Fiberglass Catalog 12-5

Fiberglass EnclosuresDurable non-metallic enclosures designed to provideexceptional protection in the harshest environments

2 Cooper-Crouse Hinds Fiberglass Enclosures [email protected]

Table of Contents

Introduction to Fiberglass Enclosures ............2

Quick Selector Guide .....................................4

Small Line Series ............................................6

Pushbutton Series ..........................................8

Junction Box Series .......................................11

Raised Cover Series .......................................14

Xtra Deep Series.............................................17

Advantage Series ...........................................19

Wall Mount & Large Fiberglass Enclosures ...21

Disconnect & Circuit Breaker Series ..............26

Accessories ....................................................28

Krydon Series .................................................32

Custom Built Solutions...................................33

Index...............................................................37

Cooper Crouse-Hinds

Non-Metallic EnclosuresSetting the standard with safe, reliable electricalproducts, people, procedures and proficiencies.Delivering advantage you can use every day.

For more than a century, companies have cometo rely on Cooper Crouse-Hinds for value theycan trust to grow their business. By integratinga comprehensive line of reliable electrical productswith expert support, industry insights, and localavailability, we enhance safety and productivityin the most demanding industrial and commercialenvironments worldwide. This philosophy is at thecore of every product we develop and everysolution we engineer.

Reliability you can count on for the mostcorrosive applicationsPartnering with Cooper Crouse-Hinds and ourdedicated team of industry experts can help yousucceed. Since 1897, we have led the developmentof safer, more reliable ways to power the mostchallenging harsh and hazardous areas. CooperCrouse-Hinds has long been established as aleader in enclosures for Hazardous, Industrialand Commercial applications. Enclosures areengineered and manufactured to perform throughthe most corrosive conditions needed by OEMs,MRO, Waste Water Treatment Facilities andChemical Plants. These exceptionally durable,corrosion resistant enclosures can withstandextreme abuse and exposure to chemicals,water, and extreme conditions.

Cooper Crouse-Hinds Fiberglass Enclosures

Cooper-Crouse Hinds Fiberglass Enclosures [email protected]

Enclosure knowledge and experience with: Products that deliver superior performance Low maintenance choices, like durable non-metallicenclosures with features designed to provide optimumprotection in the harshest environments

Dedicated and expert sales support to help selectproducts that perform reliably and cost effectively

A commitment to safety and productivityCooper Crouse-Hinds is helping more industrialfacility owners, operators and engineers succeedeach day safely and cost effectively. Its part of ourcommitment to focus on industries where our experience,expertise and products can make the biggest impact.

Fiberglass Enclosures are:

Lighter and easier to handle

Strong enough to hold upunder extreme conditions

Equal to stainless steel incorrosion and chemicalresistance, and far better thancarbon steel

Non-conductive (an electricalinsulator rather than electricalconductor)

Easier to punch, drill or saw

Less expensive to ship

Fiberglass Enclosures Quick Selector Guide

SMALL LINESERIES

Small Enclosure3 x 3 to 17 x 3

Fiberglass reinforced thermoset polyester

Poured polyurethane seamless gasket

Recessed captive stainless steel screws

304 stainless steel used on all externalhardware

11 UL/cUL

CSA Std C22.2

NEMA Types 1, 3R, 4X,

6P, 12

PUSHBUTTON SERIES Small Enclosure6 x 3 to 13.5 x 11.5Inline and multi-holeconfigurations,30mm and 22mmconfigurationsoffered





21 UL/cUL

CSA Std C22.2

NEMA Types 1, 3, 4X,

6P, 12

JUNCTION BOXSERIES Instrument Enclosure

6 x 4 to 20 x 16 Fiberglass reinforced thermoset polyester




76 UL/cUL

CSA Std C22.2


6P, 12

RAISED COVERSERIES Instrument Enclosure



Stainless steel screws


33 UL/cUL

CSA Std C22.2


6P, 12

ADVANTAGESERIES Instrument Enclosure





36 UL/cUL

CSA Std C22.2

NEMA Types 1, 3, 3S, 4X,

12, 13


CATALOGSERIES

PRODUCT GROUP& SIZE MATERIALS

NUMBEROF SIZES

ENVIRONMENTALRATING


WALL MOUNT SERIES-3R AND 4XSERIES

Wall Mount Enclosure16 x 10 to 48 x 36NEMA 3R or 4X





28 UL/cUL

CSA Std C22.2

(3R) NEMA Types 1, 3R

(4X) NEMA Types 1, 3,

3R, 4X, 12

WALL MOUNT SERIES-LARGE SERIES

Wall Mount Enclosure/Free-standingEnclosure48 x 36 to 72 x 49Large & Free-standingenclosures with doubledoor options





7 UL/cUL

CSA Std C22.2

NEMA Types 1, 3, 3R,

4X, 12

DISCONNECT &CIRCUIT BREAKERSERIES

Wall Mount Enclosure16 x 10 to 36 x 30Industrial Control

System applications





6 UL/cUL

CSA Std C22.2

NEMA Types 1, 3, 3R,

4X, 12

XTRA DEEPSERIES Instrument Enclosure

6 x 4 to 20 x 16Extra Deep Cover





11 UL/cUL

CSA Std C22.2


12

KRYDON

SERIES

CATALOGSERIES

PRODUCT GROUP& SIZE MATERIALS

NUMBEROF SIZES

ENVIRONMENTALRATING

Cooper Crouse-Hinds has a full line of Krydon material enclosures. These solid, one-piececonstruction enclosures are made of a proprietary formulation of fiberglass reinforced polyester that hashigh impact strength, is fire retardant, heat resistant and withstands weathering.

Krydon enclosures are: Strong and durable while providing longer service life for equipment Class I, Division 2 Groups B,C,D rating on many Krydon products Are available in an expansive range of product groups Are available in hundreds of sizes and options

See page 32 and the Cooper Crouse-Hinds catalog for more information on Krydon material enclosures

Lift-off cover design with 4 cover screws Memory retaining continuous polyurethane gasket Captive stainless steel cover screws Chemical resistant fiberglass reinforced polyester Submersible, non-corrosive design Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with easeand accuracy

Rounded edges, minimal protrusions or exposed pocketareas for assembly of dust and debris

Smooth surface, no color variations, swirls or colorpockets, no voids

Hot compression molded fiberglass reinforced thermosetpolyester

Poured polyurethane seamless gasket provides water-tightdust-tight environmental seal

Captive stainless steel screws 304 stainless steel used on all external hardware

UL/cUL 50, Types 1, 3R, 4X, 6P, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3R, 4X, 6P, 12 NEMA Standard 250 - Types 1, 3R, 4X, 6P, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating

Standard Materials/Finishes

Certification & Compliances

The Cooper Crouse-Hinds Small Line Series offer a light-weight, compact, versatile solution for applications requiringtight or confined spaces. The Small Line Series houseseverything from terminal blocks to small positional control.Available in a choice of two body styles, these enclosuresare made of fiberglass reinforced polyester and have amemory retaining polyurethane gasket and stainless steelscrews for exceptional corrosion and chemical resistance.The Small Line Series will hold up under the most extremeconditions and provide protection in adverse environmentssuch as water, steam, vapor or chemicals.

Small Line Series - Ordering Information

4 Cover ScrewsWith a BeveledCover Design

FSJBS030302*FSJBS050302FSJBS060404FSJBS080302FSJBS080404FSJBS090302FSJBS110404FSJBS140302FSJBS170302

InsideH x W x D

4 Cover ScrewsWith a FlatCover Design

* Flat Cover** Available in: Aluminum (SA), Fiberglass (FG), Carbon Steel (CS), and Stainless Steel (SS)To order, add the suffix to the end of the part number

FSJBS

MountingPlate**

Features & Benefits

Mounting Feet kit available for field installation.Order part number FSJMTGFTKIT

Options

FSJS

3.13 x 3.03 x 2.705.38 x 3.03 x 2.876.00 x 3.19 x 3.637.82 x 3.03 x 2.878.26 x 3.19 x 3.638.75 x 3.03 x 2.8710.51 x 3.19 x 3.6313.19 x 3.03 x 2.8716.75 x 3.03 x 2.876.90 x 5.90 x 2.889.15 x 5.90 x 2.88

FMP0706FMP0906

FSJS070603FSJS090603


Small Line Series

Small Line Series - Dimensional Drawings

CATALOG OVERALL INSIDENUMBER H X W X D A X B X C I J K L M N WEIGHT

FSJBS030302 3.72 x 3.63 x 2.95 3.13 x 3.03 x 2.70 0 0 2.31 2.75 1.59 2.03 1 lbs.(95 x 92 x 75) (79 x 77 x 69) (0) (0) (59) (70) (40) (52)

FSJBS050302 5.97 x 3.63 x 3.14 5.38 x 3.03 x 2.87 4.72 2.38 4.56 2.75 3.84 2.03 1 lbs.(152 x 92 x 80) (137 x 77 x 73) (120) (61) (116) (70) (98) (52)









CATALOG OVERALL INSIDE MOUNTINGNUMBER H X W X D A X B X C E X F J K L M N WEIGHT

FSJS070603 7.63 x 6.63 x 3.19 6.90 x 5.90 x 2.88 5.37 x 5.63 2.48 5.3 4.25 4.52 4.9 3 lbs.(194 x 168 x 81) (175 x 150 x 73) (137 x 143) (63) (137) (108) (115) (124)

FSJS090603 9.87 x 6.63 x 3.19 9.15 x 5.90 x 2.88 7.62 x 5.63 2.48 7.62 4.25 6.77 4.9 3 lbs.(251 x 168 x 81) (232 x 150 x 73) (194 x 143) (63) (194) (108) (172) (124)

A

B

B

AH

W

SECTION A-A

S

D

N

B

C

SECTION B-B

A

M A

N

J

FRONT VIEWWITHOUT COVER

H

K

L

F

E

Small Line Series - FSJS Configuration Dimensions In Inches (mm)

Small Line Series - FSJBS Configuration Dimensions In Inches (mm)

The Cooper Crouse-Hinds Pushbutton Series offera solution for applications requiring an enclosure withmultiple pre-drilled openings for push buttons availablein 30mm and 22mm configurations. The notched keyholedesign and the ability to order up to 25 holes, makes thisversatile series a perfect match for your general purposeelectrical and control station applications. Available in achoice of two body designs, these enclosures are madeof fiberglass reinforced polyester and have a memoryretaining polyurethane gasket and stainless steel screwsfor exceptional corrosion and chemical resistance. ThePushbutton Series will hold up under the most extremeconditions and provide protection in adverse conditionssuch as water, steam, vapor or chemicals.



Captive stainless steel screws 304 stainless steel used on all external hardware Stainless steel beaded cover retention chain on theFPBM series

UL/cUL 50, Types 1, 3, 4X, 6P, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 4X, 6P, 12 NEMA Standard 250 - Types 1, 3, 4X, 6P, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating



Features & Benefits

Mounting Feet kit available for field installation.Order part number FSJMTGFTKIT

Options


Pushbutton Series

Lift-off cover design with 4 cover screws Memory retaining continuous polyurethane gasket Captive stainless steel cover screws Full metal grounding strap Notched key hole design Chemical resistant fiberglass reinforced polyester Submersible, non-corrosive design Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with easeand accuracy



Pushbutton Series Ordering Information

30mmPushbutton

Pushbutton Series - Dimensional Drawings

FPB FPB

6.00 x 3.19 x 3.636.00 x 3.19 x 3.638.26 x 3.19 x 3.6310.51 x 3.19 x 3.6313.19 x 3.03 x 2.8716.75 x 3.03 x 2.8716.75 x 3.03 x 2.87

FPB31FPB32FPB33FPB34FPB35FPB36FPB37

1234567

22mmPushbutton


* Available in: Aluminum (SA), Fiberglass (FG), Carbon Steel (CS), and Stainless Steel (SS)To order, add the suffix to the end of the part number

O

2.25 (57)

S

B

B

AA

HOLE DIA.4 PLC'S.

H

W

F

N

2.25(57)P

H I

W

J

AA

B

B

2.25

2.25

.

O

(57)

(57)

(

.190

.672 1.210

O

(5)

(17)(31)

D

B

N

SECTION A-A

AK

L


S

C

M A

B

SECTION B-B

S

SECTION A-A

S

DJ

B

L

SECTION B-BB

HEA

C

M

K


FPBM

5.72 x 5.72 x 4.457.73 x 5.74 x 4.459.73 x 7.73 x 3.989.73 x 7.73 x 3.9811.79 x 9.80 x 4.9411.79 x 9.80 x 4.9413.53 x 11.55 x 5.94

30mmMulti-HolePushbutton

FPBM34FPBM36FPBM39FPBM312FPBM316FPBM320FPBM325

46912162025

MountingPlate*

FMP0606FMP0806FMP1008FMP1008FMP1210FMP1210FMP1412

30mm 22mm

Multi-Hole

InsideH x W x D

InsideH x W x DHoles Holes

.190

.6721.210

(31)(17)

(5)

D

6.00 x 3.19 x 3.636.00 x 3.19 x 3.636.00 x 3.19 x 3.638.26 x 3.19 x 3.6310.51 x 3.19 x 3.6310.51 x 3.19 x 3.6313.19 x 3.03 x 2.87

InsideH x W x D

1.56

A

H I

W

J

AA

B

B

O

1.56

1.56

.

(40)

(40)

(40)

.875

.125

.468

(3)

(12)(22)

(

CATALOG OVERALL INSIDENUMBER H X W X D A X B X C I J K L M N O WEIGHT

FPB21 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 3.31 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (84)

FPB22 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 2.53 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (64)

FPB23 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 1.75 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (44)

FPB24 8.88 x 3.81 x 3.89 8.26 x 3.19 x 3.63 7.56 2.5 7.13 2.94 6.38 2.19 2.09 2 lbs.(225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56) (53)

FPB25 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.5 9.37 2.94 8.63 2.19 2.44 2 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (62)

FPB26 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.5 9.37 2.94 8.63 2.19 1.66 3 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (42)

FPB27 13.78 x 3.63 x 3.14 13.19 x 3.03 x 2.87 12.53 2.38 12.37 2.75 11.66 2.03 2.20 3 lbs.(350 x 92 x 80) (335 x 77 x 73) (318) (60) (314) (70) (296) (52) (56)

CATALOG OVERALL INSIDE MOUNTING HOLENUMBER H X W X D A X B X C E X F J K L M N O P DIA. WEIGHT

FPBM34 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 2.64 2.64 0.31 2.75 lbs.(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (67) (67) (8)

FPBM36 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 2.64 2.51 0.31 3.5 lbs.(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (67) (64) (8)

FPBM39 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 3.43 2.45 0.31 5 lbs.(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (87) (62) (8)

FPBM312 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 2.3 2.45 0.31 5 lbs.(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (58) (62) (8)

FPBM316 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 3.33 2.3 0.31 6.5 lbs.(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (85) (58) (8)



CATALOG OVERALL INSIDENUMBER H X W X D A X B X C I J K L M N O WEIGHT

FPB31 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 3.31 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (84)

FPB32 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 2.19 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (56)

FBP33 8.88 x 3.81 x 3.89 8.26 x 3.19 x 3.63 7.56 2.5 7.13 2.94 6.38 2.19 2.19 2 lbs.(225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56) (56)

FPB34 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.5 9.37 2.94 8.63 2.19 2.19 2 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (56)

FBP35 13.78 x 3.63 x 3.14 13.19 x 3.03 x 2.87 12.53 2.38 12.37 2.75 11.66 2.03 2.39 2 lbs.(350 x 92 x 80) (335 x 77 x 73) (318) (60) (314) (70) (296) (52) (61)

FBP36 17.35 x 3.63 x 3.14 16.75 x 3.03 x 2.87 16.1 2.38 15.94 2.75 15.22 2.03 3.05 3 lbs.(441 x 92 x 80) (426 x 77 x 73) (409) (60) (405) (70) (387) (52) (77)

FBP37 17.35 x 3.63 x 3.14 16.75 x 3.03 x 2.87 16.1 2.38 15.94 2.75 15.22 2.03 1.92 3 lbs.(441 x 92 x 80) (426 x 77 x 73) (409) (60) (405) (70) (387) (52) (49)

22mm Pushbutton Series - Configuration Dimensions In Inches (mm)


Pushbutton Series

Multi-Hole Pushbutton Series - Configuration Dimensions In Inches (mm)

30mm Pushbutton Series - Configuration Dimensions In Inches (mm)

The Cooper Crouse-Hinds Junction Box Seriesoffer an extensive selection to the industrial applicationrequiring a vast number of configurations and sizes.The Junction Box Series is available in 12 differentsizes, each offering a multitude of durable cover optionswith features such as stainless steel hinges, padlockcovers and windows. These enclosures are made offiberglass reinforced polyester and have a pouredpolyurethane seamless gasket that provides a water-tight and dust-tight environmental seal for exceptionalcorrosion and chemical resistance. The durableJunction Box Series will hold up under the mostextreme applications and provide protection andreliability in the most adverse conditions.

Hot compression molded fiberglass reinforcedthermoset polyester


Captive stainless steel screws 304 stainless steel used on all external hardware Molded in mounting flange Panel mounting capability for fixed rear panel Bosses utilize threaded brass inserts accepting10-32 screws

UL/cUL 50, Types 1, 3, 4X, 6P, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 4X, 6P, 12 NEMA Standard 250 - Types 1, 3, 4X, 6P, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Window flammability - UL94V-0 Non-flame propagating



Features & Benefits


Junction Box Series

Memory retaining continuous polyurethane gasket Captive stainless steel cover screws Chemical resistant fiberglass reinforced polyester Submersible, non-corrosive design Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with easeand accuracy



Stainless steel retention chain on screw cover series Full-length stainless steel hinges on the hinge cover series

2 Cover ScrewsWith a HingedCover

4 CoverScrews WithLift Off Cover

Hinged CoverWith a PadlockLatch

Hinged CoverWith a Window& Padlock Latch

2 Cover ScrewsWith a Hinged CoverWith Window

Fiberglass HingedCover Witha Window &Padlock Latch

Junction Box Series Ordering Information


Available with the deep cover option, please add a D to the part number. For example, FJDHS100804 Not available with a 6P rating

Junction Box Series - Dimensional Drawings

FJHSFJS FJHP FJHPW FJHSW FJFHPW

FJHS060404FJHS060604FJHS080604FJHS080804FJHS100804

FJHS121005FJHS121206FJHS140707FJHS141206FJHS161406FJHS181608

FJHS201608

5.84 x 3.85 x 4.455.72 x 5.72 x 4.457.73 x 5.74 x 4.457.73 x 7.73 x 4.829.73 x 7.73 x 3.9811.79 x 9.80 x 4.9411.70 x 11.70 x 6.2914.00 x 7.00 x 6.5613.53 x 11.55 x 5.9415.63 x 13.60 x 5.9417.69 x 15.69 x 8.4519.72 x 15.72 x 8.45

FJS060404FJS060604FJS080604FJS080804FJS100804FJS121005FJS121206FJS140707FJS141206FJS161406FJS181608

FJS201608

FJHP060404FJHP060604FJHP080604FJHP080804FJHP100804FJHP121005FJHP121206FJHP140707FJHP141206FJHP161406FJHP181608

FJHP201608

FJHPW060404FJHPW060604FJHPW080604FJHPW080804FJHPW100804FJHPW121005FJHPW121206FJHPW140707FJHPW141206FJHPW161406FJHPW181608

FJHPW201608

FJHSW060404FJHSW060604FJHSW080604FJHSW080804FJHSW100804FJHSW121005FJHSW121206FJHSW140707FJHSW141206FJHSW161406FJHSW181608

FJHSW201608

FJFHPW080604FJFHPW080804FJFHPW100804FJFHPW121005FJFHPW121206FJFHPW140707FJFHPW141206FJFHPW161406FJFHPW181608

FJFHPW201608

MountingPlate*

FMP0604FMP0606FMP0806FMP0808FMP1008FMP1210FMP1212FMP1407FMP1412FMP1614FMP1816

FMP2016

A

B

B

A

F

W

N

HOLE DIA.4 PLC'S.

M

DJ

B

L

K


HE

C

A

M

SECTION B-B

A

HE

C

A

M

Standard Flat Cover Deep Cover


Junction Box Series

InsideH x W x D

SECTION A-A

S

CATALOG OVERALL INSIDE WINDOW MOUNTING HOLENUMBER H X W X D A X B X C AREA E X F J K L M N DIA. WEIGHT

7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 4.25 x 2.25 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs.(191 x 138 x 121) (148 x 98 x 113) (108 x 57) (171 x 51) (101) (108) (57) (6) (188) (8)



9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs.(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (222 x 152) (103) (159) (159) (6) (238) (8)

11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs.(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)

11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs.(295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)

13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs.(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)

13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.2 lbs.(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (324 x 254) (140) (260) (260) (6) (340) (8)

15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs.(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)




22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 lbs(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)

FJS060404FJHS060404FJHP060404FJHPW060404FJHSW060404FJS060604FJHS060604FJHP060604FJHPW060604FJHSW060604FJS080604FJHS080604FJHP080604FJHPW080604FJHSW080604FJFHPW080604FJS080804FJHS080804FJHP080804FJHPW080804FJHSW080804FJFHPW080804FJS100804FJHS100804FJHP100804FJHPW100804FJHSW100804FJFHPW100804

FJDS100804*FJDHS100804*FJDHP100804*FJDHPW100804*FJDHSW100804*FJDFHPW100804*

FJS121005FJHS121005FJHP121005FJHPW121005FJHSW121005FJFHPW121005




FJS161406FJHS161406FJHP161406FJHPW161406FJHSW161406FJFHPW161406FJS181608FJHS181608FJHP181608FJHPW181608FJHSW181608FJFHPW181608FJS201608FJHS201608FJHP201608FJHPW201608FJHSW201608FJFHPW201608

*Deep cover center of cover raised 3/4" Cooper-Crouse Hinds Fiberglass Enclosures 13

Junction Box Series - Configuration Dimensions In Inches (mm)

The Cooper Crouse-Hinds Raised Cover Series offera solution for applications requiring an enclosure witha raised or deeper cover. The deeper cover issuitable for panel mounting and for use as an operatorinterface in industrial equipment control stations whenrequired. The deeper cover allows every cubic inch ofvaluable internal enclosure space to be used. Theseenclosures are made of fiberglass reinforced polyesterand have a poured polyurethane seamless gasket thatprovides a water-tight and dust-tight environmentalseal for exceptional corrosion and chemical resistance.The Raised Cover Series will hold up under the mostextreme applications and provide protection andreliability in high-end electronics applications, harshcorrosive environments, and industrial applicationsboth indoors and out.



Captive stainless steel screws 304 stainless steel used on all external hardware Molded in mounting flange Panel mounting capability for fixed rear panel Bosses utilize threaded brass inserts accepting10-32 screws

UL/cUL 50, Types 1, 3, 4X, 6P, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 4X, 6P, 12 NEMA Standard 250 - Types 1, 3, 4X, 6P, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating



Features & Benefits


Raised Cover Series

Memory retaining continuous polyurethane gasket Molded in mounting flange Captive stainless steel cover screws Chemical resistant fiberglass reinforced polyester Submersible, non-corrosive design Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with easeand accuracy



Raised Cover Series Ordering Information

Raised Cover Series - Dimensional Drawings

FRCJS FRCJHS FRCJHP


4 Cover ScrewsWith Lift Off Cover

FRCJS060406FRCJS060606FRCJS080606FRCJS080805FRCJS100806FRCJS121006FRCJS121208FRCJS141208FRCJS161408FRCJS181610FRCJS201610

2 Cover ScrewsWith a Hinged Cover

FRCJHS060406FRCJHS060606FRCJHS080606FRCJHS080805FRCJHS100806FRCJHS121006FRCJHS121208FRCJHS141208FRCJHS161408FRCJHS181610FRCJHS201610

FRCJHP060406FRCJHP060606FRCJHP080606FRCJHP080805FRCJHP100806FRCJHP121006FRCJHP121208FRCJHP141208FRCJHP161408FRCJHP181610FRCJHP201610

Hinged CoverWith a Padlock Latch

MountingPlate*


A

B

B

A

SECTION B-B

F

W

N E

HOLE DIA.4 PLC'S.

M

C

AO H


L

K



SECTION A-A

S

D

B

J

P

InsideH x W x D

7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs.(191 x 139 x 158) (148 x 98 x 151) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)

7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs.(191 x 191 x 158) (145 x 145 x 151) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)

9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs.(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)

9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 4 lbs.(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)

11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs.(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)

13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs.(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)

13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 7.4 lbs.(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)

15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs.(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)

17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs.(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)

19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs.(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)

22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs.(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)

FRCJS060406FRCJHS060406FRCJHP060406












Raised Cover Series

CATALOG OVERALL INSIDE MOUNTING HOLENUMBER H X W X D A X B X C E X F J K L M N O P DIA. WEIGHT

Raised Cover Series - Configuration Dimensions In Inches (mm)

Cooper-Crouse Hinds Fiberglass Enclosures 17

The Cooper Crouse-Hinds Xtra Deep Series offer asolution for applications requiring an extra deep enclosure.The deep, durable enclosure has nearly equal capacity inboth the cover and the base, giving you ample room foryour cover or mounting plate components. The fiberglassreinforced polyester enclosure with flange mount base,stainless steel hardware and poured polyurethane seam-less gasket provides exceptional corrosion and chemicalresistance in a water-tight and dust-tight environmentalseal. The Xtra Deep Series will hold up under the mostextreme applications and provide protection and reliabilityin high-end electronics applications, harsh corrosiveenvironments, and industrial applications bothindoors and out.

Hot compression molded fiberglass reinforcedthermoset polyester


304 stainless steel used on all external hardware Molded in mounting flange Panel mounting capability for fixed rear panel Bosses utilize threaded brass inserts accepting10-32 screws

UL/cUL 50, Types 1, 3, 4X, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 4X, 12 NEMA Standard 250 - Types 1, 3, 4X, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating


Certification & CompliancesFeatures & Benefits

Xtra Deep Series

Xtra Deep Series - Ordering Information


PadlockableTwist Latch

FXDJ060408FXDJ060608FXDJ080608FXDJ080808FXDJ100808FXDJ121010FXDJ121212FXDJ141212FXDJ161412FXDJ181617FXDJ201617

MountingPlate*


FXDJ

* Available in: Aluminum (SA), Fiberglass (FG), Carbon Steel (CS),and Stainless Steel (SS)To order, add the suffix to the end of the part number

Memory retaining continuous polyurethane gasket Integral mounting flange Molded in panel mounting inserts Chemical resistant fiberglass reinforced polyester Non-corrosive design Full length Stainless Steel hinge Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with easeand accuracy



InsideH x W x D

[email protected]

Xtra Deep Series

18 Cooper-Crouse Hinds Fiberglass Enclosures

Xtra Deep Series Dimensional Drawings

CATALOG OVERALL INSIDE MOUNTING HOLENUMBER H X W X D A X B X C E X F J K L M N DIA. WEIGHT

FXDJ060408 7.50 x 4.94 x 9.07 5.84 x 3.85 x 8.81 6.75 x 2.00 8.36 4.25 2.25 0.25 6.89 0.31 3 lbs.(190 x 125 x 230) (148 x 98 x 224) (171 x 51) (212) (108) (57) (6) (175) (8)






FXDJ121212 13.56 x 12.84 x 12.37 11.70 x 11.70 x 12.12 12.75 x 10.00 11.54 10.25 10.25 0.25 12.84 0.31 9 lbs.(344 x 326 x 314) (297 x 297 x 308) (324 x 254) (293) (260) (260) (6) 326) (8)

FXDJ141212 15.50 x 12.83 x 12.06 13.50 x 11.55 x11.81 14.62 x 10.00 11.23 12.25 10.25 0.25 14.88 0.31 12 lbs.(394 x 326 x 306) (343 x 293 x 300) (371 x 254) (285) (311) (260) (6) (378) (8)




[email protected]

Xtra Deep Series

Xtra Deep Series - Configuration Dimensions In Inches (mm)

The Cooper Crouse-Hinds Advantage Series offer is our most extensive selec-tion of durable industrial non-metallic boxes. Available in a wide range of options,the Advantage Series is available in over 36 various configurations with optionssuch as stainless steel hinges or stainless steel pull latches each with or withoutclear covers. These enclosures are made of fiberglass reinforced polyester andhave a poured polyurethane seamless gasket that provides a water-tight and dust-tight environmental seal for exceptional corrosion and chemical resistance. Theresilient Advantage Series will provide high impact resistance in the most extremeconditions and provide protection and reliability in the most adverse applications.



304 stainless steel used on all external hardware Panel mounting capability for fixed rear panel Bosses utilize threaded brass inserts accepting 10-32 screws

UL/cUL 50, Types 1, 3, 3S, 4X, 12, 13, UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 3S, 4X, 12, 13 NEMA Standard 250 - Types 1, 3, 3S, 4X, 12, 13 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating IP66



Features & Benefits

Mounting Feet kit available for field installation.Order part number FAMTGFTKIT

Options

Advantage Series Ordering Information

FAHS FAHP FAHPCC

7.41 x 7.79 x 4.319.41 x 7.79 x 4.319.39 x 9.76 x 4.3111.42 x 9.79 x 6.3113.45 x 11.83 x 6.3115.49 x 13.86 x 6.3415.49 x 13.86 x 8.3417.58 x 15.96 x 8.3419.77 x 18.15 x 10.3421.79 x 18.16 x 10.34

2 Cover ScrewsWith a HingedCover

FAHS060604FAHS080604FAHS080804FAHS100806FAHS121006FAHS141206FAHS141208FAHS161408FAHS181610FAHS201610

Hinged CoverWith a PadlockLatch

FAHP060604FAHP080604FAHP080804FAHP100806FAHP121006FAHP141206FAHP141208FAHP161408FAHP181610FAHP201610

2 Cover ScrewsWith a ClearHinged Cover

FAHSCC060604FAHSCC080604FAHSCC080804FAHSCC100806FAHSCC121006FAHSCC141206FAHSCC141208FAHSCC161408

Hinged ClearCover With aPadlock Latch

FAHPCC060604FAHPCC080604FAHPCC080804FAHPCC100806FAHPCC121006FAHPCC141206FAHPCC141208FAHPCC161408

Cover Panel WithMounting Hardware

FACP0606SAFACP0806SAFACP0808SAFACP1008SAFACP1210SAFACP1412SAFACP1412SAFACP1614SAFACP1816SAFACP2016SA

MountingPlate

FMP0606FMP0806FMP0808FMP1008FMP1210FMP1412FMP1412FMP1614FMP1816FMP2016


Advantage Series

FACP

Memory retaining continuous polyurethane gasket No penetrating hardware Chemical resistant fiberglass reinforced polyester Non-corrosive design Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with easeand accuracy



InsideH x W x D

FAHSCC

Advantage Series - Configuration Dimensions In Inches (mm)CATALOG OVERALL INSIDE MOUNTING OPT. MOUNTINGNUMBER H x W x D A x B x C P X R K L S T FEET E X F N J M WEIGHT

7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 0.38 8.24 x 4.00 9.02 4.56 0.25 2.5 lbs(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)








19.77 x 18.15 x10.34 18.63x16.63 x10.06 17.94 x 14.00 16.25 14.25 9.60 0.38 20.24 x 14.00 21.02 10.59 0.25 16.0 lbs(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)

21.79 x18.16 x 10.34 20.63 x16.63 x10.06 19.96 x 14.00 18.25 14.25 9.59 0.38 22.26 x 14.00 23.04 10.59 0.25 17.5 lbs

FAHS060604FAHP060604FAHSCC060604FAHPCC060604








FAHS181610FAHP181610

(553.5 x 461.2 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) ( 463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)FAHS201610FAHP201610

Advantage Series Dimensional Drawings


Advantage Series

The Cooper Crouse-Hinds Wall Mount and LargeFiberglass Enclosure Series offer a solution forapplications requiring a large enclosure especially suitedfor indoor or outdoor use and to provide protectionagainst falling dirt, rain, sleet, snow, and windblown dust.The fiberglass reinforced polyester Wall Mount Series isavailable in NEMA 3R and 4X configurations and thepoured polyurethane seamless gasket provides a water-tight and dust-tight environmental seal for exceptionalcorrosion and chemical resistance.

Hot compression molded fiberglass reinforced polyesterhand layup FRP


304 stainless steel used on all external hardware Bosses utilize threaded brass inserts accepting10-32 screws

33RR SSeerriieess UL/cUL 50, Types 1, 3R UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3R NEMA Standard 250 - Types 1, 3R Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating

44XX SSeerriieess UL/cUL 50, Types 1, 3, 3R, 4X, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 3R, 4X, 12 NEMA Standard 250 - Types 1, 3, 3R, 4X, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating

LLaarrggee FFiibbeerrggllaassss UL/cUL 50, Types 1, 3, 3R, 4X, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 3R, 4X, 12 NEMA Standard 250 - Types 1, 3, 3R, 4X, 12 IP55 & IP66 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating



Features & Benefits


Wall Mount & Large Fiberglass Enclosure Series

Memory retaining continuous polyurethane gasket Light weight Integral mounting feet Molded in panel mounting inserts Stainless Steel full length continuous hinge Built in padlock hasp Chemical resistant fiberglass reinforced polyester Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Rain shield protection against incidental wateringress for NEMA 3R enclosures

Material cuts, drills, punches, and saws with ease and accuracy



Wall Mount & Large Fiberglass Enclosure Series Ordering Information

15.92 x 10.27 x 8.5319.70 x 16.04 x 13.2424.00 x 12.87 x 7.3324.00 x 12.87 x 11.3324.05 x 20.39 x 9.2524.05 x 24.39 x 11.2524.05 x 24.39 x 13.2529.90 x 20.14 x 7.2329.90 x 20.14 x 9.2329.90 x 20.14 x 11.2329.90 x 20.14 x 13.2330.46 x 25.47 x 8.1230.46 x 25.47 x 11.2730.46 x 25.47 x 13.1036.31 x 31.69 x 9.3636.31 x 31.69 x 11.3636.31 x 31.69 x 13.36

F4WMSHL161007F4WMSHL201612F4WMSHL241206F4WMSHL241210F4WMSHL242008F4WMSHL242410F4WMSHL242412F4WMSHL302006F4WMSHL302008F4WMSHL302010F4WMSHL302012F4WMSHL302407F4WMSHL302410F4WMSHL302412F4WMSHL363008F4WMSHL363010F4WMSHL363012

Stainless Steel Hinged,Latched Down Cover

NEMA 4XF4WMSHL

F4LSHL483612F4LSHL483616F4LSHL603612F4LSHL603616F4LSHLDD364812F4LSHLFS722525F4LSHLFSDD724925


48.33 x 36.22 x 13.2548.33 x 32.22 x 17.2560.62 x 36.13 x 13.4460.62 x 36.13 x 17.4436.12 x 48.12 x 13.0072.00 x 25.00 x 25.8872.00 x 49.00 x 25.88

Large FiberglassF4LSHL

FMPWM1610FMPWM2016FMPWM2412FMPWM2412FMPWM2420FMPWM2424FMPWM2424FMPWM3020FMPWM3020FMPWM3020FMPWM3020FMPWM3024FMPWM3024FMPWM3024FMPWM3630FMPWM3630FMPWM3630

MountingPlate*

FMPWM4836FMPWM4836FMPWM6036FMPWM6036FMPWM3648FMPWM7225FMPWM7249

MountingPlate*

F3WMSHL201606F3WMSHL242410F3WMSHL302008F3WMSHL302010F3WMSHL302410F3WMSHL302412F3WMSHL363008F3WMSHL363010F3WMSHL363012F3WMSHL483612F3WMSHL483616



FMPWM2016FMPWM2424FMPWM3020FMPWM3020FMPWM3024FMPWM3024FMPWM3630FMPWM3630FMPWM3630FMPWM4836FMPWM4836

Mounting Plate*

NEMA 3RF3WM



InsideH x W x D

InsideH x W x D

InsideH x W x D


3R 4XSTAINLESS STEEL STAINLESS STEEL

HINGE HINGE

161007 2 2

201606

201612

241206

241210

242008 2 4

242410

242412

302006

302008

302010

302012

302407

302410 2 5

302412

363008

363010 3 5

363012

483612

483616

2 2

2 4

2 5

3 10

INSIDEENCLOSUREDIMENSIONS

2 2

Number of Latches

CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENINGNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT

F4WMSHL161007 18.75 x 10.96 x 9.03 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs.(476 x 278 x 229) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)

F4WMSHL201612 22.75 x 16.87 x 13.77 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs.(578 x 429 x 350) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)
















Wall Mount Series - NEMA 4X Configuration Dimensions In Inches (mm)

Wall Mount & Large Fiberglass Enclosure Series Dimensional Drawings

A

B

B

A

L

B

N

KA

SECTION A-A

C

SECTION B-B

DF

W

EH M

J

AutoCad File: NBOX1

A

B

B

A

L

B

N

KA

SECTION A-A

C

SECTION B-B

DF

W

EH M

J

AutoCad File: NBOX1

A

B

B

A

L

B

N

KA

SECTION A-A

C

SECTION B-B

DF

W

EH M

J

AutoCad File: NBOX1


CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING NUMBER H X W X D A X B X C E X F J K L M X N WEIGHT



F3WMSHL302008 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. (835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)







Wall Mount Series - NEMA 3R Configuration Dimensions In Inches (mm)

CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING NUMBER H X W X D A X B X C E X F J K L M X N

F4LSHL483612* 51.29 x 36.62 x 13.93 48.33 x 36.22 x 13.25 50.12 x 28.50 12.25 21.63 31.25 45.25 x 32.00(1303 x 930 x 354) (1228 x 920 x 336) (1273 x 724) (311) (549) (794) (1149 x 813)




F4SHLDD364812 39.50 x 48.50 x 13.62 36.12 x 48.12 x 13.00 38.25 x 40.5 11.94 14.50 20.00 32.00 x 20.75(1003 x 1232 x 346) (917 x 1222 x 330) (972 x 1029) (303) (368) (508) (813 x 527)

F4SHLFS722525 72.50 x 25.50 x 26.38 72.00 x 25.00 x 25.88 24.88 15.50 19.00 64.75 x 21.00(1841 x 648 x 492) (1829 x 635 x 657) (632) (388) (483) (1645 x 533)

F4LSHLFSDD- 72.50 x 49.50 x 26.38 72.00 x 49.00 x 25.88 24.88 15.50 20.00 64.75 x 21.00724925 (18.42 x 1257 x 670) (1829 x 1245 x 654) (628) (394) (508) (1645 x 533)

WEIGHT

146 lbs.

164 lbs.

177 lbs.

198 lbs.

146 lbs.

226 lbs.

350 lbs.

Large Fiberglass Enclosures Series - Configuration Dimensions In Inches (mm)



F3WMSHL483612 51.29 x 36.62 x 13.93 48.33 x 36.22 x 13.25 50.12 x 28.50 12.25 21.63 31.25 45.25 x 32.00 (1303 x 930 x 354) (1228 x 920 x 336) (1273 x 724) (311) (549) (794) (1149 x 813)

F3WMSHL483616 51.29 x 36.62 x 17.93 48.33 x 32.22 x 17.25 50.12 x 28.50 16.25 21.63 31.25 45.25 x 32.00(1303 x 930 x 456) (1228 x 920 x 438) (1273 x 724) (413) (549) (794) (1149 x 813)

146 lbs.

164 lbs.

* F4LSHL483612, F4LSHL483616, F4LSHL603612 and F4LSHL603616 reflective of the above chart

Wall Mount Series/ NEMA 3R Chart reflects the Dimensional Drawings from the previous page

NEMA 3R Dimensional DrawingF3WMSHL483612 and F3WMSHL483616


F4LSHDD364812

Wall Mount & Large Fiberglass Enclosures Series Dimensional Drawings

J J

J

F4LSHLFS722525

F4LSHLFSDD724925


Hot compression molded fiberglass reinforced thermoset polyester

Poured polyurethane seamless gasket 304 stainless steel used on all external hardware Panel mounting capability for fixed rear panel Bosses utilize threaded brass inserts

UL/cUL 50, Types 1, 3, 3R, 4X, 12 UL File Number E57656 CSA Std C22.2 - File 244248 Types 1, 3, 3R, 4X, 12 NEMA Standard 250 - Types 1, 3, 3R, 4X, 12 Temperature Range - (-76F to +250F) (-60C to +120C) Flammability Rating - UL94-5V Non-flame propagating


Certification & CompliancesFeatures & Benefits

Disconnect & Circuit Breaker Series -

16 x 10 x 820 x 16 x 924 x 12 x 1124 x 24 x 1130 x 24 x 1136 x 30 x 11

Disconnect

FDC161008FDC201608FDC241212FDC242412FDC302412FDC363012

MountingPlate*

FMPC1610FMPC2016FMPC2412FMPC2424FMPC3024FMPC3630

FDC


Disconnect and Circuit Breaker Series

Ordering Information

Integral mounting feet Stainless Steel full length continuous hinge Padlockable in off position Lightweight Memory retaining continuous polyurethane gasket Molded in panel mounting inserts Chemical resistant fiberglass reinforced polyester Non-corrosive design Environmentally sealed Type 4X disconnect handle Water-tight, dust-tight Non-conductive, impact resistant, UV resistant Material cuts, drills, punches, and saws with ease and accuracy



The Cooper Crouse-Hinds Disconnect and CircuitBreaker Series are used in larger industrial control systems and machine tool control panels where a disconnect is desirable in extreme environmental conditions. This durable NEMA 4X rated enclosure provides protection from falling dirt, rain, sleet, snow,windblown dust, splashing water, and hose-directedwater; and will be undamaged by the external formationof ice on the enclosure. The poured polyurethane seamless gasket and fiberglass reinforced polyester enclosure provides exceptional corrosion and chemicalresistance in adverse conditions.

InsideH x W x D


OPENINGCATALOG OVERALL INSIDE MOUNTING ENCLOSURENUMBER H X W X D A X B X C E X F J K L M X N O WEIGHT

FDC161008 18.75 x 10.96 x 10.25 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 3.50 13 lbs.(476 x 278 x 260) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152) (89)

FDC201608 22.75 x 16.87 x 11.00 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 3.50 23 lbs.(578 x 429 x 279) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310) (89)





Disconnect & Circuit Breaker Series - Configuration Dimensions In Inches (mm)

Disconnect & Circuit Breaker Series Dimensional Drawings

SECTION A-A

SECTION B-B

AutoCad File: CBOX1

W

F

H E M

D

N

L

B

A

J

C

O

A A

B

B

K

SECTION A-A

SECTION B-B

AutoCad File: CBOX1

W

F

H E M

D

N

L

B

A

J

C

O

A A

B

B

K

SECTION A-A

SECTION B-B

AutoCad File: CBOX1

W

F

H E M

D

N

L

B

A

J

C

O

A A

B

B

K


*Disconnect, fuse block, breaker, yoke, switches, or other internal components are not furnished with enclosure.


Cooper-Crouse Hinds Fiberglass Enclosure Accessories

CHCI21Radius of Protection: 2 ft.Normal Life Span: 1 yr.

FPLG1KIT 1/2 Dia. Hole5/8 Dia. Hole3/4 Dia. Hole

.50 - .56

.63 - .69

.75 - .81

FPLG2KIT 22mm PB, 1/2 Conduit 3/4 Conduit30mm PB

.88 - 1.00

1.06 - 1.121.22 - 1.28

FPLG3KIT 1 Conduit1 1/4 Conduit

1.38 - 1.501.69 - 1.75

FPLG4KIT 1 1/2 Conduit2 Conduit

2.00 - 2.122.50 - 2.56

FPLG5KIT 2 1/2 Conduit 3.00

FPLG6KIT 3 Conduit 3.62

FPLG7KIT 3 1/2 Conduit 4.12

FPLG8KIT 4 Conduit 4.62

CHSS2PKCHSS4PK

CHHANDLECHLP1CHLPKIT

CHENCAP2PKCHENCAP4PK

CHDV - Drain Vent CHDVKIT - Drain Vent Kit CHDVKIT4X -Drain Vent Kit 4X

CHBVKIT4X - Breather Vent Kit 4X

Encapsulated Screws Louver Plate Vent Carrying Handle

Stainless Steel Screws Corrosion Inhibitor

Fiberglass Hole PlugAssembly

CATALOG NUMBER FITS

HOLE DIA. RANGE

CATALOG NUMBER FITS

HOLE DIA. RANGE

Drain & Breather Vent


BKBA

End View (Formed)

BT

HOLE

DIA.

BL

BB

End View (Flat)

"BL" IS LESS THAN 31.25"OMIT CENTER HOLES WHEN

OMIT CENTER HOLES WHEN"BK" IS LESS THAN 29"

BKBA

End View (Formed)

BT

HOLE

DIA.

BL

BB

End View (Flat)

"BL" IS LESS THAN 31.25"OMIT CENTER HOLES WHEN

OMIT CENTER HOLES WHEN"BK" IS LESS THAN 29"

Only Available Panel Weight Fits Typicalin Carbon Thickness Panel Hole # of (Carbon Steel) EnclosureSteel (CS) BA BB BK BL BT Type Dia. Holes Suffix: CS Size

FMPC1610 13.00 8.50 12.00 7.50 0.08 Flat 0.31 4 3.3 lbs. 16 x 10 (330) (216) (305) (191) (2) (8) Disconnect

enclosure

FMPC2016 16.88 13.38 15.25 11.25 0.13 Formed 0.31 4 7.3 lbs. 20 x 16 (429) (340) (387) (286) (2) (8) Disconnect

enclosure

FMPC2412 20.88 9.38 19.25 7.25 0.13 Formed 0.50 4 6.5 lbs. 24 x 12 (530) (238) (489) (184) (2) (13) Disconnect

enclosure

FMPC2424 20.88 21.38 19.25 19.25 0.13 Formed 0.50 4 14 lbs. 24 x 24 (530) (543) (489) (489) (2) (13) Disconnect

enclosure


enclosure


enclosure

Mounting Plates for Disconnect & Circuit Breaker Dimensions CS

Aluminum (SA)Back PanelsGrade Aluminum 3003 H14 - No Finish

Stainless Steel (SS)Back PanelsStainless Steel Grade 304

Fiberglass (FG)Back Panels All FG Back PanelsUL 94 V-0 Rated

Carbon Steel (CS)Back Panels Carbon Steel Grade 1010 HRS - Painted White Enamel

Fiberglass Enclosure Mounting Plate Options


CATALOG BA BB BK BL BT BT PANEL HOLE # OF Weight Weight NUMBER (SA) (CS) TYPE DIA. HOLES (Aluminum) (Carbon Steel)

Suffix: SA Suffix: CS

FMPWM1610SA 13.00 8.50 12.00 7.50 0.090 0.105 Flat 0.31 4 1 lb 3.3 lbsFMPWM1610CS (330) (216) (305) (191) (2) (3) (8)

FMPWM2016SA 17.00 13.00 15.25 11.25 0.090 0.105 Flat 0.50 4 2 lbs 6.7 lbsFMPWM2016CS (432) (330) (387) (286) (2) (3) (13)

FMPWM2412SA 21.00 9.00 19.25 7.25 0.090 0.105 Flat 0.50 4 4.5 lbs 8.7 lbsFMPWM2412CS (533) (229) (489) (184) (2) (3) (13)

FMPWM2420SA 21.00 17.00 19.25 15.25 0.13 0.105 Flat 0.50 4 5 lbs 10.8 lbsFMPWM2420CS (533) (432) (489) (387) (3) (3) (13)

FMPWM2424SA 21.00 21.00 19.25 19.25 0.13 0.105 Flat 0.50 4 5.5 lbs 13.4 lbsFMPWM2424CS (533) (533) (489) (489) (3) (3) (13)

FMPWM3020SA 27.00 17.00 25.25 15.25 0.13 0.105 Flat 0.50 4 5.8 lbs 14 lbsFMPWM3020CS (686) (432) (641) (387) (3) (3) (13)

FMPWM3024SA 27.00 21.00 25.25 19.25 0.13 0.105 Flat 0.50 4 7 lbs 17 lbsFMPWM3024CS (686) (533) (641) (489) (3) (3) (13)


FMPWM3636SA 31.00 33.00 29.00 31.00 0.13 0.105 Formed 0.50 6 13 lbs 33 lbsFMPWM3636CS (787) (838) (737) (787) (3) (3) (13)







Mounting Plates for the NEMA 3R, NEMA 4X & Large Fiberglass Enclosure Dimensions


CATALOG BA BB BK BL BT BT BT BT PANEL HOLE # OF Weight Weight Weight Weight NUMBER (SA) (FG) (SS) (CS) TYPE DIA. HOLES (Aluminum) (Fiberglass) (Stainless) (Carbon Steel)

Suffix: SA Suffix: FG Suffix: SS Suffix: CS

4.88 2.88 4.25 2.25 0.080 0.125 0.060 0.075 Flat 0.25 4 2 oz. 2 oz. 5 oz. 5 oz.(124) (73) (108) (57) (2) (3) (2) (2) (6)

4.88 4.88 4.25 4.25 0.080 0.125 0.060 0.075 Flat 0.25 4 3 oz. 3 oz. 8 oz. 8 oz.(124) (124) (108) (108) (2) (3) (2) (2) (6)

6 4.88 5.38 4.25 0.080 0.125 0.060 0.075 Flat 0.25 4 4 oz. n/a n/a 10 oz.(152) (124) (137) (108) (2) (3) (2) (2) (6)

6.88 4.88 6.25 4.25 0.080 0.125 0.060 0.075 Flat 0.25 4 4 oz. 4 oz. 12 oz. 12 oz.(175) (124) (159) (108) (2) (3) (2) (2) (6)

6.88 6.88 6.25 6.25 0.080 0.125 0.060 0.075 Flat 0.25 4 5 oz. 5 oz. 15 oz. 15 oz.(175) (175) (159) (159) (2) (3) (2) (2) (6)

8.25 4.88 7.63 4.25 0.080 0.125 0.060 0.075 Flat 0.25 4 5 oz. n/a n/a 14 oz.(210) (124) (194) (108) (2) (3) (2) (2) (6)

8.88 6.88 8.25 6.25 0.080 0.125 0.060 0.075 Flat 0.25 4 8 oz. 8 oz. 19 oz. 21 oz.(225) (175) (210) (159) (2) (3) (2) (2) (6)

10.88 8.88 10.25 8.25 0.080 0.125 0.060 0.075 Flat 0.25 4 12 oz. 14 oz. 30 oz. 33 oz.(276) (225) (260) (210) (2) (3) (2) (2) (6)

10.88 10.88 10.25 10.25 0.080 0.125 0.060 0.075 Flat 0.25 4 16 oz. 18 oz. 37 oz. 38 oz.(276) (276) (260) (260) (2) (3) (2) (2) (6)

12.88 5.88 12.25 5.25 0.080 0.125 0.060 0.075 Flat 0.25 4 14 oz. 14 oz. 32 oz. 34 oz.(327) (149) (311) (133) (2) (3) (2) (2) (6)

12.88 10.88 12.25 10.25 0.080 0.125 0.060 0.075 Flat 0.25 4 18 oz. 20 oz. 45 oz. 48 oz.(327) (276) (311) (260) (2) (3) (2) (2) (6)

14.88 12.88 14.25 12.25 0.080 0.125 0.060 0.075 Flat 0.25 4 24 oz. 23 oz. 60 oz. 66 oz.(378) (327) (362) (311) (2) (3) (2) (2) (6)

16.88 14.88 16.25 14.25 0.080 0.125 0.060 0.075 Flat 0.25 4 31 oz. 32 oz. 88 oz. 87 oz.(429) (378) (413) (362) (2) (3) (2) (2) (6)

18.88 14.88 18.25 14.25 0.080 0.125 0.060 0.075 Flat 0.25 4 36 oz. 34 oz. 98 oz. 97 oz.(479) (378) (463) (362) (2) (3) (2) (2) (6)

FMP0604SAFMP0604FGFMP0604SSFMP0604CS














Mounting Plates for the FSJ, FPB, FJ, FRCJ, FXDJ, FA Series Enclosures



PART A B C D PANEL PANEL HOLE # OFNUMBER THK. TYPE DIA. HOLES

FACP0606SA 5.64 5.64 5.02 5.02 0.080 Flat 0.25 4

(143) (143) (127) (127) (2) (6)

FACP0806SA 7.68 5.64 7.05 5.02 0.080 Flat 0.25 4

(195) (143) (179) (127) (2) (6)

FACP0808SA 7.68 7.68 7.05 7.05 0.080 Flat 0.25 4

(195) (195) (179) (179) (2) (6)

FACP1008SA 9.71 7.71 9.08 7.08 0.080 Flat 0.25 4

(247) (196) (231) (180) (2) (6)

FACP1210SA 11.74 9.74 11.12 9.12 0.080 Flat 0.25 4

(298) (247) (282) (232) (2) (6)

FACP1412SA 13.78 11.78 13.15 11.15 0.080 Flat 0.25 4

(350) (299) (334) (283) (2) (6)

FACP1614SA 15.81 13.81 15.18 13.18 0.080 Flat 0.25 4

(402) (351) (386) (334) (2) (6)

FACP1816SA 17.94 15.94 17.31 15.31 0.080 Flat 0.25 4

(456) (405) (440) (389) (2) (6)

FACP2016SA 19.76 15.76 19.13 15.13 0.080 Flat 0.25 4

(502) (400) (486) (384) (2) (6)

Note: Cover panel kit includes cover panel and mounting hardware.

Krydon Series

Cooper Crouse-Hinds has a full line of Krydon material enclosures. Krydon is the tradename for the Cooper Crouse-Hinds proprietary formulation of fiberglass reinforced polyester. It is specifically formulated for electrical products intended for use in the harshest corrosive environments. Krydon material has proven itself superior to other materials used in corrosive environments.

These Krydon material enclosures have high impact strength, are fire retardant/heat resistant and withstand weathering. Most enclosures have a Class I, Division 2 rating, and are water-tight, dust-tight and weatherproof - even over extended periods of time.

Krydon Enclosures are available in the following product groups: Control Stations Alarm Stations Combination Line Starters Manual Motor Starters and Switches Manual Line Starters Magnetic Line Starters Circuit Breakers and Enclosures Panelboards Disconnect Switches Enclosed Heavy Duty Switches Junction Boxes Instrument Enclosures

Sizes range from: 3 x 3 through 26 x 24See the Cooper Crouse-Hinds catalog for more information on Krydon material enclosures

Cover Panel Dimensions

Cooper-Crouse Hinds Fiberglass Enclosures 33

Custom Built Solutions for Fast Delivery

For more than 110 years, Cooper Crouse-Hinds has exceeded customer expectationswhen it comes to new ideas, technological advancements, and our commitment toESP (Enhancing Safety and Productivity).

Today, we make well over 100,000 electrical products for abusive, hazardous and corrosive environments. However, rarely a day goes by that our customers dont runacross an application that requires a custom solution. In these cases we turn to our Industrial Controls & Instruments Service Centers.

Leading the way in Custom Manufacturing Services

Products designed for industrial and corrosive applications giving you more protection, efficiency, functionality, reliability and control of your operation.

Full drafting capabilities to produce custom drawings for approval and as-built drawings for all our products.

In-house control and instrumentation expertise - Not sure what product best suits your application? Our technical experts will help you come up with a solution that fits your exact needs.

Lead time reductions - Manufactured in your region of the country to get youthe products you need faster.

Enhanced solutions through local assembly and fast delivery ofcustom engineered electrical products.

Custom Modification Offering

Please consult the factory for a quotation on the following custom modifications that we are pleased to offer to help meet the needs of our customers:

Custom molded colors Gasketed windows for the FJ, FRC and the Wall Mount Series Custom sizes Special hole patterns for drilling & tapping configurations Dead front & sub panels Silk screening capabilities Terminal kits and din rails available

Gasketed WindowFJ, FRC & Wall Mount Series

[email protected]



VOLTAGE

120/208V 3p,4w

120/208V 3p,4w

120/208V 3p,4w

120/208V 3p,4w

277/480V 3p,4w

277/480V 3p,4w

277/480V 3p,4w

277/480V 3p,4w

Custom Built Lighting & Power Panelboards

Motor control, power distribution products and custom control panels designed and built to our customers unique needs and delivered when they are required.

Overview:Fiberglass panelboards rated for outdoor NEMA 3R and 4X environments.

Ratings:120/208V 3 Phase, 4 WireQOB circuit breakers, single or two-pole 120/240 VAC; three-pole 240 VAC

Trip ratings:10 to 70 amps, single-pole10 to 125 amps, two-pole10 to 100 amps, three-pole

480Y/277V 3 Phase, 4 WireEDB circuit breakers, single or two-pole 277 VAC; three-pole 480Y/277 VAC

Trip ratings: 15 to 70 amps, single-pole15 to 125 amps, two-pole15 to 125 amps, three-pole

Certifications NEMA 1, 3, 3R, 4X and 12 UL Standard: 67 CSA Standard: C22.2

AMPSMAIN LUGMAIN/CB BREAKER SPACES CATALOG NUMBER* DIMENSIONS

100 A

100 A

225 A

225 A

125 A

125 A

250 A

250 A

MLO

MCB

MLO

MCB

MLO

MCB

MLO

MCB

30 circuits

30 circuits

42 circuits

42 circuits

30 circuits

30 circuits

42 circuits

30 circuits

FLP2-100L-30-X

FLP2-100M-30-X

FLP2-225L-42-X

FLP2-225M-42-X

FLP4-100L-30-X

FLP4-100M-30-X

FLP4-250L-42-X

FLP4-250M-30-X

30 x 20 x 8

30 x 20 x 8

36 x 30 x 8

48 x 36 x 12

30 x 20 x 8

36 x 30 x 8

48 x 36 x 12

48 x 36 x 12

* X denotes the need to provide the individual branch breaker quantity, amperage, and number of poles. Email your part number and breaker requirements to [email protected] or contact your local CC-H representative.

All panel interiors have a standard copper bus and ground bar; filler plates provided over unused spaces

Panelboards available up to 800 Amp MLO or MCB delivery based on configuration of panel




Custom Built Heavy Duty Disconnects (Circuit Breaker, Fusible and Non-Fusible)

Applications:Fiberglass Heavy Duty Disconnects are for use in disconnecting motor, lighting and other circuits.

Electrical Ratings Ranges: 3-pole, 60Hz, 600 VAC Starters - NEMA sizes 0, 1, 2 Breakers - 15 - 800 Amp Rating Switches - 30, 60, 100, 200 Amp

DISCONNECTS

30

60

100

200

CATALOG NUMBER HP RATINGS DIMENSIONS

FFSS-30

FFSS-60

FFSS-100

FFSS-200

5

15

25

50

15

30

60

125

16 x 10 x 8

16 x 10 x 8

24 x 12 x 11

30 x 24 x 11

Fusible Std Max

Non-Fusible

30

60

100

200

FNFSS-30

FNFSS-60

FNFSS-100

FNFSS-200

5

15

25

50

20

50

75

125

16 x 10 x 8

16 x 10 x 8

24 x 12 x 11

30 x 24 x 11

Circuit Breaker Interrupting Rating

15 - 150 Amp

100 - 250 Amp

250 - 400 Amp

400 - 800 Amp

FCB-HDL-XXX-480-18K

FCB-JDL-XXX-480-25K

FCB-LAL-XXX-480-30K

FCB-MGL-XXX-480-35K

18K

25K

30K

35K

16 x 10 x 8

24 x 12 x 11

36 x 30 x 11

36 x 30 x 11

Square D Breakers supplied as standard

Available in a full offering of trip ratings, interrupting ratings and accessories to meet a wide range of requirements.The above part numbers are available in our quick ship program. Others available on request with delivery to be determined based on specific requirements.

Also available with an interlocked receptacle switch with Cooper Crouse-Hinds Arktite Receptacles

NEMA SIZE

0

1

2

MAX HP CATALOG NUMBER* DIMENSIONS

5

10

25

FCMS-0-X-YY-ZZ

FCMS-1-X-YY-ZZ

FCMS-2-X-YY-ZZ

24 x 12 x 11

24 x 12 x 11

30 x 24 x 11

Certifications NEMA/EEMAC: 1, 3, 3R, 4X and 12 UL Standard: 508 CSA Standard: C22.2

*For X insert C for Circuit Breaker, F for fusible or NF for non-fusibleFor YY insert HP neededFor ZZ insert voltage needed

Combination Motor Starters (Circuit Breaker, Fusible and Non-Fusible)


36 Cooper-Crouse Hinds Fiberglass Enclosures

Custom Built Control Stations

Overview:The Pushbutton Series offers an enclosure solution where multiple pre-drilledopenings for 30mm push buttons are required. Enclosures are available in sizesranging from 6" x 3" to 13.5" x 11.5" with notched keyhole design and the abilityto order up to 25 holes, making this solution a perfect choice for your controlstation applications.

Electrical Ratings Ranges: Pushbutton stations and selector switches - heavy duty 600 VAC maximum Pilot lights, selector switches, push buttons 120 to 600 VAC; 24 VAC/DC

Certifications and Compliances: UL/cUL 50, Types 1, 3, 4X, 6P, 12 UL Standard: 508 CSA Std C22.2 - File 244248 Types 1, 3, 4X, 6P, 12 NEMA Standard 250 - Types 1, 3, 4X, 6P, 12

[email protected]


Custom Control Station Ordering Information

30mmPushbutton

FPB


1234567

FPBM

30mm Multi-HolePushbutton

FPBM34FPBM36FPBM39FPBM312FPBM316FPBM320FPBM325

46912162025

Holes Holes

PB Enclosure Multi-Hole Enclosure

See dimensions on page 9.

1. Choose enclosure from those listed above2. Use panel diagram at left for your pushbutton enclosure positions

3. Fill out layout chart on page 374. Choose operators and legends from charts on page 37

5. Email this information to fiberglassenclosures.com or fax to 315-477-5153

Control Station Ordering Steps


CODE

Standard Legend Plate is white legend with black lettering

LEGEND MARKING CODE LEGEND MARKING CODE LEGEND MARKING CODE LEGEND MARKING

L1

L2

L3

L4

L5

L6

L7

L8

L9

L10

L11

L12

L13

L14

L15

L16

L17

L18

L19

L20

L21

L22

L23

L24

L25

L26

L27

L28

L29

L30

L31

L32

L33

L34

L35

L36

L37

L38

L39

L40

L41

L42

L43

L44

L45

L46

L47

L48

L49

L50

L51

L52

L53

L54

L55

L56

HAND-AUTO

HAND-OFF-AUTO

HIGH

HIGH-LOW

HIGH-OFF-LOW

IN

INCH

JOG

JOG FORWARD

JOG REVERSE

JOG-RUN

JOG-SAFE-RUN

JOG-STOP-RUN

LEFT-RIGHT

LOW

LOW SPEED

LOWER

OFF

OFF-COOLANT-ON

OFF-ON

ON

OPEN

OPEN-CLOSE

OPEN-OFF-CLOSE

OUT

PUSH SP-PULL ST

POWER

Date post:	24-Nov-2015
Category:	Documents
Upload:	rocket-vt
View:	20 times
Download:	2 times

Fiberglass Catalog 12-5

Documents