Date post: | 29-Jul-2018 |
Category: |
Documents |
Upload: | duongxuyen |
View: | 216 times |
Download: | 0 times |
Datasheet
2.8m
7m
This range of surface mounted PIR presence detectors is perfect for simple attachment when flush mounting is not possible.
Key Product Features:
● Self contained unit● Easy to install via back plate● Infrared programmable via our UHS5 and UNLCDHS handsets● IP40 (no gasket); IP54 when fi tted with gasket.
Dimensions (mm)
Detection pattern high sensitivity low
EBDSM | Compact surface mounted detector
94 50
EBDSM Datasheet Issue 1 – Page 1 of 2
Fans & ventilation equipment
Resistive heaters
LED lighting
Compact fl uorescent lighting
Fluorescent lighting
Incandescent lighting
Maximum loads
Time out range
Compliance
Insulation class
Material (casing)
Humidity
Working temperature range OC
Terminal capacity
Power consumption parasitic
Supply frequency
Supply voltage AC
Weight
Device/ballast control
IP rating
Control method
Technical Data
Part Code
10A
10A
10A
10A
10A
10A
10s–99m
EMC-2004/108/EC LVD-2006/95/EC
Class 2
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 35
2.5mm²
895mW
50Hz
230VAC+/-10%
0.15kg
–
IP40 without gasket; IP54 with gasket
PRM switching
EBDSM-PRM
10A
10A
10A
10A
10A
10A
10s–99m
EMC-2004/108/EC LVD-2006/95/EC
Class 2
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 35
2.5mm²
807mW
50Hz
230VAC+/-10%
0.15kg
up to 20 drivers/ballasts
IP40 without gasket; IP54 with gasket
DALI/DSI digital dimming
EBDSM-DD
10A
10A
10A
10A
10A
10A
10s–99m
EMC-2004/108/EC LVD-2006/95/EC
Class 2
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 35
2.5mm²
260mW
50Hz
230VAC+/-10%
0.15kg
up to 10 drivers/ballasts
IP40 without gasket; IP54 with gasket
1–10V analogue dimming
EBDSM-AD
15824
EBDSM Datasheet Issue 1 – Page 2 of 2
CP ElectronicsA Business unit of Legrand Electric Limited,Brent Crescent, London NW10 7XR, UK+44 (0)333 900 [email protected]
Important notice:
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and the applicable Building Regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specifi cation of this product without prior notice.
www.cpelectronics.co.uk connect with us