Faculty Development Program on

Industry 4.0 and Smart Manufacturing

NAAC Accredited & NBA Accredited Branches (CSE, ECE, EN & IT)

June 10 – June 14, 2019

Technical Education Quality Improvement Program - Phase III (TEQIP-III)

Organized by

Department of Mechanical Engineering

ABES Engineering College, Ghaziabad

Chief Patrons

Prof. (Dr.) Vinay Kumar PathakVice Chancellor, Dr. APJAKTU, U.P.

Shri Neeraj GoelPresident, ABESEC

Patrons

Sh. Sachin Kumar GoelVice President, ABESEC

Sh. Raghunandan KansalAdvisor, ABESEC

Prof. Vijay Athavale

Director, ABESEC

Prof. (Dr.) Rajendra Kumar Shukla Professor & Head (ME)

Convener

Prof. Dharmendra SinghProfessor (ME)

Resource Persons For Fdp

The Resource personsare leading personalities from Academia and Industry. Course

content will also include practical sessions and case study from industry/research

projects.

Important Dates

Last Date of Application : June 06, 2019

Notification of Acceptance : June 07, 2019

Course Dates : June 10 – June 14, 2019

Incomplete application forms will not be accepted.

Registration

There is no registration fee for this course. This course is open to faculty members

from all Engineering Departments of an AKTU affiliated colleges. The participants

should have basic knowledge of engineering domain. Registration includes FDP

material, refreshments, and lunch, (Excluding Accommodation). Short listing and

confirmation of eligible candidates will be on a first come first serve basis.

Completed Scan Registration form should be sent by mail to the following address:

fdpme@abes.ac.in

The title of the email should be “FDP course on Industry 4.0 and Smart Manufacturing”

Transport, Boarding & Lodging

No TA/ DA will be given to the participants for attending this FDP. Accommodation, on first-

come first-serve basis, can be made available at ABES guest house on sharing basis on

payment, and it is subject to availability. Since accommodation is limited, family members of

the participants cannot be accommodated.

Certificate

After successful completion of the course the participants would be awarded 'Completion

Certificate'.

Dr. APJ Abdul Kalam Technical University, Lucknow

Prof. Dharmendra SinghDepartment of Mechanical Engineering

ABES Engineering College19th KM Stone, NH-24, Ghaziabad U.P., India

Phone: +91-120-7135112, Fax: +91-120-7135115Email: fdpme@abes.ac.in, pikesh.bansal@abes.ac.in,

manish.saraswat@abes.ac.in, anuj.jain@abes.ac.in

Sponsored byCo-Convener

Prof. (Dr.) Pikesh Bansal Dr. Anuj Kr. Jain Dr. Manish Saraswat

Coordinators

Dr. Rahul SainiMr. Manish MangalMr. VikasMr. Abhishek Pandey

Organizing Commitee

Mr. Shailendra Pratap Mr. Shivam Sharma Mr. Mayank KushwahaMr. Rahul Verma

Address For Correspondence

Mob.: +91-7737447289 Mob.: +91-9354357198Mob.: +91-8920076308

Department of Mechanical Engineering

About ABES Engineering College

ABSE Engineering College is affiliated to Dr. A.P.J. Abdul Kalam Technical University, Uttar

Pradesh, Lucknow. ABES EC was established in year 2000 with the objective of providing

education in Engineering and Management. The programs offered by the institute are

various B.Tech, programs, post-graduation program include M.tech, MBA and MCA. The

institute is NAAC accredited and NBA accredited in almost all branches of Engineering. The

institute has received Star Performance Award for Academic Excellence and Certificate of

Appreciation Award from the AKTU. The institute has various Center of Excellences for

professional development of faculty and students.

About the Department

The Department of Mechanical Engineering established in the year 2003 has a capacity of

180 students in the B. Tech programme and along with M. Tech programme with highly

qualified & experienced faculty members from IITs, NITs & abroad having PhD and research

experience. Department has various center of excellence collaboration with industry

experts. For providing more research exposure department has signed MOUs with BITS,

Vizag; MOUs with University of Perpetual Help, Philippines & ICBM, Dhaka is under

process.

Introduction of Industry 4.0 and Smart Manufacturing

Industry 4.0 is a name given to the current trend of automation and data exchange in

manufacturing technologies. It includes cyber-physical systems, the Internet of things, cloud

computing and cognitive computing. Industry 4.0 is commonly referred to as the fourth

industrial revolution. The characteristics given for the German government's Industry 4.0

strategy are: the strong customization of products under the conditions of highly flexible

(mass) production. The required automation technology is improved by the introduction of

smart manufacturing methods of self-optimization, self-configuration,self-diagnosis,

cognition and intelligent support of workers in their increasingly complex work.

Objective of The Course

This FDP course is designed to offer learners an introduction to Industry 4.0 (or the Industrial Internet), its applications in the business world. Learners will gain deep insights into how smartness is being harnessed from data and appreciate what needs to be done in order to overcome some of the challenges.1. Understand the drivers and enablers of Industry 4.0 along with smart manufacturing

techniques2. Appreciate the smartness in Smart Factories, Smart cities, smart products and smart

Registration Form

Name (in block letters) ______________________________________________

Designation:_______________________________________________________

Organization:______________________________________________________

Mailing Address:____________________________________________________

_________________________________________________________________

Mobile:__________________ Email:____________________________________

Educational Qualifications:_______________

Accommodation in Campus: YES/ No

Signature of Applicant:_____________________

One Week Faculty Development Program

on

ABES Engineering College, Ghaziabad

Signature of Head of the College / Institute (with date & seal)

Note: No registration fee, No TA/ DA will be given to the participants for attending this FDP.

Department of Mechanical Engineering

Industry 4.0 and Smart ManufacturingJune 10 – June 14, 2019

TEQIP-III, Dr. A.P.J. Abdul Kalam Technical University, Lucknow, U.P.

3. Able to outline the various systems used in a manufacturing plant and their role in an Industry 4.0 world

4. Appreciate the power of Cloud Computing in a networked economy 5. Understand the opportunities, challenges brought about by Industry 4.0 and how

organizations and individuals should prepare to reap the benefits

Course ContentsPart 1: Introduction and Essentials

1. Introduction2. Road to Industry 4.0

3. Related Disciplines, System, Technologies for enabling Industry 4.0

4. Additive manufacturing (R) evolution: perspective

Part 2: Role of data, information, knowledge and collaboration in future organizations

1. Business issues in Industry 4.0

2. Opportunities and Challenges

3. Future of Works and Skills for Workers in the Industry 4.0 Era

4. Strategies for competing in an Industry 4.0 world

5. Optimizing Production with Big Data Platforms & Data analytics, AI methods & Analytics

6. Smart & Cost effective manufacturing and automation (Digital manufacturing & 3D printing)

Part 3: Other Applications and Case Studies

1. Industry 4.0 laboratories

2. IIoT case studies

3. Case studies from Industry on smart manufacturing

4. Summary

Venue For Course

Sessions will be held in the Committee Room, Ramanujan Block,ABES Engineering College

Ghaziabad.

Date & Time for Registration

June 10, 2019, 9 AM at Committee Room, Ramanujan Block.

Eligibility

Faculty members of degree level engineering colleges recognized by AICTE.