E-LED lighting catalogue 2015

E‐LED Lighting BV & Inc.European Office: Tel: +31 (0)346 28 62 62, Fax +31 (0) 346 28 70 67, E‐mail Info@E‐LEDLighting.com

United States Office: Tel: +1 (561) 845‐7460, Fax: +1 (561) 214‐4928, E‐mail Info@E‐LEDLighting.com



LED Floodlights operate efficiently and save power but also reduce maintenance and service costs as aresult of their long life. Conventional floodlights require frequent lamp replacement and routinely needservice during critical work periods. LED Floodlights will help save costs and increase efficiency byensuring that work will never be stopped due to missing, broken, or burned out bulbs.

Since LED Floodlights are not vibration sensitive nor do they have a light source that requires replacement,an extremely long life cycle is guaranteed. Additionally, LED Floodlights operate at a fraction of thetemperature that conventional floodlights do and, therefore, are much safer to work with.

Our Floodlights are manufactured using the newest and most up to date components available. The LEDFloodlights use ceramic base and chip technology. The drivers are rubber mounted to vibration resistanthousings. All fasteners, rings, and nuts, including the bracket, are made of high-quality marine grade A4316 stainless steel. Floodlights are available in a variety of wattages from 10-80 watts, the halogenequivalent of 50-700 watts.

A special ventilating gland is used in our manufacturing process to ensure that the air pressure inside theLED Floodlight housing will always be the same as the surrounding environment. This prevents fogging onboth the inside and outside of the glass due to temperature differences.

The attractive grey or white finish is achieved by using a double powder coat process, which eliminates thepotential for corrosion from harsh or saltwater environments. All gaskets are specially designed andmanufactured for use in harsh environments, and are saltwater, oil, and lubricant resistant.

The high quality components used in the construction of our LED Floodlights ensures a lifetime ofmaintenance free performance.

HIGH POWER LED LIGHTS

LED Flood Lights___




10 Watt LED Flood Light___

Grey or White Finish

Specifications:Art.No.: FL020201-LV to FL020212-HVLight Source: 1x 10 Watt Ceramic LEDPower Consumption: 10 WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 80°LED Colours: 3200K Warm White or 3900K Soft WhiteColour Rendering Index: >80 CRIOperating Voltage: 10V-30V/DC Low Power Version & AC85V~265V 50~60Hz High Power VersionMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65Affix Materials & mounting Bracket : A4 316 Stainless steelIP Rating: IP67Finish: Double Powder Coated Grey or WhiteDimensions: 114,5mm x 86 mm x 89mm (W x H x D) 4,55” x 3,4” x 3,5” (W x H x D)Certifications: CE Certificate Number: B-E09110908 EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 SAA Certified



PORTABLE / RECHARGEABLE

10 Watt LED Flood Light ___

Specifications:Art.No.: FL020222-CHLight Source: 1x 10 Watt Ceramic LEDPower Consumption: 10 WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 80°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: 120vac 50~60Hz and/or 240vac 56-60Hz and/or 12vdc vehicle accessory plugBattery: Lithium ionOperating Time on Battery: 4 hours on low light output and 3,5 hours on high light outputCharging Time: 1,5 hourSize: (W x L x H) 5.75” x 6.5” x 9.5” / 15mm x 17mm x 24mmMaterial Fixture: Aluminium: ZL102 Mn0.2 ~ 0.5 mg<=0.25, Si<=0.65Affix Materials & mounting Bracket : A2 304 Stainless steelIP Rating: IP65Finish: Powder Coated YellowCertifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 Class 2 Power Supply NEC ANSI/NFPA 70 UL1310

This portable, re-chargeable, 10 Watt LED Floodlight will give you up to 4 hours on a full charge, producing 1000 Lumens of light. The fixture is vibration and shock resistant and produces very little heat. The Floodlight comes complete with a 120Vac “wall” charger, a 240Vac “wall” charger and a 12Vdc car plug.






Specifications:Art.No.: FL030303-HV to FL030303-LVLight Source: 1x 30 Watt Ceramic LEDPower Consumption: 30 WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 50° or 100°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: 10V-30V/DC Low Power Version & AC100V~305V 50~60Hz High Power VersionMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65Affix Materials &mounting Bracket : A4 316 Stainless steelIP Rating: IP67Finish: Double Powder Coated Grey or WhiteDimensions: 225mm x 185mm x 135mm (W x H x D) 8,85” x 7,3” x 5,3” (W x H x D)Certifications: CE Certificate Number: B-E09110908 EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 SAA Certified






Specifications:Art.No.: FL050505-HV to FL050516-LVLight Source: 1x 50 Watt Ceramic LEDPower Consumption: 50 WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 50° or 100°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: 10V-30V/DC Low Power Version & AC100V~305V 50~60Hz High Power VersionMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65Affix Materials &mounting Bracket : A4 316 Stainless steelIP Rating: IP67Finish: Double Powder Coated Grey or WhiteDimensions: 290mm x 236mm x 160mm (W x H x D) 11,4” x 9,3” x 6,3” (W x H x D)Certifications: CE Certificate Number: B-E09110908 EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 SAA Certified






Specifications:Art.No.: FL070707-HV & FL070717-HVLight Source: 1x 80 Watt Ceramic LEDPower Consumption: 80 WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 80°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: AC100V~305V 50~60Hz High Power VersionMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65Affix Materials &mounting Bracket : A4 316 Stainless steelIP Rating: IP67Finish: Double Powder Coated Grey or WhiteDimensions: 285mm x 360mm x 115mm (W x H x D) 11,2” x 14,2” x 4,5” (W x H x D)Certifications: CE Certificate Number: B-E09110908 EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 SAA Certified



40 Watt LED

Flood / Canopy Light___

Specifications:Art.No.: FLEX-040-39GR-HVLight Source: 24pcs USA Bridgelux ChipPower Consumption: 40WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 80°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: AC90V~305V 50~60HzMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65Affix Material & Mounting Bracket: A4 316 Stainless SteelIP Rating: IP68 Highest Ingress Protection RatingFinish: Double Powder Coated Silver GreyDimensions: 200mm x 200mm x 130mm (W x H x D) 7.85’’ x 7.85’’ x 5.1’’ (W x H x D)Certifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 ATEX Explosion Proof Certified for Europe UL 1598 & UL 8750

The LED Flood/Canopy Light is available in a 40, 80 and 120Watt version. The light is made of high quality materials and uses a special reflector which prevent blinding when facing the light just of center. The lens is made of the high impact glass. The light is ATEX Ex explosion proof certified for Europe, manufactured to all CE standards and UL 1598 & UL 8750 certified for the United States. The high lumen output and the high color rendering index provides an excellent natural appearance.

Anti Explosive LED FixtureII 2G Ex eb mb IIA T4 GBIII 2D Ex tb IIIC T(95°) Db

Cert.No.: IEP 14 ATEX 0219

ATEX



80 Watt LED


Specifications:Art.No.: FLEX-080-39GR-HVLight Source: 60pcs USA Bridgelux ChipPower Consumption: 80WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 80°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: AC90V~305V 50~60HzMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65Affix Material & Mounting Bracket: A4 316 Stainless SteelIP Rating: IP68 Highest Ingress Protection RatingFinish: Double Powder Coated Silver GreyDimensions: 300mm x 300mm x 150mm (W x H x D) 11.8’’ x 11.8’’ x 5.9’’ (W x H x D)Certifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 ATEX Explosion Proof Certified for Europe UL 1598 & UL 8750




ATEX



120 Watt LED


Specifications:Art.No.: FLEX-120-39GR-HVLight Source: 96pcs USA Bridgelux ChipPower Consumption: 120WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 80°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: AC90V~305V 50~60HzMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65Affix Material & Mounting Bracket: 4 316 Stainless SteelIP Rating: IP68 Highest Ingress Protection RatingFinish: Double Powder Coated Silver GreyDimensions: 400mm x 400mm x 106mm (W x H x D) 15.8’’ x 15.8’’ x 6.3’’ (W x H x D)Certifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 ATEX Explosion Proof Certified for Europe UL 1598 & UL 8750




ATEX



30 & 70 Watt LED

LED Curved Tri-Proof Light___

Specifications:

Art.No.: CTPL-30W-39-60-HV & CTPL-70W-39-120-HV Light Source: SMD 30Watt (600mm, 2ft) or SMD 70Watt (1200mm, 4ft)Power Consumption: 30Watt or 70WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 230°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: AC85V~265V 50~60HzMaterial Fixture: Hard Anodized Aluminium, Polycarbonate & A4 316 Stainless Steel PartsIP Rating: IP65Certifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007 EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000 UL 1598 & UL 8750

The LED Curved Tri-Proof Light is designed to replace fluorescent fixtures in applications where long life and low power consumption are important considerations.· Available in 600mm, 2ft – 30Watt and 1200mm, 4ft – 70Watt· Large Beam Angle 230°· CRI/ Color Rendering Index of >80CRI provides excellent color rendering and natural light appearance· Long service life ensures low operating costs and reduces maintenance costs· Low profile fitting· High impact cover IK10



30 & 50 Watt LED

Round Tri-Proof LED Light___

Specifications:

Art.No.: RTPL-30W-39-60-HV & RTPL-50W-39-120-HVLight Source: 192pcs SMD 30Watt (600mm, 2ft) or 288pcs SMD 50Watt (1200mm, 4ft)Power Consumption: 30Watt or 50WattEfficiency: >90%Lumens Per Watt: 100 Lms./ WattBeam Angle: 180°LED Colours: 3900K Natural WhiteColour Rendering Index: >80 CRIOperating Voltage: AC85V~265V 50~60HzMaterial Fixture: PVCIP Rating: IP68Certifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007 EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000

The Round Tri-Proof LED Light is designed to replace fluorescent fixtures in applications where long life and low power consumption are important considerations.· Available in 600mm, 2ft – 30Watt and 1200mm, 4ft – 50Watt· Large Beam Angle 180°· CRI/ Color Rendering Index of >80CRI provides excellent color rendering and natural light appearance· Long service life ensures low operating costs and reduces maintenance costs· Low profile fitting



MULTI-PURPOSE LED UTILITY LIGHT

OCEANUS___

Specifications:Art.No.: MP010102-LV to MP020202-HV/LVLight Source: SMD 18WattPower Consumption: 18 WattEfficiency: >90%Lumens Per Watt: 80 Lms./ WattBeam Angle: 160°LED Colours: 3900K Natural White, 3900K Natural White + Red Circuit, 3900K Natural White + Blue Circuit 3900K Natural White + 3900K Natural White Back-Up CircuitColour Rendering Index: >80 CRIOperating Voltage: 10V-30V/DC Low Power Version & AC85V~265V 50~60Hz High Power VersionMaterial Fixture: Aluminium & PolycarbonateIP Rating: IP55Finish: WhiteExterior Dimensions: Surface Mount: 445mm x 175mm (17,5” x 6,9”) Flush Mount: 403mm x 142mm (15,9” x 5,6”)Installed Height Dimensions: 35mm (1,4”) 20mm (0,8”)Cut Out for Flush Mount: 370mm x 125mm (14,6” x 4,9”)Certifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007 EN 61000-3-2: 2006/A2: 2009 EN 61000-3-3: 2008 EN 61547: 1995+A1: 2000

The Oceanus LED utility light is designed to replace fluorescent fixtures in applications where long life and low power consumption are important considerations.

• 18Watts of power provides increased illumination without increasing power consumption.• LED Light output is available in the following configurations and voltages: Natural White 3900K 85-265VAC or 10-30VDC Natural White 3900K 85-265VAC Plus 3900K N.W. Emergency Circuit 10-30VDC. Natural White Plus a Small Red Circuit for Night Time Illumination in 85-265VAC or 10-30VDC Natural White Plus a Small Blue Circuit for Night Time Illumination in 85-265VAC or 10-30VDC• CRI – Color Rendering Index of >80CRI provides excellent color rendering and Natural Light appearance.• Long service life ensures low operating costs and reduces maintenance costs.• This utility light can be installed in either surface mount or flush mount configuration.



15, 21 & 30 Watt LED

Down Lights___

Specifications:Art.No.: RLDL-15-39WH-HV, RLDL-21-39WH-HV & RLDL-30-39WH-HVLight Source: 1piece Sharp COB LED 15, 21 or 30WattPower Consumption: 15Watt, 21Watt or 30WattEfficiency: >95%Lumens Per Watt: 100 Lms./ WattBeam Angle: 140°LED Colours: 3900K Natural WhiteColour Rendering Index: >85 CRIOperating Voltage: AC85V~265V 50~60Hz High Power VersionMaterial Fixture: Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65IP Rating: IP44Finish: Powder Coated WhiteMounting: Spring clip Dimensions: Ø140 x 80mm 15Watt, Ø190 x 80mm 21Watt, Ø230 x 80mm 30Watt Ø5,5” x 3,2” 15Watt, Ø7,5” x 3,2” 21Watt and Ø9” x 3,2” 30WattCertifications: EMC Directive 204/108/EC EN 55015: 2006+A1: 2007, EN 61000-3-2: 2006/A2: 2009; EN 61000-3-3: 2008; EN 61547: 1995+A1: 2000

The Recessed LED Down Light is designed to replace PLC Down Lights in applications where long life and low power consumption are important considerations.· Available in 15, 21 and 30Watt· Beam Angle 140°· Easy installation with spring clips· CRI Natural Light – Color Rendering Index of >85CRI provides excellent color rendering and Natural Light appearance· Long service life ensures low operating costs and reduces maintenance costs.

Date post:	15-Mar-2016
Category:	Documents
Upload:	marcel-boshuizen
View:	244 times
Download:	6 times

E-LED lighting catalogue 2015

Documents