EQUIPMENT CATALOG 2016Preferred Pack®
1601 S. CUCAMONGA AVENUE, ONTARIO, CA 91761Phone (909) 923-9292Standar Fax (909) 923-1313
www.ExcelPackagingEquipment.com - [email protected]*Asterisk next to price means item in stock | Prices subject to change without notice
Standard Dynamics, Inc. 1800 Cliff Road E.
Suite OneBurnsville, MN 55337
StandardDynamics.com952-888-7332
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 2
Table of Contents Adhesive Tape Seal Machine…………………………………………………………….. 4 Air Pillow Machines……………………………………………………………………………. 5 Bag on a Roll Bag Sealers-Semi and Fully Automatic………………………… 6-7 Bag / Pouch Sealer (Pick, Fill and Seal Machines)……………………………... 8 Band Sealers –Vertical and Horizontal……………………………………………….. 9 Banding Machines (Paper and Plastic)………………………………………………. 10-11 BOPP/OPP/ Co-Ex Film……………………………………………………………………….. 12 Carton Sealers …………………………………………………………………………………… 13-17
Manual Adjust……………………………………………………………………………… 13-15 Automatic random with flap folding……………………………………………. 16 Hi-Speed fully automatic random……………………………………………….. 16 Carton Erectors…………………………………………………………………………… 17 Pack assist stations……………………………………………………………………… 17
CD/DVD Overwrap Machines……………………………………………………………… 18-19 Checkweighers…………………………………………………………………………………… 20-21 Clam Shell Sealers………………………………………………………………………………. 22 Conveyors …………………………………………………………………………….………….. 23-28
Power Belted, and Stainless Steel Washdown………………………………. 23 Narrow width plastic slat top or stainless steel conveyor……………. 24 Flighted conveyors and Specialty conveyors……………………………….. 25 Flexible Skatewheel, Flexible Roller and Powered Roller…………….. 26 Gravity roller curve conveyors, 90 degree gravity curve……………… 27 Straight sections of gravity roller conveyor………………………………….. 28
Cutting Machines (Hot and Cold)………………………………………………………. 29 Drop Sealer and Bag Opener………………………………………………………………. 30 Filling Equipment………………………………………………………………………………. 31-32
Auger Fillers………………………………………………………………………………….. 31 Piston Fillers…………………………………………………………………………………. 32 Friction Feeders/ Batch Counting / Collating Systems……………………… 33-34 Horizontal FFS (Form, Fill and Seal) machines………………………………….. 35-44
Entry Level………………………………………………………………………………….. 35-37 Medium Duty………………………………………………………………………………. 38 Hi Speed with Servo Drive…………………………………………………………… 39 Hi Speed horizontal FFS shrink wrapping machine…………………….. 40-41 Horizontal FFS for pouches 3 or 4 sided seal………………………………. 42-43
“I” Bar Sealers and Table Top “L” Sealers…………………………………………….44 Impulse Sealers (Hand and foot operated)………………………………………… 45-46 Induction Sealing Equipment……………………………………………………………… 47 Ink Jet System…………………………………………………………………………………... 48 L'Sealers - Fully Automatic…………………………………………………………………. 49-53
Entry level “Economy Series”………………………………………………………. 49 L’ Sealer and tunnel combination systems…………………………………… 50 Hi speed automatic L’ Sealer……………………………………………………….. 50-53
L'Sealers - Semi Automatic…………………………………………………………………. 54-58 All-in-One Chamber machines…………………………………………………….. 56
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 3
L’ Sealer –Tunnel Combination machines……………………………………. 56-58 Label Dispensers………………………………………………………………………………… 59 Label Machines…………………………………………………………………………………… 60-61 Mail Wrapper / Mail Bagging……………………………………………………………… 62 Metal Detection Equipment………………………………………………………………… 63-64 Entry level…………………………………………………………………………………… 63 Hi Quality German manufactured heads……………………………………… 64 Poly Bundlers/Sleeve Wrappers………………………………………………………… 65-67 Semi-Automatic…………………………………………………………………………… 65 Fully Automatic In-Line………………………………………………………………. 65
Fully Automatic Right angle………………………………………………………… 66-67 Ribbon Blender/Mixers…………………………………………………………………….. 68 Shrink Films (Polyolefins)………………………………………………………………….. 69 Shrink Tunnels……………………………………………………………………………………. 70-73 Shrink Banding Tunnels (For shrink bands or neck bands etc)………… 74-75 Shrink Sleeve Applicator……………………………………………………………………76-79 Steam Tunnels……………………………………………………………………………………. 80-81 Side Seal Machines……………………………………………………………………………… 82-83 Intermittent motion…………………………………………………………………….. 82 Continuous motion (High Speed-Servo Drive)……………………………… 83 Strapping Machines…………………………………………………………………………….. 84-86 Semi-Automatic…………………………………………………………………………… 84
Fully Automatic…………………………………………………………………………… 85-86 Stretch Wrapping Machines………………………………………………………………. 87-91 Tray Sealing-MAP Sealing Equipment………………………………………………… 92-96 Turntables-(Lazy Susan, Accumulation and Unscrambling)……………… 97 Twist Tie Machines……………………………………………………………………………… 98 Tying Machine…………………………………………………………………………………… 99 Vacuum Chamber Machines……………………………………………………………….. 100-101 Vacuum Sealers (Entry Level, Medium Duty and Heavy Duty)…………… 102-105 Vacuum Bags…………………………………………………………………………………….. 106 Vertical FFS (Form, Fill and Seal) machines………………………………………. 107-114
Vertical Sachet for 3 or 4 sided seal……………………………………………. 108 Vertical FFS for Liquids………………………………………………………………. 109 Weigh Scales for vertical FFS (2,4,10,14,16 and 20 heads)………….. 110-111 “Z” Bucket Elevators……………………………………………………………………. 112 Incline Feeding Conveyors………………………………………………………….. 112 Discharge Conveyors…………………………………………………………………… 112 Working Platforms……………………………………………………………………… 112 Auger Fillers……………………………………………………………………………….. 113 Volumetric Fillers……………………………………………………………………….. 113 Screw Conveyors…………………………………………………………………………. 114
Weigh Scales (Counting, Filling, Bench and Floor)…………………………….. 115-119 Weigh Fill Scales ………………………………………………………………………………. 120-121 X-Ray Inspection Equipment ……………………………………………………………… 122
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 4
ADHESIVE TAPE SEAL MACHINE
The TA-20 Adhesive Tape Machine is designed to apply a ¾” wide clear adhesive tape strip around the perimeter of any container or lid to secure it and provide a tamper evident seal. Will wrap a large variety of container sizes from 7” -14.5” (180-370mm) wide x 1” -14” (25-350mm) high *Custom sizes also available With the TA-20 tape sealing is done quickly and smoothly with production rates of up to 500 pcs per hour.
Model RETAIL
TA-20 $14,995
3/4” (18mm) wide clear adhesive tape roll, 2 mill OPP material 1,475 ft long rolls (450 meters)
$10.50
(240 roll minimum order)
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 5
AIR PILLOW MACHINE
PP-300AP Air Pillow Machine (*Free machines available to qualified customers)
The PP-300AP air pillow machine is designed for businesses who want to gain a big business advantage. Impress your customers with a clean, efficient and smart way to pack and protect your product. The PP-300AP will suit those operations that:
• Have limited space requirements or are in multi-functional work spaces• Are occasional users of larger volumes of void fill• Are low volume, small box shipper*FAST-will produce 145 (5” x 8”) bags per minute and up to 5,000 bags per roll
Specification: Electrical: 110 Volt Power: 700W Speed: 5” x8” Pillows at 140pcs/min
8” x 8” Pillows at 95 pcs/min Film: 1,600ft rolls(40micron or 1.6 mill) Dimensions: 24” x 18” x 17” Weight: 49lbs (net) / 62 lbs (gross)
Qualified customer must purchase a minimum of 8-10 rolls of air pillow film per month to receive a free machine! (minimum contract period may apply) Model RETAIL
PP-300AP In Stock
5” x 8” x 40 Micron (1.6mill) x 1,600 ft rolls $82.50*
8” x 8” x 40 Micron (1.6mill) x 1,600 ft rolls $85.50*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 6
BAGS ON A ROLL-MANUAL/AUTO BAGGING MACHINES
T-200 T-275 T-300 MODEL NO. DESCRIPTION RETAIL
T-200 Table Top Pre-Opened bags on a roll. Simply pull the bag into the loading
and sealing position to allow the bag to blow open. Insert the product and press
a footswitch or guard switch to seal the bag then pull the next bag into position. The bags remain connected and can be separated at the perforated line.
Features dwell time and heat controls, Universal funnel. 110 or 220 volt, 40 PSI 1/16” wide seal, Up to 11” wide bags x 16” long. Dims:20” W x 14” L x 21” H
$2,395
T-275 Same specs as above with added feature of automatically feeding and advancing the bag into position. 4 color touch screen with manual operation or
Automatic “paced” operation for faster cycle speeds. Maximum pass through height is 2.75”
$5,350
T-300 Fully Automatic-with automatic indexing, sealing and tear off or continuous strips. Cycle rate at up to 70 BPM, 3” Pass through height
$10,295
T-375 T-1000 PF-10 Partition Table MODEL NO. DESCRIPTION RETAIL
T-375 Same specs as the T-300 with the added feature of a built in thermal
transfer printer to print on your bags. Will print Next-Bag-Out just prior to
loading. Features the Zebra printer at 203 dpi 4” x 12” print area.
$23,695
T-1000 Top of the line bagger with cycle speeds of up to 100 BPM, Can be used
with automated equipment such as vibratory bowl feeders, counters, scales and infeed conveyors injection molding equipment etc, Can connect thermal transfer
printer to this unit.
$16,950
PF-10 Partition Table-Help to keep part separated prior to loading into machine $1,495
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 7
Bags on a roll vibrating bowls,weigh scales and parts counters etc.
UC-2400 UF-5000 MODEL NO. DESCRIPTION RETAIL
UC-2400 Vibratory bowl feeder and parts counter to be used in conjunction with
the T-1000 bagger. Great when used with fasteners, hardware
electronic components etc.
$22,950
UF-5000 Cleated compartment infeed conveyor used in conjunction with the
T-1000 bagger. This conveyor allows you to set the production speed for guaranteed production results.
$9,500
US-5000 US-7000 MODEL NO. DESCRIPTION RETAIL
US-5000 Semi-Automatic net-weigh / counting scale. Just slide any “sample” quantity in the load tray, key in your quantity, press the count button and you
are finished.
$9,850
US-7000 Automatic net weigh single or dual head scale. This is an automatic
feeding solution for fasteners, injection molded parts, foods or any bulk product. $37,000
Call for stock bags on a roll pricing
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 8
BAG / POUCH SEALING MACHINES (Pick, Fill and Seal Machines)
E-39 E-300 with 8 stations
E-Series machines are intermittent motion and designed to be used with Pre-Made bags or stand up pouches. Features Omron PLC with 7” color touch screen. It can support 4 side sealed bags, stand up pouches or zipper bags. Great for filling bags of cereal, snacks, rice, teas, nuts, candy, liquid or powder type products. Pre-made bags are loaded into the magazine where these bags are picked up, opened and filled with product from a filling system such as linear scales, multi-head weigh scales, volumetric cup fillers, volumetric piston fillers or auger fillers, after filling the bag is advanced to the sealing station, after sealing the pouch/bag is dropped onto the take away conveyor. #304 Stainless Steel Construction. Fill Volume for E-39 is 2500ML (84oz or 5lbs)
MODEL NO. DESCRIPTION RETAIL
E-39 Designed for Pre-Made Bags Production Rate: Up to 15 BPM
Bag Width: 120-320mm (4.72-12.6”) Bag Length: 150-450mm (6”-17.7”)
$24,500
E-39G Designed for Pre-Made Gusseted Bags Production Rate: Up to 12 BPM Bag Width: 80-160mm (3.15-6.3”)
Bag Length: 150-450mm (6”-17.7”)
$26,500
E-39Z Designed for Pre-Made Zipper Bags Production Rate: Up to 12 BPM Bag Width: 120-320mm (4.72-12.6”)
Bag Length: 150-450mm (6”-17.7”)
$26,500
E-300 Designed for Pre-Made Bags Production Rate: Up to 30 BPM
Fill Volume: 1000ml (34oz or 2 lbs)
Bag Width: 100-200mm (4”-8”) Bag Length: 100-300mm (4”-12”)
Bag deflator, Gas Flush and Zipper bag opener included
$59,950
Options Hot Stamp Ribbon Coder / Lot Numbers etc
Gas Flush Discharge Conveyor
$1,750 $1,495 $2,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 9
BAND SEALERS-CONTINUOUS
Model PP-880I Model PP-M810 Model PP-1010I Model PP-880II Model – Light Duty RETAIL
*PP-880I Horizontal-Table Top Band Sealer, right feed, Embossing- 1 line 18pt,0-472” inches per minute, 8mm seal width, conveyor width 7”, Max conveyor load 6.6 lbs, Machine Dims: 33” L x 17” W x 13” H, Weight 66 lbs, 110 volt
$1,195*
PP-M810 Horizontal, Same as above with Left to Right feed and Dry Ink Coding $1,495*
PP-1010I Horizontal-Right to left feed with Dry Ink Coding, Wide 15mm seal $2,295
*PP-880II Horizontal with “Vertical Kit” –Table Top Band Sealer, right to left feed,Embossing (some assembly required) Same as above with Min 5.9” to Max 10.6” bag height.
$1,295*
*PP-810II Vertical- Left to Right feed with Dry Ink Coding (7.8”-12” bag size only) $1,695* 15mm seal width- $350 | Stainless Steel Stand- $325
Model PP-1120C PP-1120LD Dry Ink Coding-Black ink on white bag
Model – Medium Duty RETAIL
*PP-1120C Stainless Steel Construction, Horizontal Continuous Band Sealer, RightFeed, Tilt Head 30 degrees, Dry Ink Coding up to 20 characters per line, sealing speed 0-394”/min, Conveyor 43” L x 8” W, Max conveyor load 16.5 lbs, Seal Width 8mm (.315) Machine dimensions 43” L x 24” W x 41” H, Weight 190 lbs, 110 Volt.
$3,995*
*PP-1120LD Vertical band sealer with Dry Ink coder, right to Left feed, StainlessSteel Conveyor 55” L x 10” W, Single bag weight 11 lbs, Max conveyor load 33 lbs, Seal width 8mm, Speed 0-394”/min, Bag size 3.9”min-28”max, Machine Dim 57” L x 27” W x 58” H
$4,500*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 10
BANDING MACHINES-PAPER and PLASTIC
TZ-888 TZ-888A WK02-30
Model RETAIL
TZ-888 – 10,20,30 or 40mm Tape Width Pkg Width: 40-240mm (1.5”-9.5”) Pkg Height: 5-140mm (1/4”-5.5”) Machine Dimensions: 425mm L (16.75”) x 320mm W (12.8”) x 405mm H (16”) Speed: 20-25 PPM Power: 110 volt / Weight 25kg (55 lbs) Uses 500 ft tape rolls
$4,800*
TZ-888A Same as above with arch and larger package capacity. Pkg Width: 40-270mm (1.5”-10.5”) Pkg Height: 5-170mm (1/4”-6.7”)
$4,995
WK02-30 Same as above with large arch size of 470mm x 320mm (18.5” W x 12.6” H) Uses 30mm wide paper or plastic material
$5,995
TZ-889 TZ-889A WK02-30B Model RETAIL
TZ-889 Same specifications as TZ-888 With larger tape roll capacity 2,000 ft rolls
$5,250*
TZ-889A Same specifications as TZ-888A with arch and larger package capacity (6.7” W x 10.5”H) and larger tape roll capacity 2,000 ft rolls
$5,500
WK02-30B Same as above with larger arch 470mm x 320mm (18.5” W x 12.6” H) Uses 30mm wide paper or plastic rolls 2,000 ft
$6,500
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 11
PAPER and PlASTIC TAPE ROLLS
Tape Rolls RETAIL
Paper Tape White or Brown 500 ft Rolls
10mm x .15mm thick x 500 ft (1 roll) (120 rolls per case) 20mm x .15mm thick x 500 ft (1 roll) (60 “ “ “ ) 30mm x .15mm thick x 500 ft (1 roll) (40 “ “ “ ) 40mm x .15mm thick x 500 ft (1 roll) (30 “ “ “ )
$ 3.50 $ 6.50* $ 9.50* $12.50
Paper Tape White or Brown 2,000 ft Rolls
10mm x .15mm thick x 2,000 ft (1 roll) (30 rolls per case) 20mm x .15mm thick x 2,000 ft (1 roll) (15 “ “ “ ) 30mm x .15mm thick x 2,000 ft (1 roll) (10 “ “ “ ) 40mm x .15mm thick x 2,000 ft (1 roll) (7 “ “ “ )
$12.95 $25.95* $38.90* $51.85
Plastic Tape 500 ft Rolls
10mm x .12mm thick x 500 ft (1 roll) 20mm x .12mm thick x 500 ft (1 roll) 30mm x .12mm thick x 500 ft (1 roll) 40mm x .12mm thick x 500 ft (1 roll)
$ 6.50 $12.95* $19.50* $25.95
Plastic Tape 2,000 ft Rolls
10mm x .12mm thick x 2,000 ft (1 roll) 20mm x .12mm thick x 2,000 ft (1 roll) 30mm x .12mm thick x 2,000 ft (1 roll) 40mm x .12mm thick x 2,000 ft (1 roll)
$25.95 $51.85 $77.76 $99.50
Printed Tape Rolls (White Paper)
20mm x .15mm x 500 ft (1 color print) 150 roll minimum 600 “ “
30mm x .15mm x 500 ft (1 color print) 100 roll minimum 400 “ “
20mm x .15mm x 500 ft (2 color print) 150 roll minimum 600 “ “
30mm x .15mm x 500 ft (2 color print) 100 roll minimum 400 “ “
20mm x .15mm x 500 ft (4 color print) 150 roll minimum 600 “ “
30mm x .15mm x 500 ft (4 color print) 100 roll minimum 400 “ “
Plate charge of $250.00 per color
$10.50/ea $ 8.95 $13.25 $10.85
$11.60 $ 9.50 $14.95 $11.50
$12.75 $ 9.95 $16.75 $12.50
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 12
*Asterisk indicates item in stock
Heat Sealable CO-EX OPP Films
(Call for pricing)
Description: A general purpose, heat sealable, co-extruded, bi-axially oriented polypropylene film with the following features:
Two side heat sealable Broad heat seal range One side corona treated FDA compliant Outstanding clarity and superior gloss Excellent Machinability Good moisture barrier
Applications: Well suited for both horizontal and VFFS (Vertical Form Fill and Seal) machine applications such as Doboy, Illapack etc. Can be used on:
Bakery items, cookies brownies, muffins Etc.
Snack foods, crackers Etc.
General box over-wrap DVD/CD Etc.
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 13
CARTON SEALERS MODEL NO. MODEL DESCRIPTION RETAIL
CT-50
Our most
popular model
Semi-Automatic Uniform Carton Sealer
with Side Drive Belts. Featuring the
“Piranha” Top and Bottom Tape Heads, 2” Tape head Std
Height: Min: 5” Max: 20”
Width: Min: 4” Max: 20”
$3,650*
CT-50-SS CT-50 with Stainless Steel
frame Height: Min: 5” Max: 20”
Width: Min: 4” Max: 20”
$7,650
CT-50-3
CT-50-3-SS
Same as CT-50 but with 3”
tape heads
Stainless Steel frame
Semi-Automatic uniform carton sealer with side
drive belts. Min box width 5.25” Max: 20”
Same as above
$4,250*
$7,950
CT-50-26 Same as above model with larger
box capacity Height: Max 26”
Width: Max 26”
$4,650*
CT-50R Semi-Automatic “Random” Carton Sealer with Side Drive Belts
Height: Min 4” Max 20”
Width: Min 4” Max 20”
$7,950*
CT-50DB
Dual Side Drive Belt- 2 Lower side drive
belts and 2 upper side drive belts.
(Great for tall narrow boxes that twist or shift
going through a regular tape machine)
Box Length: 6” Minimum; unlimited length Height: Min 6” Max 22”
Width: Min 4” Max 16”
$6,500
CT-55 Semi-Automatic uniform carton sealer with 2 top and 2 bottom drive belts. (4 Drive belt system) Box Length: 6” Minimum; unlimited length Height: Min 4.5” Max 20”
Width: Min 7” Max 19.5”
CT-55-3 (Same machine as above with 3” tape heads)
CT-55-LP (Low Profile) Same machine as above with offset tape heads will allow
machine to process boxes as low as 2.0” high (bottom belt gap 4.5”)
$3,850*
$4,350*
$5,995
CT-55R “Random” Automatic Carton Sealer, Length: 6”-Unlimited Width: 7”-20” Height: 2”-22.5” (Std 2” tape heads)
CT-55R-SS (Stainless Steel Frame) CT-55R-3 Painted Frame with 3” tape heads
$8,500*
$13,150 $ 8,900*
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 14
MODEL NO. MODEL DESCRIPTION RETAIL
CT-55-26 Height: 4.5”-26” Width: 7”-26”
$5,450*
CT-55-36 Height: Max 36”
Width: Max 36”
$6,495
CT-55-SS Stainless Steel Frame Construction $7,450
CT-55-2 BELT Dual bottom drive belt design, our lowest priced model available
Box Length: 6” Minimum; unlimited length Height: Min 4” Max 20”
Width: Min 7” Max 19.5”
CT-55-2 Belt machine with 3” tape heads
$2,995*
$3,495*
MODEL DESCRIPTION RETAIL
PP-554TS Uniform Semi-Automatic Carton Sealer with
Top and Side Drive Belts. 2” Tape heads Std.
Length: Min 5.9”- Unlimited
Height: Min 4.7”- Max: 20”
Width: Min 7.9”- Max: 20”
$6,385
PP-554TS-26 Height: Max 26”
Width: Max 26”
$7,185
PP-554TS-36 Height: Max 36”
Width: Max 36”
$8,350
PP-553SFTB Uniform Semi-Automatic Carton Sealer with
“T” Rail. Features top and bottom flap
folding devices. Makes packing and loading cases much easier. Operator simply closes
the rear minor flap before pushing into
machine. 2” tape heads Standard. Rated at 15 CPM
Length: 10”-20”
Width: 10”-20”
Height: 6”-20”
$7,995
PP-553SF Uniform dual side drive belt case sealer with
Top Flap Folder.
Length: 10”-20”
Width: 10”-20”
Height: 3.5”-20”
$4,995
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 15
MODEL NO. MODEL DESCRIPTION RETAIL
PP-556AU Semi-Automatic “Random” Carton Sealer with Top and Side Drive Belts. Designed for
production runs where different size boxes will be
used. Std 2” Tape Head (3 “ Optional) Safety Guarding with magnetic locks
Length: 11.8” Min. Unlimited length
Height: Min 5.9”- Max 19.7” Width: Min 7.9”- Max 19.7”
PP-556AU-3 Same machine as above with 3” tape heads
$9,500*
$9,950
PP-556AU-SS Stainless Steel Version Inquire PP-556AU-26 Height: Max 26”
Width: Max 26” $10,850
PP-556AU-36 Height: Max 36”
Width: Max 36” $12,850
PP-555AU Semi-Automatic “Random” carton Sealer with Side drive belts only-Similar machine
to the PP-556AU but only 2 side drive belts and at a lower cost. Std 2” tape heads
PP-555AU with 3” tape heads
Safety Guarding with magnetic locks
Length: 11.8” Min. Unlimited length Height: Min 5.9”- Max 19.7”
Width: Min 7.9”- Max 19.7”
$8,500
$8,950
CT-50 BHO
CT-50 BHO (Bottom Tape head Only!)
CT-50 BHO-3 (3” tape heads)
CT-50 BHO-20” Random Automatic
CT-50 BHO-30” Random Automatic
$3,250*
$3,750
$5,995
$6,995
MODEL DESCRIPTION RETAIL
PP-558F
PP-705
Automatic Uniform Flap Closing Carton Sealer with easy manual carton size adjustment.
Top and side drive belts. Std 2” tape heads (3”
optional) Safety Guarding with magnetic locks
length: Min 7.9”- Max 21.6
Height: Min 4.7”- Max 19.7”
Width: Min 7.9”- Max 19.7”
PP-558F-3 (Same machine as above with 3” tape heads
$10,195*
$10,650
PP-558F-SS Stainless Steel $15,850
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 16
MODEL NO. MODEL DESCRIPTION RETAIL
PP-559AF Automatic Random Flap Closing Carton Sealer
With automatic carton size adjustment cycle. Photo eye
senses box, and machine automatically adjusts to various box sizes with patented box positioning and
hold down device. Std 2” tape heads (3” optional)
Safety Guarding with magnetic locks
length: Min 11.8”-Max 19.7
Height: Min 6.3”- Max 19.7”
Width: Min 7.9”- Max 19.7”
$29,650
PP-569SAF High Speed Fully Automatic Random carton
sealer with “Servo Drive” flap closer system and photo eyes for automatic box positioning. Light
curtain automatically adjusts upper tape head position for increased speeds. Machine features
2 side drive belts to pull the boxes through. Belt
speed of 100 ft/min or up to 20 cartons per minute
220 volt, 3 phase power
Std 2” tape heads (3” optional)
Safety Guarding with magnetic locks
length: Min 10”-Max 19.7
Height: Min 6.3”- Max 19.7”
Width: Min 7.9”- Max 15.7”
$47,950
PP-566EG Uniform Semi-Automatic 4 Edge Carton Sealer
with easy manual carton size adjustment. Top and
bottom drive belts, 3” tape heads. 300 Cartons per hour.
Box Length: Min 12”-24” Max
Box Height: Min 6”- 20” Max
Box Width: Min 10”-20” Max
$29,000
PP-566AEG
**Asterisk indicates machine instock Asterisk indicates machine
in stock
Fully Automatic “RANDOM” 4 Edge Carton
Sealing Machine. Production speeds of 250 cartons
per hour.
Top and bottom drive belts, 3” tape heads
Box Length: 12” Min-27.5” Max
Box Height: 6” Min-20” Max
Box Width: 10” Min-20” Max
$38,000
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 17
MODEL NO. MODEL DESCRIPTION RETAIL
PP-568ERT-ML
Case Erector and Bottom Sealer. Compact design with easy adjustments for various carton sizes, HMI Touch panel Control.60 pcs magazine storageProduction speed: 9-12 ctn/min
3 Models to choose from:
Small 5.9”-13.8” L x 4.3-11.8” W x 4.3-11.8”H
Medium:9.8-20” L x 7.8-15” W x 4.8-20” HLarge: 13.7-23.6”L x 11.8-17.7” W x 9.8-20” H
$28,500$29,500$30,500
PP-563BE
Semi-Automatic Pack Station Operator loads box into machine then pusher green button to activate bottom flap closer, when box is fully loaded operator simply closes the minor and major top flaps and pushes box into carton sealer. Adjustable legs from 22.5”-35”
Box Size: 250-500mm (9.8-19.6”) L x 200-400mm(7.8-15.7”) W x 100-500mm (4-19.6”) HAir Required
$2,795*
PP-563P
Pak-51
Semi-Automatic Bottom Flap Folder-Pack Station with Automatic Pusher Operator simply loads box into machine, pushes the foot switch and the bottom flaps are closed and when the box is filled the operator closes the minor and major flaps and pushes the green start button and the box is automatically pushed into the carton sealer.Box Size: 250-500mm (4.8-20”)L x 200-400mm (7.8-15.7”)W x 100-500mm (4-20”) HAir Required
Same system with larger box capacity: 5.9”-27.5” L 4.3-20.4” W and 4.7-20.4” High
$5,750*
$6,250
PP-570 Uniform Top and Bottom drive belt carton sealer with Side Seal Tape Heads. Std 2” tape head, 3” optional
Length: 6”-Infinite Width: 7.5”-23.5” Height: 5”-15.75”
$6,500
Optional Items: Infeed or Discharge Conveyor roller sections $250*Locking Casters (set of 4) $125*Leg Extension kit to raise conveyor height an additional 8” $150*Spare Tape Head 2” $795*Spare Tape Head 3” $875*6” Tape heads available on selected model $ Call
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 18
CD/DVD Overwrap Machines
JT-50 Shown with TS-2002 TS-3000 Easywrapper BC- 300/Collection table
MODEL Package Type Description RETAIL
JT-50 CD and DVD Regular and Slim Line
Overwrap of CD and DVD cases, Speeds of up to 42 ppm
$21,500
JT-50 Box Wrapper
Box Wrapper Great for cosmetic, pharmaceuticals, vitamin or candy boxes. Speeds of 25 to 35 ppm
$25,000
JT-50 Box Wrapper Infeed
1.5 meter belted infeed conveyor $ 5,000
Easy Overwrapper
Multiple Boxes sizes Semi-Automatic 2 step overwrap machine, easy change over to different box sizes, Max box size 8 ¼” L x 5.9*” W x 3 1/8” H Speeds of 5 ppm
$18,500
Easy Overwrapper with double work station
Same machine as above with 2 work stations to increase speed to 10 ppm
$24,950
TS-2002 CD and DVD Regular and Slim Line
Overwrap of CD and DVD cases, Speeds of 50 ppm, Easy changeover Max pkg size: 220mm x 145mmw x 30mm H
8.6” L x 5.7” W x 1.18” H
$25,500
TS-3000-Box Wrapper (Includes infeed conveyor)
Fully automatic, Servo Drive motors, PLC controlled. Great for cosmetic, pharmaceuticals, vitamin or candy boxes.
Speeds of 35 to 40 ppm
Box width: 2 ¾” (70mm) to 8.66 (220mm) Box length: 1 3/8” (35mm) to 4 ½ (115m) Box height: ½” to 3” (75mm)
$38,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 19
MODEL Package Type Description RETAIL
MD-350 Multi Pack machine 3, 5
and 10 pack of CD cases
25ppm Servo drive with PLC
programming can also run multiple cosmetic or pharmaceutical boxes
$42,000
Inf-120 120 PCS Count for CD
100 PCS Count for DVD
Infeed belt with 4 rows of hoppers Air required
$7,995
HZ-Infeed Horizontal Belted infeed accumulation
conveyer $4,700
BC-300 Discharge collection table (100 piece count) $4,995
Model 800 Disc
Detector
Detects if CD is in package-will eject if not $1,800
Optional Accessories
Additional Tooling $ 795
Print film registration $3,180
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 20
CHECKWEIGHERS Mettler Toledo-Hi Speed /Checkweighers and Metal Detectors
*These are “High Speed-High Quality” units!
Beltweigh-XC Beltweight-XC Combi
Model Description Max Capacity Accuracy
+/-
Check
Speed
RETAIL
Beltweigh
XC
2 Belt check weigher, Stainless steel frame
Construction, Belt width 200mm (7.8”) 6,000g 1-2g 280ppm $Call
Beltweigh
XC
3 Belt check weigher, Stainless steel frame
Construction, Belt width 200mm (7.8”) 6,000g 1-2g 280ppm $Call
Beltweigh
XC3
3 Belt check weigher, Stainless steel frame
Construction, Belt width 300mm (118”) 3,500g 1-2g 100ppm $Call
Beltweigh XC-Combi
2 Belt combination metal detector and checkweighers. Belt width 200mm (7.8)
Aperture height of 150mm (5.9”)
6,000g 1-2g 280ppm $Call
Prices will vary depending on options, number of belts, software packages. Please consult factory for actual machine quote.
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 21
Check Weighers – Entry Level
UC-11 with mechanical flipper type rejector
Model Description Weight Range Accuracy
+/-
Check
Speed
RETAIL
UC-11 Checkweigher #304 Stainless steel frame construction, Wipe down, 7” Touch screen , PLC, 50 program memory Max product width 8.6” (220mm) Max product length 11.8” (300mm)
10-2000g (.035oz -70oz-
4lbs)
0.5g-1.5g 65ppm $13,500
UC-12S High Speed Checkweigher (5-200g) (.17oz-7oz)
+/- 0.5g@100g
120ppm $16,500
UC-15 Checkweigher Max product width 15.7”(400mm) Max product length 17.7: (450mm)
50-6,000g (1.7oz-211oz-
13lbs)
+/-3g 40ppm $13,995
UC-25 Heavy Duty Checkweigher Product Width: 400mm (15.7”) Product Length: 450mm (17.7”)
1-30kg (66lbs)
250g 18.8 oz
3 ppm $16,995
Model Description RETAIL
Rejecter Mechanical flipper type rejecter included Included
Rejecter for UC-25 Pneumatic pusher-Variable Speed $4,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 22
CLAM SHELL SEALERS
The Clam Shell Sealer
The Clam Shell Sealer is equipped with two heated 3/8” wide and 10mm long serrated jaws. It has two temperature settings, Low 250F/120C and High 350F/175C. Ideal for sealing poly packing cases such as clam shell and other similar types of containers. Handles remain cool during operation. The sealer can be used in the voltage range of 100-240v. Effective welding area is 4mm x 10mm Product Dimensions are 8.2” L x 2.5” W x 1” H weight 10oz. Can spot seal: OPS,PSP, PVC, and EPS
Model RETAIL
KF-772DH $99
OnPak Clam Shell Ultrasonic Sealer
The Ultrasonic Hand Held Sealer offers the fastest hand held method for sealing clam shells. Dual heat multi-purpose hand held ultrasonic heat sealer. Ideal for sealing thin clam shells or for tacking. No waiting time to preheat. Spot seals OPS, PSP, PVC, HIPS, PPF, PP, and A-PET materials.
Easy to operate. Turn the unit on. Place the package to be spot welded between the points on the handset and depress. Move to the next place to be spot-welded on the package and repeat. The clam shell is spot-welded by ultrasonic waves. Can spot seal: PSP, OPS, HIPS, PPF, PP, A-Pet and PVC
Model RETAIL
OnPak $665*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 23
CONVEYORS-POWER BELTED
PP-36B PP-72B PP-144B-SS MODEL NO. DESCRIPTION RETAIL
PP-36B
PP-36B-SS
3 ft Belted infeed conveyor x 18” wide belt, variable speed with adjustable side
guides. Stainless Steel Frame Construction, IP-55 Low pressure wash down
$2,850*
$4,095
PP-72B
PP-72B-SS
6 ft Belted infeed conveyor x 18” wide belt, variable speed drive with
adjustable side guide rails.
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$3,995*
$5,795
PP-108B
PP-108B-SS
9 ft Belted infeed conveyor x 18” wide belt, variable speed drive with
adjustable side guides.
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$5,600
$8,550
PP-144B
PP-144B-SS
12 ft Belted infeed conveyor x 18” wide belt, variable speed drive with
adjustable side guides. 1 HP motor
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$7,200
$11,400
PP-180B
PP-180B-SS
15 ft Belted infeed conveyor x 18” wide belt, variable speed drive with
adjustable side guides. 2 HP motor
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$8,695
$12,950
PP-240B
PP-240B-SS
20 ft Belted infeed conveyor x 18” wide belt, variable speed drive with
adjustable side guides. 2 HP motor
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$10,995
$15,500
*Asterisk indicates item in stock
Standard conveyors come with white FDA food approved belting (White or Blue)
Plastic Intralox belting can be substituted as no additional cost.
Other belt lengths available up to 30 ft long-Please inquire /Adjustable height legs from 32”-42” Standard
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 24
CONVEYORS-Narrow width Plastic or SS belting
PP-108SS Shown - Stainless Steel frame construction, available with either Plastic Slat Top or Stainless Steel Conveyor Belting, Standard width is 4”, we also offer these conveyors in 6” width.
MODEL NO. DESCRIPTION RETAIL
PP-72SS 6 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable
speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down
$3,595
$4,995
PP-108SS 9 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable speed, w/adjustable side guide rails.
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$5,350
$7,200
PP-144SS 12 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable speed, w/adjustable side guide rails.
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$7,150*
$9,600
PP-180SS 15 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable
speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down
$8,950
$11,950
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 25
CONVEYORS-Flighted
PP-36F Flighted PP-72F Flighted PP-72F with Friction Feeders
MODEL NO. DESCRIPTION RETAIL
PP-36F
PP-36F-SS
3 ft Flighted/lugged infeed conveyor x 18” wide belt, variable speed,
w/adjustable side guide rails. Std flight lug spacing 18” Stainless Steel Frame Construction, IP-55 Low pressure wash down
$3,500*
$4,995
PP-72F
PP-72F-SS
6 ft Flighted/lugged infeed conveyor x 18” wide, variable speed drive, adjustable side guides. Std flight lug spacing is 18”
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$5,995*
$7,800
PP-108F
PP-108F-SS
9 ft Flighted/lugged infeed conveyor x 18” wide belt, variable speed, w/adjustable side guides. Std flight lug spacing 18”
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$7,995
$10,500
PP-144F
PP-144F-SS
12 ft Flighted/lugged infeed conveyor x 18” wide belt, variable speed,
w/adjustable side guides. Std flight lug spacing 18” Stainless Steel Frame Construction, IP-55 Low pressure wash down
$10,500
$12,500
CONVEYORS-Specialized
PP-72FP (Flight Paddle Conveyor) PP-72FB (Flight Bar Conveyor) MODEL NO. DESCRIPTION RETAIL
PP-72FP
PP-72FP-SS
6 ft Flighted Paddle conveyor/lugged infeed conveyor x 18” wide belt, variable speed, w/adjustable side guide rails. Std flight lug spacing 18”
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$6,500
$8,500
PP-72FB
PP-72FB-SS
6 ft Flight Bar Conveyor is great for multi pack applications where
transporting 3 cans or 6 package together in a straight line and you need to feed into an automated packaging machine. 16” wide max pkg
width, variable speed drive, adjustable side guides. Std flight bar spacing is 13”
Stainless Steel Frame Construction, IP-55 Low pressure wash down
$6,995*
$8,900
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 26
Conveyors-Flexible Skatewheel and Roller
PP18-16 SW (Skatewheel) PP18-16 GR Model Description RETAIL
SW – Flexible Gravity Skatewheel Conveyor
PP 14-12 SW 14” Wide Flexible Gravity Skatewheel Conveyor adjustable from 3 ft compacted to 12 ft extended, adjustable height from 28” to 44”, 175 lb capacity per linear ft, Heavy duty Red Nylon wheels, 5” Dia Locking casters.
$945*
PP14-16 SW 14” wide, 4 ft compacted to 16 ft expanded $1,165* PP14-20 SW 14” wide, 5 ft compacted to 20 ft expanded $1,360 PP14-24 SW 14” wide, 6 ft compacted to 24 ft expanded $1,595 PP18-12 SW 18” wide, 3 ft compacted to 12 ft expanded $1,050* PP18-16 SW 18” wide, 4 ft compacted to 16 ft expanded $1,295* PP18-20 SW 18” wide, 5 ft compacted to 20 ft expanded $1,520 PP18-24 SW 18” wide, 6 ft compacted to 24 ft expanded $1,750 PP24-12 SW 24” wide, 3 ft compacted to 12 ft expanded $1,095 PP24-16 SW 24” wide, 4 ft compacted to 16 ft expanded $1,385 PP24-20 SW 24” wide, 5 ft compacted to 20 ft expanded $1,650 PP24-24 SW 24” wide, 6 ft compacted to 24 ft expanded $1,895
GR –Flexible Gravity Roller Conveyor
PP 18-12 GR Gravity roller conveyor. 18” wide expandable from 3 ft to 12 ft. Adjustable height from 28 ” to 44”, 150 lb capacity, 1 3/8” Dia zinc plated rollers, fully extended axle center 5” Locking casters.
$1,465
PP18-15 GR 18” wide, 4 ft compacted to 16 ft expanded $1,850
PP18-20 GR 18” wide, 5 ft compacted to 20 ft expanded $2,185
PP24-12 GR 24” wide, 3 ft compacted to 12 ft expamded $1,575
PP24-15 GR 24” wide, 4 ft compacted to 16 ft expanded $2,020
PP24-20 GR 24” wide, 5 ft compacted to 20 ft expanded $2,400
PR- Powered Roller Conveyors-Variable Speed 0-120 FPM
PP24-15 PR Powered Roller Conveyor- 24” wide, 5 ft compacted to 16 ft expanded $7,350
PP24-20 PR Powered Roller Conveyor- 24” wide, 6 ft compacted to 20 ft expanded $8,550
*Asterisk indicates item in stock
All conveyors F.O.B. Swaunee, GA (Package end stop included with all conveyors) Add 5% for Black Polymer skatewheels Add 9% for Steel skatewheels 7” Min Pkg length requires 3” axle centers/ 9” Pkg length requires 4” axle centers, 11.5” Pkg length requires 5.25” axle centers
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 27
CONVEYORS-GRAVITY CURVES
PP180-36 shown with PP-1622MK and PP1808-28 system PP180-24 shown with PP-1519ECMC system
90 and 180 Degree Gravity Curved Conveyors
MODEL NO. DESCRIPTION RETAIL
PP180-24 180 degree curved conveyor 15” wide with 24” straight section,
¾” dia aluminum rollers on 1 ¼” centers with Stainless Steel concentric curve to keep package from falling off edge, painted
legs. Adjustable height legs from 28” to 42”
This conveyor normally sold with PP1519ECMC machines
$1,150*
PP180-36 180 degree curved conveyor with 36” straight section
This conveyor is normally sold with the PP1622MK L’
Sealer and PP1808-28 Shrink tunnel set
$1,395*
PP180-72 180 degree curved conveyor with 72” straight section $1,795*
PP-180C 180 Degree curve only-Right to left (Standard) $ 895*
PP-180C-L 180 Degree curve only-Left to right $ 995
PP-90Curve 90 Degree curve only-Right to left (Standard) $ 850*
PP-90Curve-L 90 Degree curve-Left to right $ 895
PP90-24 90 Degree curve with 24” straight $ 985*
PP90-36 90 Degree curve with 36” straight $1,195*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 28
CONVEYORS-GRAVITY ROLLER-STRAIGHT-LIGHT DUTY
MODEL NO. DESCRIPTION RETAIL
PP-24GR 24” Long x 15” wide, Straight conveyor section with new “H” style leg supports, Adjustable legs from 22”-35” (End stop
included)
$350*
PP-36GR 36” Long x 15” wide straight section with adjustable legs $395*
PP-72GR 72” Long x 15” wide straight section with adjustable legs $695* ¾” diameter aluminum rollers on 1 ¼” centers, will transfer very light packages
CONVEYORS-GRAVITY ROLLER-STRAIGHT-HEAVY DUTY
MODEL NO. DESCRIPTION RETAIL
PP-60HD-GR 15” wide 5ft Straight section with “H” style adjustable legs, $550*
PP-120HD-GR 15” wide 10ft Straight section with adjustable legs $850*
PP-60HD-GR 18” wide 5ft Straight section with adjustable legs $595*
PP-120HD-GR 18” wide 10ft Straight section with adjustable legs $950*
PP-60HD-GR 24” wide 5ft Straight section with adjustable legs $650
PP-120HD-GR 24” wide 10ft Straight section with adjustable legs $1,050
*Asterisk indicates item in stock1 3/8” dia galvanized steel rollers on 1.5” centers on all conveyors, , Spring loaded axle allows
roller to be easily removed or inserted. “H” style Leg supports are adjustable from 26” to 38”
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 29
CUTTING MACHINES Hot and Cold, Straight and Angled for Ribbon, Velcro, Labels Etc.
TBC-50 TBC-50R TBC-52RT TBC-53R Model – Velcro Cutting RETAIL
TBC-50 Velcro Cold Cut $3,495 TBC-50R Velcro Round Cut –Cold $3,595 TBC-50RT Velcro Round and Straight Cut-Cold $3,895 TBC-53R Velcro Extra Large-Cold $4,295
TBC-55HX TBC-50HX TBC-50H Model – Ribbon Cutting RETAIL
TBC-55HX Angle Cut-Hot $7,795 TBC-50H Hot Cut $4,795 TBC-50HW Hot Wire Cut-No Fray $5,995
TBC-50SH TBC-50S Model – Label Cutting RETAIL
TBC-50SH Woven Label Cutter with Sensor-Hot
$5,895 TBC-50S Printed label Cutter with Sensor-Cold
$4,995 TBC-554L Wide format material cutter up to 15.75” $9,450
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 30
DROP SEALERS / BAG OPENERS
PP-615/402 Drop Sealer and Bag Opener PP-402 Bag Opener
Model RETAIL
PP-615/402 Combination Drop Sealer and Bag Opener all on one frame! 15” wide seal bar, pneumatically operated drop sealer with photo eye activation and bag opener combination machine. 110 volt, 2 CFM at 80 PSI air required, Max jaw opening 6”, Max bag length 20” PP-615/402-SS Stainless Steel frame construction (Wipe Down)
$6,450*
$10,500
PP-620/405 Same as above with wider seal jaw and larger bag opener. 20” Wide Seal Bar, Max jaw opening 8”, Max bag length 30”
$7,995
PP-615 Drop Sealer Sold Separately $5,495
PP-620 Drop Sealer Sold Separately $6,795
PP-402 Bag Opener sold separately $1,150*
PP-405 Bag opener sold separately $1,450
Air Expeller-Compression Plate $995.00
Incline Conveyor-18” W x 4 ft long-Paddle style belt helps move product up conveyor.
$3,495*
PP-36LS 36” Diameter Lazy Susan turntable PP-48LS 48” Diameter Lazy Susan Turntable
$1,395* $1,895*
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 31
FILLING EQUIPMENT- AUGER FILLERS
AUGER FILLERS
AG95-S Standalone Auger Filler AG95-L With screw conveyor Model RETAIL
AG-95-S Standalone Auger Filler with 7” touch screen, Omron controller, servo control, flow boosting agitator. Fill range: 10-1000g, (1.7-35oz) 50 cycles per minute, accuracy +/- 0.3-1%
$15,950
AG135-S Same unit as above with larger capacity Fill range: 100-2000g (3.5-70oz)
$21,250
AG50-L Auger filler for powders (filler to integrate) Fill range: 1-50g ( 1-17.5oz)
$ 4,995
AG95-L Auger filler for powders, (filler to integrate) Fill range: 10-1000g (1.7-35oz)
$14,950
AG135-L Auger filler for powders (filler to integrate) Fill range: 100-2000g (3.5-70oz)
$18,595
AG-165L Auger filler for powders (filler to integrate) Fill range: 1-5000g $27,185
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 32
FILLING EQUIPMENT-PISTON FILLERS
LP-Series Liquid Piston Fillers
The LP Series is a volumetric piston filler that is “Wash Down” design and able to fill products such as liquid soaps, hair gel, jams, BBQ Sauce etc. Filling controlled by timer or
footswitch, stepless volume adjustment, Stainless Steel Construction-No electrical required!
Model RETAIL
LP-60 Stainless Steel construction, Hopper volume 10 litre (2.5 gal), air required, Filling speed 30-40 PPM Accuracy +/- 2%, fill range 3-60ml (.1-2oz)
$3,450
LP-120 Same as above with fill range of 10-120ml (.3-4oz) $3,650*
LP-250 Same as above with fill range of 20-250ml (.6-8oz) $3,995*
LP-500 Same as above with fill range of 50-500ml (1.5-16oz) 20 Liter hopper (5 Gallon)
$4,895
Hopper Agitator with frequency regulator $2,150 Hopper with heater package and temperature controller to heat product up to a more liquid consistency for easier filling and increased fill speeds
$1,800
Hopper level sensor $ 995 Lid press-Heavy stainless steel plate forces non flowing product down hopper
$ 225
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 33
FRICTION FEEDERS/ BATCH COUNTING/COLLATING SYSTEMS
V-1000 V-2000 V-710BC
Model RETAIL
V-1000 Min: 2.5” x 3” Max: 12” x 12” Continuous feeder for ink jet printing, tabbing and labeling.
$3,500
V-2000 Min: 2.5” x 3” Max: 20” W x 18”L Continuous feeder for ink jet printing, tabbing and labeling
$5,900
V-710BC One shot feed and batch counting at 100 cycles per minute. Min: 3.75” x 3.75” Max: 12” x 12”
$6,500
ST-1250EX Pneumatic ST-1250 Retractable
Model RETAIL
ST-1250EX Pneumatic Call for Pricing
ST-1250 Retractable Dropper Call for Pricing
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 34
Reciprocating Placer Rotary Placer
Tray Denester
Model RETAIL
Reciprocating Placer- Min: 1.5” x 1.5” Max: 10” x 10” 65 cycles per minute
Call for Pricing
Rotary Placer Min: 1.5” x 1.5” Max: 6” x 6” Up to 400 cycles per minute Call for Pricing
Tray Denester- Min: 1.5” x 1.5” Max: 20” W x 10”H Up to 45 cycles per minute
Call for Pricing
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 35
Horizontal FFS Flow Wrapping Machines Low cost – Entry Level. Great for wrapping cookies, muffins, candy bars, biscuits, brownies,
etc.
Model PM-C250 Shown
Model Description RETAIL
PM-C250 Great entry level horizontal FFS Flow Wrapping Machine with mechanical drive and touch screen menu with auto diagnostics with error display, product counter, 6.5 ft flighted infeed conveyor. One step adjustment of bag length.
Speeds from 40 to 100ppm
Seal jaw width: 4.3” (110mm) Bag length: 2.5” (65mm) to 11” (280mm) Bag width: 1.25” (30mm) to 4.2” (110mm) Max film width: 3.5”(90mm) to 9.8” (250mm) Max prod height: 1.5” (40mm)
$19,950*
PM-C250 IVC Inverted
Inverted film feed design where the film comes up from the bottom and the fin seal is on top. Great design for feeding small items or item that are difficult to transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film and then the film carries the product into the seal jaw.
$23,000
PM-C350
PM-C350H PM-C350HL
Same machine as C-250 described above, but will accommodate larger package sizes.
Seal jaw width: 7” (178mm) Bag length: 2.5” (65mm) to 7.25” (190mm) Bag width: 2” (50mm)to 6.25” (160mm) Max film width: 5” (130mm) to 13.75” (350mm) Max prod height: 1.5” (40mm) Max Pkg Height: 2.5” /Bag Length 4.25-8.5” Max Pkg Height: 2.5” / Bag Length 5.75-12.75”
$22,500*
$24,500* $25,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 36
PM-C350-IVC Inverted Inverted film feed design where the film come up from the bottom and the fin seal is on top. Great design for
feeding small items or item that are difficult to
transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film and
then the film carries the product into the seal jaw
$24,500
PM-C450 Same machine as C350 described above, but will
accommodate larger package sizes.
Seal jaw width: 9” (229mm)
Bag length: 5” (130mm) to 17.5” (450mm) Bag width: 2.2” (60mm) to 7.8” (200mm)
Max film width: 6” (150mm) to 17.7” (450mm)
Max prod height: 3” (80mm)
$27,500*
PM-C450-IVC Inverted Inverted film feed design where the film come up from
the bottom and the fin seal is on top. Great design for feeding small items or item that are difficult to
transport or transfer on a flighted infeed conveyor. The
flight pusher will push the product onto the film and then the film carries the product into the seal jaw
$29,500
PM-450R Box motion (reciprocating seal head) designed for
taller package sizes. Will accommodate packages up to 100mm (4” tall).
Seal Jaw width: 9” Bag length: 4.75 (120mm)-17.75 (450mm)
Bag Width: 1.6” (40mm) – 7.8” (200mm) Max Pkg Height: 4” (100mm)
Max Film Width: 17.7” (450mm)
Machine Speed: 20-60 PPM
$35,500
PM-C600H Same machine as C450 described above, but will
accommodate larger package sizes.
Seal jaw width: 11” (279mm)
Bag length: 5” (130mm) to 17.5” (450mm) Bag width: 2.5” (65mm) to 10.5” (275mm)
Max film width: 6” (150mm) to 23.5” (600mm)
Max prod height: 4” (100mm) Machine Speed: 20-75 PPM
$39,500
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 37
PM-C675R Box Motion / Reciprocating Seal Head that will accommodate taller package sizes.
Seal jaw width: 11” (279mm)
Bag length: 4.75” (120mm) to 17.5” (450mm)
Bag width: 2.5” (65mm) to 7.8” (200mm) Max film width: 26” (660mm)
Max prod height: 5” (130mm) Machine Speed: 20-70 PPM
$42,950
Optional Accessories RETAIL
Stainless steel frame construction $ 4,600
Photo electric eye for printed film Included
All color photo sensor $ 595
Adjustable film forming plow $ 895
Dual crimp jaws $ 695
Powered Discharge Wheel on Exit Conveyor-Helps to Separate Products $ 950
Gas flush-Control valves and pipes $ 895
Gusseted bag device $ 850
Plastic product carriers $ 650
Single head label applicator $ 9,950
Dual head label applicator $16,500
Hot Ink Roller Coder (Print area 18 characters x 11 lines) $ 2,150
Hot Ink Ribbon Coder-THR40A (typeset 2x4mm) (Includes ribbon alarm)
$ 3,950
U2 Pro Ink Jet Printer-Includes mounting hardware (1/2” print height and 600 dpi) $ 4,650
Video Jet 6320-32 Thermal Transfer printer, 8.4” Touch Screen, 32mm print head at 300 DPI, supports 9 types of bar codes, 0-750mm/sec print speed, 32mm x 200mm print area, Clarisuite software included Thermal transfer ribbon 33mm W x 500m L (25 roll min)
$ 8,550
$35/roll
Video Jet 6320-53 Thermal Transfer Printer, same as above with 53mm wide print head. Thermal transfer ribbon 55mm x 900M (25 roll min)
$10,500
$102/roll
Extended Infeed Conveyor-Std length 6.5ft (2 meters) Add 1 meter (3ft) for a total length of 9.5ft (3 meter) $ 1,295
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 38
Horizontal FFS Flow Wrapping Machines
High Quality Mechanical Drive Horizontal FFS Flow Wrapping Machine
* Model M-5247 Shown
Model Description RETAIL
M-5247 Horizontal FFS Flow wrap machines with mechanical drive. Mitsubishi PLC control, Omron temperature controls, powder coat finish, motorized bag length adjustment. Overload protection on end seal jaw with automatic disengage variable speed inverter, bag counter display, adjustable product guide rails, top hold down belt, discharge brush to stabilize product on discharge transfer 7ft flighted infeed conveyor.
Speed from 30 to 150ppm
Bag length: 2.75” (70mm) to 13.75” (350mm) Max film width: 18.5” (470mm) Max prod width: 7.5” (190mm) Max prod height: 1.18” (30mm) or 2.36” (60mm) or 3.54” (90mm)
$30,750
M-5261 Same machine as described above with larger capacity
Speeds from 20 to 150ppm
Bag length: 5.1” (130mm) to 17.7” (450mm) Max film width: 24” (610mm) Max prod width: 10.4” (265mm) Max prod height: 3.9” (100mm)
$35,450
BC-300
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 39
Horizontal FFS Wrapping Machines
High Speed “Servo Drive” Horizontal Flow Wrap machines *Model S-5647 Shown
Model Description RETAIL
S-5547 Horizontal single (1) axis servo motor drive flow wrapper with Siemens PLC controller, 5.7” color touch screen with 50 program memory, photo eye for printed film, adjustable film former, 7.5ft (2.3m) flighted infeed conveyor, European “CE” safety standard. Overload protection on end seal with automatic jaw disengage function. Speeds of 30 to 250ppm Bag length: 3.5” (89mm) to 15.7” (400mm) Max prod width: 7.5” (190mm)
Max film: 18.5” (470mm) Max prod height: 30mm (1.18”), 60mm (2.4”) or 90mm (3.5”)
$38,950*
S-5547-IV Same machine as above with inverted film feed (film feeds from bottom roll for better product transfer
$61,850
S-5561 Same as above with larger capacity, (1) axis servo drive
Speeds of 20-170ppm Bag length: 5.11” (130mm) to 17.71” (450mm)
Max film width: 24” (610)mm Max prod width: 10.4” (265mm)
Max prod height: 30mm (1.18”), 60mm (2.4”) or 90mm (3.5”)
$44,175
S-5647 Horizontal (3) axis servo motor drive flow wrapper with Siemens PLC control module, 10.4” color touch screen with 100 program memory, 3 axis servo motor for infeed, fin seal and end seal. Over-load protection for end seal with automatic disengage, photo eye for print registration.
Speeds of 30 to 250ppm
Bag length: 3.5” (90mm) to 17.71” (450mm)
Max film width: 24” (610mm) Max prod width: 10.4” (265mm)
Max prod height: 30mm (1.18”), 60mm (2.4”) or 90mm (3.5”)
$50,900
S-5647 (4) axis servo-same as above with 4 servo motors $54,675
S-5661 Same as above 4 axis servo drive with larger capacity.
Prod speeds of 20 to 170ppm Bag length: 5.11” (130mm) to 17.71” (450mm)
Max film width: 24” (610mm) Max prod width: 10.4” (265mm)
Max prod height: 30mm (1.18”), 60mm (2.4”) or 90mm (3.5”)
$56,500
S-5747-SB3 5 Axis servo drive with “Allen Bradley” PLC, 10.5” “AB” color touch screen with 100 program memory, Attachless Smart Belt Infeed, no product/no cycle, Dual film reel holders, speeds of 20-160 PPM
Call for pricing
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 40
Horizontal FFS Flow Wrapping Machines
Model S-5547-SH Shown
High speed flow wrappers for “shrink film” application. (Choose from static lap seal, Trim seal or fin seal)
MODEL DESCRIPTION RETAIL
S-5547-SH Single axis servo motor drive flow wrapper for shrink film. Uses vacuum belt drive, Siemens PLC controller with 50 program memory, 5.7” touch screen panel for easy set up and change over, overload protection with automatic disengage of end seal jaws.
Speeds from 30 to 120ppm
Bag length: 6” (150mm) to 15 ¾” (400mm) Max film width: 18.5” (470mm) Max prod width: 7.5” (190mm) Max prod height: 2 ¾” (70mm)
$56,500
S-5561-SH Same machine as described above with larger capacity
Production speed: 30 to 90ppm
Bag length: 6.69” (170mm) to 17.71” (450mm) Max film width: 24” (610mm) Max prod width: 10.43” (265mm) Max prod height: 2 ¾” (70mm)
$59,500
* Higher package heights available upon request*
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 41
Horizontal FFS Flow Wrapping Machines Options DESCRIPTION RETAIL
Stainless Steel frame construction –M Series $6,250
Stainless Steel frame construction- S Series $8,495
Plastic carrier blocks $ 795
Date coder-Pneumatic drive-Time delay-Carbon ribbon coder, 2 position X or Y Print position Needs to be changed when you change machine speed.
$2,800
Date coder-Stepper motor drive–Encoder positioning-Carbon ribbon coder, prints in machine direction only, Alarm when ribbon is finished.
$3,950
Date coder-Stepper motor drive-Encoder positioning-Hot ink Coder, 2 position print X or Y direction. $3,950 U2 Pro Ink Jet Printer (1/2” print height and 600 DPI) (*For use with clear film only) $4,650 Videojet Dataflex 6320-32 Thermal Transfer Printer (32mm print head) $8,500 Videojet Dataflex 6320-53 Thermal Transfer Printer (53mm print head) $10,500 Center seal pre-heater (for better sealing at high speed) $2,300
End seal euro slot hole punch $1,295
Gas flush device (control valve & pipes) $1,675
Auto-Labeling unit-Will apply pressure sensitive label to top of package $10,850
Additional film roll holder $1,500
End seal gusset device $2,495
Adjustable film forming box $2,495
Fixed forming Box $ 395
Hopper feed-Single tower, Manual loading of product into hopper, flight lugs picks product from hopper and places onto infeed conveyor
$3,000
Dual/Twin end sealing jaws to reach speeds of 250 PPM $2,000
Triple Sealing Jaws $3,950
Top chain transfer conveyor on end seal area-Helps to transfer small 60mm (2.5”) pkgs $1,895
Right to left (mirror image) machine configuration $1,800
Top chain transfer conveyor on 2 meter infeed with multi belt transfer between in-feed and bag former (available on servo models only)
$16,500
No product / no cycle – available on 3 & 4 axis servo machines only $6,500
Double pitch in-feed conveyor with removable pushers for wrapping packages that have a large length range ( 3 axis servo machine only) Mechanical and 1 axis servo machines require gear change
$1,995
$1,395
No product – Automatic stop/Automatic re-start( available on “M” series machines only) $1,200
480 volt power $ 695 Add Servo motor drive on “S” series machines (ea) $4,600
Automatic film splicer with dual roll holder models $10,950
Cross Belt Auto Feeding Conveyor-Product transfers at 90 degrees $23,950
Allen-Bradley PLC Micrologix 1400 controller with AB 5.7” HMI $4,000
Extended Infeed Conveyors- Std length 2.3 meters/7 FT Add 1 meter – 3 ft/Total length of 10 ft Add 2 meters – 6 ft/Total length of 13 ft Add 3 meters – 9 ft/Total length of 16 ft
$2,550 $5,100 $7,650
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 42
Horizontal FFS Flow Wrapping Machines
H-303 Series Horizontal FFS (Form, Fill and Seal)
The model H-303 is a horizontal form fill and seal machine designed for cosmetics, chemical, snacks, candy, granular, liquid or powder products in a 3-side or 4-side seal bag. It can make a bag up to 140mm W (5.5”) x 180mm L (7”)
Model Description RETAIL
H-303 Horizontal FFS machine for cosmetics, granular, liquid or powder products Servo motor film drive system. 1 fill station 7” Omron touch screen HMI. Mitsubishi PLC, photo eye, auto diagnostics, Quick change 3 side or 4 sided seal, stand up pouch with zipper, can use auger filler to fill bag. Production speeds of 40-65 BPM Fill range: 160ML (up to 3.38 oz) Bag length: 2.95” (75mm)-7” (180mm) Bag width: 2.4” (60mm)- 5.5” (140mm)
$49,500
H-503 Same machine as above with larger bag size and fill volume, 2 fill stations. Production speed 40-65 BPM Fill Range: 400ml (13.5oz) Bag Length: 2.85” (75mm) – 8.85” (225mm) Bag Width: 2.56” (65mm) – 7” (180mm)
$63,500
H-505 Higher speed with smaller fill volume- 2 filling stations with the use of dual head fillers with production speeds of 80-130 BPM Fill volume: 60ml (2 oz)
$89,950
H-511 Stand up pouch model with Zipper and dual filling stations. 50 BPM
$134,000
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 43
Optional Accessories
Description RETAIL
Stainless steel frame construction $6,000
Hot stamp printer (3 lines of type 1.3” w) $1,600
Additional film forming collar $1,995
Exit conveyor with incline and food grade mesh belting $2,550
Gas flush device $1,650
Side gusset option on bag $2,085
Euro slot hole punch $2,195
“V” shaped tear notch for easy bag opening $1,695
Dimple plate structure on metal $1,575
AUGER-Options RETAIL
Vibration device during filling to avoid product accumulation $1,450 Powder dust extractor $3,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 44
“I” BAR SEALERS & TABLE TOP “L” SEALERS
Deluxe ”I” Bar Impulse Sealer with seal timer Unit includes heat gun and starter roll of film
Model RETAIL
PP-13DS Deluxe 13” seal bar with impulse light that goes out when finished $360 PP-18DS Deluxe 18” seal bar with impulse light that goes out when finished $380* PP-24DS Deluxe 24” seal bar with impulse light that goes out when finished $390* PP-32DS Deluxe 32” seal bar with impulse light that goes out when finished $425 PP-40DS Deluxe 40” seal bar with impulse light that goes out when finished $465
” Impulse Sealer includes heat gun, seal pad and film
PP-450HL Includes film roll stand with perf wheels
Model RETAIL
PP-300HL 12” x 18” L’ Sealer w/film stand $ 795* PP-450HL 18” x 18” L’ Sealer w/film stand $ 895* PP-600HL 24” x 32” L’ Sealer w/film stand $1,250* Heat Gun sold separately $ 65*
* Heat gun or table top shrink tunnel sold separately
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 45
IMPULSE SEALERS
PP-200H PP-200HC with cutter
Hand Type Poly Impulse Sealers RETAIL
Model Size
PP-200H 8” $70*
*PP-200HC 8” $135*
Spare parts kit-200 $16*
PP-300H 12” $105*
*PP-300HC 12” $165*
Spare parts kit-300 $17*
PP-400H 16” $135*
PP-400HC 16” $195*
Spare parts kit-400 $20*
PP-500H 20” $175*
PP-500HC 20” $225*
Spare parts kit-500 $29*
* HC Model includes cutting knife.*Also available with 5mm wide seal at additional cost*Spare parts kit includes 2 sealing elements, 2 Teflon Covers, 2 Teflon Adhesives
E1500S AVP-20 Model RETAIL
E1000S 15” Pneumatic Impulse Sealer, ¼” seal, Clean room compatible, LCD display, pressure gauge, No Pinch safety jaw, Electronic foot switch, 110v (Air required)
E 1500 20” Seal length E 2000 25” Seal length E 2500 30” Seal length E 3000 35” Seal length
$1,345
$1,385* $1,495* $1,558 $1,810
AVP-20 Foot pedal operated pneumatic impulse sealer, 20” seal length. (Air required)
$1,328
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 46
IMPULSE AND CONSTANT HEAT SEALERS
PP-450F PP-450FC PP-400THS Foot Pedal poly Sealer Foot Sealer w/Cutting Knife Constant Heat
Model RETAIL
PP-300F 12” wide seal jaw, 1/8” (2mm) $295*
PP-300THS Constant Heat $425 Spare parts kit-300 $ 25* PP-450F 18” wide seal jaw 1/8” (2mm) $342*
PP-450FC with cutting knife $375*
PP-400THS 16” Constant Heat $475* Spare parts kit-450 $ 28* PP-600F 24” wide seal Jaw $395*
PP-600FC with cutting knife $425 Spare parts kit-600 $ 33* PP-750F 30” wide seal jaw $550 Spare parts kit-750 $ 38 PP-900F 35” wide seal jaw $750 *Also available with 5mm wide seal at additional cost
Spare Parts Kit Includes: 2 elements, 1 ft long roll of Teflon and 2 Teflon adhesives
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 47
INDUCTION SEALERS
Model AF-500W Model CS-501
Model DESCRIPTION RETAIL
AF-500W Semi-Automatic Induction Cap Sealer suitable for non-metal container such as glass, plastic bottles ABS, PE, PET, PP, PS, PVC. Cap size 15-120mm (500W power) 220 V, footswitch operated.
$2,995
CS-501 Semi-Automatic Capping and Foil Sealing Machines. Will screw on cap and foil seal, For non-metal containers such as glass, or plastic bottles, ABS, PE, PET, PP, PS, PVC. Cap range from 22-40mm (1000W) 220V
$5,335
Fully Automatic AF-2000W AFC-2000W
Model DESCRIPTION RETAIL
AF-2000W Fully Automatic Induction sealer with stand only- (for customers who already have conveyor) water cooling system, 2000W power 220V 12A Cap Dia 10-55mm,
$8,350
AF-3000W Fully Automatic Induction sealer with stand only- (for customers who already have conveyor) water cooling system, 3000W power 220V 15A Cap Dia 20-120mm,
$9,650
AFC-2000W Fully Automatic Induction sealer with Conveyor. Water cooling system, 2000W power 220V 12A Cap Dia 10-55mm, Belt Speed 20-60m/min, Metal belt conveyor
$11,600
AFC-3000W Same unit as above with 3000W power,
Cap size 20-120mm, 220 v 15A $12,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 48
Ink Jet Systems
U2 Printer with HP Technology, uses 42 cc Ink Cartridges, can print on boxes or structured films. Will print 4 lines at 1/8” each or 2 lines at ¼” each or 1 line at ½”
Model DESCRIPTION RETAIL
U2 Ink Jet Printer $1,695*
NP4 Ink Cartridge $129/ea*
U2 Mobile Hand Held Ink Jet Printer-The world’s most compact mobile printer, lightweight only 2.2 lbs, 7 Hour battery life, remote keypad with 2.8” color display.
Model DESCRIPTION RETAIL
U2 Mobile Hand held ink jet printer $1,995*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 49
L’SEALERS – FULLY AUTOMATIC “ECONOMY” MODEL SOLD WITH TUNNEL
PP-5600 “Economy” System Model Seal Size
L x W x H Description RETAIL
Economy PP-5600
Combo (L’ Sealer and
Tunnel)
25”x 19”x 4” Fixed belt speed 60 FPM 20 PPM
“Economy” Combination Fully Automatic L’ Sealer and Tunnel sold as a set, Delta PLC, Delta 5” Color Touch Screen with 12 program memory, Speeds to 20 PPM, Fixed belt speed 0-60 FPM, Manual motorized adjustments of inverting head and infeed conveyor position, Motorized scrap windup with alarm, pinwheel hole punch, Hot knife seal bar, Casters Includes separate shrink tunnel: Model PP1808-28 28” L x 18” W x 8” H
$23,995
Stainless Steel
Frame Construction
Made for USDA Approval-Wipe Down Only
Call for Pricing
PP-5600E
Economy L’ Sealer Sold Separately
Seal area 25” L x 19” W x 4”
PP-5600E “Economy” Fully automatic L’ Sealer with fixed belt speed, maximum speed of 20 PPM.
$19,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 50
Fully Automatic L’ Sealer with Attached Tunnel
PP-5300 Combo PP-5600 Combo “APA” Automatic Product Adjustment Now with Vertical Seal Head Design
Model Seal Size L x W x H
Description RETAIL
Standard PP-5300
Combo
19” x 16” x 6”
Variable speed drive 0-110 FPM,
40 PPM
Fully Automatic “Combination” L’ Sealer and tunnel built on same frame,” Delta PLC, Delta 7” Color Touch Screen with 40 program memory, Speeds to 40 PPM, Variable speed drive 0 to 95 FPM, product staging, , “APA”-Machine will automatically adjust infeed conveyor and inverting triangle to pre-set size, Motorized scrap windup with alarm, pinwheel hole punch, Single Piece Hot Knife seal bar, Locking casters
$32,500*
PP5300CS
Combo-SS
Stainless Steel Same machine as above in stainless steel. Mfg for USDA approval Wipe down only
$52,500
PP5600CS Combo 25” x 19” x 7” Same unit as above with large seal area 25” L x 19”W
$34,500*
PP5600CS Combo-S.S
Stainless Steel Same machine as above in stainless steel. Mfg for USDA approval Wipe down only
$55,500
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 51
L’SEALERS - FULLY AUTOMATIC cont’d
PP-5600CS *Vertical Seal Head Design with Center Seal” and PP-36F Flighted infeed shown
Model Seal Size
L x W x H
Description RETAIL
PP-5600CS 25” x 19” x 7” Delta PLC, Delta 7” color touch screen with 40 program memory, “APA” Automatic Product Adjustment-inverting head and infeed conveyor will automatically adjust to package size from one touch control panel, Variable speed drive- 0 to 110 FPM, Speeds to 40 PPM, Self diagnostics, motorized scrap windup with alarm, product staging, multi pack option, pinwheel hole punch, single piece hot knife seal bar, locking casters
$26,500*
PP-5600CS-SS Stainless Steel Same machine as above in stainless steel. Wipe down only, Mfg. for USDA Approval
$41,500
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 52
L’SEALERS - FULLY AUTOMATIC cont’d
PP-9070CS Shown
Now with Vertical Seal Head Design
Model Seal Size
L x W x H
Description RETAIL
PP9070CS 34” x 24”x 10” “APA” Automatic product adjustment-Infeed conveyor and inverting triangle will automatically
adjust to package size from one touch control
panel.
Speeds of 30 to 40 PPM, 4” minimum package length. Designed for use with polyolefin or polyethylene films.
Maximum package height 8”.
Delta 7”color touch screen with 40 Program
memory.
Center Seal Standard.
$32,500
PP9070CS-SS Stainless Steel Same machine as above in stainless steel
Mfg for USDA approval-wipe down only
Call for price
For Pricing on shrink tunnels to match these systems, please refer to the tunnel price sheets.
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 53
Options for Automatic L’ Sealers RETAIL
Closing Conveyor $1,950
Print Film Registration $1,875
Left to Right Product Flow $1,050
Export Crating $ 500
Non-standard voltage $1,200
Pneumatic Hole Punch Single Hole 3/16” $1,295
Dual Pneumatic Hole Punch-Two 3/16” Diameter Holes $1,895
PP-36B 3 ft Belted infeed conveyor, variable speed, adjustable side guides $2,850
PP-72B 6 ft Belted infeed conveyor, variable speed, adjustable side guides $3,800
PP-36F 3 ft Flighted infeed conveyor, variable speed, adjustable side guides $3,500
PP-72F 6 ft Flighted infeed conveyor, variable speed, adjustable side guides $5,995
6’ Flighted “Paddle” style infeed conveyor with 3” to 6” wide paddle widths available,
this conveyor is great for pushing multi product down the conveyor at one time
$6,500
Poly cord belt infeed conveyor for easy cleaning $2,500
Pneumatic product hold down for light weight products $1,995
Pneumatic air expeller-Helps evacuate air from bag prior to sealing $2,150
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 54
L’SEALERS – SEMI-AUTOMATIC
PP-1519L Shown
ECONOMY SERIES: L’ Sealer with “Band Seal Technology” (15”W x 19”L) L’ Seal area. Comes with Pin Wheel Hole Punch, Legs with casters. All units are 110 volt. Models PP1519L and PP1519LM available in a Table Top Version, deduct $100.00 for leg kit.
Model RETAIL
PP-1519L – L’ Sealer Only $2,195* PP-1519LM (Magnet Hold Down) $2,795* PP-1519LMC (Magnet Hold Down and Power Discharge Conveyor) $3,595*
*Asterisk indicates item in stock
PP-1622MK PP-1622MKA-V-PI Standard Series: Semi-Automatic L’ Sealer with magnet clamping, powered takeaway conveyor, cylinder arm return, “Micro Knife” seal system standard, stainless steel compensator assembly, automatic cycle timing, pin perf, Stainless steel film clamps, casters. “Micro Knife” *(MK) available on PP-1622 and PP-2028 models only. (Wire sealers use laminate strips under seal wire)
Model Seal Dimensions Power Volts Amps
Phase RETAIL
16”W x 22”L 220 15 1 PP1622-W or MK Wire or Micro Knife $4,900* PP1622-A Air operated-Pivots from back-Wire or Micro Knife $6,495 PP1622-MKA-V Micro knife-Air Operated- Vertical Seal Head with 8”
opening moves straight up and down. $7,695
PP1622MKA-V-PI Micro knife-Air Operated- Vertical Seal Head with 8” opening-Powered film unwind and Adjustable film inverting head-Seal head moves straight up and down.
$9,795
PP1622-HK Hot Knife-Constant heat with independent digital temperature controls.
$6,500*
PP1622-MK-SS # 304 Stainless Steel frame construction-Wipe down $8,950 *Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 55
L’SEALERS – SEMI-AUTOMATIC cont’d.
PP-2028MK Shown
Model Seal Dimensions Power Volts
Amps Phase RETAIL
20”W x 28”L 220 28 1
PP-2028W or MK Wire or Micro Knife $6,500*
PP-2028A Air Operated-Pivots from back -Wire or Micro Knife $7,900
PP-2028A-V Air Operated-Vertical seal head with 10” opening, seal head move straight up and down, Micro knife or wire
$8,800
PP-2028HK Hot Knife- Constant heat with independent digital temperature controls.
$7,900
PP-2028-SS #304 Stainless Steel frame construction-wipe down $10,900
Model Seal Dimensions Power Volts
Amps Phase RETAIL
20”W X 40”L 220 30 1
PP-2040W Wire Only $7,500
PP-2040A Air Operated-Std pivots from back $8,700
PP-2040A-V Air Operated-Vertical seal head-Moves straight up and down $9,900
PP-2040HK Hot Knife- Constant heat with independent digital temperature controls.
$8,900
PP-3040W Shown
Model Seal Dimensions Power Volts Amps Phase RETAIL 30” W x 40” L 220 30 1
PP-3040W Wire Only $8,850*
PP-3040W-A Wire- Air Operated-Std pivots from back $10,500
PP-3040W-A-V Wire- Air Operated-Vertical seal head with 12” opening $12,750
PP-3040HK Hot Knife $10,950
PP-3040-SS # 304 Stainless Steel-Wipe down Inquire
PP-3050W Wire Only $10,500
40” W x 50“ L 220 35 1
PP-4050W Wire Only $14,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 56
L’SEALERS – SEMI-AUTOMATIC cont’d.
PP-48ST PP-76ST PP-77ST (Larger Seal Area) “All-in-One” Sealer/Shrink Chamber: Compact L” Sealer and Hooded Shrink Chamber in one complete unit. Machine comes with “Band Seal Technology,” Dual Magnetic Hold Down for seal and shrink Cycle, Pinwheel Hole Punch, and locking Casters. PP-48ST add $295.00 for 220 volt
MODEL SEAL DIMENSIONS POWER VOLTS AMPS PHASE RETAIL
PP-48ST 12” W x 18.5” L 110/220 20 / 10 1 $2,650* PP-76ST 16” W x 22” L 220 25 1 $3,575* PP-76STC Power Discharge Conveyor 220 30 1 $4,995 PP-76ST-SS Stainless Steel 220 25 1 $4,575 PP-77ST 20” W x 30” L 220 30 1 $5,500
*Shown with optional PP180-24 curved conveyor
PP-1519EC Series Economy Combination Machine With “Micro Knife Technology”
Comes complete with console leg kit, casters, pin wheel hole punch and 8ft power cord
Model Size:
Sealer Size:
Tunnel RETAIL
PP-1519EC (Economy Combo) 15”W X 19”L 20”L X 16”W X 6”H $4,395*
PP-1519EC-SS (Stainless Steel) “ “ $6,850
PP-1519ECM (Economy Combo with Magnet Hold Down)
“ “ $4,995*
PP-1519ECM-SS (Stainless Steel) “ “ $7,750
PP-1519ECMC (Economy Combo with Magnet Hold Down and Powered Discharge Conveyor)
“ “ $5,995*
PP-1519ECMC-SS (Stainless Steel) wipe down. “ $9,250 PP180-24 Gravity roller curved conveyor 180 degree curved conveyor with 24” straight
section $1,195*
*Machines available in (110 volt-20 amp) or (220 volt-10 amp) service.
* Add $295.00 for 220-volt machine / * Add $275.00 for 8” tunnel height* 110-volt unit comes with
power cord and plug. 220 volt units comes with power cord “NO Plug”
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 57
L’SEALERS – SEMI-AUTOMATIC cont’d.
L’ Sealer and Tunnel Sold as a Set
PP-1622MK & PP1808-28 *Shown with optional PP180-36 gravity curvedconveyor
L’ Sealer comes with dual magnets, power discharge conveyor, casters and pin wheel hole punch. Tunnel has digital temperature control, variable air velocity, casters and leveling pads
Model RETAIL
PP-1622MK Sealer and PP1808-28 Tunnel sold as set $7,995*
Optional: PP180-36 180 degree Curved Conveyor with 36” straight section $1,395*
PP1622MK-Combo Shown *Shown with optional PP180-36 gravity curvedconveyor
Combo unit ships complete with dual magnet hold down, power discharge conveyor, casters, pin wheel hole punch. (L’ Sealer moves side to side and tunnel raises and lowers with crank handle)
Model RETAIL
L’ Sealer and tunnel built on common frame. L’ Sealer adjusts from side to side while tunnel adjusts up and down. One power source 220V, 1 phase, 45 amps.PP1622MK-Combo (Micro Knife) $ 8,995*PP1622MK-Combo-SS #304 Stainless Steel-Wipe down. $14,950PP1622HK-Combo (Hot Knife) $10,450PP1622MKA-Combo (Micro Knife-Air operated)Air Operated Dual Push Button Operation with Automatic Cycle Timing
$ 9,975*
PP1622MKA-Combo-SS “Air Operated Seal Head”, #304 StainlessSteel-Wipe down.
$15,950
Optional: PP180-36 180 degree Curved Conveyor with 36” straight section $ 1,395* *Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 58
L’SEALER ACCESSORIES
Description RETAIL
Adjustable Film Inverting Head PP1622 $1,050
“ PP2028 $1,350
“ PP3040 $1,850
Powered Film Unwind PP1622 20” Film $1,050
“ PP2028 25” Film $1,500
“ PP3040 35” Film $2,000
Product tray-Stainless steel PP1622 $ 400
“ PP2028 $ 535
“ PP3040 $ 675
Film Rack for PP1622 $ 400
“ PP2028 $ 475
“ PP3040 $ 650
Electric Hole punch-3/16” Diameter hole $1,395
Pinwheel Hole punch $ 195
Non-Standard Voltage For U.S $ 995
Left hand sealers $1,050
Paint-Custom color $ 550
Export Crating $ 400
PVC Teflon Diaper Seal Wire Covers $ 350
Remote/Portable Film Scrap Take Up Wheel $ 795
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 59
LABEL DISPENSERS
U-25 U-45 U-60 Model RETAIL
U-25 NEW, LOW COST Label Dispenser! Power advance for roll labels to 2.5” width. Tension guide is standard for thin labels. Optional reverse switch available for labels under .5” length/width. With Photo Eye
$475
U-45 Power advance for one-up computer forms, or printed labels in rolls 3/8”-4.5” wide at 6” per second speed. U-45HS High Speed version 11” per second for any length label! Includes photo eye.
$675
$695
U-60” High Speed power advance for larger labels in rolls up to 6” wide, at 9” per second. With Photo Eye
$735
Bottle- Matic Model MSRP
Bottle-Matic 1 16” width cylinder labeling machine. Label any cylindrical object fast and accurately FRONT AND BACK using one single label from .5” to 9” dia.* at speeds of 950 Pcs. Per hour! Bottle-Matic is the perfect machine for labeling your cylindrical objects! It can wrap your bottles, cans, tubes, and jars by simply pressing the foot-switch! We can even do tapered objects without customizing!
$1,850*
Bottle-Matic 2 16” same unit as described above with the ability to apply 2 individual labels to the front and the back of the same bottle.
$2,325
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 60
LABEL MACHINES-AUTOMATIC
ELF-20 Table Top ELF-50 Table Top Top Labeler Wrap Around Labeler
MODEL DESCRIPTION RETAIL
ELF-20 Table top- Top labeler $8,945
ELF-50 Table top-Wrap around labeler $9,945*
PL-211 PL-221 PL-501
MODEL DESCRIPTION RETAIL
PL-211 Top Labeler $14,990*
PL-211CS Top/front/bottom clamshell labeler $22,990
PL-221 Top and Bottom Labeler $24,990
PL-231 Bottom Labeler $17,990
PL-501 Vertical Wrap around Labeler $18,990
PL-622 Front and Back Labeler $36,990
PP-610 Top labeler with side folder, includes conveyor-Applied label to top and wraps label down both sides
$17,500
PP-625 Side Apply Labeler with 16” wide Conveyor $14,995
PP-650 Front and Back Labeler with Tilt Heads for tapered containers $37,500
PP-800 Front or Back panel labeler with conveyor $22,500
PP-850 Side and Back with conveyor $18,500
Optional Item Description RETAIL
Clear Label Sensor $1,350
Elf Hot Stamp Printer $3,950
PL Label Head Tilt Feature $1,950
Allen Hot Stamp Printer (for Pro Series only) $6,495
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 61
LABEL MACHINES
PL-10 label head on stand
Labeling Heads on Post Mounted Stand
MODEL DESCRIPTION RETAIL
ELF-10 4.5” Label Width w/Controller $7,445 PL-10 6.0” Label Width w/Controller $9,990 PRO 15 7.8” Label Width w/Controller $10,995
Stainless Steel Turntables
TT-600 600mm (24”) Diameter Turntable $4,995 TT-1000 1000mm (39”) Diameter Turntable $5,995
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 62
MAIL WRAPPERS / BAGGERS
Mailwrapper-280 Mailwrapper-280 w/discharge conveyor
*Great for magazines, periodicals, instruction booklets or loose sheets of paper
Model RETAIL
Mailwrapper-280 Width: 7”min – 11” max Length: 3” min – 17” max Cycle speed of 20-25 PPM 110 volt, 10 amp
$6,995
Optional Discharge Conveyor $1,595
Additional forming plow for ¾” product $ 295
SW Poly film rolls for 8 1/2” x 11” x ¼” magazine the recommended film size is 20” x 1.25 mill x 4,600 ft
$ 106
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 63
METAL DETECTION EQUIPMENT
ENTRY LEVEL-Metal Detector-Hawk 15 BPM-100 Free fall/Gravity feed ring type metal detector
MODEL Description Max Pkg Size RETAIL
Hawk-10 Metal detector-Stainless Steel construction-Wipe down, touch screen control, Fixed Belt speed
at 20m/64FPM, Plastic Intralox type belting.
MD-3010 11.8” w x 3.9”H MD-4010 15.7” w x 3.9”H MD-5010 19.6” w x 3.9”H MD-6010 23.6” w x 3.9”H
$13,500 $13,750 $13,950 $14,500
Hawk-12 Metal detector “
MD-3512 13.7” w x 4.7”H MD-4512 17.7” w x 4.7”H MD-5512 21.6” w x 4.7”H
$13,750 $13,800 $14,500
Hawk-15 Metal detector “
MD-3015 11.8” w x 5.9”H MD-4015 15.7” w x 5.9”H MD-5015 19.6” w x 5.9”H MD-6015 23.6” w x 5.9”H
$13,750 $13,900 $14,450 $14,900
Hawk-20 Metal detector “
MD-3520 13.7” w x 7.8”H MD-4520 17.7” w x 7.8”H MD-5520 21.6” w x 7.8”H
$13,950 $14,450* $14,800
Hawk-25 Metal detector “
MD-3025 11.8” w x 9.8”H MD-4025 15.7” w x 9.8”H MD-5025 19.6” w x 9.8”H MD-6025 23.6” w x 9.8”H
$14,750 $14,950 $15,250 $15,595
Hawk-30 Metal detector “
MD-5530 21.6” w x 11.8”H MD-6030 23.6” w x 11.8”H
$15,500 $15,995
BPM-100 Free fall/Gravity feed ring type metal detector
4” Dia (100mm) Ring opening
$11,400
BPM-200 Free fall/Gravity feed ring type Metal detector
8” Dia (200mm) Ring opening
$12,750
Optional Item Description RETAIL
Package Reject-Pusher Style with plexi-glass safety cover $1,995
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 64
Pusher rejecter with lockable stainless steel bin $2,500
Package Reject-Air Blast Style $1,295
Stack Light-2 Position, Green on-Red Reject with or w/o belt stop $ 350
Beacon Light W/Alarm-When rejects, alarm will sound and red light will appear. $ 450Variable speed drive $ 595Stainless steel locking casters $ 350*Asterisk indicates item in stock
S+S Brand of High Quality- Metal Detection Equipment
High performance metal detection solutions that include attention to Food Safety withinthe Sanitary design.
Compliance with HACCP and IFS Standards Disassembles in minutes without tools Clean design to IP-65 and IP-67 standards, TCP/IP Network Compatible: Ethernet interface (TCP/IP 100 Mbit/s). WLAN Interface: With integrated aerial (802.11 b/g). Hard Copy Printed Reports: Optional production reports via log printer. USB Interface: Export data from log file or user and system data (available in combination with touch screen option). Barcode Scanner Interface: Serial interface for remote product change using a barcode
scanner. Profibus Interface: PLC data highway Construction: 304 stainless steel; angle and tube frame with food approved plastics
MODEL NO. DESCRIPTION RETAIL
Genius 12” Wide Aperture x 4” H Conveyor speed up to 200 FPM (110volt)
$18,995
Genius Plus Color touch screen 5.7” with larger aperture $19,500Optional Reject Bin $ 2,400
High Quality- Metal Detection Equipment
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 65
POLY BUNDLER/SLEEVE WRAPPERS
SEMI-AUTOMATIC: Sleeve wrapper with attached tunnel.
Dual push button operation with pneumatic pusher bar to advance product through seal area, Delta PLC controller, digital temperature controls, pneumatic product hold down, metal mesh tunnel conveyor with cooling fan. Speeds of 5 to 15 PPM depending on product size and film thickness.
*SFE-800SA Shown
Model
Power Volts/
Amps/Phase
Seal
Size
Max
Roll Width
Max pack Lt. Tunnel
Size L x W x H
RETAIL
SFE-800SA 220 60 3 29.5” 27” 19.5” 40 x 29 x 17 $24,650
SFE-1100SA 220 70 3 41¾” 39” 19.5” 44 x 40 x 20 $28,250
SFE-1500SA 220 80 3 57” 54.5” 27” 55 x 56 x 20 $34,800
SFE-1800SA 220 80 3 68” 65 36” 72 x 67 x 24 $45,000
Inline Fully Automatic: Sleeve wrapper with attached tunnel, Delta PLC Controller Power belt infeed conveyor with photo to activate cycle start, pneumatic product hold down, dual power film unwind, metal mesh tunnel conveyor belt, discharge cooling blower. Speeds of 5 to 20 PPM, depending on product size and film thickness.
*SFE-800NF Shown
Model
Power Volts/
Amps/Phase
Seal Size Max Roll Width
Tunnel Size
L x W x H
RETAIL
SFE-800NF 220 60 3 29.5” 27” 59 x 27 x 18 $31,500*
SFE-1100NF 220 70 3 41¾” 39” 44 x 40 x 20 $35,500
SFE-1500NF 220 80 3 57” 54.5” 60 x 56 x 20 $45,950
SFE-1800NF 220 80 3 70” 65.5” 72 x 70 x 20 $65,950
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 66
POLY BUNDLER/SLEEVE WRAPPERS
• Right angle, Fully automatic, with attached tunnel.
*SFE-800AU Shown
Right angle infeed conveyor with dual photo eye operation. Multiple stroke count will allow for many different product configurations 3x2, 5x2, 3x5, etc 6, 8, 12, or 24 packs. Delta PLC Controller
*Production rate of up to 15 PPMdepending on Pkg. Size and configuration.
Model Power Volts/
Amps/Phase Seal Size
Max Roll Width Max Pack Lt. Tunnel Size L x W x H RETAIL
SFE-800AU 220 50 3 29.5” 29.5” 19.5” 40 x 29 x 17 $35,950
SFE-1100AU 220 60 3 41¾” 39” 19.5” 44 x 40 x 20 $40,600
SFE-1500AU 220 65 3 57” 54.5” 27” 55 x 56 x 20 $48,500
Optional items RETAIL
1 Increase Max Package height by 4” SE600 and 800 models only. $ 500
2 Increase Tunnel height by 4” SE600 and 800 models only.
$ 600
3 Increase tunnel height to 24” SE1100 and SE1500 models only
$1,850
4 Side compression Rollers at end of tunnel chamber to mat down poly film $ 595
5 Dual Lane diverter-Accumulates product and makes one push for higher speeds.
$7,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 67
POLY BUNDLER/SLEEVE WRAPPERS
POLY SHRINK TUNNELS ONLY
Model Power Volts/Amps/Phase
Chambers Size
RETAIL L W H
SE- 600 220 25 3 32” 21.5” 15” $ 9,450
SE- 800 220 40 3 40” 29.5” 17” $10,600
SE-1100 220 55 3 44” 41” 20” $12,850
SE-1500 220 60 3 55” 57” 20” $17,250
* ALL TUNNELS FEATURE HEAVY DUTY ZINC PLATED METAL MESH BELTING WITH COOLINGTOWER.
TUNNEL OPTIONS
Description: RETAIL
1. Increase Tunnel Height by 4” on Models 600 and 800. $ 500
2. Add 12” length to any tunnel. $1,425
3. Increase Tunnel height to 24” on SF-1100 and 1500 models only. $1,850
4. Non Standard Voltage 480 volt 3 phase $1,050
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 68
RIBBON BLENDERS / MIXERS
Ribbon Blender Ribbon Blades
Bottom Valve Discharge Safety Cover
MODEL DESCRIPTION RETAIL
MXB-50 1.5 cubic ft - 10 gallon or 65 lb capacity - 1 HP Motor $7,995
MXB-100 2.5 cubic ft –19 gallon or 71 liters- 125 lb capacity – 2 HP Motor $8,995
MXB-150 3.5 cubic ft –28 gallon or 180 lb capacity – 2 HP motor $11,500
MXB-200 5 cubic ft –37 gallon or 141 liters- 250 lb capacity – 3 HP Motor $13,500
MXB-300 7.5 cubic ft – 60 gallon or 375 lb capacity – 3 HP motor $15,550
MXB-400 10.5 cubic ft- 75 gallon or 282 liters- 500 lbs capacity – 5 HP motor $17,500
MXS-1000 21 Cubic ft – 150 gallon or 570 liters, 1000lb capacity-10 HP motor $24,950
MXS-1500 31 cubic ft– 225 gallon or 850 liters, 1,500 lb capacity-12 HP motor $29,950
MXS-2000 42 cubic ft-300 gallon or 1132 liters, 2000 lb capacity-15 HP motor $34,500
All units 220 volt, 3 Phase Power Manufactured in #304 Stainless Steel
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 69
SHRINK FILMS-POLYOLEFIN
Quick Shrink- 201 General Purpose Multi Layered Shrink Film 50 gauge 60 gauge 75 gauge 100 gauge
No Min Order $7.14 $7.14 $7.14 $7.14
CF Length 5,280 ft 4,375 ft 3,500 ft 2,625 ft
SW Length 10,560 ft 8,750 ft 7,000 ft 5,250 ft
Quick Shrink- IR High Performance Cross-linked Irradiated Film 45 gauge 60 gauge 75 gauge 100 gauge
No Min Order $9.30 $8.57 $8.57 $8.57
CF Length 5,820 ft 4,375 ft 3,500 ft 2,625 ft
SW Length 11,640 ft 8,750 ft 7,000 ft 5,250 ft
1. All pricing is per inch of width FOB: Ontario, CA2. Pre-paid freight $2,000 West Coast, $2,500 Mid West, $3,000 East Coast3. Pre-Perforated film available upon request (add 5% to price)4. Printed film available in QS-201 and QS-IR (100 roll minimum, 3 color process) Call for pricing
*Stock roll widths from 8” to 24”*Film sizes can be mixed to maximize weight for free shipping*Shipping weight is based on 2.4lbs per inch of width*Quick Shrink films comply with FDA requirements for direct food contact.
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 70
SHRINK TUNNELS
*PP1606-20 Shown
Compact portable Light Duty shrink tunnel with live roller rod conveyor, re-circulating air chamber, digital temperature control, AC variable speed drive conveyor, automatic cool down with shut off. Legs and Locking casters. Available in 110 volt or add $250.00 for 220 volt. Table top units available-Deduct $100 if ordering table top tunnel.
* “New for 2013” viewing window now standard on most models *Model Chamber size Volts Amps. Phase RETAIL
PP1606-20 110v 20”L x 16W x 6”H 110 20 1 $2,195*
PP1606-20 220v 20”L x 16’W x 6”H 220 10 1 $2,445*
PP1606-20/SS Stainless Steel 110 20 1 $4,595
PP1808-28 PP1808-28-SS
Compact General Purpose shrink tunnel with live roller rod conveyor, AC variable speed drive, variable air velocity control, digital temperature control. Fully re-circulating air system. Automatic cool down with shut off. ½ HP Blower Motor, 7.5KW heater bank
Model Chamber size Volts Amps. Phase RETAIL
PP1808-28 28”L x 18’W x 8”H 220 40 1 $4,595*
PP1808-28 SS Stainless steel $8,950*
PP1808-44 PP1808-44-SS
Medium capacity production shrink tunnel with live roller rod conveyor, AC variable speed drive, variable air velocity, re-circulating air system, digital temperature control. Automatic cool down with shut off. 1HP Blower Motor, 9 KW heater bank
Model Chamber size Volts Amps. Phase RETAIL
PP1808-44 44”L x 18”W x 8”H 220 40 1 $ 6,595*
PP1808-44-SS Stainless steel 220 40 1 $11,950*
*Asterisk indicates item in stock All stainless steel shrink tunnels designed for wash down only Stainless steel tunnels MFG for USDA Approval
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 71
SHRINK TUNNELS
PP2208-48 Shown
High capacity production shrink tunnel with variable air velocity, re-circulating air system, digital temperature control, live roller rod conveyor. Automatic cool down with shut off. 1 HP Blower Motor, 15 KW heater
Model Chamber size Volts Amps. Phase RETAIL
PP2208-48 48”L x 22”W x 8”H 220 50 3 $ 8,250*
PP2208-48-SS Stainless steel 220 50 3 $15,250
PP2612-52 52”L x 26”W x10”H 220 50 3 $ 9,450*
PP3610-60 PP3628-60 with viewing window High capacity production shrink tunnel with all of the above features, including Dual 1 HP blower motor system and dual 15 KW heater banks, Dual variable air velocity controls, live rollers, and a 60” long chamber.
Model Chamber size Volts Amps. Phase RETAIL
PP3610-60 60”L x 36”W x 10”L 220 50 3 $10,500*
PP3610-60-SS Stainless steel 220 50 3 $19,500
PP4510-60 60”L x 45”W x 10”L 220 60 3 $16,950
PP5520-72 72” L x 55” W x 20” H 220 60 3 $19,500
PP6520-96 96” L x 65” W x 20” H 220 60 3 $22,500
High Speed Shrink Tunnels
High speed shrink tunnel with Dual Chamber controls. Dual 1 HP blower motors, Dual 15 KW heater banks, Dual air velocity controls, live roller, rod conveyor re-circulating air system. Recommended for high speed applications.
*PP1808-72 shown
Model Chamber size Volts Amps. Phase RETAIL
PP1808-72 72”L x 18”W x 8”L 220 50 3 $11,950*
PP1808-72-SS Stainless steel 220 50 3 $21,950
PP2210-72 72”L x 22”W x 10”L 220 60 3 $14,250
PP2210-72-SS Stainless steel 220 60 3 $25,350
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 72
SHRINK TUNNELS
Shrink Bundling Tunnel with (Dual Chamber) Dual 1 HP blower motors, dual 15 KW heater banks, dual digital temperature control, dead roller conveyor system, variable air velocity, re-circulating air system. Cooling fans on discharge end of tunnel.
Model Chamber size Volts Amps. Phase RETAIL PP2216-60 60”L x 22”W x 16”L 220 60 3 $10,950*
PP3616-60 60”L x 36”W x 16”L 220 60 3 $11,950*
PP2620-72 72”L x 26”W x 20”L 220 60 3 $12,250
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 73
Tunnel Accessories TUNNEL ACCESSORIES RETAIL
Added tunnel height 2” increments for model PP1606-20 $ 275
Added tunnel height 4” increments up to 28” max height $ 525
Non-standard voltage $1,350
Paint – Custom colors $ 500
High density roller kit PP1808-28 $ 275
(rollers on 1” centers, ½” spacing) PP1808-44 $ 395
“ PP1808-72 $ 600
“ PP2208-48 $ 550
“ PP2610-52 $ 550
“ PP3610-60 $ 775
Teflon mesh belt overlay Kit PP1606-20 $ 295
“ PP1808-28 $ 350
“ PP1808-44 $ 395
“ PP1808-72 $ 495
“ PP2208-48 $ 450
“ PP2610-52 $ 495
“ PP3610-60 $ 585
Stainless steel metal mesh belting PP1808-28 $ 600
“ PP1808-44 $ 700
“ PP1808-72 $ 900
“ PP2208-48 $ 995
“ PP2610-52 $1,150
“ PP3610-60 $1,326
Heavy Duty Plastic Falcon Belting PP1808-28 $1,500
“ PP1808-44 $1,900
“ PP1808-72 $2,501
“ PP2208-48 $2,200
“ PP2610-52 $2,500
“ PP3610-60 $3,200
TPF system (Thin Package fixture) PP1808-28 $ 995
Adjustable floating upper roller PP1808-44 $1,495
assembly will shrink Pkg flat. PP1808-72 $1,595
l PP2208-48 $1,595
Export Crating $ 400
Infeed or Discharge Extensions (per foot) $ 600
Side guide rails in tunnel $ 400 Std roller spacing on 1.5” centers = 1” gap Hi Density rollers on 1” centers = ½” spacing Tunnel height from floor to conveyor is 32” Minimum-36” Max Optional Tunnel Conveyor Types Available:
Falcon Belting Stainless Steel Metal Mesh Teflon Mesh Belt Hi Density Rollers ½” Space
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 74
Shrink Banding Tunnels
Great for tamper evident neck bands, safety sleeves, pill bottles, jars, food containers and other similar containers.
PP-BS4C (Stainless Steel)
MODEL NO. DESCRIPTION RETAIL
PP-BS4C Tamper evident shrink banding heat tunnel for bottle caps with variable speed conveyor. #304 Stainless Steel Frame Tunnel height is adjustable. Max bottle Dia: 4” (100mm) Max bottle height: 2”-15 ¾” (50-400mm) Machine dimension: 59”L x 18”w x 58”H Electrical: 220 V, 1 phase, 20 amp
$7,595
PP-BS8C Same unit as above with larger tunnel opening of 8” wide $8,350
PP-BS10C Same unit as above with larger tunnel opening of 10” wide $8,950
PP-BS4 Same tunnel as above with no conveyor adjustable stand-4” opening
$6,500
PP-BS8 Same tunnel as above with no conveyor, adjustable stand-8” opening
$6,900
PP-BS10 Same tunnel as above with no conveyor, adjustable stand-10” opening
$7,350
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 75
Shrink Banding Tunnels
PP-48SBTC-SS (with conveyor) PP-48SBT-SS PP-1230X MODEL NO. DESCRIPTION RETAIL
PP-48SBTC-SS (With Conveyor) Fully body sleeves or neck bands shrink tunnel with variable speed conveyor and adjustable heat control. Infra red heaters, stainless steel belt, variable speed conveyor with adjustable side guides.#304 Stainless Steel frame construction
Tunnel Dimensions: 48”L x 6” w x 6”H
Conveyor Dimensions: 79”L x 8” w x 36” H
Electrical: 220v 1 phase 35 amp
$9,500
PP-48SBT-SS No Conveyor- Shrink banding tunnel for neck bands in stainless steel construction.Will fit over any existing conveyor line. Adjustable crank handle allows for proper tunnel height.
$6,995
PP-1230X Shrink tunnel for full body sleeves or neck bands without conveyor. This unit is designed to fit over most any existing conveyor line. Painted Frame. Chamber size: 59” (1500mm) L x 6.75” (170mm) W x 12.5”317mm) H 220 volt, 1 phase 40 amp
$5,500
PP-1230 PP-2535 PP-1230SBT Shrink banding tunnel for fully body sleeves or neck bands. Features live roller
conveyor with close roller spacing. Adjustable air dampeners on both sides of chamber. Dual blowers with digital temperature control. Conveyor length is 71” Long, Chamber size is 59” l x 6 ¾” W x 12.5” H
Electrical: 220 volt, 1 phase, 50 amp
$5,800
PP-2535SBT Same tunnel as described above with larger chamber area.Tunnel has 14” wide opening x 12” high.
220 volt, 3 phase
$6,800
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 76
SHRINK SLEEVE APPLICATOR
PP-77 Shown with no ConveyorPP-77 Shrink Sleeve Labeling Machine in Stainless Steel construction, Delta color touch screen. High-speed shrink sleeve labeling machines are designed for full body sleeve labeling applications, as well as neck and cap banding, tamper-evident applications. The PP-77 is well-suited for a wide variety of industries and applications, although the tamper-resistant “neckbander” is ideal for beverage, pharmaceutical and cosmetic companies.
The shrink sleeve labeling machines are controlled by the Panasonic Servo System, which is based on an advanced brushless motor system that provides fast and accurate output. The high speed system features an adjustable shooter that can be easily set for different label lengths to accommodate all shrink sleeve applications.
Voltage – 110/220VAC, 50/60HZ 1 Phase 20AMP Dedicated Power – 1KW Controls – 3.5” Delta Color Touch Screen PLC – Panasonic FP0R Cutter Drive – Pneumatically Driven Film Feeding Device – Sanyo Stepper Motor Film Dispenser - Pneumatically Driven Maximum Sleeve Speed – 100 BPM Film Length – 120mm (4.72”) Film Size – 22mm – 180mm (.87”- 7.09”) Range of Bottle Diameter – 30mm – 90mm (1.18”- 3.54”) Maximum Bottle Height – 350mm (13.8”) Film Unwind Plate – 400mm (15.7”) Spool Core – 127mm–254mm (5”– 10”) Dimensions W-D-H – 675mm x 1030mm x 1980mm (26.6” x 40.6” x 78”) Net Weight – Approx 150 kgs (331 lbs)
MODEL NO. DESCRIPTION RETAIL
PP-77 Automatic Shrink Sleeve Applicator 100 BPM $19,995
PP-77 with Conveyor With 2 meter (6.5ft) of conveyor $26,500
Cutting Knife Extra cutting knife $ 2,500
Mandrel Opens film over bottle $ 795
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 77
SHRINK SLEEVE APPLICATOR
PP-10 Shown with no conveyor Same as PP-77 with faster speeds and lager capacity label and bottles sizes
Voltage – 110/220VAC, 50/60HZ 1 Phase 20AMP Dedicated Power in KW – 1.5 Controls – 5.7” Delta Color Touch Screen PLC – Panasonic FP0R Cutter Plate, 4 blades - 22mm – 60mm (.87” – 2.36”) Conveyor Dimensions L-W-H – 3000mm x 110mm x 900mm (118” x 4.3” x 35”) Conveyor Motor – Siemens AC ½ HP Maximum Sleeve Speed – 200 BPM Film Length – 120mm (4.72”) Film Size – 22mm – 250mm (.87”- 9.84”) Range of Bottle Diameter – 22mm – 125mm (.87”- 4.92”) Maximum Bottle Height – 350mm (13.8”) Film Unwind Plate – 500mm (19.7”) Spool Core – 127mm–254mm (5”– 10”) Motor Controls – Schneider Servo Motor Machine Dimensions W-D-H – 3000mm x 1100mm x 2000mm (118” x 43” x 78.7”) Net Weight – Approx 250 kgs (551 lbs)
MODEL NO. DESCRIPTION RETAIL
PP-10 Automatic Shrink Sleeve Applicator 200 BPM $39,950
PP-10 with Conveyor With 2 meter (6.5ft) of conveyor $44,395
Cutting Knife Extra cutting knife $ 2,500
Mandrel Opens film over bottle $ 795
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 78
SHRINK SLEEVE APPLICATOR
PP-150S ShownThe Model PP-150S is an automatic shrink sleeve applicator capable of running lay flat tubing of up to 200mm (7.8”) wide with a cut length from 40mm-200mm (1.5”-7.8”) at up to 150 BPM. The PP-150S will handle bottles from 28mm-125mm (1.1”-4.9”) in Diameter and up to 320mm (12.5”) Tall.
The PP-150S is ideal for a wide variety of shrink sleeve labels and container types. The bottles are feed on a conveyor through a separating worm gear. The system feeds a specified length of film from a film feed system through a "roller" arm system. The film then moves through a registration sensor and on to the "mandrel" assembly for high accuracy film indexing using a high speed fiber optical sensor. The systems mandrel opens the film and the film is then fed through the machine via a tractor feed assembly. This assembly feeds a specified cut length using servo motors. The film is then cut at the specified length by passing through the servo motor driven rotary cutter assembly. The film is then driven onto the product by use of a high speed film delivery assembly.
MODEL NO. DESCRIPTION RETAIL
PP-150S Automatic Shrink Sleeve Applicator $49,995
Mandrel Opens film over bottle $895/ea
Worm Gear Screw Separates bottles on conveyor line $595/ea
Cutting Knife $2,500
Conveyor 4 1/2” wide sanitary stainless steel slat conveyor with variable speed drive, washdown motor
$550/per ft
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 79
Typical Production line with Shrink Sleeve applicator and Steam Shrink Tunnel
Machine
Machine model PP-150S
Capacity 150 BPM
Size L*W*H 2100*850*2000mm (83”L x 33.5”W x 79”H )
weight 600Kgs (1320lbs)
Powder supply AC 3-Phase 220/380V
Eligibility percent ≥99.5%
Host machine powder 2KW
Shrink labels
Materials PVC、PET、OPS
Thickness 0.03~0.13mm
Labels Length 40~200Mm (1.5”-7.8”)
Flat width Max200Mm (7.8”)
Inner Dia. Of Labels roll Standard 76mm (3”)
Bottles to pack
Height Max320mm (12.6”)
Diameter Ø 28- Ø125mm (1.1”-4.9”)
Material Glass、Metal and Plastic
Shapes Round , Square, Flat , Curved Cup-Shaped Bottles
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 80
Steam Tunnels
PP-2000M Steam Tunnel Only PP-2000M shown with Conveyor
Model RETAIL
The PP-1200M with 48” long chamber x 13.7” H made of # 304 Stainless Steel steam tunnel is easy to operate, easy to maintain and easy to clean. It is designed to efficiently shrink full body shrink bands on almost any container type and almost any shrink film material. The low pressure steam drum distributes steam evenly with a with an integrated steel tube design. There are steam jet tubes in each section of the tunnel which are adjustable for both height and steam output. The shell of the tunnel is constructed of #304 stainless steel and there is also a stainless steel water collecting plate to collect the condensate water. The machines stainless steel, water-proof design makes it easy to clean and maintain
Model PP-1500M Same as described above with 60” long chamber x 13.7” H
Model PP-2000M Same as described above with 80” long chamber x 13.7” H (Boiler sold separately-See next page)
Conveyor is sold separately, Plastic slat top conveyor x 4” wide (sold per ft) Includes variable speed drive (See page 83)
$ 7,900*
$ 8,950*
$10,500*
$495/ft*
*Asterisk indicates item in stock
Specification:
Tunnel Opening: (48”), (60”) or (79”) long x 5 3/4” wide x 12” high Steam Tubes: 6 adjustable tubes in 3 sections of tunnel (2 sections in PP-1200m) Construction Material: # 304 Stainless Steel Main Wall Power: 220V / 3 Phase / 50/60 Hz / 30 Amps Max. Electro-Thermal Power: 18 Kilo watts Steam Pressure: 3.62 – 5.80 PSI Overall Machine Size: 48”, 60” and 80”L x 22” W x 48” H Machine Weight: 510 LB (230kg) Steam Consumption: 55 LB /hour (24kg/h) Conveyor Speed: 0—100 feet /min
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 81
CONVEYORS-Narrow width Plastic or SS belting
PP-108SS Shown - Stainless Steel frame construction, available with either Plastic Slat Top or Stainless Steel Conveyor Belting, Standard width is 4”.
MODEL NO. DESCRIPTION RETAIL
PP-72SS 6 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction
$2,970
PP-108SS 9 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction
$4,455
PP-144SS 12 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction
$5,940*
PP-180SS 15 ft Plastic slat top or stainless steel conveyor belting, 4” wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction
$7,425
PP-30 Shown (Steam Generators sold Separately)
The steam generators are an integrated system, National board of PVI inspected, ASME Coded, UL Listed, Canadian UL Listed. Note: It is the responsibility of the customer to conform to any state or local codes.
This steam generator design consists of a high pressure chamber filled with water that is heated by submerged electric heaters. Automatic controls are provided to maintain the pre-set operating pressure and water level. Safety features include automatic low water cutoff, dual pressure controls, safety valve and visible water level gauge.
Main Wall Power: 220 Volt, 3 Phase, 50/60 Hz, 84 Amps Max. (480 Volt, 3 Phase, 37 Amp also available) Electric Rating: 30 KW Developed Boiler Horsepower: 3.0 Steam Capacity (at 212F)lbs/Hr: 103.5 Gross BTU Output: 100,400 Overall Dimensions: 26” L x 19” W x 23” H Steam Inlet: ½” Steam Outlet: ½” Weight: 200 lbs. (91kg)
Model KW Volts Amps Phase BHP Steam Capacity Lb/Hr at 212F
Gross BTU Retail
PP-20 20 220 56 3 2 69 67,000 $6,995*
PP-25 25 220 70 3 2.5 86 83,750 $7,500*
PP-30 30 220 84 3 3 103.5 100,400 $7,995*
PP-40 40 480 49 3 4.0 138 133,900 $8,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 82
SIDE SEAL MACHINES-Intermittent and Continuous Motion
INT-20-2 Belt CM-20 Model Seal Size
L x W x H Description RETAIL
INT-20-2 Belt Std Model 40 PPM
20” wide cross seal 8” high opening unlimited length. Max package width 16”
“APA” Automatic Product Adjustment-Infeed conveyor and Inverting triangle will automatically adjust to package size from one touch control panel.
Delta 7”color touch screen with 40 Program memory.
Servo Drive Technology Rotary wheel side seal after end seal. Speeds of 30 to 50 PPM, 4” minimum package length. Designed for use with polyolefin or polyethylene films. Maximum package height 8”. Center Seal Standard.
The side seal automatically adjusts to package height setting on the Servo model.
$32,500*
Stainless Steel $46,500
INT-20 2 Belt Servo Model 50 PPM
(1) Axis servo drive motor, no air required!
Servo drive offers higher speeds to 50 PPM, Automatic adjustment of seal head position, infeed conveyor and side seal.
$36,500
Stainless Steel made for USDA approval
$52,500
INT-20-3 Belt Same as above Rotary wheel side seal prior to end seal. 30 to 50 PPM. Maximum package height 8”. Center seal Standard. 3 Belt provides for automatic product separation.
$39,600
INT-30-2 Belt 30” cross seal Max package width 26”
Rotary wheel side seal after end seal. Max package height 10”
Speeds up to 50ppm
$40,500
INT-30-2 Belt
Stainless Steel
Same as above Wipe down only-Made for USDA approval $57,850
INT-30 3 Belt Same as above Rotary wheel side seal prior to end seal. 3 belt design allows for automatic product separation.
$44,500
SS Version Stainless Steel Wipe down only-made for USDA approval $63,595
INT-40-2 Belt 40” cross seal Max package width 35”
Rotary wheel side seal after end seal. Max package height 12” 3 Belt provides for automatic product separation.
$52,650
Stainless Steel Stainless Steel Wipe down only-made for USDA approval $75,250
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 83
CM-20 “Continuous Motion” Side Seal
MODEL NO. DESCRIPTION RETAIL
CM-20 Hi Speed “Continuous Motion” rotary wheel side seal with Servo-Drive technology. 7” Delta color touch screen with “APA” Automatic Product Adjustment-Infeed conveyor and Inverting triangle will automatically adjust to package size from one touch control panel. 50 program memory. Servo Drive Technology Rotary wheel side seal before end seal. Speeds of 60 to 75 PPM, 4” minimum package length. Designed for use with polyolefin or polyethylene films. Maximum package height 8”, 20” Hot knife cross seal bar. Variable speed drive 0-100 FPM. 3 belt design provides for automatic product separation. (Infeeds sold separately)
220v 1 phase 20 amp
$55,500*
CM-20-SS Same machine as described above in #304 stainless steel construction, (wipe down only)
$98,750
SIDE SEAL MACHINE OPTIONS Options for Side Seal Machines RETAIL
Closing Conveyor $1,950 Export crating $ 800 Non-standard voltage $1,200 Print Film Registration $3,500
Increase Package Height to 12” Maximum (INT models only) $5,000
3 ft Belted infeed conveyor w/adjustable side product guides $2,850
6 ft Belted infeed conveyor w/adjustable side product guides $4,000
3 ft Flighted infeed conveyor w/adjustable side product guides $3,500
6 ft Flighted infeed conveyor w/adjustable side product guides $5,995
6 ft flighted “Paddle Style” infeed conveyor with 3” to 6” wide paddle widths available $6,500
6 ft Flight Bar infeed conveyor, great for multi-packing of products $7,500
Extended infeed conveyor (3 ft sections) $3,500
Hole punch ¼” $3,895
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 84
STRAPPING MACHINES
MODEL RETAIL
SP-1 $ 950
Fixed Base, Enclosed cabinet, uses 3/8” or ½” strap, Mechanical Tension
Control, casters
SP-1SS $1,785
Stainless Steel
SP-1L $ 950
Low Table Height, Mechanical Tension Control
SP-1SL $1,150
Super Low Table Height, Mechanical Tension Control
SP-4 (Our most popular model) $ 950*
Adjustable Height, uses 3/8” or ½” strap, Mechanical Tension control, casters
SP-4SS Stainless Steel $1,850
SP-4U Fixed table height. Mechanical tension control $ 950
SP-4E Adjustable Table Height, Electronic Tension Control $1,050
SP-4ED Adjustable Table Height, Electronic Tension Control, Digital Display $1,050
SP-5 $2,150
Vertical Strapping, Mechanical Tension Control
SP-5SS Stainless Steel $3,150
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 85
TP-101 Fully Automatic Strapping Machine
27 Straps per minute. Automatic Arch Type Strapping machine with standard
arch size of 34” w x 24” H, cycle start with foot switch, push button or table top roller
switch. 9 or 12mm strap size 8 x 8 core
size, 220 volt.
$4,500*
TP101AP $7,850
Pneumatic Top Compression Cylinder to Compress Package
TP101SS $8,650
Automatic Arch Type, PLC Control, Stainless Steel
TP101PR $8,850
Fully Automatic Arch Type, Power Roller Table PLC Control, 3 Photo eyes
The TP-101-PR is a fully automatic strapping machine and is ideal for high speed automated packaging lines. The TP-101-PR strapping machine is suitable for many medium and heavy weight strapping applications. The system has powered table rollers. Strapping tension, power, temperature and storage are adjusted with outside controls for convenience.
TP-101 PR-Good for packages over 20 lbs.
TP101PB $8,950
Fully Automatic Arch Type, Power Belted Table, PLC Control, 3 Photo eyes with
timers allow strap position to be set on package.
TP-101 PB-Good for packages 20 lbs. or lighter
Model RETAIL
TP201 $7,750
Fully Automatic Side Arch, PLC Control, 2 Photo eyes
TP-201 SS $10,285
Arch Size
(Standard)Table Height Strap Width Strapping Speed
Max
TensionPower Supply Machine Dimensions Weight
W850mm
H600mm810mm 9,12,15mm 2 sec./Per Strap 80 kgs
220, 240, 380 V
50/60Hz 3PhaseW1600mm, D590mm, H1500mm 230kgs
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 86
TP301 $7,850
Fully Automatic Arch Type, PLC Control Low Table Height
TP301PB $9,925
Fully Automatic Arch Type, PLC Control, Power Belted, 3 Photo eyes
TP501 $8,450
Automatic Arch Type Thin Strap Capability 6mm
SS-502 $6,500 High speed 50-60 straps per minute, fully automatic, servo motor driven, PLC solid state control, CE standard. Will run 5, 6, 8, or 9 mm strap width (specify at time of order)
Standard Arch 25" W x 17" H
Optional Items
Automatic Threading Option
$595
Center belt for TP 101PB $595
Increase Arch Width every 8” $250
Increase Arch Height in 8” Increments, add
$200
PP-8026 $4,500
Pallet Strapping Machine, fast 1.5 seconds per strap, Instant Heating in 5
seconds machine is ready to operate, 110/220 volt power. Uses 6-15mm strap width
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 87
PALLET STRETCH WRAPPERS
PP-981HP PP-981LP (Includes Ramp) Model Description “Entry Level” RETAIL
PP-981 HP High Profile –No Ramp Mechanical Brake Stretch 100%, 3,000 lb capacity, Fixed speed turntable 10 RPM, 110 volt
$4,650*
PP-981HP-Scale Package Built in scale with 6 Load cells, LED weight indicator to 5,000lb
$7,750
PP-981 HP/SS Stainless Steel $Call
PP-981 LP Low Profile –Includes Ramp Mechanical Brake Stretch 100%, 3,000 capacity, 10 RPM, 110 volt.
$5,150*
PP-981 LP/SS Stainless Steel $Call
PP-982HP PP-982LP (Includes Ramp) Description “ Mid Range” RETAIL
PP-982 HP Electro Mechanical Brake Stretch Machines, up to 150% stretch. 4,000 lb capacity, Photo eye, 7” HMI Color touch screen, 12 program memory, 0-12 RPM Turntable, 110 Volt. LP Model includes ramp
$5,950*
PP-982 LP $6,550*
*Asterisk indicates item in stock
PP-981 Now with soft start turntable for unstable loads and photo eye included.
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 88
PALLET STRETCH WRAPPERS
PP-983HP PP-983LP (Includes Ramp) PP-1621AL Cut, Clamp & WipeDescription “High Quality” RETAIL
PP-983 HP High Profile-No Ramp – Powered Pre-Stretch @ 225%, 7” Color HMI touch screen, 4,000 lb capacity, photo eye, 1 HP motor, 0-12 RPM Turntable, 110 volt
$7,950*
PP-983HP/SS Stainless Steel $Call
PP-983 LP Low Profile - Includes Ramp , Powered Pre-Stretch @ 225%, 4,000 lb capacity, photo eye, 1 HP motor, 0-12 RPM, 110 volt
$8,450*
PP-983HP with Scale PP-983LP with Scale
Scale built into pallet wrapper frame using load cells, 5000 lb capacity, LED display
$10,950* $11,745*
PP-983LP/SS Stainless steel $Call
PP-1621AL Fully Automatic “Cut, Clamp and Wipe” Pallet Stretch Wrapper with PLC controller and powered pre-stretch at 300%, 59” diameter turntable that spins at 15 RPM, Max load weight of 4,400lbs, Std pallet wrap height 83”
$13,750*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 89
PALLET STRETCH WRAPPERS
PP-983 PJ PP-983 TP PP-983DT
(Pallet Jack Turntable) (Top Platen Hold Down) (Dual Turntable) *For Open base pallets only for light unstable loads
MODEL NO. DESCRIPTION RETAIL
PP-983-PJ (Pallet Jack Turntable)
Designed for open base pallets only
No ramp required
Load pallet with pallet jack-Great for printing industry
$8,625
PP-983HP-TP Top platen hold down for light unstable product $10,925
PP-983HP-DT (Dual Turntable)
Dual turntable for increased production speeds $12,075
PP-4512
Mobile Pallet Wrapper with built in Pallet Jack.
Production rate of up to 20-25 Loads /hr
Min/max Pallet dimensions: 48” L x 30-40” W
Maximum pallet height: 71”
Rotating Arm Speed of 1-12 RPM
120 volt power, will wrap 100 loads on full charge 8hrs
Top and bottom wrap counts with built in photo eye
Safety feature: If rotating arm inadvertently strikes an
object the arm will automatically stop
PLC Controlled
Mechanical brake stretch system used
$8,795
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 90
PALLET STRETCH WRAPPERS
PP-4510R Robot PP-59T Powered turntable PP-985LW Luggage Wrapper- Stretch Wrapper With footswitch and optional ramp Great for airport kiosk
MODEL NO. DESCRIPTION RETAIL
PP-4510R Robot Pallet Stretch Wrapper, 250% pre-stretch $11,750*
PP-59T Powered turntable with footswitch
Optional Ramp
$2,895*
$550*
PP-985LW Luggage Wrapper Single 20” head $6,500
PP-985LW Luggage Wrapper Dual head system-(1) 20” pre-stretch head and (1) 30” head
$8,500
PP-987 Mattress/Sofa wrapper
Furniture wrapper (turntable is 102” L x 59” W) $12,495
PP-201 Ring Wrapper PP-203 Roll Wrapper
MODEL NO. DESCRIPTION RETAIL
PP-201 Orbital Ring Wrapper
Ring Dia: 15.75” / Product Size: 7.8” W x 7.8” H
Rotation Speed of 50 RPM / Conveyor Speed: 5m (16ft/min) Std conveyor length 16”/220V
$17,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 91
MODEL NO. DESCRIPTION RETAIL
PP-203 Roll Wrapper Roll Wrapper is designed to wrap large cylindrical items. Pkg Size: 20”-59”L x 20”-63” W, 4,400 Max load weight, 0-15 PRM turntable speed for wrapping 20-40 loads per hour.
$19,750
PP-1223ARD Powered Roller Turntable PP-1224AHM Rotary Arm Wrapper
MODEL NO. DESCRIPTION RETAIL
PP-1223ARD Fully Automatic with Powered Roller Turntable. Features Cut, Clamp and Wipe, 78” Diameter Turntable, 90” pallet wrap height, 300% powered pre-stretch, Turntable speed 0-15 RPM, load weigh of 4,400 lbs, 220V 3 phase *Optional infeed or discharge conveyor lengths available.
*Powered conveyor sold separately
$31,950
PP-1224AHM Rotary Arm Pallet Stretch Wrapper. Features 300% powered pre-stretch, up to 14 RPM rotation speed, 80” wrap height, up to 40 loads per hour.
*Also available in a single column style mounting
$13,500
Optional Items RETAIL
5,000lb Capacity Turntable (PP-982 and PP-983 ONLY) Turntable support rollers increased
from 18 to 28 to support added weight and motor increased to 1 HP $1,325
Print out of weight data from scale $ 795
105” Wrap height $ 750
72” Diameter turntable $1,695
Base Extensions-24” $ 650
Extra Ramp-Standard ramp is 70” long $ 550
Extra Long Ramp (85”) $ 695
Extra Long Heavy Duty Ramp (85”) $ 995
Insta-Cut automatic film severance (PP-982 and PP-983 only) $ 695
Top platen hold down (PP-982 and PP-983 only) $2,550
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 92
TRAY SEALING EQUIPMENT
EASYTECH SEALTECH-1 SEALTECH-2
EASYTECH Manual Tray Sealer, pull film from the back to cover the tray, pull down the handle of the heated platen to seal the tray and release, the platen is spring loaded, Digital Temp Control #304 Stainless Steel Frame, will run CPET or APET trays Max tray size: 6.9” x 10” One set of tooling included 110 volt (Machine dims 17” L x 14” W x 10” H) Weight-45 lbs Additional tooling
$2,495
$ 225
EASYTECH-1 Same machine as described above with larger seal area Max tray size: 9.8” x 12.6” One set of tooling included Additional Tooling
$2,850 $ 295
SEALTECH Semi-Automatic Tray Sealer, as you push the tray carrier in, the film automatically moves over the top of the tray to be sealed, the machine will seal and cut the film using an electric driven motor. Digital temp control with adjustable seal timer, #304 Stainless Steel Frame, will run APET or CPET trays Max tray size: 6.9” x 10” One set of tooling included 110 volt, Machine Dims: 15” L x 13” W x 12” H, Weight-66 lbs Additional Tooling
$2,995
$ 325
SEALTECH-1 Same machine as described above with larger sealing area Max tray size: 12.6” x 10” One set of tooling included Additional Tooling
$3,750
$ 375 SEALTECH-2 Same machine as described above with larger sealing area
Max tray size: 14.1” x 10” One set of tooling included Additional Tooling
$4,550
$ 450
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 93
TRAY and MAP SEALING EQUIPMENT
PP-900 Series of Tray and MAP (Modified Atmosphere Packaging) Sealers
PP-900S1 Semi-Automatic Tray Sealer (Automatic or Manual mode) # 304 Stainless Steel Construction, In automatic mode once tray is placed into cavity a sensor signals machine to cycle, Die cuts around container for attractive look, 5 minute warm up time. Dims: 20”L x 14” W x 32” H, Weight:132 lbs Max tray size: 8.6” x 6.7” (450-500 pcs/hr) 1 Cavity Additional Tooling Gas Flush Model PP-900SF1 (Additional Tooling-$1,640)
$4,995
$1,350 $6,550
PP-900S2 Same machine as described above with 2 cavities Max tray size: 3.9” x 6.7” (800-1000 pcs/hr) Additional Tooling Gas Flush Model PP-900SF2 (Additional Tooling-$1,850)
$5,595
$1,550 $6,895
PP-900S4 Same machine as described above with 4 cavities Max tray size: 3.9” x 2.95” (1350-1500 pcs/hr) Additional Tooling Gas Flush Model PP-900SF4 (Additional Tooling-$2,150)
$6,250
$1,850 $7,450
PP-900L1 Same machine as described above with Larger Seal Area 1 cavity Max tray size: 12.6” x 9.8” (450-500 pcs/hr) Additional Tooling Gas Flush Model PP-900LF1 (Additional Tooling-$2,050)
$5,295
$1,550 $7,450
PP-900L2 Same machine as described above with 2 cavities Max tray size: 5.9” x 9.8” (750-800 pcs/hr) Additional Tooling Gas Flush Model PP-900LF2 (Additional Tooling-$2,350)
$5,750
$1,750 $7,795
PP-900L4 Same machine as described above with 4 cavities Max tray size: 5.9” x 4.3” (1250-1450 pcs/hr) Additional Tooling Gas Flush Model PP-900LF2 (Additional Tooling-$2,450)
$6,295
$1,950 $8,395
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 94
PP-900XL1 Same machine as described above with Larger Seal Area 1 cavity Max tray size: 13.8” x 10.2” (400-450 pcs/hr) Additional Tooling Gas Flush Model PP-900XLF1 (Additional Tooling-$2,250)
$6,550
$1,950 $8,575
PP-900XL2 Same machine as described above with 2 cavities Max tray size: 6.3” x 11” (700-800 pcs/hr) Additional Tooling Gas Flush Model PP-900XLF2 (Additional Tooling-$2,575)
$6,950
$2,150 $8,995
PP-900XL4 Same machine as described above with 4 cavities Max tray size: 6.3” x 4.7” (1150-1350 pcs/hr) Additional Tooling Gas Flush Model PP-900XLF4 (Additional Tooling-$2,875)
$7,450
$2,375 $9,850
PP-900XXL1 Same machine as described above with Larger Seal Area 1 cavity Max tray size: 16.5” x 11.4” (375-450 pcs/hr) Additional Tooling Gas Flush Model PP-900XXLF1 (Additional Tooling-$2,675)
$7,600
$2,150 $10,195
PP-900XXL2 Same machine as described above with 2 cavities Max tray size: 7.7” x 11.4” (650-750 pcs/hr) Additional Tooling Gas Flush Model PP-900XLF2 (Additional Tooling-$2,875)
$8,250
$2,375 $10,650
PP-900XXL4 Same machine as described above with 4 cavities Max tray size: 7.7” x 5.1” (1050-1350 pcs/hr) Additional Tooling Gas Flush Model PP-900XLF4 (Additional Tooling-$3,195)
$8,650
$2,575 $11,350
One Set of Tooling provided with each machine (Maximum tray depth for all machines is 4.7”)
Photo eye included for running print registered films / Optional date coder $1,195
Air Required: 60-80 PSI / 110 or 220 Volt Power
TS-800 Shown
Model No DESCRIPTION RETAIL
TS-800 Fully Automatic 8 station Rotary Tray or Cup Seal Machine with Stainless Steel frame construction. Will run PP, PS, PET or Paper. Features a 7” color touch screen HMI with Panasonic PLC, Rated at up to 20 cycles per minute. Max container dimensions 5.5” Diameter.
220 volt, 1 phase, 2kw / 5 cfm at 80 PSI.
$29,950
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 95
TRAY SEALING EQUIPMENT
SCS-320 TS-Pro Series Model 1808 TS-1600/2 Table Top Tray Sealer Shuttle Style In-line Tray Sealer Model Description RETAIL SCS-320 Table top tray sealing machine. Great for yogurt cups, juice,
fruits, meat, candy etc. Can use PP, PS, PET, Easy Peel Film, foil films. Single Cavity, 5.7” Color touch screenSeal area: 7” L x 5.5” w x 5.5”HSpeeds of 10 CPM, #304 Stainless Steel frame220v, 1 Phase, 5 amp
$5,495
SCS-400 Same machine as above with larger seal area:8.85”L x 6.8” W x 7” H, Single cavity tooling
$5,995
SCS-400-2 Same machine as described above with dual (2) tray cavities $6,500TS-Pro Shuttle style tray sealer using laminated films manufactured in
# 304 Stainless Steel construction. Seal area of 12.8”(325mm) x 10.3” (262mm) x 4” (102mm) Tray is manually loaded and unloaded from the front.Pneumatic driven top seal platen, Top seal mold with knife, tray placement mold with anvil, Cycle output of 4-6 PPM.Omron PLC with Omron 7” color touch screen.220 volt, 1 phase 60-80 PSI; Includes one set of toolingOptional hot stamp ribbon printer (THR35A) 35mm 2x3mm
$17,950
$1,600
Model 1908 Intermittent Motion sealing with speeds from 5-27 PPM, Adjustable sealing dwell and sealing platen force, Uses straight slit film, unprinted or random repeat printed, Constructed of Stainless Steel and anodized aluminum. 120 volt 6 amps.Tray size: 8.5” x 6.5” x 3.25” H3.5 or 7” film cut (OAL) 77” L x 23” W x 47” HAdditional set of tooling: $3,750
$20,500
Model 1808 Stainless Steel Frame Construction, Automatic Discharge, Rotary motion sealing at up to 35 PPM, Continuous motion ofthe conveyor, Removable tray carriers constructed of aluminum. 220 volt, 1 phase, 10 ampTray size: 8.5” x 10” x 3.25” H / (OAL) 83” L x 56” H x 27” WAdditional Tooling Set:
$26,750
$3,750
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 96
TS-1600/2 2 Lane In-line automatic tray sealing machine for 7” diameter containers using laminated films, Stack of containers are loaded manually into hopper and automatically dispensed, Sealing and cutting pneumatic operations controlled by Omron PLC and Omron 7” color touch screen, # of tray carriers-custom made. (10-20 cycles per minute) Speed dependent on tray size 20-40 PPM. Machine comes with one set of tooling molds. 220 Volt, 1 phase 3.5KW 60-80 PSI
TS-1600/3 (3 Lane model) 40-60 PPM TS-1600/4 (4 Lane model) 50-80 PPM
Optional: Hot stamp ribbon printer Additional set of tooling
$39,500
$42,500 $47,500
$2,950 $9,500
Tray and MAP Sealing Machines
Model RETAIL
VT-109 Will seal one #3 tray (7.7” x 5.7”) or 1-2 cups, Max film width 8.5”, Cycle speed of 10 cycles per minute, 110 volt, 10 amp. Table top, Auto /Semi-Automatic operation
$5,770
VT-300 Will seal one tray (12.2” x 11” x 3.5) 220 volt, semi-automatic $9,450
VT-400 Stainless Steel Construction, Semi-Automatic operation, Automatic film advance and cut system, Print film registration, Bush vacuum pump, Will run 1 tray (12.9” x 9.4” x3.5”) or 2 Trays (8.6” x 6.7” x 3.5”) deep, 2.5 cycles per minute, 230V, 3 phase, 30 amp, Max film width 15.7” (MAP Sealer)
$24,995
VT-570 Stainless Steel Construction, Semi-Automatic operation, Automatic film advance and cut system, Print film registration, Bush vacuum pump, Will run 1 tray (17.3” x 13.5” x3.5”) or 4 Trays 8.6” x 6.7” x 3.5”) deep, 2.5 cycles per minute, 230V, 3 phase, 30 amp, Max film width 18.1” (MAP Sealer)
$37,995
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 97
TURNTABLES / ACCUMULATORS
PP-36LS RSM-1200 PP-48AT PP-48UT Lazy Susan Turntable Stainless Turntable Accumulation Unscrambling
Turntable for Bottles Turntable
Model Description RETAIL
PP-36LS 36” Diameter turntable by 3” Deep lazy Susan product accumulator variable speed drive.
$1,395*
PP-36LS-SS Same unit described above in Stainless Steel $3,550*
PP-48LS 48” Diameter turntable by 3” Deep lazy Susan product accumulator variable speed drive.
$1,895*
PP-48LS-SS Same unit described above in Stainless Steel $3,895*
PP-60LS 60” Diameter turntable by 4” Deep Lazy Susan $2,395*
PP-60LS-SS Same unit as above in Stainless Steel $4,895*
RSM-1200 48” Diameter Lazy Susan accumulation turntable, Variable speed drive, #304 Stainless Steel Frame, 220 volt.
$4,650*
RSM-800A 32” Diameter Rotary Unscrambler and Accumulator, Stainless Steel Construction.
Machine Dimensions: 47” L x 32” W x 33.5” H Electrical: 220 volt, 1 phase
$4,895*
PP-36AT-SS 36” Diameter Accumulation turntable for bottles etc -Stainless Steel
$3,795*
PP-48AT-SS 48” Diameter Accumulation turntable for bottles etc -Stainless Steel
$4,495
PP-60AT-SS 60” Diameter Accumulation turntable for bottles etc -Stainless Steel
$5,495
PP-48UT-SS 48” Diameter Unscrambling turntable in Stainless Steel $4,695
PP-60UT-SS 60” Diameter Unscrambling turntable in Stainless Steel $5,650
LS= Lazy Susan AT= Accumulation turntable UT= Unscrambling turntable
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 98
TWIST TIE MACHINES
TWIST TIE MACHINE 3567
The most technologically advanced twist tie machine in the world Model #3567. This state-of-the-art machine does not utilize a reciprocating arm which eliminates jams. The unique straight line ribbon feed avoids the ribbon jam ups that are common with other twist tie machines on the market today. The Model #3567 is U.L. approved constructed of all metal components for long and reliable service life
has a 1/2in. tying capacity and uses only a 3in. piece of twist tie ribbon per closure which is a 25% savings in consumables compared to competitive machinery making the Model #3567 for economical to use. Capable of tying up to 50 bags per minute the superior design and compact size has made it perfect for all applications including: bakery, food, candy, and confectionary industrial wire harnessing and assembly. The Model #3567 works with paper/plastic (our style #03-2500) twist tie ribbon plastic/plastic (our style #01-1500) twist tie ribbon decorative twist tie ribbon (our style #20-4000) and our exclusive patented Polycore (our style #17-2000) non-metallic twist tie ribbons.
Length: 21 in., Width: 7 in., Height: 12 in., Weight: 16 lbs. Tying Capacity: 1/2 in. dia., Operating Speed: 50 per minute Power: 110 volt (220v available)
TWIST TIE MACHINE 3570
The model #3570 is the perfect twist tie machine for larger bags or for applications where variable tying diameters are necessary. Adjustable tying diameters from ¼ inch to 1 3/8 inch allows this machine to be used for a variety of products including bags, small coils, hanks, bundles, and on most products where a twist tie closure is desired. Manufactured with the finest components, this machine requires no tools
to make tying adjustments, has separate adjustments for tying diameter and ribbon length, and requires no operator training prior to use. The Model #3570 uses 5/32 inch wide twist tie ribbon including our exclusive Polycor, non-metallic twist tie ribbon.
Length: 24 in., Width: 6 in., Height: 11 in., Weight: 26 lbs. Tying Capacity: 1/4 in. - 1-3/8 in. adjustable, Operating Speed: 40 per minute Power: 110 volt (220v available)
Model RETAIL
3567 $1,695 3570 $3,925 1,500 ft spools of paper or plastic ribbon 27 gauge wire 5/32” 5 Spools
10 Spools 25 Spools
50 Spools
$17.75 $17.25 $17.00 $16.35
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 99
TYING MACHINES
Model RETAIL
BT-45 Tying Machine-Semi Automatic rotary tying machine used to bundle a wide variety of packages from laundry to manufacturing industries, garment and textiles. Maximum package size 16” x 17” with a 9” throat depth. Uses PE tying twine. Up to 40 cycles per minute (110 volt power) Machine Dim: 35” L x 31” W x 55” H (348 lbs)
$4,900
PE Twine-White Color (1,800 meters roll length) 5,760 ft (Packed 12 rolls per case) Case weight 24kg (53 lbs)
$14.95/roll
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 100
VACUUM CHAMBER MACHINES
Model RETAIL
TC-280F Chamber size 14” x 15” x3.7” deep Distance between seal bar 11.8”, Seal bar length 11.8”, 110 volt
$2,095
TC-350FLR Chamber size 41” L x 16.6” W x 4.7” deep, Seal bar length 33”
$5,895
TC-420F Chamber size 19.8 x 19.2 x 7”, Distance between seal bars 14.9”, seal bar length 17.7”
$3,595
TC-420LR Chamber size 19.8 x 19.2 x 7 $3,895
TC-520F Chamber size: 23.6 x 23.6 x 7, Distance between seal bars 19.8”, Seal bar length 21”
$4,895
TC-520LR Chamber size: 23.6 x 23.6 x 7 $5,595
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 101
VACUUM CHAMBER MACHINES
SC SERIES VACUUM CHAMBER PACKAGING MACHINES
Model RETAIL
SC-420LR Chamber size 19.8 x 19.2 x 7” $4,695
SC-520LR Chamber size 23.6 x 23.6 x 7” $5,595
SC-680LR Chamber size 35.5 x 26 x 7” $6,995
SC-800LR Chamber size 38” x 33.5” x 8” $9,995
DC SERIES VACUUM CHAMBER PACKAGING MACHINES
Model RETAIL
DC-530 Chamber size 30” x 23.6” x 7” $ 9,980
DC-640 Chamber size 32” x 29” x 8” $12,880
DC-650 Chamber size 32.2” x 35” x 8” $13,880
DC-800 Chamber size 38.5” x 31” x 8” $14,985
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 102
VACUUM SEALERS-Entry Level-Table Top
E2000V E2000G Model RETAIL
Vacuum Sealer, ¼” seal width, clean room compatible, LCD display, Retracting nozzle, no pinch jaw, foot switch, 110 volt, 5 cfm at 90 psi E 1500V 15” long seal E 2000V 20” long seal E 2500V 25” long seal E 3000V 30” long seal E 3500V 35” long seal
$2,025 $2,210* $2,725 $2,945 $3,300
E 1500G 15” long seal Vacuum sealer with gas purge E 2000G 20” long seal E 2500G 25” long seal E 3000G 30” long seal E 3500G 35” long seal
$2,420 $2,663 $3,185 $3,465 $3,645
E2000D E2000GSS T3500G Model RETAIL
E 2000D 20” Vacuum sealer with dual nozzle and gas purge, ¼” wide seal. E 2500D 25” long seal E 3000D 30” long seal E 3500D 35” long seal
$3,240* $3,760 $3,935 $4,235
T 1500G 15” Touch Screen Vacuum Sealer with gas purge, password protected 5 bag menu, multiple programs. T 2000G 20” long seal T 2500G 25” long seal T 3000G 30” long seal T 3500G 35” long seal
$3,840
$4,050 $4,578 $4,735 $5,040
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 103
VACUUM SEALERS-Medium Duty-Table Top
AVS AVN CAVS
Model RETAIL
AVS 20” Vacuum Sealer with foot pedal operation. $2,095*
AVN 20” Vacuum Sealer with gas purge 25” long seal 30” long seal 35” long seal 50” long seal
$2,630 $3,140 $3,350 $3,560 $7,350
CAVS 20” Vacuum sealer, fully self contained no air supply required. 30” long seal
$3,142 $3,670
CAVN AVC-20 Vacuum Chamber
Model RETAIL
CAVN 20” Vacuum sealer, fully self contained, gas purge CAVN 30” Vacuum sealer, fully self contained, gas purge
$3,670 $4,080
AVC-20” Chamber vacuum sealer, chamber size 22” x 22” x 4” $5,460
AVCG-20” Chamber vacuum sealer with gas flush $5,800 3/8” (10mm) Seal width-$250.00 *Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 104
VACUUM SEALERS-Heavy Duty-Table Top
V V-1600
This Value Vac 1600 is truly a machine that delivers both quality and performance at a price that says, “WOW.” If you are looking for a no frills, entry level, commercial vacuum sealer, look no more. If longer seal lengths or other options are required, then take a look at our other available models. 120 volt, Vacuum pressure 20Hg, Air Consumption 2.5 CFM
MPV-18
MPV-18 is the vacuum sealer that handles the toughest vacuum packaging problems as well as the tightest budgets. It is an easy to operate economical vacuum sealer. With a price lower than the least expensive fixed nozzle. The Mighty Mutt provides high performance utilizing variable solid state controls for seal, dwell and vacuum timing. All these coupled with the ease of use of a retractable machine. The Mighty Mutt’s lightweight design and all metal construction mean portability and durability. The user-friendly retractable snorkel makes this entry-level unit a real winner. Perfect for small to medium shops. 115 volt, Vacuum pressure 20 Hg, Air Consumption 7.8 CFM
The “Workhorse” tabletop vacuum sealing line made from high grade stainless steel and heavy-duty anodized aluminum, these units will provide years of superior service. Ideal for medium to high volume use, sealers in the Retractable Series can be easily customized to meet special requirements in such diverse applications as food, medical or clean room environments. Standard features include: upper and lower heat bars; graphical screen control; single-parted exhaust; and exclusive built-in safety seal bar. The Retractable Series is an unequaled product for both its quality and price.
Model RETAIL
VV-1600 15.5” Seal Length x ¼” wide seal $1,495
MPV-18 17.5” Seal length x ¼” wide seal $2,195
Workhorse GVS2100R 21” seal bar $5,495
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 105
VACUUM SEALERS-Heavy Duty
NZ SERIES NOZZLE TYPE VACUUM PACKAGING MACHINE
NZ-1500 shown GVS2100R with stand Model RETAIL
NZ-600 with 23” seal bar, Nozzle Vac/Gas Stainless Steel construction, Gas Flush, Bag holding clips, IP-56 electrical box, Busch vacuum pump
$13,615
NZ-1000 Same as above with 39” seal bar $15,895
NZ-1500 “ “ “ 59” $21,080
NZ-2000 “ “ “ 78” $28,455
NZ-2500 “ “ “ 98” $35,830
NZ-3000 “ “ “ 118” $48,370
GVS-2100R With Stand-21” seal bar $ 8,995
GVS-2600R With Stand 26” seal bar $ 9,550
GVS-3100R With Stand 31” seal bar $10,075
GVS-3600R With Stand 36” seal bar $10,600
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 106
STOCK VACUUM BAGS-HEAVY DUTY 3 Mill 3 Mill STD Barrier Nylon/Poly COEX 7 layer Vacuum Bags
3 Seal pouches with seal dimension of 3/8” Inner packed in 250 quantity bagged
Minimum order $125.00 (Mixed sizes ok) Size Part # Qty per
case
Carton
Weight
Qty
1-5/m C/1000
Qty
6-24/m
C/1000
Qty
25-100/m
Cost/1000 5 x 7 285-57 2000 14.2 $20.51 $19.70 $18.90/m 6 x 8 285-68 1000 10.3 $28.12 $27.00 $25.90 6 x 10 285-610 1000 12.5 $35.15 $33.70 $32.39 6 x 12 285-612 1000 15.6 $42.20 $40.54 $38.80 6 x 15 285-615 1000 19.2 $52.75 $50.65 $48.60 7 x 9 285-79 1000 13.5 $36.92 $35.46 $34.00 7 x 11 285-711 1000 18.3 $45.12 $43.39 $41.57 8 x 10 285-810 1000 16.4 $46.88 $45.03 $43.20 8 x 12 285-812 1000 19.8 $56.26 $54.05 $51.83 8 x 15 285-815 1000 25.3 $67.75 $61.00 $58.50 10 x 10 285-1010 1000 20.4 $56.45 $50.84 $48.76 10 x 12 285-1012 1000 24.1 $70.35 $67.55 $64.78 10 x 13 285-1013 1000 25.6 $76.20 $76.20 $70.18 10 x 15 285-1015 1000 31.0 $87.90 $84.40 $80.98 10 x 18 285-1018 500 18.3 $105.48 $101.32 $97.18/m $48.59 box 10 x 22 285-1022 500 23.1 $128.92 $123.85 $118.78/m $59.39 box 10 x 30 285-1030 500 31.3 $175.80 $168.88 $161.96/m $80.98 box 12 x 12 285-1212 1000 30.5 $84.38 $81.06 $77.74 12 x 14 285-1214 1000 34.1 $98.45 $94.57 $90.69 12 x 16 285-1216 500 19.5 $112.52 $108.08 $103.65/m $51.82 box 12 x 18 285-1218 500 23.1 $126.58 $121.60 $116.62/m $58.31 box 12 x 20 285-1220 500 25.5 $140.65 $135.11 $129.57/m $64.78 box 12 x 24 285-1224 500 29.8 $168.78 $162.13 $155.48/m $77.74 box 14 x 16 285-1416 500 23.4 $131.25 $126.10 $120.94/m $60.47 box 14 x 20 285-1420 500 28.7 $164.08 $157.63 $151.16/m $75.58 box 14 x 24 285-1424 500 36.9 $196.90 $189.16 $181.40/m $90.70 box 16 x 20 285-1620 500 33.3 $187.53 $180.15 $172.76/m $86.38 box 16 x 24 285-1624 500 42.1 $225.00 $216.18 $207.32/m $103.66 box 16 x 26 285-1626 250 21.3 $243.80 $234.20 $224.60/m $56.15 box 16 x 28 285-1628 250 25.4 $262.54 $252.20 $241.86/m $60.47 box 18 x 22 285-1822 250 21.1 $232.06 $222.94 $213.80/m $53.45 box 18 x 28 258-1828 250 26.0 $295.36 $283.74 $272.11/m $68.02 box 20 x 28 285-2028 250 30.0 $328.18 $315.27 $302.34/m $75.58 box 22 x 34 285-2234 250 37.9 $438.35 $421.09 $403.83/m $100.95 box 24 x 36 285-2436 250 45.4 $506.34 $486.40 $466.43/m $116.60 box
These bags are commercial grade and will not work on home vacuum systems
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 107
VERTICAL FFS MACHINES
Vertical Form Fill and Seal Bagger
Recommended for all types of products packed in pillow or gusseted pouch using laminate film or BOPP roll stock.
Machine can use “Auger filler” for powders, “Volumetric Cup Filler” for beans, rice etc or “Multi-
Head Weigh Scales” for cereals, chips, candy etc.
*PM-420 Shown with optional auger feeder and discharge conveyorModel Description RETAIL
PM-320 Vertical form fill and seal automatic bagging machine with 5.7” color touch screen for easy set-up and adjustment. Panasonic PLC controller, servo motor drive, photo eye for printed films, product counter. Speeds up to 50-55 cycles min Film width: 7.2-12.5” (185-320mm) Bag length: 2.75-11” (70-280mm) Bag width: 3.15 – 5.75 in. (80-150mm)
$27,500
PM-420 Same machine as described above with larger capacity. Speeds up to 50 cycles/min Film width: 7.6-16.5” (190-420mm) Bag length: 3-12” (70-310mm) Bag width: 3.35” -7.8” (85mm-200mm)
$29,500
PM-520 Same as above with larger capacity Speeds up to 45 cycles per minute Film width: 7.7”-20” (195-520mm) Bag length: 3-15.25” (70-390mm) Bag width: 3.35-9.5” (85-245mm)
$31,950
PM-620 Same as above with larger capacity. Speeds up to 35 cycles/ min Film width: 8.85-24” (225-620mm) Bag length: 3-19.5” (70-500mm) Bag width: 4-11.5” (100-295mm)
$36,500
Options: Stainless Steel Frame Construction Hot Stamp Printer (THR25A) Video Jet 6220 Thermal Transfer Printer (1.26”x1.34” print area) Gas Flush Device Hole Punch (Euro Slot or Round Hole) Additional Forming Collar Film Static Eliminator Bag Gusset Device Powder Dust Extractor
$3,995 $1,600 $5,795 $1,850 $2,195 $1,950 $3,450 $2,595 $4,250
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 108
Vertical FFS-Sachet Packs-3 or 4 Sided Seals for Powders
52-AG Vertical Sachet FFS
The Model 52-AG is a continuous cam-driven vertical form fill and seal for sachet packing of powder products for cosmetic, pharmaceutical, chemical, agriculture, and/or food industries in three or four-side seal bag. It can make a bag up to 90mm(3.5”) W x 140mm (5.5”) L. New servo power control auger for precise filling and turbine shuffle for flow boosting agitators.
Auger included in price
$18,750
52-GT Vertical Sachet FFS
The Model 52-GT is a continuous cam-driven vertical form fill and seal for sachet packing of instant coffee, drink mix, sugar, salt, seasoning, and free flow granular products in three or four-side seal bag. It can make a bag up to 90mm (3.5”) W x 140mm (5.5”) L.
Includes Volumetric Cup Filler in price
$17,495
R-95 The Model R-95 is an intermittent vertical form fill and seal, equipped with AG50-L auger filler for packing powder products for cosmetics, pharmaceuticals, chemical, agriculture, and/or food industries in lap seal or fin seal stick pack. It can make a bag up to 40mm (1.57”) W x 180mm (7”) L.
Auger included in price
$22,000
Options: Chaplet Device-Chained Bags together-Requires air Easy open tear notch Video Jet Model 1210 Small Character Ink Jet Printer (date code, lot number words etc) Video Jet 6320 Thermal transfer printer 1.26” x1.34” print area
Additional Tooling for Bag Width Hot Stamp Ribbon Coder (THR25A) Stainless Steel Construction Quarto roller bag advance for making 4 sided bags
$2,195 $1,695 $5,995
$8,495 $995 $1,600 $3,500
$1,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 109
Vertical FFS-For Liquids High speed liquid & paste Vertical Form-Fill-Seal machine suitable for various low to medium viscosity liquids and paste like edible oils, fruit jam, ketchup, vinegar, shampoo, lotion or shower gels.
Model Description RETAIL
PM-150L Vertical filling machine for liquid products, Servo motor film drive system. 5.7” touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, can use piston pump, magnetic pump, or rotary pump. Production speeds of 40-150 BPM Fill range: 1-100ML (up to 3.38 oz) Bag length: 1.57” (40mm) to 7.87” (200mm) Bag width: 1.57” (40mm) to 3.75 (95mm)
$34,450
PM-52LP Vertical Sachet FFS machine for liquid products. 5.7” touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, rotary valve type volumetric filler. 20 litre hopper Production speeds of 24-54 BPM Fill range: 1-44ML (up to 1.5 oz) Bag length: 1.57” (40mm) to 5.5” (140mm) Bag width: 1” (25mm) to 3.5” (90mm)
$17,500
PM-65LP Vertical Sachet FFS machine for liquid products, Servo motor film drive system. 7” touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, can use piston pump, magnetic pump, or rotary pump. Stainless Steel Construction Production speeds of 30-60 BPM Fill range: 1-88ML (up to 3.0 oz) Bag length: 2” (50mm) to 11” (280mm) Bag width: 1.57” (40mm) to 5.5” (140mm)
$36,500
Available Options Stainless Steel Construction Hopper agitator with frequency regulator Pneumatic stop valve on spout-No leaks Additional forming device Hot stamp ribbon coder-THR25A (typeset 2x3mm) (Includes ribbon alarm) Video Jet 6250 Thermal Transfer Printer (1.26” x 1.34”) print area. RP Series Rotary Transfer Pump for filling or transferring viscous and semi viscous liquids. (Mounted to stainless steel trolley with casters).
$3,500 $1,695 $ 750 $ 695 $1,600
$6,900
$5,895
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 110
Optional Accessories: Weigh Scales
Model Description RETAIL
PM-UW2
PM-UM8
2 Head ultimate multi-head weigh scale with 5.7” color touch screen, high accuracy analog-digital load cell output, stepper motor drive, level sensor by load cell, 20 program memory, advanced mode selection with auto diagnostics. Filling range: 10-2000g (0.35 oz-105oz/ 6.56lbs) Weight accuracy: 0.05-2.0g Weighing speed: 10-25 cycles/min Hopper capacity: 5000ml Bucket Capacity: 2000ml Power: 220 volt, 1 phase, 1kw UW 2 XL Head Linear weigh scale (500-10000g fill
range, speed 5-20, 1-10 g accuracy,15000ml bucket)
$10,995
$12,500
19,500
PM-UW4 4 Head ultimate multi-head weigher with 5.7” color touch screen, high accuracy analog-digital load cell output, stepper motor drive, level sensor by load cell, 20 program memory, advanced mode selection with auto diagnostics.
Filling range: 5-200g (0.18oz-7oz) Weight accuracy: 0.2-2g (.07oz) Weighing speed: 25-50 cycles/min Hopper capacity: 500ml Bucket Capacity: 500ml UW 4-L (20-2000g fill range) (10-50 cycle rate) 3000ml
bucket
$13,500
$15,950
PM-UW10 10 Head multi-head weigh scale with 8.4” color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body
Filling range: 10-800g (3.5oz-20oz) Weight accuracy: 0.5-2.0g (.017oz-.07oz) Weighing speed: 65 cycles/min Bucket capacity: 1600ml
UW-10D Fill range (1500g) (45PPM) UW-10D-XL Fill range (100-3000g) (50 PPM)
$21,500
$22,500 $23,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 111
PM-UW14 14 Head ultimate multi-head weigh scale with 10.4” color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body
Filling range: 10-800g (.35oz-28oz) Weight accuracy: 0.1-1.5g (.05oz) Weighing speed: up to 120 cycles/min Bucket capacity: 1600ml
UW-14D Fill range (2000g) (80ppm)
UW-14DXL Fill range (100-3000g) (up to 70 ppm)
$31,500
$32,500 $33,500PM-UW16 16 Head ultimate multi-head weigh scale with 10.4”
color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body
Filling range: 10-300g (.35oz-10.6oz) Weight accuracy: .01-1.5g (.035oz-.17oz) Weighing speed: up to 120 ppm Bucket capacity: 1600ml
$35,000
PM-UW20 20 Head ultimate multi-head weigh scale with 10.4” color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body
Filling range: 10-800g (.35-28oz) Weight accuracy: 0.1-1.5g (.035oz-.17oz) Weighing speed: up to 130 ppm Bucket capacity: 1600ml
$39,950
WR-32 Bowl Feeder with 320mm (12.5”) diameter bowl $4,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 112
Feeding Conveyors: “Z” Bucket Elevators ZET-183 Z-Bucket elevator will feed product into 10,14, 16 or 20 head
weigh scale, Stainless steel construction with food grade plastic bucket, Variable speed drive.
Single bucket conveyor with 80L product hopper-stainless steel
$15,950
$9,285
SLT-100 Bucket Conveyor with 4.8 litre hopper $9,295
Feeding Conveyors: Incline Conveyors INC-132 Incline Conveyor - stainless steel, intra-lux belt, variable
speed, vibration feeder with 60 litre hopper, conveyor capacity <5 CBM/Hr. Conveyor height 3.8m 220v
$12,500
Discharge Conveyors: INC-52 INC-52 Product exit conveyor-Stainless steel construction,
food grade plastic mesh white color belting, intralox. $3,495*
Working Platforms: For Vertical FFS machines PL-10 Platform for multi-head weigh scale,
Stairway and gangway on 4 sides for ease of maintenance, Constructed of mild steel with PVC coated paint.
$ 9,950
PL-5 Mini-Platform $5,995
PL-120
PL-120SS
Platform for single weigher-Powder coated carbon steel (4.75” x 4.75” tubing) 24” gangway on 4 sides Stainless Steel Construction
$4,475
$8,900
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 113
Auger Fillers:
AG-95S
AG-135S AG-165S
Auger filler The Model AG95-S is a Standalone auger filler for filling powder and granular products for cosmetics, pharmaceutical, chemical, agriculture, and/or food industries. It is equipped with a 7” color touch screen, self-feeding auger and range from 500 to 1000g. (16-36oz) or (6.6 Gallon Hopper) #304 Stainless Steel Construction 1-2800 grams (.35-98oz) (6.1 lbs) 13 gallon hopper 1-5000 grams
$15,950
$21,250 $29,650
AG-95L Auger screw Filler driven by servo motor (Designed to connect to vertical FFS machine)
The Model AG95-L is an auger filler to integrate with a form fill seal for filling powder and granular products for cosmetics, pharmaceutical, chemical, agriculture, and/or food industries. Range up to 1000 g. (36oz)
Fill range: 1-1000g Accuracy: + or – 0.3-1% Hopper Volume: 20L Auger Cycle: 1.2s Construction: # 304 Stainless Steel Electrical: 220 volt, 1 phase 60hz
$14,950
AG-135L AG-165L
1-2800g, 50 litre (13 gal) Hopper, 220 V, 1 phase 2.0kw
1-5000 grams $18,595 $27,185
Volumetric Fillers: To feed Vertical FFS machines
GT-115 Turntable Volumetric Filler - Step less telescoping volume adjustment, stainless steel contact parts, level sensor for re-fill alarm, variable speed. Accuracy +/- 2.5%
$7,500
G-420 Volumetric Filler –Best used with rice, nuts etc. $7,250
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 114
Screw Conveyors: To feed Vertical FFS machines
SW-88 Auger Screw conveyor feeds product to auger filler.
Conveyor Capacity: 35 Cubic ft (264 gal) or 1,250 lbs per hour Conveyor Height: 1700mm (67”) Hopper Capacity: 30 gallons (4 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz
$5,895
SW-118 Auger Screw conveyor feeds product to auger filler.
Conveyor Capacity: 105 cubic ft (785 Gal/hr) or 3,695 lbs per hour Conveyor Height: 1700mm (67”) Hopper Capacity: 60 Gallon (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz
$7,900
SW-125 Auger Screw conveyor feeds product to auger filler.
Conveyor Capacity: 141 cubic ft (1056 Gal/hr) or 5,025 lbs per hour Conveyor Height: 2400mm (95”) Hopper Capacity: 60 Gallon (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz
$9,850
SW-131 Auger Screw conveyor feeds product to auger filler.
Conveyor Capacity: 176 cubic ft (1300 Gal/hour) or 6,200 lbs/hour Conveyor Height: 2400mm (95”) Hopper Volume: 60 gallons (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz
$12,500
Additional Options:
Gusseted Bag Forming Device Triangle shaped finger push in on the side of the bag
prior to sealing to create the side gusset. $1,595
Hot Stamp Printer Model THR-35C 35mm high text (3 lines of type) Includes alarm. Air required
$2,100
Hopper Upgrade Upgrade to 120 liter hopper for increase capacity and
speed. $695
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 115
WEIGH SCALES
OP-W-L Portion Scale OP-915 Bench Scale OP-918 Pallet Jack Scale OP-916 Floor Scale
OPW-L Washdown Portion Bench Scale Features: Durability and Cleanliness in One Stylish Design Ideal for Food Processing andHarsh Environments
Multiple weighing units: lb, oz, kg, g Large Stainless Steel Platter Warranty: 1 Year
Product No. Capacity IP Rating Pan Size Height Material Weight Retail
OPW-L-SS6 6kg x 0.2(g)
IP 67 Washdown
16" x 11" 4"/100mm All Stainless Steel 31 lbs $449* OPW-L-SS15 15kg x 0.5(g) 16" x 11" 4"/100mm All Stainless Steel 31 lbs $495* OPW-L-SS30 30kg x 0.2(g) 16" x 11" 4"/100mm All Stainless Steel 31 lbs $525*
OPF-P Series Part Counting Balances Features: Vibrating Technology provides the highest level of counting accuracy PLU for storing sample weights so they can be easily retrieved 30,000 displayed resolutions 3 displays (Weight, Unit Weight, Count) Truly portable with both AC adapter and rechargeable battery that lasts 100 hrs High visibility back-lit liquid crystal display (LCD) Durable ABS housing and large anti-static stainless steel pan Warning for insufficient unit piece weight and sample size Optional RS-232c for bi-directional communication with a PC or a printer Multiple weighing units: g, kg, lb, oz
Model # OPF-P3 OPF-P6 OPF-P15 OPF-P30
Capacity 3kg 6kg 15kg 30kg
Readability 0.1g 0.2g 0.5g 1g
Dimension 13.5" x 13" x 4" / 34cm x 32cm x 9.5cm
Pan Size 13.3" x 9" / 34cm x 22cm
Power Input 100-240V AC adapter and Rechargeable battery (included)
Ambient Temp 5--40°C
Weight 3.7 kg (8 lbs)
Retail $295 $325 $350 $375
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 116
OPF-N Series Precision Balances Features: Large removable stainless steel weighing platform Parts counting, percent weighing, and dynamic weighing Comes with a 9V rechargeable battery Large high contract back-lit liquid crystal display (LCD) Splash proof keyboard and display Anti-static stainless steel weighing pan and glass windshield Automatic zero-tracking and full range tare Calibration with reference weights Optional RS-232c for bi-directional communication with a PC or a printer Multiple weighing units: g, kg, lb, oz
Model # OPF-N3 OPF-N7.5 OPF-N15 OPF-N30
Capacity 3kg 7.5kg 15kg 30kg
Readability 0.1g 0.2g 0.5g 1g
Repeatability ±0.1g ±0.2g ±0.5g ±1g
Linearity ±0.2g ±0.5g ±1g ±2g
Dimension 10.5" x 12.5" x 5.5" / 26cm x 32cm x 14cm
Pan Size 11" x 8.5" / 26cm x 22cm
Power 100V-240V AC adapter and rechargeable battery included
Ambient Temp 5--40℃
Weight 3.5 kg (8 lbs)
Retail $295 $325 $350 $375
OPH-P Series Precision Electronic Balance Scale Features: Extremely high precision balance Large and wide angle backlit LCD display Splash proof keyboard and display Standard RS-232C for bi-directional communication with a PC or connecting directly to a printer Draftshield for preventing the influence of convection and other factors Multiple weighing units: G, Ct, lb, Oz, Ozt Dwt Warranty: 3 years limited
Model # OPH-P103 OPH-P203 OPH-P303
Capacity 100g 200g 300g
Readability 0.001g
Repeatability ±0.002g
Linearity ±0.002g
Dimension 8" x 11" x 12" / 20x28x30cm
Pan Size Φ 3.25" / 82mm
Power Input 100V-240VAC (adapter included)
Output 6vDC-9vDC/600mA
Ambient Temp 5--40°C
Weight 2.7kgs (6 lbs)
Retail $550 $595 $650
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 117
OPK Series Compact Precision Balances / Kitchen Scale Features: Sturdy plastic construction with stainless steel pan Level bubble that makes it a high precision balance Quick and easy weighing in the lab or in the field Splash proof keyboard and display Multiple weighing units: G, Oz, CT
2 years limited warranty
Model # OPK-P250 OPK-P500 OPK-P2500 OPK-P5000 OPK-S250 OPK-S500 OPK-S2500 OPK-S5000
Pan Material Plastic Stainless Steel
Capacity 250g 500g 2500g 5000g 250g 500g 2500g 5000g
Readability 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g
Repeatability 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g
Linearity 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g
Dimension 9" x 16" x 1.6" (23 x 40 x 4cm)
Pan Size 7" x 7 (17.5 x 17.5cm 5.7" x 5.7" (14.5 x 14.5cm)
Input 100V adapter or 4 AA batteries (not included)
Power Output 6vDC-9vDC/600mA
Ambient Temp 5--40°C
Weight 0.4 kgs (1 lb)
Retail $60 $65 $70 $75 $75 $95 $105 $125
OP-915 Bench Scale Adjustable leveling Feet Durable structure w/over protection Stainless steel cover Warranty: 2 yrs on platform, 1 yr on electronicsRechargeable Battery
NN=Not legal for trade
Product No. Capacity IP Rating Pan Size Material Weight Retail
OP-915-1212-100 100lb x 0.02lb
Splashproof IP65
12" x 12" C.S. deck; S.S. cover 26lbs $395*
OP-915-1212-100-NN 100lb x 0.02lb 12" x 12" C.S. deck; S.S. cover 26lbs $450
OP-915-1616-300 300lb x 0.05lb 16" x 16" C.S. deck; S.S. cover 31lbs $495*
OP-915-1616-300-NN 300lb x 0.05lb 16" x 16" C.S. deck; S.S. cover 31lbs $450
OP-915S-1616-300 300lb x 0.05lb Washdown IP67 16" x 16" All Stainless Steel 41lbs $895*
OP-915-1620-400 400lb x 0.05lb
Splashproof IP65
16" x 20" C.S. deck; S.S. cover 38lbs $495* OP-915B-1824-500 500lb x 0.1lb 18" x 24" C.S. deck; S.S. cover 87lbs $550* OP-915B-1824-1000 1000lb x 0.2 lb 18" x 24" C.S. deck; S.S. cover 89lbs $595*
OP-915BW-1824-500 500lb x 0.1lb 18" x 24" C.S. deck; S.S. cover 90lbs $650*
OP-915BW-1824-1000 1000lb x 0.2 lb 18" x 24" C.S. deck; S.S. cover 92lbs $695*
OP-915-2424-500 500lb x 0.1lb 24" x 24" C.S. deck; S.S. cover 66lbs $625* OP-915-2424-500-NN 500lb x 0.1lb 24" x 24" C.S. deck; S.S. cover 66lbs $550*
OP-915-2424-1000 1000lb x 0.2 lb 24" x 24" C.S. deck; S.S. cover 84lbs $695*
OP-915S-2424-500 500lb x 0.1lb Washdown IP67 24" x 24" All Stainless Steel 66lbs $995
OP-915-BW-2432-1000 500lb x 0.2lb Splashproof IP65 24" x 32" Diamond Plate cover 146lbs $695
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 118
Roller Ball Scale
Model No. Capacity Pan Size Material NTEP Column H Shippng WT Cost
OP-915BT-1616-300 300lbx 0.05(lb) 16"x16" S.S. cover,
M.S. Platform Yes 16" 31 lbs $595
OP-915BT-2020-500 500lb x 0.1(lb) 20"x20" Yes 24" 41 lbs $680
OP-916 Floor Scale Optional Ramp Includes LED Readout Heavy Duty Ramp 4 x 4 $395 5 x 4 $425 NN=Not legal for trade Warranty: 2 yrs on platform, 1 yr on electronics
Product No. Capacity Platform Construction Weight Retail
OP-916-2x2-5 5,000 lb x 1 lb / 2500kg 2' x 2' x 3.5" (H) Welded Steel, tread plate 82 lbs $595
OP-916-2x2-5-NN 5,000 lb x 1 lb / 2500kg 2' x 2' x 3.5" (H) Welded Steel, tread plate 82 lbs $550
OP-916-3x3-5 5,000 lb x 1 lb / 2500kg 3' x 3' x 3.5" (H) Welded Steel, tread plate 194 lbs $795 *
OP-916-3x3-5-NN 5,000 lb x 1 lb / 2500kg 3' x 3' x 3.5" (H) Welded Steel, tread plate 194 lbs $750
OP-916-4x4-2 2k lb x 0.5 lb / 1000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $895*
OP-916-4x4-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $1,295*
OP-916-4x4-5-NN 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 250 lbs $1,195
OP-916S-4x4-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) All Stainless Steel, smooth top 270 lbs $1,895*
OP-916-4x4-10 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $1,395*
OP-916-4x4-10-NN 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 260 lbs $1,295
OP-916-4x4-10-PF 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 320 lbs $1,395
OP-916-4x5-5 5,000 lb x 1 lb / 2500kg 4' x 5' x 3.5" (H) Welded Steel, tread plate 340 lbs $1,395*
OP-916-4x5-10 10,000 lb x 2 lb / 5000kg 4' x 5' x 3.5" (H) Welded Steel, tread plate 340 lbs $1,495*
OP-916-5x5-5 5,000 lb x 1 lb / 2500kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 400 lbs $1,695*
OP-916-5x5-5-NN 5,000 lb x 1 lb / 2500kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 380 lbs $1,595
OP-916-5x5-10 10,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 420 lbs $1,795*
OP-916-5x5-10-NN 10,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 400 lbs $1,695
OP-916-5x5-10-PF 10,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 480 lbs $1,695
OP-916-4x6-10 10,000 lb x 2 lb / 5000kg 4' x 6' x 3.5" (H) Welded Steel, tread plate 380 lbs $1,595
OP-916-5x7-10 10,000 lb x 2 lb / 5000kg 5' x 7' x 3.5" (H) Welded Steel, tread plate 500 lbs $1,895
OP-916-5x7-20 20,000 lb x 5 lb / 10000kg 5' x 7' x 3.5" (H) Welded Steel, tread plate 620 lbs $1,995
OP-916-4x8-10 10,000 lb x 2 lb / 5000kg 4' x 8' x 3.5" (H) Welded Steel, tread plate 470 lbs $1,895
OP-916-7x7-20 20,000 lb x 5 lb / 10000kg 7' x 7' x 3.5" (H) Welded Steel, tread plate 900 lbs $2,200
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 119
OP-412T OP-412L
Product No. Type Dimension Retail
OP-412T Thermal Transfer 3” L x 2” W x 4H” $199
OP-412M Dot Matrix 7.5” L x 4.5” W x 3.5” H $275
OP-412L Label Printer-Label size 2.25” x 1” (800 labels /roll) 7.5" L x 4.5” W x 3.5” H $345
OP-917 Drum Scale (built-in ramps) Features: -Large checkered safety plate platform with integral ramps -Ultra low profile
-Live rails, weighing directly or placing a pallet across the rails
-4” long integral ramped end -Warranty: 2 yrs on platform, 1 yr on electronics
NTEP-Legal for Trade
Product No. Capacity Weighing Platform Additional Features Weight Retail
OP-917-PT-1000 1000 lb x 0.2(lb) 30"(L) x 32"(W) x1.5"(H) Handles and wheels for easy move 135 lbs $1,195
OP-917-PT-2000 2000 lb x 0.5(lb) 30"(L) x 32"(W) x1.5"(H) Handles and wheels for easy move 135 lbs $1,295
OP-917-HD-5000 5000lb x 1(lb) 52"(L) x 48"(W) x1.5"(H) Heavy duty, large platform size 305 lbs $1,495
OP-921 Drum Scale/Low Profile Scale with 2 Ramps Features: Ultra low profile with self-aligned two ramps Live side rails can weigh items that extend beyond the scale Warranty: 2 yrs on platform, 1 yr on electronics
Includes: NTEP LED Display with Rechargeable Battery Options: Stainless Steel Construction (call for pricing)
Product No. Capacity Weighing Platform D Shipping Weight Retail
OP-921-5000 5000 lbs 36" x 36" x 1.5"(H) 290 lbs $1,495
OP-918 Pallet Jack Scale Features: Unique and user-friendly design for you to work with Rechargeable battery lasts 72 hrs in operation Warranty: 2 years on platform, 1 yr on electronics LED display
Options: Built-in printer: add $195
Product No. Capacity Weighing Platform Fork Height Weight Retail
OP-918-3000 3000 lb x 1 (lb) 4' x 2.5' 3" 360 lbs $1,695*
OP-918-5000 5000 lb x 1 (lb) 4' x 2.5' 3" 360 lbs $1,895*
*Asterisk indicates item in stock
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 120
WEIGH FILL SCALES
S-4 S-4 shown with S-5 Bulk FillSB-20 continuous band sealer
Can be used with bags or rigid containers to pack dry bulk product from powders to parts, 3.5 cu ft supply hopper, readout from 1 gram to .001 lbs, up to 10 lb, One year warranty
MODEL DESCRIPTION RETAIL
S-4 All contact surfaces are stainless steel with powder coated chassis, self-adjusting bulk and dribble speed control, 600-800 fill/hr, 120 volt, 5 amp, .25 cfm
$7,500
PP-1120L Entry level Vertical continuous band sealer Right Feed , ½ HP motor, Dry Ink Coding, Sealing speed 0-315”/min, 8mm wide seal, 11.8” wide conveyor.
Stainless Steel Frame
$5,295
SB-20 Shown in picture above
High Speed / High Quality continuous band sealer with conveyor, left to right feed, sealing speeds of up to 780”/min
$15,550
SB-20 Option Bag Top Trimmer $1,765
S-5 Bulk filling for weights up to 75 lbs, on the fly self adjusting bulk and dribble speed, 300-400 fill/hour.
$6,500
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 121
WEIGH FILL SCALES
S-6 Cascading Scale S-7 Dual Scale SLT-100 Bucket Conveyor
MODEL DESCRIPTION RETAIL
S-6 The S-6 is designed to fill harder to run products like crackers, chips and other non-free flowing products. All contact surfaces are stainless steel with powder coated chassis. Cascading feed pan, 24” x 24” hopper (3.5cubic ft) controller range to 10 lbs, 600-800 fill/hr, 120 volt, 5 amp, Air is .25 cfm at 30 psi
$11,750
S-7 Dual lanes for twice the speed, 36” x 24” (5.1 cubic ft) supply hopper can reach twice the speed of a standard S-4 unit. (600-1200 fill/hour)
$14,250
SLT-100 Bucket Conveyor to feed the supply hopper of the weigh scale. 4.8 litre hopper
$9,250
Additional Options: Dribble Feed Gate Increases speed of machine $850
Fill Spouts Made to fit bag size. $195
240 volt Non-Standard voltage $195
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 122
X-Ray Inspection Equipment
Model C3 Safeline Model X-33
MODEL DESCRIPTION RETAIL
C3-1006 FDA Concept- 3 X-Ray system is specifically designed for the rapid
automatic inspection of small to medium sized packaged products up to 10” W x 6” H. Includes pusher rejecter
$62,475
C3-1408 FDA Concept- 3 X-Ray system is specifically designed for the rapid
automatic inspection of small to medium sized packaged products up to 14” W x 8” H. Includes pusher rejecter
$74,995
C4-1006 USDA Concept -4 X-Ray system is specifically designed for the rapid automatic inspection of small to medium sized packaged products up to
10” W x 6” H. where environmental conditions require high pressure
and hygienic sanitizing. Includes pusher rejecter
$81,350
C4-1608-USDA Concept -4 X-Ray system is specifically designed for the rapid
automatic inspection of small to medium sized packaged products up to
16” W x 8” H. where environmental conditions require high pressure and hygienic sanitizing. Includes pusher rejecter
$98,175
C5-0609-FDA Concept-5 X-Ray system is specifically designed for the rapid automatic
inspection of jars, bottles, and other tall product up to 9” tall x 6” diameter. Includes pusher rejecter.
$79,275
X-33 Mettler Toledo X-33 Series X-Ray machine is the most advanced X-Ray
machine on the market today with the ability to detect contaminants as small as 0.8mm at speeds up to 250 fpm all while using only 20watts
of power.
Call for Pricing
Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | Phone (909) 923-9292 Fax (909) 923-1313
www.excelpackagingequipment.com Page 123
Standard Dynamics, Inc,1800 Cliff Road East
Suite OneBurnsville, MN 55337
952-888-7332StandardDynamics.com