TRIUMPH TIGER 800 XC / 800 XR (18 > 19) KR6401 Specific rear rack for MONOKEY® top-case maximum load allowed 6 kg / MONOKEY® plate included / it is necessary to puncture the housing behind the saddle KRA6401 Specific rear rack in anodised aluminium for MONOKEY® top-case maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case / you must puncture the housing in arranged sections 1 / 4
Transcript
TRIUMPH TIGER 800 XC / 800 XR (18 > 19)
KR6401 Specific rear rack for MONOKEY® top-case
maximum load allowed 6 kg / MONOKEY® plate included / it isnecessary to puncture the housing behind the saddle
KRA6401 Specific rear rack in anodised aluminium for MONOKEY® top-case
maximum load allowed 6kg / it does not allow the assembly of the stoplight kit or the remote control device on the case / you must puncturethe housing in arranged sections
1 / 4
TRIUMPH TIGER 800 XC / 800 XR (18 > 19)
KLR6413 Specific rapid release side-case holder for MONOKEY® or RETROFIT cases
KL6413CAM Specific pannier holder for MONOKEY® CAM-SIDE
18 mm diameter
KTL8705KIT Specific kit to install the KS250 Tool Box on KLR6413
to be combined with KS250 and KLR6413 / needs to mounted on theleft-hand side of the motorcycle
BF02K Specific flange for fitting the tank bags with TANKLOCK system
2 / 4
TRIUMPH TIGER 800 XC / 800 XR (18 > 19)
KD6413ST Specific screen, transparent 58,5 x 43,5 cm (H x W)
to be mounted instead of the original screen / 14,5 cm higher than theoriginal
KN6409 Specific engine guard, black
25 mm diameter steel tube / we recommend fitting by a qualifiedmechanic
KMG6401 Specific ABS mudguard, black colour
LS6413K Specific fitting kit to mount spotlights
only for Tiger 800 XC
3 / 4
TRIUMPH TIGER 800 XC / 800 XR (18 > 19)
01SKITK Specific kit to mounting the KS900A Smart Bar
