Date post: | 13-Dec-2015 |
Category: |
Documents |
Upload: | carmella-maryann-owen |
View: | 221 times |
Download: | 1 times |
Engineering Graphics with SolidWorks
Instructors Name
Course Name
Copyright Planchard & Planchard
Chapter 8 – Objectives
Create a Custom Drawing and Sheet Template.
Create three drawings: BATTERY FLASHLIGHT O-RING-DESIGN-
TABLE Create an O-RING
Design Table.
Copyright Planchard & Planchard
Chapter 8 – Objectives
Ability to apply the following drawing tools: Model View Task Pane (View
Palette) Projected View Detail View Note Model Items Balloon
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template The foundation of a
new SolidWorks drawing is the Drawing Template. Drawing size, drawing standards, company information, manufacturing, and or assembly requirements, units and other properties are defined in the Drawing Template.
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template The Sheet Format is
incorporated into the Drawing Template.
The Sheet Format contains: Border Title Block information Revision Block information Company name Logo information Custom Properties SolidWorks Properties
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template
Create a new drawing.
Set the Sheet document Properties.
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template
Set the Document Properties. Set Overall drafting
standard Set Unit system Set precision
Save the drawing document.
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template The Title block contains
text fields linked to: System Properties Custom Properties
System Properties are determined from the SolidWorks documents.
Custom Property values are assigned to named variables.
Save time. Utilize System Properties and define Custom Properties in your Sheet Formats.
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template Tolerance values are
different for inch and millimeter document templates.
Enter the Tolerance values for the inch template.
Enter the Tolerance values for the millimeter template.
Save drawing templates with unique filenames.
Copyright Planchard & Planchard
Chapter 8 – Custom Drawing and Sheet Template Address company logo. Save the Sheet Format as
a Custom Sheet Format. Combine the Sheet
Format with the Drawing Template to create a Custom Drawing Template.
Use the Custom Sheet Format and Drawing Template to create drawings in this chapter.
Save the drawing Template.
Copyright Planchard & Planchard
Chapter 8 – BATTERY Drawing
Create the BATTERY drawing from the BATTERY part.
Utilize the Model View feature in the Drawings toolbar.
The Front view is the first view inserted into the drawing.
Note: The Top view and Right view are Projected views.
Insert dimensions into the drawing with the Insert Model Items feature.
Copyright Planchard & Planchard
Chapter 8 – BATTERY Drawing
Insert Views: Insert the Front Insert the Top Insert the Right Insert an Isometric
Note –You are in Third Angle Projection.
Save the drawing document.
Copyright Planchard & Planchard
Chapter 8 – BATTERY Drawing
A Detail view enlarges an area of an existing view.
You need to specify location, name, shape and scale if different than the Parent scale.
Create a Detail view: Named A with a circle 1:1 Scale
A Detail circle specifies the area of an existing view to enlarge.
The circle contains the same letter as the view name.
Copyright Planchard & Planchard
Chapter 8 – BATTERY Drawing
Insert dimensions into the drawing sheet.
Move dimensions in Drawing View1 and Drawing View3.
Address extension line gaps.
Move all dimensions off the view.
Copyright Planchard & Planchard
Chapter 8 – BATTERY Drawing
Insert a Note in the Title block. Remember the two modes: Edit Sheet Format Edit Sheet
Save the drawing document.
Copyright Planchard & Planchard
Chapter 8 – FLASHLIGHT Drawing
Create a new drawing named FLASHLIGHT.
Insert the FLASHLIGHT assembly Isometric view.
Copyright Planchard & Planchard
Chapter 8 – FLASHLIGHT Drawing
Modify the view properties to display an Exploded view.
Copyright Planchard & Planchard
Chapter 8 – FLASHLIGHT Drawing
The Bill of Materials reflects the components of the FLASHLIGHT assembly.
Create a drawing with a Bill of Materials.
Copyright Planchard & Planchard
Chapter 8 – FLASHLIGHT Drawing
Label each component with Balloon text.
Copyright Planchard & Planchard
Chapter 8 – O-RING DESIGN TABLE and Drawing A design table is a spreadsheet
used to create multiple configurations in a part or assembly.
The design table controls the dimensions and parameters in the part.
Utilize the design table to modify the overall path diameter and profile diameter of the O-RING.
Create three configurations of the O-RING.
Copyright Planchard & Planchard
Chapter 8 – O-RING DESIGN TABLE and Drawing
Create a new drawing.
Display the Default and Medium size of the O-RING part.