96KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102

Email: hq@kepcopower.com • www.kepcopower.com/jbw.htm

The Family of JBW Models30 Watt

15 Watt

10 Watt

FEATURED PRODUCT - SERIES JBW

OUTPUT SETTING OVP OUTPUT CURRENT SW RIPPLE NOISE EFFICIENCY (%)(3) LOADTOLERANCE SETTING CURRENT LIMIT CAPACITANCE(4)

MODEL Volts (Volts)(5) (Amps)(1) (Amps)(2) (mV p-p) (mV p-p) 100V a-c 240V a-c

10 WATT MODELS

JBW 03-2R0 3.3 ±0.25V 3.75 2 2.5 80 120 69 69 10000µF

JBW 05-2R0 5 ±0.25V 5.75 2 2.5 80 120 71 71 10000µF

JBW 12-0R9 12 ±0.6V 13.8 0.9 1.12 120 150 78 79 5000µF

JBW 15-0R7 15 ±0.75V 17.25 0.7 0.87 120 150 79 80 4000µF

JBW 24-0R5 24 ±1.2V 27.6 0.5 0.62 120 150 82 83 2000µF

15 WATT MODELS

JBW 05-3R0 5 ±0.25V 5.75 3 3.15 80 120 72 72 10000µF

JBW 12-1R3 12 ±0.6V 13.8 1.3 1.37 120 150 74 74 5000µF

JBW 15-1R0 15 ±0.75V 17.25 1 1.05 120 150 74 74 4000µF

JBW 24-0R7 24 ±1.2V 27.6 0.7 0.74 120 150 76 76 2000µF

30 WATT MODELS

JBW 05-6R0 5 ±0.25V 5.6 6 6.3 80 120 75 77 10000µF

JBW 12-2R5 12 ±0.6V 13.3 2.5 2.7 120 150 78 79 5200µF

JBW 15-2R0 15 ±0.75V 16.6 2 2.1 120 150 79 80 4000µF

JBW 24-1R3 24 ±1.2V 26.5 1.3 1.4 120 150 80 81 1000µF

(1) Still air rating -10 to +50°C. Derate 30% at 60°C. Consult factory for increased ratings with moving air.(2) Minimum, consult factory.(3) Typical.(4) Acceptable added output capacitance, max.(5) Overvoltage protection for the 10 and 15W models comprises a zener diode across the output to limit voltage.

Overvoltage in the 30W models is provided by a shut-down circuit.

JBW MODEL TABLE

A N I S O 9 0 0 1 C O M P A N Y

97KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102

Email: hq@kepcopower.com • www.kepcopower.com/jbw.htm

The Kepco/TDK JBW series are comprisedof three groups of affordable powersupplies: 10W, 15W and 30W in a PC-card style. They offer fixed output voltagesfrom 3.3V d-c to 24V d-c for space andcost sensitive OEMs. They operate fromany a-c mains in the range 85-265V a-c ora d-c input in the range 110-370V d-c.

JBW are fitted with input filters thatsuppress conducted emissions below therequirements of FCC Class B, VCCI B,EN55011-B and EN55022-B. A flybackconverter is used for high efficiencyapproaching 80 percent. The low profile andsmall footprint of the JBW power supplieswill allow them to fit into tight quarters.

JBW are recognized to UL 1950-3, CSA22.2No. 950-95 and EN60950 . They bearthe CE mark for use in the EuropeanCommunity. JBW are ideal for cost sensitiveOEM applications that require a qualitysmall power supply with all international andsafety certifications.

JBW are CE marked per the Low VoltageDirective (LVD), EN60950.

SPECIFICATION 10 WATT MODELS 15 WATT MODELS 30 WATT MODELS CONDITION

Source max 0.40% 85-265V a-cEffect

Load max 0.80% 0-100% loadEffect

Temperature max 1% 2% -10 to +50°CEffect

Time Effect max 0.40% 0.5-8 hours

Transient excursion ±4% 50-100% load, Recovery >50µsec rise

-10 to 50°C

Start Up 100V a-c 700msec max, 200msec max, 650msec max, See note (1)Time 200msec typ 25msec typ 350msec typ

240V a-c 700msec max, 100msec max, 320msec max, See note (2)200msec typ 25msec typ 130msec typ

JBW OUTPUT CHARACTERISTICS

(1) The 15W size, 15V and 24V models: 200msec max, 40msec typ for 100V a-c input.(2) The 15W size, 15V and 24V models: 100msec max, 40msec typ for 240V a-c input.

JBW INPUT / OUTPUT CABLE KITS

JBW INPUT / OUTPUT CONNECTORS

JST: Japan Solderless Terminal Mfg. Co., Ltd.LCE: Long Chu Electronics Co., Ltd.

MFRS.

JSTLCE

JSTLCE

JSTLCE

JSTLCE

POWERSUPPLY END

B3P5-VH-BP101-05-2/4

B4B-XH-2P221-04

B3P5-VH-BP101-05-2/4

B4B-VH-BP101-04

SOCKETHOUSING

VHR-5NH101-05

XHP-4H221-04

VHR-5NH101-05

VHR-4NH101-04

TERMINALPIN

SVH-21T-P1.1T101

SXH-001T-P0.6T221-01

SVH-21T-P1.1T101

SVH-21T-P1.1T101

Input

Output

Input

Output

For 10W and 15W Models – Kit 219-0406For 30W Models – Kit 219-0408

For 10W and 15W Models

For 30W Models

JBW INPUT CHARACTERISTICS

a-cVoltage

d-cVoltage

Frequency

EMI

Current

LeakageCurrent

HoldupTime

SurgeCurrent

PowerFactor

SwitchingFrequency

Input Fuse

100-240V a-c

85-265V a-c

110-370V d-cNote: safety recognition for a-c only

47-440Hz

FCC Class BVCCI-B

EN55011-BEN55022-B

at 60Hz

0-100% load,-10 to +60°C

0.6 typ0.45 typ

2A/250V a-c

0.75mA max0.1mA typ

0.75mA max0.15mA typ

15msec typ

140msec typ

20A max15A typ

40A max30A typ

0.25A typ

0.15A typ

0.36A typ

0.20A typ

0.65A typ

0.35A typ

100KHztyp

Variablewith load

66KHztyp

0.75mA max0.2mA typ

0.75mA max0.3mA typ

13msec typ

150msec typ

19.5A max15A typ

41A max30A typ

0.75mA max0.35mA typ

0.75mA max0.35mA typ

20msec typ

160msec typ

30A max15A typ

60A max30A typ

SPECIFICATION 10 WATT MODELS 15 WATT MODELS 30 WATT MODELS CONDITION

nom

range

range

range

100V a-c

240V a-c

conducted

100V a-c

240V a-c

100V a-c

240V a-c

100V a-c

240V a-c

100V a-c240V a-c

FIGURE 1 Output Power

vs.Ambient Temperature

0-20°C -10°C 50°C

70%

100%

START-UP

60°C

JBW can be combined into a custom powerassembly for multi-output requirements.Please see pages 131-135 fordetails on Kepco’s Power AssemblyProgram.

98KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102

Email: hq@kepcopower.com • www.kepcopower.com/jbw.htm

A N I S O 9 0 0 1 C O M P A N Y

SPECIFICATION RATING/DESCRIPTION CONDITION

Temperature Operating -10 to +60°C (1)

Start up -20 to +60°C

Storage -30 to +75°C

Humidity 20 to 90% RH Wet bulb temperature <35°C

Vibration 5-10Hz 10mm amplitude Sweep time 10 min.

10-200Hz 19.6 m/s2 1 hr ea axis (2)

(2g) acceleration

Shock Acceleration 588 m/s2 (60g) 3 shocks ea axis (2)

1/2 sine pulse

Duration 11 ±5 msec

Incoming input-input 2kV pulse, 1µs Normal operation(50Ω termination)Noise

input-ground 2kV pulse, 1µs 50-60Hz(3)

Surge input-input 3kV pulse, 100Ω internal 1.2 x 50µsec series resistor (3)Withstand

input-ground

Immunity from 10kV from charged Ground potential area-groundElectrostatic Discharge capacitorC=500 pF,

100Ω series res

Safety Standards UL1950-3; Ambient CSA22.2 No. 950-95; temperature

EN60950 50°C max.a-c input only

Conducted EMI FCC Class B, VCCI-B;EN55011-B; EN55022-B

Withstand input-output a-c 3000V, Voltage 1min (cutout 10mA)

input-ground a-c 2000V, 5-35°C, 45-85% RH1min (cutout 10mA)

output-ground a-c 500V, 1min (cutout 10mA)

Insulation input-outputResistance input-ground >100 MΩ (d-c 500V) 5-35°C, 45-85% RH

output-ground

Dimensions 10W English 0.83" x 1.42" x 3.74"

10W Metric 21mm x 36mm x 95mm

See outline15W English 0.89" x 1.97" x 3.74" drawings15W Metric 22.6mm x 50mm x 95mm

30W English 1.02" x 2.17" x 4.80"

30W Metric 26mm x 50mm x 122mm

Cooling Natural convection

JBW GENERAL/ENVIRONMENTAL SPECIFICATIONS

1) Full output power in still air to +50°C. Derate 30% for still air operation to +60°C.Consult factory for power ratings with moving air.

(2) Non-operating.(3) Operating.

OUTLINE DIMENSIONAL DRAWINGSFractional dimensions in light face type are in inches,dimensions in bold face type are in millimeters.

10W JBW

15W JBW

30W JBW

Mount on 8mm (minimum) standoffs and,for safety reasons, provide a minimum of4mm clearance above the components onthe top of the PC card.

3.74 (95)

1.42 (36)

.14 (3.5)

.28 (7)

.28 (7)

.15 (3.8)

.20 (5.2)

3.46 ±0.02 (88 ±0.5)

1.14 ±0.02 (29 ±0.5)

2-0/.13 (3.4)HOLES

.54 (13.8)

.14 (3.5)

..28 (7)

3.74 (95)

1.97 (50)

.93 (23.7) .2 (5.2)

.28 (7)

.28 (7)

.15 (3.8)

3.46 ±0.02 (88 ±0.5)

3.46 ±0.02 (88 ±0.5)

4-0/.13 (3.4)HOLES

1.1 (28)

..28 (7)

.83 (21)

.65 (16.4)

TB2TB1

TB1 TB2

InputConnector

InputConnector

OutputConnector

OutputConnector

.06 (1.6)

.12 (3)

Max

.89 (22.6)

.73 (18.5)

.06 (1.6)

.12 (3)

Max

4.80 (122)

2.17 (55)

.31 (8)

.31 (8) .31 (8)

.31 (8)

.63 (16)

.20 (5.2)4.41 ±0.02 (112 ±0.5)

1.77±0.02 (45 ±0.5)

1.18(30)

2-0/..24 (6) MAX HOLES

..20 (5)1.02 (26)

.84 (21.4)

.06 (1.6)

.12 (3)

Max

TB2TB1

InputConnector

OutputConnector

Kepco, Inc. 131-38 Sanford Ave, Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 • E-Mail: hq@kepcopower.com • www.kepcopower.com

A N I S O 9 0 0 1 C O M P A N Y

146-1949

HIGHER POWERLOWER COST

100W75W 150W

THE NEW MODELS OF JBW POWER SUPPLIES FROM KEPCO

YEARS OFKEPCOPOWERSUPPLIES

60

Now you don't have to give up reliability, features or support to meet your bill of material cost targets. Kepco's Series JBW arelow cost 5V, 12V, 15V and 24V power supplies priced at about $.50 per watt, even in sample quantities. They are reliable PC card-style single output power supplies offering OEMs 75, 100 and 150 watts of d-c power. JBW feature wide range input (85-265V a-c),active PFC (Power Factor Correction) and carry the CE Mark and all safety agency recognitions, plus they are RoHS compliant.The JBWpower supplies have on-board filtering meeting FCC Class B conducted emissions compliance and feature overvoltage and overcurrentprotection. Full output power operation is guaranteed from -10 to + 50°C with convection cooling. (No forced air cooling is required.)

The JBW series comes with a full 1 year warranty supported by Kepco, a name known and trusted in the power supplyindustry for 60 years.

Please visit www.kepcopower.com/jbw.htm to check out the full specifications of our new JBW models as well asour lower power JBW 10, 15, 30 and 50W models and order a sample unit on-line. To see full specifications on our relatedmulti-output MTW series of 15, 30 and 60W power supplies, visit www.kepcopower.com/mtw.htmor give us or your local representative a call. We look forward to hearing from you. RoHS Compliant

(1) 0 to 100% load, 0 to 50°C, tested with 100µF electrolytic and 0.1µF film capacitors across the load, connected to the power supply via 5.9 inches (150mm) wires.(2) 4.2A peak, t≤ 10 seconds. (3) 5.0A peak, t≤ 10 seconds. (4) 7.5A peak, t≤ 10 seconds.

JBW MODEL TABLE

OUTPUT SETTING ADJUSTMENT OVP OUTPUT CURRENT SWITCHING NOISE(1) EFFICIENCY (%)TOLERANCE RANGE RANGE CURRENT (Max) LIMIT FREQUENCY RIPPLE

MODEL Volts Volts Volts Amps Amps mV p-p mV p-p 100V a-c 240V a-c

75 WATT MODELS

JBW 5-15K 5 ±0.25V 4.5-5.5 5.75-6.9 15.0 15.8 80 120 75 79

JBW 12-6.3K 12 ±0.6V 10.8-13.2 13.8-16.8 6.3 6.6 120 150 78 81

JBW 15-5.0K 15 ±0.75V 13.5-16.5 17.2-21.0 5.0 5.2 120 150 79 81

JBW 24-3.2K 24 ±1.2V 21.6-26.4 27.6-33.6 3.2(2) 4.4 120 150 82 84

100 WATT MODELS

JBW 5-20K 5 ±0.25V 4.5-5.5 5.75-6.9 20.0 21.0 80 120 78 80

JBW 12-8.5K 12 ±0.6V 10.8-13.2 13.8-16.8 8.5 10.6 120 150 80 82

JBW 15-6.7K 15 ±0.75V 13.5-16.5 17.2-21.0 6.7 8.38 120 150 80 82

JBW 24-4.3K 24 ±1.2V 21.6-26.4 27.6-33.6 4.3(3) 5.38 120 150 82 85

150 WATT MODELS

JBW 5-30K 5 ±0.25V 4.5-5.5 5.75-6.9 30.0 31.5 80 120 78 80

JBW 12-12K 12 ±0.6V 10.8-13.2 13.8-16.8 12.5 15.7 120 150 81 83

JBW 15-10K 15 ±0.75V 13.5-16.5 17.2-21.0 10.0 12.5 120 150 81 83

JBW 24-6.3K 24 ±1.2V 21.6-26.4 27.6-33.6 6.3(4) 7.87 120 150 82 84

Kepco, Inc. 131-38 Sanford Ave, Flushing, NY 11352 USATel: (718) 461-7000 • Fax: (718) 767-1102 E-Mail: hq@kepcopower.com • www.kepcopower.com

A N I S O 9 0 0 1 C O M P A N Y

• INPUT VOLTAGE:85-265V a-c (0 to 100% load, -10 to 60°C); 120-370V d-c.

• INPUT SOURCE FREQUENCY:Nominal 50/60 Hz; Range 47-66 Hz. (Above 66 Hz to 440 Hz the leakage current exceeds the VDE safety specification limit.)

• INPUT PROTECTION: Input Fuse value 5A, 250V.

• POWER FACTOR: 0.99 typ. at 100V a-c, 0.95 typ. at 240V a-c.

• LOAD CAPACITANCE: acceptable output capacitor 30,000µF max.

• STABILIZATION:Source Effect: (85 to 265V a-c) 0.4% max.

Load Effect: measured at sensing terminals (0% to 100% load change) 0.8% max.

Temperature Effect: (-10 to 50°C) 1.0% max.

Combined Effect: 2.0% max. (4% typical for overshoot at start-up).

Time Effect or Drift: (1/2 to 8 hr. at 25°C) 0.4% max.

• OVERVOLTAGE PROTECTION (OVP): Fixed, factory set.See Model Table. Latching will occur.

• OVERCURRENT: Square type, output voltage returns to rated level upon removal of cause of malfunction (long term overcurrent could damage units).

• OPERATING TEMPERATURE: -10° to 60°C (start up at -20°C.Cooling by natural convection. See Derating Plots.

• WITHSTAND VOLTAGE: (at 5 to 35°C ambient, 45 to 85% relative humidity, cutout current 10 mA):Between input and output terminals, 3000V a-c for 1 minute.Between input terminals and ground, 2000V a-c for 1 minute.Between output terminals and ground, 500V a-c for 1 minute.

• SAFETY: UL 60950-1.c and TUV Rheinland EN60950-1 (ambient temp 50°C max.) CE marked per the Low Voltage Directive (LVD), EN60950.

• EMC - EMISSIONS:Conducted Noise 0.15MHz to 30MHz; FCC Class B, VCCI-B,EN55011-B, EN55022-B.Input Harmonics (on a-c mains) 0 to 2KHz: EN 61000-3-2.

• EMC - IMMUNITY: Designed to meet EN 50082-2.

ESD: EN 61000-4-2 Level 4, normal operation.

Radiated Field Noise: EN 61000-4-3 Level 3, normal operation.

Electrical Fast Transient/Burst (EFT): EN 61000-4-4 Level 3,normal operation.

Surge: EN 61000-4-5 Level 4, no damage.

Conducted Noise: EN 61000-4-6 Level 3, normal operation.

Power Frequency Magnetic Field: EN 61000-4-8 Level 4,normal operation.

Interruptions and Voltage Dips, Short Variations:EN 61000-4-11, normal operation.

FEATURES DERATING PLOTS AND MOUNTING DIRECTIONS

OUTLINE DIMENSIONAL DRAWINGS

FIGURE 1 Derating Curve: 75W and 100W Models

Ambient Temperature (°C)0-20 -10 50 5510 20 30 40

60

50

40

30

20

10

100

90

80

70

START UP between -20 to -10°C

60

Mounting E, F

Mounting C, D

Mounting A

FIGURE 2 Derating Curve: 150W Models

NOTES 1. Method A (standard) is

recommended, apply derating curve per figures 1 & 2.

2. Method B is not allowed (inadequate cooling).

3. For Methods C, D, E and F, apply derating curve per figures 1 & 2.

Ambient Temperature (°C)0-20 -10 5010 20 30 40

60

50

40

30

20

10

100

90

80

70

START-UP between -20 to -10°C

60

Mounting F

Mounting E

Mounting C, D

Mounting A

25 35

Out

put

Pow

er R

atin

g (%

)

Out

put

Pow

er R

atin

g (%

)

A

B

C D E F

Install power supply

0.32 in.(8mm)

min. above base using spacers

75WMODELS

100WMODELS

150WMODELS

Fractional dimensions in light face type are in inches, dimensions in parentheses are in millimeters.

Visit: www.kepcopower.com