Extensive Range of Products Increase in Stocks Sizes ......Standard Components for Press Dies...

Volume 1

Standard Components for Press Dies

Standard Components for Press D

ies 2011 Volume 1

MISUMI World Network

International SupportMISUMI Corporation Press Die Components Team TEL: 81-3-3647-7114 FAX: 81-3-3647-7030

MISUMI USA, INC.

MISUMI UK LTD.

MISUMI EUROPA GmbH

MISUMI(THAILAND) CO., LTD.

MISUMI KOREA CORP.

MISUMI TAIWAN CORP.

SHANGHAI MISUMIPRECISION MACHNERY CO., LTD.

MISUMI E.A. HK LTD.

MISUMI SOUTH EAST ASIA PTE.LTD.

MISUMI MALAYSIA SDN. BHD.

TEL: 1-847-843-9105

TEL: 44-1784-465530

TEL: 49-0-700-9994-1670

TEL: 66-38-959-200

TEL: 82-2-551-3611

TEL: 886-2-2570-3766

TEL: 86-21-6391-7080

TEL: 852-2375-4550

TEL: 65-6733-7211

TEL: 603-7960-8499

FAX: 1-847-843-9107

FAX: 44-1784-466695

FAX: 49-0-700-9994-3600

FAX: 66-38-959-202

FAX: 82-551-4811

FAX: 886-2-2570-3767

FAX: 86-21-6391-7085

FAX: 852-2302-4589

FAX: 65-6733-0211

FAX: 603-7960-7499

MISUMI Corporation4-43, Toyo 2-chome, Koto-ku,Tokyo 135-8458 JapanTel: +81-3-3647-7111 Fax: +81-3-3647-6241http://jp.misumi-ec.com/

MISUMI USA, INC.1717 Penny Lane, Suite 200, Schaumburg,Illinois 60173 USATel: +1-847-843-9105 Fax: +1-847-843-9107http://us.misumi-ec.com/Customer Service: [email protected] Inquiries: [email protected]

MISUMI KOREA CORP.3804 World Trade Center 159-1,Samsung-dong, Kangnam-gu, Seoul,135-729, KoreaTel: +82-2-551-3611 Fax: +82-2-551-4811http://kr.misumi-ec.com/[email protected]

MISUMI EUROPA GmbHKatharina-Paulus-Strasse 6, 65824 Schwalbach,GermanyTel: +49-6196-7746-0 Fax: +49-6196-7746-360http://[email protected]. OfficeTel: +44-20-3051-4809Rappresentanza Italiana OfficeTel: +39-02-6203-2225

MISUMI E.A.HK LTD.香港三住有限公司3/F., Malaysia Building, 50 Gloucester Road,Wanchai, Hong KongTel: +852-8303-2781 Fax: +852-8303-2782

MISUMI (CHINA) PRECISIONMACHINERY TRADING CO., LTD.米思米 (中国) 精密机械貿易有限公司16th Floor, Jinling Hai Xin Bldg,No666 Fuzhou Rd., Shanghai 200001 P.R. ChinaTel: +86-21-6391-7080 Fax: +86-21-6391-7085Shanghai: http://cn.misumi-ec.com/Guangzhou: http://cn2.misumi-ec.com/[email protected] OfficeTel: +86-20-8527-1038 Fax: +86-20-8527-1686Tianjin OfficeTel: +86-22-2302-9228 Fax: +86-22-2302-9350Wuxi OfficeTel: +86-510-8521-7176, +86-510-8521-9793Fax: +86-510-8521-9651Shenzhen OfficeTel: +86-755-8287-2420 Fax: +86-755-8287-2096Ningbo OfficeTel: +86-574-8706-6835 Fax: +86-574-8706-6839

Gurgaon OfficeTel: +0124-424-1662Chennai OfficeTel: +91-20-6647-0000 Fax: +91-20-6647-0000

MISUMI INDIA Pvt. Ltd.3rd Floor, ONYX Building, North Main Road,Koregaon Park, Pune -411001 Maharashtra, IndiaTel: +91-20-6647-0000 Fax: +91-20-6647-0050http://[email protected]

MISUMI (THAILAND) CO., LTD.300/24 Moo 1, Eastern SeaboardIndustrial Estate Soi 5, Tambol Tasith,Amphur Pluakdaeng, Rayong Province 21140, ThailandTel: +66-38-959-200 Fax: +66-38-959-202http://[email protected]

MISUMI TAIWAN CORP.台灣三住股份有限公司9F-1,No.126, Nanjing East Road Sec.4,Taipei 10595 Taiwan R.O.C.Tel: +886-2-2570-3766 Fax: +886-2-2570-3767http://tw.misumi-ec.com/[email protected]

MISUMI SOUTH EAST ASIA PTE. LTD.331 North Bridge Road, #05-03, Odeon Towers,Singapore 188720Tel: +65-6733-7211 Fax: +65-6733-0211http://sg.misumi-ec.com/[email protected]

Representative Vietnam Office (Ho Chi Minh)Tel: +84-8-5-4499555 Fax: +84-8-5-4499559

MISUMI MALAYSIA SDN BHDUnit 1206, 12th Floor Menara Amcorp No.18, Jalan Persiaran Barat 46050 Petaling Jaya, Selangor, MalaysiaTel : +603-7960-8499 Fax : +603-7960-7499http://my.misumi-ec.com/[email protected]

Extensive Range of ProductsIncrease in Stocks Sizes & Varieties

SGP StockSGP Stock

ComponentsCODE: MSB MSW MS SRW T FGSM WSS HX HXH MGN etc. P.51, 81~94

PRESS DIES STANDARD COMPONENTSWIDE RANGE of TOP QUALITY

Additional 300 Stock Items Total 2400 Items in Stock now

Stripper Guide Pins & BushingsCODE: SGOH SGPH SGON SGPN VGPH VGHZ SGBH SGBL SGBT SGBA SGBF SGHZ SGBZ SGFZ SGHM SGBBF SGBBS etc. P.1~26

Guide PostsCODE: BRPM BSPK BSPM MRP MSP etc. P.39~42

Guide BushingsCODE: LBB RBB LBBS LDB LDBZ MBS etc. P.43~50

Holder Guide Post SetsCODE: MYP MY MYZ MYZP N-MYP N-MYZP MYA MYAP MYJ MYJP MYAK etc. P.55~64

Guide Posts SetsCODE: QM RM RD PD QBSH RMSH etc. P.31~38

Punches & Pilot PunchesCODE: SPAL SJAL SPAL-C SPC SHB SPB SPT etc. P.65~76

Button DiesCODE: EMHD EMSD P.77~80

Guide Lifters / Lifter Pin SetsCODE: GLH GLK GLP GLS LPS LPSH etc. P.95~98

RGRGRW T FGSGSMMGN etc. SGP StockSGP Stock

eM

e

tteM

e

etsMYZP N-MYP MYAP MYJ

etc. SGP StockSGP Stock

Delivery Shorten!

Visit www.my.misumi-ec.com (MISUMI MALAYSIA) or www.sg.misumi-ec.com (MISUMI SOUTH EAST ASIA)*Warehouse is located in Singapore.

Product information are also available on our website.

SpringsCODE: WY WR WF WL WT WM WH SWY SWU SWR SWS SWF SWL SWM SWH SWB SWG SGC P. 99~128

SGP StockSGP Stock

COMPONENTS

HIGHLIGHT

highlight page_last_press.ai 6/7/2011 1:24:10 PM

Standard Components for Press Dies Product Lineup

P.65~PUNCHES PUNCH GUIDE BUSHINGS

P.75~PILOT PUNCHES

P.77~BUTTON DIES BLOCK PUNCHES BLOCK DIES

PRECISION PUNCHES & DIES CARBIDE PUNCHES CARBIDE PILOT PUNCHES

CARBIDE BUTTON DIES CARBIDE BLOCK PUNCHES CARBIDE BLOCK DIES

RELATED COMPONENTS FOR MISFEED SENSORS PUNCHES & DIES FOR FORMING SPECIAL SHAPED PUNCHES & DIES

RETAINERS BALL-LOCK PUNCHES & DIES/RETAINERSP.81~

COMPONENTS

P.1~STRIPPER GUIDE PINS & BUSHINGS

P.95~GUIDE LIFTERS

P.27~GUIDE POSTS & BUSHINGS FOR DIE SET

GUIDING COMPONENTS FOR AUTOMOBILE DIE COMPONENTS FOR AUTOMOBILE DIEP.53~

HOLDER GUIDE POST SETS

COMPONENTS FOR TRANSFER DIELOCATING COMPONENTS FOR AUTOMOBILE DIE OIL-FREE SLIDE PLATES

P.99~COIL SPRINGSCOMPONENTS OF CAMS GAS SPRINGS

COMPONENTS FOR LIFTING/DIE STORINGURETHANE SPRINGS FINISHED PLATES·FINISHED BLOCKS

JIGS & FIXTURES SERIES FOR INSPECTION

Cover 2_page 00 Press.ai 6/3/2011 6:38:39 PM

How to Start Business with MiSUMi

How to Order

For New Customers

Fill out the Customer Registration Form and send it to the Customer Service Department either by fax or e-mail. You

will receive your customer code once the registration procedure is completed.

For Existing Customers

1. Send in your inquiry with the details of your order (Misumi part no. & Quantity) together with your company details

to our Customer Service by fax or e-mail.

2. Our Customer Service will send you the quotation.

3. After confirmation of the price and delivery date, please send in the Official PO.

*For customers without credit terms, payment is to be made after PO confirmation.

Time of delivery stipulated in catalog might delay in case of stock shortage and/or required

Order received after 3pm will be treated as next working day order.

Warehouse is located at Tuas, Singapore.

Delivery

Singapore Malaysia Other Countries Destination

Non-stock Delivery as shownon each page

Stock 1 day + 2 days

Depends on yourcourier service

Changing or Canceling Orders

Changing or canceling orders (the Cancellation) is treated according to the shipment date and the timing when you make the cancellation. Cancellation charges will be imposed in some cases. Pleasecontact our subsidiary in your country for details.

•Items with logo

No cancellation is accepted.

•Items with 4 logo or logo shows longer days

Please refer to the table of the cancellation and shipment date below. Cancellation is acceptable with or without charges

(40% of product cost) depending on the timing of the cancellation.

Please contact our subsidiary in your country for details.

About Express Delivery ServicesThis system shortens the production time so that your order can be shipped out faster.

•To meet your urgent orders, we offer expedited services for many products. Our Express Delivery Services are available for the products marked with one of the symbols below. Depending on the specifi cations / dimensions of a product, the services may not be available. Before placing an order, please confi rm the service availability indicated on the product pages.

Special Emergency Service [Express T]

•[Express T] is a special emergency service that allows orders to be shipped out after 2business days of your order.

•Please note that this service might not be available depending on the order volume.

Reception Time of Emergency Service System [Express]

•Request for Express Services must be received before the following dead line. From 9:00 a.m. to 10:00 a.m. fo [Express T], by 3:00 p.m. for [Express A] and by 5:00 p.m. for [Express B and C]. Please note that orders placed after the above timings will be treated as next day orders.

Express T Express A Express B Express C

Emergency System

Orders Received By 10:00 a.m. By 3:00 p.m. By 5:00 p.m.

Shipped Out After 2 Business Days of Your Order After 3 Business Days of Your Order After 5 Business Days of Your Order After 7 Business Days of Your Order

Express T Express A Express B Express C

12

6

9 3

10AM

PM9

8

6

3

12

PM

12

3

6

9

5

•[Express T] orders must be placed by 10:00 a.m. Please use [Express A] (After 3 Business days of your order) after 10:00 a.m.

• Changes or cancellation after ordering of [Express T] will not be accepted. Changes or cancellation of Express A, B and C varies depending on the time.

•"Shipped out", "Shipment" denotes the required actual business days before the product is shipped.

• Please note that the actual delivery may vary depending on your location. Please consult your local Misumi offi ce for expected arrival dates.

•Table of Cancellation and Shipment date

: Cancellation without charge. : 40% of product cost is imposed on the

cancellation.

: No cancellation is accepted.

Catalogue DeliverySchedule and

ServiceDays from the Day of Ordering

Day of Ordering

1 Days Later

2 Days Later

3 Days Later

5 Days Later

6 Days Later

7 Days Later

8 Days Later

4 Days Later

17 Days Later

13 Days Later

14 Days Later

15 Days Later

16 Days Later

12 Days Later

11 Days Later

10 Days Later

9 Days Later

21 Days Later

20 Days Later

22 Days Later

5 DaysCatalog Item

7 DaysCatalog Item Express CExpress BExpress A

12 DaysCatalog Item

9 DaysCatalog Item

8 DaysCatalog Item

14 DaysCatalog Item

18 DaysCatalog Item

22 DaysCatalog Item

6 DaysCatalog Item

Shipment Date

Shipment Date

Shipment Date

18 Days Later

19 Days Later

3 DaysCatalog Item

Shipment Date

4 DaysCatalog Item

Shipment Date

16 DaysCatalog Item Express T

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

+ 2 days

iii

Returning and Replacing Goods•Item with logo can be returned. Administration charges applicable and customer is kindly request to contact our customer service prior making the return. Please note that the delivery cost of returning goods to the destination we determined must be paid by the customer.•Items with logo or logo shows longer days, cannot be returned as they have been manufactured-to-order.•When the received goods differ from the placed order, please contact our subsidiary for the replacement.

Please note that the above returning and replacing of goods are subjected to terms and conditions.

Please note that above delivery days are subject to change depending on the order volume.

Express Delivery Fee

Kindly contact our customer service for the express delivery charges for your country.

The above conditions only applicable to Singapore area. Please contact our subsidiary in your country for details.

Please note that some of the Punch & Die products are not available for cancellation depending on the manufacturer condition.

Please contact customer service for more information.

how to start business with misumi_press.ai 6/3/2011 6:30:57 PM

SPAS-C 25

Catalog No. (BCCHCCTCEetc.)

BC30LC95 P18.05

R¯0.5

B+0.3

L+0.3

H-

0.2

max35

R10

D-0.01-0.03

SP

(min3)

162025323845

SPAS-CSPAL-C

SPiS-CSPiL-C

SPiX-C

-

10~32FD

FD 10~32

FD 38C45 P.i

Code

BC

SC

WWC

PPC

PPC

0.16

P.i

P.i-C

6M

1(1

5 +0.03+0.01

13

D

1013

TypeCatalog No.

Type

˘6)

+0.0

2+

0.0

4

L(LC) P(PC) W(WC) R

WCPC

Alterations Price

r

0

0

0

¡

¡

¡

rr

S

L

SPAX-C

BC

B

GL

DB H

1013162025323845101316202532

101316202532

3845

50505050(50)

60 70 80 90 100

110 120110 120110 120110 120110 120110 120 130 140 150

130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150

5050

(40)(40)(40)(40)(40)(40)(40)

(50)(50)

60 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 100

110 120110 120

110 120110 120110 120110 120110 120110 120

110 120

3.00~ 9.996.00~12.99

10.00~15.9913.00~19.9918.00~24.9920.00~31.9928.00~37.9935.00~44.99

35.00~44.996.00~ 9.996.00~12.99

10.00~15.9913.00~19.9918.00~24.9920.00~31.99

28.00~37.9920.00~31.9918.00~24.9913.00~19.9910.00~15.99

6.00~12.993.00~ 9.99

9.9712.9715.9719.9724.9731.9737.9744.97

2.503.004.005.006.007.008.009.00

9.9712.9715.97

9.008.007.006.005.004.003.002.50

44.975.009.975.0012.97

37.9731.9724.9719.97

1316

19

23

28

35

41

48

48

41

35

28

23

19

1613

35

28

23

19

1613

13

19

19

25

30

40--

PCWmin.PCKmax.min. P max. R

SPAS-CSPDS-CSPRS-CSPES-CSPGS-C

SPGL-CSPEL-CSPRL-CSPDL-CSPAL-C

Catalog No.

TypeL

120110100120110100120110100120110100120110100120110100120110100

90807090807090809080908090809080

70

60

50(40)

38 41

45 48130 140 150130 140 150

90809080

28.00~37.9912011010035.00~44.99120110100

S

L

D

K

PÚ

0.0

1

WÚ0.01 R¯0.2

PÚ

0.0

1

WÚ0.01

PÚ

0.0

1

WÚ0.01 R

K=

0.010

2D

R¯0.2 Ú0.01WK

Ú0

.01

P

+0.0

1

P

P 2+W 2K=2W

P>WP>WP˘W

0.15¯R<P˘W

m5

(P-2R) +(W-2R)2 +2R2

F0.01 A

0.01/12

0.02 A

A

0

1.6

G

SPAS-C 25

Catalog No.

P18.05100

L P W

X

SPAX-CSPDX-CSPRX-CSPEX-CSPGX-C

X

5

5

5G

RE

DA GR ED

GR ED

A

A

GR EDA

A

GR REDA

PKCWP.

PRC

PCC

GC

PRC Ú0.05

PCC Ú0.05

LCLCL

B

fGC

L

LKC

LKZL

KC

WKC

270B

0B 180B

90B

Code U L

UC40

UC50

37

47

L˘80

L˘90

USN40

USN50

HC

TC

NKC

SRC

NDC

Code

H HC

-0.03D -0.01

Alterations

UC

r

T

TC

UL

D-1

D

GR EDA

TPC

KFC270B

0B 180B

90B

270B

0B 180B

90B

TCC

TCC

GR ED

h

P(PC) B

1.500~1.999

2.000~3.999

4.000~5.999

6.000~

20

35

45

60

max

3025191381.25~1.49

1.50~1.992.00~3.493.50~4.995.00~

P(PC)CW(WC) B max

A D R GE

1F 2F 3F 4F 5F 6F 7F

B

A

AT

AT

PC˘ P2

min ˘PCWC 2

PCWmin

Blade length X:Not applicable

When used with SC, tip and edge are rounded.

P PCWÚ0.01 +0.010

+0.0050

+0.010 e e

+0.05+0.30L 0e

+0.01+0.30L 0e

D>25:Not available

1B increments

Adds 1 key flat at 0Band the other on another angle.

1B increments

Adds 1 key flat at 0Band the other on another angle.

D¯HC<H

0.1mm increments0.5¯TCC (̄H-D)/2

SRC:Not applicable

Adds Chamfering to head.Strengthen the punch head.

˘3 =0r re

D38C45:Not applicable

m5D60~63HRC

MS6-25

For area out of Singapore please refer to P.i.



Price

Freeof

Charge

Freeof

Charge

7069

PUNCHES WITH DOWEL-FINISHED FOR RETAINERS-

DShank dia.

Shape Blade length With dowel

Blade length(B)X>L>S

R=0:Applicable

0.01mm increments

W 2R

0.15

¯R<

(

on

ly)

L(40), D10~25UB=8, When L(40)and D(10~25), the blade length is fixed to 8 mm.

L(50)UB=13, When L(50), the blade length is fixed to 13mm.

L(40), D32~45UB=6, When L(40)and D(32~45), the blade length is fixed to 6 mm.

PCK>D-0.05Ur=0, When PCK>D-0.05 shaped punch, D (press-in lead)is not available.:

:P>D-0.03Ur=0, When P>D-0.03 round punch, D (press-in lead)is not available.-0.03-0.01

-0.03-0.01GR ED

A

Order

ExampleIPunch with dowel is,

Mainly used for dies of body of automobile with retainer which hold punch. Different from indirect positioning by retainer's dowel hole, it allows direct positioning by the dowel hole coaxially machined to punch, and improves the die precision. It is effective when used for die machining by NC process. It can also be used for dies of exterior panels of electrical appliances by setting with retainer or for attaching to punch plate of progressive die.

R( only)R

Shear anglealteration

Delivery

Alteration

Days

Days

Days Express

Express

Express

Express

Express

Head

Head

Shan

k

Tip

Full

leng

th

2¯BC¯Bmax2¯BC¯Bmax

Changes blade length B.

Full L(LC)

requires BC+30mm or more.

0.1mm increments

0.01mm increments

Changes dimension P.

(Combination with

PKCU0.001mm increments)

0.01mm increments

Changes dimension PCW.

0.1mm increments

Full L(LC)

requires BC+25mm or more.

Changes blade length B.

Finishes blade with lapping.

Dimension P tolerance and the specification unit remain the same.

shape is not applicable with a corner radius of 0.D

0.3¯PRC¯10.1mm increments

PRC (̄P-0.2)/2PCCCGC:Not applicable

0.3¯PCC¯10.1mm increments

20B̄ GC<90B1B increments

Blade length B˘f+2f=P/2Mtan(90B-GCB)

PCC (̄P-0.2)/2PRCCGC:Not applicable

LKCCLKZCPRCCPCC:Not applicable

Adds Radius to blade tip.

Adds Chamfering to blade tip.

Adds single key

flat at head.

Adds double key

flats in parallel.To change angle, add KC.

Adds double key

flats in parallel.

Changes the position of key flat.

1Bincr.

(P:0.001mm incr.)

Changes tolerance on P. Changes tolerance on P(W).

Changes full

length tolerance.

Changes full

length tolerance.

30+B(BC)̄ LC<L25+B(BC)̄ LC<L

(Combination with LKCCLKZU0.01mm increments)

0.1mm increments

When LC-B(BC)is

30mm or less, B(BC)is LC-30mm.

0.1mm increments

When LC-B(or BC)is

25mm or less, B(or BC)is LC-25mm.

Changes full length. Changes full length.

No key flat.Punch & retainer set

not available.

KCCWKC:Not applicable KCCWKC:Not applicable

0.1mm incrementsChanges head thickness 2¯TC<5

When LC is combined, L=LC.

0.1mm increments

L is shortened by(5-TC).

Changes head diameter.

Punch & retainer set not applicable.

Punch & retainer set not available.

Modifies head to fit to select retainers(SLS).


D10~32:Applicable

Modifies shank to fit to urethane stripper(USN).

PCKmax.=D-1.1 Applicable to L˘80, L˘90

D10~32:Applicable

No press-in lead


Applicable USN

Replaces dowel pin.Attached MS6-25 to MSTP6-25

(tapped type).

15%

100~20010~29 30~99

5% 10%

1~9Quantity-Rate

IVolume discount rate

I SKD 11 or equivalent

With dowelDowel pin

SKD 11 or equivalent

Shape Shape Shape ShapeShape

shapeSelect tip shape from A~G shown below.

The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.

HOW TO USE CATALOG

KSelect blue characters one by

one from the left to find order

symbols.

KOrder example

KDimensions unnecessary to specify

for order symbols are covered

with blue mesh.

KPrinted in red means Stock

Dimension Table

Product Name

Catalog No.

Materials and others

Photograph

Drawing

Page number

How to Order

KSelect alterations

with code.

Alteration

Days to ship

KPrices are to be quoted.

KVolume discount rates are available

for most products.

Price

Use the Contents page to find the products by

product name and page number.

How to find the product

¡

Volume discount is also

applicable to alteration fees.

CAD data

Two-dimensional CAD data(in DXF and

IGES formats)is available for some

products in this catalog. Download the

files from the MISUMI's website.

MISUMI SOUTH EAST ASIA

http://sg.misumi-ec.com/contents/cad/

MISUMI MALAYSIA

http://my.misumi-ec.com/contents/cad/

iviii

MSWZ

B

MSWA

L

MPM

B

MSW

L

MPMMSWS MSWAS MSWZS

t

H

B

L1.5

MPM

C

t

45B

30B

About the JIS notation

Fe3O4(Black oxide)(JIS B 0207/Grade 2)(JIS B 0207/Grade 2)(JIS B 0207/Grade 2)

Fe3O4(Black oxide)

(Washer type)

S45C33~38HRCFe3O4(Black oxide)

(Break through type)

34~43HRCS45C

MSW SCM435(M2.5~10)S45C(M12~45)

MSWS S45C34~43HRC

(Break through, short type) (Washer, short type)(Short type)

KIn the case that JIS standards are indicated on certain location of the product page, please note that this is only

for product reference and is not an indication that the product is conforming to the JIS standards

KThe number of days(business days following

the day of your order)required before shipping

from MISUMI's distribution center in Singapore.

KExpress delivery services P.i

P.i

12 Days 14 Days

10 Days8 Days

18 Days

5 Days 7 Days

Days3

BExpress Express C

Express ATExpress

iii-iv.ai 6/7/2011 1:14:36 PM

How to start business with Misumi ................................................................................................................... i

How to use catalog ....................................................................................................................................... iii

STRIPPER GUIDE PINS & BUSHINGS (PRODUCT DATA) ................................................................. 1

GUIDE FOR STRIPPER GUIDE PINS & BUSHINGS ................................................................................ 3

STRIPPER GUIDE PINS............................................................................................................................. 5

HIGH RIGIDITY STRIPPER GUIDE PINS ............................................................................................... 9

FIXED-TYPE STOPPERS FOR BALL BEARING GUIDES/CLAMPS FOR

STRIPPER GUIDE PIN ........................................................................................................................ 10

STRIPPER GUIDE BUSHINGS ......................................................................................................... 11

BALL BEARING CAGES/SPRINGS FOR BALL CAGE ...................................................................... 16

GUIDE FOR 3 mRANGE STRIPPER GUIDE PINS/BUSHINGS ....................................................... 17

3 mRANGE STRIPPER GUIDE PINS ............................................................................................... 18

3 mRANGE STRIPPER GUIDE BUSHINGS ..................................................................................... 19

GUIDE FOR HIGH PRECISION STRIPPER GUIDE PINS & BUSHINGS............................................. 21

HIGH PRECISION CARBIDE STRIPPER GUIDE PINS ...................................................................... 22

HIGH PRECISION STRIPPER GUIDE PINS ..................................................................................... 23

HIGH PRECISION STRIPPER GUIDE BUSHINGS ........................................................................... 25

GUIDE FOR GUIDE POST SETS FOR DIE SET ................................................................................ 27

BALL BEARING GUIDE POST SETS FOR DIE SET ........................................................................... 31

PLAIN GUIDE POST SETS FOR DIE SET .......................................................................................... 35

GUIDE POSTS FOR DIE SET .............................................................................................................. 39

BALL BEARING GUIDE BUSHINGS .................................................................................................... 43

BALL BEARING CAGES FOR GUIDE BUSHING ................................................................................ 46

STOPPERS/SPRINGS FOR BALL BEARING GUIDE........................................................................... 47

ANTI-RISE RINGS FOR BALL CAGE.................................................................................................... 48

PLAIN GUIDE BUSHINGS FOR DIE SET .......................................................................................... 49

ADHESIVE CEMENT ............................................................................................................................. 51

GUIDE FOR HOLDER GUIDE POST SETS.......................................................................................... 53

PLAIN GUIDE POST SETS ................................................................................................................... 55

INTEGRATED TYPE PLAIN GUIDE POST SETS ................................................................................ 57

BALL BEARING GUIDE POST SETS.................................................................................................... 59

GUIDE POSTS/GUIDE HOLDERS/GUIDE BUSHINGS ...................................................................... 63

SHOULDER PUNCHES ........................................................................................................................ 65

JECTOR PUNCHES ............................................................................................................................. 67

PUNCHES WITH DOWEL ................................................................................................................... 69

STRAIGHT PUNCHES ........................................................................................................................ 71

PUNCH BLANKS .................................................................................................................................. 73

STRAIGHT PILOT PUNCHES .............................................................................................................. 75

BUTTON DIES ....................................................................................................................................... 77

DOWEL PINS ....................................................................................................................................... 81

DOWEL PINS/SPRING PLUGS FOR DOWEL PINS ........................................................................... 83

STEPPED DOWEL PINS/DOWEL PIN EXTRACTOR........................................................................... 84

HEXAGON SOCKET HEAD CAP SCREWS/SPRING WASHERS ....................................................... 85

LOW HEAD CAP SCREWS/EXTRA LOW HEAD CAP SCREWS ....................................................... 87

SCREW PLUGS .................................................................................................................................. 88

STRIPPER BOLTS ............................................................................................................................. 89

SHIM TAPES ....................................................................................................................................... 90

WASHERS/SPACERS ........................................................................................................................ 91

MAGNETS ............................................................................................................................................ 93

GUIDE LIFTER SETS ........................................................................................................................ 95

LIFTER PIN SETS/LIFTER PINS ......................................................................................................... 97

GUIDE FOR COIL SPRINGS .............................................................................................................. 99

(TECHNICAL DATA) INSTRUCTIONS AND NOTES FOR COIL SPRINGS ........................................ 101

WIRE SPRINGS .................................................................................................................................. 102

COIL SPRINGS .................................................................................................................................. 109

SPRING GUIDE RETAINERS .............................................................................................................. 127

LOAD-DEFLECTION DIAGRAM FOR COIL SPRINGS ...................................................................... 128

Tooling Map............................................................................................................................................ 129

Registration Form .................................................................................................................................. 134

: Additional sizes/New stock items : Existing stock itemsm Existinms :Contents

21

Catalog No.

(SGBD) (SGBA) (SGBH) (SGBB)

2O~12O 2O~12O

- -

- -

- -

- - -

-

-

-

SGBL25-20

VGBL25-20

SGBH25-20 -0.004~0.008

0.014~0.060

0.003~0.006

(kgf)

4,463kgf

3,382kgf

420kgf

(kgf/mm2)

228kgf/mm2

198kgf/mm2

21kgf/mm2

0

20

40

60

80

100

5 10 15 20 25 30

VSGCZ

VGBM

23.19M10

6.21M10

3.95M10

-4

-4

-4

10O~20O

2O~17O

3O~8O

8O~10O

5O~15O

2O~14O

S50C

-10O~-20O0O~-10O

2O~ 6O1O~33O

3O~35O 6O~ 8O

-2O~-16O

VSGCZ20-25

VGBM20-25

K

5

SGPHSTOCK STOCK STOCK STOCK STOCK

STOCK STOCK

SGOH

5 6

SGPN SGON

65 A

7

SGPR SGOR

8

SGPW

7

5 5

9 9

SGPWS SGPWH SGBD SGBA SGBH SGBL SGBT

11 12

SGSF SGBF

12

SGBZ SGHZ

13

SGCZ SGFZ SGBM SGHM

13

5 A

10

SSTK5 A

10

FCLP

5 T A

16

BSWPSGBBW SGBBS SGBBH

15

MBSH MBJH

16

SGBB SGBBL SGBBF

14

18

TGPR5 A

18

TGPH TGPN WVGPH WVGPN WVGPS7

22B

TGSF TGBF TGCZ TGFZ

19 20 20

TGBM TGHM5 A5 A

19

TGBL TGBT TGBZ TGHZ

VSGSF VSGBF VSGCZ VSGFZ5

25A 5

26A

VGBL VGBH VGBZ VGHZ

25

VGPH VGPN VGPS

23

VGPR5

24A

VGBM VGHM5 A

26

-

RSGPW10

-

RSGPS10

-5 A

RSTKH

-5 T

RBJA 5 T A

-

RSWP

5 A

PRODUCT DATA STRIPPER GUIDE PINS & BUSHINGS

Plain bushing Ball bearing bushings

Clearance between

pin and bushing

Before

press fit

Clearance between

pin and bushing

After

press fit

Clearance between mounting hole and outside

diameter of bushing(recommended value)outside diameter of bushing

+2~+3 on one side to

outside diameter of bushing

+0.01~+0.03 on one side to

How to mountDevcon

adhesive

outside diameter of bushing

+0.01~+0.03 on one side to

Press fit Press fit Press fit

Inside diameter shrinkage while press fitting

Recommended press fit allowance for plate

SGBL,SGBT,SGBZ,SGHZ,etc.

Devconadhesive type

Press fit typeStraight type

Press fit type-Headed type-

Press fit typeLoctite adhesive type

See page 51 for Loctite adhesives.

IHow to mount stripper guide bushings

IMeasurement of fixed compression shear strength of guide bushings with Loctite 638

ISintered alloy oil-free bushings

With Loctite adhesive, shear force of 8~10 times greater than press fit(interference fit)was obtained.

Bushing that is made of special alloy and covered with fine solid lubricant, which is mainly

made of graphite. The small vacancies of the alloy are impregnated with lubricating oil.

Features Structure of special sintered alloy

SGBBL,SGBBF,SGBBW,SGBBS,etc.

Loctite adhesive type

Subject bushing Type

Stripper guide bushingLoctite adhesive type

Precision class stripper guide bushingLoctite adhesive type

Stripper guide bushingPress fit type (close fit)

Fitting clearance(Both sides)

Compression shear force Compression shear strength

Can be used for to subtle strokes of less than 1mm.

The solid lubricant on the surface enables the extra short strokes. Best suited as stripper guide bushing.

No limit in sliding direction. Can put up with reciprocating, rocking, and rotational motions.

Have excellent friction coefficients and wear resistance to cope with high-speed strokes.

Owing to new technologies, a large amount of solid lubricant is contained compared to other sintered

bushings. That makes it possible to maintain stable performance over a long period of time.

Though it is oil-free, its performance will be further enhanced with initial break-in grease or lubrication.

Range of useLubrication:Oil-free

Operating temperature limit:-40~+120AAllowable maximum speed:60m/min

Mechanical propertyThermal expansion coefficient:Density:

Test dataTest machine:Reciprocating motion test machine

Bushing:Guide pin:Bearing:Rate:Stroke:Lubrication:Application of initial breaking-in grease

Curing time:Room temperature(25A)M72 hours Plate:S50C Guide bushing:SUJ2

Plate and bushing had been degreased.

Compression test machine

Extracting rate:10mm/min

Extracting jig

Plate

Loctite layer

Subject bushing

Bea

ring

tem

pera

ture(

A)

Endurance time(hr)

Transition of bearing temperatures in various bearing materials

From other manufacturersF20-25

Graphite contained copper alloy

Copper alloy oil-free type bushing

(Sintered alloy oil-free type bushing)

Trade name

From othermanufacturers

Graphite embedded copper alloyoil-free type bushing

Copper alloyoil-free type bushing

Sintered alloyoil-free type bushing

Proportional abrasion loss

- -

12M10-6/A5.8g/cm3

F20MF28ML25

VGPS20(SKD11 58HRC~)1.2N/mm2 12kgf/cm2

30m/min,300spm

50mm

mm/(N/mm2C/sChr)

Special alloy

Graphite

Vacancy(filled with oil)

Item

K

K

K

KC

CC

C

CAs the bushing is impregnated with lubricating oil, do not clean the inside of it.

CIt is not possible to accurately measure the surface roughness because there are small vacancies

in the material. However, the finishing method is the same as that of other types of guide bushings.

KNotes

STRIPPER GUIDE PINS & BUSHINGS

STRIPPER GUIDEPINS & BUSHINGS

DeliveryPage

Name STRIPPER GUIDE PINS-Headed type-

HIGH RIGIDITY STRIPPER GUIDE PINS FIXED-TYPE STOPPERS FOR BALL BEARING GUIDE CLAMPS FOR STRIPPER GUIDE PIN STRIPPER GUIDE BUSHINGS-Steel- -Oil free--Copper alloy-

-Sintered alloy- STRIPPER GUIDE BUSHINGS STRIPPER GUIDE BUSHINGS BALL BEARING CAGES SPRINGS-Copper alloy-

STRIPPER GUIDE PINS-3Om range- STRIPPER GUIDE BUSHINGS-3Om range, Steel--Demountable type-

-Demountable type-

HIGH RIGIDITY NEEDLE ROLLER STRIPPER GUIDE PIN SETS -Single roller type- NEEDLE ROLLER CAGE FIXING TYPE STOPPERS FOR NEEDLE ROLLER SPRINGS

-Copper alloy- -Sintered alloy- HIGH PRECISION CARBIDE STRIPPER GUIDE PINS

-Copper alloy- -Sintered alloy-

STRIPPER GUIDE PINS-Straight type- STRIPPER GUIDE PINS-Demountable type-

No.638No.638Loctite adhesiveLoctite adhesive

3

33

STOCK3 STOCK3 STOCK3 STOCK STOCK

33 3

HIGH PRECISION STRIPPER GUIDE PINS HIGH PRECISION STRIPPER GUIDE BUSHINGS-Steel-

5 T ASTOCK 5 T A STOCK STOCK

Please note that the above delivery day only applicable to Singapore area. For other areas, please refer to P.i

001-002.ai 5/30/2011 6:09:07 PM

Catalog No.

RSGPW

SGPWSSGPWH

-0.010

-0.015

-0.010-0.013

-0.010-0.013

-0.010-0.013-0.010-0.012

-0.012-0.010

SUJ2

SUJ2

SKD11

SUJ2

Catalog No.

SGPH

SGOH

VGPH

TGPH

SGON-0.015 SUJ2

SKD11

SKD11

VGPN

SUJ2TGPN

VGPS

SUJ2-0.010 SGPN

Catalog No.

WVGPN

WVGPS

-0.010

-0.012

SGOR-0.015 SUJ2

SUJ2-0.010 SGPR

Catalog No.

VGPR SKD11

-0.010

-0.015

Catalog No.

SGPW SUJ2

Catalog No.

Catalog No.

SGBASGBHSGBDSGBL

VGBHVGBL

+0

-0.0050

-0.005-0.003

-0.013-0.010

-0.008-0.003

-0.008-0.003

-0.006-0.003

SUJ2

SUJ2

TGBZTGHZ

SGBZSGHZ

FC250

-0.008-0.003

-0.006-0.003

-0.005-0.003

-0.008-0.003

-0.006-0.003

-0.005-0.003

-0.008-0.003

-0.006-0.003

-0.005-0.003

Catalog No.SGSFSGBF

VSGSFVSGBFSGCZSGFZ

VSGCZVSGFZ

Catalog No.

SGBBL

SGBBF

SGBB

SUJ2

0.005

WVGPH

SGBTTGBLTGBT

SUJ2

MBSHCMBJH

-

P.9

P.5

P.22

P.23

P.18

P.6

P.23

P.18

P.22

P.7

P.24

TGPR SUJ2 P.18

P.8

P.13

P.25

P.12

P.19

-0.005-0.003 VGBZ

VGHZP.25

P.12

Catalog No.

TGBMTGHM

SGBMSGHM

P.19

VGBMVGHM

P.26

P.13

P.11

P.19

P.25

P.26

TGSFTGBF

TGCZTGFZ

P.19

P.19

P.14

Catalog No.

SGBBW

SGBBS

SGBBH

SUJ2 P.15

K

K

K

K

K

K

K

K

K

K

K

K

K

K

SRW

SRW

43

IStripper guide pins IStripper guide bushingsType Example Overview

Headed type

Straight type

Demountable type

Demountable and both ends tapped type

Stripper plate fixing type

ExampleType

Lubricant type

Oil-free type

Ball bearing

Oil-free type

Oil type

Cage-integrated type

Ball bearing Cage-separated type

(Copper alloy internal coating)

Oil-free type

(Sintered alloy)

Guide type Refer page

Oil groove

Sliding part diam.tolerance Material Type Refer page

(High precision)

(High precision)

Oil groove

MaterialSliding part diam.tolerance Type Refer page

Carbide

Carbide

Carbide

Lead-in part

Lead-in part

Oil groove

MaterialSliding part diam.tolerance Type Refer page

MaterialSliding part diam.tolerance Refer page

Since the guide pin is fixed to the stripper plate, which is close to

the cutting part (punchCdie), the shaft rigidity can be improved

compared to conventional fixing methods. Therefore, higher levels

of precise punching and durability can be realized.

Lead-in part:Lead-in part is provided on the threaded side.

By adjusting the mounting hole, this type can be

fixed either by press fit or transition fit.

Straight demountable type is mounted with a bolt from

the die set side. It enables demounting without disassembling the dies.

Perpendicular can be retained by mounting it in contact with the

punch plate face firmly.

SRW ring:This ring can be used to retain the pin when the hole is

through without backing plate.

Int. dia. tolerance Material Type How to mount Refer page


Straight

Headed

Straight

Straight

Headed

Straight

Press fit

Devcon adhesive

Loctite adhesiveHeaded

Straight

Headed

Straight

Lubricant

type

Oil-free

type

Oil-free

type

Straight

Headed

Straight

HeadedLoctite adhesive

Straight

SUJ2+Copper alloy

Headed

Straight

Headed

Type

Type


Material Type How to mount Refer page

Headed

Straight

Loctite adhesive

Press fit

Devcon adhesive type:2~3mm clearance on each side of the mounting hole.

Loctite adhesive type:0.01~0.03mm clearance on each side of the mounting hole.

Press fit type:While the precision hole is required for mounting, these stripper guide bushings

enable parallel machining and assembly that results improvement in workability.

Oil-free typeELubrication is not needed because special solid lubricant is embedded.

The guide's internal surface is coated with copper alloy for improved seize resistance.

There are oil type and oil- free type in which special solid lubricant is embedded.

Using ball bearings for sliding motion enables outstanding seize resistance.

(Endurance will be further improved with initial breaking-in oil.)

This stripper guide pin is for the dies with which the upper die is pushed up from the

bottom, e.g. for intermittent cutting process of progressive dies, tapping types, etc.

Both ends are fastened with snap rings, so the cage cannot drop out of

the bushing.

Headed

StraightLoctite adhesive

Headed

SRW ringEUse it as a stopper on the die plate side

of the stripper guide pin.

-GUIDE-STRIPER GUIDE PINS & BUSHINGS

Headed

Straight


Loctite adhesiveHeaded

Special

sintered alloyStraight

Headed

Straight

Sintered alloy typeE

Headed

Straight

Straight

Headed

Straight

Headed

Material Type How to mount Refer page

Thick

Headed

Straight Loctite adhesive

Using ball bearings for sliding motion enables outstanding seize resistance.

Please note that the stroke is limited.

For the ball cage, use MBSH(made of aluminum)or MBJH(made of plastic).(See P.16)

See page 51 for Loctite adhesives.

A new type of oil-free bushing produced from a special alloy on which solid lubricant made mainly of

graphite is dispersed and sintered. Its friction coefficient is lower than those of other cast iron and

copper alloy bushings, and wear resistance is superior. Sufficient amount of solid lubricant makes its

oil content high, allowing high-speed operation without losing oil film.

Punch plate

Punch plate

Stripper plate

Stripper plate

Die plate

Die plate

Spring

Screw plug

Punch plate

Stripper plate

Die plate

Punch plate

Punch plate

Stripper plate

Stripper plate

Die plate

Die plate

Spring

Punch plate

Punch plate

Punch plate

Punch plate

Stripper plate

Stripper plate

Stripper plate

Stripper plate

Die plate

Punch plate

Stripper plate

Die plate

Die plate

Die plate

Die plate

Punch plate

Stripper plate

Die plate

Needle roller bearing guide

Ball bearing guide/Plain guide

(High precision)

(High precision)

(High precision)

(High precision)

(High precision)

(High precision)(High precision)




Overview


SRW P.92

SRW P.92

(3Om ) range

(3Om ) range

(3Om ) range

(3Om )(3Om )range

range

(3Om )(3Om )

(3Om )(3Om )

rangerange

rangerange

(3Om )(3Om )

rangerange

(3Om )(3Om )

rangerange

003-004.ai 5/28/2011 10:47:29 AM

65

SGOHSGPHPrice

140<LC¯200140<LC¯200140<LC¯200120<LC¯180100<LC¯150

80<LC¯120

LC

25201613108

D

SGPHSGOH

20¯LC<L

40¯LC<L

LC

Price PriceSpec.

BC

LC

CodeAlteration

BCB

LLC

0¯BC¯DM2

SGOH

SGPH

5

Catalog No. L(LC) (BCCTCCGCCTKCCRC)

SGPH 16 LC95 BC15

5

100

L

SGPH 16

Catalog No.

SGOHSGPH

140*

140*

130*

130*

120*

120*

120*

120*

110*

110*

110*

110*

100*

100*

100*

100*

90*

90*

90*

90*

90*

80*

80*

80*

80*

80*80

70*

70*

70*

70*

70*70

60*

60*

60*

60*

60

50*

50*

50*

50

40*100*

40

L

25*

20*

16*

13*

10*

8

D

SGOH*SGPH

28

25

20

16

13

10

2.0

1.5

1.0

TypeCatalog No.

25

20

16

13

10

8

BR

8888

7777

666666

555555

444444

333333

222222

180~160~90~80~70~50~40~

2520161310

8

L120~L(C)max.GL 40~119.5

8FFFFB

L+0.30

D-

0.0

15

-0

.01

0

R

0.2

DL

+0.008

+0.017

+0.007

+0.015

+0.006

+0.012

D

SGOH

SGPH

2¯TC<5

0+0.02

0+0.3

T

TC

T

T

RC

D+

3

5 +0.30 R¯0.5 R

-0

.01

0-

0.0

15

D

B

0+0.3L

0.2

1.6

0+0.35

D+

3

D1.6

130* 140*

TC

TKC

RC

R¯0.5

m5

LLC

m5

D

F=108

m5

Spec.CodeAlteration

40

GC

D Y

2520161310

815B Y 3

5

D8C10

13C1620C25

1.01.52.0

1.5C2.02.0C2.52.5C3.0

--

--

F=

K

K

K

K

::

When full length is reduced shorter than min.

length, apply BC accordingly if needed.

Changes dimension L(full length) 0.5mm increments

Full length L is the dimension as specified.

U/Price Q'ty:1~9

Number of grooves(n)(Oil groove type)

Changes dimension T(head thickness) 0.1mm increments

When LC is applied, the full length is equal to LC.

L becomes shorter by(5-TC).

Changes dimension B 1mm increments

Adds taper on the tip

Changes dimension

R(radius)on the tip

Normal type R RC(Selection)

-HEADED TYPE-STRIPPER GUIDE PINS

58HRC~SUJ2

58HRC~SUJ2

Order

Delivery

Alteration


RateQuantity 50~99

10%1~9 10~49

5%100~200

15%-

0.5mm increments

Changes dimension L(full length)(Long type LC)

Changes head

thickness tolerance

The B dimension conforms to the standard.

T

A

A

Days

ExpressExpressDays

Express

SGOH with * are Stock Product. SGON with * are Stock Product.



SGP StockSGP StockPrinted in Red

volume discount rate is also aAll price &


¡ SGPH SGOH* ¡ SGOH (w/o *)

syaD3For area out of Singapore please refer to P.i.

syaD3

Stocks Availability Subjected to Prior Sales.

SGPN

SGON

D

+0.024

+0.015

+0.029

+0.018

+0.035

+0.022

M5M12

M6M15

M8M20

P0.8

P1.0

P1.25

Dp6

MM B

L +0.30

D-

0.0

15

-0

.01

0

2 R

1.6G

0.2

0.2G

1.6

R2

D

0+0.3L

B

p6D

F F F F 8

R B

8

10

13

16

20

25

Catalog No.Type

1.0

1.5

2.0

10

13

16

20

25

28

SGPNSGON*

D

8

10

13*

16*

20*

25*

L

40

10040

50

50

50

50

60

60

60*

60

60

7070

70*

70*

70*

70

8080

80*

80*

80*

80

90

90*

90*

90*

90*

100*

100*

100*

100

110

110*

110*

110

120

120*

120

120

130

130

140

140

SGPN SGON

Catalog No.

SGPN 20

L

80

5

BC20LC75SGPN 20

(BCCDKCCGCCRCCTGC)Catalog No.

5

SGPN

SGON

0¯BC¯DM2

LCL

BBC

LC

BC

0.01 A

A

LCLLC

p6

40

Spec.CodeAlteration Spec.CodeAlteration

GC

DKC

TGC

D Y

25

20

16

13

10

815B Y

3

5

DK

C

Dm5

25

20

16

13

10+0.012+0.006

+0.015+0.007

+0.017+0.008

8

Dp6 Dm5

RCD

1.01.52.0

RC

1.6

8888

7777

666666

555555

444444

333333

222222

180~160~90~80~70~50~40~

2520161310

8D

L

--

--

L120~L(C)max.GL 40~119.5

F=108F=

SGONSGPNPrice

140<LC¯200140<LC¯200120<LC¯200120<LC¯180100<LC¯150

80<LC¯120

LC

25201613108

D

-0

.01

5-

0.0

10

MM

L(LC)

K

K

SGPN SGON20¯LC<L 40¯LC<LK K: :

1.5C2.02.0C2.52.5C3.0

8C1013C1620C25

MMPitch

Price Price

P.i

(Oil groove type) Number of grooves(n)

58HRC~SUJ2

U/Price Q'ty:1~9

Using BC code

Full length L and tap depth are the dimensions as specified.

When BC=0,2mm groove is eliminated.


Changes dimension L(full length) 0.5mm increments

When full length is reduced shorter than min.

length, apply BC accordingly if needed.

Changes dimension L(full length)(Long type LC) Adds taper on the tip

Modifies the tap side end

Perpendicularity 0.01/Surface

roughness 1.6a

Changes press fit tolerance

SGON:Not applicable

-STRAIGHT TYPE-STRIPPER GUIDE PINS

Changes dimension

R(radius)on the tip


Alteration

Delivery

Order

58HRC~SUJ2


RateQuantity 50~99

10%1~9 10~49

5%100~200

15%-

0.5mm increments

The B dimension conforms to the standard.

When LC ¯25, the pilot hole for tapping

may go through.

T

A

ADays Express Express

Days Express


¡ SGPNC SGON* ¡ SGPN Printed in BlueC SGON w/o*


005-006.ai 5/28/2011 10:48:43 AM

87

SGOR

SGPRK

K

SGOR

SGPRK

K

L(LC)

SGORSGPRPrice

120<LC¯140120<LC¯140120<LC¯140100<LC¯12080<LC¯10070<LC¯ 80

LC

25201613108

D

D Y

2520161310

815B

3

5

D8C10

13C1620C25

1.01.52.0

1.5C2.02.0C2.52.5C3.0

SGPR

SGOR

M5M12

M6M15

M8M20

P0.8

P1.0

P1.25

L(C)

D

81013162025

30~ 40~ 60~ 70~ 80~2

2

2

2

2

2

3

3

3

3

3

3

4

4

4

4

4

4

5

5

5

5

5

5

6

6

6

6

6

SGPRSGOR

Catalog No.

SGPR 16

L

100

5LC95SGPR 16

Catalog No.

P.i

P.i

5 P.i

5

D

D1

5

D0

-0

.00

5

D -0.03-0.05 3

0-0.2B

1.6

L

R

0.2

-0

.00

50

D

5

1D

1.6

B -0.20

3-0.05-0.03D

0.2

L

F F F F F 8

D-

0.0

10

-0

.01

5

R

D1

13

16

20

23

27

32

R

1.0

1.5

2.0

B

8

10

13

16

Catalog No.Type D

8

10

13

16

20

25

LSGPR SGOR

30

30

40

40

40

40

50

50

50

50

50

6060

60

60

60

60

70

70

70

70

70

70

80

80

80

80

80

90

90

90

90

100

100

100

100

110

110

110

120

120

120

P.92SRW

LC

L

LC

L

LC

Spec.

LC

CodeAlteration Spec.CodeAlteration

GC

Y

BCBC

RCRC

MM

-0

.01

5-

0.0

10

+0.30

+0.30

MM

L120~L(C)max.GL(C)30~119.5

F=108F=

-

MMPitch

(BCCGCCRC)

Price Price


MMPitch

BC6LC54SGPW 10

(BC)Catalog No. L(LC)

Price Price

5¯BC<B

SGPW

D-

0.0

3-

0.0

5

D0

-

0.0

05

2

B 0-0.3

T

L+0.020

0.2

D

N R

D R T B

8~13

12

1.0

8

17

Catalog No.

Type D

8

10~15 1.5

14 10

13

25~ 70

30~ 75SGPW

M4M12P0.7

M5M15P0.8

M4P0.7

M5P0.8

L

3

10

13

16

1

55

L

SGPW 10

Catalog No.

NPitch

D1

Alteration Spec.Code

BCBC

23 16 40~100M6M15P1.0

M6P1.0

2716~21 2.0

5

2060~120M8M20

P1.25M8

P1.2532 25

P.P.

S.P.

D.P.

S.P.

P.P.

SGPWP.P.

S.P.

D.P.

SGPW

SRW SRW

5

Alteration Spec.Code

LC D 8~13 25¯LC<L

D16~25(Lmin-5)̄ LC<LLC

L

P.i

P.92 P.92

MM

-0

.01

5-

0.0

10

-DEMOUNTABLE AND BOTH ENDS TAPPED TYPE-STRIPPER GUIDE PINS

58HRC~SUJ2

U/Price

Q'ty:1~95mm increments

Days Express Express

Days

Alteration

Delivery

Order

3

T A


RateQuantity 50~99

10%1~9 10~49

5%100~200

15%-

0.5mm increments

Changes dimension L(full length)

The depth of M tap becomes

shorter by(B-BC).


Use this stripper guide pin for the dies with which the punch plate is pushed up from the lower die side.Example

Lower die set

Cylinder

Screw plug

Spring

Upper die set

Intermittent cutting process of progressive die Movable bottom die

Tapping bar

Spring

Screw plug

Uppe

r die

Low

er d

ie

¡ Printed in Red ¡ Printed in Blue


-DEMOUNTABLE TYPE-STRIPPER GUIDE PINS

SUJ2

58HRC~

(Oil groove type)

58HRC~SUJ2

Number of grooves(n)

U/Price Q'ty:1~9

Order

Delivery

Alteration

Days Express

Days3

A


RateQuantity 50~99

10%1~9 10~49

5%100~200

15%-

Washer for SGPR

Example

Days Express Express

Days Express

T

A

A


0.5mm increments

0.5mm increments

Changes dimension L(full length)(Long type LC)

30¯LC<L

Adds taper on the tip

The depth of M tap becomes shorter by(B-BC).



Changes dimension

R(radius)on the tip

5¯BC<B







e volume discount rate is also All price &


007-008.ai 5/28/2011 10:50:12 AM

109

LAC 78SGPWH 20 50

LAC LBC

TC NC

PC

B25 TC4

16 10~2010~20

20 11~2525 11~30

12SSTK 16

13

S

SGPWS SGPWH

10~30

B3060100SGPWS 25

13

16

20

25

30~5030~6040~6030~6030~7040~8040~7040~7050~8050~7050~8060~90

6070807080908090

10090

100110

LB LA

B

DD

LB LA

B

MMPitch

LA(LAC) LB(LBC) BCatalog No. (TCCPCCNC)

Price Price

1 2

Alteration Code Spec. Spec.CodeAlteration

D LA

60¯LAC< 7071¯LAC< 8061¯LAC< 7050¯LAC< 6060

70807080908090

10090

100110

16

13

71¯LAC< 8081¯LAC< 9070¯LAC< 8081¯LAC< 902091¯LAC<10080¯LAC< 90

25 91¯LAC<100101¯LAC<110

D LA

20¯LBC<6030¯LBC<6020¯LBC<6020¯LBC<5060

70807080908090

10090

100110

16

13

20¯LBC<7030¯LBC<8030¯LBC<7030¯LBC<702040¯LBC<8040¯LBC<70

25 40¯LBC<8050¯LBC<90

LAC

LA

LBC

LB

1

5

PC

TC

10

1

15B

D t MCatalog No.

Type No.D1

17.3

24

29

15

19

24

8.5

11

SCatalog No.

15 12 6.5

6

8

5

P.i

S

10~13PD

(No.) 14~18 19~23 24~28 29~30

M6M15

M8M15

M8M15

M6M20

M8M20

M8M20

M6M25

M8M25

M8M25

-

M8M30

M8M30

-

M5M15 M5M20 M5M25 - -

-

M8M35

13

16

20

25

D

1D

M

3

t

U RCatalog No.Type D LA

3

4

M5M22

P0.8

M8M25

P1.25

M6M25

P1.02

2 1.5

3

BLBLACatalog No.

---

0.5

2

D+

0.0

10

+0

.01

5

-0

.01

4-

0.0

10

U

R0.2 1.6 0.2

15B

+0

.01

5D

+0

.01

0

-0

.01

0-

0.0

14

R

5

15B0.2 1.6 0.2

1.6

D+

7

5

5

U

PD

4FCLP 5

FCLP

Catalog No.

Type TM

MCatalog No.

FCLP 45

P.i5

MMR

MMR

10 8

T=5

10 8 4.5

5

13

.5

P.C.

D=D+

18

M

D



-STRIPPER PLATE FIXING TYPE-HIGH RIGIDITY STRIPPER GUIDE PINS FIXED-TYPE STOPPERS FOR BALL BEARING GUIDES / CLAMPS FOR STRIPPER GUIDE PIN

Changes flange thickness 3¯TC<5

1mm increments

Applicable to SGPWH

Adds groove for bolt fixing

Applicable to SGPWH B˘16

Fixed at 10mm position(for M6)

5¯PC¯B-5

Adds groove for bolt fixing 1mm increments

Applicable to SGPWS

SGPWS and SGPWH can be used with any bushings listed on pages 11 to 16. Select a suitable combination according to the nature of operation.

S1mm increments

U/PriceQ'ty:1~9

SSTK(Fixed-type stopper)

Use SSTK when setting a stripper guide bushing for ball cage(P.15)to SGPWS and SGPWH.

1Bolt CB

S45C

Black oxide(Fe3O4)1CB 2Spring washer

SSTK (Fixed-type stopper for ball bearing)

(Clamp for stripper guide pin)

No surface

treatment

to the bottom

SGPWS (Straight type)

SGPWH (Flanged type)

B1mm increments

LB10mm increments

SGPWH

SGPWS(Straight type)

(Flanged type)


-RateQuantity

5%1~9 10~20

The tap depth becomes shorter by(LB-LBC).

1mm increments

Dimension LA alteration

The tap depth becomes shorter by(LA-LAC).

Days

Days Express


-RateQuantity

5%1~9 10~20

DeliveryOrder

Alteration

Order

Delivery

U/Price (1Pc.)

Q'ty:1~9

S45C

Black oxide(Fe3O4)CB4-10

Days Express


-RateQuantity

5%1~9 10~20

Order

Delivery

58HRC~SUJ2

58HRC~SUJ2

U/Price Q'ty:1~9

Changes dimension LB1mm increments

SGPWH(Flanged type)

FCLP can be used as a clamp for SGPWH, RSGPW and

RSGPS. For D20 and below, use three clamps, and for D25

and adove, use four clamps.

A

A




009-010.ai 5/28/2011 10:50:50 AM

1211

DCatalog No.

Type dL

12

14

18

22

25

32

SGBD

81013162025

1010

131313

16161616

2020202020

2525252525

303030 35

SGBD

SGBA

13

13

13

13SGBA

20

25

16

12

Catalog No.

Type d

10

8

10

10

252016

30

30

30

20

2016

25

25

25

35

20

20

16

16

25

L

+0.020+0.01214

18

22

25

32

+0.024+0.015

+0.017+0.028

SGBH

SGBL

SGBH

+0.020+0.009

+0.008+0.017

25

32

22

20

25

16

30

30

30

20

2016

16 25

25

25

35

35

35

3513

13

13

13

+0.007+0.01514

18

12

Catalog No.

Type d

10

13

8

10

10

3020

20

20

16

16

16

25

25

L

SGBL

0-0.007

-0.0060

25

32

22

20

25

16

30

30

30

20

20

20

2016

25

25

25

35

35

35

13

13

13

-0.005014

18

12

Catalog No.

Type d

10

13

8

10

10

3020

20

20

16

16

16

25

25

22

22

22

22

22

22

22

22

22

22

22

22

22

22

22

22

22

22

22

22

L

Dn5

m5D

Dh4

D0

+0

.3

d-

0.0

08

-0

.00

3

6.3

0.2

L0

-0.2

41

L

Dn5

A0

-0.2L

3

0.2

0+

0.0

05

d1.6

G

D-0.03-0.05

AF0.01

D+

3

-0.20

L

3+0.3

0 3-0.05-0.03

D

Dm

5

F0.01 A

0

0.2

-0

.00

5d

A

0-0.2L

0.2

-0

.00

8-

0.0

03

L14

d

Dh4

A3 -0.05

-0.03D

1.6G

F0.01 A

1.6G

35

L14

SGBT

0-0.007

-0.0060

25

32

22

20

25

16

30

30

30

20

20

2016

25

25

25

35

35

35

3513

13

13

-0.005014

18

12

Catalog No.

Type d

10

13

8

10

10

3020

20

20

16

16

16

25

25

22

22

22

22

22

LDh4

16

13

16

13

SGBZ

13

1624 0-0.006

-0.007034

28

25

20

0-0.005

16

20

13

Catalog No.

SGBZ

Type

10

13

8 10

d

3025 35

2016

L

10 13

13

13

16

16

16

16

20

20

20

20

20

25

25

25

25

30

30

30

35

35

h4D

30

30

30

30

SGHZ

20 2520161313SGHZ

34

28

24

-0.0070

-0.0060 13

20

25

16

20

20

20

16

16

25

25

25

Type

Catalog No.

16

130

-0.005

h4D

13

13

d

8

10 10

10

20

20

16

16

25

L

35

35

35

0-0.2

A

L

h4D

1.6G

-0

.00

3-

0.0

08

-0.05-0.03

D3

d

F0.01

0.2

A

-0.2

D+

2

3 0

L0

+0.3

1.6G

-0

.00

3-

0.0

08

h4

-0.05-0.03

D

3D

d

A

F0.01

0.2

A

D+

3

-0.20

L

3+0.3

0 3-0.05-0.03

D

Dh4

F0.01 A

0.2

-0

.00

8-

0.0

03

d

A

1.6G

SGBTSGBH 10

Catalog No.

16

L

SGBD 16

Catalog No.

LC22.0

L(LC) 5

:L¯20 2L>20 3

SGSF

SGBF

13

20

25

16

16

Catalog No.

Type d

10

L

0-0.005

20

24

28

34

-0.0060

-0.0070

SGSF

10 13

13

16

16

16

16

20

20

20

20

22

22

22

22

20 22

25

25

25

25

25

30

30

30

30 35

35

35

20 22

35

35

Dh4

SGBF-0.00624 16

-0.007034

28

25

20

D

0

-0.0050

20

16

Catalog No.

Typeh4

d

13

10

13

10 13

30

30

25222016

16

30

302220

25

25

35

22

22

16 20

16 20

25

25

L

-0

.00

3

A

Dh4

30

-0.2L

D-0.05-0.03

d-

0.0

08

F0.011.6

G

0.2

A

D+

2

-0

.00

8

h4

33 0

-0.20

L

+0.3 A-0.03-0.05D

-0

.00

3d

D

F0.01

0.2

A1.6G

Catalog No.SGBD 8SGBD10SGBD13SGBD16SGBD20SGBD25

A 8

10

13

16

20

25

B

25

35

45B 5A

SGBD

2~3mm

AlterationCode

Spec.

Price

LC DLC

LCLC

RR

LCLC

8 8.0¯LC<L

d

10 8.0¯LC<L13 10.0¯LC<L16 13.0¯LC<L20 16.0¯LC<L25 20.0¯LC<L

-0.20

8 8.0¯LC<L

d


-0.20

SGBFCSGHZ SGSFCSGBZ SGBHCSGBT SGBDCSGBACSGBL




STRIPPER GUIDE BUSHINGS

SUJ2

58HRC~

Urethane ring

(Devcon adhesive type)

(Press fit type)

58HRC~

SUJ2

(Press fit type)

(Loctite adhesive type)

SUJ2

58HRC~

SUJ2

58HRC~

MoS2(embedded)FC250

FC250MoS2(embedded)

-OIL TYPE / OIL-FREE TYPE-


SUJ2

58HRC~

IOil type

KHow to use urethane ring

IDimensions of attached urethane ring SGBD

IOil-free type


RateQuantity

-

Use the stripper guide bushings at room temperatures(40A or less).

*MoS2(Molybdenum disulfide)is a special solid lubricant which provides outstanding wear resistance.

*Number of outside diameter grooves





45HRC

SUJ2+Copper alloy

45HRC

SUJ2+Copper alloy

ICopper alloy oil type Use the stripper guide bushings at room temperatures(40A or less).

Stripper guide pin

Devcon

Urethane ring provided with SGBD

Delivery

Order

AlterationDays

U/Price

Q'ty:1~9

Q'ty:1~9

U/Price

Q'ty:1~9

U/Price

Q'ty:1~9

U/Price

Q'ty:1~9

U/Price

Put the attached urethane ring to guide pin to prevent Devcon from dropping when adhering

Urethane ring is not provided when LC alteration is required.

50~99

10%1~9 10~49

5%100~200

15%

U/Price

Q'ty:1~9

Q'ty:1~9

U/Price

Q'ty:1~9

U/Price

Q'ty:1~9

U/Price


Days3

T AExpress Express

SGBD:Urethane ring is not provided when LC alteration is required.

LC0.1mm increments

Depending on the position of the solid lubricant, R may become large.

LC0.1mm increments

Machines grooves for Loctite.

Grooves for Loctite are machined on the outside diameter of bushing.

*Number of grooves on the outside diameter.

8.0¯L(LC)̄ 15.9U1

16.0¯L(LC)̄ 24.9U2

25.0¯L(LC)̄ 35.0U3

Straight type/Head type

Not applicable to SGBD,SGBA,SGBH,SGBL and SGBT.





011-012.ai 5/28/2011 6:46:34 PM

1413

STRIPPER GUIDE BUSHINGS-OIL-FREE TYPE-

LC

RR

LC

30

30

2220

35

35

SGCZ-0.00624 16

-0.007034

28

25

20

D

0

-0.0050

20

16

Catalog No.

Typeh4

d

13

10

13

10 13

3025222016

30

302220

2220

25

25

35

35

35

22

22

16 20

16 20

25

25

L

SGFZ-0.00624 16

-0.007034

28

25

20

D

0

-0.0050

20

16

Catalog No.

Typeh4

d

13

10

13

10 13

3025222016

16

16

30

302220

25

25

35

22

22

16 20

16 20

25

25

L

-0.20

A

L

Dh4

G1.6

-0.03-0.053 D

0.2

-0

.00

8-

0.0

03

d

F0.01 A

0.2

-0.2

D+

2

L

0+0.3

30

Dh4

-0.03-0.053

D

-0

.00

8-

0.0

03

d

A

F0.01 A1.6G

SGFZ 10

Catalog No.

16

L

SGFZ 16

Catalog No.

LC18.0

L(LC) 5

LCLC

30

30

2220

35

35

SGBM-0.00624 16

-0.007034

28

25

20

D

0

-0.0050

20

16

Catalog No.

Typeh4

d

13

10

13

10 13

3025222016

30

302220

2220

25

25

35

35

35

22

22

16 20

16 20

25

25

L

SGHM-0.00624 16

-0.007034

28

25

20

D

0

-0.0050

20

16

Catalog No.

Typeh4

d

13

10

13

10 13

3025222016

30

302220

25

25

35

22

22

16 20

16 20

25

25

L

-0.20

A

L

Dh4

G

-0.03-0.053 D

-0

.00

8-

0.0

03

d

F0.01 A

-0.2

D+

2

L

0+0.3

30

Dh4

-0.03-0.05

3D

-0

.00

8-

0.0

03

d

A

F0.01 AG

G

G

AlterationCode

Spec.

Price

LC DLC

d


-0.20

d


-0.20

SGHM SGBM SGFZ SGCZ

SGCZ (Loctite adhesive type)

SGFZ (Loctite adhesive type)

Q'ty:1~9

U/Price

Q'ty:1~9U/Price

45HRC

SUJ2+Copper alloy

(embedded)MoS2

LC0.1mm increments

*MoS2 is a special solid lubricant which provides outstanding wear resistance. *SUJ2 and copper alloy are coupled by sintering.

For SGCZ and SGFZ, R may become large

depending on the position of the solid lubricant.

LC0.1mm increments

ICopper alloy oil-free type

SGBM (Loctite adhesive type)

SGHM (Loctite adhesive type)

Special sintered alloy

Q'ty:1~9

U/Price

Q'ty:1~9

Special sintered alloy

ISintered alloy(Dispersed Solid lubricant)oil-free type

Use the stripper guide bushings at room temperatures(40A or less).

Product data P.2

Express ExpressDays

45HRC

SUJ2+Copper alloyMoS2 (embedded)


RateQuantity

-50~99

10%1~9 10~49

5%100~200

15%

Delivery

Order

Alteration

*SUJ2 and copper alloy are coupled by sintering.

*MoS2 is a special solid lubricant which provides outstanding wear resistance.

U/Price

Days3

T A


Depending on the position of the solid lubricant, R may become large.

Machines grooves for Loctite.

Grooves for Loctite are machined on the outside diameter of bushing.

*Number of grooves on the outer diameter.

8.0¯L(LC)̄ 15.9U1

16.0¯L(LC)̄ 24.9U2

25.0¯L(LC)̄ 35.0U3

Straight type/Head type




LC

8

10

13

16

20

25

8

10

13

16

20

25

0-0.2

20.0¯LC<L

25.0¯LC<L

30.0¯LC<L

30.0¯LC<L

35.0¯LC<L

40.0¯LC<L 35.0¯LC<L

25.0¯LC<L

25.0¯LC<L

22.5¯LC<L22.5¯LC<L

17.5¯LC<L

SGBB 20

Catalog No. L

SGBB 16.0Catalog No. 5

LC29.5L(LC)

Alteration

Code

Spec.

LC LC

d d

-0.20

LCLC

SGBB SGBBL SGBBF

SGBBL 20 35

SGBBF 13 LC22.5

LCatalog No.

Catalog No.

Type d

Type dL

16 24 15.67.8 8

2520

25

2530

3030

3035

3540

20 30 16.8 10

25 35 18.5 13

28 37 20.3 16

32 45 25.5 20

38

16

20

25

28

32

38

50

35

49

48

64

60

80

77

99

44

66

5

7

6

8

6

8

7

9

4

68 112

28.0

8.4

9.25

10.15

12.75

14.0 25

8

10

13

16

20

25

5

10

15

5

7.5

6

7

55

66

78

96

112

+0.020

0-0.005

0-0.006

0-0.007

+0.012

+0.015+0.024

+0.017+0.028

n5D

h4D

Dn5

-0.20

L

3-0.03-0.05D

d

S

1.6G1 2

Dh4

-0.20

L

L

3-0.03-0.05D

d

S

1.6G1 2

Dh4

D+

3

-0.20

+0.30

33

-0.03-0.05D

d

S

1.6G1 2

1 23

S

Catalog No.Type d

L

2520

25

2530

3030

3035

3540

16

20

25

28

32

38

35

49

48

64

60

80

77

99

44

66

5

7

6

8

6

8

7

9

4

68 112

8

10

13

16

20

25

10

15

5

7.5

0-0.005

0-0.006

0-0.007

h4D

Price

S

S

P.i

S


LC LC0.1mm increments 0.1mm increments

50~99

10%


RateQuantity 1~9

-10~49

5%100~200

15%

N n

N n

U/Price

Q'ty:1~9

U/PriceQ'ty:1~9

Maximumstroke Number

of rows Number of balls

Number of rows

Number of balls

Maximum stroke (Selection)

SGBB(Press fit type)

SGBBLLoctite

adhesive type

SGBB (Press fit type)

1SUJ22A5052S58HRC~

Since both ends of SGBB are fastened with snap rings, the ball cage does not come off from the main body.

1SUJ22A5052S58HRC~

Since both ends of SGBBL are fastened with snap rings, the ball cage does not come off from the main body.

SGBBF (Loctite adhesive type)

SGBBL (Loctite adhesive type)

1SUJ22A5052S58HRC~

Since both ends of SGBBF are fastened with snap rings, the ball cage does not come off from the main body.

SGBB

SGBB

SGBB13~25

8

10

EEEEEEEE

EE

EEEEE

SGBBL/F

SGBBL/F10~16

SGBBL/F20C25

8

N Number of rows(1EEN)

n Number of balls(1EEn)

Diameter of ballF2.381mm (3/32in.)Diameter of ballF1.588mm (1/16in.)

Diameter of ballF3.175mm (1/8in.)

Diameter of ballF3.0mm



1Insert the pin in the bushing fixed in the stripper plate.

23Push the pin down to the bottom dead center as the pin

and the bushing are interference fit of 2Om to 20Om.

Maximum stroke=SM2

Dimension S is{S-(L-LC)}(S˘2.5)

N n U/PriceQ'ty:1~9

Number of rows

Number of balls (Selection)

SGBBFLoctite

adhesive type

Maximum stroke

Dimension S is{S-(L-LC)}(S˘2.5)

IBall cage integrated type

Express Express

Delivery

Order

Example

DaysAlteration

Days3

T A

STRIPPER GUIDE BUSHINGS-BALL CAGE INTEGRATED TYPE-





Stocks Availability Subjected to Prior Sales.Stocks Availability Subjected to Prior Sales.

No



Cn




013-014.ai 5/28/2011 10:56:20 AM

Available in stock now for all sizes.Available in stock now for all sizes.

1615

DdCatalog No.

Type PDL

18

22

26

31

37

14

17

20

26

31

SGBBS

10

13

16

20

25

20

20

25

25

25

30

30

30

30

35

35

35

40

40

-0.0060

-0.0050

-0.0070

h4

DdCatalog No.

Type PDL

18

22

26

31

37

14

17

20

26

31

SGBBH

10

13

16

20

25

20

20

25

25

25

25

25

30

30

30

30

35

35

35

40

40

-0.0060

-0.0050

-0.0070

h4

DdCatalog No.

Type PDL

28

34

40

20

26

31

SGBBW16

20

25

35 40

40 45 50

45 50 60

-0.0050

2417 13 30 35D+

3

-0.20

L

3+0.3

0 3-0.05-0.03

D

Dh4

F0.01 A

-0

.02

5

0.2

-0

.03

0d

A

1.6G

0-0.2L

0.2

-0

.03

0-

0.0

25

L14

d

Dh4

A3 -0.05

-0.03D

1.6G

F0.01 A

1.6G

0.2

3

0-

0.0

05

D

-0

.02

5-

0.0

29

d

0-0.2

668

L-0.03-0.05DA

AF0.01

SGBBW 16

Catalog No.

35

L

SGBBW

SGBBSSGBBH

LC

16

20

25

10

13

16

20

25

0-0.2

30.0¯LC<L

35.0¯LC<L

40.0¯LC<L 30.0¯LC<L

20.0¯LC<L

20.0¯LC<L

15.0¯LC<L

15.0¯LC<L

SGBBH 16

Catalog No.

LC25.5

L(LC)

AlterationCode

Spec.

Price

LC LC DLC

PD

PD

-0.20

LCLC

SGBBW SGBBS SGBBH

13 25.0¯LC<L

SGBBF

BSWP

SGBBS

MBSHCMBJHSGBBW

MBSHCMBJH

SGBBW

5

SGBBW (Thick Wall, Loctite adhesive type)

SGBBH (Loctite adhesive type)

SGBBS (Loctite adhesive type)

SUJ2

58HRC~

SUJ2

58HRC~

SUJ2

58HRC~

U/Price

Q'ty:1~9

U/Price

Q'ty:1~9

U/Price

Q'ty:1~9

STRIPPER GUIDE BUSHINGS-FOR BALL BEARING-

50~99

10%


RateQuantity 1~9

-10~49

5%100~200

15%

Thick wall results in a

higher level of rigidity.

All stripper guide pins

can be coupled with.

(Same in SGBBW.)

IFeatures

LC0.1mm increments

LC0.1mm increments

Order

AlterationT ADays Express Express

Example

Delivery

SGPN ,etc.

SGPWH ,etc.

Changes dimension L(full length) Machines grooves for Loctite.

Grooves for Loctite are made on the outside

diameter of bushing.

Not applicable to SGBBW and SGBBS.

*Number of outer diameter grooves

8.0¯L(LC)̄ 15.9U1

16.0¯L(LC)̄ 24.9U2

25.0¯L(LC)̄ 35.0U3

syaD3





1 2

DCatalog No.

Type PD MBSH MBJHL

10.3

13.3

16.3

20.5

25.5

2

2

2

3

3

13.7

16.7

19.7

25.5

30.5

10

13

16

20

25

25

25

30

30

30

35

35

35

3530

35

40

40

40

45

45 50

D1

3 d

PDD

1D

L

MBJH 20

Catalog No.

45

LLC 42MBJH 20

L(LC)Catalog No.

Alteration Code Spec.

LCLC

DCatalog No.

Typed

PD

13

10

18.3

11.7

14.9

16.5

10.5

13.5

0.8

0.6

0.7

12

6

5

30~90

30~80

30~80

16

22.5 20.5 1.0 14 35~9020

27.9 25.5 1.2 14 40~9025

P

Catalog No.

BSWP 20

FL

80

Type PD30

10

BSWP

13

16

20

25

35 40 45 50 55 60 65 70 75 80 85 904.8 7.26.05.4 6.6 7.8 9.08.4 10.29.6 10.8

6 616 91214 11 9 78 7

10.1 10.74.9 7.26.15.4 6.6 7.8 8.98.4 9.6

17

-

3.2 4.23.73.4 4.0 4.5 5.04.8 6.15.65.3 5.8 6.4

-

--101315 11 9 88 77 6

-5.65.04.7 5.3 5.8 6.56.0 8.17.47.0 7.7 8.5

32 202326 22 19 1516 121314 12 11

283540 31 26 2223 161920 18 15

- -6.66.0 6.3 7.0 7.97.4 9.38.78.4 9.0 9.6

3038 34 28 2425 182022 19 17

1D

PD

FLP d

D1

D

Price

5

BALL BEARING CAGES / SPRINGS FOR BALL CAGE

1 MBSH2 MBJH

(High rigidity aluminum ball cage)

(High rigidity resin ball cage)

1A5052S(Aluminum)2POM(Polyacetal resin)3SUJ2 Sphericity pressure 0.25Om

362~67HRC

Diameter of ball d

U/Price Q'ty:1~9

MBSH

MBJH(Aluminum)

(Resin)

20¯LC<L

Changes dimension L(full length)1mm increments

Ball holes may remain

on the cut surface.15%30~50

-

IVolume discount rateQuantity

Rate20~2910~191~9

5% 10%

SWP-B

U/PriceFL5mm increments

BSWP(For Ball cage)

Spring solid height (mm) / Spring constant (g/mm)FL(Free length)

BSWP (Springs for ball cage)

(Free length)


RateQuantity 1~9

-10~20

5%

Delivery

Order

Days

Alteration

AExpress

Delivery

Order

5

AT

Days

Express

Express

Q'ty:1~9

Upper row: Solid height

Lower row: Spring constant

¡ MBSH MBJH

syaD3


Cvolume discount rate is also ap

All price &

AGE SGP StockSGP StockPrinted in Red






¡ Printed in Blue

t l N



015-016.ai 5/28/2011 10:59:51 AM

Date post:	10-Oct-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Extensive Range of Products Increase in Stocks Sizes ......Standard Components for Press Dies...

Documents