www.composite-arf.com www.composite-arf.com more info at: more info at: Specifications: Length: 2510 mm (89”) Wingspan: 2790 mm (110”) Weight: 18 - 19kg (39 - 42 Lbs) dry RC-Equipment: 8 High Power Servos Engine: Wren Mw54 or Jetcat SPT5 Landing Gear: Behotec Custom C-50 Embraer T-27 Tucano for Turbo-prop power Embraer T-27 Tucano for Turbo-prop power l Quarter-Scale Embraer TUCANO, designed to suit both the JetCat SPT-5 and the Wren MW54 turboprop units. l Highly prefabricated. Hinging, servo mounts, main bulkheads etc all finished for you. Strong carbon molded engine mount. Two piece cowling makes engine access very quick. Dual composite fuel tanks optimally positioned ensure no CG changes during flight. CNC milled parts for gear installation. Spinner, vacuum- formed cockpit tub, seats & pilots all included in kit. l Great flying characteristics, with smooth and precise aerobatics, wide speed range and exceptionally slow landings using the large effective flaps. l Optionally available is a custom manufactured Behotec C-50 landing gear set, designed specially for our Tucano, which includes oleos, wheels, brakes, connection set, air cylinders etc. l Durable full-composite structure, painted in the molds for your convenience - to get you in the air faster ! Initially 2 scale color schemes, Brazilian Red and Brazilian Blue, followed shortly by an all-grey version (Product #693000). l Full spare parts service & technical support available worldwide. Embraer TUCANO - Quarter Scale Turboprop Embraer TUCANO - Quarter Scale Turboprop Brazilian Red Scheme #691000 Brazilian Red Scheme #691000 Brazilian BlueScheme #692000 Kit Contents #691000 All Grey Scheme #693000
Transcript
www.composite-arf.comwww.composite-arf.commore info at:more info at:
Specifications:Length: 2510 mm (89”)Wingspan: 2790 mm (110”)Weight: 18 - 19kg (39 - 42 Lbs) dryRC-Equipment: 8 High Power ServosEngine: Wren Mw54 or Jetcat SPT5Landing Gear: Behotec Custom C-50
Embraer T-27 Tucano for Turbo-prop powerEmbraer T-27 Tucano for Turbo-prop power
l Quarter-Scale Embraer TUCANO, designed to suit both the JetCat SPT-5 and the Wren MW54 turboprop units.l Highly prefabricated. Hinging, servo mounts, main bulkheads etc all finished for you. Strong carbon molded engine mount. Two piece cowling makes engine access very quick. Dual composite fuel tanks optimally positioned ensure no CG changes during flight. CNC milled parts for gear installation. Spinner, vacuum-formed cockpit tub, seats & pilots all included in kit.l Great flying characteristics, with smooth and precise aerobatics, wide speed range and exceptionally slow landings using the large effective flaps. l Optionally available is a custom manufactured Behotec C-50 landing gear set, designed specially for our Tucano, which includes oleos, wheels, brakes, connection set, air cylinders etc.l Durable full-composite structure, painted in the molds for your convenience - to get you in the air faster ! Initially 2 scale color schemes, Brazilian Red and Brazilian Blue, followed shortly by an all-grey version (Product #693000).l Full spare parts service & technical support available worldwide.
www.composite-arf.comwww.composite-arf.commore info at:more info at:
Meinrad Kammerlander (CH)+41 714112130 Franz Walti (CH) +41 62 7943154
USA Reps: Ray Labonte (USA) 207 329 7713 Jason Shulman (USA) 407 322 0513 Larry Tudor (USA) 717 235 2997 Andy Kane (USA) 301 785 3022 Bob Shapiro (USA) 941 232 8188
Landing gear, wheels & brakes are a custom set manufactured by Behotec - based on their strong and reliable C50, as used in our Lightning.
The enormous Tucano cockpit makes it easy to locate all the equipment, and there’s plenty of room for dual fuel tanks and even smoke tanks if you wish.
The rudder and elevators are hinged for you at the factory, using tubes in phenolic hinge posts for scale appearance. The dual phenolic control surface horns are also finished for you....
Large and effective bottom-hinged flaps, with integral top flap glove, are superb for power-on landings - and a big advantage in the case of an aborted approach. Control horns are all factory-installed for you.
Kit includes a vacuum-formed cockpit tub, seats, instrument panel and pilot. Other optional detailing parts and items may be available later. Lots of space for ‘superscale’ detailing in there if you like that!
Bruno Cavuto (I) +39 333 7110358 Michael Binder (A) +43 680 2035874 Geir Flesche (Scandinavia) +47 924 55780 Jose Rios (Spain) +34 609 019507 Dave Wilshere (UK) +44 1923 465712 Mark Schroeder (UK) +44 7712 668696 Marc Hauss (F) +33 3 88939080 Silvio Butscher (CH / F) +41 32 8591212 Martin Sannwald (CH) +41 71 9666251
S e e w e b s i t e f o r w o r l d w i d e R e p l i s t , a n d e m a i l a d d r e s s e s .
Molded carbonfibre engine mount has integrated nose retract mount and is extremely strong and rigid. 2 piece cowling gives easy engine access. Custom spinner included.
