Date post: | 13-Apr-2017 |
Category: |
Design |
Upload: | rabdesignlighting |
View: | 362 times |
Download: | 0 times |
DVAKS LED – 10 minute retrofit
March, 2015
Replace the incandescent DVAKS with an LED DVAKS
Get the same industrial look with better light output and an 86% reduction in energy consumption
Step 1
Remove guard from existing fixture
Step 2
Remove glass from fixture
Step 3
Remove bulb from existing fixture
Step 4
Undo screws and remove socket assembly from existing junction box.
Step 5
Remove screws from mounting plate of LED fixture .
Step 6
Attach plate and gasket to the existing junction box.
Step 7
Attach LED fixture onto the junction box
Step 8
Glass can be easily screwed onto the LED fixture
Step 9
Attach guard over the glass to complete install
You’re done!
Thank you!