+ All Categories
Home > Documents > FEC Mode- OFF - eGPS

FEC Mode- OFF - eGPS

Date post: 02-Feb-2022
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
13
WR1 Radio Programming (For Satel Radios) www.eGPS.net o First you would want to go to our website. Please find the SUPPORT selection, then choose “Guides, Software, & Firmware”. Downloadables o Select WR1 Receiver, Under How-To Guides download the WR1 Radio Programming (For Satel Radios) PDF o Under Software, download the GNSS WR1 Satel Radio Manager Channel Settings & GNSS WR1 Satel Radio Manager Software ZIP files. Extract files. WR1 o Attach antenna, turn on WR1 GPS unit, then use USB cable to connect to your computer. Double press power button to put in Base (UHF) mode. o Go to the Extracted GNSS WR1 Satel Radio Manager Software (Sateline Configuration Manager for Hi-Target) Folder o Open SATEL_ConfigurationManager Check Baud Rate, should be 19200 bps or it will not connect Connect, Then select Program Prefereces Modem Settings tab Load ChannelList o Choose Extracted GNSS WR1 Satel Radio Manager Channel Settings Folder Choose DefaultChannelSet.csf o Check Settings Channel Spacing- 12.5 kHz FEC Mode- OFF Radio Compatibility- SATELLINE-3AS o Select Write Settings o Disconnect WR1 will restart itself. eGPS Solutions | 770-695-3361 | www.eGPS.net
Transcript

WR1 Radio Programming (For Satel Radios)

• www.eGPS.net

o First you would want to go to our website. Please find the SUPPORT selection, then

choose “Guides, Software, & Firmware”.

• Downloadables

o Select WR1 Receiver, Under How-To Guides download the WR1 Radio Programming (For

Satel Radios) PDF

o Under Software, download the GNSS WR1 Satel Radio Manager Channel Settings &

GNSS WR1 Satel Radio Manager Software ZIP files. Extract files.

• WR1

o Attach antenna, turn on WR1 GPS unit, then use USB cable to connect to your

computer.

▪ Double press power button to put in Base (UHF) mode.

o Go to the Extracted GNSS WR1 Satel Radio Manager Software (Sateline Configuration

Manager for Hi-Target) Folder

o Open SATEL_ConfigurationManager

▪ Check Baud Rate, should be 19200 bps or it will not connect

• Connect, Then select Program Prefereces

▪ Modem Settings tab

• Load ChannelList

o Choose Extracted GNSS WR1 Satel Radio Manager Channel

Settings Folder

▪ Choose DefaultChannelSet.csf

o Check Settings

▪ Channel Spacing- 12.5 kHz

▪ FEC Mode- OFF

▪ Radio Compatibility- SATELLINE-3AS

o Select Write Settings

o Disconnect

▪ WR1 will restart itself.

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 1

• First you would want to go to our website.

• Please find the SUPPORT selection, then choose “Guides, Software, & Firmware”.

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 2• Select WR1 Receiver, Under

How-To Guides download the WR1 Radio Programming (For SatelRadios) PDF

• Under Software, download the GNSS WR1 Satel Radio Manager Channel Settings & GNSS WR1 Satel Radio Manager Software ZIP files. Extract files.

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 3• Go to the Extracted GNSS WR1

Satel Radio Manager Software (Sateline Configuration Manager for Hi-Target) Folder

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 4• select Program Prefereces• Check Baud Rate, should be

19200 bps

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 5• Connect

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 6• Connected

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 7• Modem Settings tab

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 8• Load ChannelList

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 9• Choose Extracted GNSS WR1

Satel Radio Manager Channel Settings Folder

• Choose DefaultChannelSet.csf

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 10• Check Settings

• Channel Spacing- 12.5 kHz• FEC Mode- OFF• Radio Compatibility-

SATELLINE-3AS

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 11• Select Write Settings

eGPS Solutions | 770-695-3361 | www.eGPS.net

Figure 12• Disconnect

• WR1 will restart itself.

eGPS Solutions | 770-695-3361 | www.eGPS.net


Recommended