DRINKS LIBRARY STYLEGUIDE © SKUvantage | www.skuvantage.com.au | Version 3.1

IMAGE SPECIFICATIONS

These image specsifications are the minimum requirement for images to be accepted and printed across leading Australian retailers. When submitting an image for Drinks Library, these specifications must be met.

- Files named as product barcode (e.g. barcode-1.tif, barcode-2.tif)- Minimum image resolution: 300 dpi- Minimum pixel dimensions: 3550 pixels (longest edge)- Minimum print dimensions: 300mm (longest edge)- File type: psd, tiff, eps, png or first generation jpeg.- No sharpening applied to the image- Clipping path provided named “Path 1”- Colour space must be RGB - Preferred colour profile: Adobe RGB(1998)- Where product is white, ensure white points hold a maximum RGB value of 250/250/250 - Where a product is black, ensure black points hold a minimum RGB value of 15/15/15

Drinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 2

Image resolution 300dpiColour space RGB

Longest edge ofproduct must be a minimum of - 300 mm- 3550 pixels

Clipping Path -------

Maximum RGBvalue of whitesR: 250G: 250B: 250

Minimum RGBvalue of blacksR: 15G: 15B: 15

---------------

---------------

ANGLE SPECSIFICATIONS

Photographic 2D AngleAll products must be supplied with a 2D angle. The depth of the product is not seen, a 2D angle shows only the height and width of the product. - Front-on- No side, top or bottom of product visible- Square both horizontally & vertically

Photographic 3D AngleMost products benefit from a 3D angle. The height, width and depth of a product is shown in a 3D angle. The following guidelines must be followed for consistency purposes.

Drinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 3

3D SPECIFICATIONS

4 pack, 6 pack & Cases- Elevated camera angle to expose the top edge of the product- Left corner of the product sits forward with the vertical edge maintaining a 90 degree upright position- Bottom edge of product sits on a 4 degree angle to the horizontal

Round cans or bottles- Tilted forward to show depth and the top of product. The tilted angle should be 10% of the width of the product- The vertical axis of the product is aligned to the edge of the canvas

Drinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 4

SAMPLE GUIDELINES

SamplesIf image guidelines cannot be met, a sample of the product can be sent to SKUvantage for full data capture and photography. Products sent to SKUvantage must arrive fit for photography. If a product arrives unfit for photography a replacement sample will be requested or extra charges for post production editing may be incurred.

Reasons for sample rejection - Torn packaging- Crooked label- Scratches or scuff marks- Visible glue, tape or moisture damage

Delivery and collection cost is to be covered by the client. If the product is not

collected from SKUvantage within 14 days of shoot completion, the product will

be disposed of.

LightingThe client can specify the lighting requirements from either the following examples or please provide an image reference.

Drinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 5

LIGHTING EXAMPLES - soft

Rim highlightEven light Spot highlight Strip highlight

Drinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 6

LIGHTING EXAMPLES - hard lightDrinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 7

LIGHTING EXAMPLES - spiritsDrinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 8

CONTACT

SKUvantage Pty Ltd

For further information visit www.skuvantage.com.auSKUlibrary application: http://application.skulibrary.com.auEmail: info@skuvantage.com

Phone: 02 9939 4947

Studio Manager: marnie.vaughn@skuvantage.comCOO: Joshua Gavin. josh@skuvantage.comCEO: Daniel Roberts. daniel@skuvantage.com

Drinks Library | www.drinkslibrary.com.au | STYLEGUIDE v.4.1 Page 9