DYNAPAC LG500

DYNAPAC

SPARE PARTSCATALOGUE

Box 504, SE-371 23 Karlskrona, Sweden

Phone: +46 455 30 60 00, Fax: +46 455 30 60 10

www.dynapac.com

LG500

SLG500-2EN2

Spare Parts Catalogue

We reserve the right to change specifications without notice.Printed in Sweden.

I

Valid from serial number:

Engines:

Forward/Reverse Vibratory Plate CompactorLG 500

SLG500-2EN2

Hatz 1D81

Published catalogue issues valid for these plate compactors:Catalogue Issue dateSLG500-2EN1 2001 - 06 Replaced by SLG500-2EN1SLG500-2EN2 2005 - 05

*35001253-*

ORDERING SPARE PARTSTo avoid errors in delivery, please give the followinginformation when ordering spare parts:1. Type of machine.2. Roller serial number.3. Quantity required.4. Part number.5. Parts denomination.6. Dimensions when ordering per length.

RESERVDELSBESTÄLLNINGFöljande uppgifter ska lämnas vid beställning av reserv-delar för att undvika leveransfel:1. Maskintyp.2. Vältens serienummer.3. Antal av önskad reservdel.4. Reserdelens artikelnummer.5. Reservdelens benämning.6. Måttuppgifter vid beställning av metervara.

ERSATZTEILBESTELLUNGZur Vermeidung von Fehllieferungen sind bei der Bestel-lung von Ersatzteilen folgende Angaben zu machen:1. Maschinentyp.2. Herstellungsnummer.3. Bestellmenge. (Quantity)4. Ersatzteilnummer. (Part Nº)5. Ersatzteilbenennung. (Denomination)6. Massangaben bei Bestellung von Meterware.

ORDINI DI RICAMBIPer evitare errori nelle consegne di ricambi, Vi preghiamodi comunicarci le seguenti informazioni al momento dell'ordinazione:1. Tipo di macchina.2. Numero di serie della macchina.3. Quantità dei pezzi desiderati. (Quantity)4. Numero di codice del pezzo. (Part Nº)5. Descrizione del pezzo di ricambio. (Denomination)6. Misura, in caso di ordine per metro.

PEDIDO DE RECAMBIOSPara evitar errores en las entregas, deberán indicarse lossiguientes datos al hacer un pedido de recambios:1. Tipo de máquina.2. Número de serie.3. Cantidad de piezas deseadas. (Quantity)4. Número de artículo de la pieza de recambio. (Part Nº)5. Denominación de la pieza. (Denomination)6. Indíquese la medida al solicitar un artículo que se

expide por metros.

COMMANDE DE PIECES DE RECHANGELes indications suivantes doivent être fournies lors de lacommande de piéces de rechange, afin d'éviter toute erreurde livraison:1. Type de machine.2. Numéro de série.3. Quantité désirée de pièce de rechange. (Quantity)4. Numéro de la piéce de rechange. (Part Nº)5. Dénomination de la piéce de rechange. (Denomination)6. Longueur en cas de commande au mètre.

YOUR AGENT/DEALER:

II

III

Notes

GROUP PAGE NOTESPARTS SERVICEINFO INFO

Changes

31

1

Text pagesThe text pages is structured as thepicture on the right.1. This is the remarks forspecific items and the descriptionsof the remarks is at the bottom ofthe parts list.2. Parts indicated by a dot andmoved to the right are includedwhen buying the assembled unitabove.3. Spare parts and service codefor a specific part, mainly forinternal use at Dynapac. "A" =Service part, "B" = Fast movingpart, "C" = Suggested exchangedpart and "D" = Regular spare part.

2

Notes

IV

CatalogueValid from serial number:

1.1.1.1.1.

PÄRMETIKETTFör att undvika fel vid reservdelsbeställning finns härnedan två etiketter som passar i fickorna på pärmarnasryggar. På dessa kan man se från vilket vältnummer avaktuell maskin reservdelskatalogen gäller. Gör så här:1. Tag denna sida ur pärmen.2. Klipp ut etiketten till VÄNSTER (1) och sätt in den i

fickan på DENNA pärmens rygg.3. Finns det en etikett till HÖGER (2), kan denna an-

vändas på pärmen för FÖREGÅENDE utgåva avdenna katalog.

4. Kasta detta papper.

BINDER LABELTo avoid errors when ordering spare parts use the labelsbelow to identify the catalogues on the back of thebinder. The label contain the serial number range forwhich the catalogue is valid. Do like this:1. Remove this page from the binder.2. Cut out the LEFT label (1) and put it on THIS binders

back.3. If there is a label to the RIGHT (2), it can be used on

thebinder for PRECEDING issue of this catalogue.4. Throw away this paper.

KATALOG-BESCHRIFTUNGZur Vermeidung von Fehlen bei der Ersatzteilbestellungbenutzen Sie bitte die unteren Beschriftungen, um dieKataloge auf der Rückseite zu kennzeichen. Auf derBeschriftung ist angegaben, für welcheMaschinennummern der jeweilige Katalog gültig ist.Ablauf:1. Nehmen Sie dieses Blatt aus dem Katalog.2. Schneiden Sie die LINKE Beschriftung (1) aus. Schie-

ben Sie die Beschriftung in die tasche auf DEMKatalogrücke.

3. Sollte die Beschriftung unten RECHTS (2) mitgeliefertwerden, kennzeichen Sie damit bitte die ÄLTEREAusführung dieses Kataloges.

4. Den Rest dieses Blattes bitte vernichten.

ETICHETTA POSTA SUL RACCOGLITOREPer evitare errori quando ordinate pezzi di ricambio, usatele etichette in calce che servono ad identificare i cataloghisul retro del raccoglitore. L'etichetta indica il numero dimatricola delle maccine prese in considerazione nel catalo-go.1. Rimuovete questa pagina dal raccoglitore.2. Ritagliate l'etichetta posta a SINISTRA (1) e ponetela

sul retro DEL raccoglitore.3. Se trovate anche un'etichetta sulla DESTRA (2),

ritagliatela e ponetela sul raccoglitore relativo allaPRECEDENTE edizione del catalogo.

4. Distruggete questo foglio.

ETIQUETAGE DU CATALOGUEAfin d'éviter des erreurs lors de commandes de pièces derechange, nous vous conseillons d'apposer les marquagesci-dessous à l'arrière du classeur, pour identifier les catalo-gues. Ce marquage indique les numéros de série pourlesquels le catalogue est adapté. Il convient de procéder dela façon suivante:1. Retirez cette page du classeur.2. Découpez l'étiquette de GAUCHE (1), et apposez-la à

l'arrière de CE catalogue.3. Si il y a une étiquette à DROITE (2), vous pourrez

l'apposer sur le classeur de l'edition PRECEDENTE ducatalogue.

4. Détruire cetta feuille.

ETIQUETA PARA LA CARPETAPara evitar errores al pedir repuestos utilicen las etiquetasabajo descritas para identificar los catálogos en la partetrasera de la carpeta. En la etiqueta se ven los númerosde referencia de la serie para la cual es válido el catálogo.Instrucciones:1. Quitar esta página de la carpeta.2. Corta la etiqueta IZQUIERDA (1) y ponerla est ESTA

carpeta en la parte trasera.3. Si hay una etiqueta en la parte DERECHA (2) se puede

utilizar en la carpeta para el catálogo que PRECEDE aesta.

4. Tirar esta hoja.

V

SLG500-2EN2

TC 1

TABLE OF CONTENTS PageDynapac Compaction Equipment AB

LG500 SN 35001253 - 2

Ground plate 4Engine plate and frame 6Engine plate and frame 8V-belt cover Up to SN 35001514 10V-belt cover From SN 35001515 12Option 14

Eccentric element 16Eccentric element 18

Engine 20Engine Hatz 1D81Z 22

Power transmission 26Clutch Up to S/N 35001514 28Clutch From S/N 35001515 30Belt tightener 32

Hydraulic system 34Hydraulic system 36Hydraulic tank 38

Electrical equipment 40Control panel, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78 42Control panel, From S/N: 35002610, 32, 54, 61-62, 79- 44Battery and battery box 46

Handle and controls 48Handle, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78 50Handle, From S/N: 35002610, 32, 54, 61-62, 79- 52Option,dead man handle 54Throttle control 56

Decals and equipment 58Decals and equipment 60

2

LG500 SN 35001253 -

LG500100

Dynapac Compaction Equipment AB

SLG500-2EN2

3

LG500 SN 35001253 -


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Ground plate ( Page 4 )20 Eccentric element ( Page 16 )30 Engine ( Page 20 )40 Power transmission ( Page 26 )50 Hydraulic system ( Page 34 )60 Electrical equipment ( Page 40 )70 Handle and controls ( Page 48 )80 Decals and equipment ( Page 58 )

4

Ground plate


SLG500-2EN2

5

Ground plate


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Engine plate and frame ( Page 6 )20 Engine plate and frame ( Page 8 )30 V-belt cover Up to SN 35001514 ( Page 10 )40 V-belt cover From SN 35001515 ( Page 12 )50 Option ( Page 14 )

6

Engine plate and frame

16060


SLG500-2EN2

7



SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 282714 Ground plate 12 281490-01 Engine plate 13 281475 Protective frame Up to 350015141

386612 Protective frame From 3500151514 281485 Cover 15 281484 Bracket 16 902520 Screw 37 902286 Lock nut M838 508036 Screw 29 904558 Washer 17x30x68

10 586021 Nut M16411 282704 A Plastic cover 212 500048 Screw M10-1,5x20 8,81613 928441 Washer 1614 281482-01 Plate 115 500051 Screw M12-1,75x25 8,8216 924543 Washer 517 282705 B Plastic cover Up to 350015142

386349 Plastic cover Model 35001515118 570008 Nut 819 904232 Washer 17x30x3820 280454 BShock absorber 421 508028 Screw 122 747541 DWasher 223 508036 Screw 224 280544 C Extension plate 225 500101 .Screw M20x50826 615047 .Washer 827 283075 Strap 228 500035 Screw M12x020H329 500028 Screw M10-1,5x25 8,81

A) Long sideB) Short sideC) Option

8


16193


SLG500-2EN2

9



SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 389108 Ground plate 12 281490-01 Engine plate 13 281475 Protective frame 14 281485 Cover 15 281484 Bracket 16 902520 Screw 37 902286 Lock nut M838 508036 Screw 29 904558 Washer 17x30x68

10 586021 Nut M16411 508036 Screw 212 281482-01 Plate 113 500051 Screw M12-1,75x25 8,8214 904213 Washer 13x30x4215 570008 Nut 816 615046 Conical spring washer 817 280454 BShock absorber 418 508028 Screw 119 747541 DWasher 2

10

V-belt cover Up to SN 35001514

17695


SLG500-2EN2

11

V-belt cover Up to SN 35001514


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 A DPlate, cpl 12 281256 .Plate 13 500067 .Screw M8-1,25x55 8,844 615045 .Conical spring washer 45 281257 .Spacer 46 382119 Bracket 17 384012-02 V-belt cover 18 281148 V-belt cover, inner 19 281488-02 Front plate 1

10 281478-02 Protecting plate 111 500035 Screw M12x020H412 500053 Screw M8-1,25x20 8,8413 904556 Washer 8,4x16x3,0414 500048 Screw M10-1,5x20 8,8415 904213 Washer 13x30x4616 500051 Screw M12-1,75x25 8,82

A) Option

12

V-belt cover From SN 35001515

17690


SLG500-2EN2

13

V-belt cover From SN 35001515


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 386614-02 Protective cover 12 386314-02 Bracket 13 386315-02 V-belt cover 14 386659 Insulation 15 791234 Insulating washer 106 386313 Cover 17 386393 Insulation 18 386369 Bracket 19 500056 Screw M12x45 8,82

10 500021 Screw M8-1,25x25 8,8811 904213 Washer 13x30x4412 904556 Washer 8,4x16x3,0813 500051 Screw M12-1,75x25 8,8514 500035 Screw M12x020H115 904213 Washer 13x30x4316 382119 Bracket 117 386316 Plate 118 500048 Screw M10-1,5x20 8,8519 500029 Screw M10-1,5x30 8,8220 904557 Washer 10,5x22x4421 570006 Nut M102

14

Option

17103


SLG500-2EN2

15

Option


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 Extension plate, cpl 12 280544 .Extension plate 23 500101 .Screw M20x5084 615047 .Washer 85 Not used on this model 6 .Not used on this model 7 281879 .Not used on this model 8 586019 .Lock nut M129 600009 .Not used on this model

10 500133 .Screw M12x7011 Polyurethane plate, cpl 112 570007 .Lock nut M128

902287 C .Nut 813 381902 D .Bracket 2

382008 C .Bracket 214 904341 C .Carriage screw 8

500161 D .Screw M10-1,5x45 8,8815 280888 A .Polyurethane plate 1

381903 B .Polyurethane plate 116 904230 D,E .Washer 10,5x22x28

A) Widht = 750 mmB) Widht = 850 mm, use together with extension platesC) Part for polyurethane plate 280888D) Part for polyurethane plate 381903E) Mounted between bracket and screw

16

Eccentric element


SLG500-2EN2

17

Eccentric element


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Eccentric element ( Page 18 )

18

Eccentric element

17368-1


SLG500-2EN2

19

Eccentric element


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 281503 Eccentric element 12 280430 .Eccentric housing 13 508025 .Screw 24 A Hydraulic pump 15 500040 .Screw M6-1x20 8,8246 904228 .Washer 6,4x12x1,5247 281968 .Cover 18 280447 .Cover 19 162011 DWasher, sealing 1

10 232143 Plug 111 928944 Screw 1012 904213 Washer 13x30x41013 380159 .Cylinder 114 380155 Screw 115 280435 .Cover 116 928794 D.Sealing ring 117 508005 Screw 318 904229 Washer 8,4x16x1,5519 500022 .Screw M8-1,25x30 8,8220 387912 .Belt guard 121 150033 .Retaining ring 422 928786 .Ball bearing 423 928787 .Retaining ring 124 280445 .Eccentric shaft 125 280442 .Pin 126 150035 .Snap ring 127 280440 .Gear 128 928796 .Ball bearing 229 280441 .Sleeve 130 280436 D.Eccentric weight 431 928791 .Screw M12-1,75x45H 8,8832 280448 .Stop 133 928798 .Spring 134 381787 .Piston 135 350029 .Key 236 500012 .Screw M6x12237 381783 .Washer 238 928797 .Ball bearing 139 904811 .Support ring 140 111022 .Ball bearing 141 151008 .Retaining ring 142 381786 .Piston rod 143 281502 .Guide 144 281501 D.Piston seal 145 928893 .Sleeve 146 928789 B .Key 147 928894 .Sleeve 148 280431 .Eccentric shaft 149 280450 .Key 150 928788 D.Key 151 150020 .Snap ring 252 280437 .Gear 153 928795 .Sleeve 154 282718 DV-belt pulley 155 280432 .Washer 156 500048 .Screw M10-1,5x20 8,8157 570004 .Nut M6158 508005 .Screw 2

A) See section Hydaulic systemB) Delivred with pump

20

Engine


SLG500-2EN2

21

Engine


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Engine Hatz 1D81Z ( Page 22 )

22

Engine Hatz 1D81Z

16065-1


SLG500-2EN2

23

Engine Hatz 1D81Z


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.Model LG500 man/el

1 382811 A Engine, cpl Up to 350015141386183 A,C Engine, cpl From 350015151379101 Engine, cpl 1382812 B,D Engine, cpl Up to 350015141386184 B Engine, cpl From 350015151379102 Engine, cpl 1938278 Solenoid valve 1

2 935942 D.Fuel tank, cpl 13 239550 D.Fuel strainer 14 937428 .Fuel cap 15 .Injector 16 ..Nozzle 17 239421 D.Muffler 18 239428 .Muffler cover 19 239333 D.Gasket 1

10 500058 .Screw 511 928381 .Washer 6,4x18x1,6512 935610 B .Screw 213 936922 B .Starter 114 935611 B .Washer 215 935612 B .Nut 216 937873 A.Fuel filter 117 935608 .Oil filter cover, cpl 118 239335 B..O-ring 119 239326 A.Oil filter 120 239534 .Screw 121 239533 .Washer 122 239516 .Housing 123 239517 .Washer 124 239518 .Screw 125 239423 A.Air filter element 126 239519 .Bracket 127 239520 .Washer 328 239521 .Nut 129 239522 .Washer 130 239523 .Cover 131 239524 .Bushing 132 239525 .Gasket 133 239887 .Nut 234 239886 .Washer 235 239526 D.Gasket 136 239527 .Cover 137 239532 C .Plug 238 239529 .Washer 139 239530 .Washer 140 239531 .Screw 141 239882 .Elbow 142 935609 C .Plug 143 239883 .Cyclon 144 239382 DSafety crank 145 239553 Collar bearing 146 508096 Screw M10-1,5x25H 8,8247 508092 Screw M8-1,25x20H 8,8248 935752 Washer 249 935753 Gasket 1

A) LG500 manB) LG500 elC) Replaced by 379101D) Replaced by 379102

24

Engine Hatz 1D81Z

16065-1


SLG500-2EN2

25

Engine Hatz 1D81Z


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.50 239504 D .Engine bracket 151 281237 Pin 452 901206 Washer 453 928849 Nut 454 281852 DOil drain, cpl 155 244059 E DHose 1XL56 281116 Ryw-clips 257 281115 Screw 258 281896 B BBattery 159 281202 B DBattery cable (-)160 281201 B DBattery cable (+)161 239508 Lever 162 280772 Bracket 163 500019 Screw M8-1,25x16 8,8264 281183 Crank holder 165 904229 Washer 8,4x16x1,5266 508005 Screw 267 570005 Nut M8268 904556 Washer 8,4x16x3,02

B) LG500 elD) Replaced by 379102E) L=400MM

26

Power transmission


SLG500-2EN2

27

Power transmission


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Clutch Up to S/N 35001514 ( Page 28 )20 Clutch From S/N 35001515 ( Page 30 )30 Belt tightener ( Page 32 )

28

Clutch Up to S/N 35001514

17691


SLG500-2EN2

29

Clutch Up to S/N 35001514


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 280523 DClutch, cpl Up to 3500151412 929355 B.Clutch lining 23 239746 .Weight 24 239747 .Hub 15 Not used on this model 6 935426 .Cover 17 Not used on this model 8 535024 .Screw 29 Not used on this model

10 935427 .Cover 111 239539 .Retaining ring 112 Not used on this model 13 Not used on this model 14 151023 .Retaining ring 115 111178 D.Ball bearing 216 134056 .Sealing ring 117 150015 .Snap ring 218 935736 .Pulley 119 912481 B.Spring 420 286376 AV-belt 221 928441 Washer 122 500048 Screw M10-1,5x20 8,8123 281194 Engine shaft 124 350036 A DKey 125 923862 Screw 426 904556 Washer 8,4x16x3,04

A) Old design. Can only be replaced by item 32 as a unit.

30

Clutch From S/N 35001515

17691


SLG500-2EN2

31

Clutch From S/N 35001515


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 386311 Clutch, cpl From 3500151512 939359 .Clutch lining 23 .Weight 24 Not used on this model 5 939357 .Hub 16 Not used on this model 7 939360 .Cover 18 Not used on this model 9 939361 .Screw 4

10 939362 .Cover 111 939363 .Lock washer 112 938724 D.Ball bearing 113 939356 .Washer 114 938725 .Retaining ring 115 938724 D.Ball bearing 116 938727 .Nilos ring 117 938726 .Snap ring 118 939355 .V-belt pulley 119 421246 B.Spring 420 386312 V-belt 221 904213 Washer 13x30x4222 500048 Screw M10-1,5x20 8,8123 281194 Engine shaft 124 350036 DKey 125 500022 Screw M8-1,25x30 8,8426 904556 Washer 8,4x16x3,04

32

Belt tightener

17693


SLG500-2EN2

33

Belt tightener


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 378060 C Belt tightener, cpl From 35002956,-58,63-2 500051 D .Screw M12-1,75x25 8,813 924543 D .Washer 14 150012 D.Snap ring 15 151019 D.Retaining ring 26 111180 D.Ball bearing 27 378061 .Shaft 18 380517 .V-belt pulley 19 A V-belt

10 380520 B Belt tightener, cpl Up to 35002955,59-62111 500051 .Screw M12-1,75x25 8,8112 924543 .Washer 113 380518 .Shaft 114 150008 .Snap ring 115 151019 D.Retaining ring 216 111180 D.Ball bearing 217 380517 .V-belt pulley 118 A V-belt 19 380519 .Sleeve 120 350123 .Key 121 150012 D.Snap ring 1

A) See section clutchB) Only interchangeable like complete unit, use 378060C) New versionD) Not included in complete belt tightener, P/N 378060

34

Hydraulic system


SLG500-2EN2

35

Hydraulic system


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Hydraulic system ( Page 36 )20 Hydraulic tank ( Page 38 )

36

Hydraulic system

17361


SLG500-2EN2

37

Hydraulic system


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 A Hydraulic tank ( Page 38 )12 281378 D DHydraulic hose 13 313108 Hose clamp 14 383403 C Hydraulic hose 15 234481 Connector 16 G Eccentric element 17 383562 Hydraulic pump 18 791145 Straight adapter 19 383755 Connector 1

10 313003 DHose clamp 15-24211 281466 Adapter 112 234622 Elbow 45 113 383400 B DHydraulic hose 114 383458 Hose holder 115 938163 Measuring nipple 116 500025 Screw M8-1,25x50 8,8517 500026 Screw M8-1,25x60 8,8218 280534 Rubber block 319 100505023 Bracket 320 615043 Washer 8,4x18x2221 500079 Screw M6-1x50 8,8222 615042 Conical spring washer 423 281375 DValve 124 902286 Lock nut M8225 902285 Lock nut M6226 234481 Connector 327 570005 Nut M8128 936595 Rubber Cover 129 100505042 Rod 130 903821 Grab handle 131 281434 E DHydraulic hose 132 937924 F Lever housing 133 313041 Cable ties L=186 mm1

A) See section hydraulic tankB) L=1240MMC) L=780MMD) L=1620MME) L=1400MMF) Included in 281375G) See section eccentric element

38

Hydraulic tank

17228-1


SLG500-2EN2

39

Hydraulic tank


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 381387 A Hydraulic oil tank, CPL Up to 350025711

376676 Hydraulic oil tank, CPL From 3500257212 381566 D .Air filter 13 381563 D .Holder 14 904960 D .Screw 25 381385 D .Cover 16 383038 B .Hose coupling 17 500021 D .Screw M8-1,25x25 8,818 160110 D .O-ring 19 904229 D .Washer 8,4x16x1,51

10 383039 B .Reduction 111 383353 B .Hose coupling 112 480124 B .Washer 113 376674 C Adapter 114 376675 C Adapter 115 904229 Washer 8,4x16x1,5416 500021 Screw M8-1,25x25 8,84

A) Replaced by 1 X 376655, 1 X 376674 and 1 X 376675B) Only included in old hydraulic oil tank, P/N 381387C) Only for new hydraulic oil tank, P/N 376676D) Included in both old and new hydraulic oil tank

40

Electrical equipment


SLG500-2EN2

41

Electrical equipment


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Control panel, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78 ( Page 42 )15 Control panel, From S/N: 35002610, 32, 54, 61-62, 79- ( Page 44 )20 Battery and battery box ( Page 46 )

42

Control panel, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78

17974


SLG500-2EN2

43

Control panel, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 Control panel, cpl 12 281496 .Control panel 13 238158 D.Ignition switch 1

238236 D.Ignition key 14 239466 D.Oil pressure lamp 15 239463 D.Charge lamp 16 985012 D.Bulb 27 904445 Start protect mod. 18 281457 D.Relay 19 287599 D.Relay socket 1

10 903903 .Screw 111 615041 .Washer 5,3x11112 586001 .Lock nut M5113 282727 .Cable harness 114 904428 .Cover, ingnition 115 385599 .Buzzer From 350021911

44

Control panel, From S/N: 35002610, 32, 54, 61-62, 79-

18188


SLG500-2EN2

45

Control panel, From S/N: 35002610, 32, 54, 61-62, 79-


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 Control panel, cpl 12 377303 .Control panel Up to 35003000, 02-101

378223 .Control panel. cpl From 35003001, 11-13 238158 D.Ignition switch 1

238236 D.Ignition key 14 791058 D.Diode lamp 25 904445 .Start protect mod. Up to 35003000, 02-1016 281457 D.Relay Up to 35003000, 02-1027 287599 D.Relay socket Up to 35003000, 02-1018 903903 .Screw Up to 35003000, 02-1059 615041 .Washer 5,3x11 Up to 35003000, 02-101

10 586001 .Lock nut M5 Up to 35003000, 02-10511 377301 .Cable harness Up to 35003000, 02-101

378225 .Cable harness From 35003001, 11112 904228 .Washer 6,4x12x1,5 Up to 35003000, 02-10113 385599 .Buzzer 114 376867 .Cover 115 904967 .Screw 216 928927 .Lock nut 217 791436 D.Decal "Charging" 118 791437 D.Decal "OIL PRESSURE" 119 385600 A Hour meter 1

A) Option

46

Battery and battery box

17696


SLG500-2EN2

47

Battery and battery box


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 281895 Isolation kit 12 .Isolation 13 .Isolation 14 .Isolation 15 .Isolation 16 281663-02 Battery box 17 281660-02 Cover 18 929200 Grommet 29 500018 Screw M8-1,25x12 8,84

10 904556 Washer 8,4x16x3,0411 500043 Screw M10x16H 8,8112 904557 Washer 10,5x22x4113 A Battery 1

A) See section engine

48

Handle and controls


SLG500-2EN2

49

Handle and controls


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Handle, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78 ( Page 50 )15 Handle, From S/N: 35002610, 32, 54, 61-62, 79- ( Page 52 )20 Option,dead man handle ( Page 54 )30 Throttle control ( Page 56 )

50

Handle, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78

16063-1


SLG500-2EN2

51

Handle, Up to S/N: 35002609, 11-31, 33-53, 55-60, 63-78


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 281505 Handle, cpl 12 282700-02 .Handle, lower 13 281506-02 .Handle 14 282706 A .Cover 15 500043 .Screw M10x16H 8,896 904230 .Washer 10,5x22x297 281804 D.Rubber stop 18 100900808 .Shock absorber 49 902379 B .Edge trim 1XL

10 100504231 .Stud 111 100900821 .Shock absorber 112 100505016 .Retainer, right 113 100505015 .Retainer, left 114 100504232 .Sleeve 215 900994 .Lock washer 216 581013 .Nut 217 100900822 .Retainer 218 500194 .Screw M12x40419 904703 .Washer 13x24x4820 586019 .Lock nut M12421 282724 Hook 122 281382 Ball knob M12, D= 50mm123 581012 Nut 124 904557 Washer 10,5x22x4225 281431 BShock absorber 126 570006 Nut M10127 500019 Screw M8-1,25x16 8,8828 904556 Washer 8,4x16x3,0829 281115 Screw 230 281116 Ryw-clips 231 281852 DOil drain, cpl 132 244059 DHose 133 926911 C Rubber strip 1XL34 629059 Spirol pin 2

A) Hatz manualB) L=165MMC) 220MM

52

Handle, From S/N: 35002610, 32, 54, 61-62, 79-

16063-1


SLG500-2EN2

53

Handle, From S/N: 35002610, 32, 54, 61-62, 79-


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 281505 Handle, cpl 12 282700-02 .Handle, lower 13 377310-02 .Handle 14 377312 A .Cover 15 500043 .Screw M10x16H 8,896 904230 .Washer 10,5x22x297 281804 D.Rubber stop 18 100900808 .Shock absorber 49 902379 B .Edge trim 1XL

10 100504231 .Stud 111 100900821 .Shock absorber 112 100505016 .Retainer, right 113 100505015 .Retainer, left 114 100504232 .Sleeve 215 900994 .Lock washer 216 581013 .Nut 217 100900822 .Retainer 218 500194 .Screw M12x40419 904703 .Washer 13x24x4820 586019 .Lock nut M12421 282724 Hook 122 281382 Ball knob M12, D= 50mm123 581012 Nut 124 904557 Washer 10,5x22x4225 281431 BShock absorber 126 570006 Nut M10127 500019 Screw M8-1,25x16 8,8828 904229 Washer 8,4x16x1,5829 281115 Screw 230 281116 Ryw-clips 231 281852 DOil drain, cpl 132 244059 DHose 133 926911 C Rubber strip 1XL34 629059 Spirol pin 2

A) Hatz manualB) L=165MMC) 220MM

54

Option,dead man handle

17124-1


SLG500-2EN2

55

Option,dead man handle


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 12 281639 .Plug 23 281635 .Hub 24 100505009 .Shaft 15 904231 .Washer 13x24x226 615007 .Washer 27 629053 .Spring pin 28 629038 .Expanding pin 39 100505011 .Retainer 1

10 280756 .Slide bearing 211 629047 .Spring pin 112 281299 .Lever 113 282152 B.Shock absorber 114 281392 .Stud 115 904229 .Washer 8,4x16x1,5116 500019 .Screw M8-1,25x16 8,8117 280764 .Lever 118 280842 .Link 119 381270 A .Control cable 120 570004 .Nut M6121 281391 B.Adjusting screw 122 921065 .Clamp 223 508001 .Screw 224 904228 .Washer 6,4x12x1,5225 516013 .Set screw 1

A) L=1200mm

56

Throttle control

16758


SLG500-2EN2

57

Throttle control


SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 380752 DThrottle control, cpl 12 455019 .Throttle handle 1

238443 ..Square nipple 13 380751 D.Control cable 14 904687 Screw 45 281228 Bracket 16 281236 Nipple 17 921065 Clamp 58 282707 Bracket 19 500040 Screw M6-1x20 8,83

10 600004 Washer 611 600006 Washer 212 570004 Nut M6313 508025 Screw 2

58

Decals and equipment


SLG500-2EN2

59



SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.10 Decals and equipment ( Page 60 )

60


17371


SLG500-2EN2

61



SLG500-2EN2

CodePart No.Ref. No. Qty DescriptionRem.1 281270 Sign plate 12 527002 Drive screw 43 281507 Decal LG50024 904096 Decal "DYNAPAC" L=420 mm25 904097 Decal "DYNAPAC" L=290 mm16 904680 Decal "Read instruction manual" 17 281898 Decal, ear protection 18 281269 Decal "LIFT" 29 284285 Decal 1

10 903832 Safety decal 111 Documentation 1

.Spare parts catalogue SLG5001

.Instruction book, engine 1

.Operation 1

.Warranty registration certificate 1

.Warranty conditions 112 791297 Decal "Sound power level" 109dB1

NI 1

Part Number Page Part Number Page Part Number Page

NUMERICAL INDEXDynapac Compaction Equipment ABSLG500-2EN2

100504231 5153

100504232 51

100505009 55100505011 55100505015 51

100505016 51

100505023 37100505042 37100900808 51

100900821 51

100900822 51

111022 19111178 29111180 33134056 29150008 33150012 33150015 29150020 19150033 19150035 19151008 19151019 33151023 29160110 39162011 19232143 19234481 37234622 37238158 43

45238236 43

238443 57239326 23239333 23239335 23239382 23239421 23239423 23239428 23239463 43239466 43239504 23239508 25239516 23239517 23239518 23239519 23239520 23239521 23239522 23239523 23239524 23239525 23239526 23239527 23239529 23239530 23239531 23239532 23239533 23239534 23239539 29239550 23239553 23239746 29239747 29239882 23239883 23

239886 23239887 23244059 25

280430 19280431 19280432 19280435 19280436 19280437 19280440 19280441 19280442 19280445 19280447 19280448 19280450 19280454 7

9280523 29280534 37280544 7

15280756 55280764 55280772 25280842 55280888 15281115 25

281116 25

281148 11281183 25281194 29

31281201 25281202 25281228 57281236 57281237 25281256 11281257 11281269 61281270 61281299 55281375 37281378 37281382 51

281391 55281392 55281431 51

281434 37281457 43

281466 37281475 7

281478-02 11281482-01 7

281484 7

281485 7

281488-02 11281490-01 7

281496 43281501 19281502 19281503 19

281505 51

281506-02 51281507 61281635 55281639 55281660-02 47281663-02 47281804 51

281852 25

281879 15281895 47281896 25281898 61281968 19282152 55282700-02 51

282704 7282705 7282706 51282707 57282714 7282718 19282724 51

282727 43283075 7284285 61286376 29287599 43

313003 37313041 37313108 37350029 19350036 29

350123 33376674 39376675 39376676 39376867 45377301 45377303 45377310-02 53377312 53378060 33378061 33378223 45378225 45379101 23379102 23380155 19380159 19380517 33380518 33380519 33380520 33380751 57380752 57381270 55381385 39381387 39381563 39381566 39381783 19381786 19381787 19381902 15381903 15382008 15382119 11

13

NI 2

Part Number

NUMERICAL INDEX

Page Part Number Page Part Number Page

Dynapac Compaction Equipment ABSLG500-2EN2

382811 23382812 23383038 39383039 39383353 39383400 37383403 37383458 37383562 37383755 37384012-02 11385599 43

385600 45386183 23386184 23386311 31386312 31386313 13386314-02 13386315-02 13386316 13386349 7386369 13386393 13386612 7386614-02 13386659 13387912 19389108 9421246 31455019 57480124 39500012 19500018 47500019 25

500021 13

500022 19

500025 37500026 37500028 7500029 13500035 7

500040 19

500043 47

500048 7

500051 7

500053 11500056 13500058 23500067 11500079 37500101 7

500133 15500161 15500194 51

508001 55508005 19

508025 19

508028 7

508036 7

508092 23508096 23516013 55527002 61535024 29570004 19

570005 25

570006 13

570007 15570008 7

581012 51

581013 51

586001 43

586019 15

586021 7

600004 57600006 57600009 15615007 55615041 43

615042 37615043 37615045 11615046 9615047 7

629038 55629047 55629053 55629059 51

747541 7

791058 45791145 37791234 13791297 61791436 45791437 45900994 51

901206 25902285 37902286 7

902287 15902379 51

902520 7

903821 37903832 61903903 43

904096 61904097 61904213 9

904228 19

904229 19

904230 15

904231 55904232 7904341 15904428 43904445 43

904556 11

904557 13

904558 7

904680 61904687 57904703 51

904811 19904960 39904967 45912481 29921065 55

923862 29924543 7

926911 51

928381 23928441 7

928786 19928787 19928788 19928789 19928791 19928794 19928795 19928796 19928797 19928798 19928849 25928893 19928894 19928927 45928944 19929200 47929355 29935426 29935427 29935608 23935609 23935610 23

NI 3

Part Number Page Part Number Page Part Number Page

NUMERICAL INDEXDynapac Compaction Equipment ABSLG500-2EN2

935611 23935612 23935736 29935752 23935753 23935942 23936595 37936922 23937428 23937873 23937924 37938163 37938278 23938724 31938725 31938726 31938727 31939355 31939356 31939357 31939359 31939360 31939361 31939362 31939363 31985012 43

Date post:	05-Feb-2017
Category:	Documents
Upload:	buikhuong
View:	383 times
Download:	7 times

DYNAPAC LG500

Documents