Home >Documents >DN 15 - 200 Ball Valve - 4.imimg.com4.imimg.com/data4/NX/AC/MY-3682212/needle-valve.pdf · Testing...

DN 15 - 200 Ball Valve - 4.imimg.com4.imimg.com/data4/NX/AC/MY-3682212/needle-valve.pdf · Testing...

Date post:09-Dec-2018
Category:
View:218 times
Download:0 times
Share this document with a friend
Transcript:

DN 15 - 200 Figure ( PN 16 )PN 16 - 40 Figure ( PN 25 )

Figure ( PN 40 )

Design

Split body ball valve.With floating ball.With soft seats.Reduced bored on requestActuator attachment acc. to DIN ISO 5211.

Dimensions (in mm)

15 20 25 32 40 50 65 80 100130 150 160 170 200 230 290 310 350115 120 125 130 140 150 170 180 19060 63 75 97 105 110 120 150 17814 20 24 32 38 48 62 75 97

145 154 175 175 270 290 380 380 5103 4,5 6 8,5 10 14 22 27 38

125 150 200400 480 600325 350 400235 272 342118 144 194510 670 93056 87 125

*) acc. to EN 558-1 section 1 **) acc. to EN 558-1 section 27***) acc. to EN 558-1 section 15

Ball Valve

Fu

ll b

ore

P 92.011

P 92.013

P 92.015

DW

Size DN

Fu

ll b

ore

Size DN L - F1 *)L - F4 **)

H

W

Weight ( PN 40 F4) (kg)

Weight ( PN 40 F5 ) (kg)

L - F1 *)L - F5 ***)

HD

Material

Item

1 Body P250GH (C22.8) 1.0460 TStE355 1.0566 X5CrNi 18 9 1.4301 X5CrNiMo 17 12 2 1.44012 Body part P250GH (C22.8) 1.0460 TStE355 1.0566 X5CrNi 18 9 1.4301 X5CrNiMo 17 12 2 1.44013 Ball X5CrNiMo 17 12 2 1.4401 X5CrNiMo 17 12 2 1.4401 X5CrNi 18 9 1.4301 X5CrNiMo 17 12 2 1.44014 Ball seat ring PTFE PTFE PTFE PTFE5 Body gasket PTFE PTFE PTFE PTFE6 O-ring NBR / Viton Viton Viton Viton7 Stem X5CrNiMo 17 12 2 1.4401 X5CrNiMo 17 12 2 1.4401 X5CrNiMo 17 12 2 1.4401 X5CrNiMo 17 12 2 1.44018 Seal rings PTFE PTFE PTFE PTFE9 O-ring Viton Viton Viton Viton

10 Pressing bush P250GH (C22.8) 1.0460 X5CrNiMo 17 12 2 1.4401 X5CrNiMo 17 12 2 1.4401 X5CrNiMo 17 12 2 1.440111 Lock nut Steel A2-70 A2-70 A2-7012 Screw Steel 8.8 / C35 A2-70 A2-70 A2-7013 Disc spring 50CrV4 50CrV4 50CrV4 50CrV414 Lever Steel Steel Steel Steel15 Anti static device Cr-NI steel Cr-NI steel Cr-NI steel Cr-NI steel16 Stop bolt Steel Steel Cr-NI steel Cr-NI steel

Special materials on request.

Specification

Marking EN19, AD-A4, CEFace-to-face dimensions EN558-1 Basic series (F4 / F5) Flanged ends, dimensions as per EN 1092-1 (DIN 2545/ PN40)Testing standard AD-2000, EN 12266-2 (DIN 3230 section 3)

Stainless steel to DIN

P 92.011 P 92.013 P 92.015

Carbon steel to DINPart name Alloy steel to DIN Stainless steel to DIN

All of our valves are subject to a steady technological progress and improvement. So details might change without prior notification.

DN 1/2" - 8" Figure ( Class 150 )ASME Class 150 - 300 Figure ( Class 300 )

Design

Split body ball valve.With floating ball.With soft seats.Wafer- and Lug-type on request Reduced bore on requestActuator attachment acc. to DIN ISO 5211.

Dimensions (in mm)

1/2" 3/4" 1" 1 1/4" 1 1/2" 2"108 117 127 140 165 178140 152 165 180 191 21660 63 75 97 105 11014 20 24 32 38 48145 154 175 175 270 2903,3 4 5 8,5 9,5 154 5,5 7,5 11 13 19

2 1/2" 3" 4" 5" 6" 8"190 203 229 254 394 457241 283 305 381 403 502120 150 178 235 272 34262 75 97 118 144 194380 380 510 510 670 93023 27 44 65 98 16631 38 49 78 110 170

P 92.054

P 92.056

full

bo

re

Ball Valve

full

bo

re

(class 300) - weight (kg)(class 150) - weight (kg)

(class 150) - LSize DN

(class 300) - weight (kg)(class 150) - weight (kg)

WDH

(class 300) - L

(class 300) - L

WDH

(class 150) - LSize DN

Material

Item

1 Body A105 / A216 WCB A350 LF2 / A 352 LCB A182 F304 A182 F316 / A351 CF8M2 Body part A105 / A216 WCB A350 LF2 / A 352 LCB A182 F304 A182 F316 / A351 CF8M3 Ball AISI 304-316 A182 F51 A182 F304 A182 F316L4 Ball seat ring PTFE PTFE PTFE PTFE5 Body gasket PTFE PTFE PTFE PTFE6 O-ring NBR / Viton Viton Viton Viton7 Stem AISI 316 A350 LF2 A182 F304 A182 F3168 Seal rings PTFE PTFE PTFE PTFE9 O-ring NBR / Viton Viton Viton Viton

10 Pressing bush A105 Zn A350 LF2 A182 F304 A182 F31611 Lock nut Steel A194 8 A194 8 A194 812 Screw Steel A193 B8 A193 B8 A193 B813 Disc spring 17-7PH 17-7PH 17-7PH 17-7PH14 Lever Steel Steel Steel Steel15 Anti static device AISI 316 AISI 316 A182 F304 A182 F31616 Stop bolt Steel Steel Stainless steel Stainless steel

Special materials on request.

Specification

Marking EN19, CEFace-to-face dimensions ASME B16.10Flanged ends, dimensions as per ASME B16.5Pressure-Temperature Rating ASME B16.34Valve Inspection & Testing API 598

AD-2000, EN 12266-2 (DIN 3230 part 3) on request

Stainless steel to ASTM Type F316 (L) / CF8M

Stainless steel to ASTM Type F304 (L)

P 92.054 P 92.056

Carbon steel to ASTM Type WCB / A105

Part nameAlloy steel toASTM Type LF2 / LCB

All of our valves are subject to a steady technological progress and improvement. So details might change without prior notification.

DN 2" - 10" Figure ( Class 150 )ASME Class 150 - 900 Figure ( Class 300 )

Figure ( Class 600 )

Figure

Design

Split-body ball valve.Trunnion mounted ball.With soft seats or metal seats.With full bore.Actuator attachment acc. to DIN ISO 5211.

Dimensions (in mm)

2" 3" 4" 6" 8" 10"178 203 229 394 457 533216 283 305 403 502 568292 356 432 559 660 787368 381 457 610 737 838175 207 237 305 359 41567 82 95 148 200 225450 600 1000 1000 1000 100012 23 32 98 166 35515 31 46 110 170 40030 44 90 160 230 49050 85 140 350 560 810

P 91.054-1

P 91.056-1

P 91.058-1

( Class 900 )P 91.060-1

(Class 600) - L

Ball Valve

(Class 300) - L(Class 150) - L

Size DN

(Class 900) - Weight (kg)

(Class 900) - L

(Class 600) - Weight (kg)(Class 300) - Weight (kg)(Class 150) - Weight (kg)

Lo( max)H2 (max)H1 (max)

Material (DIN-Material on request)

Item

1 Body A105 / A216 WCB A350 LF2 / A 352 LCB A182 F316 / A351 CF8M2 Body part A105 / A216 WCB A350 LF2 / A 352 LCB A182 F316 / A351 CF8M3 Ball A351 CF8M / A105+ENP A182 F316 / A351 CF8M A182 F316 / A351 CF8M

4.1 Ball seat ring compl. PTFE - Glass PTFE - Glass PTFE - Glass4.2 A182 F316 Ti A182 F316 Ti A182 F316 Ti5 Body gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE6 Trunion ENP A105+ENP A350 LF2 A351 CF8M7 Lower stem seal Graphite / PTFE - Glass / Graphite / PTFE - Glass / Graphite / PTFE - Glass

Viton Viton Viton8 Upper stem seal Graphite / PTFE Graphite / PTFE Graphite / PTFE9 Bearing

10 Lower and upper bearingsPTFE / A182 F316 PTFE / A182 F316 PTFE / A182 F31611 Cover A216 WCB / A105 A350 LF2 A182 F316 Ti12 Cover gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE13 Ring A182 F316 Ti A182 F51 A351 CF8M14 Spring 17 - 7PH Inconel 17 - 7PH / Inconel15 Hex. bolt A194 B7 A320L7M A193 B816 Nuts A194 2H A194 7M A194 817 Seat ring gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE18 Gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE19 Stem A 182-F316 A 182-F316 A 182-F31620

Special materials on request.

Specification

Marking EN19, CEFace-to-face dimensions ASME B16.10Flanged ends, dimensions as per ASME B16.5Pressure-Temperature Rating ASME B16.34Valve Inspection & Testing API 598

AD-2000, EN 12266-2 (DIN 3230 part 3) on request

Steel Steel SteelLever

P 91.054-1 P 91.056-1 P 91.058-1 P 91.060-1

Carbon steel to ASTM Type A105 / WCB Part name

Alloy steel to ASTM Type LF2 / LCB

Stainless steel toASTM Type F316 / CF8M

PEEK PEEKPEEK

All of our valves are subject to a steady technological progress and improvement. So details might change without prior notification.

DN 6" - 24" Figure ( Class 150 )ASME Class 150 - 900 Figure ( Class 300 )

Figure ( Class 600 )

Figure ( Class 900 )

Design

Split-body ball valve.Trunnion mounted ball.With soft seats or metal seats.With full bore.Actuator attachment acc. to DIN ISO 5211.

Dimensions (in mm)

6" 8" 10" 12" 14" 16" 18" 20" 24"394 457 533 610 686 762 864 914 1067403 502 568 648 762 838 914 990 1143559 660 787 883 889 991 1092 1194 1397610 737 838 965 1029 1130 1219 1321 1549500 720 770 830 890 980 1130 1250 1360190 200 280 340 390 420 450 490 550500 700 700 700 700 700 1000 1000 1000170 330 505 650 915 1167 1130 1280 1900190 360 535 690 1027 1314 1181 1582 2157200 450 725 910 1050 1270 1860 2420 3420360 570 835 1010 1290 1630 2310 2820 4210

up to DN 28" and up to ANSI Class 1500 on request.

P 91.054-2

P 91.056-2

P 91.058-2

(Class 600) - L(Class 300) - L

Ball Valvewith Hand - Gear

P 91.060-2

(Class 150) - LSize (DN)

D ( max)H2 (max)H1 (max)

(Class 900) - L

(Class 900) - Weight (kg)(Class 600) - Weight (kg)(Class 300) - Weight (kg)(Class 150) - Weight (kg)

Material (DIN-Material on request)

Item

1 Body A105 / A216 WCB A350 LF2 / A 352 LCB A182 F316 / A351 CF8M2 Body part A105 / A216 WCB A350 LF2 / A 352 LCB A182 F316 / A351 CF8M3 Ball A351 CF8M / A105+ENP A182 F316 / A351 CF8M A182 F316 / A351 CF8M

4.1 Ball seat ring compl. PTFE - Glass PTFE - Glass PTFE - Glass4.2 A182 F316 Ti A182 F316 Ti A182 F316 Ti5 Body gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE6 Trunion ENP A105+ENP A350 LF2 A351 CF8M7 Lower stem seal Graphite / PTFE - Glass / Graphite / PTFE - Glass / Graphite / PTFE - Glass

Viton Viton Viton8 Upper stem seal Graphite / PTFE Graphite / PTFE Graphite / PTFE9 Bearing

10 Lower and upper bearings PTFE / A182 F316 PTFE / A182 F316 PTFE / A182 F31611 Cover A216 WCB / A105 A350 LF2 A182 F316 Ti12 Cover gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE13 Ring A182 F316 Ti A182 F51 A351 CF8M14 Spring 17 - 7PH Inconel 17 - 7PH / Inconel15 Hex. bolt A194 B7 A320L7M A193 B816 Nuts A194 2H A194 7M A194 817 Seat ring gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE18 Gasket Graphite / PTFE Graphite / PTFE Graphite / PTFE19 Stem A 182-F316 A 182-F316 A 182-F31620

Special materials on request.

Specification

Marking EN19, CEFace-to-face dimensions ASME B16.10Flanged ends, dimensions as per ASME B16.5Pressure-Temperature Rating ASME B16.34Valve Inspection & Testing API 598

AD-2000, EN 12266-2 (DIN 3230 part 3) on request

P 91.054-2 P 91.056-2 P 91.05-2 P 91.060-2

SteelGear operator SteelSteel

PEEK PEEK PEEK

Carbon steel to ASTM Type A105 / WCB Part name

Alloy steel to ASTM Type LF2 / LCB

Stainless steel toASTM Type F316 / CF8M

All of our valves are subject to a steady technological progress and improvement. So details might change without prior notification.

of 8/8
DN 15 - 200 Figure ( PN 16 ) PN 16 - 40 Figure ( PN 25 ) Figure ( PN 40 ) Design Split body ball valve. With floating ball. With soft seats. Reduced bored on request Actuator attachment acc. to DIN ISO 5211. Dimensions (in mm) 15 20 25 32 40 50 65 80 100 130 150 160 170 200 230 290 310 350 115 120 125 130 140 150 170 180 190 60 63 75 97 105 110 120 150 178 14 20 24 32 38 48 62 75 97 145 154 175 175 270 290 380 380 510 3 4,5 6 8,5 10 14 22 27 38 125 150 200 400 480 600 325 350 400 235 272 342 118 144 194 510 670 930 56 87 125 *) acc. to EN 558-1 section 1 **) acc. to EN 558-1 section 27 ***) acc. to EN 558-1 section 15 Ball Valve Full bore P 92.011 P 92.013 P 92.015 D W Size DN Full bore Size DN L - F1 *) L - F4 **) H W Weight ( PN 40 F4) (kg) Weight ( PN 40 F5 ) (kg) L - F1 *) L - F5 ***) H D
Embed Size (px)
Recommended