EHRLE attributes High pressure cleaner characteristics Triplex-Piston-Pump Ceramic pump plunger, Stainless Steel pump valves and brass pump-head for long durability. High-Pressure Chemical with Dosing-Valve Any cleaning-detergents can be applied during high-pressure stage by opening the Dosing-Valve. The High-Pressure Pump will absorb detergents together with water and pressurize it. Water-Break Tank for Separation No additional check unit Valve necessary – Machines conforms to Water-Board Re- gulations. 30% increased Cleaning-Power due to no Chemical-Injector. Water-Break Tank help to protects pump from water starvation. TSS-System with pump off delay During breaks longer than 90 seconds, the unit switches automatically to stand-by position. After opening the trigger-gun again, the unit is immediately ready for operation. The durability of the High-Pres- sure Pump is also higher. Information on recommended daily time of use. Patent Wheel-Brake (requirement by Law) with large rubber- wheels – no small castors. (Optional) This professional Hose-Reel with stainless steel shaft is equipped with a folding handle doubling as a reel-brake. Up to 40m of High-Pressure Hose on the hose-re- el ensure a wide action radius and easy storage. Total Switch off after 20min In case the Unit is not used in the stand-by mode for more than 20min it will switch off itself. The Unit can be re-started at the On/Off Switch for normal operation. Optical Flame-Monitor on all High-Pressure Cleaners of Series ETRONIC II and static Units in order to comply with legal requirements. (Option) Water-Break Tank All EHRLE High-Pressure Cleaners are equipped with slow-running, air-cooled and 4-pole electric Motors. Leckage Recognition In the event of leaking parts in the High-Pressure Cleaner, or any Gun or Hose leaking, the Unit shuts itself down. The quick-coupling system by using the EHRLE QC315 quick-coupling system Accessories, Guns, Lances and Nozzles can be changed without the use of Tools. The EHRLE QC315 Guns incorpo- rate an anti-twist Swivel for Hoses. 3 2 1 H2O Air Luft H2O Air Luft EHRLE horizontal-heatcoil with 3-pass System. Highest Efficiency – with environmentally fri- endly low Emmissions! No additional insulation required – cold air is used to cool the Boiler. Separate Burner-Motor for professional use, ensures increased reliabilty.
Triplex-Piston-PumpCeramic pump plunger, Stainless Steel pump valves and brass pump-head for long durability.
High-Pressure Chemical with Dosing-Valve Any cleaning-detergents can be applied during high-pressure stage by opening the Dosing-Valve. The High-Pressure Pump will absorb detergents together with water and pressurize it.
Water-Break Tank for SeparationNo additional check unit Valve necessary – Machines conforms to Water-Board Re-gulations. 30% increased Cleaning-Power due to no Chemical-Injector.Water-Break Tank help to protects pump from water starvation.
TSS-System with pump off delayDuring breaks longer than 90 seconds, the unit switches automatically to stand-by position. After opening the trigger-gun again, the unit is immediately ready for operation. The durability of the High-Pres-sure Pump is also higher.
Information on recommended daily time of use.
Patent Wheel-Brake (requirement by Law) with large rubber-wheels – no small castors.
(Optional)This professional Hose-Reel with stainless steel shaft is equipped with a folding handle doubling as a reel-brake. Up to 40m of High-Pressure Hose on the hose-re-el ensure a wide action radius and easy storage.
Total Switch off after 20minIn case the Unit is not used in the stand-by mode for more than 20min it will switch off itself. The Unit can be re-started at the On/Off Switch for normal operation.
Optical Flame-Monitor on all High-Pressure Cleaners of Series ETRONIC II and static Units in order to comply with legal requirements.
(Option) Water-Break Tank
All EHRLE High-Pressure Cleaners are equipped with slow-running, air-cooled and 4-pole electric Motors.
Leckage RecognitionIn the event of leaking parts in the High-Pressure Cleaner, or any Gun or Hose leaking, the Unit shuts itself down.
The quick-coupling system by using the EHRLE QC315 quick-coupling system Accessories, Guns, Lances and Nozzles can be changed without the use of Tools. The EHRLE QC315 Guns incorpo-rate an anti-twist Swivel for Hoses.
3
2
1
H2OAir
Luft
H2O
AirLuft
EHRLE horizontal-heatcoil with 3-pass System. Highest Efficiency – with environmentally fri-endly low Emmissions! No additional insulation required – cold air is used to cool the Boiler. Separate Burner-Motor for professional use, ensures increased reliabilty.
High pressure cleanerCold water, mobile/ stationary - series 1x1KD223 UK
High Pressure CleanerCold water, mobile - Series 1x1
KD223 UK
KD323 UK
Type KD223 UK-StandardVoltage 1/N/PE/AC/50Hz/240V ► 10m HP-Hose DN06 - 250bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w vario nozzle ► Stainless-Steel Jet-Nozzle 25° ► Detergent-Supply c/w Low-Pressure ► Injector and metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 200 - 500l/hNozzle size 030Max. Inlet temperature 45°CPump speed 2800rpmConnected load 2,5kW / 10,0AElectrical protection 13A slow-blowingWeight net / with package 16,8 kg / 21 kgDimensions of product / with package (LxWxH) 460 x 280 x 260 mm / 500 x 300 x 420 mm
Self-Supporting, robust, impact-Resistant device-cover made of ABS, Triplex-Piston pump with brass pump head, High-Perfor-mance ceramic piston, Stainless-Steel valves, Start-Stop system, Unloader Safety-Valve c/w infi nitely variable pressure and quan-tity regulation, 3-point pedestal, rubber-coated with bayonet quick-change device for wall brackets and trolly, Rotary On-Off switch, 5,0m connection cable
Art. No. 111225Retail price plus VAT £ 781.00
Type KD323 UK-StandardVoltage 1/N/PE/AC/50Hz/240V ► 10m HP-Hose DN06 - 250bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w vario nozzle ► Stainless-Steel Jet-Nozzle 25° ► Detergent-Supply c/w Low-Pressure ► Injector and metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 250 - 600l/hNozzle size 045Max. Inlet temperature 45°CPump speed 2800rpmConnected load 2,9kW / 12,5AElectrical protection 13A slow-blowingWeight net / with package 18,6 kg / 22,6 kgDimensions of product / with package (LxWxH) 460 x 280 x 260 mm / 500 x 300 x 420 mm
Self-Supporting, robust, impact-Resistant device-cover made of ABS, Triplex-Piston pump with brass pump head, High-Perfor-mance ceramic piston, Stainless-Steel valves, Start-Stop system, Unloader Safety-Valve c/w infi nitely variable pressure and quan-tity regulation, 3-point pedestal, rubber-coated with bayonet quick-change device for wall brackets and trolly, Rotary On-Off switch, 5,0m connection cable
Art. No. 111423Retail price plus VAT £ 824.00
4
High pressure cleanerCold water, mobile - series 1x1KD323 UKHigh Pressure CleanerCold water, mobile - Series 1x1
KD223 UK
KD323 UK
Type KD223 UK-StandardVoltage 1/N/PE/AC/50Hz/240V ► 10m HP-Hose DN06 - 250bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w vario nozzle ► Stainless-Steel Jet-Nozzle 25° ► Detergent-Supply c/w Low-Pressure ► Injector and metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 200 - 500l/hNozzle size 030Max. Inlet temperature 45°CPump speed 2800rpmConnected load 2,5kW / 10,0AElectrical protection 13A slow-blowingWeight net / with package 16,8 kg / 21 kgDimensions of product / with package (LxWxH) 460 x 280 x 260 mm / 500 x 300 x 420 mm
Self-Supporting, robust, impact-Resistant device-cover made of ABS, Triplex-Piston pump with brass pump head, High-Perfor-mance ceramic piston, Stainless-Steel valves, Start-Stop system, Unloader Safety-Valve c/w infi nitely variable pressure and quan-tity regulation, 3-point pedestal, rubber-coated with bayonet quick-change device for wall brackets and trolly, Rotary On-Off switch, 5,0m connection cable
Art. No. 111225Retail price plus VAT £ 781.00
Type KD323 UK-StandardVoltage 1/N/PE/AC/50Hz/240V ► 10m HP-Hose DN06 - 250bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w vario nozzle ► Stainless-Steel Jet-Nozzle 25° ► Detergent-Supply c/w Low-Pressure ► Injector and metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 250 - 600l/hNozzle size 045Max. Inlet temperature 45°CPump speed 2800rpmConnected load 2,9kW / 12,5AElectrical protection 13A slow-blowingWeight net / with package 18,6 kg / 22,6 kgDimensions of product / with package (LxWxH) 460 x 280 x 260 mm / 500 x 300 x 420 mm
Self-Supporting, robust, impact-Resistant device-cover made of ABS, Triplex-Piston pump with brass pump head, High-Perfor-mance ceramic piston, Stainless-Steel valves, Start-Stop system, Unloader Safety-Valve c/w infi nitely variable pressure and quan-tity regulation, 3-point pedestal, rubber-coated with bayonet quick-change device for wall brackets and trolly, Rotary On-Off switch, 5,0m connection cable
Art. No. 111423Retail price plus VAT £ 824.00
4
High pressure cleanerCold water, mobile - series 2x2KD523 UK
High Pressure CleanerCold water, mobile - Series 2x2
Operating pressure 30 -130bar/ 3-13MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 600l/hNozzle size 040Max. Inlet temperature 45°CPump speed 1400rpmConnected load 2,6kW / 9,0AElectrical protection 13A slow-blowingWeight net / with package 34 kg / 38 kg 36 kg / 40 kgDimensions device / with package (LxWxH) 380 x 380 x 900 mm/ 800 x 400 x 580 mm 390 x 380 x 900 mm/ 800 x 400 x 580 mm
Self-Supporting, robust, impact-Resistant device-cover made of ABS, Triplex-Piston pump with brass pump head, High-Per-formance ceramic piston, Stainless-Steel valves, Start-Stop system, Unloader Safety-Valve c/w infi nitely variable pressure and quantity regulation, 2 large wheels and rubber support, Storage possibility for all accessories, Robust On-Off switch, 5,0m connection cable
Art. No. 202525 212524
Retail price plus VAT £ 1,187.00 £ 1,375.00
6
High pressure cleanerCold water, mobile - series 3x3KD623 UK
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 17l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-135bar/ 3-13,5MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 600 l/hNozzle size 040Max. Inlet temperature 45°CPump speed 1400rpmConnected load 2,9kW / 11,4AElectrical protection 13A slow-blowingWeight net / with package 46 kg / 74 kg 50 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 635 x 1080 x 1060 mm 805 x 485 x 950 mm / 635 x 1080 x 1060 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 17l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/
wMetering-valve
Operating pressure 30-125bar/ 3-12,5MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Max. Inlet temperature 45°CPump speed 1400rpmConnected load 3,1kW / 12,3AElectrical protection 13A slow-blowingWeight net / with package 51,8 kg / 74 kg 55,8 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 635 x 1080 x 1060 mm 805 x 485 x 950 mm / 635 x 1080 x 1060 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar
Art. No. 562003 562004
Retail price plus VAT £ 1,532.00 £ 1,896.00
7
High Pressure CleanerCold water, mobile - Series 3x3
KD623 UK
KD823 UK
High pressure cleanerCold water, mobile - series 3x3KD823 UK
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 17l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-135bar/ 3-13,5MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 600 l/hNozzle size 040Max. Inlet temperature 45°CPump speed 1400rpmConnected load 2,9kW / 11,4AElectrical protection 13A slow-blowingWeight net / with package 46 kg / 74 kg 50 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 635 x 1080 x 1060 mm 805 x 485 x 950 mm / 635 x 1080 x 1060 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 17l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/
wMetering-valve
Operating pressure 30-125bar/ 3-12,5MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Max. Inlet temperature 45°CPump speed 1400rpmConnected load 3,1kW / 12,3AElectrical protection 13A slow-blowingWeight net / with package 51,8 kg / 74 kg 55,8 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 635 x 1080 x 1060 mm 805 x 485 x 950 mm / 635 x 1080 x 1060 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar
Art. No. 562003 562004
Retail price plus VAT £ 1,532.00 £ 1,896.00
7
High Pressure CleanerCold water, mobile - Series 3x3
KD623 UK
KD823 UK
High pressure cleanerCold water, mobile - series 3x3KD940
High Pressure CleanerCold water, mobile - Series 3x3
KD940-FFood progressingwith stainless steel pump, hot water resistant
Type KD940-Standard KD940-PremiumVoltage 1/N/PE/AC/50Hz/240V ► 10m HP-Hose DN08 - 315bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Vario-
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 17l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-190bar/ 3-19MPaMax. pressure 210bar/ 21MPaDischarge capacity 300 - 840l/hNozzle size 045Max. Inlet temperature 45°CPump speed 1400rpmConnected load 5,2kW / 9,1AElectrical protection 3x16A slow-blowingWeight net / with package 54 kg / 73 kg 58 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 635 x 1080 x 1060 mm 805 x 485 x 950 mm / 635 x 1080 x 1060 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar
► Hose-Reel ► 15m HP-Hose DN08 - 315bar blue ► Trigger-Gun with swivel ► Double Spray-Lance 900 mm c/w
nozzle protection ► High and low pressure jet nozzle 25° ► Soft Foam Kit with 2 l foam deter-
gent tank ► 17l Water-Storage tank ► Water-Supply separation acc. water
reg. Chemical supply in high-pres-sure Jet c/w Metering-valve
Operating pressure 30-130bar / 3-13MPaMax. pressure 150bar / 15MPaDischarge capacity 300 - 840l/hNozzle size 060Max. Inlet temperature 80°CPump speed 1400rpmConnected load 4,5kW / 8,1AElectrical protection 3x16A slow-blowingWeight net / with package 54 kg / 74 kg 58 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 790 x 595 x 810 mm 830 x 485 x 950 mm / 790 x 595 x 810 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, triplex-piston pump with chrome, ni-ckel plated pump head (hot water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar stainless steel
High pressure cleanerCold water, mobile - series 3x3 food versionKD940-F - with stainless steel pump, hot water resistantHigh Pressure CleanerCold water, mobile - Series 3x3
KD940-FFood progressingwith stainless steel pump, hot water resistant
Type KD940-Standard KD940-PremiumVoltage 1/N/PE/AC/50Hz/240V ► 10m HP-Hose DN08 - 315bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Vario-
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 17l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-190bar/ 3-19MPaMax. pressure 210bar/ 21MPaDischarge capacity 300 - 840l/hNozzle size 045Max. Inlet temperature 45°CPump speed 1400rpmConnected load 5,2kW / 9,1AElectrical protection 3x16A slow-blowingWeight net / with package 54 kg / 73 kg 58 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 635 x 1080 x 1060 mm 805 x 485 x 950 mm / 635 x 1080 x 1060 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar
► Hose-Reel ► 15m HP-Hose DN08 - 315bar blue ► Trigger-Gun with swivel ► Double Spray-Lance 900 mm c/w
nozzle protection ► High and low pressure jet nozzle 25° ► Soft Foam Kit with 2 l foam deter-
gent tank ► 17l Water-Storage tank ► Water-Supply separation acc. water
reg. Chemical supply in high-pres-sure Jet c/w Metering-valve
Operating pressure 30-130bar / 3-13MPaMax. pressure 150bar / 15MPaDischarge capacity 300 - 840l/hNozzle size 060Max. Inlet temperature 80°CPump speed 1400rpmConnected load 4,5kW / 8,1AElectrical protection 3x16A slow-blowingWeight net / with package 54 kg / 74 kg 58 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 790 x 595 x 810 mm 830 x 485 x 950 mm / 790 x 595 x 810 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, triplex-piston pump with chrome, ni-ckel plated pump head (hot water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar stainless steel
► Hose-Reel ► 15m HP-Hose DN08 - 315bar blue ► Trigger-Gun with swivel ► Double Spray-Lance 900 mm c/w
nozzle protection ► High and low pressure jet nozzle 25° ► Soft Foam Kit with 2 l foam deter-
gent tank ► 17l Water-Storage tank ► Water-Supply separation acc. water
reg. Chemical supply in high-pres-sure Jet c/w Metering-valve
Operating pressure 30-100bar / 3-10MPaMax. pressure 120bar / 12MPaDischarge capacity 300 - 840l/hNozzle size 070Max. Inlet temperature 80°CPump speed 1400rpmConnected load 3,1kW / 13AElectrical protection 13A slow-blowingWeight net / with package 54 kg / 74 kg 58 kg / 78 kgDimensions device / with package (LxWxH) 805 x 485 x 950 mm / 790 x 595 x 810 mm 830 x 485 x 950 mm / 790 x 595 x 810 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, triplex-piston pump with chrome, ni-ckel plated pump head (hot water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain with rubber stand, storage possibility for all accessories, robust rotary on-off switch, 5,0m connection cable, removable ergonomic drawbar stainless steel
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-250bar/ 3-25MPaMax. pressure 270bar/ 27MPaDischarge capacity 300 - 1.000l/hNozzle size 045Max. Inlet temperature 45°CPump speed 1400rpmConnected load 7,4kW / 13,1AElectrical protection 3x16A slow-blowingWeight net / with package 89 kg / 113kg 97 kg / 121 kgDimensions device / with package (LxWxH) 980 x 620 x 1000 mm / 1050 x 760 x 1180 mm 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-170bar/ 3-17MPaMax. pressure 190bar/ 19MPaDischarge capacity 300 - 1.300l/hNozzle size 070Max. Inlet temperature 45°CPump speed 1400rpmConnected load 7,4kW / 13,1AElectrical protection 3x16A slow-blowingWeight net / with package 89 kg / 113 kg 97 kg / 121 kgDimensions device / with package (LxWxH) 980 x 620 x 1000 mm / 1050 x 760 x 1180 mm 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-250bar/ 3-25MPaMax. pressure 270bar/ 27MPaDischarge capacity 300 - 1.000l/hNozzle size 045Max. Inlet temperature 45°CPump speed 1400rpmConnected load 7,4kW / 13,1AElectrical protection 3x16A slow-blowingWeight net / with package 89 kg / 113kg 97 kg / 121 kgDimensions device / with package (LxWxH) 980 x 620 x 1000 mm / 1050 x 760 x 1180 mm 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-170bar/ 3-17MPaMax. pressure 190bar/ 19MPaDischarge capacity 300 - 1.300l/hNozzle size 070Max. Inlet temperature 45°CPump speed 1400rpmConnected load 7,4kW / 13,1AElectrical protection 3x16A slow-blowingWeight net / with package 89 kg / 113 kg 97 kg / 121 kgDimensions device / with package (LxWxH) 980 x 620 x 1000 mm / 1050 x 760 x 1180 mm 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
High pressure cleanerCold water, mobile - series 4x4KD1840
High Pressure CleanerCold water, mobile - Series 4x4
KD1540
KD1840
Type KD1840-PremiumVoltage 3/PE/AC/50Hz/415V ► Hose-Reel
► 20m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 1.800l/hNozzle size 150Max. Inlet temperature 45°CPump speed 1400rpmConnected load 7,4kW / 13,1AElectrical protection 3x16A slow-blowingWeight net / with package 105 kg / 129 kgDimensions device / with package (LxWxH) 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 563004Retail price plus VAT £ 3,546.00
Type KD1540-PremiumVoltage 3/PE/AC/50Hz/415V ► Hose-Reel
► 20m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-280bar/ 3-28MPaMax. pressure 310bar/ 31MPaDischarge capacity 300 - 1.500l/hNozzle size 070Max. Inlet temperature 45°CPump speed 1400rpmConnected load 13,8kW / 24AElectrical protection 3x32A slow-blowingWeight net / with package 127 kg / 151 kgDimensions device / with package (LxWxH) 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 553004Retail price plus VAT £ 4,706.00
11
High pressure cleanerCold water, mobile - series 4x4KD1540 High Pressure CleanerCold water, mobile - Series 4x4
KD1540
KD1840
Type KD1840-PremiumVoltage 3/PE/AC/50Hz/415V ► Hose-Reel
► 20m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 1.800l/hNozzle size 150Max. Inlet temperature 45°CPump speed 1400rpmConnected load 7,4kW / 13,1AElectrical protection 3x16A slow-blowingWeight net / with package 105 kg / 129 kgDimensions device / with package (LxWxH) 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 563004Retail price plus VAT £ 3,546.00
Type KD1540-PremiumVoltage 3/PE/AC/50Hz/415V ► Hose-Reel
► 20m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-280bar/ 3-28MPaMax. pressure 310bar/ 31MPaDischarge capacity 300 - 1.500l/hNozzle size 070Max. Inlet temperature 45°CPump speed 1400rpmConnected load 13,8kW / 24AElectrical protection 3x32A slow-blowingWeight net / with package 127 kg / 151 kgDimensions device / with package (LxWxH) 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 553004Retail price plus VAT £ 4,706.00
11
High pressure cleanerCold water, mobile - series 4x4KD2040
KD1140-FFood progressingwith stainless steel pump, hot water resistant
High Pressure CleanerCold water, mobile - Series 4x4
KD2040
Type KD2040-PremiumVoltage 3/PE/AC/50Hz/415V ► Hose-Reel
► 20m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-220bar/ 3-22MPaMax. pressure 240bar/ 24MPaDischarge capacity 300 - 1.800l/hNozzle size 100Max. Inlet temperature 45°CPump speed 1400rpmConnected load 13,8kW / 24AElectrical protection 3x30A slow-blowingWeight net / with package 131 kg / 155 kgDimensions device / with package (LxWxH) 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 554004Retail price plus VAT £ 4,633.00
Type KD1140-F-Standard KD1140-F-PremiumVoltage 3/PE/AC/50Hz/415V ► 10m HP-Hose DN08 - 315bar blue
► Trigger-Gun with swivel ► Double Spray-Lance 900 mm c/w
► Hose-Reel ► 20m HP-Hose DN08 - 315bar blue ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle-
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar / 3-18MPaMax. pressure 200bar / 20 MpaDischarge capacity 300 - 1.000l/hNozzle size 055Max. Inlet temperature 80°CPump speed 1400rpmConnected load 6,9kW / 12,5AElectrical protection 3x16A slow-blowingWeight net / with package 89 kg / 113kg 97 kg / 121 kgDimensions device / with package (LxWxH) 980 x 620 x 1000 mm / 1050 x 760 x 1180 mm 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, triplex-piston pump with chrome, ni-ckel plated pump head (hot water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar stainless steel
High pressure cleanerCold water, mobile - series 4x4 food versionKD1140-F - with stainless steel pump, hot water resistant
KD1140-FFood progressingwith stainless steel pump, hot water resistant
High Pressure CleanerCold water, mobile - Series 4x4
KD2040
Type KD2040-PremiumVoltage 3/PE/AC/50Hz/415V ► Hose-Reel
► 20m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-220bar/ 3-22MPaMax. pressure 240bar/ 24MPaDischarge capacity 300 - 1.800l/hNozzle size 100Max. Inlet temperature 45°CPump speed 1400rpmConnected load 13,8kW / 24AElectrical protection 3x30A slow-blowingWeight net / with package 131 kg / 155 kgDimensions device / with package (LxWxH) 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Self-supporting, robust, rotation-moulded device-chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel-plated, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 2 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust ro-tary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 554004Retail price plus VAT £ 4,633.00
Type KD1140-F-Standard KD1140-F-PremiumVoltage 3/PE/AC/50Hz/415V ► 10m HP-Hose DN08 - 315bar blue
► Trigger-Gun with swivel ► Double Spray-Lance 900 mm c/w
► Hose-Reel ► 20m HP-Hose DN08 - 315bar blue ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle-
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► 35l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar / 3-18MPaMax. pressure 200bar / 20 MpaDischarge capacity 300 - 1.000l/hNozzle size 055Max. Inlet temperature 80°CPump speed 1400rpmConnected load 6,9kW / 12,5AElectrical protection 3x16A slow-blowingWeight net / with package 89 kg / 113kg 97 kg / 121 kgDimensions device / with package (LxWxH) 980 x 620 x 1000 mm / 1050 x 760 x 1180 mm 1020 x 620 x 1000 mm / 1050 x 760 x 1180 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, triplex-piston pump with chrome, ni-ckel plated pump head (hot water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar stainless steel
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Max. Inlet temperature 45°CPump speed 1400rpmConnected load 13PS HondaElectric-Starter OptionWeight net / with package 94 kg / 107 kg 102 kg / 115 kgDimensions device / with package (LxWxH) 1000 x 740 x 770 mm / 1200 x 800 x 900 mm 1000 x 740 x 970 mm / 1200 x 800 x 1250 mm
Robust, corrosion-resistant, self-supporting device chassis, with tilt-proof equipment buggy, made of robust steel pipe galvanized and powder-coated, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leaka-ge-return, gearbox for reducing the high-pressure pump speed, 2-fold safety system, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation and safety-valve, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, external detergent supply
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Max. Inlet temperature 45°CPump speed 1400rpmConnected load 13PS HondaElectric-Starter OptionWeight net / with package 94 kg / 107 kg 102 kg / 115 kgDimensions device / with package (LxWxH) 1000 x 740 x 770 mm / 1200 x 800 x 900 mm 1000 x 740 x 970 mm / 1200 x 800 x 1250 mm
Robust, corrosion-resistant, self-supporting device chassis, with tilt-proof equipment buggy, made of robust steel pipe galvanized and powder-coated, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leaka-ge-return, gearbox for reducing the high-pressure pump speed, 2-fold safety system, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation and safety-valve, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, external detergent supply
Operating pressure 30-280bar/ 3-28MPaMax. pressure 300bar/ 30MPaDischarge capacity 300 - 1000l/hNozzle size 035Max. Inlet temperature 45°CPump speed 1400rpmConnected load 18h.p. B&S 2-CylinderElectric-Starter OptionWeight net / with package 96 kg / 103 kg 111 kg / 124 kgDimensions device / with package (LxWxH) 1000 x 740 x 770 mm / 1200 x 800 x 900 mm 1000 x 740 x 970 mm / 1200 x 800 x 1250 mm
Robust, corrosion-resistant, self-supporting device chassis, with tilt-proof equipment buggy, made of robust steel pipe galvanized and powder-coated, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, 2-fold safety system, unloader safety-valve c/w Infi ni-tely variable pressure and quantity regulation and safety-valve, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, external detergent supply
Injector and metering-valve ► With electric starter
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Max. Inlet temperature 45°CPump speed 1400rpmConnected load 10h.p. Diesel YanmarElectric-Starter Starter-GeneratorWeight net / with package 116 kg / 129 kg 124 kg / 137 kgDimensions device / with package (LxWxH) 1000 x 740 x 770 mm / 1200 x 800 x 900 mm 1000 x 740 x 970 mm / 1200 x 800 x 1250 mm
Robust, corrosion-resistant, self-supporting device chassis, with tilt-proof equipment buggy, made of robust steel pipe galvanized and powder-coated, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leaka-ge-return, gearbox for reducing the high-pressure pump speed, 2-fold safety system, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation and safety-valve, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, external detergent supply
Operating pressure 30-280bar/ 3-28MPaMax. pressure 300bar/ 30MPaDischarge capacity 300 - 1000l/hNozzle size 035Max. Inlet temperature 45°CPump speed 1400rpmConnected load 18h.p. B&S 2-CylinderElectric-Starter OptionWeight net / with package 96 kg / 103 kg 111 kg / 124 kgDimensions device / with package (LxWxH) 1000 x 740 x 770 mm / 1200 x 800 x 900 mm 1000 x 740 x 970 mm / 1200 x 800 x 1250 mm
Robust, corrosion-resistant, self-supporting device chassis, with tilt-proof equipment buggy, made of robust steel pipe galvanized and powder-coated, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, 2-fold safety system, unloader safety-valve c/w Infi ni-tely variable pressure and quantity regulation and safety-valve, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, external detergent supply
Injector and metering-valve ► With electric starter
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Max. Inlet temperature 45°CPump speed 1400rpmConnected load 10h.p. Diesel YanmarElectric-Starter Starter-GeneratorWeight net / with package 116 kg / 129 kg 124 kg / 137 kgDimensions device / with package (LxWxH) 1000 x 740 x 770 mm / 1200 x 800 x 900 mm 1000 x 740 x 970 mm / 1200 x 800 x 1250 mm
Robust, corrosion-resistant, self-supporting device chassis, with tilt-proof equipment buggy, made of robust steel pipe galvanized and powder-coated, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leaka-ge-return, gearbox for reducing the high-pressure pump speed, 2-fold safety system, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation and safety-valve, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, external detergent supply
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-135bar/ 3-13,5MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 600l/hNozzle size 040Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 3,1kW / 12,3AElectrical protection 13A slow-blowingWeight net / with package 149 kg / 170 kg 158 kg / 179 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic I - controls: (Start-stop system with switch-off delay, total-switch-off after 20min) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 497000 497003Retail price plus VAT £ 3,638.00 4,097.00
HD640
Type HD640-Standard HD640-PremiumVoltage 3/PE/AC/50Hz/400V ► Etronic I - Controls
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-200bar/ 3-20MPaMax. pressure 220bar/ 22MPaDischarge capacity 300 - 600l/hNozzle size 030Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 4,6kW / 8,0AElectrical protection 3x16A slow-blowingWeight net / with package 157 kg / 185 kg 167 kg / 195 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic I - controls: (Start-stop system with switch-off delay, total-switch-off after 20min) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-135bar/ 3-13,5MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 600l/hNozzle size 040Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 3,1kW / 12,3AElectrical protection 13A slow-blowingWeight net / with package 149 kg / 170 kg 158 kg / 179 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic I - controls: (Start-stop system with switch-off delay, total-switch-off after 20min) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 497000 497003Retail price plus VAT £ 3,638.00 4,097.00
HD640
Type HD640-Standard HD640-PremiumVoltage 3/PE/AC/50Hz/400V ► Etronic I - Controls
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-200bar/ 3-20MPaMax. pressure 220bar/ 22MPaDischarge capacity 300 - 600l/hNozzle size 030Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 4,6kW / 8,0AElectrical protection 3x16A slow-blowingWeight net / with package 157 kg / 185 kg 167 kg / 195 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic I - controls: (Start-stop system with switch-off delay, total-switch-off after 20min) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-125bar/ 3-12,5MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 13A slow-blowingWeight net / with package 158 kg / 186 kg 167 kg / 195 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-100bar/ 3-10MPaMax. pressure 120bar/ 12MPaDischarge capacity 300 - 840l/hNozzle size 070Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 3x16A slow-blowingWeight net / with package 158 kg / 186 kg 167 kg / 195 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-125bar/ 3-12,5MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 13A slow-blowingWeight net / with package 158 kg / 186 kg 167 kg / 195 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-100bar/ 3-10MPaMax. pressure 120bar/ 12MPaDischarge capacity 300 - 840l/hNozzle size 070Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 3x16A slow-blowingWeight net / with package 158 kg / 186 kg 167 kg / 195 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-190bar/ 3-19MPaMax. pressure 210bar/ 21MPaDischarge capacity 300 - 840l/hNozzle size 045Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 5,4kW / 10,1AElectrical protection 3x16A slow-blowingWeight net / with package 159 kg / 186 kg 168 kg / 198 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
Art. No. 442001 442002Retail price plus VAT £ 4,271.00 £4,743.00
HD1040 UK
Type HD1040-Standard HD1040-PremiumVoltage 3/PE/AC/50Hz/400V ► Etronic II - Controls
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-200bar/ 3-20MPaMax. pressure 220bar/ 22MPaDischarge capacity 300 - 840l/hNozzle size 043Hot water capacity 30 - 98°C (150°C)Pump speed 1400U/minConnected load 5,6kW / 11AElectrical protection 3x16A slow-blowingWeight net / with package 177 kg / 206 kg 186 kg / 218 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch, 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-160bar/ 3-16MPaMax. pressure 180bar/ 18MPaDischarge capacity 300 - 1200l/hNozzle size 070Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 7,6kW / 14,1AElectrical protection 3x16A slow-blowingWeight net / with package 177 kg / 206 kg 186 kg / 218 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch , 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-230bar/ 3-23MPaMax. pressure 250bar/ 25MPaDischarge capacity 300 - 1000l/hNozzle size 045Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 7,6kW / 14,1AElectrical protection 3x16A slow-blowingWeight net / with package 178 kg / 207 kg 187 kg / 219 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch , 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-160bar/ 3-16MPaMax. pressure 180bar/ 18MPaDischarge capacity 300 - 1200l/hNozzle size 070Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 7,6kW / 14,1AElectrical protection 3x16A slow-blowingWeight net / with package 177 kg / 206 kg 186 kg / 218 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch , 7,5m connection cable, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-230bar/ 3-23MPaMax. pressure 250bar/ 25MPaDischarge capacity 300 - 1000l/hNozzle size 045Hot water capacity 30 - 98°C (150°C)Pump speed 1400rpmConnected load 7,6kW / 14,1AElectrical protection 3x16A slow-blowingWeight net / with package 178 kg / 207 kg 187 kg / 219 kgDimensions device / with package (LxWxH) 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm 1070 x 735 x 1020 mm / 1190 x 880 x 1270 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, low-water cut-off, low-fuel cut-off, optical fl ame monitoring with photoelec-tric cell and fault indicator-light, steam-stage) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, integrated diesel-tank 25l, integrated detergent-tank 20l, robust rotary on-off switch , 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 12kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 16,8kW / 26,2AElectrical protection 3x32A slow-blowingWeight net / with package 119 kg / 140 kg 128 kg / 149 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-pis-ton pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 18kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 22,8kW / 32AElectrical protection 3x32A slow-blowingWeight net / with package 121 kg / 142 kg 130 kg / 151 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-pis-ton pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 12kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 16,8kW / 26,2AElectrical protection 3x32A slow-blowingWeight net / with package 119 kg / 140 kg 128 kg / 149 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-pis-ton pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 18kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 22,8kW / 32AElectrical protection 3x32A slow-blowingWeight net / with package 121 kg / 142 kg 130 kg / 151 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-pis-ton pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 24kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 28,8kW / 44AElectrical protection 3x50A slow-blowingWeight net / with package 124 kg / 145 kg 133 kg / 154 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-pis-ton pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 24kWHot water capacity 30 - 80°CPump speed 1400U/minConnected load 28,8kW / 44,AElectrical protection 3x50A trägeWeight net / with package 124 kg / 145 kg 133 kg / 154 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation. Triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infinitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar stainless steel
High pressure cleanerHot water, mobile, electric heated - series HDEHDE840-F 24 kW – food version, hot water resistantHigh Pressure CleanerHot water, mobile, electric heated - Series HDE
HDE840 24kW
Type HDE840 24kW-Standard HDE840 24kW-PremiumVoltage 3/PE/AC/50Hz/415V ► Etronic II - Controls
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 24kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 28,8kW / 44AElectrical protection 3x50A slow-blowingWeight net / with package 124 kg / 145 kg 133 kg / 154 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-pis-ton pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar
tary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-140bar/ 3-14MPaMax. pressure 160bar/ 16MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 24kWHot water capacity 30 - 80°CPump speed 1400U/minConnected load 28,8kW / 44,AElectrical protection 3x50A trägeWeight net / with package 124 kg / 145 kg 133 kg / 154 kgDimensions device / with package (LxWxH) 1070 x 735 x 785 mm / 1160 x 770 x 960 mm 1070 x 735 x 1310 mm / 1160 x 770 x 1350 mm
Food appliance with abrasion resistant high pressure hose blue, self-supporting, robust, corrossions free, rotation-moulded device-chassis for food industry, stainless steel, impact-resistant device-cover made of ABS, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation. Triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (start-stop system with switch-off delay, stand-by system for heating, low-water cut-off), unloader safety-valve c/w Infinitely variable pressure and quantity regulation, 4 large rubber wheels for rough terrain, with a patented wheel brake 2-way, storage possibility for all accessories, 2 integrated detergent-tank with 20l capacity, 2-stage rotary on-off switch with stand-by function, 7,5m connection cable, removable ergonomic drawbar stainless steel
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 13h.p. Gasoline HondaElectric-Starter OptionWeight net / with package 216 kg / 229 kg 224 kg / 237 kgDimensions device / with package (LxWxH) 1200 x 800 x 800 mm / 1210 x 810 x 960 mm 1200 x 800 x 800 mm / 1210 x 810 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of steel galvanized and powder-coa-ted, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, separately driven burner motor for heating, 4-fold safety system, consisting of pressure-switch, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, safety-valve and thermostat, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, storage possibility for all accessories, removable standard diesel-canister 20l, external 2-way detergent supply, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-280bar/ 3-28MPaMax. pressure 300bar/ 30MPaDischarge capacity 300 - 1000l/hNozzle size 035Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 18h.p. Gasoline B&SElectric-Starter OptionWeight net / with package 206 kg / 234 kg 215 kg / 243 kgDimensions device / with package (LxWxH) 1200 x 800 x 800 mm / 1210 x 810 x 960 mm 1200 x 800 x 800 mm / 1210 x 810 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of steel galvanized and powder-coa-ted, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, separately driven burner motor for heating, 4-fold safety system, consisting of pressure-switch, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, safety-valve and thermostat, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, storage possibility for all accessories, removable standard diesel-canister 20l, external 2-way detergent supply, removable ergonomic drawbar
Art. No. device with electric-starter/ Retail price plus VAT 165001/ £ 13,892.00 165002/ £ 14,363.00
22
High pressure cleanerHot water, mobile, oil heated wih engine series HDB - HDB1540 High Pressure CleanerHot water, mobile, oil heated, with engine - Series HDB
HDB1240
HDB1540
Type HDB1240-Standard HDB1240-PremiumEngine Gasoline ► 10m HP-Hose DN08 - 315bar
► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle- Pro-
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 13h.p. Gasoline HondaElectric-Starter OptionWeight net / with package 216 kg / 229 kg 224 kg / 237 kgDimensions device / with package (LxWxH) 1200 x 800 x 800 mm / 1210 x 810 x 960 mm 1200 x 800 x 800 mm / 1210 x 810 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of steel galvanized and powder-coa-ted, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, separately driven burner motor for heating, 4-fold safety system, consisting of pressure-switch, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, safety-valve and thermostat, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, storage possibility for all accessories, removable standard diesel-canister 20l, external 2-way detergent supply, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-280bar/ 3-28MPaMax. pressure 300bar/ 30MPaDischarge capacity 300 - 1000l/hNozzle size 035Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 18h.p. Gasoline B&SElectric-Starter OptionWeight net / with package 206 kg / 234 kg 215 kg / 243 kgDimensions device / with package (LxWxH) 1200 x 800 x 800 mm / 1210 x 810 x 960 mm 1200 x 800 x 800 mm / 1210 x 810 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of steel galvanized and powder-coa-ted, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, separately driven burner motor for heating, 4-fold safety system, consisting of pressure-switch, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, safety-valve and thermostat, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, storage possibility for all accessories, removable standard diesel-canister 20l, external 2-way detergent supply, removable ergonomic drawbar
Protection ► Stainless-Steel Jet-Nozzle 25° ► Spray-Lance 900mm c/w Rotary-Nozzle ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve ► With electric-starter
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 050Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 10h.p. Diesel YanmarElectric-Starter Starter-GenerartorWeight net / with package 238 kg / 251 kg 246 kg / 259 kgDimensions device / with package (LxWxH) 1200 x 800 x 735 mm / 1210 x 810 x 1160 mm 1200 x 800 x 1005 mm / 1210 x 810 x 1350 mm
Robust, corrosion-resistant, self-supporting device chassis, impact-resistant device-cover made of steel galvanized and powder-coa-ted, triplex-piston pump with brass pump head, high-performance ceramic piston, stainless-steel valves, leakage-return, gearbox for reducing the high-pressure pump speed, separately driven burner motor for heating, 4-fold safety system, consisting of pressure-switch, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, safety-valve and thermostat, automatic load-idle speed control, 4 large ruber-pneumatic tires for rough terrain, storage possibility for all accessories, removable standard diesel-canister 20l, external 2-way detergent supply, removable ergonomic drawbar
tection ► Stainless-Steel Jet-Nozzle 25° ► 4l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 2,6kW / 12,8AElectrical protection 13A slow-blowingWeight net / with package 102 kg/ 116 kg 102 kg/ 106 kgDimensions device / with package (LxWxH) 780 x 510 x 540 mm / 1200 x 800 x 700 mm 780 x 510 x 540 mm / 1200 x 800 x 700 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), wall-bracket, drawable technic-tablar on telescopic rails, triplex-piston pump with brass pump head, hot-wa-ter resistant up to 60°c, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min with leakage-recognition, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, robust rotary on-off switch, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► 4l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 055Max. Inlet temperature 80°CPump speed 1400rpmConnected load 6,5kW / 11,7AElectrical protection 3x16A slow-blowingWeight net / with package 112 kg / 126 kg 108 kg / 122 kgDimensions device / with package (LxWxH) 780 x 510 x 540 mm / 1200 x 800 x 700 mm 780 x 510 x 540 mm / 1200 x 800 x 700 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), wall-bracket, drawable technic-tablar on telescopic rails, triplex-piston pump with brass pump head, hot-wa-ter resistant up to 60°c, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min with leakage-recognition, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, robust rotary on-off switch, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► 4l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 2,6kW / 12,8AElectrical protection 13A slow-blowingWeight net / with package 102 kg/ 116 kg 102 kg/ 106 kgDimensions device / with package (LxWxH) 780 x 510 x 540 mm / 1200 x 800 x 700 mm 780 x 510 x 540 mm / 1200 x 800 x 700 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), wall-bracket, drawable technic-tablar on telescopic rails, triplex-piston pump with brass pump head, hot-wa-ter resistant up to 60°c, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min with leakage-recognition, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, robust rotary on-off switch, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► 4l Water-Storage tank ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 055Max. Inlet temperature 80°CPump speed 1400rpmConnected load 6,5kW / 11,7AElectrical protection 3x16A slow-blowingWeight net / with package 112 kg / 126 kg 108 kg / 122 kgDimensions device / with package (LxWxH) 780 x 510 x 540 mm / 1200 x 800 x 700 mm 780 x 510 x 540 mm / 1200 x 800 x 700 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), wall-bracket, drawable technic-tablar on telescopic rails, triplex-piston pump with brass pump head, hot-wa-ter resistant up to 60°c, high-performance ceramic piston, stainless-steel valves, leakage-return, start-stop system with switch-off delay, total-switch-off after 20min with leakage-recognition, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, robust rotary on-off switch, 7,5m connection cable
High pressure cleanerCold water, stationary - series KSMKSM1840 – hot water resistant
KSM1840hot water resistant
High Pressure CleanerCold water, stationary - Series KSM
KSM2740hot water resistant
Type KSM1840 KSM1840-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 1800l/hNozzle size 2 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 14,0kW /25,5AElectrical protection 3x32A slow-blowingWeight net / with package 493 kg/ – 493kg/ –Dimensions device / with package (LxWxH) 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
Type KSM2740 KSM2740-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 2700l/hNozzle size 3 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 21,0kW /38AElectrical protection 3x50A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
High pressure cleanerCold water, stationary - series KSMKSM2740 – hot water resistant
KSM1840hot water resistant
High Pressure CleanerCold water, stationary - Series KSM
KSM2740hot water resistant
Type KSM1840 KSM1840-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 1800l/hNozzle size 2 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 14,0kW /25,5AElectrical protection 3x32A slow-blowingWeight net / with package 493 kg/ – 493kg/ –Dimensions device / with package (LxWxH) 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
Type KSM2740 KSM2740-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 2700l/hNozzle size 3 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 21,0kW /38AElectrical protection 3x50A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm 1130 x 800 x 2090 mm / 1290 x 1040 x 2100 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
High pressure cleanerCold water, stationary - series KSMKSM3640 – hot water resistant
KSM3640hot water resistant
High Pressure CleanerCold water, stationary - Series KSM
KSM4540hot water resistant
Type KSM3640 KSM3640-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 3600l/hNozzle size 4 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 27,0kW /50AElectrical protection 3x63A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 2130 x 800 x 2090 mm / – 2130 x 800 x 2090 mm / –
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
Type KSM4540 KSM4540-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 4500l/hNozzle size 5 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 33,5kW /60,5AElectrical protection 3x80A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 2130 x 800 x 2090 mm / – 2130 x 800 x 2090 mm / –
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
Art. No. 1564 156400
Retail price plus VAT £ 29,497.00 £ 34,568.00
26
INOX
High pressure cleanerCold water, stationary - series KSMKSM4540 – hot water resistant
KSM3640hot water resistant
High Pressure CleanerCold water, stationary - Series KSM
KSM4540hot water resistant
Type KSM3640 KSM3640-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 3600l/hNozzle size 4 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 27,0kW /50AElectrical protection 3x63A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 2130 x 800 x 2090 mm / – 2130 x 800 x 2090 mm / –
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
Type KSM4540 KSM4540-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 4500l/hNozzle size 5 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 33,5kW /60,5AElectrical protection 3x80A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 2130 x 800 x 2090 mm / – 2130 x 800 x 2090 mm / –
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
Art. No. 1564 156400
Retail price plus VAT £ 29,497.00 £ 34,568.00
26
INOX
High pressure cleanerCold water, stationary - series KSMKSM5440 – hot water resistant
KSM5440hot water resistant
High Pressure CleanerCold water, stationary - Series KSM und Series KW
Type KSM5440 KSM5440-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 5400l/hNozzle size 6 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 40,0kW /72,5AElectrical protection 3x80A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 2130 x 800 x 2090 mm / – 2130 x 800 x 2090 mm / –
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
High pressure cleanerCold water, stationary - Series KWKW1200
KSM5440hot water resistant
High Pressure CleanerCold water, stationary - Series KSM und Series KW
Type KSM5440 KSM5440-INOXVoltage 3/PE/AC/50Hz/415V ► 7“ Touch-Screen Monitor
► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
► Stainless Steel (Food-Safe) ► 7“ Touch-Screen Monitor ► PLC Controls Siemens S7-1200 ► Automatic Switch On and Off Cont-
rol for high-pressure pumps ► Automatic Stand-By Operation ► Pressureless pipes in Stand-By ► Booster-Supply-Pump ► 60l Water-Storage tank ► Water-Supply separation acc. water reg. ► Maintenance interval display
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 900 - 5400l/hNozzle size 6 x 050Max. Inlet temperature 80°CPump speed 1400rpmConnected load 40,0kW /72,5AElectrical protection 3x80A slow-blowingWeight net / with package – –Dimensions device / with package (LxWxH) 2130 x 800 x 2090 mm / – 2130 x 800 x 2090 mm / –
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stainless-steel), suitable for fl oor installation, triplex-piston pump with chrome-nickel pump head, hot-water resistant up to 85°c, high-performance ceramic piston, stainless-steel valves, leakage-return, booster-pump for charging the high-pressure pumps (cavitation avoidance), automatic pump-on and shut-off control by plc, total-switch-off between 5 to 600min - adjusta-ble, with leakage-recognition, unloader safety-valve for monitoring, pressureless pipe-system in stand-by mode, robust rotary on-off switch - lockable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 13A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-100bar/ 3-10MPaMax. pressure 120bar/ 12MPaDischarge capacity 300 - 840l/hNozzle size 070Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 13A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-120bar/ 3-12MPaMax. pressure 140bar/ 14MPaDischarge capacity 300 - 720l/hNozzle size 050Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 13A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-100bar/ 3-10MPaMax. pressure 120bar/ 12MPaDischarge capacity 300 - 840l/hNozzle size 070Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 3,3kW / 13AElectrical protection 13A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-160bar/ 3-16MPaMax. pressure 180bar/ 18MPaDischarge capacity 300 - 1200l/hNozzle size 070Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 7,6kW / 14,1AElectrical protection 3x16A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 055Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 6,5kW / 11,7AElectrical protection 3x16A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-160bar/ 3-16MPaMax. pressure 180bar/ 18MPaDischarge capacity 300 - 1200l/hNozzle size 070Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 7,6kW / 14,1AElectrical protection 3x16A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
tection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w
Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 055Hot water capacity 30 - 98°CPump speed 1400rpmConnected load 6,5kW / 11,7AElectrical protection 3x16A slow-blowingWeight net / with package 301 kg / 318 kg 300 kg / 317 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made from galvanized steel and powder-coated (option INOX: device-chassis made out of stain-less-steel), suitable for fl oor installation, triplex-piston pump with brass pump head, nickel plated, high-performance ceramic piston, stainless-steel valves, leakage-return,Etronic II - controls: (Start-stop system with switch-off delay, total-switch-off after 20min, OPH-counter with service information, optical fl ame monitoring with photoelectric cell and fault indicator-light) 2 motors system (independent of the direction of rotation) separately for H.P.-Pump and heating, unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, integrated diesel-tank 60l, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
High pressure cleanerHot water, stationary, electric heated - series HSC HSC840-INOX 24kW
HSC840-INOX 24kW
Type HSC840-INOX 24kWVoltage 3/PE/AC/50Hz/415V ► Stainless steel (food safe)
► Etronic II - Controls ► 10m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle Protection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-130bar/ 3-13MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 24kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 28,8kW / 44,2AElectrical protection 3x50A slow-blowingWeight net / with package 264 kg / 281 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made out of stainless-steel, suitable for fl oor installation, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation.,triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - cont-rols: (start-stop system with switch-off delay, stand-by system for heating, OPH-counter with service information, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, seperate space for 2 x 20l cleaning detergent-container c/w remote activa-tion, 2 different operating control level, 3 robust on-off rotary switches for H.P. pump, heating and detergent, 7,5m connection cable
Art. No. 531Retail price plus VAT £ 11,818.00
High Pressure CleanerHot water, stationary, electric heated - Series HSC
HSC1140-INOX 30kW
Type HSC1140-INOX 30kWVoltage 3/PE/AC/50Hz/415V ► Stainless steel (food safe)
► Etronic II - Controls ► 10m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle Protection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 055Heating capacity 30kWHeisswasserleistung 30 - 80°CPump speed 1400rpmConnected load 36,5kW / 57,0AElectrical protection 3x63A slow-blowingWeight net / with package 292 kg / 309 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made out of stainless-steel, suitable for fl oor installation, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, stand-by system for heating, OPH-counter with service information, low-water cut-off), unloader safe-ty-valve c/w infi nitely variable pressure and quantity regulation, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
Art. No. 533Retail price plus VAT £ 12,180.00
31
INOX
High pressure cleanerHot water, stationary, electric heated - series HSCHSC1140-INOX 30kW
HSC840-INOX 24kW
Type HSC840-INOX 24kWVoltage 3/PE/AC/50Hz/415V ► Stainless steel (food safe)
► Etronic II - Controls ► 10m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle Protection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-130bar/ 3-13MPaMax. pressure 150bar/ 15MPaDischarge capacity 300 - 720l/hNozzle size 045Heating capacity 24kWHot water capacity 30 - 80°CPump speed 1400rpmConnected load 28,8kW / 44,2AElectrical protection 3x50A slow-blowingWeight net / with package 264 kg / 281 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made out of stainless-steel, suitable for fl oor installation, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation.,triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - cont-rols: (start-stop system with switch-off delay, stand-by system for heating, OPH-counter with service information, low-water cut-off), unloader safety-valve c/w Infi nitely variable pressure and quantity regulation, seperate space for 2 x 20l cleaning detergent-container c/w remote activa-tion, 2 different operating control level, 3 robust on-off rotary switches for H.P. pump, heating and detergent, 7,5m connection cable
Art. No. 531Retail price plus VAT £ 11,818.00
High Pressure CleanerHot water, stationary, electric heated - Series HSC
HSC1140-INOX 30kW
Type HSC1140-INOX 30kWVoltage 3/PE/AC/50Hz/415V ► Stainless steel (food safe)
► Etronic II - Controls ► 10m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle Protection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Operating pressure 30-180bar/ 3-18MPaMax. pressure 200bar/ 20MPaDischarge capacity 300 - 1000l/hNozzle size 055Heating capacity 30kWHeisswasserleistung 30 - 80°CPump speed 1400rpmConnected load 36,5kW / 57,0AElectrical protection 3x63A slow-blowingWeight net / with package 292 kg / 309 kgDimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made out of stainless-steel, suitable for fl oor installation, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - controls: (Start-stop system with switch-off delay, stand-by system for heating, OPH-counter with service information, low-water cut-off), unloader safe-ty-valve c/w infi nitely variable pressure and quantity regulation, seperatee space for 2 x 20l cleaning detergent-container c/w Remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
Art. No. 533Retail price plus VAT £ 12,180.00
31
INOX
High pressure cleanerHot water, stationary, gas heating - series HSCHSC1140-INOX Gas
High Pressure CleanerHot water, stationary, gas heated - Series HSC
HSC1140-INOX Gas
Type HSC1140-INOX GasVoltage 3/PE/AC/50Hz/415V ► Stainless steel (food safe)
► Etronic II - Controls ► 10m HP-Hose DN08 - 315bar ► Trigger-Gun with swivel ► Spray-Lance 900mm c/w Nozzle Protection ► Stainless-Steel Jet-Nozzle 25° ► Water-Supply separation acc. water reg. ► Chemical supply in high-pressure Jet c/w Metering-valve
Dimensions device / with package (LxWxH) 1220 x 755 x 1625 mm / 1250 x 815 x 1755 mm
Self-supporting, robust, device-chassis made out of stainless-steel, suitable for fl oor installation, stainless-steel hotwater-boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during stand-by operation, triplex-piston pump with chrome nickel pump head (hot-water resistant), high-performance ceramic piston, stainless-steel valves, leakage-return, Etronic II - cont-rols: (Start-stop system with switch-off delay, stand-by system for heating, OPH-counter with service information, low-water cut-off), unloader safety-valve c/w infi nitely variable pressure and quantity regulation, seperatee space for 2 x 20l cleaning detergent-container c/w remote activation, 2 different operating control level, 3 robust on-off rotary switches for H.P. Pump, heating and detergent, 7,5m connection cable
