+ All Categories
Home > Documents > FABRIC CLEANING INSTRUCTIONS

FABRIC CLEANING INSTRUCTIONS

Date post: 18-Dec-2021
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
1
Any mild cleaning product should be tested on a small, inconspicuous area prior to broad application on the shade panel. Do not use cleaning methods involving heat, bleach, abrasives, or solvents. Use of these methods will void the warranty. A swatch sample of the fabric may also be obtained through Customer Service for testing purposes. SOLAR SCREEN KLEENSCREEN | 3000 NET | 4000 NET | 3000 HT | 3000 RR | 4700 P | VIEW R | 4000 L | X-WEAVE Remove dust with a vacuum cleaner or compressed air. Clean with a sponge and warm soapy water using mild detergent. Rinse with clean water. Do not scrub. Do not use solvents or abrasives that could harm the coating of the fabric. Leave the blind down until completely dry. You may also very gently rub the fabric with a clean white pencil eraser to remove small stains. COMMERCIAL PVC FREE AMBIENT RENEW | AMBIENT | ANZIO | MESA LIGHT FILTERING Do not soak or completely immerse the fabric. Remove dust with Vacuum cleaner or compressed air. Clean by gently wiping with a sponge and warm soapy water. Do not scrub. Do not use solvents or abrasives. Leave the blind down until completely dry. MESA BLACKOUT | TEMPE Remove dust with a vacuum cleaner. Gentle wiping with a damp sponge and mild detergent. Do not soak or completely immerse the fabric, do not use any solvents, and do not rub. Leave the blind down until completely dry. HIGH PERFORMANCE BY VEROSOL SILVERSCREEN | OMNIASCREEN | ENVIROSCREEN Dust can be removed with a soft feather duster, cloth, or by vacuum that has a soft brush at the lowest setting. When deeper cleaning is needed, the colored side can be cleaned with a damp cloth. Avoid harsh cleansers and abrasives. Do not get metallized side wet. FABRIC CLEANING INSTRUCTIONS 7th Floor | 750 East Main Street, Stamford, CT 06902 USA P. 1-800-552-5100 F. 1-203-964-0513 E. [email protected] V 1.4 - 9.23.2021
Transcript

Any mild cleaning product should be tested on a small, inconspicuous area prior to broad application on the shade panel. Do not use cleaning methods involving heat, bleach, abrasives, or solvents. Use of these methods will void the warranty. A swatch sample of the fabric may also be obtained through Customer Service for testing purposes.

SOLAR SCREENKLEENSCREEN | 3000 NET | 4000 NET | 3000 HT | 3000 RR | 4700 P | VIEW R | 4000 L | X-WEAVERemove dust with a vacuum cleaner or compressed air. Clean with a sponge and warm soapy water using mild detergent. Rinse with clean water. Do not scrub. Do not use solvents or abrasives that could harm the coating of the fabric. Leave the blind down until completely dry. You may also very gently rub the fabric with a clean white pencil eraser to remove small stains.

COMMERCIAL PVC FREE AMBIENT RENEW | AMBIENT | ANZIO | MESA LIGHT FILTERINGDo not soak or completely immerse the fabric. Remove dust with Vacuum cleaner or compressed air. Clean by gently wiping with a sponge and warm soapy water. Do not scrub. Do not use solvents or abrasives. Leave the blind down until completely dry.

MESA BLACKOUT | TEMPERemove dust with a vacuum cleaner. Gentle wiping with a damp sponge and mild detergent. Do not soak or completely immerse the fabric, do not use any solvents, and do not rub. Leave the blind down until completely dry.

HIGH PERFORMANCE BY VEROSOLSILVERSCREEN | OMNIASCREEN | ENVIROSCREENDust can be removed with a soft feather duster, cloth, or by vacuum that has a soft brush at the lowest setting. When deeper cleaning is needed, the colored side can be cleaned with a damp cloth. Avoid harsh cleansers and abrasives. Do not get metallized side wet.

FABRIC CLEANING INSTRUCTIONS

7th Floor | 750 East Main Street, Stamford, CT 06902 USAP. 1-800-552-5100 F. 1-203-964-0513 E. [email protected] 1.4 - 9.23.2021

Recommended