+ All Categories
Home > Documents > EnPlus - astridsea.com2015-1-8 · E. x c e l l e n c a s a S tan d r d. NATURALGREENPOWER...

EnPlus - astridsea.com2015-1-8 · E. x c e l l e n c a s a S tan d r d. NATURALGREENPOWER...

Date post: 26-Apr-2019
Category:
Upload: dangkien
View: 213 times
Download: 0 times
Share this document with a friend
2
NATURALGREENPOWERNATURALGREENPOWERNATURALGREENPOWERNATURALGREENPOWERNATURALGREENPOWER E x c e l l e n c e a s a S t a n d a r d Uninterruptible Power Supplies True On-Line Double Conversion technology provides full protection from all power problems with pure sine wave output Protects mission critical applications from downtime, data loss, data corruption,and process interruption by providing continuous well reglated clean power Fully digitalized microprocessor controlled LCD display, LEDs display for easy viewing of real time operational status and control parameters, power usage, battery run time and etc Audible sound for fault alert condition Plug & Play installation User swappable batteries replacement Extended run time capability with external battery modules Custom design for long hour back-up Advanced Battery Management systems Automatic battery diagnostics and health check Cold start function (DC power on) Emergency Power Off function Load segmentation for priority load assignment UPS Management Software included for monitoring and auto shutdown SNMP/Relay card connectivity available as option Standard RS232 serial communication with USB port as option Conform to IEC61000-4, FCC Part 15 and CISPR 22 design standard 6kVA / 8kVA / 10kVA / 12kVA / 15kVA / 20kVA Tower and Rackmount Option EnPlus
Transcript

NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWERNATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER

Excellence as a Standard

UninterruptiblePower Supplies

• TrueOn-LineDoubleConversiontechnologyprovides fullprotectionfromallpowerproblemswithpuresine waveoutput• Protectsmissioncriticalapplicationsfromdowntime, dataloss,datacorruption,andprocessinterruptionby providingcontinuouswellreglatedcleanpower• Fullydigitalizedmicroprocessorcontrolled• LCDdisplay,LEDsdisplayforeasyviewingofreal timeoperationalstatusandcontrolparameters,power usage,batteryruntimeandetc• Audiblesoundforfaultalertcondition• Plug&Playinstallation• Userswappablebatteriesreplacement• Extendedruntimecapabilitywithexternalbattery modules

• Customdesignforlonghourback-up• AdvancedBatteryManagementsystems• Automaticbatterydiagnosticsandhealthcheck• Coldstartfunction(DCpoweron)• EmergencyPowerOfffunction• Loadsegmentationforpriorityloadassignment• UPSManagementSoftwareincludedfor monitoringandautoshutdown• SNMP/Relaycardconnectivityavailableasoption• StandardRS232serialcommunicationwith USBportasoption• ConformtoIEC61000-4,FCCPart15and CISPR22designstandard

6kVA / 8kVA / 10kVA / 12kVA / 15kVA / 20kVATower and Rackmount Option

EnPlus

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.52 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no

Excellence as a Standard

NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWERNATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER NATURALGREENPOWER

Astrid Electronics (SEA) Pte Ltd Astrid Electronics (SEA) Sdn Bhd www.astridsea.com

Astrid Electronics (SEA) Pte Ltd Astrid Electronics (SEA) Sdn Bhd www.astridsea.com

EnPlus6kVA / 8kVA / 10kVA / 12kVA / 15kVA / 20kVA Tower & Rackmount

TECHNICAL DATA POWER RATING Nominal Output Power (VA) 6000 8000 10000 12000 15000 20000 Nominal Output Power (W) 4200 5600 7000 8400 10500 14000 Systems Topology On-line, double conversion topology with automatic bypass

INPUTPhase Single phase three wires or three phases five wires (8-20KVA) Bypass Voltage 184-265 VAC (user selectable)

Input Voltage Range 120/140/160/180 VAC-276 VAC (Single phase) 208/242/277/312 VAC-478 VAC (Three phase)

Frequency 50/60 Hz. Auto selection Frequency Window from mains 45-65 Hz

Synchronization Window +/- 3 Hz

Input Current (Single phase input) 23A 30.7A 38.3A 46A 57.5A 76.6A Input Current (Three phase input) N.A 10.2A 12.8A 15.3A 19.2A 25.5A

Input Power Factor > 0.98 (1ph,3W), > 0.95 (3ph, 5W)

OUTPUT Output Voltage 208/220/230/240 VAC, selectable form LCD panel

Voltage Regulator +/- 2%

Voltage Distortion <3% for linear load, <5% for non-linear load Frequency Regulation +/-0.25 Hz (battery or free funning mode)

Dynamic Response +/-9% max for 20% to 100% or 100% to 20% load step

Overload Capacity 110-125% 1 min, 126-150% 10sec Efficiency > 88%

BATTERY AND CONNECTION Connection Input

Connection Output Hardwired

Hardwired

Battery Type 7.2Ah/12V 7.2Ah/12V 34W/12V 7.2Ah/12V 7.2Ah/12V 9Ah/12V

Number of Batteries 20 20X2

Backup Time/Full load (min) 7 4 5 7 4 4

Recharge Time (to 90%) < 4 hours to 90%

Dimension (WxDxH) mm w/o Isolation tx 257x590x 570 257 x 690 x 715 342x690x878 342 x 863 x 905

Dimension (WxDxH) mm w/ Isolation tx 257x590x700 342 x 690 x 715 342x690x878 342 x 863 x 905

Dimension (WxDxH) mm RM 6U 428x597x260 428 x 658 x 260 Not Available

Weight (KG) w/o Isolation tx 86 112 130

24

66 68

175

Weight (KG) w/ Isolation tx 123 178 180 180 225

Weight (KG) - RM 3U Power Module 20 Not Available

Not Available Weight (KG) - RM 3U Battery Module 66

ENVIRONMENTAL Ambient Temperature +0 C°to +40 C° , Recommended +15 C°to +25 C° Storage temperature -15 C° to +50 C°Cooling Force air cooling

Humidity <95%, non-condensing Audible Noise (dBA) <55 dBA on normal and battery mode STANDARDS Safety UL 1778, CE (20000VA) Emissions IEC61000-4, FCC Part 15, CISPR22

Astrid Electronics (SEA) Pte Ltd

Astrid Electronics (SEA) Sdn Bhd www.astridsea.com

Specifications subject to change without notice

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.52 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no

Recommended