Equipment and Componentsfor the
RF & Microwave Industry
Passive Components
Active Components
Connectors, Cable and Cable Assemblies
Oscillators
Satellite CommunicationsEquipment
Noise Generators
Custom Equipment
Sub-Assemblies
EquipmentThe AtlanTec brand provides our customers withcomplete equipment solutions in either 19" rack chassis,bench mount instruments or modular form.
Whether the requirement is for a suite of satellitecommunications equipment, a radar test set or part of a radio astronomy receiver, you can count on the AtlanTecbrand to fulfil your system requirements. It may be eithera solution to an outline specification or a fully participativeventure or simply a requirement for build-to-print.
ComponentsFrom attenuators and amplifiers through connectors,couplers, isolators, mixers and power dividers to VCOsand zero bias Schottky detectors, there is a wealth ofchoice available, all bearing the AtlanTec stamps of valueand quality with stock delivery in many cases.
But AtlanTec means much more than standard when itcomes to our speciality lines of stabilised and phaselocked oscillators, our PC programmable sources, ourfrequency converters, multi-function modules and ourability to provide custom solutions with engineeringexcellence.Customer Service
Customer service is paramount, with a personalapproach being applied to every product enquiry.Technical support is available around the world throughany of our carefully selected and technically competentsales offices and distributors. We are willing to considerentering into long term supply agreements with ourcustomers and provide a stocking scheme tailored totheir production needs.
Quality AssuranceAll of our materials, sub-contractors and suppliers are verycarefully chosen to provide our customers with the valuethey need and expect. Our in-house systems and processesare all to BS EN ISO 9001:2000 and are constantly updatedto accommodate today’s challenges in product reliability.
DeliveryAs a customer-oriented company, you can be assured ofour ability to deliver. Much of our standard componentoffering can be delivered from stock in the DC to 50 GHzfrequency range with same-day dispatch available.
Introduction
Research & DevelopmentFrom our R&D base we constantly strive to provide state-of-the-art technology at an affordable cost and tested forsuitability for the environments, both civil and military, inwhich it is to be applied. New products are regularlyreleased and details can be found on our websitewww.AtlanTecRF.com.
AtlanTec is a brand name of Atlantic Microwave Ltd., one of theUK’s leading suppliers of equipment and components to themicrowave and RF industry.
With over 25 years experience as a microwave component supplier,Atlantic Microwave Ltd. has very significantly expanded its productrange and capability over the years to include both standard andcustom equipment as well as multi-function modules, sub-assemblies and super-components.
Sound engineering principles, innovative solutions, qualitymanufacturing, top value products and excellent customer serviceare all key ingredients of the AtlanTec range, available from ourheadquarters and R&D base in Braintree, England.
Page(s)
Section 1 Satellite Communications EquipmentLoop Test Translators 4 & 5Satellite Communication Line Amplifiers 6 & 7
Section 2 Broadband Noise GeneratorsBroadband Noise Generators 8 & 9
Section 3 OscillatorsPLO - Internal reference APL - 02 Series 10 & 11PLO - External reference APL - 03 Series 12 & 13PLO - with Translator 5MHz or 10MHz External reference APL - 05 Series 14 & 15High Stability PLO - Internal reference APL - 06 Series 16 & 17Stabilised Oscillators - CRO & DRO 18 & 19PC Programmable Sources - ANS2 Series 20PC Programmable Sources - ANS3 Series 21Voltage Controlled Oscillators (V.C.O.) 22 & 23
Section 4 Active ComponentsMiniature Amplifiers - Drop-In 24 & 25
Section 5 Passive ComponentsCoaxial Isolators - Standard Bands ACI-20000 Series 26Coaxial Circulators - Standard Bands ACC-20000 Series 27Directional Couplers - Octave Band 28Directional Couplers - Broadband 29Directional Couplers - High Power 3090° Hybrid 3dB Couplers 31Directional Couplers - Multi-Octave 32Communication Band Couplers 33Two Way Power Dividers / Combiners A8000 Series 34Four Way Power Dividers / Combiners A8000 Series 35Eight Way Power Dividers / Combiners A8000 Series 36Broadband Power Dividers / Combiners BPD Series 37Attenuators - SMA & 2.92mm 38Attenuators - N, TNC, BNC, 7mm 39Coaxial Attenuators - 2 Watt BAS & BBS Series - SMA & 2.92mm 40Coaxial Attenuators - 2 Watt CAS Series - SMA 41Tunnel Diode Detectors 42Zero Bias Schottky Detectors 43
Section 6 Cable, Connectors & Cable AssembliesCoaxial Cable Semi-Flex & Semi-Rigid 44Coaxial Cable - Low Loss - Semi-Flex & Semi-Rigid 45
INDEX
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Index
Certificate No. 3875 3
The ALT series of Loop Test Translators are designed to replace thesatellite link for test and alignment of earth station systems operating inS, C, X, Ku or DBS frequency bands. Incorporating fundamentalfrequency phase locked oscillators and double balanced mixers, thetranslators block convert frequencies from uplink to either downlink orL-band for instantaneous monitoring of frequency, power levels andmodulation. The input path contains a front panel controlledcontinuously variable attenuator for reducing input power levels. Eachunit also provides a reference frequency output and LO lock alarm.
Details of models and frequency ranges overleaf.
We reserve the right to change standard product specifications without notice butwill be pleased to consider control drawings for quotation.
LOOP TEST TRANSLATORS
● S, C, X, Ku & DBS Bands● Simulates Satellite Link● High Stability● Low Phase Noise● Gain Adjustment● Reference Output● 1U Rack Height● Custom Options
General Specifications (also see options)Maximum Input Level +10dBmConversion Gain -20dB nom.Conversion Flatness +/-2dB typ.
+/-0.5dB/40MHz max.Attenuation Range 30dB min.Impedance 50 ohmsInput VSWR 1.8:1 typ.Output VSWR 1.8:1 typ.LO Frequency Stability +/-5ppm max. over 0+50C
+/-2ppm typ. over +10+40C+/-2ppm/day max.
Internal Reference 25 or 50MHz standardReference Output As internal referenceSignal Related Spurious -50dBc typ.LO Related Spurious -50dBm typ.Input Power 80-240V, 50-60HzInput Power Connector IEC with fuseOperating Temperature 0+50CStorage Temperature -40+85CAttenuation Control 10 turn with dial, front panelLock Alarm LED, front panelRF Input Connector SMA female, rear panelRF Output Connector SMA female, rear panelRef. Monitor Connector SMA female, rear panelSize 19” x 1U x 13.5” (343mm)
including connectors & protrusions
Options:-
00 - Standard
01 - 10MHz Internal Reference02 - 50 MHz External Reference03 - 10 MHz External Reference04 - High Stability OCXO Internal Reference
with Frequency Adjustment
11 - Switchable External LO12 - Exclusive External LO
21 - 0dB Conversion Gain
31- Step Attenuator 0-69dB in 1dB steps(instead of continuously variable)
41 - Type N Female input connector42 - Type N Female output connector
Custom Options:-
Multi-Band UnitsFiltered OutputModular ConstructionPortable Units
Phase Noise (dBc/Hz) (typical)
Offset Frequency
(Hz)
100
1K
10K
100K
1M
650
-80
-115
-130
-135
-140
1750
-73
-105
-125
-125
-140
3050
-65
-100
-115
-115
-135
5100
-60
-92
-105
-112
-125
7400
-56
-90
-100
-110
-120
13050
-53
-85
-95
-105
-115
LO Frequency (MHz)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 1Satellite Communications Equipment4
Model
Number
ALT-0175-S
ALT-1075-S
ALT-2225-C
ALT-4975-C
ALT-7375-CI
ALT-0650-X
ALT-6950-X
ALT-1800-Ku
ALT-2050-Ku
ALT-11800-Ku
ALT-1750-KuE
ALT-2300-KuE
ALT-2800-KuE
ALT-3050-KuE
ALT-12800-KuE
ALT-1750-Ku
ALT-2300-Ku
ALT-2550-Ku
ALT-3050-Ku
ALT-13050-Ku
ALT-5100-DBS
ALT-5178-DBS
ALT-5600-DBS-A
ALT-5600-DBS-B
ALT-5600-DBS-C
ALT-7400-DBS
ALT-16350-DBS-A
ALT-16350-DBS-B
ALT-16350-DBS-F
ALT-16850-DBS
ALT-17150-DBS
Translation
Bands
S-S
S-L
C-C
C-L
C-L(inv)
X-X
X-L
Ku-Ku
Ku-Ku
Ku-L
KuE-Ku
KuE-Ku
KuE-Ku
KuE-Ku
KuE-L
Ku-Ku
Ku-Ku
Ku-Ku
Ku-Ku
Ku-L
DBS-DBS
DBS-DBS
DBS-DBS
DBS-DBS
DBS-DBS
DBS-DBS
DBS-L
DBS-L
DBS-L
DBS-L
DBS-L
Input
Frequency Range
(MHz)
2025-2125
2025-2125
5845-6425
5925-6425
5925-6425
7900-8400
7900-8400
12750-13250
12750-13250
12750-13250
13750-14500
13750-14500
13750-14500
13750-14500
13750-14500
14000-14500
14000-14500
14000-14500
14000-14500
14000-14500
17300-17800
17300-17800
17300-17800
17300-18100
17800-18100
18100-18400
17300-17800
17300-18100
17300-18400
17800-18100
18100-18400
Output
Frequency Range
(MHz)
2200-2300
950-1050
3620-4200
950-1450
1450-950
7250-7750
950-1450
10950-11450
10700-11200
950-1450
12000-12750
11450-12200
10950-11700
10700-11450
950-1700
12250-12750
11700-12200
11450-11950
10950-11450
950-1450
12200-12700
12122-12622
11700-12200
11700-12500
12200-12500
10700-11000
950-1450
950-1750
950-2050
950-1250
950-1250
LO
Frequency
(MHz)
175
1075
2225
4975
7375
650
6950
1800
2050
11800
1750
2300
2800
3050
12800
1750
2300
2550
3050
13050
5100
5178
5600
5600
5600
7400
16350
16350
16350
16850
17150
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 1Satellite Communications Equipment
5
The ALS series of Satellite Communication Line Amplifiers are designedto compensate for losses in microwave and RF signal paths, eitherbetween system components and across site or as a driver for highpower transmission amplifiers. The amplifiers operate in specific C, X,Ku, DBS and Ka uplink or downlink frequencies and some multi-bandmodels provide the versatility of covering both up and down linkfrequencies. Alternatively, some models cover more than one linkfrequency regime.
A range of options is available, some of which will affect thespecifications given in the table. Please contact the factory for fulldetails regarding any particular design.
We reserve the right to change standard product specifications without notice butwill be pleased to consider control drawings for quotation.
SATELLITE COMMUNICATIONLINE AMPLIFIERS
● L, C, X, Ku, DBS, Ka Bands
● Multi-Bands
● Driver & Cross Site
● Flat Response
● 1U Rack Height
● Custom Options
General Specifications (also see options)Impedance 50 ohmsMaximum Input Level +20 dBmGain Flatness +/-0.5 dB typ. in any 500MHzThird Order Intercept +30 dBm typ.Saturation Output Power 2 dB typ. above 1dB GCPInternally Generated Spurious -70 dBc typ.Operating Temperature Range -10+50CNoise Figure Specification @ +25CInput & Output Connectors Rear panel (see table)Option 01 RF Monitor Connector Rear panel (see table)Option 12 Detector Output Rear panel, BNC femaleOptional Attenuator Control 10 turn knob with dialA.C. Input Power 80-240V, 50-60HzInput Power Connector IEC with fuse, rear panelPower On/Off with Indicator Front panelSize 19” x 1U x 13.3” (343mm)
including connectors & protrusions
Options:-
00 - Standard
01 - 30 dB Output Coupler with RF Monitor Port02 - Two Outputs @ +20 dBm each03 - Three Outputs @ +20 dBm each04 - Four Outputs @ +20 dBm each
21 - 30 dB Variable Input Attenuator22 - 30 dB Variable Output Attenuator23 - Output Monitor Detector24 - 30 dB Gain (min)25 - 40 dB Gain (min)26 - +23 dBm output @ 1dB GCP (min)27 - Input Isolator (1.25:1 VSWR, subject to bandwidth)28 - Output Isolator (1.25:1 VSWR, subject to bandwidth)
31 - Type N Female Input Connector (18 GHz max)32 - Type N Female Output Connector (18 GHz max)33 - Type N Female RF Monitor Connector (18 GHz max)
Custom Options:-
Custom Frequency RangeCustom Gain ProfileCable Loss Gain EqualisationTWT Slope Gain EqualisationFiltered OutputHigher Output Power to 10 watts (not 1U rack)Switched Channel OutputsRemote Gain ControlMultiple InputsPortable UnitsModular Construction
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 1Satellite Communications Equipment6
Model
Number
ALS-000002
ALS-000020
ALS-009017
ALS-009020
ALS-036042
ALS-036064
ALS-058064
ALS-072077
ALS-072084
ALS-079084
ALS-107127
ALS-107147
ALS-117145
ALS-122145
ALS-127132
ALS-127145
ALS-137-145
ALS-036145
ALS-072145
ALS-107184
ALS-173184
ALS-177212
ALS-280310
Satcom
Band
I.F.
I.F. & L
L
L
C
C
C
X
X
X
Ku
Ku
Ku
Ku
Ku
Ku
Ku
C, X & Ku
X & Ku
Ku & DBS
DBS
Ka
Ka
Frequency Range
(GHz)
0.01 - 0.20
0.01 - 2.00
0.95 - 1.70
0.95 - 2.05
3.62 - 4.20
3.62 - 6.425
5.845-6.425
7.25 - 7.75
7.25 - 8.4
7.9 - 8.4
10.7 - 12.75
10.7 - 14.5
11.7 - 14.5
12.25 - 14.5
12.75 - 13.25
12.75 - 14.5
13.75 - 14.5
3.62 - 14.5
7.25 - 14.5
10.7 - 18.4
17.3 - 18.4
17.7 - 21.2
28.0 - 31.0
Gain
dB (nom)
30
30
30
30
30
25
25
25
25
25
20
20
20
20
20
20
20
20
20
20
20
20
20
Output
@1dB GCP
dBm (min)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Noise
Figure
dB (typ)
8
8
8
8
3
3
3
4
4
4
5
5
5
5
5
5
5
6
6
6
6
7
8
VSWR
Input/Output
(typ)
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
2.5:1
Connectors
Input/Output
& RF Monitor
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
SMA f
2.92mm f
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 1Satellite Communications Equipment
7
The ANG series of general purpose noise generators provide up to 1watt of white Gaussian noise output in several models over the 10Hzto 18GHz frequency range, with custom options to 40GHz and aredesigned to be used either as laboratory instruments or as built-insystems test facilities.The noise, which is diode generated, is amplified and the level can bevaried in 1dB steps from 0 to 10dB or optionally in 0.1dB steps from 0to 111dB. Further standard options are available in addition to the ability to provide custom solutions for particular applications.
We reserve the right to change standard product specifications without notice butwill be pleased to consider control drawings for quotation.
BROADBAND NOISE GENERATORS
● 10Hz - 18GHz
● High Output, Up to +30dBm
● White Symmetrical Gaussian Noise
● Test Instrument
● Flat Output
● Fine Attenuation Control
● Standard and Custom Options
General SpecificationsAttenuator Ranges 0 to 10dB in 1dB steps (standard)
0 to 100dB in 10dB steps0 to 1.0dB in 0.1dB steps
RF Output Connector SMA femaleFront Panel RF Output
Attenuator Control KnobsOn/Off Switch
Rear Panel IEC AC Power ConnectorAC Power SwitchAC Fuse
Operating Temperature -10+50CSpecification Temperature +25CInput Power 80-240V @ 50/60HzInstrument Size 14.6 (370) x 4.4 (110) x 11.8 (300) ins. (mm)
Plus Carry/Tilt Handle
Options:-
Note:- Standard Attenuator0-10dB in 1dB steps for frequencies up to 2GHz.0-9dB in 1dB steps for frequencies over 2GHz.
OPTION01A Alternative 100dB attenuator in 10dB steps
(for frequencies up to 2 GHz)01B Alternative 60dB attenuator in 10dB steps
(for frequencies over 2 GHz)02A Additional 100dB attenuator in 10dB steps
(for frequencies up to 2 GHz)02B Additional 60dB attenuator in 10dB steps
(for frequencies over 2 GHz)03 Custom A.C. Input.04 Signal combiner input. (6dB signal & noise loss)05 Marker input06 19" x 2U rack mount.07 N female output connector.08 BNC female output connector.
(for frequencies up to 2 GHz only)09 75 ohm impedance (6dB loss)
(for frequencies up to 2 GHz only)10 Additional 1dB attenuator in 0.1dB steps
(for frequencies up to 2 GHz only)
Custom variations include:-
Frequency RangeOutput PowerAlternative ConnectorsD.C. Input PowerDual OutputsSignal Input AttenuatorContinuously Variable AttenuatorsDigitally Remote Controlled AttenuatorsFiltered Output
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 2Broadband Noise Generators8
Model
Number
ANG-1601
ANG-1603
ANG-1605
ANG-1607
ANG-1608
ANG-1609
ANG-1610
ANG-1612
ANG-1624
ANG-2618
ANG-1801
ANG-1803
ANG-1805
ANG-1807
ANG-1808
ANG-1809
ANG-1810
ANG-1811
Frequency
Range
(GHz)
10Hz - 20KHz
10Hz - 500KHz
10Hz - 10MHz
100Hz - 100MHz
100Hz - 500MHz
100Hz - 1GHz
100Hz - 1.5GHz
1MHz - 2GHz
2GHz - 4GHz
2GHz - 18GHz
500Hz - 20KHz
500Hz - 500KHz
500Hz - 10MHz
250KHz - 100MHz
1MHz - 200MHz
1MHz - 300MHz
2MHz - 500MHz
5MHz - 1GHz
Output
Power
dBm(nom)
+13
+13
+13
+13
+10
+10
+10
0
-10
-20
+30
+30
+30
+30
+30
+30
+30
+30
Noise
Density
dBm/Hz(nom)
-30
-44
-57
-67
-77
-80
-82
-93
-103
-122
-13
-27
-40
-50
-53
-55
-57
-60
Output
Flatness
±dB(typ)
0.5
0.5
0.8
1.0
1.5
2.0
2.0
2.5
2.5
3.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
Output
Impedance
Ohms (nom)
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 2Broadband Noise Generators
9
PHASE LOCKED OSCILLATORSInternal Reference APL - 02 Series
● 300 MHz to 14 GHz
● Fundamental Frequency (CRO or DRO)
● Internal Reference
● Small Size
● Low Phase Noise
● Low Microphonics
● Low Current
● Custom Design
The APL - 02 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in a phase locked loop with an internal crystalreference. Circuit design uses SMT devices including Si bipolar activedevices up to 3 GHz and GaAs FET active devices above 3 GHz. Theoutput contains a buffer amplifier for improved ruggedness, higheroutput power and a wider range of load VSWR. The PLOs also have areference monitor output. DRO types have an external tuning screw forfactory set up only.
General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzFrequency Stability +/-5ppm max. over 0+50C
(see options)Output Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 300mA max. (for +13dBm)Operating Temperature 0+50C standard (see options)Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Monitor Connector SMA female
Phase Noise (dBc/Hz) (typical)
Offset Frequency
(Hz)
100
1K
10K
100K
1M
0.6
-80
-115
-130
-135
-140
1.5
-73
-105
-125
-125
-140
3.0
-66
-100
-115
-115
-135
4.0
-64
-95
-110
-115
-135
10.0
-56
-90
-100
-110
-120
14.0
-53
-85
-95
-105
-115
Output Frequency (GHz)
Options:-
00 - Standard, based on 50 MHz internal crystal.Frequency Stability/Temperature01 - +/-5ppm max. over -10+60C02 - +/-5ppm max. over -20+70C03 - +/-10ppm max. over -40+85C04 - +/-2ppm max. over +10+40COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16 V23 - +28V d.c.
Custom Options:-
Higher Output Frequency to 30 GHz (multiplied)Higher Output Power to +30dBm (amplified)Higher Stability to +/- 0.05ppm (OCXO)Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply
We reserve the right to change standard productspecifications without notice, but will be pleased toconsider control drawings for quotation.
Model Numbers
Examples: -APL-02-13.050-0013.05GHz PLO with standard specifications
APL-02-10.750-02-11-2310.75GHz PLO with +/-5ppm over -20+70C, +16dBm and +28V.
Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz A3.0 - 6.0 GHz B6.0 - 14.0 GHz A
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators10
0 0
0.35(8.9)
0.68 (17.3)
0.84 (21.3)
1.00 (25.4)
1.12 (28.5)
1.67(42.4)
2.25 (57.2)
0.62(15.8)
0.39(9.9)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
2.16
(54
.9)
0.09
(2.
3)
2.25
(57
.2)
0.44(11.2)
0.19 (4.8)
0.13 (3.3) max
XTAL MON. OUT SMA
SMA
L/A
Vcc
GND
RFOUT
TUNE(SEE NOTE 1)
NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY
POSITIONS MAY VARY
OUTLINE A USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz
OV
OV
0 0
0.35 (8.9)
1.67 (42.4)
0.75(19.1)
0.39(9.9)
0.57(14.5)
XTAL MON. OUT SMA
SMA
L/A
Vcc
GND
RFOUTTUNE
(SEE NOTE 1)
OUTLINE B USED ON: DRO - PLOs: 3.0 TO 6.0 GHz
0.68 (17.3)
0.84 (21.3)
1.00 (25.4)
1.12 (28.5)
2.25 (57.2)
0.19 (4.8)
0.13 (3.3) max
2.16
(54
.9)
0.09
(2.
3)
2.25
(57
.2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
NOTE 1: FACTORY SET UP ONLY POSITIONS MAY VARY
ALL DIMENSIONS ARE IN INCHES (mm)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
11
● 300 MHz to 14 GHz● Fundamental Frequency (CRO or DRO)● External Reference● Small Size● Low Phase Noise● Low Microphonics● Low Current● Custom Design
The APL - 03 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in a phase locked loop for use with an externalreference. Circuit design uses SMT devices including Si bipolar activedevices up to 3 GHz and GaAs FET active devices above 3 GHz. Theoutput contains a buffer amplifier for improved ruggedness, higheroutput power and a wider range of load VSWR. DRO types have anexternal tuning screw for factory set up only.
Reference Frequency Notes:-The output frequency must be an integral multiple of the reference frequency.Reference level required 0+/-3dBm
At offset frequencies up to 100KHz, the output phase noise is degraded from that of the reference oscillator by approximately 20logN+3dB, where N is the ratio of theoutput to the reference frequency.
PHASE LOCKED OSCILLATORSExternal Reference APL - 03 Series
General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzReference Frequency 25 - 200 MHz (see notes)Frequency Stability Reference dependentOutput Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 300mA max. (for +13dBm)Operating Temperature 0+50C standard (see options)Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Input Connector SMA female
Phase Noise (dBc/Hz) (typical)
Offset Frequency
(Hz)
100
1K
10K
100K
1M
0.6
-135
-140
1.5
-125
-140
3.0
-115
-135
4.0
-115
-135
10.0
-110
-120
14.0
-105
-115
Output Frequency (GHz)
Options:-
00 - StandardOperating Temperature01 - -10+60C02 - -20+70C03 - -40+85COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16V23 - +28V d.c.
Custom Options:-
Higher Output Frequency to 30GHz (multiplied)Higher Output Power to +30dBm (amplified)Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply
We reserve the right to change standard productspecifications without notice, but will be pleased toconsider control drawings for quotation.
Model Numbers
Examples: -APL-03-13.050-50-0013.05GHz PLO with standardspecifications and 50MHz ref.
APL-03-10.750-50-02-11-2310.75GHz PLO with 50MHz ref.,-20+70C, +16dBm and +28V
Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz A3.0 - 6.0 GHz B6.0 - 14.0 GHz A
Reference Dependent - See Notes
Reference Dependent - See Notes
Reference Dependent - See Notes
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators12
0 0
0.35(8.9)
0.68 (17.3)
0.84 (21.3)1.00 (25.4)
1.12 (28.5)
1.67(42.4)
2.25 (57.2)
0.62(15.8)
0.39(9.9)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
2.16
(54.
9)
0.09
(2.3
)
2.25
(57.
2)
0.44(11.2)
0.19 (4.8)
0.13 (3.3) max
REF.IN SMA
SMA
L/A
Vcc
GND
RFOUT
TUNE(SEE NOTE 1)
NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY POSITIONS MAY VARY
OUTLINE A USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz
OV
0 0
0.35 (8.9)
1.67 (42.4)
0.75(19.1)
0.39(9.9)
0.57(14.5)
SMA
SMA
L/A
Vcc
GND
RFOUTTUNE
(SEE NOTE 1)
OUTLINE B USED ON: DRO - PLOs: 3.0 TO 6.0 GHz
OV
0.68 (17.3)
0.84 (21.3)1.00 (25.4)
1.12 (28.5)
2.25 (57.2)
0.19 (4.8)
0.13 (3.3) max
2.16
(54.
9)
0.09
(2.3
)
2.25
(57.
2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
REF.IN
NOTE 1: FACTORY SET UP ONLY POSITIONS MAY VARY
ALL DIMENSIONS ARE IN INCHES (mm)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
13
The APL - 05 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in dual phase locked loops for use with an external5MHz or 10MHz reference. Circuit design uses SMT devices including Si bipolar active devices up to 3 GHz and GaAs FET active devicesabove 3 GHz. The output contains a buffer amplifier for improvedruggedness, higher output power and a wider range of load VSWR.DRO types have an external tuning screw for factory set up only.
PHASE LOCKED OSCILLATORS with TRANSLATOR5MHz or 10MHz External Reference APL - 05 Series
● 300 MHz to 14 GHz● Fundamental Frequency (CRO or DRO)● External Reference● Small Size● Low Phase Noise● Low Microphonics● Low Current● Custom Design
General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzReference Frequency 5 MHz or 10 MHzFrequency Stability Reference dependentOutput Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 400mA max. (for +13dBm)Operating Temperature 0+50C standard (see options)Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Input Connector SMA female
Reference Frequency Notes:-Reference level required 0+/-3dBmAt offset frequencies up to 100Hz, the output phase noise is degraded from that of the reference oscillator by approximately 20logN+6dB, where N is the ratio of the outputto the reference frequency.
Options:-
00 - StandardOperating Temperature01 - -10+60C02 - -20+70C03 - -40+85COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16V23 - +28V d.c.
Custom Options:-
Higher Output Frequency to 30GHz (multiplied)Higher Output Power to +30dBm (amplified) Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply
We reserve the right to change standard productspecifications without notice, but will be pleased toconsider control drawings for quotation.
Model Numbers
Examples: -APL-05-13.050-10-0013.05GHz PLO with standardspecifications and 10MHz ref.
APL-03-3.750-5-02-11-233.75GHz PLO with 5MHz ref., -20+70C,+16dBm and +28V.
Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz C3.0 - 6.0 GHz D6.0 - 14.0 GHz C
Phase Noise (dBc/Hz) (typical & based on 50MHz internal crystal)
Offset Frequency
(Hz)
100
1K
10K
100K
1M
0.6
-115
-130
-135
-140
1.5
-105
-125
-125
-140
3.0
-100
-115
-115
-135
4.0
-95
-110
-115
-135
10.0
-90
-100
-110
-120
14.0
-85
-95
-105
-115
Output Frequency (GHz)
Reference Dependent - See Notes
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators14
0
0.25 (6.4)
0.51 (13.0)0.60 (15.2)
0.95 (24.1)
1.14 (29.0)
1.67(42.4)
2.25 (57.2)
0.90(22.9)
0.74(18.8)
0.70(17.8)
0.44(11.2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
2.16
(54
.9)
0.09
(2.
3)
2.25
(57
.2)
0.22 (5.6)
0.13 (3.3) max
SMA
SMA
L/A
Vcc OSC
Vcc
GND
RF OUT
REF IN
TUNE(SEE NOTE 1)
NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY POSITIONS MAY VARY
OUTLINE C USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz
OV
0
1.38 (35.1)
1.03(26.2)
0.87(22.1)
0.83(21.1)
0.57(14.5)
SMA
SMA
L/AVcc OSC
Vcc
GND
RF OUT
REF IN
OUTLINE D USED ON: DRO - PLOs: 3.0 TO 6.0 GHz
OV
TUNE(SEE NOTE 1)
NOTE 1: FACTORY SET UP ONLY POSITIONS MAY VARY
2.16
(54
.9)
0.09
(2.
3)
2.25
(57
.2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
1.14(29.0)
1.67(42.4)
00
0.25 (6.4)
0.51 (13.0)0.60 (15.2)
0.95 (24.1)
2.25 (57.2)
0.22 (5.6)
0.13 (3.3) max
1.38 (35.1)
ALL DIMENSIONS ARE IN INCHES (mm)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
15
The APL - 06 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in a phase locked loop with an internal high stabilityOCXO reference. Circuit design uses SMT devices including Si bipolaractive devices up to 3 GHz and GaAs FET active devices above 3 GHz. The output contains a buffer amplifier for improved ruggedness,higher output power and a wider range of load VSWR. The PLOs alsohave an OCXO reference monitor output. DRO types have an externaltuning screw for factory set up only.
HIGH STABILITY PHASE LOCKEDOSCILLATORSInternal Reference APL - 06 Series
● 300 MHz to 14 GHz● Very High Stability● Fundamental Frequency (CRO or DRO)● Internal Reference (OCXO)● Low Phase Noise● Low Microphonics● Low Current● Custom Design
General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzFrequency Stability +/-0.05ppm max. over -20+60C
+/-0.005ppm/day typ. at despatch+/-0.5ppm/year max.
Output Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 600mA max. (for +13dBm)Operating Temperature -20+60C Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Monitor Connector SMA female
Options:-
00 - Standard, based on 50 MHz internal OCXO.Output Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16 V23 - +28V d.c.
Custom Options:-
Higher Output Frequency to 30 GHz (multiplied)Higher Output Power to +30dBm (amplified)Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply
We reserve the right to change standard productspecifications without notice, but will be pleased toconsider control drawings for quotation.
Model Numbers
Examples: -APL-06-13.050-0013.05GHz PLO with standard specifications
APL-06-10.750-11-2310.75GHz PLO with +16dBm and +28V.
Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz G3.0 - 6.0 GHz H6.0 - 14.0 GHz G
Phase Noise (dBc/Hz) (typical)
Offset Frequency
(Hz)
10
100
1K
10K
100K
1M
0.6
-63
-93
-117
-125
-135
-140
1.5
-55
-85
-109
-117
-125
-140
3.0
-49
-79
-103
-111
-115
-135
4.0
-47
-77
-101
-109
-115
-135
10.0
-39
-69
-93
-101
-110
-120
14.0
-36
-66
-90
-98
-105
-115
Output Frequency (GHz)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators16
0
0.25 (6.4)
0.51 (13.0)
0.62 (15.7)
0.95 (24.1)
1.38 (35.1)
1.67 (42.4)
2.25 (57.2)
1.37(34.8)
0.92(23.4)
0.44(11.2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
2.16
(54
.9)
0.09
(2.
3)
2.25
(57
.2)
0.22 (5.6)
0.13 (3.3) max
SMA
SMAL/A
Vcc
GND
RF OUT
REF MON
TUNE(SEE NOTE 1)
OUTLINE G PLO WITH INTERNAL OCXO USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz
OV
SMA
SMAL/A
Vcc
GND
RF OUT
REF. MON
OUTLINE H PLO WITH INTERNAL OCXO USED ON: DRO - PLOs: 3.0 TO 6.0 GHz
OV
2.16
(54
.9)
0.09
(2.
3)
2.25
(57
.2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places2.25 (57.2)
NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY
POSITIONS MAY VARY
NOTE 1: FACTORY SET UP ONLY POSITIONS MAY VARY
0
0.25 (6.4)
0.51 (13.0)
0.62 (15.7)
0.95 (24.1)
1.38 (35.1)
1.67 (42.4)
2.25 (57.2)
1.50(38.1)
1.05(26.7)
0.57(14.5)
0.22 (5.6)
0.13 (3.3) max
TUNE(SEE NOTE 1)
ALL DIMENSIONS ARE IN INCHES (mm)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
17
The ACR and ADR series of fundamental frequency stabilised
oscillators utilise coaxial resonators (CRO) to 3GHz and dielectric
resonators (DRO) to 14 GHz. Circuit design uses SMT devices
including Si bipolar active devices up to 3 GHz and GaAs FET active
devices above 3 GHz. The output contains a buffer amplifier for
improved ruggedness, higher output power and a wider range of load
VSWR. DRO types have an external tuning screw for factory set up
and limited mechanical tuning.
STABILISED OSCILLATORS - CRO & DRO
● 300 MHz to 14 GHz● Fundamental Frequency (CRO or DRO)● Small Size● Low Phase Noise● Low Microphonics● Low Current● Custom Design
General Specifications (also see options)Output Frequency (fixed) 300 MHz to 14.0 GHz(see options for tuning)Frequency Stability300 MHz to 3.0 GHz (CRO) +/-10ppm/degC max.3.0 GHz to 14.0 GHz (DRO) +/-5ppm/degC max.Output Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Spurious -80dBc max.Frequency Pulling +/-1MHz max. @ 1.7:1VSWRFrequency Pushing +/-1MHz/V max.Input Voltage +15V d.c. (see options)Input Current 125mA max. (for +13dBm)Mechanical Tuning (DRO only) 1% typ.Operating Temperature 0+50C standard (see options)Storage Temperature -40+85C
Options:-
00 - StandardOperating Temperature01 - -10+60C02 - -20+70C03 - -40+85COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22 - Regulated +11 to +16 V23 - +28V d.c.Electrical Tuning31- Electrical Tuning for 0 - 12V
300 MHz to 3.0 GHz (CRO) 0.5% typ.3.0 GHz to 14.0 GHz (DRO) 0.2% typ.
Custom Options:-
Higher Output Frequency to 30 GHz (multiplied)Higher Output Power to +30dBm (amplified)Lower Harmonics (filtered)Custom SizesInstrument or Rack Mount Housing with PowerSupply
We reserve the right to change standard productspecifications without notice, but will be pleased toconsider control drawings for quotation.
Model Numbers
Examples: -ACR-1.750-001.75 GHz CRO with standard specifications
ADR-13.050-02-11-2313.05 GHz DRO with -20+70C, +16dBm and +28V.
Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz E3.0 - 6.0 GHz F6.0 - 14.0 GHz E
Phase Noise (dBc/Hz) (typical)
Offset Frequency
(Hz)
1K
10K
100K
1M
0.6
-95
-115
-135
-140
1.5
-85
-105
-125
-140
3.0
-75
-95
-115
-135
4.0
-75
-95
-115
-135
10.0
-70
-90
-110
-120
14.0
-65
-85
-105
-115
Output Frequency (GHz)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators18
0
0
0.57 (14.5)
0.62 (15.7)
0.40 (10.2)
1.15 (29.2)
0.62(15.7)
0.44(11.2)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places
2.25 (57.2)
0.95 (24.1)
0.27 (6.9)
1.35 (34.3)
1.85 (47.0)
1.06
(26
.9)
0.09
(2.
3)
1.15
(29
.2)
0.13 (3.3) max
SMA
(SEE NOTE 1)Vcc OSC
(SEE NOTE 2)VT Vcc AmpGND
RF OUTTUNE
(SEE NOTE 3)
NOTE 1: OMITTED ON CROs
NOTE 2: OMITTED FOR CROs & DROs WITHOUT ELECTRICAL TUNING
NOTE 3: OMITTED FOR CROs POSITIONS MAY VARY FOR DROs
OUTLINE E USED ON: CROs: 0.3 TO 3.0 GHz DROs: 6.0 TO 14.0 GHz
0
0
0.57 (14.5)
0.75 (19.1)
0.53 (13.5)
1.15 (29.2)
0.75(19.1)
0.57(14.5)
2.16 (54.9)
0.09 (2.3)
0.11 (2.8) thru 4 places
2.25 (57.2)
0.95 (24.1)
0.27 (6.9)
1.35 (34.3)
1.85 (47.0)
1.06
(26
.9)
0.09
(2.
3)
1.15
(29
.2)
0.13 (3.3) max
SMA
Vcc OSC(SEE NOTE 1)
VT Vcc AmpGND
RF OUTTUNE
(SEE NOTE 2)
NOTE 1: OMITTED FOR DROs WITHOUT ELECTRICAL TUNING
NOTE 2: POSITIONS MAY VARY
OUTLINE F USED ON: DROs: 3.0 TO 6.0 GHz
ALL DIMENSIONS ARE IN INCHES (mm)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
19
The ANS2 series of programmable, synthesised RF signal sources featureboth frequency and level control and, with a standard office PC, provide aturn-key solution to the provision of variable frequency sources for bothsystems and test equipment applications.Directly connecting to the PC parallel port, each unit can be set tofrequencies within a typical 1.5:1 range and at levels up to +10dBm via aneasy to use control panel software and the non-volatile memory enablesthe selected settings to be retained in the stand alone unit.Each unit contains a +/-1ppm stability reference TCXO but can also beused with an external reference. The sources are supplied complete withan 18V d.c. wall mount power supply, operating software and specialinterface cable.
PC PROGRAMMABLE SOURCES - ANS2 Series
● 45 MHz to 2500 MHz● Frequency & Level Control● Directly PC Programmable● +10 dBm Output Power● +/-1 ppm Stability● Low Cost & Compact Size● Wide Tuning Ranges● Low Phase Noise● Non-Volatile Memory● Buffered RF Output● Turn-key Operation
General Specifications (also see options)Output Frequency 45 MHz to 2500 MHz in rangesFrequency Stability +/-1ppm max. over 0+50CInternal Ref. Aging +/-1ppm/yearInternal Ref. Accuracy +/-1ppm @ +23 +/-1deg.CInternal Ref. Frequency 10 MHz for 25, 50 & 100 KHz step models
9.6 MHz for 30 KHz step modelsInternal Ref. Output 0 to +2dBm into 50 ohmsExternal Ref. Frequency Up to 40 MHz depending on modelExternal Ref. Level 0.6-2.5 VppExternal Ref. Impedance 600 ohms in parallel with 25pFReference Select Miniature Toggle SwitchOutput Power +8dBm min., +10dBm typ.Level Control Range 25dB min in 31 stepsInput Voltage +17 to +24 V d.c. @ 110 mAOperating Temperature 0+50C (see options)Storage Temperature -20+70CLock Time 2 to 6 msec typ.Status LEDs (green) RF On, Phase Lock, DC AppliedRF Output Connector SMA femaleRef. Connector SMA femaleInput Power Connector 1.3 x 9.0mm centre positive jackData Connector DB-9PRF Output Modes Continuous, Momentary & ToggledOutput Impedance 50 ohmsSize 90 x 70 x 20mmWeight 170gHousing Aluminium with Black Epoxy Paint
Equipment Supplied as Standard
Synthesised SourcePower Supply (Euro, UK or US style)Control Software (CD)Special Parallel Port CableOperating Manual (CD)Spare DC Connector
PC Requirements
IBM compatible 386 or higher PCRunning Windows 3.1 or higher4-8 MB RAM5MB Hard Disk SpaceCD Rom640 x 480 Res. Monitor25 Pin, D-Sub, EPP or SPP Parallel Port
Custom Options:-
Delete Power SupplyCustom Frequency Range (subject to restrictions)Custom Step Size (subject to restrictions)Wider Temperature Range (-20+65C with +/-2ppm & +7dBm)Mounting PlateInstrument or Rack Mounting inSingle or Multiple Units
We reserve the right to changestandard product specificationswithout notice, but will be pleased toconsider control drawings forquotation.
Model Freq. Freq. Freq. Output Harmonics Spurious Phase Noise(typ) Current
No. Range Steps Stability Power(typ) @1KHz @10KHz @100KHz @+18V d.c.
MHz KHz ppm dBm dBc dBc dBc/Hz dBc/Hz dBc/Hz mA
ANS2-0045-025 45 - 65 25 ±1 +10 -35 -60 -80 -100 -115 110
ANS2-0065-050 65 - 95 50 ±1 +10 -35 -60 -80 -100 -115 110
ANS2-0080-050 80 - 120 50 ±1 +10 -35 -60 -80 -100 -115 110
ANS2-0110-100 110 - 160 100 ±1 +10 -35 -60 -80 -95 -110 110
ANS2-0160-100 160 - 220 100 ±1 +10 -35 -60 -75 -85 -110 110
ANS2-0220-100 220 - 320 100 ±1 +10 -35 -60 -75 -85 -110 110
ANS2-0320-100 320 - 500 100 ±1 +10 -35 -60 -70 -80 -110 110
ANS2-0500-100 500 - 800 100 ±1 +10 -35 -60 -70 -75 -110 110
ANS2-0800-030 800 - 1200 30 ±1 +10 -35 -60 -65 -75 -110 110
ANS2-0800-100 800 - 1200 100 ±1 +10 -35 -60 -65 -75 -110 110
ANS2-1000-100 1000 - 1500 100 ±1 +10 -35 -60 -65 -75 -110 110
ANS2-1500-100 1500 - 2000 100 ±1 +10 -35 -60 -60 -75 -110 110
ANS2-1700-100 1700 - 2200 100 ±1 +10 -35 -60 -60 -70 -105 110
ANS2-2000-100 2000 - 2500 100 ±1 +10 -35 -60 -60 -70 -105 110
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators20
The ANS3 series of programmable, synthesised RF signal sourcesfeature frequency and level control with modulation and, with astandard office PC, provide a turn-key solution to the provision ofvariable frequency sources for both systems and test equipmentapplications.Directly connecting to the PC serial port, each unit can be set tofrequencies within ranges listed below and at levels up to 8dBmvia an easy to use control panel software and the non volatilememory enables the selected settings to be retained in the standalone unit.Each unit contains a +/-1ppm stability reference TCXO but canalso be used with an external reference. The sources are suppliedcomplete with a 9V d.c. wall mount power supply, operatingsoftware and special interface cable.
PC PROGRAMMABLE SOURCES - ANS3 Series
● 800 MHz to 5875 MHz● Frequency & Level Control● With Modulation/Trigger● Directly PC Programmable - RS232● 1KHz Steps● 8dBm Output Power● +/-1 ppm Stability● Low Cost & Compact Size● Wide Tuning Ranges● Low Phase Noise● Non-Volatile Memory
General Specifications (also see options)Output Frequency 800 MHz to 5875 MHz in rangesFrequency Stability +/-1ppm max. over 0+50CInternal Ref. Aging +/-1ppm max./yearInternal Ref. Accuracy +/-1ppm @ +23 +/-2 deg.CInternal Ref. Frequency 10 MHzInternal Ref. Output 0 to +2dBm into 50 ohmsExternal Ref. Frequency Up to 40 MHz depending on modelExternal Ref. Level 0.6-2.5 VppExternal Ref. Impedance 600 ohms in parallel with 25pFReference Select Miniature Toggle SwitchOutput Power +5dBm min., +8dBm typ.Level Control Range 25dB min in 31 stepsControl Interface Serial RS-232Modulation Rate 1 KHz internal
50KHz max. externalModulation Deviation +/-1.25 MHzInput Voltage +9 to +15 V d.c. @ 175 mAOperating Temperature 0+50CStorage Temperature -20+70CLock Time 2 to 6 msec. typ.Status LED’s (green) RF On, Phase Lock, DC AppliedRF Output Connector SMA femaleRef. Connector SMA femaleTrigger/Modulation Connector SMA femaleInput Power Connector 1.3 x 9.0mm centre positive jackData Connector DB-9PRF Output Modes Continuous, Momentary & ToggledOutput Impedance 50 ohmsSize 102 x 70 x 19mmWeight 170gHousing Aluminium with White Epoxy Paint
Model
No.
Freq.
Range
MHz
Freq.
Steps
KHz
Freq.
Stability
ppm
Output
Power (typ)
dBm
Harmonics
dBc
Spurious
dBc
@1KHz
dBc/Hz
@10KHz
dBc/Hz
@100KHz
dBc/Hz
Current
@+9V d.c.
mA
Phase Noise (typ)
ANS3-0800-001
ANS3-1200-001
ANS3-1750-001
ANS3-2400-001
ANS3-3400-001
ANS3-3700-001
ANS3-5150-001
ANS3-5470-001
800-1200
1200-2000
1750-2500
2400-3400
3400-3700
3700-4200
5150-5350
5470-5875
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
±1
±1
±1
±1
±1
±1
±1
±1
+8
+8
+8
+8
+8
+8
+8
+8
-35
-35
-35
-35
-35
-35
-35
-35
-60
-60
-60
-60
-60
-60
-60
-60
-77
-73
-72
-72
-70
-67
-67
-61
-80
-82
-82
-78
-78
-75
-75
-71
-106
-105
-108
-102
-109
-103
-103
-96
175
175
175
175
175
175
175
175
Equipment Supplied as Standard
Synthesised SourcePower Supply (Euro, UK or US style)Control Software (CD)Special Serial Port CableOperating Manual (CD)Spare DC Connector
PC Requirements
Pentium, Equivalent or HigherRunning Windows 95 or higher16 MB RAM25 MB Hard Disk SpaceCD Rom9 Pin, D-Sub, Serial Port
Custom Options:-
Delete Power SupplyCustom Frequency Range(subject to restrictions)Custom Step Size (subject to restrictions)Mounting PlateInstrument or Rack Mounting inSingle or Multiple Units
We reserve the right to changestandard product specificationswithout notice, but will be pleasedto consider control drawings forquotation.
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
21
VOLTAGE CONTROLLED OSCILLATORS(V.C.O.)
Model
No.
AV - 106 - 206AV - 116 - 226AV - 226 - 506AV - 306 - 506AV - 406 - 806
AV - 506 - 856AV - 506 - 107AV - 606 - 127AV - 756 - 157AV - 107 - 207
AV - 127 - 187AV - 157 - 307AV - 207 - 407AV - 227 - 407AV - 257 - 507
AV - 307 - 457AV - 327 - 647AV - 357 - 457AV - 407 - 457AV - 407 - 607
AV - 407 - 707AV - 407 - 807AV - 457 - 517AV - 507 - 907AV - 507 - 108
AV - 607 - 108AV - 667 - 128AV - 687 - 148AV - 707 - 148AV - 707 - 108
AV - 807 - 148AV - 807 - 168AV - 807 - 967AV - 907 - 168AV - 907 - 188
AV - 957 - 148AV - 108 - 148AV - 108 - 188AV - 108 - 208AV - 128 - 208
AV - 138 - 238AV - 148 - 218AV - 158 - 258AV - 178 - 198AV - 208 - 308
AV - 208 - 328AV - 238 - 308AV - 248 - 378AV - 258 - 408AV - 278 - 338
AV - 308 - 358AV - 308 - 408AV - 368 - 428AV - 368 - 438
Frequency
Range
(MHz)
10 - 2011 - 2525 - 5030 - 5040 - 80
50 - 8550 - 10060 - 12075 - 150
100 - 200
120 - 175150 - 300200 - 400225 - 400250 - 500
300 - 450320 - 640350 - 450400 - 450400 - 600
400 - 700400 - 800450 - 512500 - 900
500 - 1000
600 - 1000660 - 1200680 - 1360700 - 1400750 - 1000
800 - 1400800 - 1600806 - 960
900 - 1600900 - 1800
950 - 13501000 - 14001000 - 18001000 - 20001200 - 2000
1300 - 23001400 - 21001500 - 25001700 - 19002000 - 3000
2000 - 32002300 - 30002400 - 37002500 - 40002700 - 3300
3000 - 35003000 - 40003600 - 42003600 - 4300
Tuning
Voltage
(Vdc)
+20+20+20+15+20
+15+20+20+20+20
+15+20+20+18+20
+13+20+12+10+12
+18+20+4
+18+20
+18+18+20+20+12
+14+20+4
+15+20
+15+10+18+20+20
+20+18+18+4
+18
+18+18+18+18+15
+10+19+10+10
Frequency
Pulling@12dB
R/L(MHz Typ.)
0.51.02.02.02.0
2.02.02.02.53.0
3.05.08.08.08.0
10.010.010.010.010.0
12.014.010.015.017.0
17.017.017.017.017.0
17.020.020.020.020.0
20.020.020.020.025.0
25.025.030.012.030.0
35.030.030.035.030.0
35.040.035.035.0
Frequency
Pushing
(MHz/V)
0.10.10.20.30.3
0.30.30.30.30.5
0.51.02.02.02.0
2.02.52.52.02.0
2.02.04.04.04.0
4.04.04.06.06.0
6.06.06.06.07.0
7.07.07.08.08.0
8.08.08.06.08.0
12.08.0
10.012.010.0
12.015.015.015.0
Harmonics
(dBc Max)
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10-10
-10-10-10-10
Ouput
Power
(dBm Min)
+11+11+11+11+11
+11+11+11+11+10
+10+10+10+10+10
+10+10+10+10+10
+10+10+7
+10+10
+10+10+10+10+10
+10+10+7
+10+10
+10+10+10+10+10
+10+10+10+5
+10
+10+10+10+10+10
+10+10+10+10
Voltage
(Vdc)
+12+12+12+12+12
+12+12+12+12+12
+12+12+12+12+15
+15+15+15+15+15
+15+15+5
+15+15
+15+15+15+15+15
+15+15+5
+15+15
+15+15+15+15+15
+15+15+15+5
+15
+15+15+15+15+15
+15+15+15+15
Current
(mA Max)
2525252525
2525252525
2525353535
3535353535
3535353535
3535353535
3535353535
3535353535
3535353535
3535353535
35353535
Phase Noise
@100 KHz
(dBc/Hz Typ.)
-125-125-125-125-125
-125-125-125-125-125
-125-125-125-125-123
-123-121-123-123-120
-120-118-120-117-117
-115-115-113-115-115
-113-113-115-113-113
-113-112-112-112-112
-110-110-110-110-106
-105-103-103-103-105
-100-100-100-100
● 10 MHz to 12.0 GHz● Miniature Size● Hyper Abrupt● Low Noise● Choice of Package
General SpecificationsOperating Temp Range
Standard -20 +70COptional -55 +85C
Frequency Variation with Temperature 0.03%/deg. C typ.Power Variation with Temperature 0.01dB/deg. C typ.Specifications are at +25C case temperature
Input Power
From 4.0 GHz to 12.0 GHz please advise details of your requirement for a specific quotation.
Aternative Packages - See Reverse,Surface Mount, Flat-Pack, Connectorised, Hermetic
0.300 (7.6)TYP.
0.450(11.4)
0.150(3.8)TYP.
0.500(12.7)
P3
P1
P2 P4
0.10 (2.5)DIA.
CLEARANCE
0.150(3.8)MIN.
0.017(.45)
0.030(.76)
0.170(4.3)
Metal case isgrounded and bright
electro tin plated
This areais ground
P1 = VccP2 = VtP3 = GNDP4 = RF OUT
BOTTOM VIEW
All dimensions in inches (mm)
TO-8 PACKAGE
Custom Options:-
1. Aternative Input Voltages; 5 to 20V 2. Negative Tuning Voltage or Dual Polarity 3. High Reliability ScreeningPlease contact us for any other special requirements
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators22
~
~
0.500(12.7)
0.500(12.7) 0.180
(4.6)
0.000
0.100(2.5)
0.200(5.1)
0.300(7.6)
0.400(10.2)
0.500(12.7)SEE
NOTE1
0.50
0(1
2.7)
0.38
5(9
.8)
0.28
5(7
.3)
0.18
5(4
.7)
0.08
5(2
.2)
0.00
0
0.000
0.115(2.9)
0.215(5.5)
0.315(8.0)
0.415(10.5)
0.500(12.7)
0.50
0(1
2.7)
0.42
0(1
0.7)
0.32
0(8
.1)
0.22
0(5
.6)
0.12
0(3
.0)
0.00
0
SEENOTE
2 SEENOTE
3
SEE DETAIL
(Metal Case)
0.060 (1.5)
0.095 (2.4)
0.130 (3.3)
0.060 (1.5)
DETAIL VIEW
BOTTOM VIEWSIDE VIEWTOP VIEW
MS PACKAGE
PINASSIGNMENTSP1 VtP2 RF OUTP3 Vcc
0.500(12.7)
0.500(12.7) 0.180
(4.6)
SEENOTE
1
SEE DETAIL
(Metal Case)
0.060 (1.5)
0.095 (2.4)
0.130 (3.3)
0.060 (1.5)
DETAIL VIEW
BOTTOM VIEWSIDE VIEWTOP VIEW
SM PACKAGE
SMA PACKAGE
PINASSIGNMENTSP1 RF OUTP2 VtP3 Vcc
0.000
0.150(3.8)
0.250(6.4)
0.350(8.9)
0.00
0
0.35
0(8
.9)
0.25
0(6
.4)
0.15
0(3
.8)
SEE NOTE 3
SEE NOTE 2
NOTE1. The metal case is composed of nickel and is soldered to the grounded surface of the VCO.2. This area is a grounded surface and is solder plated and reflowed.3. Radial surfaces are plated vias to feed thru ground, Vcc, VT, and RF out.
0.62
0(1
5.7)
1.12
5(2
8.6)
0.00
0
0.00
0
0.26
0(6
.6)
0.62
0(1
5.7)
0.00
0
0.36
0(9
.1)
1.050(26.7)
0.000
0.525(13.3)
1.050(26.7)
0.000
0.850(21.2)
0.36
0(9
.1)
0.00
0
0.16
0(1
4.1)0.98
5(2
5.0)
0.00
0
0.14
0(3
.6)
1.12
5(2
8.6)
1.050 (26.7)
0.000
0.140 (3.6)
0.910 (23.1)MTG HOLES2.56 x 0.15 DEEP4 PLACES
PART NUMBERING
Model NoPackage Style
AV - 106 - 206 - MS
Vcc
Gnd
Vt
P3
P1
P2
P3
P1P2
RF
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 3Oscillators
23
MINIATURE AMPLIFIERS - DROP-IN
● 1.8 - 26.0 GHz● Miniature Size● Cascadable● Removable Connectors● High Reliability● Open/Short Protected● Internal Voltage Regulator● Reverse Voltage Protected● Unconditionally Stable● 2 Year Warranty
ALL DIMENSIONS ARE IN INCHES (mm)Custom frequency ranges, specifications and configurations arealso available. We reserve the right to change standard product specificationswithout notice but will be pleased to consider control drawings forquotation.
Gain
dB(min)
Gain
Flatness
± dB(max)
Output
@1dB GCP
dBm(min)
Noise
Figure
dB(max)
Input
Voltage
Vdc(typ)
Input
Current
mA
Fig.Model
No.
Freq.
Range
(GHz)
VSWR
Input & Output
AGM-1001AGM-1002AGM-1003AGM-1004
AGM-1005AGM-1006AGM-1007AGM-1008
AGM-1009AGM-1010
AGM-2001AGM-2002AGM-2003AGM-2004
AGM-2005AGM-2006AGM-2007AGM-2008
AGM-2009AGM-2010AGM-2011AGM-2012
AGM-2013AGM-2014
AGM-3001AGM-3002AGM-3003AGM-3004
AGM-3005AGM-3006AGM-3007AGM-3008
AGM-3009AGM-3010AGM-3011AGM-3012
1.8-2.42.0-6.04.0-8.04.0-8.0
8.0-12.08.0-12.09.0-10.0
12.0-18.0
13.75-14.5018.0-26.0
2.0-4.03.7-4.24.4-5.05.3-5.9
5.9-6.45.9-6.46.4-7.27.1-7.7
7.25-7.757.0-11.08.0-12.08.0-12.0
12.0-18.013.75-14.5
2.0-4.02.0-4.04.0-8.04.0-8.0
5.9-6.48.0-10.08.0-12.0
10.5-15.0
12.7-13.212.4-18.0
13.75-14.513.75-14.5
9.015.07.0
12.0
10.010.09.08.5
9.04.5
22.014.014.014.0
14.027.014.014.0
25.015.016.024.0
18.018.0
40.048.032.045.0
40.033.035.020.0
20.024.020.027.0
15.016.027.020.0
20.012.010.020.0
20.010.0
9.030.030.030.0
30.020.030.030.0
10.010.017.020.0
20.020.0
20.019.020.019.0
20.010.020.020.0
13.017.020.018.0
5.03.57.03.5
5.02.52.55.0
5.05.0
2.78.08.08.0
8.05.08.08.0
4.56.04.55.0
6.05.0
3.03.04.04.0
5.04.05.05.0
2.74.55.05.0
2.0:12.0:12.0:12.0:1
2.0:12.0:12.0:12.0:1
2.0:12.0:1
2.0:12.0:12.0:12.0:1
2.0:12.0:12.0:12.0:1
2.0:12.0:12.0:12.0:1
2.0:12.0:1
2.0:12.0:12.0:12.0:1
2.0:12.0:12.0:12.0:1
2.0:12.0:12.0:11.5:1
1.8:11.8:11.8:11.8:1
1.8:11.8:11.5:11.8:1
1.5:11.8:1
1.8:11.8:11.8:11.8:1
1.8:11.5:11.8:11.8:1
1.5:11.8:11.8:11.8:1
1.8:11.5:1
1.8:11.8:11.8:11.8:1
1.5:11.8:11.8:11.8:1
1.5:11.8:11.5:11.4:1
9-159-15
12-159-15
9-159-159-159-15
9-159-15
9-1512-1512-1512-15
12-159-15
12-1512-15
9-159-159-159-15
9-159-15
9-159-159-159-15
9-159-159-159-15
9-159-159-159-15
6565
23080
801006080
8080
100900900900
900160900900
150180240160
180160
400220325220
250160250225
200220225175
S-1S-1C-1C-1
X-1X-1X-1X-1
X-1X-1
S-2S-2C-2C-2
C-2C-2C-2C-2
C-2X-2X-2X-2
X-2X-2
S-3S-3C-3C-3
C-3X-3X-3X-3
X-3X-3X-3X-3
0.750.750.750.75
0.750.750.750.75
0.50.75
1.01.01.01.0
1.00.751.01.0
1.01.01.01.0
1.00.75
1.51.51.51.5
1.01.51.51.5
1.01.51.01.0
(max)
The AGM series of miniature amplifiers utilise thin film and MMIC technology to provide very versatile and reliable gain modules for microwaveapplications in communications, radar and defence equipment. Each amplifier can be used either as a modular unit with the SMA female connectorsfitted or inserted directly into a microwave assembly with the connectors removed. In addition to the standard models listed, custom units can beoffered to meet the requirements of specific applications.Specification Temperature +25C Operating Temperature -55+85C Baseplate
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 4Active Components24
G
+VDC
RFIN
RFOUT
MOUNTING HOLES.07 (1.8) THRU, 2 PLCS
REMOVABLE SMATO MIL-C-39012, 2 PLCS
AH
C
F B
DE
.06 (1.55)
+VDC
MOUNTING HOLES.07 (1.8) THRU, 4 PLCS
REMOVABLE SMATO MIL-C-39012, 2 PLCS
AE
G
.061 (1.5)
C
F RFIN
RFOUT
H
D
B
+VDC
MOUNTING HOLES.07 (1.8) THRU, 4 PLCS
REMOVABLE SMATO MIL-C-39012, 2 PLCS
A
G
C
F RFIN
RFOUT
H
E
B
D
1 STAGE AMPLIFIERA B C D E F G H
S-1 .57(14.5) .99(25.1) .22(5.6) .63(16.0) .27(6.9) .86(21.8) .29(7.4) .10(2.5)
C-1 .57(14.5) .96(24.4) .22(5.6) .52(13.2) .31(7.9) .83(21.1) .29(7.4) .10(2.5)
X-1 .50(12.7) .78(19.8) .22(5.6) .38(9.7) .27(6.9) .65(16.5) .25(6.4) .10(2.5)
2 STAGE AMPLIFIERA B C D E F G H
S-2 .906(24.4) .990(25.1) .22(5.6) .630(16.0) .334(8.5) .868(22.0) .286(7.3) .10(2.5)
C-2 .906(24.4) .956(24.3) .22(5.6) .524(13.3) .334(8.5) .834(21.2) .234(6.0) .10(2.5)
X-2 .760(19.3) .766(19.5) .22(5.6) .381(9.7) .260(6.6) .654(16.6) .250(6.4) .10(2.5)
3 STAGE AMPLIFIERA B C D E F G H
S-3 1.239(31.5) .990(25.1) .22(5.6) .630(16.0) .270(6.9) .868(21.9) .667(16.9) .10(2.5)
C-3 1.239(31.5) .960(24.4) .22(5.6) .524(13.3) .312(25.4) .834(21.2) .667(16.9) .10(2.5)
X-3 1.02(25.9) .776(19.7) .22(5.6) .381(9.7) .275(7.0) .654(16.6) .520(13.2) .10(2.5)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 4Active Components
25
COAXIAL ISOLATORS - STANDARD BANDSACI-20000 Series
● 800 MHz – 23 GHz
● Octave & Standard Bands
● Compact Design
● Internal Load
● Fast Delivery
● SMA Connectors
The ACI-20000 series of coaxial isolators aredesigned for low power applications incommunications, test & measurement and scientificresearch applications requiring good RF performancein a compact and economic package.
Part NumberingACI-20010 -X-X
Model NumberInput ConnectorOutput ConnectorConnector Types
SF=SMA FemaleSM=SMA Male
B
CA
Input Output
General SpecificationsIsolator Load Internal 50 ohmHousing Material Aluminium AlloyMagnet Cover Plates Nickel Plated SteelConnectors Gold PlatedStandard Connectors SMA FemaleConnector Options SMA Male
Also Available :-Higher Input Power and Load Rating.3 Port Standard Band Circulators to 23GHz, ACC-20000 Series.Narrow Band High Performance Isolators & Circulators.Waveguide Isolators and Circulators to 40GHz.Drop-In and Microstrip Isolators and Circulators to 26GHz.
Custom frequency ranges, specifications and configurations may also be reviewed forquotation. These are often just as economic as standard models but may not be in stock.To obtain a quotation for a custom isolator please provide details of the specificationrequired, as follows:-Frequency Range, Isolation, Insertion Loss, VSWR, Input Power, Load Rating,Temperature Range, Input & Output Connectors plus any additional relevant parameters.
We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.
IsolatorModel
No.
Freq.RangeGHz
Isolation
dB (min)
InsertionLoss
dB (max)
VSWR
:1 (max)
ForwardPowerWatts
OperatingTemperature
deg. C A B C
Dimensions (mm)
ACI-20010ACI-20020ACI-20030ACI-20040ACI-20050
ACI-20060ACI-20070ACI-20080ACI-20090ACI-20100
ACI-20110ACI-20120ACI-20130ACI-20140ACI-20150
ACI-20160ACI-20170ACI-20180ACI-20190ACI-20200
ACI-20210ACI-20220ACI-20230ACI-20240ACI-20250
ACI-20260ACI-20270ACI-20280ACI-20290ACI-20300
0.8-1.20.95-1.450.95-1.951.0-2.01.2-1.7
1.7-2.42.0-4.02.2-2.72.5-3.52.7-3.2
3.0-6.03.4-4.24.0-8.05.8-6.55.85-6.725
6.0-12.07.25-7.757.9-8.48.0-9.58.0-12.0
8.0-16.08.0-18.08.5-9.610.0-15.010.7-12.75
12.0-18.013.75-14.515.0-18.017.3-18.421.2-23.6
1816141720
2018202020
1720182320
1823232018
1816232023
1723202020
0.60.70.70.70.6
0.50.60.50.60.4
0.60.40.60.30.4
0.60.30.30.350.5
0.61.00.350.50.4
0.50.40.50.50.5
1.31.41.551.351.2
1.21.351.21.251.2
1.41.21.351.21.2
1.351.21.21.21.35
1.351.41.21.31.2
1.31.21.31.251.25
2020202020
205
202020
105555
555
105
55555
55
2010
5
LoadRatingWatts
55
1055
51555
21111
11111
11111
11522
-30+65-30+65-20+55-30+65-30+65
-30+65-10+65-30+65-10+40-30+65
-10+55-10+65-25+65-35+65-10+60
-30+65-30+65-30+65-10+60-30+65
-30+65-30+65
0+70-20+60-30+65
-20+60-30+65-30+65-30+65-30+65
50.040.064.068.034.0
32.032.032.028.025.0
25.416.020.016.016.0
12.012.012.012.012.0
12.015.012.012.012.0
12.012.012.012.013.0
54.050.076.072.039.0
39.034.039.036.029.5
34.526.026.026.026.0
20.020.020.020.020.0
20.023.020.020.020.0
20.020.020.020.019.0
24.021.026.028.022.0
20.018.020.019.015.0
13.015.014.013.015.0
13.013.013.013.013.0
13.013.013.013.013.0
13.013.013.013.010.0
Dimension B Includes Load
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 5Passive Components26
COAXIAL CIRCULATORS - STANDARD BANDSACC-20000 Series
● 800 MHz – 23 GHz
● Octave & Standard Bands
● Compact Design
● Internal Load
● Fast Delivery
● SMA Connectors
The ACC-20000 series of coaxial isolators aredesigned for low power applications incommunications, test & measurement andscientific research applications requiring good RFperformance in a compact and economic package.
Part NumberingACC-20010 -X-X-X
Model NumberConnector 1Connector 2Connector 3Connector Types SF=SMA Female
SM=SMA Male
B
CA
1 2
3
General SpecificationsHousing Material Aluminium AlloyMagnet Cover Plates Nickel Plated SteelConnectors Gold PlatedStandard Connectors SMA FemaleConnector Options SMA Male
Also Available :-Higher Input Power.Standard Band Isolators to 23GHz, ACI-20000 Series.Narrow Band High Performance Isolators & Circulators.Waveguide Isolators and Circulators to 40GHz.Drop-In and Microstrip Isolators and Circulators to 26GHz.
Custom frequency ranges, specifications and configurations may also be reviewed forquotation. These are often just as economic as standard models but may not be in stock.To obtain a quotation for a custom circulator please provide details of the specificationrequired, as follows:-Frequency Range, Isolation, Insertion Loss, VSWR, Input Power, Temperature Range, Connectors plus any additional relevant parameters.
We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.
IsolatorModel
No.
Freq.RangeGHz
Isolation
dB (min)
InsertionLoss
dB (max)
VSWR
:1 (max)
ForwardPowerWatts
OperatingTemperature
deg. C A B C
Dimensions (mm)
ACC-20010ACC-20020ACC-20030ACC-20040ACC-20050
ACC-20060ACC-20070ACC-20080ACC-20090ACC-20100
ACC-20110ACC-20120ACC-20130ACC-20140ACC-20150
ACC-20160ACC-20170ACC-20180ACC-20190ACC-20200
ACC-20210ACC-20220ACC-20230ACC-20240ACC-20250
ACC-20260ACC-20270ACC-20280ACC-20290ACC-20300
0.8-1.20.95-1.450.95-1.951.0-2.01.2-1.7
1.7-2.42.0-4.02.2-2.72.5-3.52.7-3.2
3.0-6.03.4-4.24.0-8.05.8-6.55.85-6.725
6.0-12.07.25-7.757.9-8.48.0-9.58.0-12.0
8.0-16.08.0-18.08.5-9.610.0-15.010.7-12.75
12.0-18.013.75-14.515.0-18.017.3-18.421.2-23.6
1818151720
2018202020
1720182320
1823232018
1816232023
1723202020
0.60.50.60.70.6
0.50.60.50.60.4
0.60.40.60.30.4
0.60.30.30.350.5
0.61.00.350.50.4
0.50.40.50.50.5
1.31.251.41.351.2
1.21.351.21.251.2
1.41.21.351.21.2
1.351.21.21.21.35
1.351.41.21.31.2
1.31.21.31.251.25
2020202020
205
202020
105555
555
105
55555
55
2010
5
-30+65-30+65-20+55-30+65-30+65
-30+65-10+65-30+65-10+40-30+65
-10+55-10+65-25+65-35+65-10+60
-30+65-30+65-30+65-10+60-30+65
-30+65-30+65
0+70-20+60-30+65
-20+60-30+65-30+65-30+65-30+65
50.068.080.068.034.0
32.032.032.028.025.0
25.416.020.016.016.0
12.012.012.012.012.0
12.015.012.012.012.0
12.012.012.012.013.0
50.068.080.068.034.0
32.032.032.028.025.0
25.416.020.016.016.0
12.012.012.012.012.0
12.015.012.012.012.0
12.012.012.012.013.0
24.028.028.028.022.0
20.018.020.019.015.0
13.015.014.013.015.0
13.013.013.013.013.0
13.013.013.013.013.0
13.013.013.013.010.0
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 5Passive Components
27
DIRECTIONAL COUPLERS - OCTAVE BAND
● 0.5 - 18.0 GHz● Miniature Size● High Directivity● Low VSWR● RF Shielded● Robust Construction
.25(6.4)
.375(9.5)TYP
.22(5.6)
D
0.07 (1.8)
C
A
.120 (3.0) ±.003 (.08) DIA
.25(6.4)
.38(9.7)
.19(4.8)
B
.65 (16.51) MAX
TYPE SMASTAINLESS STEEL
FEMALE CONNECTOR
General SpecificationsDesign: StriplineCircuit: PTFE BasedHousing: AluminiumConnectors: SMA to MIL-C-39012
N & TNC OptionalTemperature: -55 +105CFinish: Blue or Grey Paint
Other Finishes Optional
ALL DIMENSIONS ARE IN INCHES (mm)
Custom frequency ranges, specifications and configurations are also available.We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.
(1) Includes frequency sensitivity
Specification Temperature +25C
ModelNo.
Freq.Range(GHz)
Coupling(1)
(dB)
Freq.Sensitivity
(dB)ExcludingCoupledPower
True Pri.Line
Sec.Line
Avg.Incident(Watts)
Avg.Reflected
(Watts)
Peak(kW)
Fig.
Power
A3202-6A3202-10A3202-20A3202-30
A3203-6A3203-10A3203-20A3203-30
A3204-6A3204-10A3204-20A3204-30
A3245-6A3245-10A3245-20A3245-30
A3205-6A3205-10A3205-20A3205-30
A3206-6A3206-10A3206-20A3206-30
A3267-6A3267-10A3267-20A3267-30
A3207-6A3207-10A3207-20A3207-30
0.5 - 10.5 - 10.5 - 10.5 - 1
1 - 21 - 21 - 21 - 2
2 - 42 - 42 - 42 - 4
2.6 - 5.22.6 - 5.22.6 - 5.22.6 - 5.2
4 - 84 - 84 - 84 - 8
7 - 12.47 - 12.47 - 12.47 - 12.4
7.5 - 167.5 - 167.5 - 167.5 - 16
12.4 - 1812.4 - 1812.4 - 1812.4 - 18
6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25
6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25
6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25
6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25
6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25
6 ± 1.0010 ± 1.0020 ± 1.0030 ± 1.00
6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25
6 ± 1.0010 ± 1.0020 ± 1.0030 ± 1.00
± 0.60± 0.75± 0.75± 0.75
± 0.60± 0.75± 0.75± 0.75
± 0.60± 0.75± 0.75± 0.75
± 0.60± 0.75± 0.75± 0.75
± 0.60± 0.75± 0.75± 0.75
± 0.50± 0.50± 0.50± 0.50
± 0.60± 0.75± 0.75± 0.75
± 0.50± 0.50± 0.50± 0.50
0.200.200.150.15
0.200.200.150.15
0.200.200.200.15
0.200.200.200.20
0.250.250.250.25
0.300.300.300.30
0.600.600.500.50
0.600.600.500.50
1.800.800.200.20
1.800.800.200.20
1.800.800.200.20
1.800.800.250.20
1.900.900.300.25
2.001.000.350.30
2.201.200.550.50
2.201.200.550.50
25252525
25252525
22222222
20202020
20202020
17171717
12121515
15151515
1.151.101.101.10
1.151.101.101.10
1.151.151.151.15
1.251.251.251.25
1.251.251.251.25
1.301.301.301.30
1.351.351.351.35
1.301.301.301.30
1.151.101.101.10
1.151.101.101.10
1.151.151.151.15
1.251.251.251.25
1.251.251.251.25
1.301.301.301.30
1.401.401.401.40
1.401.401.401.40
50505050
50505050
50505050
50505050
50505050
50505050
50505050
50505050
25
5050
25
5050
25
5050
25
5050
25
5050
25
5050
25
5050
25
5050
3333
3333
3333
3333
3333
3333
2222
1111
1112
3334
5556
7778
7778
7779
7799
7799
Directivity(dB Min)
FIG.
123456789
A
3.10 (78.8)3.10 (78.8)1.78 (45.2)1.78 (45.2)1.16 (29.5)1.16 (29.5)1.00 (25.4)1.00 (25.4)1.00 (25.4)
B
0.50 (12.7)0.55 (14.0)0.50 (12.7)0.55 (14.0)0.50 (12.7)0.55 (14.0)0.50 (12.7)0.55 (14.0)0.60 (15.3)
C
1.50 (38.1)1.50 (38.1)0.94 (23.9)0.94 (23.9)0.34 (8.6)0.34 (8.6)
N/AN/AN/A
D
N/AN/AN/AN/AN/AN/A
0.50 (12.7)0.50 (12.7)0.50 (12.7)
Insertion Loss(dB Max)
VSWR (Max)
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 5Passive Components28
DIRECTIONAL COUPLERS - BROADBAND
● 0.5 - 18.0 GHz● Miniature Size● High Directivity● Low VSWR● RF Shielded● Robust Construction
.25(6.4)
.375(9.5)TYP
F
E
D
A
DIA. H
I
.25(6.4)
TYPE SMA STAINLESS STEELFEMALE CONNECTOR
C
C/2
BJ
.65 (16.51)MAX
G
General SpecificationsDesign: StriplineCircuit: PTFE BasedHousing: AluminiumConnectors: SMA to MIL-C-39012
N & TNC OptionalTemperature: -55 +105CFinish: Blue or Grey Paint
Other Finishes Optional
ALL DIMENSIONS ARE IN INCHES (mm)
Custom frequency ranges, specificationsand configurations are also available.We reserve the right to change standardproduct specifications without notice but willbe pleased to consider control drawings forquotation.
(1) Includes frequency sensitivity(2) Coupling relative to output power(3) 2-56NC-2B x 0.12 deep
Specification Temperature +25C
ModelNo.
Freq.Range(GHz)
Coupling(1)
(dB)
Freq.Sensitivity
(dB)ExcludingCoupledPower
True Pri.Line
Sec.Line
Avg.Incident(Watts)
Avg.Reflected
(Watts)
Peak(kW)
Fig.
Power
A2023-6A2023-10A2023-20
A4224-10
A2034-6A2034-10A2034-20
A4238-10A4238-16A4238-20
A2045-6A2045-10A2045-20
A4248-6A4248-10A4248-16A4248-20
A2056-6A2056-10A2056-20
A4258-6A4258-10A4258-20
A2068-10
0.5 - 20.5 - 20.5 - 2
0.6 - 4
1 - 41 - 41 - 4
1 - 18 (2)1 - 18 (2)1 - 18 (2)
2 - 82 - 82 - 8
2 - 18 (2)2 - 18 (2)2 - 18 (2)2 - 18 (2)
4 - 12.44 - 12.44 - 12.4
4 - 184 - 184 - 18
7 - 18
6 ± 1.0010 ± 1.0020 ± 1.00
10 ± 1.00
6 ± 1.0010 ± 1.0020 ± 1.00
10 ± 1.0016 ± 1.0020 ± 1.00
6 ± 1.0010 ± 1.0020 ± 1.00
6 ± 1.0010 ± 1.0016 ± 1.0020 ± 1.00
6 ± 1.0010 ± 1.0020 ± 1.00
6 ± 1.0010 ± 1.0020 ± 1.00
10 ± 1.25
± 0.75± 0.75± 0.75
± 0.75
± 0.50± 0.50± 0.50
± 0.50± 0.50± 0.50
± 0.30± 0.30± 0.40
± 0.50± 0.50± 0.50± 0.50
± 0.30± 0.30± 0.40
± 0.50± 0.50± 0.50
± 0.75
0.350.350.35
0.40
0.350.350.40
0.900.800.80
0.500.350.40
0.900.800.800.80
0.500.500.50
0.900.800.60
0.60
2.000.900.40
0.90
2.000.900.45
1.500.900.90
2.201.000.45
2.001.300.900.90
2.201.200.55
2.001.000.70
1.10
232323
18
232323
1-12.4 12.4-18
15 1215 1215 12
202020
2-12.4 12.4-18
15 1215 1215 1215 12
171717
4-12.4 12.4-18
15 1215 1215 12
15
1.201.201.20
1.25
1.201.201.20
1.401.401.40
1.251.251.25
1.351.351.351.35
1.301.301.30
1.351.351.40
1.35
1.201.201.20
1.30
1.201.201.20
1.501.501.50
1.251.251.25
1.501.501.401.40
1.301.301.30
1.401.401.40
1.40
505050
50
505050
252525
505050
25252525
505050
252525
50
25
50
5
25
50
52025
25
50
25
2025
25
50
25
25
5
333
3
333
333
333
3333
333
333
3
112
10
334
111212
556
13131414
778
151516
9
Directivity(dB Min)
FIG.
123456789
10111213141516
A
3.60 (91.5)3.60 (91.5)2.90 (73.7)2.90 (73.7)1.78 (45.2)1.88 (47.8)1.22 (31.0)1.22 (31.0)1.00 (25.4)4.40 (111.8)3.47 (88.1)3.47 (88.1)2.10 (53.3)2.09 (53.1)1.36 (34.5)1.36 (34.5)
B
0.53 (13.5)0.60 (15.2)0.68 (17.3)0.60 (15.2)0.68 (17.3)0.60 (15.2)0.55 (14.0)0.60 (15.2)0.50 (12.7)0.60 (15.2)0.70 (17.8)0.70 (17.8)0.70 (17.8)0.70 (17.8)0.60 (15.2)0.66 (16.8)
C
0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)
0.50 (12.7)0.38 (9.7)
0.50 (12.7)0.38 (9.7)0.38 (9.7)
D
2.60 (66.0)2.60 (66.0)2.00 (50.8)2.00 (50.8)0.88 (22.4)1.00 (25.4)0.38 (9.7)0.38 (9.7)
N/A3.40 (86.4)2.00 (50.8)2.00 (50.8)1.00 (25.4)1.00 (25.4)0.50 (12.7)0.50 (12.7)
Insertion Loss(dB Max)
VSWR (Max)
E
N/AN/AN/AN/AN/AN/AN/AN/A
0.50 (12.7)N/AN/AN/AN/AN/AN/AN/A
F
0.22 (5.6)0.22 (5.6)0.34 (8.6)0.22 (5.6)0.34 (8.6)0.22 (5.6)0.22 (5.6)0.22 (5.6)0.22 (5.6)0.24 (6.1)0.26 (6.6)0.26 (6.6)0.26 (6.6)0.26 (6.6)0.26 (6.6)0.26 (6.6)
G
0.07 (1.8)0.07 (1.8)0.15 (3.8)0.07 (1.8)0.15 (3.8)0.07 (1.8)0.07 (1.8)0.07 (1.8)0.07 (1.8)0.07 (1.8)0.10 (2.5)0.10 (2.5)0.10 (2.5)0.10 (2.5)0.09 (2.3)0.09 (2.3)
H
0.12 (3.0)0.12 (3.0)0.15 (3.8)0.12 (3.0)0.15 (3.8)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)
I
N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A(3)N/A(3)N/AN/A
J
N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
0.34 (8.6)N/A
0.34 (8.6)N/AN/A
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 5Passive Components
29
DIRECTIONAL COUPLERS - HIGH POWER
● 0.5 - 12.0 GHz● 600W C.W.● 10kW Peak● RF Shielded● Robust Construction
0.60(15.24)
B
A
0.156(3.96) ± .003(.08) DIA.
SMA STAINLESS STEELFEMALE CONNECTOR
0.15(3.81)
0.74(18.8)
0.60(15.24)
0.60(15.24)
0.65 (16.51)MAX
1.10(27.94)
0.50(12.7)
0.80(20.32)
0.40(10.16)
TYPE N FEMALECONNECTOR
General SpecificationsDesign: Stripline
Circuit: PTFE Based
Housing: Aluminium
Connectors: SMA & N to MIL-C-39012
Temperature: -55 +85C
Finish: Grey Paint
Other Finishes Optional
ALL DIMENSIONS ARE IN INCHES (mm)
Custom frequency ranges, specifications and configurations are also available.We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.
(1) Includes frequency sensitivity(2) Coupling C to be selected in range 30 to 50dB
Specification Temperature +25C
Model
No.
Freq.
Range
(GHz)
Coupling
(1)
(dB)
Freq.
Sensitivity
(dB)
Fig.
A2323 - C (2)
A2303 - C (2)
A3333 - C (2)
A2336 - 35 (2)
A3334 - C (2)
A2304 - C (2)
A3345 - C (2)
A2345 - C (2)
A2305 - C (2)
A2356 - C (2)
A2306 - C (2)
A3356 - C (2)
0.5 - 2
1 - 2
1 - 4
1 - 11
1.5 - 4.5
2 - 4
2 - 8
2.6 - 5.2
4 - 8
5 - 11
7 - 11
4 - 12
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
35 ± 1.5 (2)
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
C ± 1.0 (2)
± 0.75
± 0.75
± 0.60
± 1.50
± 0.60
± 0.75
± 0.60
± 0.75
± 0.75
± 0.50
± 0.50
± 0.60
18
18
15
15
18
18
16
18
18
15
15
15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
1.15
1.15
1.20
1.30
1.20
1.20
1.30
1.20
1.30
1.30
1.30
1.30
6
4
5
5
4
2
3
2
1
1
1
2
Directivity
(dB Min)
FIG.
1
2
3
4
5
6
A
2.00 (50.8)
2.50 (63.5)
3.00 (76.2)
3.50 (88.9)
3.85 (97.8)
6.00 (152.4)
B
0.80 (20.3)
1.30 (33.0)
1.80 (45.7)
2.30 (58.4)
2.65 (67.3)
4.80 (121.9)
Insertion Loss
(dB Max)
VSWR (Max)
Primary
Line
40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com
Certificate No. 3875
Section 5Passive Components30
90° HYBRID 3dB COUPLERS
● 0.5 - 18.0 GHz● Miniature Size● High Isolation● Low VSWR● RF Shielded
D
B
C
A
0.105(2.66) ± .003(.08) DIA.
SMA ST