1 Door closers
Door closersTechnical information
The global leader in door opening solutions.
2 Door closers
Unlock your life.
In a world where secure, safe and convenient door openings are a must, ASSA ABLOY has built a business able to supply a market anywhere in the world.
ASSA ABLOY supply products for a total door solution including products connected to, attached to or surrounding a door. Their mechanical, electromechanical and electronic products enable ASSA ABLOY to meet a clients needs from security, safety, design and convenience in door opening solutions.
ASSA ABLOY South Africa is popular for traditional lines such as pin tumbler, lever locks and architectural ironmongery, which have been supplied to the market for over a century.
We are leading the trend towards higher security, with products including electric locks and elecronic keys with audit trail capabilities, hotel safes, magentic locks, mechanical locks, access control, revolving, sliding and stacking door sytems, window latches, aluminium products and emergency escape hardware.
We are able to offer you a locking solution for all your locking applications with a convenient and reliable solution for your requirements.
3 Door closers ContentsWhere can I �nd everything?
Introduction to door closers 5
DC120 12
DC130 14
DC140 16
DC200 18
DC300 22
DC300DA 26
DC300TANDEM 30
DC500 36
DC700 42
DC640 48
FD460-DC700 52
FD461-DC700 56
FD462-DC700 60
FD464-DC700 64
DC 420 69
DC475 75
DC477 81
DC820 88
DC840 92
DC860 96
4 Door closers
ASSA ABLOY door closers
Come closer and learn about the new door closers from ASSA ABLOY.
For a whole range of applications and door typesASSA ABLOY�s door closers are ideal for a wide range of situations � from private homes to the commercial or public sector and for heavy or lightweight doors. The modular design simpli�es planning, while the intelli-gent setting adjustment and installation features en-sure easy installation. The door closer range is a joint development between companies in the ASSA ABLOY Group.
Continuous design for sophisticated con�gurationA uniform design gives rooms and buildings style and aesthetic appeal. To achieve a uniform appearance, especially in large buildings, ASSA ABLOY door closers offer attractive design with varying performance features across the entire product range.ASSA ABLOY door closers are available in RAL colours.
Advantages in brief· Improved convenience when using doors thanks to
®Cam-Motion Technology®· A single Cam-Motion closer design for all four
mounting positions· Invisible mounting plate for all models· Height-adjustable axis· Height-adjustable guide rail· Adjustable starting point for latching speed and
backcheck · Uniform mounting points· Smoke detector harmoniously integrated into the
guide rails· Traversable, electromechanical hold open device· Consistent design· Unrestricted functionality even in the event of ex-
treme temperature �uctuations
Adjustment settings easily madeA door is exposed to various stresses on a daily basis: operation by its users, temperature �uctuations, air humidity.The door hinge wears out, the door �settles� and the door�s closing performance can deteriorate. ASSA ABLOY door closers can be easily adapted to any changes in structural or usage conditions after being installed. ASSA ABLOY door closers simplify adjustments during the mounting process with clever functions. Installation tolerances can be compensated without special com-ponents thanks to the height-adjustable axis. Height compensation of 14mm takes all structural conditions into account. The arm height can be adjusted quickly and easily and the closing function is set up optimally.
Invisisble mounting plate
Height-adjustable axis
Height-adjustable guide rail
Adjustable backcheck
5 Door closers Come closer!
6 Door closers
Description of adjustable functions:
Closing speedSpeed of door leaf during closing.
Latching speedSpeed of closing door leaf at opening angles between 0° and 15° until it reaches its closed position.
BackcheckOpening motion is hydraulically slowed down from an opening angle of about 75°.
Closing delayDelay in the closing speed between about 120° and 70°.
Overview of functions DC700 DC500 DC640 DC300 DC200 DC347 DC140 DC120
EN door closer size 3 - 6 1 - 4 3 - 4 / 3 - 6 3 - 6 2 - 4 5 - 7 2 / 3 / 4 2 / 3 / 4
Closing speed � � � � � � �
Latching speed � � � � � � �
Back check � � � � � � �
Delayed action � � � ° � � �
Smoke- and �re protec. doors � � � � � � �
CE marked � � � � � � �
ASSA ABLOY door closers �Overview of functions and mounting positions
� = Standard° = Optional
Overview of functions DC110 DC860 DC840 DC820 DC340 DC130 DC475 DC477 DC420
EN door closer size 3 1 - 5 1 - 4 2 / 3 1 - 4 3 3 - 6 2 - 4 2 / 3 / 4
Closing speed � �
Latching speed � �
Back check � �
Delayed action � �
CE marked � �
N/AN/AN/AN/A N/A
N/A
�
�
�
�
�
�
�
�
�
�
7 Door closers
Single leaf door systems Single leaf doorsup to 1,100 mm
Single leaf doorsup to 1,400 mm
Single leaf doorsup to 1,400 mmhold-open function
Single leaf doors up to 1,400 mmsmoke detector
Guide rail DC500, DC130 Hinge side(950 mm)
DC700 DC700G-E, DC700/G460
(950 mm)DC700 DC700G-E, DC700/G460
Double leaf door systems Double leaf doors up to 2,800 mm
Double leaf doors up to 2,800 mm hold-open function
Double leaf doors up to 2,800 mm smoke detector
Guide rail DC700G-CO, DC700/G461Hinge side DC700G-CO-E, DC700/G462, DC700/G464
DC700G-CO-S
DC700/G461Non-hinge side DC700/G462, DC700/G464
This overview will help you to �nd the right closer system for your usage requirements with rapidly decreasing opening torque thanks to
The door closer matrix �
®Cam-Motion .
Use this table to �nd the right door closer for your requirements
All mounting positions with a guide rail door closer
1 Normal mounting on hinge side
2 Frame mounting on hinge side
3 Normal mounting on non-hinge side
4 Frame mounting on non-hinge side
1
3
2
4
DC700G-S
DC840, DC820 (950 mm)Concealed
DC700G-S
DC840, DC820 (950 mm)Concealed (950 mm)
DC200, DC140, DC120, Hinge side(950 mm)
DC300 Tandem, DC300 (DA)
DC200, DC140, DC120, Non-hinge side(950 mm)
DC300 Tandem, DC300 (DA)
DC475
DC640 (guide rail)Free swing
Floor spring DC477
DC640 (link arm)
Non-Hinge side DC500, DC130
, DC420
8 Door closers ASSA ABLOY door closersuse state-of-the-art technology
Safe in an emergencyYou�ll be on the safe side with ASSA ABLOY, since our door closers meet national and international provisions and regulations.Smoke protection and �re doors may only be �tted with door closer systems complying with EN1154/EN1155/EN1158. ASSA ABLOY supplies approved door closer systems for single and double leaf smoke and �re doors with differ-ent usage requirements.
EN 1154This standard speci�es the technical requirements, in-cluding those for �re and smoke protection doors, for hand-operated door closing devices on swing doors
with a controlled closing cycle, for which the closing energy is applied by the user when opening the door.
EN 1155This standard speci�es the requirements for stand-alone hold open devices or those built into door closers may be used on �re and smoke protection doors.
EN 1158This standard speci�es requirements for both separatly mounted door coordinator devices and door coordi-nator mechanisms incorporated in door closers. There are additional requirements for devices for use on �re/smoke door assemblies included.
Explanation of standards:
Example and explanation of CE marking on Door Closer DC300 in accord-ance with DIN EN1154:
10
8 6 1 13
4 41162-CPD-0485 EN1154:1996+A1:2002
ASSA ABLOYSicherheitstechnik GmbHBildstockstraße 2072458 Albstadt
Dangerous substances: None
CE mark Manufacturer & address
Year of issue for CE mark (the last two �gures)(may also be indicated separately on the door closer)
Certi�cation centre number � certi�cate number
Standard for door closer,number and issue date
Door closerclassi�cation*
Hazardous substances, if any are present:Quantity/contents
* Explanation of classi�cation key4 = Closing of doors from open position of 180°8 = Endurance test of 500,000 test cycles3/6 = Door closer size 3-61 = Suitable for use with �re and smoke protection doors 1 = Meets key requirements for safe usage 4 = Very high corrosion resistance
Door closer EN size Recommended door leaf widthmm max.
Closing torquebetween 0° and 4°
Nm min. Nm max.
Opening torque between 0° and 60°
Nm max.
1 750 9 13 26
2 850 13 18 36
3 950 18 26 47
4 1,100 26 37 62
5 1,250 37 54 83
6 1,400 54 87 134
7 1,600 87 140 215
EN 1154: Controlled door closing devices.Overview recommended door closer data.
9 Door closers ASSA ABLOY door closers®Cam-Motion for optimum convenience in opening
doors
Rapidly decreasing ® torque in a Cam-Motion
door closer from ASSA ABLOY
100%
60%
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Angle (Degrees)
Torq
ue
Recommendation CEN TR 15894
Door closer with®Cam Motion Technology
CEN TR 15894CEN TR 15894 is a technical report on the use of build -ing hardware, door systems and associated products in buildings. The aim of the report is to ensure designs for safer, more reliable and more convenient use of doors for residents in buildings, placing particular focus on chil-dren, the elderly and the disabled.The key recommendation for users is to install a door closer which incorporates a rapidly decreasing open-ing torque. To ensure that this is the case, the force which a user needs to apply to open the door up to 60° must be reduced by 40%.
®Cam-Motion Technology®ASSA ABLOY Cam-Motion Technology enables guide
rail door closers to comply with CEN TR 15894 requirements.
Explanation of the standard:
10 Door closers
11 Door closers Guide rail systemsCompact and versatile
Guide rail door closers ®This versatile system allows ASSA ABLOY Cam-Motion
door closers with different guide rail designs to be used for almost any application. The comprehensive guide rail range enables the required functions to be used in both single leaf and double leaf doors.
These systems can provide reliable, automatic closing of doors and electro-mechanical securing of �re and smoke protection barriers.The smoke detector seamlessly integrated into the guide rail safely monitors electro-mechanically secured doors and closes them quickly in the event of an emergency.
The wedge system used in double leaf doors models ensures that doors are closed safely in the correct order � �rst the inactive leaf, followed by the active leaf.
ASSA ABLOY � versatile systems for almost any type of use
12 Door closers
11
8 1 14 41162-CPD-0535EN 1154:1996+A1:2002+AC:2006
ASSA ABLOYSicherheitstechnik GmbHBildstockstraße 2072458 Albstadt
Dangerous substances: None
2/3/4
DC120
20274
220
19 52
544558
16
97,5
18
47248
Project planners - Compact design- Favourably priced, reliable closer model
Builders - Quick and easy installation- Suitable for left and right handed doors- Easy to adjust
Trade - Inexpensive closer model for standard doors- All-inclusive package with door closer and link arm
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glanceCustomer segment Advantages
ASSA ABLOY DC120 · Rack and pinion door closer with link arm · Certi�ed in compliance with EN 1154, size 2/3/4 · For single action doors up to 1100 mm
Characteristics DC120 · Can be used for left and right-handed doors · Suitable for �re and smoke protection doors · Closing speed, latching speed and backcheck conti-
nuously adjustable using regulating valves · Thermodynamic valves for consistent performance · Closing force con�gurable · Opening angle up to 180° (105° in mounting positi-
on EN size 4) · Standard colours: silver EV1; white, similar to
RAL9016; black, similar to RAL9005
F
13 Door closers DC120
Door width up to 950 mm (1.100 mm)
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Weight 1.6 kg
Height 52 mm
Depth 47 mm
Length 220 mm
Certi�ed in compliance with EN 1154
CE marking for building products yes
Closing force con�gurable EN 2/3 (4)
Backcheck Variable above 75°
Fire and smoke protection yes
DIN door swing directions
Technical attributes
Left / right handed
Technical attributes
(387)
60,5
97,5
307
Required space on doorsLeft handed shown in diagramRight handed is the re-verse
195
96 202
45
59
Installation dimensions EN2
96 202
195 45
43
Installation dimensions EN3
176 202
275 45
43
Installation dimensions EN4
Speci�cations for DC120ASSA ABLOY Door Closer DC120 featuring rack and pinion technology in compliance with EN 1154 · Closing force con�gurable, EN size 2/3 (4), for doors
up to 950 mm (1,100 mm) wide · Closing speed, latching speed and backcheck conti-
nuously adjustable · Suitable for �re and smoke protection doors · CE approved · Suitable for left and right handed doors
Colour:Silver EV1White, similar to RAL9016Black, similar to RAL9005
Description Order no.
DC120, EN size 2/3 (4), silver EV1
DC120 EN, size 2/3 (4), white, similar to RAL 9016
DC120 EN size 2/3 (4), black, similar to RAL9005
DC120 body EN size 2/3 (4), silver EV1
DC120 body EN size 2/3 (4), white, similar to RAL9016
DC120 body EN size 2/3 (4), black, similar to RAL9005
Description Order no.
DC120 EN, size 2/3 (4), brown, similar to RAL8014
DC120 body EN size 2/3 (4), brown, similar to RAL8014
Hold-open link arm L141, silver EV1
Hold-open link arm L141, white, similar to RAL9016
Hold-open link arm L141, black, similar to RAL9005
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
14 Door closers
04
8 3 1 14 31121-CPD-AD0021 EN 1154:1996+A1:2002
ASSA ABLOY AUBE ANJOU10 avenue de L'EuropeParc d'Enterprises du Grand Troyes10300 Sainte Savine
Dangerous substances: None
DC130
456
494
76 100
233
45
42
60
20
31
23
37
Project planners - Inexpensive guide rail door closer- Compact design
Builders - Quick and easy installation- Suitable for left and right handed doors- Easy to adjust
Trade - Inexpensive closer model for standard doors- All-inclusive package with door closer and guide rail
User - Thermodynamic valves- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glanceCustomer segment Advantages
ASSA ABLOY DC130 · Rack and pinion door closer with guide rail · Certi�ed in compliance with EN 1154, size 3 · For single action doors up to 950 mm
Characteristics DC130 · Can be used for left and right-handed doors · Suitable for �re and smoke protection doors · Closing speed, latching speed and backcheck conti-
nuously adjustable using regulating valves · Thermodynamic valves for consistent performance · Standard colours: silver EV1; white, similar to
RAL9016; black, similar to RAL9005
F
15 Door closers DC130
Closing force EN 3
Door width up to 950 mm
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Weight 2.4 kg
Height 60 mm
Depth 42 mm
Length 233 mm
Certi�ed in compliance with EN 1154
CE marking for building products yes
Backcheck Variable above 75°
Fire and smoke protection yes
DIN door swing directions
Technical attributes
Left / right handed
Technical attributes
598
349
66,5
99,5
Required space on doorsLeft handed shown in diagramRight handed is the re-verse
123 456
215 100
45
14
37
Installation dimensionsInstallation dimensions EN3
Speci�cations for DC130ASSA ABLOY Door Closer DC130 featuring rack and pinion technology with guide rail in compliance with EN 1154 · Closing force EN size 3, for doors up to 950 mm
wide · Closing speed, latching speed and backcheck conti-
nuously adjustable · Suitable for �re and smoke protection doors · CE approved · Suitable for left and right handed doors
Colour: Silver EV1 White, similar to
RAL9016 Black, similar to
RAL9005
Description Order no.
DC130 EN, size 3, silver EV1
DC130 EN size 3, white, similar to RAL9016
DC130 EN size 3, black, similar to RAL9005
Description Order no.
Mechanical hold-open device A163
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
16 Door closers
11
8 1 14 41162-CPD-0534 EN 1154:1996+A1:2002
ASSA ABLOYSicherheitstechnik GmbHBildstockstraße 2072458 Albstadt
Dangerous substances: None
2/3/4
DC140
73 19
206
100
3935
90
4558
16
55
4018240
Project planners - Compact design- Modern design- Favourably priced, reliable closer model
Builders - Quick and easy installation- Can be used for left and right-handed doors- Easy to adjust
Trade - Inexpensive closer model for standard doors- All-inclusive package with door closer and link arm
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glanceCustomer segment Advantages
ASSA ABLOY DC140 · Rack and pinion door closer with link arm · Certi�ed in compliance with EN 1154, size 2/3/4 · For single action doors up to 1100 mm wide
Characteristics DC140 · Can be used for left and right-handed doors · Suitable for �re and smoke protection doors · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Closing force con�gurable · Opening angle up to 180° · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005
F
17 Door closers DC140
Closing force con�gurable EN 2/3/4
Door width up to 1100 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Weight 1.75 kg
Height 55 mm
Depth 40 mm
Length 206 mm
Certi�ed in compliance with EN 1154
CE marking for building products
Technical attributes
yes
Technical attributes
( 3 24)274
5990
Required space on doorsLeft handed shown in diagramRight handed is the re-verse
222 45
160 100
Installation dimensions EN2
222 45
210 100
Installation dimensions EN3
222 45
210 100
Installation dimensions EN4
Hin
ge
EN 3
/4
EN 2
ISO 15065-56,5 143
56,5 143
206
12,5
15
30
55
Mounting Plate A161
Speci�cations for DC140ASSA ABLOY Door Closer DC140 featuring rack and pinion technology in compliance with EN 1154 · Closing force con�gurable, EN size 2/3/4, for doors
up to 1100 mm wide · Closing speed, latching speed and backcheck conti-
nuously adjustable · Suitable for �re and smoke protection doors · CE approved · Suitable for left and right handed doors
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005
Description Order no.
DC140 EN size 2/3/4, silver EV1
DC140 EN size 2/3/4, white, similar to RAL9016
DC140 EN size 2/3/4, brown, similar to RAL8014
DC140 EN size 2/3/4, black, similar to RAL9005
DC140 body EN size 2/3/4, silver EV1
DC140 body EN size 2/3/4, white, similar to RAL9016
DC140 body EN size 2/3/4, brown, similar to RAL8014
DC140 body EN size 2/3/4, black, similar to RAL9005
Link arm L140, silver EV1
Link arm L140, white, similar to RAL9016
Link arm L140, brown, similar to RAL8014
Link arm L140, black, similar to RAL9005
Description Order no.
Hold-open link arm L141, silver EV1
Hold-open link arm L141, white, similar to RAL9016
Hold-open link arm L141, brown, similar to RAL8014
Hold-open link arm L141, black, similar to RAL9005
Guide rail G143, silver EV1
Guide rail G143, white, similar to RAL9016
Guide rail G143, black, similar to RAL9005
Mounting Plate A161, silver EV1
Mounting Plate A161, white, similar to RAL9016
Mounting Plate A161, brown, similar to RAL8014
Accessories:
Mounting Plate A161, black, similar to RAL9005
Link arm L140 Link arm L141 Guide rail G143 Mounting Plate A161
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
18 Door closers DC200
60
24 10083
223
4558
97,6
16,2
43
38
47
24,5256
F
ASSA ABLOY DC200 · Rack and pinion closer with link arm L190 · Certi�ed in compliance with EN 1154, size 2-4 · Suitable for �re and smoke protection doors · For single action doors up to 1100 mm wide
Characteristics DC200 · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · Can be used for left and right-handed doors · Axis height-adjustable up to 14 mm · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 180° · Effective backcheck and latching speed range adjus-
table · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005
· Customised �nishes available on request
Characteristics for hold open link arm L191 · Hold-open angle adjustable up to 150° · Hold-open mode can be enabled and disabled as
required · Same installation as link arm · Cannot be used with �re and smoke protection
doors
10
8 4 1 12
4 41162-CPD-0484 EN 1154:1996+A1:2002
ASSA ABLOYSicherheitstechnik GmbHBildstockstraße 2072458 Albstadt
Dangerous substances: None
19 Door closers DC200
Variable adjustable closing force EN 2-4
Door width up to 1100 mm
Fire and smoke protection Yes
DIN door swing directions Left / right handed
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Hold-open mode (with hold-open link arm L191) Adjustable 75°-150°, can be enabled and disabled
Weight 1.6 kg
Height 60 mm
Depth 47 mm
Length 223 mm
Certi�ed in compliance with EN 1154
CE marking for building products Yes
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design- Ful�ls barrier-free building requirements- Same dimensions and design with and without mounting plate
Builders - One drilling template overall- Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors, in both door and frame mounted applications
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Easier door opening and improved accessibility due to reapidly decreasing torque- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC200ASSA ABLOY Door Closer DC200 featuring rack and pinion technology in compliance with EN 1154 · Closing power variable adjustable, EN size 2-4, for
doors up to 1100 mm wide · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · CE approved · 14 mm height adjustable arm system for ease of
�tting · Suitable for left and right handed doors
Accessories:Link arm L190Hold-open link arm L191Mounting plate A120Angle bracket A122Parallel arm bracket for parallel arm moun-ting A154Glass door shoe A164
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Customised �nish
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
20 Door closers DC200Dimensional drawings
66,5
97,5
329,5
Required space on doorsLeft handed shown in diagram. Right handed is the reverse
12max.
15
43
38
213,5
43
15
45
38
222
100
Installation dimensions for direct mountingLeft handed shown in diagram. Right handed is the reverse
142
222 45
160
42
16
65
Installation dimensions with mounting plateIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram. Right handed is the reverse
222 45
100
43
213,5
15 3
8
Frame mountingCloser on non-hinge side of door frameRight handed door shown in diagramLeft handed door is the reverse
16
42
142
160
65
222 45
Installation dimensions with mounting plate for frame mountingCloser on non-hinge side of door frame. For doors where direct mounting is not possible.Right handed door shown in diagram.Left handed door is the reverse
21 Door closers DC200Accessories
ISO 15065-57
6,5
16
33
,51
6
183
56
160
Mounting plate A120For mounting with dril-ling template acc. to EN 1154 Supplement 1 (�re and smoke protection doors) and for universal use
42
16
65
ISO 15065-5
223
40
5
5
65
18
30
29,510
50173
213
Angle bracket A122For frame mounting in case of deep jamb, he-adroom reduced by 70 mm.Check suitability for use on �re and smoke pro-tection doors.
5
95
ISO 15065-5
44
810
58
64
954
25
Parallel arm bracket A154For Parallel Arm instal-lation.Check suitability for use on �re and smoke pro-tection doors.
54
43
16
223
67
Glass door shoe A164For mounting the door closer on the all-glass door leaf.
10max.
22 Door closers DC300
60
24 10083
4558
16,2
4724,5256 260
43
38
97,6
F
ASSA ABLOY DC300 · Rack and pinion closer with link arm L190 · Certi�ed in compliance with EN 1154, size 3-6 · Suitable for �re and smoke protection doors · For single action doors up to 1400 mm wide
Characteristics DC300 · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · Can be used for left and right-handed doors · Axis height-adjustable up to 14 mm · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 180° · Effective backcheck and latching speed range adjus-
table · Accessories for established installation types · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005
· Customised �nishes available on request
Characteristics for hold open link arm L191 · Hold-open angle adjustable up to 150° · Hold-open mode can be enabled and disabled as
required · Same installation as link arm · Cannot be used with �re and smoke protection
doors
Characteristics of special model DC300DA · Delayed closing adjustable from front · Other features as in Model DC300
10
8 6 1 13
4 41162-CPD-0485 EN 1154:1996+A1:2002
ASSA ABLOYSicherheitstechnik GmbHBildstockstraße 2072458 Albstadt
Dangerous substances: None
23 Door closers DC300
Variable adjustable closing force EN 3-6
Door width up to 1400 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Delayed closing (DC300DA) yes
Hold-open mode (with hold-open link arm L191) Adjustable 75°-150°, can be enabled and disabled
Weight 1.9 kg
Height 60 mm
Depth 47 mm
Length 260 mm
Certi�ed in compliance with EN 1154
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design- Ful�ls barrier-free building requirements- Same dimensions and design with and without mounting plate- Comprehensive functions, standard and optional
Builders - One drilling template overall- Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors, in both door and frame mounted applications
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Easier door opening and improved accessibility due to reapidly decreasing torque- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC300ASSA ABLOY Door Closer DC300 featuring rack and pinion technology in compliance with EN 1154 · Closing power adjustable, EN size 3-6, for doors up
to 1400 mm wide · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · CE approved · 14 mm height adjustable arm system for ease of
�tting · Suitable for left and right handed doors
Accessories: Link arm L190 Hold-open link arm
L191 Mounting plate A120 Angle bracket A123 Parallel arm bracket
for parallel arm moun-ting A154
Glass door shoe A165
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Customised �nish
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
24 Door closers DC300Dimensional drawings
66,5
97,5
366,5
Required space on doorsLeft handed shown in diagram. Right handed is the reverse
12max.
15
43
38
213,5
43
15
45
38
222
100
Installation dimensions for direct mountingLeft handed shown in diagram. Right handed is the reverse
142
222 45
160
42
16
65
Installation dimensions with mounting plateIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram. Right handed is the reverse
222 45
100
43
213,5
15 3
8
Frame mountingCloser on non-hinge side of door frameRight handed door shown in diagramLeft handed door is the reverse
16
42
142
160
65
222 45
Installation dimensions with mounting plate for frame mountingCloser on non-hinge side of door frame. For doors where direct mounting is not possible.Right handed door shown in diagramLeft handed door is the reverse
25 Door closers DC300Accessories
ISO 15065-57
6,5
16
33
,51
6
183
56
160
Mounting plate A120For mounting with dril-ling template acc. to EN 1154 Supplement 1 (�re and smoke protection doors) and for universal use
42
16
65
ISO 15065-5
260
40
5
5
65
18
30
1050
210250
29,5
Angle bracket A123For frame mounting in case of deep jamb, he-adroom reduced by 70 mm.Check suitability for use on �re and smoke pro-tection doors.
5
95
ISO 15065-5
44
810
58
64
954
25
Parallel arm bracket A154For Parallel Arm instal-lation.Check suitability for use on �re and smoke pro-tection doors.
54
43
16
Order placement information
Description Order no.
DC300, EN size 3-6, silver EV1
DC300, EN size 3-6, white, similar to RAL9016
DC300, EN size 3-6, brown, similar to RAL8014
DC300, EN size 3-6, black, similar to RAL9005
DC300, EN size 3-6, customised �nish
DC300DA, size 3-6, silver EV1
DC300DA, size 3-6, white, similar to RAL9016
DC300DA, size 3-6, brown, similar to RAL8014
DC300DA, size 3-6, black, similar to RAL9005
DC300DA, size 3-6, customised �nish
Link arm L190, silver EV1
Link arm L190, white, similar to RAL9016
Link arm L190, brown, similar to RAL8014
Link arm L190, black, similar to RAL9005
Link arm L190, customised �nish
Hold-open link arm L191, silver EV1
Hold-open link arm L191, white, similar to RAL9016
Description Order no.
Hold-open link arm L191, brown, similar to RAL8014
Hold-open link arm L191, black, similar to RAL9005
Hold-open link arm L191, customised �nish
Mounting plate A120, galvanised
Angle bracket A123, silver EV1
Angle bracket A123, white, similar to RAL9016
Angle bracket A123, brown, similar to RAL8014
Angle bracket A123, black, similar to RAL9005
Angle bracket A123, customised �nish
Parallel arm bracket A154, silver EV1
Parallel arm bracket A154, white, similar to RAL9016
Parallel arm bracket A154, brown, similar to RAL8014
Parallel arm bracket A154, black, similar to RAL9005
Parallel arm bracket A154, customised �nish
Glass door shoe A165, silver EV1
Cover A173, stainless steel
26 Door closers DC300DA with delayed action
60
24 10083
4558
16,2
4724,5256 260
43
38
97,6
F
ASSA ABLOY DC300DA · Rack and pinion closer with link arm L190 · Size 3-6 ·
Doors up to 1400 mm wide
Characteristics DC300DA · Can be used with integrated concealed mounting
plate · Can be used for left and right-handed doors · Link arm height-adjustable up to 14 mm · Adjustable door speed, latching speed and back-
check from front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 180° · With adjustable delayed action · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005
· Customised �nishes available on request
Characteristics for hold open link arm L191 · Hold-open angle adjustable up to 150° · Hold-open mode can be enabled and disabled as
required · Same installation as link arm · Cannot be used with �re and smoke protection
doors
Characteristics of special model DC300DA · Delayed closing adjustable from front · Other features as in Model DC300
10
8 6 1 13
4 41162-CPD-0485 EN 1154:1996+A1:2002
ASSA ABLOYSicherheitstechnik GmbHBildstockstraße 2072458 Albstadt
Dangerous substances: None
27 Door closers DC300DA with delayed action
Variable adjustable closing force EN 3-6
Door width up to 1400 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Delayed closing (DC300DA) yes
Weight 2.4 kg
Height 60 mm
Depth 47 mm
Length 260 mm
Architects & Speci�ers - Modern design- Compact design- Ful�ls barrier-free building requirements- Same dimensions and design with and without mounting plate- Comprehensive functions, standard and optional
Builders & Installers - One drilling template overall- Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors, in both door and frame mounted applications
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Easier door opening and improved accessibility due to reapidly decreasing torque- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC300ASSA ABLOY Door Closer DC300 featuring rack and pinion technology · Closing power adjustable, size 3-6, for doors up
to 1400 mm wide · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Supplied with integrated concealed mounting plate · Continuously adjustable delayed action · 14 mm height adjustable arm system for ease of
�tting · Suitable for left and right handed doors
Accessories: Link arm L190 Integrated mounting
plate A120 Angle bracket A123
Parallel arm bracket for parallel arm moun-ting A154
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Customised �nish
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
28 Door closers DC300DA with delayed actionDimensional drawings
66,5
97,5
366,5
Regular door mountingLeft handed shown in diagram. Right handed is the reverse
12max.
15
43
38
213,5
43
15
45
38
222
100
Installation dimensions for direct mountingLeft handed shown in diagram. Right handed is the reverse
142
222 45
160
42
16
65
Installation dimensions with mounting plateIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram. Right handed is the reverse
222 45
100
43
213,5
15 3
8
Frame mountingCloser on non-hinge side of door frameRight handed door shown in diagramLeft handed door is the reverse
16
42
142
160
65
222 45
Installation dimensions with mounting plate for frame mountingCloser on non-hinge side of door frame. For doors where direct mounting is not possible.Right handed door shown in diagramLeft handed door is the reverse
29 Door closers DC300DA with delayed actionAccessories
ISO 15065-57
6,5
16
33
,51
6
183
56
160
Mounting plate A120For mounting with dril-ling template acc. to EN 1154 Supplement 1 (�re and smoke protection doors) and for universal use
42
16
65
ISO 15065-5
260
40
5
5
65
18
30
1050
210250
29,5
Angle bracket A123For frame mounting in case of deep jamb, he-adroom reduced by 70 mm.Check suitability for use on �re and smoke pro-tection doors.
5
95
ISO 15065-5
44
810
58
64
954
25
Parallel arm bracket A154For Parallel Arm instal-lation.Check suitability for use on �re and smoke pro-tection doors.
54
43
16
Description Order no.
DC300, EN size 3-6, silver EV1
DC300, EN size 3-6, white, similar to RAL9016
DC300, EN size 3-6, brown, similar to RAL8014
DC300, EN size 3-6, black, similar to RAL9005
DC300, EN size 3-6, customised �nish
DC300DA, size 3-6, silver EV1
DC300DA, size 3-6, white, similar to RAL9016
DC300DA, size 3-6, brown, similar to RAL8014
DC300DA, size 3-6, black, similar to RAL9005
DC300DA, size 3-6, customised �nish
Link arm L190, silver EV1
Link arm L190, white, similar to RAL9016
Link arm L190, brown, similar to RAL8014
Link arm L190, black, similar to RAL9005
Link arm L190, customised �nish
Hold-open link arm L191, silver EV1
Hold-open link arm L191, white, similar to RAL9016
Description Order no.
Hold-open link arm L191, brown, similar to RAL8014
Hold-open link arm L191, black, similar to RAL9005
Hold-open link arm L191, customised �nish
Mounting plate A120, galvanised
Angle bracket A123, silver EV1
Angle bracket A123, white, similar to RAL9016
Angle bracket A123, brown, similar to RAL8014
Angle bracket A123, black, similar to RAL9005
Angle bracket A123, customised �nish
Parallel arm bracket A154, silver EV1
Parallel arm bracket A154, white, similar to RAL9016
Parallel arm bracket A154, brown, similar to RAL8014
Parallel arm bracket A154, black, similar to RAL9005
Parallel arm bracket A154, customised �nish
Glass door shoe A165, silver EV1
Cover A173, stainless steel
30 Door closers DC300 Tandem
24 10083
4558
16
,2
256 260
43
38
97
,6
12
5
29,5
52
16
2,6
5
ASSA ABLOY DC300 Tandem · Rack and pinion closer with link arm L190 · Two door closer are interlinked for extra wide and
heavy doors · Double closing torque of DC300, EN size >7 · For single action doors up to 1800 mm wide
Characteristics DC300 Tandem · Suitable for �re and smoke protection doors · Tandem mounting plate A121 generally required · Can only be used with a link arm · Can be used for left and right-handed doors · Axis height-adjustable up to 14 mm · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 180° · Effective backcheck and latching speed range adjus-
table · Large range of applications · Standard colours: silver EV1
31 Door closers DC300 Tandem
Variable adjustable closing force EN >7 (2 x DC300)
Door width up to 1800 mm
DIN door swing directions Left / right handed
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Hold-open mode e.g. for external holding magnet
Weight 4.8 kg
Height 125 mm
Depth 52 mm
Length 260 mm
Certi�ed in compliance with EN 1154 (DC300)
CE marking for building products yes (DC300)
Project planners - Extensive range of uses, also for extra large and heavy doors
Builders - One drilling template overall- Standard door closers DC300 can be used with tandem mounting plates- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors, in both door and frame mounted applications- Easily retro�tted with minimal rework
Trade - Reduced inventory costs due to modular product range
User - No reworking of door element for upgrade to tandem
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC300 TandemASSA ABLOY Door Closer DC300 Tandem with link arm · Closing power continuously adjustable, EN size >7,
for doors up to 1800 mm wide · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Can be used with mounting plate for �re and smoke
protection doors · 14 mm height adjustable arm system for ease of
�tting · Suitable for left and right handed doors
Consists of: · 2 pieces DC300 · 1 piece mounting pla-
tes A121 (One piece of accessory pack contains mounting plate A121, extra long spindle and screw pack)
· 1 piece link arm L190
Colour: · Silver EV1
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
32 Door closers DC300 TandemDimensional drawings
366,5
13
1,5
16
2,5
Required space on doorsLeft handed shown in diagramRight handed is the re-verse
17max.
15
43
38
52
5
213,5
43
15
45
38
222
100
Installation dimensions for direct mountingLeft handed shown in diagramRight handed is the re-verse
142
222 45
160
42
16
65
Installation dimensionsIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagramRight handed is the re-verse
33 Door closers DC300 TandemAccessories
ISO 15065-535 160
107 100
260
16
12
5
35
,5
8,5
43
Mounting plate A121For mounting with dril-ling template acc. to EN 1154 Supplement 1 (�re and smoke protection doors) and for direct mounting.
16
65
5
42
43
( )
15
( )
38
( )
Description Order no.
2 pieces DC300, EN size 3-6, silver EV1
1 piece Mounting plate A121, silver EV1
Tandem consists of (please order accordingly):
1 piece Link arm L190, silver EV1
127 Door closers
35 Door closers Guide rail door closers Design-focused and convenient
Cam door closers ®ASSA ABLOY Cam-Motion guide rail door closers
match the door�s appearance harmoniously and open a wide range of design possibilities to planners and architects.
Secure closing and optimum usage convenience are not incompatible thanks to the rapidly decreasing opening torque.
®Cam-Motion Technology reduces the counter pres -sure when opening the door and the door�s handling is made considerably easier in comparison with conven-tional guide rail door closers.
Product-speci�c requirements, as recommended in CEN TR15894 (rapidly decreasing opening torque), can
®already be met using ASSA ABLOY Cam-Motion .
®ASSA ABLOY Cam-Motion door closers impress thanks to their versatility and optimum convenience.
36 Door closers DC500
88,5 23,5 100270
485505
43
38
10
3
57
64
39( 32)
23(2
0,5
)
F
ASSA ABLOY DC500 · Door closer with Cam-Motion technology and
height-adjustable guide rail G195 or standard guide gail G193
· Ful�ls barrier-free building requirements (DDA/ CEN TR 15894)
· Certi�ed in compliance with EN 1154, size 1-4 · Suitable for �re and smoke protection doors · For single action doors up to 1100 mm wide · Can be used in four installation types: hinge and
non-hinge sides in standard and frame installation
Characteristics DC500 · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · Can be used for left and right-handed doors · Axis continuously height adjustable up to 14 mm · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 170° · Effective backcheck and latching speed range adjus-
table · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005, stainless steel
· Customised �nishes available on request
Characteristics for guide rail G195 · Height-adjustable by 2 mm for tolerance · Concealed fastening screws · Installation dimensions: see diagram
Characteristics of standard guide rail G193 · Without protective cover · Visible fastening screws · Installation dimensions: see diagram (dimensions in
brackets)
10
8 4 1 11
3 41162-CPD-0464 EN 1154:1996+A1:2002
Abloy OYPO Box 10880101 Joensuu,Finland
37 Door closers DC500
Variable adjustable closing force EN 1-4
Door width up to 1100 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Standard and frame installation yes
Closing speed Variable between 170°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Opening angle hinge side ca. 170°
Opening angle non-hinge side ca. 120°
Weight 2.7 kg
Height 64 mm
Depth 57 mm
Width 270 mm
Certi�ed in compliance with EN 1154
CE marking for building products yes
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design- Ful�ls barrier-free building requirements (DDA, CEN/TR 15894)- Same dimensions and design with and without mounting plate
Builders - One drilling template overall- Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors for standard and frame mounting on hinge and non-hinge side
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Easier door opening and improved accessibility due to reapidly decreasing torque
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC500ASSA ABLOY Door Closer DC500 with Cam-Motion technology and guide rail in compliance with EN 1154 · Closing power continuously adjustable, EN size 1-4,
for doors up to 1100 mm wide · Closing speed, latching speed and backcheck conti-
nuously adjustable · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · CE approved · 14 mm height adjustable arm system for ease of
�tting · Standard and frame mounting on hinge and non-
hinge side of the door · Suitable for left and right handed doors
Accessories: Standard guide rail
G193 Height-adjustable gui-
de rail G195 Mounting plate A120 Mounting plate A130
for guide rail G193 and G195
Angle bracket A104 for guide rail G193
Mechanical opening damper A153
Mechanical hold open device A152 (not for �re and smoke pro-tection doors)
Glass door shoe A166
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Stainless steel Customised �nish
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
38 Door closers DC500Dimensional drawings
371,5605
10
3
68
,5
Space required on doors for standard installation on hinge sideLeft handed shown in diagram. Right handed is the reverse
13max.
15
43
38
213,5
43
485110
100
15
38
Installation dimensions for direct standard mounting on hinge sideLeft handed shown in diagramRight handed is the re-verse
110 485
142 160
16
4265
Installation dimensions with mounting plate for standard mounting on hinge sideIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram. Right handed is the reverse
43
485110
100
11
38
213,5 Installation dimensions for direct frame moun-ting on hinge sideCloser on hinge side of door frame.Left handed shown in diagramRight handed is the re-verse
110 485
142 160
65
16
11
Installation dimensions with mounting plate for frame mounting on hinge sideCloser on hinge side of door frame. For doors where direct mounting is not possible.Left handed shown in diagram. Right handed is the reverse
39 Door closers DC500Dimensional drawings
110 485
100176,5
11
38
43
Installation dimensions for direct standard mounting non hinge sideRight handed door shown in diagramLeft handed door is the reverse
16
105 160
110 485
1165
Installation dimensions with mounting plate for standard mounting non hinge sideFor doors where direct mounting is not possibleRight handed door shown in diagramLeft handed door is the reverse
110 485
100
43
213,5
1538
Installation dimensions when mounted directly onto the frame non-hinge sideCloser on non-hinge side of door frameRight handed door shown in diagramLeft handed door is the reverse
16 42
142 160
65
110 485
Installation dimensions with mounting plate for frame mounting non-hinge sideCloser on non-hinge side of door frame. For doors where direct mounting is not possible.Right handed door shown in diagramLeft handed door is the reverse
40 Door closers DC500Accessories
ISO 15065-57
6,5
16
33
,51
6
183
56
160
Mounting plate A120For mounting with dril-ling template acc. to EN 1154 Supplement 1 and for universal use
42
16
65
10505485
713
30
Mounting plate A130For guide rail G193 and G195
42
16
52
713
65
( )
10 485505
242,5 242,5
15
23
9
Angle bracket A104Only for standard guide rail G193
65
8
15
23
81
16
R4
A
A
16020,8
210
6,5
33
,5 16
16
56
Replacement plate A124
Ø
Ø
6,5
90°
11
4
A-A
41 Door closers DC500Accessories
Hold open device A152Mechanical hold-open device for doors which sometimes need to be secured in the open position.Simple �tting into guide rail G193 and G195. Hold open angle max. 130°.Adjustable hold-open force.Not approved for use on �re and smoke protection doors.
Opening damper A153Helps to prevent the door and door handle from hitting a return wall.Simple �tting into guide rail G193 and G195. Opening damper continuously adjustable up to an opening angle of max. 130°. Does not replace a door stop.
Description Order no.
DC500, EN size 1-4, silver EV1
DC500, EN size 1-4, white, similar to RAL9016
DC500, EN size 1-4, brown, similar to RAL8014
DC500, EN size 1-4, black, similar to RAL9005
DC500, EN size 1-4, stainless steel
DC500, EN size 1-4, customised �nish
Guide rail G193, silver EV1
Guide rail G193, white, similar to RAL9016
Guide rail G193, brown, similar to RAL8014
Guide rail G193, black, similar to RAL9005
Guide rail G195, silver EV1
Guide rail G195, white, similar to RAL9016
Guide rail G195, brown, similar to RAL8014
Guide rail G195, black, similar to RAL9005
Guide rail G195, stainless steel
Description Order no.
Guide rail G195, bespoke �nish
Mounting plate A120, galvanised
Mounting plate A130, silver EV1
Mounting plate A130, white, similar to RAL9016
Mounting plate A130, brown, similar to RAL8014
Mounting plate A130, black, similar to RAL9005
Mounting plate A130, customised �nish
Glass door shoe A166, silver EV1
Angle bracket A104, silver EV1
Angle bracket A104, RAL9016 white
Angle bracket A104, brown, similar to RAL8014
Angle bracket A104, black, similar to RAL9005
Hold open device A152
Opening damper A153
42 Door closers DC700
88,5 23,5 100270
485505
43
38
10
3
57
64
39( 32)
23(2
0,5
)
F
ASSA ABLOY DC700 · Door closer with Cam-Motion technology and
height-adjustable guide rail G195 or standard guide gail G193
· Ful�ls barrier-free building requirements (DDA/ CEN TR 15894)
· Certi�ed in compliance with EN 1154, size 3-6 · Suitable for �re and smoke protection doors · For single action doors up to 1400 mm wide · Can be used in four installation types: hinge and
non-hinge sides in standard and frame installation
Characteristics DC700 · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · Can be used for left and right-handed doors · Axis continuously height adjustable up to 14 mm · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 170° · Effective backcheck and latching speed range adjus-
table · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005, stainless steel
· Customised �nishes available on request
Characteristics of special model DC700AC · Opening angle of 180° for standard installation on
hinge side (DC700AC) · Other features as in Model DC700
Characteristics for guide rail G195 · Height-adjustable by 2 mm for tolerance · Concealed fastening screws · Installation dimensions: see diagram
Characteristics of standard guide rail G193 · Without protective cover · Visible fastening screws · Installation dimensions: see diagram (dimensions in
brackets)
10
8 6 1 13
3 41162-CPD-0464 EN 1154:1996+A1:2002
Abloy OYPO Box 10880101 Joensuu,Finland
43 Door closers DC700
Variable adjustable closing force EN 3-6
Door width up to 1400 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Standard and frame installation yes
Closing speed Variable between 170°-0°
Latching speed Variable between 15°-0°
Backcheck Variable above 75°
Opening angle, hinge side, DC700 ca. 170°
Opening angle, hinge side, DC700AC 180°
Opening angle non-hinge side ca. 120°
Weight 2.7 kg
Height 64 mm
Depth 57 mm
Length 270 mm
Certi�ed in compliance with EN 1154
CE marking for building products yes
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design- Ful�ls barrier-free building requirements (DDA, CEN/TR 15894)- Same dimensions and design with and without mounting plate- Comprehensive functions, standard and optional
Builders - One drilling template overall- Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors for standard and frame mounting on hinge and non-hinge side
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Easier door opening and improved accessibility due to reapidly decreasing torque- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC700ASSA ABLOY Door Closer DC700 with Cam-Motion technology and guide rail in compliance with EN 1154 · Closing power adjustable, EN size 3-6, for doors up
to 1400 mm wide · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Can be used with integrated concealed mounting
plate, suitable for �re and smoke protection doors · CE approved · 14 mm height adjustable arm system for ease of
�tting · Standard and frame mounting on hinge and non-
hinge side of the door · Suitable for left and right handed doors
Accessories: Standard guide rail
G193 Height-adjustable gui-
de rail G195 Mounting plate A120 Mounting plate A130
for guide rail G193 and G195
Angle bracket A104 for guide rail G193
Mechanical opening damper A153
Mechanical hold open device A152 (not for �re and smoke pro-tection doors)
Glass door shoe A166
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Stainless steel Customised �nish
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
44 Door closers DC700Dimensional drawings
371,5605
10
3
68
,5
Space required on doors for standard installation on hinge sideLeft handed shown in diagramRight handed is the re-verse
13max.
15
43
38
213,5
43
485110
100
15
38
Installation dimensions for direct standard mounting on hinge sideLeft handed shown in diagramRight handed is the re-verse
110 485
142 160
16
4265
Installation dimensions with mounting plate for standard mounting on hinge sideIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram. Right handed is the reverse
43
485110
100
11
38
213,5 Installation dimensions for direct frame moun-ting on hinge sideCloser on hinge side of door frame.Left handed shown in diagram. Right handed is the reverse
110 485
142 160
65
16
11
Installation dimensions with mounting plate for frame mounting on hinge sideCloser on hinge side of door frame. For doors where direct mounting is not possible.Left handed shown in diagram. Right handed is the reverse
45 Door closers DC700Dimensional drawings
110 485
100176,5
11
38
43
Installation dimensions for direct standard mounting non hinge sideRight handed door shown in diagramLeft handed door is the reverse
16
105 160
110 485
1165
Installation dimensions with mounting plate for standard mounting non hinge sideFor doors where direct mounting is not possibleRight handed door shown in diagramLeft handed door is the reverse
110 485
100
43
213,5
1538
Installation dimensions when mounted directly onto the frame non-hinge sideCloser on non-hinge side of door frameRight handed door shown in diagramLeft handed door is the reverse
16 42
142 160
65
110 485
Installation dimensions with mounting plate for frame mounting non-hinge sideCloser on non-hinge side of door frame. For doors where direct mounting is not possible.Right handed door shown in diagramLeft handed door is the reverse
46 Door closers DC700Accessories
ISO 15065-57
6,5
16
33
,51
6
183
56
160
Mounting plate A120For mounting with dril-ling template acc. to EN 1154 Supplement 1 and for universal use
42
16
65
10505485
713
30
Mounting plate A130For guide rail G193 and G195
42
16
52
713
65
( )
10 485505
242,5 242,5
15
23
9
Angle bracket A104Only for standard guide rail G193
65
8
15
23
81
16
R4
A
A
16020,8
210
6,5
33
,5 16
16
56
Replacement plate A124
Ø
Ø
6,5
90°
11
4
A-A
47 Door closers DC700Accessories
Hold open device A152Mechanical hold-open device for doors which sometimes need to be secured in the open position.Simple �tting into guide rail G193 and G195. Hold open angle max. 130°.Adjustable hold-open force.Not approved for use on �re and smoke protection doors.
Opening damper A153Helps to prevent the door and door handle from hitting a return wall.Simple �tting into guide rail G193 and G195. Opening damper continuously adjustable up to an opening angle of max. 130°. Does not replace a door stop.
Description Order no.
DC700, EN size 3-6, silver EV1
DC700, EN size 3-6, white, similar to RAL9016
DC700, EN size 3-6, brown, similar to RAL8014
DC700, EN size 3-6, black, similar to RAL9005
DC700, EN size 3-6, stainless steel
DC700, EN size 3-6, customised �nish
DC700AC, EN size 3-6, silver EV1
DC700AC, EN size 3-6, white, similar to RAL9016
Guide rail G193, silver EV1
Guide rail G193, white, similar to RAL9016
Guide rail G193, brown, similar to RAL8014
Guide rail G193, black, similar to RAL9005
Guide rail G195, silver EV1
Guide rail G195, white, similar to RAL9016
Guide rail G195, brown, similar to RAL8014
Guide rail G195, black, similar to RAL9005
Description Order no.
Guide rail G195, stainless steel
Guide rail G195, bespoke �nish
Mounting plate A120, galvanised
Mounting plate A130, silver EV1
Mounting plate A130, white, similar to RAL9016
Mounting plate A130, brown, similar to RAL8014
Mounting plate A130, black, similar to RAL9005
Mounting plate A130, customised �nish
Glass door shoe A166, silver EV1
Angle bracket A104, silver EV1
Angle bracket A104, RAL9016 white
Angle bracket A104, brown, similar to RAL8014
Angle bracket A104, black, similar to RAL9005
Hold open device A152
Opening damper A153
48 Door closers DC640 with free swing function
200
142 160
400
485518
25
68
110
63
71
33
23
F
ASSA ABLOY DC640 · Rack and pinion door closer with free-swing function · Certi�ed in compliance with EN 1155 · Suitable for �re and smoke protection doors · Door width up to 1400 mm with link arm free-swing
L690 and up to 1100 mm with guide rail free-swing G694
Characteristics DC640 with free swing function · Electro-hydraulic door closer · Supplied with integrated concealed mounting plate,
suitable for �re and smoke protection doors · Can be used for left and right-handed doors · Arm system height-adjustable up to 14 mm · Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves · Thermodynamic valves for consistent performance · Variable adjustable closing force · Opening angle up to 180° · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005
· Customised �nishes available on request
Characteristics of link arm free swing L690 · Free-swing angle adjustable up to 180° · Closing force size EN 3-6 · Doors up to 1400 mm wide
Characteristics of guide rail free swing G694 · Free-swing angle adjustable up to 180° · Closing force EN 3 - 4 · Doors up to 1100 mm wide
07
8 4 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1155:1997+A1:2002
49 Door closers DC640 with free swing function
Door width up to 1100 mm / 1400 mm
Closing speed Variable between 180°-0°
Latching speed Variable between 15°-0°
Weight 4.0 kg
Height 71 mm
Depth 63 mm
Length 400 mm
Certi�ed in compliance with EN 1155
CE marking for building products yes
Backcheck Variable above 75°
Continuously adjustable closing force with guide rail free swing / link arm free swing
EN 3-4 / EN 3-6
Fire and smoke protection yes
DIN door swing directions Left / right handed
Project planners - Free-swing function- CE certi�ed with link arm and guide rail- Modern design- Standard functions built-in- Ful�ls barrier-free building requirements
Builders - Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors, in both door and frame mounted applications
Trade - One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - After �rst opening door could be opened without any opening resistance- Largely unaffected by temperature �uctuations thanks to thermodynamic valves- Free-swing function
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC640ASSA ABLOY Door Closer DC640 featuring free swing technology in compliance with EN 1155 · With link arm free swing L690 closing power conti-
nuously adjustable, EN size 3-6, for doors up to 1400 mm wide
· With guide rail free swing G694 closing power conti-nuously adjustable, EN size 3-4, for doors up to 1100 mm wide
· Closing speed, latching speed and backcheck adjus-table via front facing regulating valves
· Supplied with integrated concealed mounting plate, suitable for �re and smoke protection doors
· CE approved · 14 mm height adjustable arm system for ease of
�tting · Suitable for left and right handed doors
Accessories: Link arm free swing
L690 Guide rail free swing
G694 Connection box A140
for door leaf installa-tions
Mounting plate A130 for guide rail G694
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Customised �nish
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
50 Door closers DC640 with free swing functionDimensional drawings
420624
110
75
Required space on doorsLeft handed shown in diagram. Right handed is the reverse
42
68
16
max. 15
127 485
142 160
16
4268
Installation dimensions for standard mounting on hinge side with guide railLeft handed shown in diagram. Right handed is the reverse
16 42
142 160
68
127 485
Installation dimension for standard mounting on non-hinge side with guide railCloser on non-hinge side of door frameLeft handed shown in diagram. Right handed is the reverse
16
11
128 160
68
127 485
Installation dimension for standard mounting on hinge side frame moun-ting with guide railCloser on hinge side of door frame.Left handed shown in diagram. Right handed is the reverse
51 Door closers
142
247 45
160
42
16
65
Installation dimension for standard in mounting stallations on hinge side with link armLeft handed shown in diagram. Right handed is the reverse
DC640 with free swing functionDimensional drawings
16
42
142 160
65
247 45
Installation dimension for standard mounting on non-hinge side with link armCloser on non-hinge side of door frameLeft handed shown in diagram. Right handed is the reverse
10505485
713
30
Mounting plate A130For guide rail G694
Description Order no.
DC640 EN size 3 � 6 / EN size 3 - 4, brown, similar to RAL 8014
DC640 EN size 3 � 6 / EN size 3 - 4, black, similar to RAL 9005
DC640 EN size 3 � 6 / EN size 3 - 4, white, similar to RAL 9016
DC640 EN size 3 � 6 / EN size 3 - 4, silver EV1
DC640 EN size 3 � 6 / EN size 3 - 4, customised �nish
Link arm free swing L690, silver EV1
Link arm free swing L690, white, similar to RAL 9016
Link arm free swing L690, brown, similar to RAL 8014
Link arm free swing L690, black, similar to RAL9005
Link arm free swing L690, customised �nish
Guide rail free swing G694, silver EV1
Guide rail free swing G694, white, similar to RAL9016
Guide rail free swing G694, brown, similar to RAL8014
Description Order no.
Guide rail free swing G694, black, similar to RAL9005
Guide rail free swing L694, customised �nish
Angle bracket A104, silver EV1
Angle bracket A104, RAL9016 white
Angle bracket A104, brown, similar to RAL8014
Angle bracket A104, black, similar to RAL9005
Mounting plate A130, silver EV1
Mounting plate A130, white, similar to RAL9016
Mounting plate A130, brown, similar to RAL8014
Mounting plate A130, black, similar to RAL9005
Mounting plate A130, customised �nish
Connection box A140
Mounting plate A115, silver EV1
Mounting plate A115, customised �nish
52 Door closers FD460-DC700
88,5 23,5 100270
505545
43
38
110
57
64
33
31
F
ASSA ABLOY G460 · Door closer with Cam-Motion technology and guide
rail with electro-mechanical hold open device for single leaf doors
· Certi�ed in complience with EN1155, size 3-6 · Hold open angle continuously adjustable between
70°-130° · For �re and smoke protection doors up to 1400 mm
Characteristics G460 · Electro-mechanical hold open device · Continuously adjustable hold open force · Hold open angle adjustable between 70°-130° · Door opening angle up to 130° · Can be used for left and right handed doors · Standard mounting position on hinge side and non-
hinge side · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar to RAL9005
· Customised �nishes available on request10
8 6 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1155:1997+A1:2002
53 Door closers
Door width up to 1400 mm
Weight 1.2 kg
Height 31 mm
Depth 33 mm
Length 545 mm
Certi�ed in compliance with EN 1155
CE marking for building products yes
Hold open angle 70° - 130°
Power supply 24 V DC
Max. consumption 60 mA
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design
Builders - Adjustable to nearly any door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors for standard mounting on hinge and non hinge side
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions
User - Adjustable operating force, to meet door construction reguirements and user need
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cation for DC700 with G460ASSA ABLOY door closer DC700 with Cam-Motion technology, guide rail G460 with electro-mechanical hold-open device, 24 V DC · Power supply 24 V DC · Hold open force continuously adjustable, EN size
3 � 6 · Hold open angle adjustable between 70°-130° · Can be used for left and right handed doors · Standard mounting position on hinge side and non-
hinge side · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · With technical approval for different smoke detec-
tion systems
Accessories: Mounting plate A115 Angle bracket A116 Power supply Smoke protection
detector Flush mounted or sur-
face mounted release button
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Customised �nish
Guide rail G460
Facts for door closer see DC700
FD460-DC700
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
54 Door closers
Dimensional drawings
371,51250 - 2800
110
68
,5
371,5
Regular mounting on hinge sideLeft handed shown in diagramRight handed is the re-verse
15
38
43
max. 18
90 505
142 160
16
4265
Installation dimensions with mounting plate for standard mounting on hinge sideIn compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram. Right handed is the reverse
16
105 160
110 505
1065
Installation dimensions with mounting plate for standard mounting on non-hinge sideFor doors where direct mounting is not possibleRight handed door shown in diagramLeft handed door is the reserve
FD460-DC700
55 Door closers
Dimensional drawings
5 505515
30
15
7
485 Mounting plate A115For guide rail G460
42
16
52
71
5
65
( )
26,5 505548
194 170
15
25
7
10
Angle bracket A116For guide rail G460 non-hinge side mounting.
65
8
15
23
92
16
Description Order no.
Guide rail G460 with electro-mechanical hold open device, brown, similar to RAL8014
Guide rail G460 with electro-mechanical hold open device, black, similar to RAL 9005
Guide rail G460 with electro-mechanical hold open device, white, similar to RAL9016
Guide rail G460 with electro-mechanical hold open device, silver EV1
Guide rail G460 with electro-mechanical hold open device, customised �nish
Description Order no.
Mounting plate A115, silver EV1
Mounting plate A115, customised �nish
Angle bracket A116, silver EV1
Angle bracket A116, customised �nish
FD460-DC700
56 Door closers FD461-DC700
88,5 23,5 100270
5051100 - 2660
43
38
110
57
64
33
31 505
F
ASSA ABLOY DC700 with G461 · Door closer with Cam-Motion technolygy and guide rail · Certi�ed in complience with EN 1158, size 3-6 · Operates independently of door closers and offers
best possible safety and reliability · For �re and smoke protection double leaf doors,
hinge distance 1250 - 2800 mm
Characteristics DC700 with G461 · Integrated mechanical co-ordinator for double leaf
doors · Correct closing sequence guaranteed for double leaf
doors, inactive leaf closes before active leaf start to close
· Active leaf could stay open in any selected angle up to 150° when inactive leaf is opened
· Standard mounting position on hinge side and non-hinge side
· Non-hinge side mounting requires hook arm G120 · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · Standard colours: silver, white similar to RAL9016,
brown similar to RAL8014, black similar to RAL9005 · Customised �nishes available on request
10
8 6 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1158:1997+A1:2002
57 Door closers
Weight 2.6 kg
Height 31 mm
Depth 33 mm
Length Depends on hinge distance
Certi�ed in compliance with EN 1158
CE marking for building products Yes
Hinge distance 1250 - 2800 mm
Max. opening angle of active leaf (hinge side / non-hinge side) 150° / 120°
Max. opening angle of inactive leaf (hinge side / non-hinge side) 170° / 120°
Fire and smoke protection Yes
Project planners - Modern design- Compact design
Builders - Adjustable to nearly any door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for hinge and non-hinge side installations
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions
User - Correct closing sequence guaranteed in every situation
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cation for DC700 with G461ASSA ABLOY guide rail with mechanical co-ordinator for double leaf doors used with DC700 Cam-Motion door closers · Hinge distance 1250 - 2800 mm · Active leaf could stay open in any selected angle up
to 150° when inactive leaf is opened · Standard mounting position on hinge side and non-
hinge side · Non-hinge side mounting requires hook arm G120 · Axis continuoulsy height adjustable up to 14 mm · Large range of applications
Accessories: Mounting plate A115 Angle bracket A116 Angle bracket A117 Hook arm G120
fornon-hinge side ins-tallations
Carry bar
Colour: Silver EV1 White, similar to
RAL9016 Brown, similar to
RAL8014 Black, similar to
RAL9005 Customised �nish
Guide rail G461
Facts for door closer see DC700
FD461-DC700
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
58 Door closers
Dimensional drawings
371,51250 - 2800
110
68
,5
371,5
Regular mounting on hinge sideRight handed door is active leafLeft handed door is inactive leaf
90505
142160
16
42 65
90 505
142 160
16
4265
Installation dimensions with mounting plate for standard mounting on hinge sideRight handed door is active leafLeft handed door is inactive leaf
334,51400 - 2800
110
81
,5
371,5
Regular mounting on non-hinge sideRight handed door is active leafLeft handed door is inactive leaf
16
105 160
110 505
1065
16
142160
110505
10 65
Installation dimensions with mounting plate for standard mounting on hinge sideRight handed door is active leafLeft handed door is inactive leaf
FD461-DC700
59 Door closers
Dimensional drawings
5 505515
30
15
7
485 Mounting plate A115For guide rail G461
26,5 505548
194 170
15
25
7
10
Angle bracket A116For guide rail G461 non-hinge side mounting
1250
15
2535
Angle bracket A117Middle bracket for guide rail G461 non-hinge side mounting
Hook arm G120For double leaf doors non-hinge side mounting
Description Order no.
Guide rail G461 with mechanical co-ordinator, brown, similar to RAL8014
Guide rail G461 with mechanical co-ordinator, black, similar to RAL 9005
Guide rail G461 with mechanical co-ordinator, white, similar to RAL9016
Guide rail G461 with mechanical co-ordinator, silver EV1
Guide rail G461 with mechanical co-ordinator, customised �nish
Mounting plate A115, silver EV1
Mounting plate A115, customised �nish
Description Order no.
Angle bracket A116, silver EV1
Angle bracket A116, customised �nish
Angle bracket A117, silver EV1
Angle bracket A117, customised �nish
Hook arm G120, brown, similar to RAL8014
Hook arm G120, black, similar to RAL 9005
Hook arm G120, white, similar to RAL9016
Hook arm G120, silver EV1
Hook arm G120, customised �nish
FD461-DC700
60 Door closers FD462-DC700
88,5 23,5 100270
5051100 - 2660
43
38
110
57
64
33
31 505
F
ASSA ABLOY G462 · Door closer with Cam-Motion technology and guide
rail with integrated mechanical co-ordinator and two electro-mechanical hold open devices for dou-ble leaf doors
· Certi�ed in complience with EN 1155 and EN 1158, size 3-6
· Operates independently of door closers and offers best possible functions, safety and reliability
· For �re and smoke protection double leaf doors, hinge distance 1250 - 2800 mm
Characteristics G462 · Hold open angle of inactive door leaf adjustable bet-
ween 70° - 130° · Continuously adjustable hold open force · Correct closing sequence guaranteed for double leaf
doors, inactive leaf closes before active leaf start to close
· Standard mounting position on hinge side and non-hinge side
· Non-hinge side mounting requires hook arm G120 · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · Standard colours: silver, white similar to RAL9016,
brown similar to RAL8014, black similar to RAL9005 · Customised �nishes available on request · Integrated mechanical co-ordinator with two elect-
ro-mechanical hold open devices · Possible to keep active leaf or both door leaves open10
8 6 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1155:1997+A1:2002
10
8 6 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1158:1997+A1:2002
10
8 6 1 13
3 41162-CPD-0464 EN 1154:1996+A1:2002
Abloy OYPO Box 10880101 Joensuu,Finland
61 Door closers
Weight 3.1 kg (G462)
Height 31 mm
Depth 33 mm
Length Depends on hinge distance
CE marking for building products Yes
Power supply 24 V DC
Hinge distance 1250 - 2800 mm
Max. opening angle of active leaf (hinge side / non-hinge side) 120°
Current consumption 120 mA (G462)
Fire and smoke protection Yes
Hold open angle of inactive leaf (hinge side / non-hinge side) 70° - 120°
Certi�ed in compliance with EN 1155 and EN 1158
Project planners - Extensive range of uses: Fire and smoke protection doors- Modern design- Compact design- Applications where both door leaves need to keep open
Builders - Adjustable to nearly any door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for hinge and non-hinge side installations
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions
User - Correct closing sequence guaranteed in every situation- Adjustable operating force, to meet door construction reguirements and user need
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cation for G462ASSA ABLOY guide rail with mechanical co-ordinator and electro-mechanical hold-open device for double leaf doors used with DC700 Cam-Motion door closers · Hinge distance 1250 - 2800 mm · Hold open angle of inactive leaf adjustable between
70° - 130° · Continuously adjustable hold open force · Correct closing sequence guaranteed for double leaf
doors, inactive leaf closes before active leaf start to close
· Standard mounting position on hinge side and non-hinge side
· Non-hinge side mounting requires hook arm G120 · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · Possible to keep active leaf or both door leaves open
(G462)
Accessories: Mounting plate A115 Angle bracket A116 Angle bracket A117 Hook arm G120 for
non-hinge side moun-ting
Carry bar Power supply Smoke protection
detector Flush mounted or sur-
face mounted release button
Colour:Silver EV1White, similar to RAL9016Brown, similar to RAL8014Black, similar to RAL9005Customised �nish
Guide rail G462
Facts for door closer see DC700
FD462-DC700
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
62 Door closers
Dimensional drawings
371,51250 - 2800
110
68,5
371,5
Regular mounting on hinge sideLeft handed shown in diagramRight handed is the re-verse
90505
142160
16
42 65
90 505
142 160
16
4265
Installation dimensions with mounting plate for standard mounting on hinge sideRight handed door is ac-tive leafLeft handed door is inac-tive leaf
334,51400 - 2800
110
81
,5
371,5
Regular mounting on non-hinge sideRight handed door is ac-tive leafLeft handed door is inac-tive leaf
16
105 160
110 505
1065
16
142160
110505
10 65
Installation dimensions with mounting plate for standard mounting on hinge sideRight handed door is ac-tive leafLeft handed door is inac-tive leaf
FD462-DC700
63 Door closers FD462-DC700Dimensional drawings
5 505515
30
15
7
485 Mounting plate A115For guide rail G464
26,5 505548
194 170
15
25
7
10
Angle bracket A116For guide rail G464 non-hinge side mounting
1250
15
2535
Angle bracket A117Middle bracket for guide rail G464 non-hinge side mounting
Hook arm G120For double leaf doors non-hinge side mounting
42
16
52
715
65
( )
65
8
15
23
92
16
Description Order no.
Guide rail G462 with mechanical co-ordinator and two electro-mechanical hold open devices, silver
Guide rail G462 with mechanical co-ordinator and two electro-mechanical hold open devices, white, similar to RAL9016
Guide rail G462 with mechanical co-ordinator and two electro-mechanical hold open devices, brown, similar to RAL8014
Guide rail G462 with mechanical co-ordinator and two electro-mechanical hold open devices, black, similar to RAL 9005
Guide rail G462 with mechanical co-ordinator and two electro-mechanical hold open devices, customized �nish
Description Order no.
Mounting plate A115, silver
Mounting plate A115, customized �nish
Angle bracket A116, silver
Angle bracket A116, customized �nish
Angle bracket A117, silver
Angle bracket A117, customized �nish
Hook arm G120, silver
Hook arm G120, white, similar to RAL9016
Hook arm G120, brown, similar to RAL8014
Hook arm G120, black, similar to RAL 9005
Hook arm G120, customized �nish
64 Door closers FD464-DC700
88,5 23,5 100270
5051100 - 2660
43
38
110
57
64
33
31 505
F
ASSA ABLOY G464 · Door closer with Cam-Motion technology and guide
rail with integrated mechanical co-ordinator and two electro-mechanical hold open devices for dou-ble leaf doors
· Certi�ed in complience with EN 1155 and EN 1158, size 3-6
· Operates independently of door closers and offers best possible functions, safety and reliability
· For �re and smoke protection double leaf doors, hinge distance 1250 - 2800 mm
Characteristics G464 · Hold open angle of inactive door leaf adjustable bet-
ween 70° - 130° · Continuously adjustable hold open force · Correct closing sequence guaranteed for double leaf
doors, inactive leaf closes before active leaf start to close
· Standard mounting position on hinge side and non-hinge side
· Non-hinge side mounting requires hook arm G120 · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · Standard colours: silver, white similar to RAL9016,
brown similar to RAL8014, black similar to RAL9005 · Customised �nishes available on request · Integrated mechanical co-ordinator with one elect-
ro-mechanical hold open device · Possible to keep both door leaves open10
8 6 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1155:1997+A1:2002
10
8 6 1 13
3 3
Abloy OyPO Box 10880101 Joensu
EN1158:1997+A1:2002
10
8 6 1 13
3 41162-CPD-0464 EN 1154:1996+A1:2002
Abloy OYPO Box 10880101 Joensuu,Finland
65 Door closers
Weight 2.9 kg (G464); 3.1 kg (G462)
Height 31 mm
Depth 33 mm
Length Depends on hinge distance
CE marking for building products Yes
Power supply 24 V DC
Hinge distance 1250 - 2800 mm
Max. opening angle of active leaf (hinge side / non-hinge side) 150° / 120°
Current consumption 60 mA (G464); 120 mA (G462)
Fire and smoke protection Yes
Hold open angle of inactive leaf (hinge side / non-hinge side) 70° - 130° / 70° - 120°
Certi�ed in compliance with EN 1155 and EN 1158
Project planners - Extensive range of uses: Fire and smoke protection doors- Modern design- Compact design- Applications where both door leaves need to keep open
Builders - Adjustable to nearly any door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for hinge and non-hinge side installations
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions
User - Correct closing sequence guaranteed in every situation- Adjustable operating force, to meet door construction reguirements and user need
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cation for G464ASSA ABLOY guide rail with mechanical co-ordinator and electro-mechanical hold-open device for double leaf doors used with DC700 Cam-Motion door closers · Hinge distance 1250 - 2800 mm · Hold open angle of inactive leaf adjustable between
70° - 130° · Continuously adjustable hold open force · Correct closing sequence guaranteed for double leaf
doors, inactive leaf closes before active leaf start to close
· Standard mounting position on hinge side and non-hinge side
· Non-hinge side mounting requires hook arm G120 · Axis continuoulsy height adjustable up to 14 mm · Large range of applications · Possible to keep active leaf or both door leaves open
(G462) · Possible to keep both door leaves open (G464)
Accessories: Mounting plate A115 Angle bracket A116 Angle bracket A117 Hook arm G120 for
non-hinge side moun-ting
Carry bar Power supply Smoke protection
detector Flush mounted or sur-
face mounted release button
Colour:Silver EV1White, similar to RAL9016Brown, similar to RAL8014Black, similar to RAL9005Customised �nish
Facts for door closer see DC700
FD464-DC700
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
66 Door closers
Dimensional drawings
371,51250 - 2800
110
68,5
371,5
Regular mounting on hinge sideLeft handed shown in diagramRight handed is the re-verse
90505
142160
16
42 65
90 505
142 160
16
4265
Installation dimensions with mounting plate for standard mounting on hinge sideRight handed door is ac-tive leafLeft handed door is inac-tive leaf
334,51400 - 2800
110
81
,5
371,5
Regular mounting on non-hinge sideRight handed door is ac-tive leafLeft handed door is inac-tive leaf
16
105 160
110 505
1065
16
142160
110505
10 65
Installation dimensions with mounting plate for standard mounting on hinge sideRight handed door is ac-tive leafLeft handed door is inac-tive leaf
FD464-DC700
67 Door closers
Dimensional drawings
5 505515
30
15
7
485 Mounting plate A115For guide rail G464
26,5 505548
194 170
15
25
7
10
Angle bracket A116For guide rail G464 non-hinge side mounting
1250
15
2535
Angle bracket A117Middle bracket for guide rail G464 non-hinge side mounting
Hook arm G120For double leaf doors non-hinge side mounting
FD464-DC700
42
16
52
71
5
65
( )
65
8
15
23
92
16
Description Order no.
Guide rail G464 with mechanical co-ordinator and electro-mechanical hold open device, silver
Guide rail G464 with mechanical co-ordinator and electro-mechanical hold open device, white, similar to RAL9016
Guide rail G464 with mechanical co-ordinator and electro-mechanical hold open device, brown, similar to RAL8014
Guide rail G464 with mechanical co-ordinator and electro-mechanical hold open device, black, similar to RAL 9005
Guide rail G461 with mechanical co-ordinator and electro-mechanical hold open device, customized �nish
Description Order no.
Mounting plate A115, silver
Mounting plate A115, customized �nish
Angle bracket A116, silver
Angle bracket A116, customized �nish
Angle bracket A117, silver
Angle bracket A117, customized �nish
Hook arm G120, silver
Hook arm G120, white, similar to RAL9016
Hook arm G120, brown, similar to RAL8014
Hook arm G120, black, similar to RAL 9005
Hook arm G120, customized �nish
94 Door closers
69 Door closers DC420
47
5
82
306
54-64
36-4
636-4
6 108
322
F
ASSA ABLOY DC420 · Floor spring with �xed closing force for thin slabs · Certi�ed in compliance with EN 1154, size 2/3/4 · Suitable for �re and smoke protection doors · For double and single action door up to 100kg
Characteristics DC420 · One Body size in three �xed force sizes EN2-EN3-EN4 · Hydraulic control over 175° in both door swing
directions · Adjustable door speed and latching speed from top
regulating valves · Back check effect · Cast iron body · Cement box in hot zinc plated · Interchangeable spindle from 0 to +30mm · Available with hold-opening angle 90°, 105° and
without hold open
04
3 8 1 1 4EN 1154:1996+A1:20020425 DO.0524
ASSA ABLOY Italia S.p.A. a Bovaresa, 13Vi
40017 San Giovanni in PersicetoBologna - Italy
3
04
3 8 1 1 4EN 1154:1996+A1:20020425 DO.0525
ASSA ABLOY Italia S.p.A. a Bovaresa, 13Vi
40017 San Giovanni in PersicetoBologna - Italy
4
70 Door closers DC420
Door width up to 1100 mm
Closing speed Variable between 175°- 0°
Latching speed Variable between 15°- 0°
Weight 3.7 kg
Height 82 mm
Length 302 mm
CE marking for building products Yes
Width 47 mm
DIN direction Left / Right handed doors or double action
Variable adjustable closing force EN2/EN3/EN4
Fire and smoke protection Yes
Hold-open mode 90°/105°/Non Hold Open
Certi�ed in compliance with EN 1154
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Particularly suitable in case of double action glass doors- Recommended for thin door leafs- Hold open at 90°,105° and non hold open- Variety of available spindles: square Italian, rectangular German- Architectural �nishes: coverplate in polished stainless steel, satin stainless steel, polished brass
Builders - Universal for left/right handed and double action doors- Large range of adjustment within cement box to solve possible alignment problems on the site without taking down the door
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Easier door opening and improved accessibility due to reapidly decreasing torque- Backcheck feature offers optimum protection for doors and walls
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC420ASSA ABLOY Floor spring DC420 featuring Cam-Moti-on technology in compliance with EN 1154 · Closing power , EN sizes 2/3/4, for doors up to 1100
mm wide · Closing speed, latch speed adjustable from top regu-
lating valves · CE approved · 6 mm height adjustable within cement box · Suitable for Left/Right handed and double leaf doors
AC384 - Top pivot for left or right doors
AC612- Sealing Compound for �oor springs
AC307 - Cover plate
Colour: Polished stainless
steel Satin stainless steel Polished brass
Accessories: AC115 - Reversible
Bottom Arm Italian spindle
AC393 - Reversible Bottom Arm German Spindle
AC8 - Double action Top Pivot
AC583 - Right and left bottom arm. Square Italian spindle
AC392 - Right & Left bottom Arm German Spindle
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
71 Door closers DC420Dimensional drawings
47
10,5
5,5
1
1
36-4
636
-46
82 108
306
54-64
322
4
Double action door mounting.
36
36
36
36
Right-handed door mounting.
3636
36
36
Left-handed door moun-ting.
72 Door closers DC420Dimensional drawings
108
322 2
AC307Available in satin stainless steel, polished stainless steel and polished brass.
753523
33 120
21
201
0
28
AC115Reversible bottom arm in steel for double action doors.
2124
10
5454
15335
27
62
AC393Reversible bottom arm in steel for double action doors.
22
Ø14
10 90 10
132
40
25 6620
27
AC8Double action top pivot.
73 Door closers DC420Dimensional drawings
200
50
34
36 56
20
46 46 46
18 10
3°
AC583Right and left bottom arm in steel for single ac-tion doors, 36 mm. offset. Square Italian spindle. Sil-ver painted ABS covers.
18
20
5636
34
50 46 46
200
46
3°
10
AC392Right and left bottom arm in steel for single ac-tion doors, 36 mm offset.Rectangular German socket.Silver painted ABS covers.
20
20,5
20,5
6,5
6,5
200
464650
34
3656
46
AC384Double action top pivot in full steel 36 mm offset.Silver painted ABS covers.
1-2
mm
AC612Sealing Compound for �oor springs.
74 Door closers
Floo
r spr
ings
DC420Dimensional drawings
AC 340
AC 360
AC 341
AC 361
AC 342
AC 362
AC 343
AC 363
AC 344
AC 364
AC 345
AC 365
AC 346
AC 366
IT
DE
50 10
15 20 25 30
Detachable spindles
Description Order no.
DC423.2 size 3 without H.O.
DC424.0 size 4 with H.O. 105°
DC424.2 size 4 without H.O.
AC307 Cover plate polished brass
DC424.5 size 4 with H.O. 90°
DC423.5 size 3 with H.O. 90°
DC422.2 size 2 without H.O.
DC422.5 size 2 with H.O. 90°
AC307 Cover plate polished stainless steel
DC422.0 size 2 with H.O. 105°
DC423.0 size 3 with H.O. 105°
AC307 Cover plate satin stainless steel
Detachable Italian Spindle h = 0 mm - zinc plated
Detachable Italian Spindle h = 5 mm - zinc plated
Detachable Italian Spindle h = 10 mm - zinc plated
Detachable Italian Spindle h = 15 mm - zinc plated
Detachable Italian Spindle h = 20 mm - zinc plated
Detachable Italian Spindle h = 25 mm - zinc plated
Detachable Italian Spindle h = 30 mm - zinc plated
Detachable German Spindle h = 0 mm - zinc plated
Detachable German Spindle h = 5 mm - zinc plated
Detachable German Spindle h = 10 mm - zinc plated
Detachable German Spindle h = 15 mm - zinc plated
Description Order no.
Detachable German Spindle h = 20 mm - zinc plated
Detachable German Spindle h = 25 mm - zinc plated
Detachable German Spindle h = 30 mm - zinc plated
Right Bottom arm for single action doors, French Square spindle
Right Bottom arm for single action doors, French Square spindle
Left Bottom arm for single action doors, French Square spindle
Left Bottom arm for single action doors, French Square spindle
Double Action Top Pivot Silver.
Double Action Top Pivot Black.
Right & Left bottom arm. Rectangular German Socket Silver.
Right & Left bottom arm. Rectangular German Socket Black.
Spindle Steel
Right & Left bottom arm. Square Italian Spindle Silver.
Right & Left bottom arm. Square Italian Spindle Black.
Sealing Compound for �oorsprings.
75 Door closers DC475
104
365
36-4
263-
4282
55 241 78
345
57-62
2
F
ASSA ABLOY DC475 · Floor spring with adjustable closing force for large
and very heavy doors. · Certi�ed in compliance with EN 1154, size 3-6, cycle
test over 1,000,000 cycles · Suitable for �re and smoke protection doors · For double and single action door up to 300 kg
Characteristics DC475 · Closing from 175° in both door swing directions
with hydraulic control from 150°. · Two thermodynamic valves for consistent perfor-
mance. · Adjustable door speed and latching speed from top
regulating valves. · Back check effect. · Cast iron body. · Cement box in hot zinc plated. · Interchangeable spindle from 0 to +30 mm. · Available without hold open, with hold-opening
angle 90° and 105°.
04
3 368 1 1 4EN 1154:1996+A1:20020425 DO.0663
ASSA ABLOY Italia S.p.A. a Bovaresa, 13Vi
40017 San Giovanni in PersicetoBologna - Italy
76 Door closers DC475
Door width up to 1400 mm
Closing speed Variable between 150°- 0°
Latching speed Variable between 15°- 0°
Weight 7.3 kg
Height 82 mm
Length 345 mm
CE marking for building products Yes
Width 78 mm
DIN direction Left / Right handed doors or double action
Variable adjustable closing force EN 3 - 6
Fire and smoke protection Yes
Hold-open mode 90°/105°/Non Hold Open
Certi�ed in compliance with EN 1154
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors.- Hold open at 90°,105° and non hold open.- Variety of available spindles: square Italian, rectangular German.- Architectural �nishes: coverplate in polished stainless steel, satin stainless steel, polished brass.
Builders - Universal for left/right handed and double action doors.- Overpreassure relief valve to protect unit against abuse.- Large range of adjustment within cement box to solve possible alignment problems on the site without taking down the door.
Trade - Reduced inventory costs due to modular product range.- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range.
User - Adjustable operating force to meet door construction requirements and user needs.- Easier door opening and improved accessibility due to Cam-Motion technology.- Backcheck feature offers optimum protection for doors and walls.
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC475ASSA ABLOY Floor spring DC475 featuring Cam-Moti-on technology in compliance with EN 1154, cycle test over 1,000,000 cycles · Closing power variable adjustable, EN size 3-6, for
doors up to 1400 mm wide · Closing speed, latch speed adjustable from top regu-
lating valves · CE approved · 9 mm height adjustable within cement box · Suitable for Left/Right handed and double leaf doors
AC384 - Top pivot for left or right doors
AC612- Sealing Compound for �oor springs
AC269 - Cover plate for DC475
Colour: Polished stainless
steel Satin stainless steel Polished brass
Accessories: AC115 - Reversible
Bottom Arm Italian spindle
AC393 - Reversible Bottom Arm German Spindle
AC8 - Double action Top Pivot
AC583 - Right and left bottom arm. Square Italian spindle
AC392 - Right & Left bottom Arm German Spindle
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
77 Door closers DC475Dimensional drawings
0
013
±14±
1
82
57-62
78
36-4
236
-42
7 345365
104
Double action door mounting.
36
36
36
36
Right-handed door mounting.
36
3636
36
Left-handed door moun-ting.
78 Door closers DC475Dimensional drawings
3652
104
AC269Available in satin stainless steel, polished stainless steel and polished brass.
753523
33 120
21
201
0
28
AC115Reversible bottom arm in steel for double action doors.
2124
10
5454
15335
27
62
AC393Reversible bottom arm in steel for double action doors.
22
Ø14
10 90 10
132
40
25 6620
27
AC8Double action top pivot.
79 Door closers DC475Dimensional drawings
200
50
34
36 56
20
46 46 46
18 10
3°
AC583Right and left bottom arm in steel for single ac-tion doors, 36 mm offset. Square Italian spindle. Sil-ver painted ABS covers.
18
20
5636
34
50 46 46
200
46
3°
10
AC392Right and left bottom arm in steel for single ac-tion doors, 36 mm offset. Rectangular German socket. Silver painted ABS covers.
20
20,5
20,5
6,5
6,5
200
464650
34
3656
46
AC384Double action top pivot in full steel 36 mm offset. Silver painted ABS covers.
1-2
mm
AC612Sealing Compound for �oor springs.
80 Door closers DC475Dimensional drawings
AC 340
AC 360
AC 341
AC 361
AC 342
AC 362
AC 343
AC 363
AC 344
AC 364
AC 345
AC 365
AC 346
AC 366
IT
DE
50 10
15 20 25 30
Detachable spindles
Description Order no.
AC269 Cover Plate for DC475 - Satin Stainless Steel
AC269 Cover Plate for DC475 - Polisched Stain-less Steel
AC269 Cover Plate for DC475 - Polished Brass
DC475.0 Floorspring size 3/6 with Hold Open at 105°
DC475.5 Floorspring size 3/6 with Hold Open at 90°
DC475.2 Floorspring size 3/6 without Hold Open
Detachable Italian Spindle h = 0 mm - zinc plated
Detachable Italian Spindle h = 5 mm - zinc plated
Detachable Italian Spindle h = 10 mm - zinc plated
Detachable Italian Spindle h = 15 mm - zinc plated
Detachable Italian Spindle h = 20 mm - zinc plated
Detachable Italian Spindle h = 25 mm - zinc plated
Detachable Italian Spindle h = 30 mm - zinc plated
Detachable German Spindle h = 0 mm - zinc plated
Detachable German Spindle h = 5 mm - zinc plated
Detachable German Spindle h = 10 mm - zinc plated
Description Order no.
Detachable German Spindle h = 15 mm - zinc plated
Detachable German Spindle h = 20 mm - zinc plated
Detachable German Spindle h = 25 mm - zinc plated
Detachable German Spindle h = 30 mm - zinc plated
Detachable French Spindle h = 30 mm - zinc plated
Double Action Top Pivot Silver.
Double Action Top Pivot Black.
Right & Left bottom arm. Rectangular German Socket Silver.
Right & Left bottom arm. Rectangular German Socket Black.
Spindle Steel
Right & Left bottom arm. Square Italian Spindle Silver.
Right & Left bottom arm. Square Italian Spindle Black.
Sealing Compound for �oorsprings.
81 Door closers DC477
261
15 ±
1 49-59
277
5± 1
294
130
110
94
70
F
ASSA ABLOY DC477 · Floor spring with adjustable closing force for large
and heavy doors · Certi�ed in compliance with EN 1154, size 2-4, cycle
test over 1,000,000 cycles · Suitable for �re and smoke protection doors · For double and single action doors up to 170 kg
Characteristics DC477 · From 175° in both door swing directions with hyd-
raulic control from 150°. · Two thermodynamic valves for consistent perfor-
mance. · Adjustable door speed and latching speed from top
regulating valves. · Back check effect. · Cast iron body. · Cement box in hot zinc plated. · Interchangeable spindle from 0 to + 30 mm. · Available without hold open, with hold-opening
angle 90° and 105°.
10
3 248 1 1 4EN 1154:1996+A1:2002
ASSA ABLOY Italia S.p.A. Via Modena, 6840017 San Giovanni in PersicetoBologna - Italy
0425.DO.2221
82 Door closers DC477
Door width up to 1100 mm
Closing speed Variable between 150°- 0°
Latching speed Variable between 15°- 0°
Weight 5.4 kg
Height 70 mm
Depth 110 mm
Length 277 mm
CE marking for building products Yes
DIN direction Left / Right handed doors or double action
Variable adjustable closing force EN 2-4
Fire and smoke protection Yes
Hold-open mode 90°/ 105°/ Non Hold Open
Certi�ed in compliance with EN 1154
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors.- Hold open at 90°, 105° and non hold open version.- Variety of avaible spindles: square Italian, rectangular German.- Architectural �nishes: cover plates in ploshed stainless steel, satin stainless steel, polished brass.
Builders - Universal for left/right handed and double action doors.- Overpreassure relief valve to protect unit against abuse.- Large range of adjustment within cement box to solve possible alignment problems on the site without taking down the door.
Trade - Reduced inventory costs due to modular product range.- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range.
User - Ideal for residential interiors thanks to adjustable opening/closing force that makes opening/closing easy.- Adjustable operating force to meet door construction requirements and user needs.- Easier door opening and improved accessability due to Cam-Motion technology.- Backcheck feature offers optimum protection for doors and walls.
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective �eld of business.
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Speci�cations for DC475ASSA ABLOY Floor spring DC477 featuring Cam-Moti-on technology in compliance with EN 1154, cycle test over 1,000,000 cycles · Closing power variable adjustable, EN size 2-4, for
doors up to 1100 mm wide · Closing speed, latching speed and backcheck adjus-
table from top facing regulating valves · CE approved · 9 mm height adjustable within cement box · Suitable for Left/Right handed and double leaf doors
AC384 - Top pivot for left or right doors
AC612- Sealing Compound for �oor springs
AC534 - Cover plate for DC477
Colour: Polished stainless
steel Satin stainless steel Polished brass
Accessories: AC115 - Reversible
Bottom Arm Italian spindle
AC393 - Reversible Bottom Arm German Spindle
AC8 - Double action Top Pivot
AC583 - Right and left bottom arm. Square Italian spindle
AC392 - Right & Left bottom Arm German Spindle
You can �nd the com-plete speci�cations on the Internet at: www.assaabloy.co.za
83 Door closers DC477Dimensional drawings
0
015
±15,
5±1
70
49-59
110
54-5
754
-57
130
0°±
2°
277294
Double action door mounting.
5
Right-handed door mounting.
62-683
14
Left-handed door moun-ting.
84 Door closers DC477Dimensional drawings
2
294
130
AC534Available in satin stainless steel, polished stainless steel and polished brass.
753523
33 120
21
201
0
28
AC115Reversible bottom arm in steel for double action doors.Square Italian spindle.
2124
10
5454
15335
27
62
AC393Reversible bottom arm in steel for double action doors.Rectangular German spindle.
22
Ø14
10 90 10
132
40
25 6620
27
AC8Double action top pivot.
85 Door closers DC477Dimensional drawings
200
50
34
36 56
20
46 46 46
18 10
3°
AC583Right and left bottom arm in steel for single ac-tion doors, 36 mm offset.Square Italian spindle.Silver painted ABS covers.
18
20
5636
34
50 46 46
200
46
3°
10
AC392Right and left bottom arm in steel for single ac-tion doors, 36 mm offset.Rectangular German socket.Silver painted ABS covers.
20
20,5
20,5
6,5
6,5
200
464650
34
3656
46
AC384Double action top pivot in full steel 36 mm offset.Silver painted ABS covers.
86 Door closers DC477Dimensional drawings
AC 340
AC 360
AC 341
AC 361
AC 342
AC 362
AC 343
AC 363
AC 344
AC 364
AC 345
AC 365
AC 346
AC 366
IT
DE
50 10
15 20 25 30
Detachable spindles
1-2
mm
AC612Sealing Compound for �oor springs.
Description Order no.
AC534 Cover Plate for DC477 - Satin Stainless Steel
AC534 Cover Plate for DC477 - Polished Stainless Steel
AC534 Cover Plate for DC477 - Polished Brass
DC477.2 Floorspring size 2/4 without Hold Open
DC477.5 Floorspring size 2/4 with Hold Open at 90°
DC477.0 Floorspring size 2/4 with Hold Open at 105°
Detachable Italian Spindle h = 0 mm - zinc plated
Detachable Italian Spindle h = 5 mm - zinc plated
Detachable Italian Spindle h = 10 mm - zinc plated
Detachable Italian Spindle h = 15 mm - zinc plated
Detachable Italian Spindle h = 20 mm - zinc plated
Detachable Italian Spindle h = 25 mm - zinc plated
Detachable Italian Spindle h = 30 mm - zinc plated
Detachable German Spindle h = 0 mm - zinc plated
Detachable German Spindle h = 5 mm - zinc plated
Description Order no.
Detachable German Spindle h = 10 mm - zinc plated
Detachable German Spindle h = 15 mm - zinc plated
Detachable German Spindle h = 20 mm - zinc plated
Detachable German Spindle h = 25 mm - zinc plated
Detachable German Spindle h = 30 mm - zinc plated
Double Action Top Pivot Silver.
Double Action Top Pivot Black.
Right & Left bottom arm. Rectangular German Socket Silver.
Right & Left bottom arm. Rectangular German Socket Black.
Right & Left bottom arm. Square Italian Spindle Silver.
Right & Left bottom arm. Square Italian Spindle Black.
Sealing Compound for �oorsprings.
87 Door closers DC477Order placement information
88 Door closers
Conc
eale
d sy
stem
s
DC820
230
275
3
71.5
9
19
46029
99.5
32
F
ASSA ABLOY DC820 ∙ Concealed door closer with rack and pinion techno-
logy and guide rail ∙ Certified in compliance with EN 1154 ∙ Suitable for fire and smoke protection doors (EN3
model) ∙ For single action doors up to 950 mm wide
Characteristics DC820 ∙ Can be used for left and right handed doors ∙ Opening angle up to 120° ∙ Closing speed and latching speed adjustable from
top via regulating valves ∙ Standard colours: silver EV1
12
8 1 14 32/3
DC820 Series Door CloserASSA ABLOY (Zhongshan) Security
Technology Company LtdChrysanthemum Road East, Xiaolan, Zhongshan, Guangdong, P.R. China
1162-CPD-588 EN1154: 1996+ A1 : 2002
Dangerous substances: None
89 Door closers
Conc
eale
d sy
stem
s
DC820
Closing force EN 2, EN 3
Door width up to 950 mm
Closing speed Variable 150° – 0°
Latching speed Variable 15° – 0°
Weight 0.97 kg
Height 76.5 mm
Depth 32 mm
Length 230 mm
CE marking for building products Yes
DIN direction Left / Right handed
Fire and smoke protection (Please check the useability according your local regulations)
Yes (EN3 model)
Certified in compliance with EN 1154
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design
Builders - Slim size (32 mm wide) that fits almost any door- Suitable for left and right handed doors- One installation template
User - Concealed installation- Adjustable closing speed
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective field of business.
You can find the com-plete specifications on the Internet at: (Link of your companies homepage)
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Specifications for DC820ASSA ABLOY Door Closer DC820 with guide rail ∙ Concealed installation ∙ Closing force: EN2 and EN3 ∙ Closing and latching speed adjustable ∙ For fire and smoke protection doors ∙ CE approved ∙ Suitable for left and right handed doors
Colour:£ Silver EV1
90 Door closers
Conc
eale
d sy
stem
s
DC820Dimensional drawings
628
460
148148 148 8
19
9
81
3
95.5 22 230.5 167.5
Door Frame
Door
Installation dimensions for standard applicationRight handed door shown in diagram
167.5230.52295.5
81
9
19
Door Frame
Door
62 8 148 148 148 8
3
460
Installation dimensions for top jamb applicationRight handed door shown in diagram
95.5
62460148 148 148
Door Frame
Door
8
81
9
22230.5167.5
3
8
19
Installation dimensions for standard applicationLeft handed door shown in diagram
95.522230.5167.5
81
9
62148148148
460
Door Frame
Door19
88
8
Installation dimensions for top jamb applicationLeft handed door shown in diagram
91 Door closers
Conc
eale
d sy
stem
s
DC820Dimensional drawings
275 95.5
103260
19
220 20
460
230
1 2
195
148
32
70148
19
148 Installation dimensions for standard door moun-tingRight handed door shown in diagramLeft handed door is the reverse
3
68.5
32
29
19
12
Description Order no.
DC820 EN size 2; silver EV1
DC820 EN size 3; silver EV1
92 Door closers
Conc
eale
d sy
stem
s
DC840
338
45
440
9
12(2
1,5)
278
474
3
20 (31)
66(
75.5
)
32
F
ASSA ABLOY DC840 ∙ Concealed door closer with Cam-Motion technology
and small standard concealed guide rail G892 or standard concealed guide rail G893
∙ Fulfils barrier-free building requirements (DDA/ CEN TR 15894)
∙ Certified in compliance with EN 1154, size 1-4 ∙ Suitable for fire and smoke protection doors ∙ For single action doors up to 1100 mm wide
Characteristics DC840 ∙ Can be used for left and right-handed doors ∙ Closing speed and latching speed adjustable from
top via regulating valves ∙ Built-in backcheck ∙ Thermodynamic valves for consistent performance ∙ Opening angle up to 120° ∙ Large range of applications ∙ Versions with 4 mm and 8 mm spindle extensions ∙ Standard colours: silver EV1 ∙ Customised finishes available on request
Characteristics of standard guide rail G892 ∙ Small size guide rail ∙ For standard applications ∙ Installation dimensions: see diagram
Characteristics of guide rail G893 ∙ Guide rail suitable for equipping with hold-open
device and backcheck ∙ Installation dimensions: see diagram (dimensions in
brackets)
11
8 4 1 113 3
Abloy OyPO Box 10880101 Joensuu,Finland
0432-CPD-0047 EN1154:1996+A1:2002
93 Door closers
Conc
eale
d sy
stem
s
DC840
Variable adjustable closing force EN 1-4
Door width up to 1100 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Closing speed variable 120° - 0°
Latching speed variable 7° - 0°
Opening angle ca. 120°
Weight 1.4 kg
Height 45 mm
Depth 32 mm
Length 278 mm
Certified in compliance with EN 1154
CE marking for building products yes
Project planners - Extensive range of uses: fire, smoke protection and standard doors- Fulfils barrier-free building requirements (DDA, CEN/TR 15894)- Comprehensive functions, standard or optional
Builders - Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Easier door opening and improved accessibility due to reapidly decreasing torque- Largely unaffected by temperature fluctuations thanks to thermodynamic valves
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective field of business.
You can find the com-plete specifications on the Internet at: (Link of your companies homepage)
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Specifications for DC840ASSA ABLOY Concealed Door Closer DC840 with Cam-Motion Technology and concealed guide rail in com-pliance with EN 1154 ∙ Closing power continuously adjustable, EN size 1-4,
for doors up to 1100 mm wide ∙ Closing speed, latching speed and closing force con-
tinuously adjustable when installed ∙ CE approved ∙ Suitable for left and right handed doors ∙ Additional verification of suitability required for the
respective fire or smoke protection door
Accessories:£ Small concealed guide
rail G892£ Standard concealed
guide rail G893£ Mechanical hold open
device A152 for G893£ Mechanical opening
damper A153 for G893
£ Mechanical hold open device A156 for G892
£ Mechanical opening damper A157 for G892
£ Fixing plate A162
Colour:£ Silver EV1£ Customised finish
94 Door closers
Conc
eale
d sy
stem
s
DC840Dimensional drawings
128474
200 200 165
31 (20)
136,5457
32 (21)
R 8
Installation dimensionsDimensions markedwith * for 4mm spindeleextension.Dimensions markedwith ** for 8mm spindleextension.Right handed door shown in diagramLeft handed door is the reverse
31(20)
21,5
(12)
9/ 1
3*/ 1
7**
3
42
32
Max 20Max 10
440x31(440x20)
12
278x32
177,5
829
320
20
9
286 99
R 8
33
95 Door closers
Conc
eale
d sy
stem
s
DC840Accessories
Hold open device A152Mechanical hold-open device for doors which sometimes need to be secured in the open position.Simple fitting into guide rail G893.Hold-open angle max. 120°.Adjustable hold-open force.Not approved for use on fire and smoke protection doors.
Opening damper A153Helps to prevent the door and door handle from hitting a return wall.Simple fitting into guide rail G893, does not replace a door stop.
Opening damper A157Helps to prevent the door and door handle from hitting a return wall.Simple fitting into guide rail G892, does not replace a door stop.
Fixing plate A162Mounting plate set for metal doors.
Description Order no.
DC 840 EN size 1 – 4, silver EV1
DC840 EN size 1-4, spindle extension 4 mm, silver EV1
DC840 EN size 1-4, spindle extension 8 mm, silver EV1
Concealed Standard Guide Rail G892, small, silver EV1
Concealed Standard Guide Rail G892, small, customised finish
Concealed standard guide rail G893, silver EV1
Description Order no.
Concealed standard guide rail G893, customised finish
Hold open device A152
Opening damper A153
Hold open device A156
Opening damper A157
Mounting Plate A162, galvanised
Hold open device A156Mechanical hold-open device for doors which sometimes need to be secured in the open position.Simple fitting to guide rail G892.Not approved for use on fire and smoke protection doors.
96 Door closers
Conc
eale
d sy
stem
s
DC860
352
54
440
9
12(2
1,5)
290
474
3
20 (31)
75 (8
4.5)
40
F
ASSA ABLOY DC860 ∙ Concealed door closer with Cam-Motion technology
and small standard concealed guide rail G892 or standard concealed guide rail G893
∙ Fulfils barrier-free building requirements (DDA/ CEN TR 15894)
∙ Certified in compliance with EN 1154, size 1-5 ∙ Suitable for fire and smoke protection doors ∙ For single action doors up to 1250 mm wide
Characteristics DC860 ∙ Can be used for left and right-handed doors ∙ Closing speed and latching speed adjustable from
top via regulating valves ∙ Built-in backcheck ∙ Thermodynamic valves for consistent performance ∙ Opening angle up to 120° ∙ Large range of applications ∙ Versions with 4 mm and 8 mm spindle extensions ∙ Standard colours: silver EV1 ∙ Customised finishes available on request
Characteristics of standard guide rail G892 ∙ Small size guide rail ∙ For standard applications ∙ Installation dimensions: see diagram
Characteristics of guide rail G893 ∙ Guide rail suitable for equipping with hold-open
device and backcheck ∙ Installation dimensions: see diagram (dimensions in
brackets)
11
8 5 1 113 2
Abloy OyPO Box 10880101 Joensuu,Finland
0432-CPD-0047 EN1154:1996+A1:2002
97 Door closers
Conc
eale
d sy
stem
s
DC860
Variable adjustable closing force EN 1-5
Door width up to 1250 mm
Fire and smoke protection yes
DIN door swing directions Left / right handed
Closing speed variable 120° - 0°
Latching speed variable 7° - 0°
Opening angle ca. 120°
Weight 2.3 kg
Height 54 mm
Depth 40 mm
Length 290 mm
Certified in compliance with EN 1154
CE marking for building products Yes
Project planners - Extensive range of uses: fire, smoke protection and standard doors- Fulfils barrier-free building requirements (DDA, CEN/TR 15894)- Comprehensive functions, standard or optional
Builders - Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Easier door opening and improved accessibility due to reapidly decreasing torque- Largely unaffected by temperature fluctuations thanks to thermodynamic valves
Our service for you: here you can see the indivi-dual advantages of our door closer models for your respective field of business.
You can find the com-plete specifications on the Internet at: (Link of your companies homepage)
The advantages at a glance
Technical attributes
Technical attributes
Customer segment Advantages
Specifications for DC860ASSA ABLOY Concealed Door Closer DC860 with Cam-Motion Technology and concealed guide rail in com-pliance with EN 1154 ∙ Closing force continuously adjustable, EN size 1-5,
for doors up to 1250 mm wide ∙ Closing speed, latching speed and closing force con-
tinuously adjustable when installed ∙ CE approved ∙ Suitable for left and right handed doors ∙ Additional verification of suitability required for the
respective fire or smoke protection door
Accessories:£ Small concealed guide
rail G892£ Standard concealed
guide rail G893£ Mechanical hold open
device A152 for G893£ Mechanical opening
damper A153 for G893
£ Mechanical opening damper A157 for G892
£ Fixing plate A162
Colour:£ Silver EV1£ Customised finish
98 Door closers
Conc
eale
d sy
stem
s
DC860Dimensional drawings
128474
165 200 200
136,5457
32 (21)
R 8
Installation dimensionsDimensions markedwith * for 4mm spindeleextension.Dimensions markedwith ** for 8mm spindleextension.Dimensions in bracketsare for G892.Right handed door shown in diagramLeft handed door is the reverse
21,5
(12)
9/ 1
3*/ 1
7**
351
40
31(20)
MAX 10
MAX 20
440x31(440x20)
290x40
177,5
334 799920
R8
300 9641
99 Door closers
Conc
eale
d sy
stem
s
DC860Accessories
Hold open device A152Mechanical hold-open device for doors which sometimes need to be secured in the open position.Simple fitting into guide rail G893.Hold-open angle max. 120°.Adjustable hold-open force.Not approved for use on fire and smoke protection doors.
Opening damper A153Helps to prevent the door and door handle from hitting a return wall.Simple fitting into guide rail G893, does not replace a door stop.
Opening damper A157Helps to prevent the door and door handle from hitting a return wall.Simple fitting into guide rail G892, does not replace a door stop.
Fixing plate A162Mounting plate set for metal doors.
Description Order no.
DC860 EN size 1 – 5, silver EV1
DC 860 EN size 1–5, spindle extension 4 mm, silver EV1
DC 860 EN size 1–5, spindle extension 8 mm, silver EV1
Concealed Standard Guide Rail G892, small, silver EV1
Concealed Standard Guide Rail G892, small, customised finish
Concealed standard guide rail G893, silver EV1
Description Order no.
Concealed standard guide rail G893, customised finish
Hold open device A152
Opening damper A153
Hold open device A156
Opening damper A157
Mounting Plate A162, galvanised
Hold open device A156Mechanical hold-open device for doors which sometimes need to be secured in the open position.Simple fitting to guide rail G892.Not approved for use on fire and smoke protection doors.
162 Door closers
We
rese
rve
the
right
to m
ake
tech
nica
l mod
i�ca
tions
.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
ASSA ABLOY SA176 Progress [email protected] l . + 27 11 761 5000Fax. +27 11 766 3570www.assaabloy.co.za