16/10/2015 V9.0 1
Features:> High brightness surface mount LED.> 120° viewing angle.> Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.> Compliance to AEC-Q101 Standard.
DomiLEDTM
Synonymous with function and performance, the DomiLEDTM series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness.
DATA SHEET:
DomiLEDTM
AlInGaP : DDP-SJS-NP2-1-I3
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.All rights reserved. Product specifications are subject to change without notice.
Applications:> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc.> Consumer appliances: LCD illumination as in PDAs, LCD TV.> Communication: indicator and backlight in mobilephone.> Display: full color display video notice board.> Industrial: white goods (eg: Oven, microwave, etc.).
DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V9.0 2
DDP-SJS-NP2-1-I3 Pure Green, 560nm 120 28.5
AlInGaP : DDP-SJS-NP2-1-I3
Part OrderingNumber
Color ViewingAngle˚
Luminous Intensity @ IF = 30mA IV (mcd)
NOTE1. All part number above comes in a quantity of 2000 units per reel.2. Luminous intensity is measured with an accuracy of ± 11%.3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
Vf @ If = 30mA
Forward voltage are measured using a current pulse of 1 ms and with an accuracy of ± 0.1 V.
Electrical Characteristics at Tj=25˚C
Max. (V)Vr @ Ir = 10uA
Min. (V)Part Number
DDP-SJS 2.4 12
Typ. (V)
1.9
Unit
Absolute Maximum Ratings
Maximum Value
DC forward current
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005)
Reverse voltage
ESD threshold (HBM)
LED junction temperature
Operating temperature
Storage temperature
Power dissipation (at room temperature)
Thermal resistance- Junction / ambient, Rth JA- Junction / solder point, Rth JS(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)
50
1000
12
2000
125
-40 … +100
-40 … +100
120
500280
mA
mA
V
V
˚C
˚C
˚C
mW
K/WK/W
Min. Typ. Max.
45.0 71.5
Optical Characteristics at Tj=25˚C
DOMINANTOpto TechnologiesInnovating Illumination
TM
AlInGaP : DDP-SJS-NP2-1-I3
16/10/2015 V9.0 3
Group
Wavelength Grouping at Tj=25˚C
Color
DDP; Pure Green Full 552.5 - 564.5
Dominant wavelength is measured with an accuracy of ± 1 nm.
Wavelength distribution(nm)
W 552.5 - 555.5
X 555.5 - 558.5
Y 558.5 - 561.5
Z 561.5 - 564.5
N1N2P1P2
28.5...35.535.5...45.045.0...56.056.0...71.5
Brightness Group Luminous Intensity IV (mcd)
Luminous Intensity Group at Tj=25˚C
DOMINANTOpto TechnologiesInnovating Illumination
TM
Luminous intensity is measured with an accuracy of ± 11%.
Unit
CharacteristicsValue
Temperature coefficient of IF = 30mA; 0 ˚C <= T <= 100 ˚C
Temperature coefficient of VF (typ)IF = 30mA; 0 ˚C <= T <= 100 ˚C
Temperature coefficient of IV (typ)IF = 30mA; 0 ˚C <= T <= 100 ˚C
nm / K
Symbol
dom (typ)dom (typ)
TC 0.10
TCV -0.2 mV / K
TCIV -1.0 % / K
DDP-SJS
Part Number
DDP-SJS
DDP-SJS
16/10/2015 V9.0 4
AlInGaP : DDP-SJS-NP2-1-I3
Relative Luminous Intensity Vs Forward Current
Forward Current, mA
Re
lati
ve
In
ten
sit
y,
No
rma
lize
d a
t 2
0m
A
0 10 20 30 40 50 60
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
Forward Current Vs Forward Voltage
Forward Voltage, V
Fo
rwa
rd C
urr
en
t, m
A
1.2 1.4 1.6 1.8 2 2.2 2.4
0
5
10
15
20
25
30
35
Maximum Current Vs Temperature
Ambient Temperature
Fo
rwa
rd C
urr
en
t, m
A
0 20 40 60 80 100
0
10
20
30
40
50
60
Relative Intensity Vs Wavelength
Wavelength, nm
Re
lati
ve
In
ten
sit
y
500 600 700 800
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0.270°
90°
80°
0
60°
50°
40°
30° 20°
0.6
0.4
1.0
0.8
10° 0°
Radiation Pattern
DOMINANTOpto TechnologiesInnovating Illumination
TM
Relative Intensity Vs Forward Current
Forward Current, mA
Rel
ativ
e In
tens
ity; N
orm
aliz
ed a
t 30m
A
0 10 20 30 40 50
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
Forward Voltage Vs Forward Current
Forward Current; mA
Forw
ard
Volta
ge; V
0 10 20 30 40 50
0
0.5
1
1.5
2
2.5
3
3.5
4
Maximum Current Vs Ambient Temperature
Ambient Temperature
Forw
ard
Cur
rent
, mA
0 10 20 30 40 50 60 70 80 90 100110120
0
10
20
30
40
50
60
Relative Intensity Vs Wavelength
Wavelength, nm
Rel
ativ
e In
tens
ity
400 450 500 550 600 650 700
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
16/10/2015 V9.0 5
DomiLEDTM • AlInGaP : DDP-SJS-NP2-1-I3 Package Outlines
AlInGaP : DDP-SJS-NP2-1-I3
Material
Material
Lead-frame
Package
Encapsulant Soldering Leads
Cu Alloy With Ag Plating
High Temperature Resistant Plastic, PPA
Epoxy
Sn Plating
DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V9.0 6
AlInGaP : DDP-SJS-NP2-1-I3
Recommended Solder Pad
DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V9.0 7
Taping and orientation
• Reels come in quantity of 2000 units.• Reel diameter is 180 mm.
AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V9.0 8
Packaging Specification
AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V9.0 9
AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination
TM
Packaging Specification
Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs)
0.034 190 ± 10Weight (gram)
CardboardBox
Dimensions (mm) Empty BoxWeight (kg)
Super Small
Small
Medium
Large
For DomiLEDTM
Reel / BoxCardboard BoxSize
Weight (gram) 0.034 240 ± 10
DOMINANT TM
Moisture sensitivity level
Moisture absorbent material +Moisture indicator
The reel, moisture absorbent material and moisture indicator aresealed inside the moisture proof foil bag
Reel
Barcode label
Label
(L) Lot No : lotno
(P) Part No : partno
(C) Cust No : partno
(G) Grouping : group
(Q) Quantity : quantity
(D) D/C : date code
(S) S/N : serial no
DOMINANT Opto TechnologiesML TEMP2 260˚CRoHS Compliant
Made in Malaysia
DOMINANT Opto Technologies DRND-008
Issue No : 1 Page 1 of 3
Product & Process Change Notice (PCN)
PCN No: D140157 Date: 21-Nov -2014
1. Describe present process / product:
All SMD LEDs that are currently shipped in the reel form. Please refer to section 3 for
the details; comparing current packing and label specification versus change proposed.
2. Product type affected:
All SMD LEDs that are currently shipped in the reel form.
3. Describe changes (to be):
Existing barcode printed label (BPL) used is as shown below.
Existing BPL size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL format will be
changed to the following.
New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barcode data are
implemented now for every data field.
325 x 225 x 190
325 x 225 x 280
570 x 440 x 230
570 x 440 x 460
0.38
0.54
1.46
1.92
9 reels MAX
15 reels MAX
60 reels MAX
120 reels MAX
16/10/2015 V9.0 10
Time (sec)0 50 100 150 200
300
250
225
200
175
150
125
100
75
50
25
275
Tem
pera
ture
(˚C
)Classification Reflow Profile (JEDEC J-STD-020C)
Ramp-up3˚C/sec max.
255-260˚C10-30s
60-150s
Ramp-down
6˚C/secmax.
Preheat 60-180s
480s max
217˚C
Recommended Pb-free Soldering Profile
AlInGaP : DDP-SJS-NP2-1-I3DOMINANTOpto TechnologiesInnovating Illumination
TM
Revision History
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
Page
-
1
-
4
3
2
1, 9
Subjects
New Format
Typo error on features
Update company name
Typo error on “Relative Luminous Intensity vs Forward Current” graph
Add Characteristics
Add Thermal Resistance
Add FeaturesUpdate Packaging Specification
Date of Modification
24 Nov 2006
04 Mar 2009
31 May 2010
12 Apr 2011
22 Feb 2012
24 Oct 2012
16 Oct 2015
AlInGaP : DDP-SJS-NP2-1-I3
16/10/2015 V9.0 11
DOMINANTOpto TechnologiesInnovating Illumination
TM
AlInGaP : DDP-SJS-NP2-1-I3
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as in-dustrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
DOMINANTOpto TechnologiesInnovating Illumination
TM
Please contact us for more information:
Head Quarter
DOMINANT Opto Technologies Sdn. Bhd.Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, MalaysiaTel: (606) 283 3566 Fax: (606) 283 0566E-mail: [email protected]
DOMINANTOpto TechnologiesInnovating Illumination
TM