FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
REPORT ON VIRTUAL BAJASAEINDIA 2016
BAJA SAEINDIA is a national level All Terrain Vehicle Racing Event organised by
SAEINDIA and Mahindra and Mahindra for the college students. The event is conducted in
two phases.
1. Virtual BAJA SAEINDIA – Design and Presentation of All Terrain Vehicle based
on the rule book released by BAJA Organising Committee.
2. Main BAJA SAEINDIA – The selected students from the design presentation
event will be allowed to manufacture their own All Terrain Vehicle and the same
will be tested in NATRAX, Pithampur.
Virtual BAJASAEINDIA 2016 was hosted at Faculty of Engineering, Christ University,
Bengaluru on 24th
and 25th
June 2016.
Day 0:
The event started on 23-06-2016 with a press meet at JW Marriot, Bengaluru where
press people were briefed about the BAJA SAEINDIA 2017.
It began at 12pm and was concluded by 2:30 pm.
Dr. Iven Jose, Dr. GS Hebbar and Mr. Glady Jacob were the representatives of Christ
University who participated in the press conference.
Abhijeet Sanchawat, co-covenor of Virtual BAJA SAE India 2016, P.S. Nitish, convenor of
Virtual BAJA SAEINDIA 2016, Ravi Kharul, convenor of BAJA SAEINDIA 2017 and Dr.
K.C. Vora, director or ARAI Academy along with the student representative of RV college,
winner of BAJA SAEINDIA 2016, Pithampur was present.
The judges meet happened at 6:30 pm. It was held at Block 1 Auditorium of Christ
University Faculty of Engineering, Kengeri Campus.
Dr. K.C. Vora and the other organization committee members briefed the judges and the
other alumni coordinators about the complete programme, which was followed by dinner.
Day : 1
The first day of Virtual BAJASAEINDIA started with an inaugural function which started
with an invocation dance performed by Prof. Prabin and his students.
The inaugural function was followed by lighting of lamp by the dignitaries.
Dr. K C Vora, Director, ARAI Academy, Pune felicitated Fr. Benny Thomas,
Director, Faculty of Engineering, Christ University, Bengaluru with a bouquet. Mr. Ravi
Kharul, Convener, BAJASAEINDIA 2017 felicitated Mr. Munirathnam, Chairman,
SAEINDIA Bengaluru Section with a bouquet. Dr. G S Hebbar, Coordinator, Department of
Mechanical Engineering, Faculty of Engineering, Christ University, Bengaluru felicitated Dr.
K C Vora and Mr. Ravi Kharul with a bouquet. Mr. N. Ram Kumar, Assistant Professor,
Department of Mechanical Engineering, Faculty of Engineering, Christ University,
Bengaluru felicitated Mr. Subodh Y Moyre, Senior Manager, Mahindra India Pvt Ltd,
Mumbai and Mr. Shaan Varma, Co-Convener, BAJA SAEINDIA 2017.
Mr. Ravi Kharul, CTO, Endurance Technologies, Pune graced the occasion with this
welcome address in welcoming the delegates from the host institution and from various
industries. He added that Mahindra BAJA SAEINDIA has been one of the most magnificent
automotive event in the country for the past 10 years.
Fr. Benny Thomas, Director, Faculty of Engineering, Christ University, Bengaluru
graced the occasion with his presidential address and he further explained about the Virtual
BAJA SAEINDIA event to the delegates.
Inauguration of Virtual BAJA SAEINDIA 2016
The inauguration was followed by the design presentation which was held in the classrooms
of Block – II. About 380 teams from Engineering Colleges all over India participated in this
event. The event was conducted two phases:
1. Design Presentation – Held on 24th
and 25th
June 2016.
2. Written Test – Held on 24th
June 2016 from 05:30 to 06:30 PM.
Design Presentation:
The design presentation was judged by the experts from leading core Mechanical
Industries. The event was judged by 70 judges in 20 different panels (3 to 4 judges per panel).
The designs of All Terrain Vehicle were thoroughly scrutinized by the judges under various
categories. Each team was given 20 minutes to present the design of their vehicle. The
presentations were held at Block – 2 Classrooms and Seminar Halls.
About 380 teams from various Engineering colleges all over India participated in this event.
Design Presentation by the Students
Written Test:
The written test was conducted in online mode for the first time since the inception of
BAJA SAEINDIA. The written test was conducted in three different venues.
1. Block – I - Computer Labs.
2. Block – III – Class rooms.
3. Block – IV – Computer Labs.
A total of 1900 students took the online test from 05:30 to 06:30 PM and the results were
declared at 07:00 PM.
The students were tested on the basics of mechanical and automobile engineering.
Day 2:
The design presentation was conducted for the remaining teams in Block – 2 on the last day
from 09:30 AM to 04:00 PM.
The Valedictory function commenced at 05:00 PM.
Dr. Iven Jose, Associate Dean, Faculty of Engineering, Christ University, Bengaluru
felicitated Dr. K C Vora, Director, ARAI Academy with a bouquet. Dr. G S Hebbar, HOD,
Department of Mechanical Engineering, Faculty of Engineering, Christ University,
Bengaluru felicitated Dr. Vinay Mundada with a bouquet.
Dr. Iven Jose and Dr. G S Hebbar felicitated the BAJA Organising Committee
members with a memento. Mr. Ravi Kharul felicitated Dr. G S Hebbar with a memento. Dr.
Sudhir Gupte felicitated Mr. N. Ram Kumar with a memento. Dr. K C Vora, Mr. Subodh
Moyre and Mr. Ravi Kharul felicitated Dr. Iven Jose with a Framed Shield from BAJA
SAEINDIA 2017 team.
Dr. Iven Jose addressed with gathering with his informative speech and he thanked
the BAJA SAEINDIA 2017 team for conducting Virtual BAJA at our campus. He also
thanked the management and the volunteers and faculty coordinators for their tireless efforts
to make the event a grand success.
Mr. Subodh Moyre addressed the gathering by thanking the management of Christ
University for allowing BAJA SAEINDIA 2017 to host Virtual BAJA at the campus. He also
appreciated about the infrastructure of the institution and the other facilities available at the
campus. He was pleased with the hospitality of the students and the faculty members.
Submitted by
Ram Kumar N.