of 18
8/18/2019 EMU(English)
1/18
Environmental
Monitoring Control Unit
2015 07 01
8/18/2019 EMU(English)
2/18
1. Main feature
- Through the built in remote firmware upgrade function,Firmware upgrade is available without any service centervisiting
- You can check and store the status of remote siteusing the camera.
- It has a built in web-server which is based on EmbeddedLinux, so without the extra program or external server equipyou can link and manage it through web-browser whereverthe internet connection is available.
Real time monitoring
- Built in SNMP function which is the standard protocolof TCP/IP let you communicate with outer network moresmoothly.
- Using the five sensors and camera, you can check theenvironmental status and monitor the inside/outside ofremote office in real time
Effective management
8/18/2019 EMU(English)
3/18
2. Structure
2.1 H/W structure
Control B’rdControl B’rdSMPSSMPS CPUCPU
Status Check (LED) Console & TCP/IP
Digital I/O
Temperature
& humidity sensor
EMU
#2
EMU
#1
EtherNet
FTP Telnet
EMS
Sensors
Sensors
SNMP
2.2 S/W Structure
8/18/2019 EMU(English)
4/18
2. Structure
2.3 Structure list
8/18/2019 EMU(English)
5/18
3. Shape
Wall mountingtag
8/18/2019 EMU(English)
6/18
3. Shape
8/18/2019 EMU(English)
7/18
AC 86V ~ 256V
3. Shape
8/18/2019 EMU(English)
8/18
4.1 Shape of Sensor
Temperature & Humidity Sensor Flooding sensor
Fire sensor Door sensor
Emergency alarm Lamp Camera
4. Sensor introduction
8/18/2019 EMU(English)
9/18
4.2 Sensor specification
Sensor Model Item Spec
Temperaturesensor
EMUS-T01
MeasuringRange
Built in Circuit ; -20°C ~ +80°C
Currency Under 2mA
Voltage DC +3.3V
Humidity
sensor
MeasuringRange
5 ~ 95%RH
Voltage DC +3.3V
Currency 1.5mA (Max 3mA)
WorkingTemperature
0°C ~ +80°C
Fire sensor EMUS-F01
Sensing method lonization Smoke sensing
CurrencyUnder 50㎂(Monitor currency),Under 50㎃(Conduct Currency)
Voltage DC +24V±20%
Environmentalcondition
Temperature -10℃∼+50℃,Humidity under 85%RH
Sensing rangeHeight under 4m : 150m²,
Height over 4m : 75m²
Floodingsensor
EMUS-W01
Sensing methodLeakage Current sensing consisted of two
step
Voltage No power
Sensingcurrency
~ 1㎂
Door sensor EMUS-D01Sensing method Magnetic type (Normal-Close type)
Voltage No power
Camera EMUS-C01
Image sensor 1/3" Color CMOS
Pixel 330,000 pixel
Speed VGA : 15 frame/sec
S/Noise Ratio >48dB
Power DC5V, via USB PC
Output signal USB Format
Emergencyalarm lamp
EMUS-L01Power 220V / 2A
Control method Relay contact method (DO: DC24V)
4. Sensor introduction
8/18/2019 EMU(English)
10/18
I. Temperature sensor§ Measuring range : -20℃ ~ +80℃§ Temperature fault tolerant range : ±3℃, Maximum 30M measuring
is available.
II. Humidity Sensor§ Measuring RH range : 30% ~ 90%
§ 25℃, 60%RH(standard), fault tolerant range is ±5%RH
III. Door Sensor§ Magnetic normal Closing type.§ Door open/closing : Sensing the door open through DI-contact-
ON/OFF (over 2sec non-contact is sensed as open).
IV. Fire sensor§ Ionization Smoke sensing
V. Flooding sensor§ Flooding monitoring using the electronic signal, circuit-short
construction.
§ Detect the flooding (Consisted of 2step)
4. Sensor introduction
4.3 Feature of Sensor
Ⅵ. Camera
§ Camera has its cover, so external looks good.
§
When the alarm is on, automatically monitor and store the statusof the office inside.
§ Store the image data min. for 2 sec(1 frame/sec). When thepower supply is stopped there is no impact on stored data.
§ Operator can replay the stored image data optionally.
§ Image resolution is over 320x240pixel. (USB A TYPE)
Ⅶ. Emergency Lamp§
When the camera is operated by the notice of emergency alarm orinvader, the emergency lamp is automatically turned on.
§ Turned off automatically after 3 min.§ Operator can Turn ON/OFF from remote place when it needed.
8/18/2019 EMU(English)
11/18
5. Web GUI
5.1 Log in capture
5.2 Main capture
8/18/2019 EMU(English)
12/18
5. Web GUI
5.3 History management
5.3.1 Fault history
5.3.2 Control history
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Flood level 1
Host name Obstacle Obstacle kevel Occurred time Cleared time Continued time
Initializationbstacle History
H ost name O bstacle Obstacle kevelost name Obstacle Occurred timebstacle kevelost name Obstacle Cleared timeccurred timebstacle kevelost name O bstacle Continued tim eleared timeccurred timebstacle kevelost name Obstacle
8/18/2019 EMU(English)
13/18
5. Web GUI
5.3 History management
5.3.3 Image history
5.3.4 Replay image history
8/18/2019 EMU(English)
14/18
5. Web GUI
5.4 Operation management
5.4.1 Network setup
5.4.2 Firewall setup
8/18/2019 EMU(English)
15/18
5. Web GUI
5.4 Operation management
5.4.3 User management
5.4.4 Software upgrade
8/18/2019 EMU(English)
16/18
5. Web GUI
5.5 Structure management
5.5.1 Analog sensor setup
5.5.2 Digital sensor setup
8/18/2019 EMU(English)
17/18
5.5 Structure management
5.5.3 Digital output setup
5. Web GUI
5.6 Image play
8/18/2019 EMU(English)
18/18
6. Distinguished features (relative to competitors)
6.1 Slim/Light/Single bracket
WDH=350 x 250 x 1U, Aluminum material,
rack-fixing and wall-attaching single bracket unit.
6.2 scalability (spare port)
DI 1port, DO 2port
6.3 Free voltage input
AC 86V ~ 256V voltage input is available
6.4 Fire sensor reset function
When the fire sensor malfunction is occurred,
operator can reset it from remote place.
6.5 10M/100M mark function (Mark the data sending & receiving : Yellow)
Green lamp on : When the LAN port is 100M,
Green lamp off : when the LAN port is 10M
6.6 Flooding sensor : Two step alarm function
Flooding sensor distinguishes the level of flooding as two
and alarms it as the level.
6.7 Emergency lamp module function improvement
Easy setup relative to existing method (simple wiring structure)
High Quality & Low Cost