when...

Documents