22 m
m o
r0.
86 in
ches
202 mm or 7.95 inches
256
mm
or 1
0.07
inch
es
DOES YOUR DEVICE FIT IN OUR 8 SLOT BASKETS? CHECK IT HERE. TEMPLATE A - WITH FOAM.To ensure accurate measurements, please print to scale and on a Ledger size page (portrait).
STEP 1 - Check the device thicknessCheck the thickness of your device here. If the device thickness �ts within the boundaries of this shape, then youare almost there. Move on to STEP 2. If it doesn’t �t, remove the foam insert and measure using TEMPLATE B.
STEP 2 - Check the device dimensionsPlace your device here. If the device �ts within the black boundaries of thisshape, proceed to Step 3.
If it doesn’t �t, remove the foam insert and measure using TEMPLATE B.
STEP 3 - Check device charging pointEnsure that the charging point is above the dashed line. If it does, then youare good to go.
www.lockncharge.com
PLEASE NOTE:It is your responsibility to ensure you measure your device correctly.
If you are planning to use a case with your device, ensure you have it on whilstchecking the compatibility.
If the device is too thick with the case installed, but �ts with the STEP 2 and 3,there is one more option and that is to remove the foam insert from the basketand measure using TEMPLATE B.
If you are still unsure, contact LocknCharge.
DOES YOUR DEVICE FIT IN OUR 8 SLOT BASKETS? CHECK IT HERE. TEMPLATE B - REMOVE FOAM. THIS OPTION IS RECOMMENDED IFYOU ARE STORING DEVICES WITH LARGER CASES.To ensure accurate measurements, please print to scale and on a Ledger size page (portrait).
35 m
m o
r1.
37 in
ches
268
mm
or 1
0.55
inch
es
216 mm or 8.5 inches
STEP 1 - Check the device thickness
go to STEP 2.
STEP 2 - Check the device dimensions
shape, proceed to STEP 3.
STEP 3 - Check device charging pointEnsure that the charging point is above the dashed line. If it does, then you’regood to go.
www.lockncharge.com
PLEASE NOTE:It is your responsibility to ensure you measure your device correctly.If you are still unsure, contact LocknCharge.