Date post: | 17-Jan-2016 |
Category: |
Documents |
Upload: | ferdinand-crawford |
View: | 229 times |
Download: | 1 times |
ZD10 (Zigzag Device)
Check List
ZD10 (Zigzag Device)
Sunstar Precision Co.,Ltd.Sunstar Precision Co.,Ltd.
YES NO
ZD10 Installation (Moving picture)
ZD10 (Zigzag Device)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Write down ZD10 Model No. and S/N.
Model No. :
S/N :
Install date :
Technicain :
Note :
★ If you finish all Checks, click the right button to go back to install page.
- 1 - Sunstar Precision Co.,Ltd.
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES NO
<NOTE>
<NOTE>
2. Is quantity of the boards for ZD10 prepared properly?
◆ ZD10 B/D : EA, Control B/D : EA, SQ Lifting B/D : EA
★ If you finish all Checks, click the right button to check next Check point.
ZD10 (Zigzag Device)
ZD10 Installation (Moving picture)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
1. Is quantity and quality of ZD10 OK?
◆ L-Type : EA, R-Type : EA
- 2 - Sunstar Precision Co.,Ltd.
YES NO
<NOTE>
3. Do you prepare all cables for ZD10?
① Control B/D ↔ Can communication cable
② Sub control B/D ↔ Tension unit cable
③ Sub control B/D ↔ Jump Sol. cable
④ Zigzag motor cable
⑤ Zigzag encoder cable
⑥ ZD10 B/D ↔ Air pressure Sol. power cable
⑦ Air pressure error detection cable
⑧ ZD10 B/D ↔ SQ lifting B/D connecting cable
ZD10 (Zigzag Device)
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
ZD10 Installation (Moving picture)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
★ If you finish all Checks, click the right button to check next Check point.
- 3 - Sunstar Precision Co.,Ltd.
YES NO
<NOTE>
4. Do you prepare all parts of air pressure for ZD10?
① Nipple(KQ2T06-04) and nipple for branch (KQ2t06-00)
② Black and invisible tubes
③ Air pressure Sol.
④ Filter regulator and air pressure Sol. Connecting hose
5. Do you prepare tools and Jigs for installation?
<NOTE>
ZD10 (Zigzag Device)
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
ZD10 Installation (Moving picture)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
★ If you finish all Checks, click the right button to go back to install page.
- 4 - Sunstar Precision Co.,Ltd.
Installarion · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Did you use water hose and level gauge when adjusting level?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 Installation (Moving picture)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
★ If you finish all Checks, click the right button to go back to install page.
- 5 - Sunstar Precision Co.,Ltd.
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
2. Do you confirm important check point of SQ40i(Assy)?
① Do you check state of bolt screwing and scratch and chopping?
② Is the wheel spring tension OK?
③ Is there no jamming on lifting slide?
④ Is the connecting of motor cable OK?
⑤ Is the belt tension OK?
⑥ Are the nipple and cover attached completely?
⑦ Is the air entrance OK?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
★ If you finish all Checks, click the right button to go back to install page.
- 6 - Sunstar Precision Co.,Ltd.
ZD10 Installation (Moving picture)
3. Did you attach jumper pin(end resistor) on the control B/D and last head’s SQ B/D?
① Did you attach jumper pin only on the last head?
② Did you use proper control B/D and ZD10 B/D to specification?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
★ If you finish all Checks, click the right button to go back to install page.
- 7 - Sunstar Precision Co.,Ltd.
ZD10 Installation (Moving picture)
4. Is the cable connections of control B/D and SQ B/D OK?
① Is there no missing cable?
② Is there no miss connecting cable?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
★ If you finish all Checks, click the right button to go back to install page.
- 8 - Sunstar Precision Co.,Ltd.
ZD10 Installation (Moving picture)
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES NO
<NOTE>
ZD10 (Zigzag Device)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
5. Did you check in all check list of air pressure progress?
① Did you check nipple assembling and plug inserting to nipple of the first and last heads?
② Is the air pressure hose connected to nipple completely?
③ Did you check air pressure of Sol. and filter regulator with no missing?
★ If you finish all Checks, click the right button to go back to install page.
- 9 - Sunstar Precision Co.,Ltd.
ZD10 Installation (Moving picture)
6. Did you check all check list of attaching device?
① Are the needlebars and needles of ZD10 proper specification?
② Did you set needlebar setting correctly?
③ Did you set needle drop point by using setting jig?
④ Is there no missing parts?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
ZD10 Installation (Moving picture)
★ If you finish all Checks, click the right button to go back to install page.
- 10 - Sunstar Precision Co.,Ltd.
7. Did you do motor synchronizing(origin setting) correctly?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
ZD10 Installation (Moving picture)
★ If you finish all Checks, click the right button to go back to install page.
- 11 - Sunstar Precision Co.,Ltd.
8. Did you check all check list of ZD10 Check Point confirming?
① Is the direction of finger valve entrance right?
② Did you set tension of driving belt correctly by proper Jig?
③ Is nipple cover “B” centered of nipple?
④ Is the angle of nipple cover “A” and “B” a right angle?
⑤ Did you use zigzag needlebars and standard needles?
⑥ Is there no missing parts?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
ZD10 Installation (Moving picture)
★ If you finish all Checks, click the right button to go back to install page.
- 12 - Sunstar Precision Co.,Ltd.
1. Did you set ZD10 setting properly to specification?
① L-Type R-Type Both-Type Extension
② When origin setting, are cord thread position and assembling screws of pulley collar right?
③ Did you set OP.Box setting correctly?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
ZD10 Installation (Moving picture)
★ If you finish all Checks, click the right button to go back to install page.
- 13 - Sunstar Precision Co.,Ltd.
YES NO
ZD10 (Zigzag Device)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
ZD10 Installation (Moving picture)
Trouble - Shooting · · · · · · · · · · · · · · ·· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Is there any strange symptom?
(When there is strange symptom, write down about the symptom in detail.)
<NOTE>
- 14 - Sunstar Precision Co.,Ltd.
★ If you finish all Checks, click the right button to go back to install page.