Fall Protection Custom Solutions Catalog - Mine Safety Appliances

Fall Protection Custom Solutions CatalogVolume 2

Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com 2

Table of ContentsCustom Solutions Overview.........................................................................................................................3

Rigid Rail Type Vertical Systems................................................................................................................4Dyna-Glide™ Ladder Climbing System

Flexlible Cable Type Vertical Systems..................................................................................................5–6Sure-Climb™ Ladder Climbing SystemLatchways LadderLatch™ Ladder Climbing System*Latchways ClimbLatch™ Incline Climbing System*

Rigid Rail Type Horizontal Systems............................................................................................................7Sure-Rail™ Horizontal Lifeline

Flexible Cable Type Horizontal Systems.............................................................................................8–10Sure-Line™ Horizontal LifelineHorizon™ Horizontal LifelineLatchways ManSafe Horizontal Lifeline*Latchways Single Span™ Horizontal Lifeline*

Rigid Rail Type Roof Mounted Systems.............................................................................................11–12Saferidge™ System*Safetraxx™ System*

Flexible Cable Type Roof Mounted Systems ..........................................................................................13Latchways Constant Force™ Anchor

Freestanding Anchor Type Roof Mounted Systems ..............................................................................14Latchways Freestanding Constant Force Anchor*

D-Ring Type Single Point Anchors ...........................................................................................................15Latchways Heavy Duty D-ring*

Removable Type Single Point Anchors....................................................................................................15Latchways Push-Lock™ Single Point Anchor*

Training..........................................................................................................................................................16

Express warranty

MSA warrants that the MSA components furnished by our Custom Solutions installers are free from defects or faulty workmanship for a period of one (1) year from dateof first use, or eighteen (18) months from date of shipment, whichever comes first, provided they are maintained and used in accordance with MSA user instructionsand/or recommendations. MSA shall be released from all obligations under this warranty in the event repairs or modifications are made by persons other that its ownauthorized service personnel or if the warranty claim results from misuse of the product. No agent, employee or representative of MSA may bind MSA to any affirmation,representation or modification of the warranty concerning components or accessories not manufactured by MSA, but will pass on to the Purchaser all warranties ofmanufacturers of such components. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY, AND IS STRICTLY LIMITED TOTHE TERMS HEREOF. MSA SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For additional information,please contact the Customer Service Department at 1-800-672-2222.

*These products are available through MSA Systems Integrators and are not available direct from MSA.

Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com

MSA Custom Solutions

3

MSA Custom SolutionsEvery business is unique, and MSA recognizesthat YOUR Fall Protection systems need to be custom-designed and installed to meet YOUR needs.

To help you, we have carefully selected andtrained specially qualified contractors, who can personally work with YOU to deliver exactly the services your hazardous situations demand.

These MSA Fall Protection System Integratorsare independent organizations throughout North America whose local specialists canprovide one or more customized MSA FallProtection solutions for your business. Your MSA System Integrators will combine their experience and knowledge of practicalapplications with MSA Fall Protection productsto meet your specific needs for any industry,including forestry, construction, oil & gas,petrochemical, mining, manufacturing, utilities,entertainment, and transportation.

Whether you choose complete turnkey services or individual services, you'll receive experienced application and design, fabrication, and installation of whatever MSA Fall Protection systems you need.

• You get the broadest product range, to ensure the bestpossible fall hazard solution for your specific application.

• MSA System Integrators work directly for you and areresponsive to your project requirements.

• MSA System Integrators offer cost-effective servicesdirect to you, the MSA customer.

• You will benefit from dedicated regional SystemIntegrators as well as nationally prominent organizationsthat specialize in particular industry applications.

Engineering ServicesRegistered professional engineers will visit yoursite to analyze and determine the scope of work.Then they will design and draft engineeringdrawings, and later, follow up with a constructionsite review to ensure that your Fall Protectionsystem has been installed as designed.

InstallationFactory-trained and certified installationtechnicians will execute the design specificationsand carry out the manufacturer's instructions.Technicians can also inspect and re-certify anexisting MSA Fall Protection system.

FabricationKnowledgeable fabricators will build all structuralcomponents that are required to support your primary MSA Fall Protection system, fromsimply connecting brackets that attach to yourbuilding columns or beams, to assembling completefree-standing support structures. You can trust thatyour fabricated components will comply with allapplicable governing codes and standards.

TrainingHigh quality training programs at a reasonable costwill be tailored to the unique issues of your industryand installation. MSA's commitment to increasingdemands for technical training in Fall Protection,post-fall retrieval, and rescue will be fulfilled at your facility.

It's easy! To receive your quotation from MSA CUSTOM SOLUTIONS:1. Contact your local MSA distributor, MSA Sales Associate,

or call our MSA Customer Service at 1-800-672-2222.2. Your request will be forwarded to the MSA System Integrator,

who will contact you about your project's specific requirements.3. You will receive a written estimate for your system.

For more information call MSA Customer Service Center at 1-800-672-2222 and request the Custom Solutions Catalog (Bulletin #2300-100).

Why Choose MSA Custom Solutions?

How?


Vertical SystemsRigid Rail Vertical Systems

Dyna-Glide® Climbing Protection System

What is the Dyna-Glide Climbing Protection System?The Dyna-Glide Climbing Protection Systems are used to prevent and/or arrestfalls from heights and also enhance the way a climber is able to perform thenecessary work. Our systems can be mounted to already-installed ladders, tocorners of lattice towers, and to almost any other suit ably strong structure yourcrew needs to climb. Systems can also be constructed to continuously protectclimbers—whether they’re traveling vertically, horizontally, or around curves,corners or obstacles.

Why use the Dyna-Glide Climbing Protection System?Whatever configuration works for you, the Dyna-Glide System:• Limits total fall distance to inches• Offers components for complete rescue systems• Allows for vertical and horizontal mobility• Uses galvanized or stainless steel for corrosion resistance• Offers your choice of Ladder Rail Combination (LRC) or Rail only• Provides smooth travel – there’s no binding of the fall arrester inside the rail• Rails are available in straight or curved sections – enough choices to fit almost

any size or shape of structure• Offers many different configurations – plus all of the accessories and mounting

brackets to fit virtually any application• Eliminates concern of system slippage found in frictional design systems—

all because of our mechanical fall arrester design• Offers product life of 20+ years• Optional fixed ladder section meeting OSHA and ANSI A 14.3 standards with an

in te gral rail mounted in the center of the ladder (Ladder Rail Combination)• Offers sufficient foot-clearance on either side of rail for easy climbing (Integral

rail of Ladder Rail Combination)• Reduces stress, and prevents damage, to structure during climbing operations• Orients fallen worker in upright position, face towards climbing structure• Uses detachable, lightweight, stainless steel and aluminum mechanism for

hands-free ascent and descent• Shows a decade-plus track record of performing in some of the most severe

weather conditions in the world• Can be used by more than one worker at a time• Is CSA certified

Tak en together, the Dyna-Glide System is designed to be installed without modi-fication to the structure and can be assembled with simple hand tools.

For more information concerning the Dyna-Glide System contact our CustomerService Center at 1-800-672-2222 and ask for the Dyna-Glide Catalog, Bulletin No.2300-22-MC.

We offer Field Rig ging Crews so you’ll have the manpower needed to get the jobdone. Or, if you prefer, we have As Built Documentation for every aspect of theproduct. We also offer full training by a “competent” person—either at our training facility or on your job site. Please call 1-800-672-2222 and let us help youspecify the system that will meet your needs.

LRC Combination• Rungs incorporate skid-resistant

surface• Can be curved or bent

for your specific application• Constructed of galvanized steel• Standard length: 7’ 4-3/16”• Standard width: 18”

Fall Arrester• Mechanical locking mech a nism

to reduce fall distance• Permits hands-free ascent

and descent• Constructed of aluminum

and stainless steel• Carabiner not included


Vertical Systems

5

Flexible Cable Vertical Systems

Sure-Climb™ Permanent Cable SystemThe Sure-Climb Permanent Ladder Cable System is designed to provide fall protection when climbing or descending ladders or vertical structures up to 300’ in height. Applications include telecommunications towers, light poles, water towers, hydroelectric towers, stacks, and any other climbable structure. The Sure-Climb permanent system:• Includes energy-absorbing, galvanized steel top and bottom mounting brackets• Uses a 5/16” galvanized steel cable• Incorporates cable guides to minimize cable vibration and wear• Uses a stainless steel fall arrester (ordered separately)• Meets all applicable OSHA regulations and ANSI standards• CSA certified

Sure-Climb Slider can be attached and removed anywhere

along the length of cable

Step 1

Step 2

Step 3

U-Bolt WireRope Clips

Turn buck le

Cable AnchorBracket

Cable Anchor Bracket

Safety AnchorShackle

Cable Guide

All Sure-Climb systemsinclude: anchor bracket,anchor shackle, cableguides, wire rope clips,turnbuckle, and cable.

Fall Arrester must beordered separately.

Extension Davit & BaseAssembly

Cable AnchorBracket

Please call 1-800-672-2222 and let us help you specify the system that will meet your needs.


Vertical SystemsLatchways Ladderlatch™ Permanent Cable SystemThe Latchways LadderLatch™ Permanent Cable Systems are designed to provide fall protection when climbing or descending ladders or vertical structures. The flexibility of the design allows a system to beinstalled so that it follows the contours of the structure, including horizontal and inclined sections. The variety of mounting brackets allow for quick and easy installation to almost any type of structure. This allows the system to be installed by your own personnel; however, installation services are available from MSA upon request. Other features of the LadderLatch system include:• Lifeline that will support up to 4 workers • LadderLatch fall arrester that can be attached or detached at any point on the cable• Wide variety of mounting brackets available• Top anchor extension assembly to extend lifeline approximately 4 ft above ladder• Cable guides to reduce cable vibration and wear• Line tensioning device with proper line tension indicator• System components made of stainless steel• Meets applicable OSHA regulations and ANSI standards• CSA certified

Top Anchor Extension Assembly with

V-Xtenda Shock Absorber

Top Anchor Mounting Brackets

Wire Guide Assembly

Bottom Anchor Assembly

Wire Guide MountingBracket

LadderLatch unit

Attachment/detachment from system achievedby depressing release catch, pulling awaystarwheel and inserting/removing cable to/fromaccess position.

Brackets are designed to clamp onto most typesof industrial ladders.

Installation, operation, and maintenance shouldbe in ac cor dance with Latchways rec om men da -tions.

Cable

Wire Guide

Bottom Anchor Bracket

Latchways LadderLatch in use

Latchways ClimbLatch™

The ClimbLatch system is designed to permit travel at 15 to 90 degrees of incline, protecting theuser from a sliding fall on a sloped surface. The ClimbLatch system uses many of the same com-ponents as the Latchways ManSafe system, with the specially designed ClimbLatch fall arrester.Compatibility among components ensures a system that is designed for smooth, continuous tran-sitions from horizontal to inclined travel.

• ClimbLatch fall arrester permits hands-free travel up the sloped surface, freeing the worker to use both hands for work or for climbing

• Systems can be designed to accommodate up to 4 workers• Built-in energy absorbers protect end anchors

and structures from excessive loads should a fall occur on the system

• Meets applicable OSHA regulations

• Is certified to EN and CSA standards

Latchways ClimbLatch in use


*This product is available through MSA Systems Integrators and is not available direct from MSA.


Horizontal Systems

7

Sure-Rail Trolley

The Sure-Rail horizontal railsystem is installed byattachment to intermediatesupport members that act tostabilize the rail during normalflex and movement of thebuilding structure. Theintermediate supports arefabricated from hollowstructural shapes (HSS). TheHSS supports are connected to the rail by welded tabs at five-foot (1.5 m) intervals. Thedesign of the HSS supports arethe responsibility of a qualifiedengineer familiar with theproject and manufacturer'srequirements.

Sure-Rail is an engineeredsystem and must be designed,installed and used under thesupervision of a qualifiedstructural engineer, as requiredby US Federal OSHA andCanadian Provincial regulations.

Sure-Rail Trolley

Carabiner

20’ Cable Dyna-Lock SRL

Sure-Rail System

Sure-Rail Bolt

Sure-Rail Spacer

Sure-Rail Splice

Sure-Rail Anti-Slip off Collar

Sure-Rail

Sure-Rail Bolt

Top View

Side View


Sure-Rail Trolley


Rigid Rail Horizontal SystemsSure-Rail™ Horizontal Lifeline*The Sure-Rail system is a rigid rail horizontal lifeline system typically used in areas when there is limited clearancebelow the working surface. The system consists of galvanized steel ½” x 2” x 10’ rail sections, a rail trolley, endstops, and various mounting hardware. The rails are anchored to a supporting structure, while the trolley provides amobile connection point for the user. The rail sections are affixed to an approved anchorage at 5 ft intervals. End-stops prevent accidental detachment of the trolley from the rail.

The Sure-Rail system is available in many standard configurations, but can also be customized to fit yourapplication. For example, a swing arm option can be installed that allows the system to retract against a wall whennot in use with the assistance of pneumatic cylinders (Possible interference that would require this option, would bean overhead crane moving in a perpendicular direction to the fall protection system).

In addition, the Sure-Rail system provides:• Ease of movement (smooth trolley action)• Little or no deflection in the rail limits fall distance and fall arrest forces on the body• Even distribution of fall arrest forces to the structure • Twin track configuration that allows users to bypass each other without having to disconnect

and re-connect• Spring loaded end –stops for easy insertion/removal of the trolley• Aluminum trolley with stainless steel wheels• Bent rails available for travel around corners• Support for up to 4 workers on the system simultaneously. (Additional capacity can be added.)• Meets all applicable OSHA regulations


Horizontal SystemsFlexible Cable Horizontal SystemsSure-Line™ Hor i zon tal LifelineThe Sure-Line temporary Horizontal Lifeline is a lightweight cable system that is suspended between two approved anchor points to provide workerfall protection during horizontal movement. Designed for quick and easy installation at temporary or permanent work sites, the Sure-Line system:• Includes an integral shock absorber• Available in lengths up to 200 ft (60 m)• Uses a 3/8”, 6X36 galvanized cable• Meets all applicable OSHA regulations

• Available in 2 models, with or without turn buck le• Rated for up to 2 people• Incorporates a combination clamp/thimble that allows for effortless tensioning of lifeline

Sure-Line Iron Worker Cable System

Sure-Line Steel Cable System

Horizon® Hor i zon tal LifelineThe MSA Horizon Horizontal Lifeline anchorage connecting system is designed for port a bil i ty, versatility, ease of installation and ease of use. The system may be mounted to existing overhead steelbeams or to newly constructed steel structure where overhead an chor age points are not available.Hor i zon tal travel through intermediate supports is achieved without disconnection of the work er’s per son al fall arrest system. The system may ac com mo date up to five persons. The unique shockabsorber reduces dy nam ic forces trans mit ted to the an chor age points. Stanchion system may beinstalled on the top or bottom flange of an I-beam. Typical ap pli ca tions include new construction (steelerection), in spec tion and main te nance op er a tions, loading bays, bridges, overpasses, aircraft hangars,man u fac tur ing, pet ro chem i cal, chemical and food pro cess ing plants. Meets OSHA requirements.

Basic Below Beam Mount Sub-System

HLL Shock Absorber with Turnbuckle

Lifeline 3/8” Wire Rope Bypass

Turnbuckle with PlateOptional - recommended forlengths over 50’

Open Wedge Socket withWire Rope Clip

I-Beam

Beamgrip

End Fitting

! WARNING

OSHA regulations state “Horizontal Life line Systems shall be designed, installed and used un der su per vi sionof a qual i fied person, as part of a complete fall ar rest system, which main tains a safe ty fac tor of at leasttwo.” A qualified person is de fined as “one with a rec og nized degree or professional certificate and/or extensive knowl edge and ex pe ri encein the sub ject field, who is capable of de sign, analysis, evaluation andspecifications in the sub ject work,project or prod uct.” MSA can providea qual i fied per son to design and install a Horizontal Lifeline System.Con tact the MSA En gi neer ing Service De part ment.



Horizontal Systems

9

Latchways Mansafe® Horizontal LifelineThe Latchways ManSafe® Horizontal Lifeline systems are designed to operate horizontally, around corners, and upor down inclines to offer continuous worker protection regardless of the building type or structure. ManSafeHorizontal Lifeline features include:• Unsurpassed system flexibility• Ability to support up to 6 workers per lifeline• Unique Latchways Transfastener rotates freely through intermediate supports to enable

hands-free operation• Transfastener can be removed/installed at any point along the lifeline• Integral shock absorber limits fall arrest forces• Stainless steel components for durability• 8mm, 7 x 7 stainless steel cable• Mounting hardware to install the system to almost any type of structure

As an authorized Latchways installer, MSA can provide the fall hazard analysis, engineering services, customproduct fabrication, system installation, system certification, and training necessary to make your fall protectionprogram a success.

Each Latchways Mansafe system must be individually designed to meet your specific application. The LatchwaysHorizontal Lifeline systems can only be installed by Latchways trained and certified professionals.

Transfastener engages first leg of hanger.The starwheels start to rotate backwards,allowing the slipper to slide along the wirebetween hangar legs.

Transfastener moves forward and thestarwheels continue to rotate while re-maining in contact with the slipper whichis passing through hanger loops.

Transfastener clears the second leg ofhanger and continues forward with slip-per still sliding along the wire.

With its unique starwheeldesign, the Transfastenerfreely rotates throughintermediate cable supporthangers and will travelsmoothly along straight orcurved runs as well asthrough internal and externalcorners of up to 180 degrees.

Please call 1-800-672-2222 and let us help you specify the system that will meet your needs.*This product is available through MSA Systems Integrators and is not available direct from MSA.


Horizontal Systems

Single Span Energy Absorber

Mobile Anchorage Trolley

Line Tensioning Device and D-ring

Typical use of Single Span OverheadSystem for rail car maintenance.

Typical use of Single Span OverheadSystem for internal factory roof mainte-nance.

Up to 200 ft maximum span

A. Single Span Energy Absorber

B. Overhead System Mobile Anchorage

C. Overhead System Intermediate Bracket

D. Line Tensioning Device and D-ring


A

B

C

D


Latchways Single Span™ *The Single Span system incorporates Latchways Constant Force technology in the in-line energyabsorber. Technical performance of the unit ensures that:• Load is kept to a maximum of 4,050 lbf in the event of a fall• Load is the same whether 1, 2 or 3 workers fall - 4,050 lbf• Unit will deploy only when a load of 4,050 lbf is experienced• Unit has a working deployment of 4,050 lbf and a minimum design strength of 8,100 lbf

- a safety factor of 2:1• Cable lifeline can be tensioned to 1,124 lbf, eliminating sag and any whiplash effect should a worker fall

The Single Span:• Allows for continuous span lengths of up to 200 feet,

reducing the quantity of costly intermediate supports• Installs quicker, easier and less costly than I-beam systems• Easily accommodates change of direction• Incorporates all stainless steel cable and components• Meets applicable OSHA regulations• Is certified to EN standards


Roof-Mounted Systems

11

SafeRidge section with traveling eyebolt and endstop.

Rigid Rail Roof-Mounted SystemsSaferidge™ System*The patented SafeRidge system is designed to provide fall protection onsloped roofs. This unique product combines a fall protection system with thewaterproof and venting characteristics of a traditional roof ridge section. Itslow profile and unobtrusive appearance can accommodate a wide variety ofroof profiles. Advantages of the SafeRidge system are:• Can be installed on new or existing buildings• Installs quickly and easily• Can be installed by your personnel• Fastened from the top down – no need to enter building for installation• No penetration of the insulation within the roof• Cost-effective – provides a safety system and apex weather proofing

in one product• Offered in a range of colors to match or accent the color of the roof• Standard width of 15-3/4” (400mm), additional widths available• Aluminum and stainless steel mobile eyebolt for connection

of fall protection system• Accommodates up to 4 workers per system• Optional vented SafeRidge rail available

A complete system consists of the saferidge section,endstops, traveling eyebolt, a full body harness, anda rope grab.

Saferidge is an engineered system must bedesigned, installed and used under the supervisionof a qualified structural engineer, as required by USFederal OSHA and Canadian Provincial regulations.

Please call 1-800-672-2222 to let us help youspecify the proper kit to meet your needs.


SafeRidge sections are available in aluminum or steel, Standard (400mm) or Wide (590 mm) width, and a variety of colors.


Roof-Mounted SystemsSafeTraxx™*The SafeTraxx system is a roof-mounted fall protection systemdesigned to be installed on sloping, pitched roofs in the off-ridgelocation. Safetraxx consists of 6 foot 7 inch (2.0 m) long sections ofextruded aluminum track that incorporates a precision sliding jointfor easy installation and continuous, uninterrupted travel.

The Safetraxx Traveling Eyebolt is a mobile anchorage connectorthat rides smoothly, hands-free, along the track sections. Theeyebolt pivots to either side of the axis of travel, permitting work oneither side of the track.

Additional features include:• Systems can support multiple workers simultaneously• End stops are provided to prevent the accidental detachment of

the Traveling Eyebolt• Traveling eyebolt can be removed

from the Safetraxx system when not in use• Sections can be installed on a variety of roof profiles

and can be bolted or riveted to the roof skin. • Installation process does not penetrate

the insulation within the roof • System is fastened from the top down,

eliminating the need to enter the premises or to erect internal scaffolding during installation

• System can be color matched to your roof to provide anelegant solution which has minimum impact on the aesthetics of the Architects' designs

• Meets all applicable OSHA regulations and is CEapproved and certified to EN795 Class D.

The Safetraxx system comes complete with allcomponents required for installation, including fasteners.The fastening arrangement utilizes a rivet with washerthat prevents moisture from entering the roof structure.Clamps are provided for attachment to standing-seamroof profiles. Installation can be handled by a competentroof contractor's own labor, using tools normallyassociated with roof decking.

Safetraxx is adaptable to most roof types.

Safetraxx can be installed on a variety of roof locations.




Roof-Mounted Systems

13

Flexible Cable Roof-Mounted SystemsLatchways Constant Force™ System for Roof Mounting*The Constant Force system employs a mechanism to provide aconsistent way of absorbing mechanical energy and controllingtension within the system to a pre-determined constant force. Inthe event of a fall, the Constant Force Posts deploy to absorbenergy (limits the load to 2250 pounds force (10 kN)), leaving theroof panel intact. The Constant Force system is designed for use onmost common roof types incuding:• standing seam roof (attached using clamp)• composite roof

(attached using weather tight screws)• built-up on-site roof

(attached using weather tight screws)• single-ply membrane roof

(attached using toggle bolts)

Additional features of the Constant Force system:• can be located anywhere on the roof • does not need to be attached to structural steel or purlins,

avoiding costly and potentially damaging roof penetrations

• can be used in both fall arrest and fall restraint systems

• can be powder coated or color matched to your roof profile

• design is smaller and more unobtrusive than other brackets

• blends with overall building design, maintaining architecturalintegrity

• Meets applicable OSHA regulations and is CE approved andcertified to EN 795.

Constant Force post on standing seam roof Constant Force post on composite roof

Constant Force post on built up on site roof Constant Force post on single ply membrane roof

Fixing Method:Four split clamps

Fixing Method:Sixteen stitching screws

Fixing Method:Sixteen stitching screws

Fixing Method:Four toggle bolts

Please call 1-800-672-2222 and let us help you specify the system that will meet your needs.*This product is available through MSA Systems Integrators and is not available direct from MSA.


Roof-Mounted SystemsFreestanding Anchor Roof Mounted SystemLatchways ManSafe Freestanding Constant Force PostThe Freestanding Constant Force Post provides stability, versatility, and mobility, all in one easy to install stachion. • Does not attach to the working surface, limiting the possiblity of damage to

surface in the event of a fall • Due to its modular design, the installer will never have to lift

more than 55 lbs (25 kg) at any given time• Used on nominally flat roofs up to a maximum pitch of 5 degrees• Tested and approved for use on concrete, single ply membrane,

asphalt-sanded, asphalt-stone chipped, and steel roof profiles• Interlocking segments are arranged in a circular form,

ensuring that the post is omni-directional• Meets EN 795 Class E

The freestanding post is supplied in component part form and requires assemblybefore the device can be used. Different models are available depending uponyour particular needs.• 880 lb (400 kg) post is for use as a single point anchor

or as the end posts within a horizontal cable system • 660 lb (300 kg) post is for use only

as a single point anchor• 440 lb (200 kg) post is for use only

as an intermediate anchor within a horizontal cable system • 220 lb (100 kg) upgrade kit converts the 660 lb (300 kg) post

to a 880 lb (400 kg) post

This image shows the Freestanding Constant Force post on a cutaway section of a Bituminous Concrete Deck roof profile.

10.4 in.(265 mm)

5.9 in.(150 mm)

Base plate dimensions39.4 in. (1000 mm)

11.4 in.(290 mm)

6.9 in.(175 mm)

12.3 in.(313 mm)

880 lbs.(400 kg) post

6.9 in.(175 mm)



Freestanding Constant Force Post Component Details

For more information about the ManSafe Freestanding ConstantForce Post, contact the MSA Customer Service Center at 1-800-672-2222 and ask for bulletins #2300-74, #2300-75, #2301-59.


Anchorage Connectors

15

Removeable Single Point Anchor

Latchways PushLock™ Eyebolt*The PushLock safety eyebolt offers a removable and unobtrusive solution to unsightly eyebolts. It isused in building structures to allow safe access for window cleaning and exterior maintenance. The pushlock Eyebolt consists of two components, a socket and an eyebolt. The socket remains inthe wall and has a low visual-impact cover that is available in stainless steel or brass (or it can becolor matched to the building design). A worker using the system carries the removable eyeboltwhich is inserted into the socket for anchorage connection.

Sockets are available for installation into a variety of materials, including:• brick• masonry• concrete• steel

Other features include:• All stainless steel construction• Resists a 5,000 pound force in any direction of loading• Suitable as a single-point anchorage connector for one worker weighing up to 400 pounds• The eyebolt requires two, separate and distinct hand motions to guard against accidental

disengagement• Meets all applicable OSHA regulations and is CE approved and certified to EN795

D-Ring Single Point Anchor

Latchways Heavy Duty D-RingThe Latchways Heavy Duty D-Ring is designed for attachment of onepersonal fall arrest system with a capacity of up to 400 pounds. It isrecommended for permanent, outdoor installations where prolongedweathering and exposure to adverse environments demands a high-tensile, corrosion-resistant steel anchorage connector. It is alsosuitable as an end-anchor for engineered horizontal lifeline systems.

Other features include:• constructed of Stainless Steel Grade 316S

(electro polished)• Minimum breaking strength is 10,000 lbs force (45 kN)• Meets all applicable OSHA regulations

and is certified to EN795.

4 in. (102.2 mm)

2.4 in. (60.4 mm)

1.8 in. (45.5 mm)

2.8 in. (71.7 mm)

Heavy Duty D-ring retained by shank andhead of bolt. (Bolt not included)


Note: This Bulletin contains only a general description of the productsshown. While uses and performancecapabilities are described, under nocircumstances shall the products be used by untrained or unqualifiedindividuals and not until the product instructions including any warnings or cautions provided have been thoroughly read and understood. Only they contain the complete and detailed information concerningproper use and care of these products.

ID 2300-100-MC / Apr 2008© MSA 2008 Printed in U.S.A.

Corporate HeadquartersP.O. Box 426, Pittsburgh, PA 15230 USAPhone 412-967-3000www.MSAnet.com

U.S. Customer Service CenterPhone 1-800-MSA-2222Fax 1-800-967-0398

MSA CanadaPhone 416-620-4225Fax 416-620-9697

MSA Mexico Phone (52) 55 2122 5770Fax (52) 55 5359 4330

MSA International Phone 412-967-3354 FAX 412-967-3451

Offices and representatives worldwideFor further information:

MSA training courses are compliant to the new ANSI Z359-2007 family of fallprotection standards and meet "ANSI Z490.1 2001 Criteria for AcceptedPractices in Safety, Health, and Environmental Training."

Custom Training CoursesMSA has designed many types of custom training courses and interactive training pro gramsfor a wide range of industries including:• Mining Industry• Utilities Industry• Automotive Industry• Telecommunications Industry• Railroad Industry

MSA also offers the following Fall Protection training courses:Fundamentals of Safety At Heights

Competent Person for Equipment Inspection

Safe ty At Heights Program Management & Rescue Planning

Competent Person for Safety At Heights

Industrial Rescue

Tower Climbing Safety & Rescue

Confined Space Entry and Retrieval

Fall Protection & Rescue for Railway Bridges

With MSA, you have the experts to help you find the best solution for your Safety At Heightstraining needs.

ExpertsLearn from the

Reg is tra tion InformationWe invite you to attend our next training session, which will prove to be acomprehensive and valu able ex pe ri ence. For reg is tra tion information, please contact the MSA Customer Service Center by phone (1-800-672-2222)or by fax (1-800-967-0398), or log onto our web site at www.MSAnet.com.

LET US TRAIN YOU

AT YOUR FACILITY!

HANDS-ONCOMPREHENSIVECOURSES

Date post:	12-Sep-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Fall Protection Custom Solutions Catalog - Mine Safety Appliances

Documents