Portable dewatering pumps
DW range 0.7 - 20 kW
GRUNDFOS WASTEWATER
Efficient state-of-the-art dewatering pumps
> DurabilityThe Grundfos DW pumps are made entirely of high-grade non-corrosive materials.
> VersatilityThe Grundfos DW pumps are suitable for a variety of purposes.
> ReliabilityThe pumps are built to perform under the toughest working conditions, round the clock, day in and day out.
> Easy to serviceWear parts are easy to replace and no special tools are required.
> Easy to handleThe compact design in combination with quick-coupling discharge ports make the pumps easy to transport and put into operation.
Grundfos offers a complete range of highly efficient dewatering pumps incorporating state-of-the-art technology. The range comprises a series of pumps from 0.8 kW to 20 kW with a flow rate of 100 l/sec.
We demand more of our pumps than you ever willDemands on portable dewatering pumps are high, but the demands that we place on our products are even higher. Only the hardest wearing materials are used for the Grundfos DW (dewatering) range. Every single component has been examined and improved upon wherever necessary to bring you maximum performance in every detail.
Unique user benefitsThe Grundfos DW pumps form part of a complete range of wastewater and sewage handling products. Like all Grundfos products the DW pump series offer unique customer benefits, making them the natural choice for any job where raw water needs to be pumped - whether from construction sites, mining pits, excavations, or flooded basements, etc.
> �
> �
Advanced technology incorporated into an exceptional range of pumps
The Grundfos DW range is built to last longer than conventional dewatering pumps. This is achieved through extensive use of high-grade materials such as chromium steel, nitril rubber, silicon carbide (SiC/SiC) and aluminium alloy. Various protection devices minimise potential system damage caused by overheating, whilst an integrated level switch (optional) monitors water level and automatically starts and stops the pump.
Can do moreThe Grundfos DW pumps are capable of pumping water containing abrasive materials such as sand and clay particles, drill cuttings, and other potenti-ally damaging objects that could be found on rock faces, at construction sites or in mine shafts.
The Grundfos DW pumps are suitable for all kinds of drainage and dewa-tering jobs: > Tunnels > Mines> Quarries > Gravel pits > Steel works > Fish ponds> Construction sites
Tough wear partsIn order to provide protection against abrasives in the pumped liq-uid, the hardened stainless steel impeller is fitted between rubber-parts. When the diffuser becomes worn, it is easily adjusted against the impeller by means of the staybolts. This ensures that the high performance of the pumps can be maintained. A rubber liner protects against wear inside the cool-ing jacket.
Optimum performance and easy handlingThe Grundfos DW pumps are designed to reduce downtime and to make replacement of components as quick and easy as possible. With an adjustable diffuser, optimum performance can be maintained for extended operation. Many components are
Performance range
�
Attention to detail...
The Grundfos DW range is designed with attention to every detail to ensure optimum performance and years of trouble-free operation.
Air valve for water level compartment.
Integrated on/off switch for automatic start and stop (A), or for continuous pump operation (B).
Electrodes for monitoring the water level in the water level compartment and automatic operation of the pump. 24 V control voltage. No moving parts for start and stop signal.
Stator is insulation class F (155 C). Built-in thermal switch for protec-tion of the motor. The motor will stop before over-heating can cause any damage to the system.
Tight-fitting, wear resistant nitrile rubber impeller back plate.
Rubber covered handle
o
� Details > �
Electrical control func-tions are integrated in both
direct-on-line and star-delta pump starting. This means
only one cable is required to operate the pump.
Special low-weight, shock-resistant aluminium
alloy stator housing, pump sleeve and top cover.
Replaceable, wear-resist-ant nitrile rubber lining
where water velocity is at its highest.
Heavy-duty, greased-for-life ball bearings.
Double shaft seal system with intermediate oil chamber. SiC/
SiC primary seal.
Wear-resistant stainless steel (550 HB) semi-open
impeller.
Tough, wear-resistant nitrile rubber diffuser. Easily
replaceable and adjustable to ensure that optimum
performance is maintained throughout the pump’s life.
- enables the DW range to lead the field
Pump range >�
The Grundfos DW range
DW.50.08.1 – single-phaseMotor: 0.8 kW, 2800 rpmMax. power input: 1.3 kWDischarge: R 2 or 2” hoseWeight: 13 kg (without cable)
DW.50.08.3 – three-phaseMotor: 0.8 kW, 2800 rpmMax. power input: 1.3 kWDischarge: R 2 or 2” hoseWeight: 13 kg (without cable)(With polypropylene pump sleeve)
DW.50.07.1 – single-phaseMotor: 0.7 kW, 2800 rpmMax. power input: 0.9 kWDischarge: R 2 or 2” hoseWeight: 18 kg (without cable)
DW.50.09.3 – three-phaseMotor: 0.9 kW, 2800 rpmMax. power input: 1.3 kWDischarge: R 2 or 2” hoseWeight: 18 kg (without cable)
DW.65.27 – three-phaseMotor: 2.7 kW, 2800 rpmMax. power input: 3.4 kWDischarge: R 2 1/2 or 2 1/2” hoseWeight: 33 kg (without cable)
The Grundfos DW pumps are portable submersible pumps with vertical discharge port. They are designed to meet the operating conditions typical of construction sites, excavations, and in the mining industry where the pumped liquid often contains sand, drill cuttings, and similar abrasive particles.
These demands are met by using only high-grade materials. All pumps are available with or without automatic level control.
(Performance overview according to ISO 9906 annex A).
Pump range >�
DW.100.66.H – three-phaseMotor: 6.6 kW, 2800 rpmMax. power input: 6.5 kWDischarge: R 4 or 4” hoseWeight: 51 kg (without cable)
DW.100.66 – three-phaseMotor: 6.6 kW, 2800 rpmMax. power input: 7.8 kWDischarge: R 4 or 4” hoseWeight: 51 kg (without cable)
DW.65.39 – three-phaseMotor: 3.9 kW, 2800 rpmMax. power input: 5.7 kWDischarge: R 2 1/2 or 2 1/2” hoseWeight: 38 kg (without cable)
DW.100.39 – three-phaseMotor: 3.9 kW, 2800 rpmMax. power input: 4.8 kWDischarge: R 4 or 4” hoseWeight: 38 kg (without cable)
DW.100.110.H – three-phaseMotor: 11 kW, 2800 rpmMax. power input: 12.8 kWDischarge: R 4 or 4” hoseWeight: 110 kg (without cable)
DW.150.110 – three-phaseMotor: 11 kW, 2800 rpmMax. power input: 15.0 kWDischarge: R 6 or 6” hoseWeight: 110 kg (without cable)
DW.100.200.H – three-phaseMotor: 20 kW, 2800 rpmMax. power input: 23.0 kWDischarge: R 4 or 4” hoseWeight: 148 kg (without cable)
DW.150.200 – three-phaseMotor: 20 kW, 2800 rpmMax. power input: 25.5 kWDischarge: R 6 or 6” hoseWeight: 148 kg (without cable)
Technical data > �
Technical data and dimensions
DW.50.07.1 395 10 212 50/2" 25 6.1 13 1.0 4
DW.50.07.A1 395 210 212 50/2" 25 6.1 13 1.0 4
DW.50.09.3 365 210 212 50/2" 25 9.4 13.5 1.3 2.6
DW.50.09.A3 365 210 212 50/2" 25 9.4 13.5 1.3 2.6
DW.65.27.3 525 246 250 65/21/2 "* 25 17 17.3 3.4 6.2
DW.65.27.A3 5 25 246 250 65/21/2 "* 25 17 17.3 3.4 6.2
DW.65.39.3.H 590 246 275 65/21/2 "* 25 22.2 22.8 5.7 8.6
DW.65.39.A3.H 5 90 246 275 65/21/2 "* 25 22.2 22.8 5.7 8.6
DW.100.66.3.H 7 10 246 275 100/4" 25 16.6 42 6.6 12.5
DW.100.66.A3.H 710 246 275 100/4" 25 16.6 42 6.6 12.5
DW.100.39.3 5 90 246 275 100/4" 25 31.9 18.1 5.6 8.6
DW.100.39.A3 590 246 275 100/4" 25 31.9 18.1 5.6 8.6
DW.100.66.3 7 10 246 275 100/4" 25 41.6 32 7.8 12.5
DW.100.66.A3 710 246 275 100/4" 25 41.6 32 7.8 12.5
DW.100.110.3.H 850 360 410 100/4" 20 21.9 77 12.8 21
DW.100.110.A3.H 850 360 410 100/4" 20 21.9 77 12.8 21
DW.150.110.3 850 360 410 150/6" 20 68.9 28.5 15 23
DW.150.110.A3 850 360 410 150/6" 20 68.9 28.5 15 23
DW.100.200.3.H 1000 360 410 100/4" 20 28.6 98.2 23 40
DW.100.200.A3.H 1000 360 410 100/4" 20 28.6 98.2 23 40
DW.150.200.3 1000 360 410 150/6" 20 82.7 42.1 25.5 41
DW.150.200.A3 1000 360 410 150/6" 20 82.7 42.1 25.5 41
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
[[
Pump typeH
[mm]D
[mm]M
[mm]
S[mm]/[inch]
installation depth
[m]
Max. Q[l/sec]
Max. Istart head[m]
P 1
Max[kW]
0.25
0.25
0.25
0.25
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
Oil[l]
148
148
17
18
17
18
30
30
36
36
51
51
36
36
51
51
110
110
110
110
148
148
Weight[kg]
Single-phase pumps
Three-phase pumps
Pump typeH
[mm]D
mm]M
[mm]
Smm]/
[inch]
Max. installation
depth[m]
Max. Q[l/sec]
Max. head[m]
P 1
[kW]Max
[A]
Filled with
grease
Weight[kg]
DW.50.08.1 432 200 200 50/2" 5 8.8 14.3 1.3 6 6666
x 1 3DW.50.08.A1 432 200 200 50/2" 5 8.8 14.3 1 .3 6 x 1 3DW.50.08.3 432 200 200 50/2" 5 8.3 15.1 1.3 2 .5 x 1 3DW.50.08.A3 432 200 200 50/2" 8.3 15.1 1 .3 2 .5 x 1 3
Pumps with polypropylene pump sleeve
Dimensional sketch Type keyM S
H
D
Example DW .50 .09 .A 3 .H
Type range
Nominal diameter of discharge port
Power output P2/100 (W)
Operation:A = With automatic level control = For manual operationVersion:1 = Single-phase3 = Three-phaseH = High-head
Max.
2
5
* With hose connection 3"
IN
[A]IN
IN
Istart
IN
Technical data > �
Material specification
Pumped liquids Motor
The Grundfos DW pumps are specifically designed for pumping dirty water with a high content of abrasives, such as sand, drill cuttings and similar abrasive materials.
Ph-value: 5 to 8.Temperature: 0 C to +40 C.Max. density: 1100 kg/m3.
Two-pole motors for 50 Hz with voltage tolerances of ±10%. As a protection against overload all Grundfos DW pumps have ther-mal overload switches in the stator windings. They break the circuit at 130 C.
Enclosure class: IP 68.Insulation class: F (155 C).
o o
o
o
1
-
Technical data > 10
Pump types and product numbers
All pumps are supplied with 20 metres of cable as standard. Other lengths are available on request.
Note: Pumps without integrated motor starter for direct on-line or star-delta starting must be con-nected to an external control box to protect the motor against overcurrent and overload.
Technical data > 11
Accessories >1�
Accessories
Accessories >1�
1� Level control > 1�
Automatic level control
STAND-BY/STARTThe pump with automatic level control will be in a stand-by position when power is switched on and the water level is low. When the water level rises, the air will escape and the water level compartment will be filled with water.
When water comes into contact with both lower and upper electrode in the water level compartment, an electric circuit will switch on the pump.
STOPWhen the outside water level is below the suction strainer, the pump will start sucking air. Air will be sucked into the water level compartment through the rubber air valve, but as long as the lower electrode is in con-tact with water the pump will continue to operate.
When the water level in the electrode chamber falls to below the lower electrode, the electric circuit is broken and the pump stops.
PUMPING WATERThe water level decreases when the pump operates, but due to the water pressure inside the pump, the rubber in the air valve will expand and close the valve. This maintains a high water level in the water level compartment and the pump continues to operate.
The Grundfos DW pumps incorporate a highly dependable and very efficient automatic level control system, which automatically controls pump operation as the water level varies.
Flat suction – an additional benefitThe model DW.50.08.A1 offers an additional benefit. A special flat suc-tion valve that enables the pump to suck down to floor level is available as an accessory.
The range >1�
The Grundfos wastewater range
Stainless steel heavy-dutysubmersible pumps
Brochure covers the Grundfos range of heavy-duty stainless
steel pumps (SEN) for aggressive and corrosive environments.
Submersible sewage grind-er pumps
Brochure covers the new Grundfos range of sewage grinder
pumps-(SEG) for pumping of wastewater with toilet discharge.
Heavy-duty submersible sewage pumps 1.65 - 29 kW
Brochure covers the Grundfos range of submersible channel-
impeller pumps from 1.65 kW up to 21 kW and SuperVortex pumps
up to 29 kW. All designed for handling
unscreened raw sewage.
Heavy-duty submersiblesewage pumps 2 - 160 kWBrochure covers the Grundfos range of submersible sewage pumpsfrom 2 - 160 kW designed to handle unscreened raw sewage.
Lifting stationsBrochure covers Grundfos lifting stations for individual as well as multi-user applications.
LC/LCD level controllersBrochure covers the Grundfos range of controls for the waste-water pumping systems.
Mixers and flowmakersBrochure covers the new range
of mixers and flowmakers for optimal control of liquids and solids throughout the waste-
water treatment process.
The KP/AP stainless steel range
Brochure covers a wide range of high quality stainless steel pumps
for a variety of domestic and commercial applications.
Super-heavy-duty submersible sewage and raw water pumpsBrochure covers the Grundfos range of super-heavy-duty chan-nel pumps, axial flow pumps, and propeller pumps from 7.5 kW up to 520 kW.
Heavy-duty submersible sewage pumps 15 - 155 kW
Brochure covers the Grundfos range of sewage pumps from 15
kW up to 155 kW for handling of raw sewage in heavy-duty applica-
Being responsible is our foundation Thinking ahead makes it possible
Innovation is the essence
www.grundfos.com
Business with an attitude
Knowledge The sharing of knowledge, experience
and expertise across our global network will always
lead our business forward.
Innovation Combining the best technology with fresh
ways of thinking, we will continue to develop even bet-
ter pumps, systems, services and standards.
Solution With a complete product range, capable
of providing every conceivable water solution, we are
the most complete player on the market.
96
48
50 5
0 1
0 0
3V
ENTU
RE M
ARK
ETIN
G A
S