+ All Categories

Feb14

Date post: 02-Apr-2016
Category:
Upload: editor-ijitce
View: 221 times
Download: 3 times
Share this document with a friend
Description:
International Journal of Innovative Technology and Creative Engineering (ISSN:2045-8711) Vol.4 Issue.2
Popular Tags:
23
INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014 www.ijitce.co.uk
Transcript
Page 1: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Page 2: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

UK: Managing Editor

International Journal of Innovative Technology and Creative Engineering 1a park lane, Cranford London TW59WA UK E-Mail: [email protected] Phone: +44-773-043-0249

USA: Editor

International Journal of Innovative Technology and Creative Engineering Dr. Arumugam Department of Chemistry University of Georgia GA-30602, USA. Phone: 001-706-206-0812 Fax:001-706-542-2626

India: Editor

International Journal of Innovative Technology & Creative Engineering Dr. Arthanariee. A. M Finance Tracking Center India 17/14 Ganapathy Nagar 2nd Street Ekkattuthangal Chennai -600032 Mobile: 91-7598208700

Page 3: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

www.ijitce.co.uk

IJITCE PUBLICATION

International Journal of Innovative Technology & Creative Engineering

Vol.4 No.2

February 2014

www.ijitce.co.uk

Page 4: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

From Editor's Desk

Dear Researcher, Greetings! Research article in this issue discusses about Peristaltic MHD Flow of a Jeffrey. Let us review research around the world this month; The virtual currency is about more than money – the real innovation is what people are doing with the technology it is based on. BITCOIN has been called many things, from the future of money to a drug dealer's dream and everything else in between. But beyond creating the web's first native currency, the true innovation of Bitcoin's mysterious designer, Satoshi Nakamoto, is its underlying technology, the "block chain". That fundamental concept is being used to transform Bitcoin – and could even replace it altogether. So what is the block chain? It is a ledger of transactions that keeps Bitcoin secure and allows all users to agree on exactly who owns how many bitcoins. Each new block requires a record of recent transactions along with a string of letters and numbers, known as a hash, which is based on the previous block and produced using a cryptographic algorithm. The floating school built for Nigeria's water world.In Makoko, Nigeria, a water world of homes above the sea is no futuristic fantasy. For generations, people have lived in this sprawling slum on stilts above the lagoon that surrounds the country's largest city, Lagos. This floating school aims to bring much-needed education to the children of Makoko. At the same time, its architects say it is an exploration of how African cities can cope with the breakneck pace of urbanisation, and the flooding and sea level rise brought on by climate change. The school was built by local builders out of reclaimed materials from the area: it uses the empty plastic barrels abundant in Lagos as floats, for example. Its three levels include an open play space on the bottom, an enclosed classroom area in the middle and workshop space on the top. The school opened in spring 2013 and can accommodate up to 100 students. CLEAN energy inspired by the stars is the dream of scientists pursuing nuclear fusion, in which atomic nuclei fuse together and release energy. In a first for laser-driven fusion, scientists at a US lab say they have reached a key milestone called fuel gain: they are producing more energy than the fuel absorbed to start the reaction. But the National Ignition Facility (NIF) in Livermore, California, is still a long way from sparking a self-sustaining fusion reaction with an overall gain in energy – a process called ignition. Currently, the reactor as a whole needs more energy to operate than the amount that is produced. India unveils its first home-grown astronaut capsule. INDIA is about to take one small step towards human space flight. Last week the country's space agency unveiled a prototype of its first crew capsule, a 4-metre-high module designed to carry two people into low Earth orbit.Built by Hindustan Aeronautics in Bangalore, the prototype capsule cannot be hermetically sealed and so cannot take people into space. But if the rocket launch is a success, ISRO should be able to remotely test some in-flight controls and see how the module survives the stresses of re-entry and landing at sea. It has been an absolute pleasure to present you articles that you wish to read. We look forward to many more new technologies related research articles from you and your friends. We are anxiously awaiting the rich and thorough research papers that have been prepared by our authors for the next issue. Thanks, Editorial Team IJITCE

Page 5: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Editorial Members

Dr. Chee Kyun Ng Ph.D Department of Computer and Communication Systems, Faculty of Engineering, Universiti Putra Malaysia,UPM Serdang, 43400 Selangor,Malaysia. Dr. Simon SEE Ph.D Chief Technologist and Technical Director at Oracle Corporation, Associate Professor (Adjunct) at Nanyang Technological University Professor (Adjunct) at Shangai Jiaotong University, 27 West Coast Rise #08-12,Singapore 127470 Dr. sc.agr. Horst Juergen SCHWARTZ Ph.D, Humboldt-University of Berlin, Faculty of Agriculture and Horticulture, Asternplatz 2a, D-12203 Berlin, Germany Dr. Marco L. Bianchini Ph.D Italian National Research Council; IBAF-CNR, Via Salaria km 29.300, 00015 Monterotondo Scalo (RM), Italy Dr. Nijad Kabbara Ph.D Marine Research Centre / Remote Sensing Centre/ National Council for Scientific Research, P. O. Box: 189 Jounieh, Lebanon Dr. Aaron Solomon Ph.D Department of Computer Science, National Chi Nan University, No. 303, University Road, Puli Town, Nantou County 54561, Taiwan Dr. Arthanariee. A. M M.Sc.,M.Phil.,M.S.,Ph.D Director - Bharathidasan School of Computer Applications, Ellispettai, Erode, Tamil Nadu,India Dr. Takaharu KAMEOKA, Ph.D Professor, Laboratory of Food, Environmental & Cultural Informatics Division of Sustainable Resource Sciences, Graduate School of Bioresources, Mie University, 1577 Kurimamachiya-cho, Tsu, Mie, 514-8507, Japan Mr. M. Sivakumar M.C.A.,ITIL.,PRINCE2.,ISTQB.,OCP.,ICP Project Manager - Software, Applied Materials, 1a park lane, cranford, UK Dr. Bulent Acma Ph.D Anadolu University, Department of Economics, Unit of Southeastern Anatolia Project(GAP), 26470 Eskisehir, TURKEY Dr. Selvanathan Arumugam Ph.D Research Scientist, Department of Chemistry, University of Georgia, GA-30602, USA.

Review Board Members

Dr. Paul Koltun

Senior Research ScientistLCA and Industrial Ecology Group,Metallic & Ceramic Materials,CSIRO Process Science & Engineering Private Bag 33,

Clayton South MDC 3169,Gate 5 Normanby Rd., Clayton Vic. 3168, Australia

Dr. Zhiming Yang MD., Ph. D.

Department of Radiation Oncology and Molecular Radiation Science,1550 Orleans Street Rm 441, Baltimore MD, 21231,USA

Dr. Jifeng Wang

Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign Urbana, Illinois, 61801, USA

Dr. Giuseppe Baldacchini

ENEA - Frascati Research Center, Via Enrico Fermi 45 - P.O. Box 65,00044 Frascati, Roma, ITALY.

Dr. Mutamed Turki Nayef Khatib

Assistant Professor of Telecommunication Engineering,Head of Telecommunication Engineering Department,Palestine Technical University

(Kadoorie), Tul Karm, PALESTINE.

Page 6: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Dr.P.Uma Maheswari

Prof & Head,Depaartment of CSE/IT, INFO Institute of Engineering,Coimbatore.

Dr. T. Christopher, Ph.D.,

Assistant Professor & Head,Department of Computer Science,Government Arts College(Autonomous),Udumalpet, India.

Dr. T. DEVI Ph.D. Engg. (Warwick, UK),

Head,Department of Computer Applications,Bharathiar University,Coimbatore-641 046, India.

Dr. Renato J. orsato

Professor at FGV-EAESP,Getulio Vargas Foundation,São Paulo Business School,Rua Itapeva, 474 (8° andar),01332-000, São Paulo (SP), Brazil

Visiting Scholar at INSEAD,INSEAD Social Innovation Centre,Boulevard de Constance,77305 Fontainebleau - France

Y. Benal Yurtlu

Assist. Prof. Ondokuz Mayis University

Dr.Sumeer Gul

Assistant Professor,Department of Library and Information Science,University of Kashmir,India

Dr. Chutima Boonthum-Denecke, Ph.D

Department of Computer Science,Science & Technology Bldg., Rm 120,Hampton University,Hampton, VA 23688

Dr. Renato J. Orsato

Professor at FGV-EAESP,Getulio Vargas Foundation,São Paulo Business SchoolRua Itapeva, 474 (8° andar),01332-000, São Paulo (SP), Brazil

Dr. Lucy M. Brown, Ph.D.

Texas State University,601 University Drive,School of Journalism and Mass Communication,OM330B,San Marcos, TX 78666

Javad Robati

Crop Production Departement,University of Maragheh,Golshahr,Maragheh,Iran

Vinesh Sukumar (PhD, MBA)

Product Engineering Segment Manager, Imaging Products, Aptina Imaging Inc.

Dr. Binod Kumar PhD(CS), M.Phil.(CS), MIAENG,MIEEE

HOD & Associate Professor, IT Dept, Medi-Caps Inst. of Science & Tech.(MIST),Indore, India

Dr. S. B. Warkad

Associate Professor, Department of Electrical Engineering, Priyadarshini College of Engineering, Nagpur, India

Dr. doc. Ing. Rostislav Choteborský, Ph.D.

Katedra materiálu a strojírenské technologie Technická fakulta,Ceská zemedelská univerzita v Praze,Kamýcká 129, Praha 6, 165 21

Dr. Paul Koltun

Senior Research ScientistLCA and Industrial Ecology Group,Metallic & Ceramic Materials,CSIRO Process Science & Engineering Private Bag 33,

Clayton South MDC 3169,Gate 5 Normanby Rd., Clayton Vic. 3168

DR.Chutima Boonthum-Denecke, Ph.D

Department of Computer Science,Science & Technology Bldg.,Hampton University,Hampton, VA 23688

Mr. Abhishek Taneja B.sc(Electronics),M.B.E,M.C.A.,M.Phil.,

Assistant Professor in the Department of Computer Science & Applications, at Dronacharya Institute of Management and Technology, Kurukshetra.

(India).

Dr. Ing. Rostislav Chotěborský,ph.d,

Katedra materiálu a strojírenské technologie, Technická fakulta,Česká zemědělská univerzita v Praze,Kamýcká 129, Praha 6, 165 21

Page 7: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Dr. Amala VijayaSelvi Rajan, B.sc,Ph.d,

Faculty – Information Technology Dubai Women’s College – Higher Colleges of Technology,P.O. Box – 16062, Dubai, UAE

Naik Nitin Ashokrao B.sc,M.Sc

Lecturer in Yeshwant Mahavidyalaya Nanded University

Dr.A.Kathirvell, B.E, M.E, Ph.D,MISTE, MIACSIT, MENGG

Professor - Department of Computer Science and Engineering,Tagore Engineering College, Chennai

Dr. H. S. Fadewar B.sc,M.sc,M.Phil.,ph.d,PGDBM,B.Ed.

Associate Professor - Sinhgad Institute of Management & Computer Application, Mumbai-Banglore Westernly Express Way Narhe, Pune - 41

Dr. David Batten

Leader, Algal Pre-Feasibility Study,Transport Technologies and Sustainable Fuels,CSIRO Energy Transformed Flagship Private Bag 1,Aspendale,

Vic. 3195,AUSTRALIA

Dr R C Panda

(MTech & PhD(IITM);Ex-Faculty (Curtin Univ Tech, Perth, Australia))Scientist CLRI (CSIR), Adyar, Chennai - 600 020,India

Miss Jing He

PH.D. Candidate of Georgia State University,1450 Willow Lake Dr. NE,Atlanta, GA, 30329

Jeremiah Neubert

Assistant Professor,Mechanical Engineering,University of North Dakota

Hui Shen

Mechanical Engineering Dept,Ohio Northern Univ.

Dr. Xiangfa Wu, Ph.D.

Assistant Professor / Mechanical Engineering,NORTH DAKOTA STATE UNIVERSITY

Seraphin Chally Abou

Professor,Mechanical & Industrial Engineering Depart,MEHS Program, 235 Voss-Kovach Hall,1305 Ordean Court,Duluth, Minnesota 55812-3042

Dr. Qiang Cheng, Ph.D.

Assistant Professor,Computer Science Department Southern Illinois University CarbondaleFaner Hall, Room 2140-Mail Code 45111000 Faner Drive,

Carbondale, IL 62901

Dr. Carlos Barrios, PhD

Assistant Professor of Architecture,School of Architecture and Planning,The Catholic University of America

Y. Benal Yurtlu

Assist. Prof. Ondokuz Mayis University

Dr. Lucy M. Brown, Ph.D.

Texas State University,601 University Drive,School of Journalism and Mass Communication,OM330B,San Marcos, TX 78666

Dr. Paul Koltun

Senior Research ScientistLCA and Industrial Ecology Group,Metallic & Ceramic Materials CSIRO Process Science & Engineering

Dr.Sumeer Gul

Assistant Professor,Department of Library and Information Science,University of Kashmir,India

Dr. Chutima Boonthum-Denecke, Ph.D

Department of Computer Science,Science & Technology Bldg., Rm 120,Hampton University,Hampton, VA 23688

Page 8: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Dr. Renato J. Orsato

Professor at FGV-EAESP,Getulio Vargas Foundation,São Paulo Business School,Rua Itapeva, 474 (8° andar)01332-000, São Paulo (SP), Brazil

Dr. Wael M. G. Ibrahim

Department Head-Electronics Engineering Technology Dept.School of Engineering Technology ECPI College of Technology 5501 Greenwich Road -

Suite 100,Virginia Beach, VA 23462

Dr. Messaoud Jake Bahoura

Associate Professor-Engineering Department and Center for Materials Research Norfolk State University,700 Park avenue,Norfolk, VA 23504

Dr. V. P. Eswaramurthy M.C.A., M.Phil., Ph.D.,

Assistant Professor of Computer Science, Government Arts College(Autonomous), Salem-636 007, India.

Dr. P. Kamakkannan,M.C.A., Ph.D .,

Assistant Professor of Computer Science, Government Arts College(Autonomous), Salem-636 007, India.

Dr. V. Karthikeyani Ph.D.,

Assistant Professor of Computer Science, Government Arts College(Autonomous), Salem-636 008, India.

Dr. K. Thangadurai Ph.D.,

Assistant Professor, Department of Computer Science, Government Arts College ( Autonomous ), Karur - 639 005,India.

Dr. N. Maheswari Ph.D.,

Assistant Professor, Department of MCA, Faculty of Engineering and Technology, SRM University, Kattangulathur, Kanchipiram Dt - 603 203, India.

Mr. Md. Musfique Anwar B.Sc(Engg.)

Lecturer, Computer Science & Engineering Department, Jahangirnagar University, Savar, Dhaka, Bangladesh.

Mrs. Smitha Ramachandran M.Sc(CS).,

SAP Analyst, Akzonobel, Slough, United Kingdom.

Dr. V. Vallimayil Ph.D.,

Director, Department of MCA, Vivekanandha Business School For Women, Elayampalayam, Tiruchengode - 637 205, India.

Mr. M. Moorthi M.C.A., M.Phil.,

Assistant Professor, Department of computer Applications, Kongu Arts and Science College, India

Prema Selvaraj Bsc,M.C.A,M.Phil

Assistant Professor,Department of Computer Science,KSR College of Arts and Science, Tiruchengode

Mr. G. Rajendran M.C.A., M.Phil., N.E.T., PGDBM., PGDBF.,

Assistant Professor, Department of Computer Science, Government Arts College, Salem, India.

Dr. Pradeep H Pendse B.E.,M.M.S.,Ph.d

Dean - IT,Welingkar Institute of Management Development and Research, Mumbai, India

Muhammad Javed

Centre for Next Generation Localisation, School of Computing, Dublin City University, Dublin 9, Ireland

Dr. G. GOBI

Assistant Professor-Department of Physics,Government Arts College,Salem - 636 007

Dr.S.Senthilkumar

Post Doctoral Research Fellow, (Mathematics and Computer Science & Applications),Universiti Sains Malaysia,School of Mathematical Sciences,

Pulau Pinang-11800,[PENANG],MALAYSIA.

Page 9: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Manoj Sharma

Associate Professor Deptt. of ECE, Prannath Parnami Institute of Management & Technology, Hissar, Haryana, India

RAMKUMAR JAGANATHAN

Asst-Professor,Dept of Computer Science, V.L.B Janakiammal college of Arts & Science, Coimbatore,Tamilnadu, India

Dr. S. B. Warkad

Assoc. Professor, Priyadarshini College of Engineering, Nagpur, Maharashtra State, India

Dr. Saurabh Pal

Associate Professor, UNS Institute of Engg. & Tech., VBS Purvanchal University, Jaunpur, India

Manimala

Assistant Professor, Department of Applied Electronics and Instrumentation, St Joseph’s College of Engineering & Technology, Choondacherry Post,

Kottayam Dt. Kerala -686579

Dr. Qazi S. M. Zia-ul-Haque

Control Engineer Synchrotron-light for Experimental Sciences and Applications in the Middle East (SESAME),P. O. Box 7, Allan 19252, Jordan

Dr. A. Subramani, M.C.A.,M.Phil.,Ph.D.

Professor,Department of Computer Applications, K.S.R. College of Engineering, Tiruchengode - 637215

Dr. Seraphin Chally Abou

Professor, Mechanical & Industrial Engineering Depart. MEHS Program, 235 Voss-Kovach Hall, 1305 Ordean Court Duluth, Minnesota 55812-3042

Dr. K. Kousalya

Professor, Department of CSE,Kongu Engineering College,Perundurai-638 052

Dr. (Mrs.) R. Uma Rani

Asso.Prof., Department of Computer Science, Sri Sarada College For Women, Salem-16, Tamil Nadu, India.

MOHAMMAD YAZDANI-ASRAMI

Electrical and Computer Engineering Department, Babol "Noshirvani" University of Technology, Iran.

Dr. Kulasekharan, N, Ph.D

Technical Lead - CFD,GE Appliances and Lighting,

GE India,John F Welch Technology Center, Plot # 122, EPIP, Phase 2,Whitefield Road,Bangalore – 560066, India.

Dr. Manjeet Bansal

Dean (Post Graduate),Department of Civil Engineering ,Punjab Technical University,Giani Zail Singh Campus, Bathinda -151001 (Punjab),INDIA

Dr. Oliver Jukić

Vice Dean for education, Virovitica College, Matije Gupca 78,33000 Virovitica, Croatia

Dr. Lori A. Wolff, Ph.D., J.D.

Professor of Leadership and Counselor Education, The University of Mississippi, Department of Leadership and Counselor Education, 139 Guyton

University, MS 38677

Page 10: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

www.ijitce.co.uk

Contents

Effect of Heat Transfer on the Peristaltic MHD Flow of a Jeffrey Fluid in An Inclined Channel by V.P. Rathod and Mahadev. M................................................................................................................................................................[180]

Page 11: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

180 www.ijitce.co.uk

Effect of Heat Transfer on the Peristaltic MHD Flow of a Jeffrey Fluid in

An Inclined Channel V.P. Rathod* and Mahadev. M.

Department of studies and Research in Mathematics, Gulbarga University, Gulbarga-585106, Karanataka, India

Corresponding Author E-mail address: [email protected]

Abstract— Peristaltic transport of a conducting Jeffrey fluid in an inclined channel with heat transfer is studied under long wave length and low Reynolds number approximations. An exact solution is presented for the temperature field. The expressions for axial velocity, axial pressure gradient, Stream line and coefficient of heat transfer have been obtained analytically. The effect of various parameters on the flow characteristics are discussed with the help of graph.

Key words — Jeffrey fluid, MHD flow, heat transfer, inclined channel.

I. INTRODUCTION

Peristaltic pumping is a form of fluid transport which occurs in a biological system. The study of peristaltic motion has gained considerable interest because of its extensive role in transporting many physiological fluid in the body in various situations such as urine transport from the kidney to bladder, transport of the spermatozoa in the ducts afferents of male reproductive tract, the moment of chyme in the gastrointestinal tract, swallowing of food through esophagus and vasomotion of small blood vessels. Many mechanical devices have been designed on the peristaltic pumping to transport fluids without internal moving parts, for example, the transport of slurries, sensitive or corrosive fluids, sanitary fluid and noxious fluids in the nuclear industries. The literature on this topic is quite extensive. Mention may be made to some recent theoretical and experimental contributions Shapiro and Jaffrin [1], Hayat and Sajid [2], El Misery et al.[3],Yin and Fung[4,5], Pzrikidis [6], Shukla and gupta[7], Vjravelu et al.[8,9], Raju and Devanathan[10] in the field for Newtonian fluids. Such approximation is true in the ureter but it fails to give an adequate understanding of food mixing and chyme moment in the intestine, fuel slurries, flow of plasma, flow of mercury amalgams, and lubrication with heavy oils and greases etc. Also, the assumptions that most of the physiological fluid behave like Newtonian fluid is not true in reality. With all these facts in mind, it is clear that non Newtonian fluid plays an indispensable role in peristaltic flow problem.

A number of researchers have been discussed the effect of magnetic field on peristaltic flow Mekheimer [11], Harikrishana and Subbareddyy [12], Suryanarayana Reddy et al. [13], Subba Reddy and Gangadhar [14], Elshahed and Haroun [15], Kothadapani [16, 17], Affi and Gad[118], Krishana kumari and Raman Murthy [19], Nadeem and Akbar [21], due to its applications in bio engineering and medical devices. Specially, magnetic wound or cancer treatment causes hyperthermia, bleeding reduction during surgeries, and targeted transport of drugs using magnetic particles as drug carries are few examples.

The interaction of peristalsis in connection with heat transfer has also received some attention Nadeem and Akbar [21], Srinivas and Gayatri [22], Hayat and Heena [23], Hayat and Ali [24], Hayat et al.[25] as it might be relevant in processes like hemodialysis and oxygenation. Rathod and Mahadev [26] have studied the effect of thickness of porous material on the peristaltic pumping of Jeffrey fluid with non-erodible porous ling wall. Effects of magnetic field and an endoscope on peristaltic motion is studied by Rathod and Asha [27]. Rathod and Pallavi [28] have discussed the influence of wall properties on MHD peristaltic transport of dusty fluid. The present article studies the effect of heat

transfer on peristaltic MHD flow of Jeffrey fluid in an

inclined channel. The governing equations of Jeffrey

fluid in Cartesian co-ordinate have been modeled. The

equations are simplified using long wave length and low

Reynolds number approximations. The closed form of

solution for velocity field and temperature are obtained.

The influence of various parameters on the flow

characteristics, the temperature and heat transfer

coefficient are discussed through graph.

2. FORMULATION OF THE PROBLEM Consider the peristaltic pumping of a Jeffrey

fluid with heat transfer in an inclined channel of half- width ‘a’. A longitudinal train of progressive sinusoidal wave takes place on the upper and lower wall of the channel. We further assume that the fluid is electrically

conducting. A uniform magnetic field 0B is applied in

the transverse direction to the flow. The Reynolds number is taken small so that the induced magnetic field is neglected. For simplicity, we restrict our discussion to the half width of the channel as shown in figure .(1)

Page 12: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

181 www.ijitce.co.uk

Figure.1. Physical model

The wall deformation is given by

2

( , ) ( )H x t a bCos X ct

(1)

where b is amplitude of the waves and λ is the wave length. The constitutive equations for an incompressible Jeffrey fluid are

T PI S (2)

2

1

( )1

S

(3)

where T and S are Cauchy stress tensor and extra stress tensor, p is the pressure, I is the identity tensor, is

the dynamic viscosity, 1 is the ratio of relaxation to retardation times, 2 is the retardation time, is the shear

rate and dots over the quantities denote differentiation.

Under the assumptions that the channel length is an integral multiple of the wave length and the pressure

difference across the ends of the channel is a constant, the flow is inherently unsteady in the laboratory frame

( , )X Y and become steady in the wave frame ( , )x y which is moving with velocity ‘c’ along the wave. The

transformation between these two frames is given by

, , ,x X ct y Y u U v V (4)

where U and V are velocity components in the laboratory frame and u and v are the velocity components in the wave frame. In the many physiological situations it is proved experimentally that the Reynolds number of the flow is very small. So, we assume that the wavelength is infinite, the flow is of Poiseuille type at each local cross-section. Introducing the non-dimensional quantities

2

2 2

2

1 0 0

1 0

2 2 2, , , , , ,

2, , , , , , ,

, ( ) , ,( )p

x y u v a a px y u v p

a c c c

a a b ga ca ct S S G R Pr

c a c k

cEc T T T T u v

c T T y x

where R is the Reynolds number, G is the gravitational parameter, Ec is the Eckert number and Pr is the Prandtl

number. The equations governing the flow become

0,u u

x y

(5)

Page 13: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

182 www.ijitce.co.uk

2( 1) ( 1) sin

xyxxSSu u p

R u v u gx y x x y

(6)

3 2( 1) cos

xy yyS Sv v pR u v g

x y x x y

(7)

2 222 22 2 2

2 2( 1) 2

u u v uPrR u v N N

x y x y x y x y

(8)

where 2

1

21 ( ) ,

1xx

c v uS u

a x y x

2

1

21 ( ) ,

1yy

c v uS u

a x y y

2

1

11 ,

1xy

c v u vS u

a x y y x

and

2

2

10

1

1

xyS u

y y

The non dimensional boundary conditions are

0u

y

; 0 0at y

y

(9)

1u ; 1 at y h (10)

Using long wavelength approximation and dropping terms of order and higher.

Eqs. (6) - (8) reduces to

21( 1)

1

u pM u GSin

y y x

(11)

0p

y

(12)

22

2

10

uEc

Pr y y

(13)

where

22 0B a

M

3. SOLUTION OF THE FROBLEM Solving the Eq. (11) with the boundary conditions (9), we get

2

22(( 1 ) )

( 1 )

P Gsin P Gsin Mu cosh M y

MM cosh Mh

(14)

where p

Px

.

Integrating the equation (14) and using the conditions at = 0y , we get the stream function as

2

2 2

( sin )sinh 1{ cosh[ 1 ] ( sin ) *

1

(cosh 1 sinh (1 ) 1 (1 ) }

P G hMy hM M P G

M

hM h M Tanh M

(15)

Substituting Eq. (14) into Eq. (13) subject to the boundary conditions (10), the temperature is

Page 14: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

183 www.ijitce.co.uk

2 2 2 2 2 4 2

4

2 2

1{2 (2 ( sin ) ( )(1 )) (4 ( sin ) )

8

cosh(2 1 ) ( sin ) cosh(2 1 )sech( 1 ) }

M M Br p G h y M Br p GM

hM Br p G My Mh

(16)

where Br EcPr is the Brinkman number.

The coefficient of heat transfer is given by

x yZ h . (17)

The volume flux ‘q’ through each cross section in the wave frame is given by

0

h

q udy (18)

2

2

1 ( ) ( 1 )

1

P Gsin Tanh M hP Gsin M h

M M

(19)

The expression for pressure gradient from Eq. (19) is given by 2 21 (( ) ( ) ) . ( 1 )

( 1 ) 1

M q M M Gsin h Gsin Tanh M hp

x Tanh M h Mh

(20)

The instantaneous volume flow rate ( , )Q x t in the laboratory frame between the central line and the wall is

0

( , ) ( 1)

h

Q x t u dy q h (21)

Averaging the Eq. (21) over one period yields the time mean flow rate (time averaged flow rate) Q as

0

11

T

Q Qdt qT

(22)

The pressure difference and frictional force across one wave length in an inclined channel is given by

1

0

pp dx

x

(23)

1

0

pF h dx

x

(24)

4. Results and Discussion

To Study the behavior of the distribution of the

axial velocity u, numerical calculations for several values

of Jeffrey fluid parameter , Hartman number M , angle

of inclination , gravitational parameter G are carried

out. Fig. 2(a) shows that an increase in results in

increase of velocity distribution. The effect of on the

velocity distribution can be seen through Fig. 2(b). It reveals that the axial velocity decreases with increasing . Fig. 2(c) displays the effect of G on the velocity

distribution for fixed values of other parameters. It is observed that the velocity increases with increase of G. The effect of the M on the velocity distribution is illustrated in Fig. 2(d). It is evident that, increase the value of M has a tendency to slow down the fluid motion and fluid moves like a block, which shows some sort of rigidity. This is because of the presence of the transverse magnetic field creates a resistive force similar to the drag force that acts in the opposite direction of the fluid motion, thus causing the velocity of the fluid to decrease.

The effect of heat transfer on peristalsis is illustrated in Fig.3. Fig. 3(a) is made to see the variation

temperature for various values of Brinkman number

Br . It is observed that the temperature profiles are

almost parabolic and the increase of Br , the temperature distribution increases. From Fig. 3(b), it can be noticed that the temperature decreases with an increase of M. Figs. 3(c) and 3(d) are plotted to see the influence of Jeffrey fluid parameter and angle of inclination on the temperature distribution. It is observe

that an increase in Jeffrey fluid parameter affects the

temperature profile in an opposite way to that of angle of inclination.

Fig. 4 is plotted to study the effect of Jeffrey fluid

parameter , Hartman number M , angle of inclination

, gravitational parameter G on the pressure gradient

Figs. 4(a) and 4(c) indicate that the pressure gradient increases with increase of M and G. From Figs. 4(b) and 4(d), it is observe that pressure gradient decreases with

increase of and .

Page 15: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

184 www.ijitce.co.uk

Fig.5 shows the behavior of heat transfer co-

efficient Z. From this figure it is observed that due to peristalsis the heat transfer coefficient is in oscillatory behavior. The absolute value of heat transfer coefficient

decreases with increasing and M while it increases

with increase of Br and .

5. TRAPPING Trapping is an interesting phenomenon in

peristaltic motion. It is basically the formation of an internally circulating bolus of the fluid by closed stream lines. The effect of M on trapping can be seen in Fig. 6. We observed that the size of the bolus reduces with an

increase in M. The effects of and G on the stream

lines are plotted in Figs.7-8. It is observed that the size

of trapping bolus increases with increasing and G.

Figure. 2. The velocity distribution for ( 0.4 , 0.25x ); other parameters are (a) , 0.5, 24

G M

, (b)

2, 0.5, 1M G , (c) , 2, 14

M

, (d) , 0.5, 14

G

.

Page 16: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

185 www.ijitce.co.uk

Figure. 3.Temperature distribution for ( 0.4 , 0.25x ); other parameters are

(a) , 0.5, 2,4

G M

1 . (b) , 0.5, 1, 34

G Br

.

(c) , 2, 0.5, 34

M G Br

. (d) 2, 0.5, 1, 3.M G Br

Page 17: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

186 www.ijitce.co.uk

Figure. 4. Pressure gradient versus x for (a) 0.4 , 2, , 33

G

.

(b) 2, 2, 1, 0.4G M . (c) , 2, 1, 0.43

M

.(d) , 2, 1, 0.43

G M

.

Page 18: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

187 www.ijitce.co.uk

Figure. 5. Coefficient of heat transfer for (a) 0.6, 5, 0.2, 2, 3.M G Br

(b) , 0.2, 2, 3, 0.63

G Br

. (c) , 0.2, 2, 5, 0.63

G M

(d) , 0.2, 3, 5, 0.63

G Br M

.

Page 19: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

188 www.ijitce.co.uk

Figure. 6. Streamlines for (a) 0.1.M (b) 0.2.M (c) 0.3.M (d) 0.4M ; other

parameters are 00.4, 30 , 4, 0.8G .

Page 20: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

189 www.ijitce.co.uk

Figure. 7. Streamlines for (a) 2 (b) 3 (c) 4 (d) 5 ; other parameters are 00.4, 30 , 0.4, 0.8M G

Page 21: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

190 www.ijitce.co.uk

Figure.8. Streamlines for different values of (a) 4G (b) 5G (c) 6G

(d) 7G ; Other parameters are00.4, 30 , 0.4,M 2 .

Page 22: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

191 www.ijitce.co.uk

REFERENCES

[1] Shapiro AH, Jaffrin MY, Weinberg S.L. Peristaltic pumping with long wavelength at lowReynolds number. J Fluid Mech., 37(1969),799-825.

[2] Ali N, Hayat T, Sajid M. Peristaltic flow of a couple stress fluids in an asymmetric channel. Biorheology.,44(2007),125-138. [3] EL Misery, A.M. EL Shehawey, E.F. Hakeem A. Peristaltic motion of an incompressible generalized Newtonian fluid in planar channel. J Phys Soc Jpn.,65(1996),3524-3529. [4] Yin C.C and Fung Y.C. Peristaltic waves in circular cylindrical tubes J Appl Mech., 36(1969) 579-587. [5] Yin, C.C and Fung, Y.C. Comparison of theory and experiment in peristaltic transport. J Fluid Mech., 7(1971), 93-112. [6] Pzrikidis, C. A study of peristaltic flow. J Fluid Mech., 279(1994),177-195. [7] Shukla, J.B and Gupta, S.P. Peristaltic transport of a power law fluid with variable viscosity. J Biomech Eng., 104(1982,)182 -186. [8] Vjravelu, K, Sreenadh, S and Ramesh babu, V. Peristaltic transport of Hershel-Bulkely fluid in a channel. Appl Math Comput. 16(2005),726-735. [9] Vjravelu, K, Sreenadh S, Ramesh babu V. Peristaltic transport of Hershel-Bulkely fluid in contact with Newtonian fluid. Quart of Appl Math 64 (2006),593-604. [10] Rajum, K.K, Devanathan, R. Peristaltic motion of non-Newtonian fluid. Rheol Acta.11(1972), 170-178. [11] Mekheimer, Kh.S. Non linear peristaltic transport of magneto hydrodynamic flow in aninclined planar channel. Arab j Sc Eng. 2(200), 183-201. [12] Hrikrishana ., Subba Reddy, M.V. MHD effects on peristaltic flow of a Bingham fluid in an inclined channel. Int J Math Archive. 2(2011), 665-674. [13] Sryanarayana Reddy, M. Sankar Shekar Raju, G and Subba Reddy M.V. Jayalaxmi, K. Peristaltic MHD flow of a Bingham fluid through porous medium in a channel. Afri J Sci Res. 3(2011), 179-. [14] Subba Reddy, M.V. Ganagadhar, K. Non linear peristaltic motion of carreau fluid under the effect of magnetic field in an inclined channel. Int J Dynamics., 6((2011),) 63-76. [15] Elshahed, M. Haroun, M.H. Peristaltic transport of Johnson- segalman fluid under the effect of a magnetic field. Math Probl Eng.,6(2005)663-677. [16] Kothandapani, M. Srinivas, S. On the influence of wall properties in the MHD peristaltic transport with heat transfer and porous medium. Phys. Lett. A 372(2008) 4586-4591. [17] Affi N.A.S Gad N.S. Interaction of peristaltic flow with pulsatile magneto fluid through a porous medium. Acta Mech. 149(2001),229-237. [18] Kothandapani, ., Srinivas, S. Peristaltic transport of a Jeffery fluid under the effect of magnetic field in an asymmetric channel. Int J Non-Linear Mech. 43(2008), 915-924.

[19] Krishnakumari, S.V.H.N. Raman Murthy, M.V. Peristaltic pumping of Jeffrey fluid under the effect of magnetic field in an inclined channel. App. Math Sci. 5(2011), 447- 458. [20] Nadeem, S. Akbar, N.S. Effect of heat transfer on peristaltic transport of MHD Newtonian fluid with variable viscosity: Application to Adomain decomposition method. Comm Nonlinear Sci Numer Simul. 14(2009),3844 - 3855. [21] Nadeem, S. Akbar, N.S. Influence of heat transfer on a peristaltic transport of Hershel Bulkley fluid in a non uniform inclined tube. Comm Nonlinear Sci Numer Simul.14 (2009),4100 - 4113. [22] Srinivas, S. Gayatri, R. Peristaltic transport of a Newtonian fluid in a vertical asymmetric channel with heat transfer and porous medium, 215(2009), 185–196. [23 ]Hayat, T. Hina, N. The influence of wall prosperities on MHD flow of a Maxwell fluid with heat and Mass transfer. Nonlinear Anal. Real world Appl. 11(2010), 3155-3169. [24] Hayat, T. Ali, N. Simultaneous effects of slip and heat transfer on the peristaltic flow. Commun Nonlinear Sci Numer Simulat. 15 (2010), 1526-1537. [25] Hayat, T. Quereshi Mu, Hussain, Q. Effect of heat transfer on the peristaltic flow of an electrically conducting fluid in a porous space. Appl Math Model 33(2009),1862-1873. [26] Rathod V.P. and Mahadev, M. Effect of thickness of the porous material on the peristaltic pumping of a Jefferey fluid with non-erodible porous lining wall. Int J Math Archive. 2(2011), 1-10. [27] Rathod, V. P. and Asha S.K. Effect of magnetic field and an endoscope on peristaltic motion. Adv Appl Sci. Res. 2(2011),102-109. [28] Rathod, V.P and Pallavi Kulkarni. The influence of wall properties on MHD Peristaltic transport of dusty fluid. Adv Appl Sci. Res. 2(2011),265-279.

Page 23: Feb14

INTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY AND CREATIVE ENGINEERING (ISSN:2045-8711) VOL.4 NO.2 FEBRUARY 2014

192 www.ijitce.co.uk


Recommended