16/10/2015 V9.0 1

Features:> High brightness surface mount LED.> 120° viewing angle.> Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.> Compliance to AEC-Q101 Standard.

DomiLEDTM

Synonymous with function and performance, the DomiLEDTM series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness.

DATA SHEET:

DomiLEDTM

AlInGaP : DDP-SJS-NP2-1-I3

© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.All rights reserved. Product specifications are subject to change without notice.

Applications:> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc.> Consumer appliances: LCD illumination as in PDAs, LCD TV.> Communication: indicator and backlight in mobilephone.> Display: full color display video notice board.> Industrial: white goods (eg: Oven, microwave, etc.).

DOMINANTOpto TechnologiesInnovating Illumination

TM

16/10/2015 V9.0 2

DDP-SJS-NP2-1-I3 Pure Green, 560nm 120 28.5

AlInGaP : DDP-SJS-NP2-1-I3

Part OrderingNumber

Color ViewingAngle˚

Luminous Intensity @ IF = 30mA IV (mcd)

NOTE1. All part number above comes in a quantity of 2000 units per reel.2. Luminous intensity is measured with an accuracy of ± 11%.3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.

Vf @ If = 30mA

Forward voltage are measured using a current pulse of 1 ms and with an accuracy of ± 0.1 V.

Electrical Characteristics at Tj=25˚C

Max. (V)Vr @ Ir = 10uA

Min. (V)Part Number

DDP-SJS 2.4 12

Typ. (V)

1.9

Unit

Absolute Maximum Ratings

Maximum Value

DC forward current

Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005)

Reverse voltage

ESD threshold (HBM)

LED junction temperature

Operating temperature

Storage temperature

Power dissipation (at room temperature)

Thermal resistance- Junction / ambient, Rth JA- Junction / solder point, Rth JS(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)

50

1000

12

2000

125

-40 … +100

-40 … +100

120

500280

mA

mA

V

V

˚C

˚C

˚C

mW

K/WK/W

Min. Typ. Max.

45.0 71.5

Optical Characteristics at Tj=25˚C

DOMINANTOpto TechnologiesInnovating Illumination

TM

AlInGaP : DDP-SJS-NP2-1-I3

16/10/2015 V9.0 3

Group

Wavelength Grouping at Tj=25˚C

Color

DDP; Pure Green Full 552.5 - 564.5

Dominant wavelength is measured with an accuracy of ± 1 nm.

Wavelength distribution(nm)

W 552.5 - 555.5

X 555.5 - 558.5

Y 558.5 - 561.5

Z 561.5 - 564.5

N1N2P1P2

28.5...35.535.5...45.045.0...56.056.0...71.5

Brightness Group Luminous Intensity IV (mcd)

Luminous Intensity Group at Tj=25˚C

DOMINANTOpto TechnologiesInnovating Illumination

TM

Luminous intensity is measured with an accuracy of ± 11%.

Unit

CharacteristicsValue

Temperature coefficient of IF = 30mA; 0 ˚C <= T <= 100 ˚C

Temperature coefficient of VF (typ)IF = 30mA; 0 ˚C <= T <= 100 ˚C

Temperature coefficient of IV (typ)IF = 30mA; 0 ˚C <= T <= 100 ˚C

nm / K

Symbol

dom (typ)dom (typ)

TC 0.10

TCV -0.2 mV / K

TCIV -1.0 % / K

DDP-SJS

Part Number

DDP-SJS

DDP-SJS

16/10/2015 V9.0 4

AlInGaP : DDP-SJS-NP2-1-I3

Relative Luminous Intensity Vs Forward Current

Forward Current, mA

Re

lati

ve

In

ten

sit

y,

No

rma

lize

d a

t 2

0m

A

0 10 20 30 40 50 60

0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

1.8

2

2.2

Forward Current Vs Forward Voltage

Forward Voltage, V

Fo

rwa

rd C

urr

en

t, m

A

1.2 1.4 1.6 1.8 2 2.2 2.4

0

5

10

15

20

25

30

35

Maximum Current Vs Temperature

Ambient Temperature

Fo

rwa

rd C

urr

en

t, m

A

0 20 40 60 80 100

0

10

20

30

40

50

60

Relative Intensity Vs Wavelength

Wavelength, nm

Re

lati

ve

In

ten

sit

y

500 600 700 800

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

0.270°

90°

80°

0

60°

50°

40°

30° 20°

0.6

0.4

1.0

0.8

10° 0°

Radiation Pattern

DOMINANTOpto TechnologiesInnovating Illumination

TM

Relative Intensity Vs Forward Current

Forward Current, mA

Rel

ativ

e In

tens

ity; N

orm

aliz

ed a

t 30m

A

0 10 20 30 40 50

0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

Forward Voltage Vs Forward Current

Forward Current; mA

Forw

ard

Volta

ge; V

0 10 20 30 40 50

0

0.5

1

1.5

2

2.5

3

3.5

4

Maximum Current Vs Ambient Temperature

Ambient Temperature

Forw

ard

Cur

rent

, mA

0 10 20 30 40 50 60 70 80 90 100110120

0

10

20

30

40

50

60

Relative Intensity Vs Wavelength

Wavelength, nm

Rel

ativ

e In

tens

ity

400 450 500 550 600 650 700

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

16/10/2015 V9.0 5

DomiLEDTM • AlInGaP : DDP-SJS-NP2-1-I3 Package Outlines

AlInGaP : DDP-SJS-NP2-1-I3

Material

Material

Lead-frame

Package

Encapsulant Soldering Leads

Cu Alloy With Ag Plating

High Temperature Resistant Plastic, PPA

Epoxy

Sn Plating

DOMINANTOpto TechnologiesInnovating Illumination

TM

16/10/2015 V9.0 6

AlInGaP : DDP-SJS-NP2-1-I3

Recommended Solder Pad

DOMINANTOpto TechnologiesInnovating Illumination

TM

16/10/2015 V9.0 7

Taping and orientation

• Reels come in quantity of 2000 units.• Reel diameter is 180 mm.

AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination

TM

16/10/2015 V9.0 8

Packaging Specification

AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination

TM

16/10/2015 V9.0 9

AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination

TM

Packaging Specification

Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs)

0.034 190 ± 10Weight (gram)

CardboardBox

Dimensions (mm) Empty BoxWeight (kg)

Super Small

Small

Medium

Large

For DomiLEDTM

Reel / BoxCardboard BoxSize

Weight (gram) 0.034 240 ± 10

DOMINANT TM

Moisture sensitivity level

Moisture absorbent material +Moisture indicator

The reel, moisture absorbent material and moisture indicator aresealed inside the moisture proof foil bag

Reel

Barcode label

Label

(L) Lot No : lotno

(P) Part No : partno

(C) Cust No : partno

(G) Grouping : group

(Q) Quantity : quantity

(D) D/C : date code

(S) S/N : serial no

DOMINANT Opto TechnologiesML TEMP2 260˚CRoHS Compliant

Made in Malaysia

DOMINANT Opto Technologies DRND-008

Issue No : 1 Page 1 of 3

Product & Process Change Notice (PCN)

PCN No: D140157 Date: 21-Nov -2014

1. Describe present process / product:

All SMD LEDs that are currently shipped in the reel form. Please refer to section 3 for

the details; comparing current packing and label specification versus change proposed.

2. Product type affected:

All SMD LEDs that are currently shipped in the reel form.

3. Describe changes (to be):

Existing barcode printed label (BPL) used is as shown below.

Existing BPL size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL format will be

changed to the following.

New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barcode data are

implemented now for every data field.

325 x 225 x 190

325 x 225 x 280

570 x 440 x 230

570 x 440 x 460

0.38

0.54

1.46

1.92

9 reels MAX

15 reels MAX

60 reels MAX

120 reels MAX

16/10/2015 V9.0 10

Time (sec)0 50 100 150 200

300

250

225

200

175

150

125

100

75

50

25

275

Tem

pera

ture

(˚C

)Classification Reflow Profile (JEDEC J-STD-020C)

Ramp-up3˚C/sec max.

255-260˚C10-30s

60-150s

Ramp-down

6˚C/secmax.

Preheat 60-180s

480s max

217˚C

Recommended Pb-free Soldering Profile

AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination

TM

Revision History

NOTE

All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT

Opto Technologies does not assume any liability arising out of the application or use of any product described herein.

DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function

or design.

DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems

without the express written approval from the Managing Director of DOMINANT Opto Technologies.

Page

-

1

-

4

3

2

1, 9

Subjects

New Format

Typo error on features

Update company name

Typo error on “Relative Luminous Intensity vs Forward Current” graph

Add Characteristics

Add Thermal Resistance

Add FeaturesUpdate Packaging Specification

Date of Modification

24 Nov 2006

04 Mar 2009

31 May 2010

12 Apr 2011

22 Feb 2012

24 Oct 2012

16 Oct 2015

AlInGaP : DDP-SJS-NP2-1-I3

16/10/2015 V9.0 11

DOMINANTOpto TechnologiesInnovating Illumination

TM

AlInGaP : DDP-SJS-NP2-1-I3

About Us

DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as in-dustrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.

DOMINANTOpto TechnologiesInnovating Illumination

TM

Please contact us for more information:

Head Quarter

DOMINANT Opto Technologies Sdn. Bhd.Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, MalaysiaTel: (606) 283 3566 Fax: (606) 283 0566E-mail: sales@dominant-semi.com

DOMINANTOpto TechnologiesInnovating Illumination

TM