NP RP WPYELLOW3.7

GREEN4.2

BLUE5.2Screw hex.

0.50/ 1,27mm

19.013 19.014 19.014

Pack of 10 19.014-P10 19.014-P10

Analog

14.020 14.021 14.022

Pack of 10 14.021-P10

Transfer

17.020 17.021 17.022

Straight abutment

13.020 13.021 13.022

Angled abutment

15º 22.020 22.021

All abutments include final screw. Transfers include two screws (for open and closed tray).

EXTE

RNAL

HEX

BH

EXTERNAL HEX BH

price

$13

$13

$40

$49

$75

$90

$90

Includes an open and closed tray screw

Single

Single

Page 1 of 6

compatible with BioHorizons® External Hex

Temporary abutment

24.020 24.021 24.022

25.020 25.021 25.022

Castable

28.020 28.021 28.022

Pack of 10 11.021-P10

29.020 29.021 29.022

Pack of 10 12.021-P10

Ti base

15.051 15.052 15.053

16.051 16.052 16.053

Healing abutment

3mm 20.020/3 20.021/3 20.022/3

4mm 20.020/4 20.021/4 20.022/4

5mm 20.020/5 20.021/5 20.022/5

non-engagingengaging

EXTE

RNAL

HEX

BH

$50 Pack of 5 32.001-P5 32.003-P532.001-P5

33.001-P5 33.003-P533.001-P5

NP RP WPYELLOW3.7

GREEN4.2

BLUE5.2

EXTERNAL HEX BH

$31

$27

$90

$39

$24

price

$27

$90

All abutments include final screw, except castables in packs of 10 and scan abutments for desktop scanning.

Page 2 of 6

compatible with BioHorizons® External Hex

Plastic sleeves for on top of Straight Ti base *

collar height

* use indicated screw50.020 *19.013

50.021 *19.014

50.022 *19.014

52.020 52.021 52.022

Pre-milled blank

ø10mmD 61.021 61.022

EXTE

RNAL

HEX

BH

ø14mmD 71.021 71.022

EXTERNAL HEX BH

$45

$25

$49

$38

price

NP RP WPYELLOW3.7

GREEN4.2

BLUE5.2

Page 3 of 6

compatible with BioHorizons® External Hex

Desktop Scan Body - Round top

Intraoral Scan Body

Titanium

Chrome Cobalt

Volume discounts available - Please contact us for details

Library files for Exocad, 3Shape, and Dental Wings available on website

Includes one final screw

50.500-P10 50.600-P10

Scan Body on Ti base* $59

50.500-P10 50.600-P10

50.500-P10

50.600-P10

50.500-P10 50.600-P10

Non Engaging Engaging

* One size fits all. Slides over tibase, no screw required, autoclavable and reusable, available in package of 10 only. The engaging scanbody will slide onto the Straight and AngleBase® engaging ti bases. The non-engaging scan body will slide onto the Straight and AngleBase® non engaging ti bases. For use in creating restorations using straight ti base and AngleBase. FREE printable scan body STL available on website. The library file will either state (50.500 or 53.100) or (50.600 or 53.200) depending on which version you are using. Please check the part description on the website for a list of what of these scan bodies do not support (including all premills, multiunits, straumann tissue level, uniabutment, etc.) .

Dimensions- 7.5mm height x 4mm width (measurements excluding platform connection)

non-engaging engaging

MULTI-UNIT PLATFORM4.8

Page 4 of 6

Multiunit Titanium Healing Abutment**

20.007

$24

17.50717.507-P417.80717.807-P4

$40

$16$58

Impression Transfer for Multiunit**

Closed Tray Impression Transfer for Multiunit**

$16$58

Height

Hand tightens onto multiunit. Available as single and pack of 4 (P4).

price

17.007

Includes both open & closed tray screw

Screws onto multiunit abutment using Unigrip/Star driver screw. Drivers available.

Straight Multiunit Abutment are inserted using straight multiunit driver(part DTMURP- see page 8).

*This is the same straight multiunit driver used on Nobel®, Straumann®, 3i®, BioHorzions® and Megagen® Anyridge multiunits.** Impression transfers and healing abutments can be used on the following multiunits - DESS, Nobel®, 3i®, BioHorzions®, and Megagen® Anyridge.

5mm5mm8mm8mm

compatible BioHorizons® External Hex Multiunit

EXTERNAL HEX BH

$25

50.007

$49Intra Oral Scan Body for Multiunit

Desktop Scan Body for Multiunit

Screw sold seperately , use screw part #19.110

52.007

A hard anodized matted surface enables accurate scanning . Has an embedded screw for correct

positioning and an optional scan body driver is available, part # DTPEI, found on page 8.

Includes multiunit screw part #19.006 for unigrip/star driver.

Replace with screw part #19.110 for internal hex 1.27/050 driver.

$3915.007

15.007/8

15.054

Straight Ti Base of Multiunit Abutments

6.0mm vertical wall shaft

8.0mm vertical wall shaft

Page 5 of 6

EXTERNAL HEX BH

36.007Includes AngleBase screw part #19.306 - requires AngleBase Driver , see Page 8

$39

$131.27/.050 Hex final screw on top of Multiunit

AngleBase Ti Base on top of Multiunit Abutments

MULTI-UNIT PLATFORM4.8

price

19.110Flat head screw for components screwed onto the top of multiunit. The driver used is a internal hex 1.27/050. Screw sold seperately.

Up to 25º Angulated Screw Channel

Screw for Multiunit AngleBase 19.306 $13

32.007-P5 Pack of 5$50

non-engaging

* Plastic sleeves for casting or pressing. Castable should be cemented to ti base only. Screw sold seperately.

Plastic castable sleeves on top of multiunit tibase 15.007

Torque screw to 15ncm.

Library files for Exocad, 3Shape, and Dental Wings available on website

4.5mm vertical wall shaft

28.007Single Unit

Pack of 10, screw sold seperately 11.007-P10

$27

$90

$3124.007

Titanium Temporary Abutment on top of Multiunit

14.00714.007-P10

$13

$90

Multiunit Analog** - For 3D Printed Models

Single Unit10 Pack

Use same analog for both 3D printing and stone model

Plastic castable sleeves on top of Multiunit

DESS LOC on top of Multiunit

88.007$65

Screws onto the top of the Multiunit***

Unless noted, all abutments on top of the multiunit include a unigrip/star driver screw, part #19.006.

Torque is 15ncm. For the multiunit mini screw with the .050 hex top use part #19.110 (sold seperately).

** Multiunit Analog can be used for the following multiunits - DESS, Nobel®, 3i®, BioHorzions®, and Megagen® Anyridge.

*** The DESS LOC will screw onto the top of the following multiunits - DESS, Nobel®, 3i®, BioHorzions® , and Megagen® Anyridge.

compatible BioHorizons® External Hex Multiunit

DESSREFERENCE REF.Nº OF

ORIGINAL IMPLANTBRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

Screws fitting BioHorizons® implantsand similar external hex implant systems

19.013 130-050 NP H1,27 2,40

19.312 NP Torx® 06 2,40

19.014 140-050available

RP/WP H1,27 2,65

Torx® 06 2,6019.328 RP/WP

standa

rd

standa

rd

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND

PACKOF 10AVAILABLE

PLATFORM 1. SCREWSOCKET

2. HEADDIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT PLATFORM

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTS

Screws fitting BioHorizons® implantsand similar external hex implant systems

19.013 130-050 NP H1,27 2,40

19.312 NP Torx® 06 2,40

19.014 140-050available

RP/WP H1,27 2,65

19.328 RP/WP Torx® 06 2,60

Screws fitting Astra Tech Implants System™ EV and similar implant systems

19.058Uni-abutment®

(EV)H1,27 2,35

19.059 EV 3.6 H1,27 2,15

19.060 EV 4.2 H1,27 2,35

19.061 EV 4.8 H1,27 2,35

19.441 EV 3.6 Torx® 06 2,35

19.460 EV 4.2 Torx® 06 2,30

19.461 EV 4.8 Torx® 06 2,45

0º 2,00 6,60 1,80 1,30 3,50 UNF-1-72 30NcmStandard screw. Good also for bridges, structures and zirconia abutments

0º 7,10 1,50 1,30 3,50 UNF-1-72 30NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 2,00 7,10 1,80 1,30 4,00 M2,0 30NcmStandard screw. Good also for bridges, structures and zirconia abutments

0º 7,60 1,50 2,10 4,00 M2,0 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

EXTERNAL HEX BH

Page 6 of 6

compatible with BioHorizons® External Hex

Blank Page