Energy savings

At home

Structure

1.Why at home?2. Kitchen3. Bathroom4. Livingroom5. Energy - saving house

1. Why at home?“ I can’t save energy at home…!”A lot of people say that eclamation. But are they right?

No they aren‘t! Because there are many houses in the world and you can save energy in every part.Now look at our presentation and found outthe possibilities how to save!

2. Kitchen Induction-hearth needs fewer energy

no residual heat

Closed windows while cooking no loss of energy

Baking oven open the warm oven if nothing is in “heater”

Switch off when food nearly ready using residual energy

Fridge : Not too many and warm things in the fridge

otherwise too high energy consumption Not to few things in the fridge

air bad heat-conductor higher energy consumption

Don’t let the door to long open energy loss

If there is the time defrost food from the freezer in the fridge

“help” the fridge with cold

3. Bathroom-water saving = energy saving

->save energy for warming up the watereasy to save energy in the bathroom

-> shower is better than bath

you needs 50l you needs 150l – 180l->water-save-showerhead

minimal waterconsumption by aeration through the water jet

- protec 66% of water

4. Livingroom and bedroom- A lot of people use the Standby-function of some

electrical devices (TV, DVD player…)-> energy consumption in Germany for a year: ca. 20 TWh

don‘t use Standby-function (use elec. distributions with flip switches) -> avoidance from appearances of off

- Use energy-saving lamp-> 75-80% lower

energy consumption

5. Energy – saving house great windows on the south side of the house –> using sun energy small windows on the north side of the house –> lesser energy losing good isolated walls ( with wood, mineral cotton) –> lesser energy

losing windows with 3 glass panes, between them inert gas –> isolation

windows not to open –> no cold air comes inside

–> that’s why ventilation system with heat exchanger

for energy –> solar collectors and solar cells on the top of the house