AttestationE1-221
Herewith it is confirmed that in the first half of 2017 a regular supervision of the product
Birch plywood EN 636-2
plywood, birch, phenolic-formaldehyde (PF), unfacedtechnical class: DIBt 100, E1
in the thickness range: 12 mm ≤ 25 mm
manufactured by
A/S Latvijas Finierismill "Lignums"Finiera iela 6
1016 RigaLatvia
was carried out by the approved supervision body (NDS08)
Fraunhofer-Institute for Wood Research
Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany
according to supervision contract no. 0221 dated 11 April 1996. It was found that the requirements on personal and equipment aresuitable to produce the product in an adequate way and the factory production control meets the requirements of the “Regulationon the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline 100)” datedJune 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuous externalsupervision of factory production control shall take place twice a year.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying BodyBraunschweig, 17 October 2017
AttestationE1-265
Herewith it is confirmed that in the first half of 2017 a regular supervision of the product
Birch plywood EN 636-2
plywood, birch, phenolic-formaldehyde (PF), unfacedtechnical class: DIBt 100, E1
in the thickness range: > 12 mm ≤ 25 mm
manufactured by
A/S Latvijas Finierismill "Furniers"Bauskas iela 59
1004 RigaLatvia
was carried out by the approved supervision body (NDS08)
Fraunhofer-Institute for Wood Research
Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany
according to supervision contract no. 0265 dated 26 February 1999. It was found that the requirements on personal and equipmentare suitable to produce the product in an adequate way and the factory production control meets the requirements of the“Regulation on the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline100)” dated June 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuousexternal supervision of factory production control shall take place twice a year.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying BodyBraunschweig, 17 October 2017
AttestationE1-501
Herewith it is confirmed that in the first half of 2017 a regular supervision of the product
Birch plywood EN 636-2
plywood, birch, phenolic-formaldehyde (PF), unfacedtechnical class: EN 636-2; DIBt 100, E1
in the thickness range: 12 mm ≤ 25 mm
manufactured by
A/S Latvijas Finierismill "Verems"
Lejas Ancupani 4604 Veremu parish
Latvia
was carried out by the approved supervision body (NDS08)
Fraunhofer-Institute for Wood Research
Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany
according to supervision contract no. 0501 dated 12 June 2006. It was found that the requirements on personal and equipment aresuitable to produce the product in an adequate way and the factory production control meets the requirements of the “Regulationon the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline 100)” datedJune 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuous externalsupervision of factory production control shall take place twice a year.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying BodyBraunschweig, 17 October 2017
AttestationE1-581
Herewith it is confirmed that in the first half of 2017 a regular supervision of the product
Birch Plywood EN 636-1
plywood, birch, melamine-urea-formaldehyde (MUF), unfacedtechnical class: EN 636-1; DIBt 100, E1
in the thickness range: > 12 mm ≤ 25 mm
manufactured by
A/S Latvijas Finierismill "Lignums"Finiera iela 6
1016 RigaLatvia
was carried out by the approved supervision body (NDS08)
Fraunhofer-Institute for Wood Research
Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany
according to supervision contract no. 0581 dated 20 August 2013. It was found that the requirements on personal and equipmentare suitable to produce the product in an adequate way and the factory production control meets the requirements of the“Regulation on the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline100)” dated June 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuousexternal supervision of factory production control shall take place twice a year.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying BodyBraunschweig, 17 October 2017
AttestationE1-580
Herewith it is confirmed that in the first half of 2017 a regular supervision of the product
Birch Plywood EN 636-1
plywood, birch, melamine-urea-formaldehyde (MUF), unfacedtechnical class: EN 636-1, DIBt 100, E1
in the thickness range: > 12 mm ≤ 25 mm
manufactured by
A/S Latvijas Finierismill "Furniers"Bauskas iela 59
1004 RigaLatvia
was carried out by the approved supervision body (NDS08)
Fraunhofer-Institute for Wood Research
Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany
according to supervision contract no. 0580 dated 20 August 2013. It was found that the requirements on personal and equipmentare suitable to produce the product in an adequate way and the factory production control meets the requirements of the“Regulation on the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline100)” dated June 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuousexternal supervision of factory production control shall take place twice a year.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying BodyBraunschweig, 17 October 2017