Finally eliminate the guesswork from electrocoat troubleshoong! JP Tech’s “Sub” (or Submersible Data Acquision Unit) is a patented diagnosc tool that allows you to see everything that happens inside your electrocoat tanks. Test the condion of anolyte cells and electrical connecons, pinpoint complex problems (such as rupturing and pinholing) in the e-coat process, assess areas of weakness in your system, and gather informaon on tank chemistry and film buildup all from one unit si+ng right inside. JP Tech’s “Sub” is designed for a wide variety of applicaons and substrates. The “Sub” is designed to capture DC voltage, AC voltage and ripple, and current. Problems that would normally be impossible to troubleshoot become simple to see with the data collected by the “Sub.” All of this informaon is recorded to a microSD card for analysis on a computer. Charts like the one on the right are built from combining data from each probe (in different locaons on a unit) to get a comprehensive view into the E-coat process.
Transcript
Finally eliminate the guesswork from electrocoat troubleshoo�ng!
JP Tech’s “Sub” (or Submersible Data Acquisi�on Unit) is a patented diagnos�c tool that allows you to
see everything that happens inside your electrocoat tanks. Test the condi�on of anolyte cells and
electrical connec�ons, pinpoint complex problems (such as rupturing and pinholing) in the e-coat
process, assess areas of weakness in your
system, and gather informa�on on tank
chemistry and film buildup all from one unit
si+ng right inside. JP Tech’s “Sub” is
designed for a wide variety of applica�ons
and substrates.
The “Sub” is designed to capture DC voltage,
AC voltage and ripple, and current. Problems
that would normally be impossible to
troubleshoot become simple to see with the
data collected by the “Sub.”
All of this informa�on is recorded to a
microSD card for analysis on a computer.
Charts like the one on the right are built
from combining data from each probe (in
different loca�ons on a unit) to get a
comprehensive view into the E-coat process.
Specifica�ons
Inputs: 7 channels (6 probes, one probe connected to 2 channels, DC & AC)
• 6 DC Voltage - 0-600 Volts
• 1 AC Voltage - 0-600 Volts
Ba�ery: Internal Li-ion ba8ery with safety regula�on
Ba�ery Charge: Min. 14 hr. charge �me from full discharge to 100% @ 12V DC
Power: 12V DC USB cable for charging
Trigger Voltage: 2V DC (Unit will not record un�l one probe reaches 2V DC)
Sample frequency: 500 milliseconds
I/O Connec�ons: USB Mini-B; MicroSD Card slot
Dimensions: 11”L x 10”W x 5”D
Weight: 5 lbs.
What can the “Sub” do?
With the ability to capture 7 channels of con�nuous data, JP Tech’s “Sub” can detect and help
pinpoint a wide range of problems in an e-coat line, such as:
