DNV GL TYPE APPROVED
LIFTING BEAM SERIES
CAPACITY 1 – 470 T
- YOUR LIFTING PARTNER
SAFE AND
SECURE
SOLUTIONS
IN EVERY
LIFT
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
Key benefits
- Designed by highly skilled and experienced engineers
- Flexibility within lengths & loads
- Multi- or single module based to suit your need
- Type Approved by DNV GL
- Optional lifting-magnet included for easy & safe handling
- Different end termination options / suitable for wire or fibre slings
- User manual to each delivery
- Highly competitive prices and lead times
The WGS Lifting Beam provides full
flexibility and possibility to operate with
different lengths and loads, all in one
beam
Multi-section beam types
The series comes in sizes from 1t to 475t and variable lengths from 1m to 15m (cc) with your choice in end terminations
Type D multi-section components
Exploded view
A
AB
BC
C
D
E
F
G
G
A Lower shackle (4 pcs) E Centre section (variable length)
B End link type D (2 pcs) F End section (variable length)
C Upper shackle (2 pcs) G End fork for type C and D end link (2 pcs)
D End section (variable length)
Assembled view
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
A Lower shackle (2 pcs) E Centre section (variable length)
B End link type C (2 pcs) F End section (variable length)
C Upper shackle (2 pcs) G End fork for type C and D end link (2 pcs)
D End section (variable length)
A
A
B
B
C D
E
F
G
G
C
All lifting beams supported by a step by step user manual to ensure safe assembly
Type C multi-section components
Exploded view
Assembled view
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
Capacity overviewThe WGS beams are designed and constructed to comply with familiar standards and regulations, such as DNV Standard for Certification 2.22 Lifting Appliances, DNV-OS-H205 Lifting Operations, DNV 2.7-3 Portable Offshore Units etc. This results in a highvariation of WLLs for the beams, depending on how and where the lift shall takeplace and what kind of regulations applicable for the lift.
Low load range WGS 1 – 75TThe table below shows the maximum WLL according to criteria specified in Machinery Directive (FOR 2009-05-20 nr 544: Forskrift om maskiner)
CC length(mm)
WGS 1T
WGS 5T
WGS 10T
WGS 20T
WGS 30T
WGS 50T
WGS 75T
1000 3T 10T 34T
1500 3T 10T 34T 55T
2000 3T 10T 34T 55T 80T
2500 3T 10T 34T 55T 80T 105T
3000 3T 10T 34T 55T 80T 105T 132T
3500 3T 10T 34T 55T 80T 105T 132T
4000 3T 10T 34T 55T 80T 105T 132T
4500 3T 10T 34T 55T 80T 105T 132T
5000 3T 10T 34T 55T 80T 105T 132T
5500 3T 10T 34T 55T 80T 105T 132T
6000 3T 10T 34T 55T 80T 105T 132T
6500 3T 10T 34T 55T 80T 105T 132T
7000 3T 10T 34T 55T 80T 105T 132T
7500 3T 10T 34T 55T 80T 105T 132T
8000 3T 10T 34T 55T 78T 105T 132T
8500 2T 10T 34T 55T 69T 99T 130T
9000 2T 10T 34T 49T 61T 88T 116T
9500 2T 10T 34T 44T 55T 79T 104T
10000 2T 10T 34T 40T 50T 71T 94T
10500 2T 10T 34T 36T 45T 65T 85T
11000 2T 10T 34T 33T 41T 59T 78T
11500 2T 9T 34T 30T 38T 54T
12000 1T 8T 34T 27T 34T 50T
12500 1T 8T 34T 25T 32T
13000 1T 7T 31T 23T 30T
13500 1T 7T 29T 22T
14000 1T 6T 27T 20T
14500 1 T 6T 25T
15000 1 T 5T 23T
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
High load range WGS 100 – 400TThe table below shows the maximum WLL according to criteria specified in Machinery Directive (FOR 2009-05-20 nr 544: Forskrift om maskiner)
CC length(mm)
WGS 100T
WGS 150T
WGS 200T
WGS 250T
WGS 300T
WGS 350T
WGS 400T
3000 155T 245T 266T
3500 155T 245T 266T 275T 366T
4000 155T 245T 266T 275T 366T 392T 475T
4500 155T 245T 266T 275T 366T 392T 475T
5000 155T 245T 266T 275T 366T 392T 475T
5500 155T 245T 266T 275T 366T 392T 475T
6000 155T 245T 266T 275T 364T 392T 475T
6500 155T 245T 266T 275T 360T 392T 475T
7000 155T 245T 266T 275T 357T 392T 475T
7500 155T 245T 266T 275T 354T 392T 475T
8000 155T 239T 266T 275T 350T 392T 475T
8500 143T 211T 266T 275T 348T 392T 475T
9000 127T 188T 256T 275T 345T 392T 475T
9500 114T 169T 231T 275T 340T 387T 474T
10000 103T 152T 205T 257T 311T 353T 428T
Necessary input
What information do I
need in order to get a
lifting beam suitable
for my lift?
- Location of crane to be used
- Weight of component(s) to be lifted
- Distance between lifting points of
component(s) to be lifted
- Lifting height from beam to crane hook
- One or more operations
- Operational environment
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
Single-section beam types
If flexibility in lenght is not an issue and your upcominglift is limited to an operation with specified length and load, a single section option may be beneficial
Type D Single-section components
Exploded view
A
B
C E
A
B
C
D
E
A Lower shackle (4 pcs) D Single centre section (variable length)
B End link type D (2 pcs) E End fork for type C and D end link (2 pcs)
C Upper shackle (2 pcs)
Assembled view
W. GIERTSEN SERVICES AS
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
A
B
CE
A
D
E
A Lower shackle (2 pcs) D Single centre section (variable length)
B End link type C (2 pcs) E End fork for type C and D end link (2 pcs)
C Upper shackle (2 pcs)
B
C
The single-section lifting beams are designed using thesame criteria as the multi-module beams, thus the same
dimensions in height and width, the same shackleoptions and the same connecting bolts
Type C Single-section components
Exploded view
W. GIERTSEN SERVICES AS
Assembled view
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
360T / 7100mm (cc)
250T / 6250mm (cc)
147T / 5500mm (cc)25T / 4000mm (cc)
Lifting beam deliveries
200T / 8640mm (cc)
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – Norway
Phone +47 55 94 30 50 Email [email protected]
DNV GL Type Approved lifting beams in operation
W.GIERTSEN SERVICES AS Nygårdsviken 1 - 5165 Laksevåg – Bergen – NorwayPhone +47 55 94 30 50 Email [email protected]
WGS LocationMain Office Bergen, Norway
Contact us for more information
www.giertsenservices.com