Finepix z5fd e200hp Manual 01

8/10/2019 Finepix z5fd e200hp Manual 01

1/164

OWNERS MANUAL

This manual will show you how to useyour FUJIFILM DIGITAL CAMERA

FinePix Z5fd correctly.Please follow the instructions carefully.

BL00582-200(1)

Getting Ready

Using the Camera

Advanced Features Photography

Settings

Camera Connection

SoftwareInstallation

Playback

Movie

Appendices

Troubleshooting


2/164

2

Warning

To reduce the risk of fire or electric shock, do not expose the ACpower adapter to rain or moisture.The AC power adapter should not be exposed to dripping or

splashing and that no objects filled with liquids, such as vases,should be placed on the AC power adapter.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with

the manufacturers instructions. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) thatproduce heat.

Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.

Only use attachments/accessories specified by themanufacturer.

Unplug this apparatus during lightning storms or when unused forlong periods of time.

Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plug is damaged, liquid hasbeen spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operatenormally, or has been dropped.

To prevent fire or shock hazard, do not expose the unit to rainor moisture.

For customers in the U.S.A.

Tested To ComplyWith FCC Standards

FOR HOME OR OFFICE USE

FCC StatementThis device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.

CAUTIONThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for

help.You are cautioned that any changes or modifications not expresslyapproved in this manual could void the users authority to operatethe equipment.

Notes on the Grant:To comply with Part 15 of the FCC Rules, this product must be usedwith a Fujifilm-specified ferrite-core A/V cable, USB cable, and DCsupply cord.

For customers in Canada

CAUTIONThis Class B digital apparatus complies with Canadian ICES-003.

WARNINGS

IMPORTANT SAFETY

INSTRUCTIONS

Please read the Safety Notes (p.157) and makesure you understand them before using the camera.


3/164

3

IMPORTANT

NOTICEBEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILMCORPORATION. PLEASE READ THIS END USER LICENSEAGREEMENT CAREFULLY. ONLY IF YOU AGREE WITH THISAGREEMENT, SHOULD YOU USE THE SOFTWARE RECORDED ON

THE CD-ROM. BY OPENING THE PACKAGE, YOU ACCEPT ANDAGREE TO BE BOUND BY THIS AGREEMENT.

End User License Agreement

This End User License Agreement (Agreement) is an agreement betweenFUJIFILM Corporation (FUJIFILM) and you, which sets forth the termsand conditions of the license granted for you to use the software providedby FUJIFILM.The CD-ROM contains third party software. In case a separate agreementis provided by a third party supplier for its software, the provisions of suchseparate agreement shall apply to the use of such third party software,prevailing over those of this Agreement.

1. Definitions.(a) Media means the CD-ROM titled Software for FinePix CX- whichis provided to you together with this Agreement.

(b) Software means the software which is recorded on Media.(c) Documentation means the operation manuals of Software and

other related written materials which are provided to you togetherwith Media.

(d) Product means Media (including Software) and Documentationcollectively.

2. Use of Software.FUJIFILM grants to you a nontransferable, nonexclusive license:(a) to install one copy of Software onto one computer in binary machine

executable form;(b) to use Software on the computer onto which Software is installed; and

(c) to make one backup copy of Software.3. Restrictions.

3.1 You shall not distribute, rent, lease or otherwise transfer all or anypart of Software, Media or Documentation to any third party withoutFUJIFILMs prior written consent. You also shall not sublicense,assign or otherwise transfer all or any part of the rights granted toyou by FUJIFILM under this Agreement without FUJIFILMs priorwritten consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall notcopy or reproduce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation.You also shall not alter or remove copyright and other proprietarynotices that appear on or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer,decompile, or disassemble Software.

4. Ownership.All copyrights and other proprietary rights to Software and Documentation areowned and retained by FUJIFILM or the third party suppliers as indicated onor in Software or Documentation. Nothing contained herein shall beconstrued, expressly or implicitly, as transferring or granting any right, license,or title to you other than those explicitly granted under this Agreement.

5. Limited Warranty.FUJIFILM warrants to you that Media is free from any defect in materialand workmanship under normal use for ninety (90) days from the dateof your receipt of Media. Should Media not meet the foregoing warranty,FUJIFILM shall replace such defective Media with other Media bearingno defect. FUJIFILMs entire liability and your sole and exclusiveremedy with regard to any defect in Media shall be expressly limited tosuch FUJIFILMs replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDESPRODUCT AS IS AND WITHOUT WARRANTIES OF ANY KIND,EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY

COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHERPROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMITATION OF LIABILITY.IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANYGENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FORLOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THEUSE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8. No export.You acknowledge that neither Software nor any part thereof, will betransferred, or exported to any country or used in any manner in violationof any export control laws and regulations to which Software is subject.

9. Termination.In case you breach any of the terms and conditions hereof, FUJIFILMmay immediately terminate this Agreement without any notice.

10.Term.This Agreement is effective until the date when you cease to useSoftware, unless earlier terminated in accordance with Section 9 hereof.

11. Obligation upon termination.Upon termination or expiration of this Agreement, you shall, at your ownresponsibility and expense, delete or destroy immediately all Software(including its copies), Media and Documentation.

12. Governing Law.This Agreement shall be governed by and construed in accordance withlaws of Japan.

Be sure to read this page before using the software.


4/164

4

EC Declaration of Conformity

WeName: FUJIFILM Europe GmbHAddress: Heesenstrasse 31

40549 Dusseldorf, Germany

declare that the productProduct Name: FUJIFILM DIGITAL CAMERA FinePix Z5fdManufacturers Name: FUJIFILM CorporationManufacturers Address: MIDTOWN WEST, 7-3, AKASAKA 9-CHOME

MINATO-KU, TOKYO 107-0052, JAPAN

conforms to the following Standards:Safety:EN60065EMC: EN55022: 1998 Classe B

EN55024: 1998

EN61000-3-2: 1995 + A1: 1998 + A2: 1998

following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and93/68/EEC) and Low Voltage Directive (73/23/EEC).

Dusseldorf, Germany

Place

November 1, 2006

This product comes with batteries. When these are empty, you shouldnt throw themaway but deliver them as domestic chemical refuse.

Signature/Managing DirectorDate


5/164

5

Disposal of Electric and Electronic Equipment in Private Households

Disposal of used Electrical & Electronic Equipment(Applicable in the European Union and other European countries with

separate collection systems)

This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that thisproduct shall not be treated as household waste.

Instead it should be taken to an applicable collection point for the recycling of electrical and electronicequipment.By ensuring this product is disposed of correctly, you will help prevent potential negative consequences tothe environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct.

If your equipment contains easy removable batteries or accumulators please dispose these separately according to your localrequirements.The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,please contact your local city office, your household waste disposal service or the shop where you have purchased the product.

In Countries outside the EU:If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.


6/164

6

Contents

Warning................................................................. 2

IMPORTANT......................................................... 3

EC Declaration of Conformity................................ 4

Disposal of Electric and Electronic Equipment in

Private Households ......................................... 5Contents................................................................ 6

Preface.................................................................. 8

About this Manual ............................................... 10

Accessories Included .......................................... 11

Camera Parts and Features................................ 12

Example of LCD Monitor Text Display ................ 13

Getting Ready

Loading the Battery............................................. 14Charging the Battery........................................... 16

Loading the xD-Picture Card ......................... 18

Turning On and Off ............................................. 20

Setting the language, date, and time .......... 21

Correcting the Date and Time............................. 23

Selecting the Language ...................................... 24

Using the Camera

Taking Pictures (AUTO Mode)............................ 25

Using Intelligent Face Detection when

taking pictures .......................................... 28

Taking pictures with the focus and

exposure locked....................................... 30

Adjusting the shot composition ................... 32

Viewing the Images............................................. 33

Erasing the Images/Movies............................ 37

Using the erase button ( /n) .................... 37Erasing from the PLAYBACK MENU .......... 37

Advanced Features Photography

Using the Shooting Functions

Procedure of Setting ..................................... 40

Setting the Shooting Mode................................. 42

Setting Picture stabilization (Anti-blur)

and Natural & d ................................ 42

Setting a Shooting mode suited to the

scene....................................................... 43

eMacro (Close-up)........................................... 48

dSetting the Flash (Intelligent Flash)................ 49

*Self-Timer ...................................................... 51

jIncreasing Monitor Brightness ...................... 53

Using p-MODE MENU (Shooting)/SHOOTING MENU ....................................... 54

Setting the p-MODE MENU (Shooting) .... 54

Setting the SHOOTING MENU .................. 54

p-MODE MENU (Shooting) .............................. 57

Changing the sensitivity setting (SISO)... 57

Changing the quality setting

( QUALITY).......................................... 58

Changing the FinePix COLOR setting

( FinePix COLOR) ............................... 59

SHOOTING MENU............................................. 60

Adjusting exposure compensation

(S EXP. COMPENSATION) ................. 60Adjusting color balance

(TWHITE BALANCE) .......................... 61Focusing the shot quickly

( HIGH-SPEED SHOOTING) .............. 61

Taking pictures continuously( CONTINUOUS)................................. 62


7/164

7

Specifying focusing mode

(HAF MODE)......................................... 64

Advanced Features Playback

p-MODE MENU (Playback)............................... 66Sending and receiving images

( IR COMMUNICATION) ...................... 66

Transmitting and saving blog images

( TRIMMING FOR BLOG).................... 69

Setting automatic playback

( SLIDE SHOW) ................................... 70

DPOF set frame

( PRINT ORDER (DPOF)).................... 71

Using PLAYBACK MENU ................................... 77Setting the PLAYBACK MENU ................... 77

Rotating the images

( IMAGE ROTATE)............................... 78

Protecting the images ( PROTECT) ....... 79

Copying the images (VCOPY)................. 80Adding voice memos to the images

( VOICE MEMO) .................................. 83

Trimming the images ( TRIMMING)........ 86Advanced Features Movie

rRecording Movies.......................................... 88

Changing movie size................................... 90

wPlaying Back Movies ..................................... 91

Settings

U SET-UP......................................................... 94Using the SET-UP menu............................. 94

SET-UP menu option.................................. 95

Camera Connection

Connecting to a TV........................................... 104

Connecting Camera Directly to Printer

PictBridge Function..................................... 105

Software Installation

Installation on a Windows PC........................... 110

Installation on a Mac OS X............................... 113

Connecting to a PC .......................................... 116

Using FinePixViewer ................................ 119

Appendices

System Expansion Option................................ 122

Accessories Guide ........................................... 123

Using Your Camera Correctly .......................... 125

Power Supply and Battery................................ 126

Notes on the xD-Picture Card and

the Internal Memory .................................... 129

Warning Displays ............................................. 131

Troubleshooting

Troubleshooting................................................ 135

Specifications .................................................. 143

Explanation of Terms ...................................... 149

FUJIFILM Digital Camera Worldwide

Network...................................................... 150

Safety Notes.................................................... 157


8/164

8

Preface

Z Test Shots Prior to Photography

For important photographs (such as weddings andoverseas trips), always take a test shot and view theimage to make sure that the camera is working normally. FUJIFILM Corporation cannot accept liability for any

incidental losses (such as the costs of photography orthe loss of income from photography) incurred as aresult of faults with this product.

ZNotes on Copyright

Images recorded using your digital camera system cannotbe used in ways that infringe copyright laws without theconsent of the owner, unless intended only for personaluse. Note that some restrictions apply to the

photographing of stage performances, entertainmentsand exhibits, even when intended purely for personal use.Users are also asked to note that the transfer ofxD-Picture Cardcontaining images or data protectedunder copyright laws is only permissible within therestrictions imposed by those copyright laws.

ZHandling Your Digital Camera

This camera contains precision electronic components.To ensure that images are recorded correctly, do not

subject the camera to impact or shock while an image isbeing recorded.

Z Liquid Crystal

If the LCD monitor is damaged, take particular care withthe liquid crystal in the monitor. If any of the followingsituations arise, take the urgent action indicated. If liquid crystal comes in contact with your skin

Wipe the area with a cloth and then wash thoroughlywith soap and running water.

If liquid crystal gets into your eyeFlush the affected eye with clean water for at least 15minutes and then seek medical assistance.

If liquid crystal is swallowedFlush your mouth thoroughly with water. Drink largequantities of water and induce vomiting. Then seekmedical assistance.

Z Trademark Information

and xD-Picture Cardare trademarks ofFUJIFILM Corporation.

IBM PC/AT is a registered trademark of InternationalBusiness Machines Corp. of the U.S.A.

Macintosh, Power Macintosh, iMac, PowerBook, iBookand Mac OS are trademarks of Apple Computer, Inc.,registered in the U.S. and other countries.

Microsoft, Windows, and the Windows logo are

trademarks, or registered trademarks of MicrosoftCorporation in the United States and/or other countries.Windows is an abbreviated term referring to theMicrosoftWindowsOperating System.

* The Designed for MicrosoftWindowsXP logo refersto the camera and the driver only.

IrSimpleTrademark is owned by the Inferfared DataAssociation.

Other company or product names are trademarks orregistered trademarks of the respective companies.


9/164

9

ZNotes on Electrical Interference

If the camera is to be used in hospitals or aircrafts, pleasenote that this camera may cause interference to otherequipment in the hospital or aircraft. For details, pleasecheck with the applicable regulations.

ZExplanation of Color Television System

ZExif Print (Exif ver. 2.2)Exif Print Format is a newly revised digital camera fileformat that contains a variety of shooting information foroptimal printing.

* See Using Your Camera Correctly (p.125) for moreinformation.

NTSC: National Television System Committee, colortelevision telecasting specifications adoptedmainly in the U.S.A., Canada and Japan.

PAL: Phase Alternation by Line, a color televisionsystem adopted mainly by European countriesand China.


10/164

10

About this Manual

Z 4-direction (nopq) button

Up, down, left, and right are indicated by black triangles in the Owners Manual. Up or down is shown as nor o, and left orright is shown as por q.

eMacro (Close-up)

Use this mode to take close-up shots.Available Shooting modes:s, AUTO, , , ,

( p.44, 46, 47)

Presse(p) to select Macro mode.Presse(p) again to cancel Macro mode.

CHECK

Focal range

Wide angle:Approx. 8 cm to 80 cm (3.1 in. to 2.6 ft.)Telephoto:Approx. 45 cm to 80 cm (1.5 ft. to 2.6 ft.)

Effective flash rangeApprox. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)

MEMO

We recommend using a tripod to prevent camera shakein Macro mode.

Any of the following cancels Macro mode:- Changing the Shooting mode setting- Turning the camera off

Even if theHAF MODE is set to MULTI ( p.64),the camera focuses near the center of the LCD monitor.

122AUTOUT eappears on the LCDmonitor indicating that you

take close-up shots.

Icons indicate the modes that are available.

CAUTION

This mark denotes issues that may affect the

cameras operation.

CHECK

This mark denotes points to notice in thecameras operation.

MEMO

This mark denotes additional topics thatcomplement the basic operating procedures.

When pressing q:

When pressing DISP/BACK:


11/164

11

Accessories Included

Rechargeable Battery NP-40 (1)Soft case included

Strap (1)

AC Power Adapter AC-5VZ (1 set)

A/V cable (1)

USB cable (1)

CD-ROM (1)Software for FinePix CX

Owners Manual (this manual) (1)

Attaching the strap

Attach the strap as shown in 1 and 2.When attaching the strap, move the fastener to adjust thelength and slightly away from the end of the strap, asshown in figure 1.

1 2


12/164

12

Camera Parts and Features

Refer to the pages in parentheses for information on using the camera parts or features.

A

BC

D

JK

L

M

N

OP

Y

Z

E

F

G

H

I

Q

R

S

T

U

V

W

X

a Mode switch

b Shutter button

c Intelligent Face Detection button(p.28)

d POWER switch/Lens cover

e Flash (p.49)

f Microphone

g Lens

h Speaker

i Illumination lamp (p.99)/Self-timer lamp

(p.52)

j Indicator lamp (p.28)

k w(Playback) button

l LCD monitor

m 4-direction nopqbutton (p.10)

n Battery cover (p.14)

o Tripod mount

p Multi-connector adapter connection

socket

q W(Wide zoom) button (p.26, 34)

r T(Tele zoom) button (p.26, 34)

s Photo mode (p) button (p.54)t Infrared port (p.66)

u Strap mount

v MENU/OK button

w Picture stabilization (Anti-blur)/

Natural & dbutton (p.42)

x DISP (Display)/BACK button (p.32, 33)

y xD-Picture Card slot (p.18)

z Battery release catch (p.15)

{ Battery compartment (p.15)


13/164

13

Example of LCD Monitor Text Display

ZPhotography mode

ZPlayback mode

FinePix Z5fd has internal memory that can store images without xD-Picture Card.Yappears on the LCD monitor when the internalmemory is active.

UPP

122177

UPP

M

F4.24.2250250 13

1 / 1 / 2006 12:00 AM1 / 1 / 2006 12:00 AM1 / 1 / 2006 12:00 AM1 / 1 / 2006 12:00 AM

ISO 100SO 100ISO 100SO 100

+11

A

B

CD

EF

G

H

I

J

K

LM

NOP

Q

R

S

T

a eMacro (close-up) (p.48)

bCFlash (p.49)

c Intelligent Face Detection

(p.28)d sShooting mode (p.42)

e Battery level indicator

(p.17)

f High-speed shooting

(p.61)

g fContinuous shooting

(p.62)

h AF frame (p.26)

i Date/Time (p.21)

j (Self-timer (p.51)k 9White balance (p.61)

l 5N Quality mode (p.58)

m Number of available frames

(p.147)

n FinePix COLOR (p.59)o {AF warning (p.131)

p |Camera shake warning

(p.131)

q Increasing monitor

brightness (p.53)

rYInternal memory (p.19)

s ISO 100 Sensitivity (p.57)

tSExposure compensation(p.60)

N

100-000100-0001100-000100-0001N

2F4.24.2250250 -11-11 23

250250 F4.24.21 / 1 / 2006 12:00 AM1 / 1 / 2006 12:00 AM1 / 1 / 2006 12:00 AM1 / 1 / 2006 12:00 AM

ISO 100SO 100ISO 100SO 100

A

B

C

D

E

F

G

H

a wPlayback mode (p.33)

b Intelligent Face Detection

(p.35)

c Blog image (p.69)

d uDPOF (p.71)

e Frame number (p.98)

f Present (p.33)

g#Voice memo (p.83)

hFProtection (p.79)


14/164

14

Loading the Battery

Battery is required to operate the digital camera. At first,load the battery in the camera.

ZCompatible battery

Rechargeable Battery NP-40 (1)

CAUTION

The battery is not fully charged at shipment and must befully charged before being used.

Do not stick labels onto the battery as this could causethe battery to become jammed inside the camera. Any contact between the battery terminals could cause

the battery to short circuit and overheat. See p.126-127 for information on the battery. Always use the Rechargeable Battery NP-40

(included). The use of other brands of rechargeablebattery could cause faults or damage to the camera.

1 Open the battery cover.

CHECK

Check that the camera is turned off before opening the

battery cover.

CAUTION

Do not open the battery cover while the camera is on.This could damage the xD-Picture Cardor ruin theimage files on the xD-Picture Card.

Do not apply force to the battery cover.

IndicatorTerminals

14


15/164

15

GettingReady

2Load the battery.Make sure that the indicators are aligned. Push thebattery release catch down while loading the battery.Check that the battery is firmly held in place.

CAUTION

Load the battery in the correct direction.

3Close the battery cover.

To remove the battery

Open the battery cover, and unlock the battery release catch

with your finger.

CAUTION

Make sure the camera is turned off before removing thebattery.

Battery release catch

Indicators

Battery release catch


16/164

16

Charging the Battery

The battery is not fully charged at shipment and must befully charged before being used.

Connecting the AC power

adapter to the cameraAConnect the AC power adapter to the camera.

CHECK

Loading the Battery (p.14)

CAUTION

Always check that the camera is turned off. Make sure the AC power adapter is fully and securely

inserted into the multi-connector adapter connectionsocket.

ZUsing the AC power adapter

You can take pictures and play back images withoutworrying about depleting the battery.

CAUTION

Always use the FUJIFILM AC Power Adapter AC-5VZ(included).

See p.128 for notes on using the AC power adapter.

Only connect and disconnect the AC power adapterwhen the camera is off. Connecting or disconnectingthe AC power adapter while the camera is ontemporarily interrupts the power supply to the camera,which will stop the recording of images or movies beingshot. Failing to turn the camera off before connecting/disconnecting can also result in damage to the xD-Picture Cardor malfunctions during PC connection.

The power outlet should be nearby the equipment andeasily accessible.

The shape of the plug and power outlet depends on the

country of use.

BPlug the connecting

cable into the AC

power adapter.

CPlug the connecting

cable into the power

outlet.


17/164

17

GettingReady

Camera operation during

charging

When connection is completed, battery charging begins.Charging ends after about 2 hours.

CHECK Indicator lamp

[During charging] Lit red[Charging completed] Off[Charging error] Blinking red (p.136)

Battery protection function

When you try to charge the battery immediately after thecamera has been used continuously for a long period,charging may not begin soon (the indicator lamp does not turnred).

This is not a camera fault, but is for protecting the battery frombeing charged while it is warm. Battery may degrade whencharged at high temperatures.Leave the camera connected to the AC power adapter, andcharging will automatically begin within 30 minutes.

CAUTIONNotes on charging the battery

Turning the camera on during charging interrupts the

charging. Charging times increase at low temperatures.

Checking the battery charge

Turn the camera on and check the battery level indicatoron the LCD monitor.

AThere is ample battery charge. (Lit white)

BThe battery is almost half charged. (Lit white)

CThere is insufficient charge left in the battery. Thebattery will soon run out. Have a charged battery

ready. (Lit red)

DThe battery is depleted. The display will shortly go

blank and the camera will stop working. Replace or

recharge the battery. (Blinking red)

CAUTION

Due to the nature of the battery, the battery level

indicator ( , , or V) may appear earlywhen the camera is used in cold locations. Try warmingthe battery in your pocket or a similar location beforeuse.

Battery with no remaining charge (Vblinking red)may cause camera faults. Always load a fully chargedbattery.

Depending on the camera mode, the transition fromto Vmay occur more quickly.

Indicator lamp

L di th D Pi t C d


18/164

18

Loading the xD-Picture Card

Although you can store pictures in the cameras internalmemory, you can store many more images on the xD-Picture Card(sold separately). There is a slot for the xD-Picture Cardinside the battery compartment.

1 Open the battery cover.

2 Insert an xD-Picture Card.

3Close the battery cover.

How to replace the xD-Picture Card

Push the xD-Picture Cardinto the slot and then slowlyremove your finger. The lock is released and the xD-PictureCardis pushed out.

Gold marking

Gold contact area

Align the gold marking withthe gold contact area, andinsert the card firmly intoplace.


19/164

19

GettingRe

ady

CAUTION

When storing xD-Picture Cards, make sure that theyare kept out of the reach of children. An xD-PictureCardcould be swallowed and cause suffocation. If achild swallows an xD-Picture Card, seek medical

attention or call emergency number right away. If the xD-Picture Cardis oriented incorrectly, it will not

go all the way into the slot. Do not apply force wheninserting an xD-Picture Card.

Note that the xD-Picture Cardmay spring out if yourelease your finger quickly from the card immediatelyafter the lock is released.

Operation of this camera is only guaranteed when it isused with FUJIFILM xD-Picture Card.

See p.129 for information on the xD-Picture Cardandthe internal memory.

MEMO

The size of an image file varies depending on thesubject. For this reason, the number recorded may notrepresent the actual number of frames.

See p.147 for information on the standard number ofavailable frames.

ZAbout internal memory

When an xD-Picture Card(sold separately) isinserted[Record images]: Record images to an xD-Picture

Card.[Playback images]: Playback images in an xD-Picture

Card.

When an xD-Picture Card(sold separately) is notinserted[Record images]: Record images to internal memory.[Playback images]: Playback images in internal memory.

ZAbout images in the internal memory

Images held in the cameras internal memory may becorrupted or erased due to problems such as camerafaults. Save your important data to another media (i.e.,CD-R, CD-RW, DVD-R, hard disk, etc.).It is possible to transfer saved images on the internalmemory to an xD-Picture Card(p.80).

122177AUTOUTFinePix Z5fd has internalmemory that can storeimages without xD-PictureCard. Yappears on theLCD monitor when internalmemory is active.

Turning On and Off


20/164

20

Turning On and Off

Turning the camera on in

Shooting mode

Open the lens cover completely to turn the camera on.Close the lens cover until it stops to turn the camera off.

MEMOChanges between Shooting mode and Playback

mode

Press wduring shooting to change to Playback mode.Press the shutter button down halfway to return toShooting mode.

CAUTION

Take care not to get fingerprints on the camera lens as

this will result in impaired image quality in your shots.

Turning the camera on in

Playback mode

ALeave the lens cover closed.

BPress wfor about 1 second to turn the camera on in

Playback mode.

Press wduring playback to turn the camera off.

CAUTION

When the lens cover is open, even if you press w, thepower cannot be turned off. Follow the instructions on theLCD monitor.

MEMO

To change to Shooting mode, open the lens covercompletely so that it will not move further.

Power-ON Power-OFF Close the lens cover


21/164

21

GettingRe

ady

Setting the language, date, and

time

When using the camera for the first time after purchasing,the language, date, and time are cleared. Set thelanguage, date, and time.

1 screen appears when turningthe camera on.

2Set the date and time.

MEMO

Holding down nor ochanges the numberscontinuously.

When the time displayed passes 12, the AM/PMsetting changes.

Continued Q

APress n, o, p, or qto select thelanguage.

BPress MENU/OK to confirm the setting.

SETET NOO

START MENUTART MENU

/ LANG.LANG

APress por qto select Year, Month,Day, Hour, or Minute.

BPress nor oto correct the setting.

SETET NOO

DATEATE /TIME NOT SETTIME NOT SET

YY.MM.DDY.MM.DD 1. 1 12:00. 1 12:00

AMM


22/164

22

Turning On and Off

3Change the date format.

Date format

ex. November 24, 2006YY.MM.DD: 2006.11.24MM/DD/YY: 11/24/2006DD.MM.YY: 24.11.2006

MEMO

START MENU screen also appears when the battery hasbeen removed and the camera has been left for a longperiod. Once the AC power adapter has been connectedor the battery has been installed for 2 hours or more, the

camera settings will be retained for roughly 6 hours evenif both sources of power are removed.

When the Auto power off function is active, if the camerais left unused for 2 or 5 minutes, this function turns thecamera off (p.102). To restore power to the camera totake pictures, briefly close the lens cover completely andthen reopen it. To play back images, hold down wforabout 1 second.

SETET NOO

AMM

11 / 24 / 2006 10:001 / 24 / 2006 10:00

DATE / TIME NOT SETATE / TIME NOT SET

DD . MM . YYD . MM . YY

YY . MM . DDY . MM . DD

MM /M DD /D YYY

APress por qto select the date format.

BPress nor oto set the format.

CAlways press MENU/OK after the settings

are completed.

Auto power off function


23/164

Selecting the Language


24/164

24

Selecting the Language

1 Open the SET-UP menu. 2Display the screen.

APress MENU/OK to open the menu.

BPress nor oto select USET-UP.

CPress q.

SHOOTING MENUHOOTING MENU

HIGH-SPEED SHOOTINGIGH SPEED SHOOTING

SHOOTING MODEHOOTING MODE

OFFFF

AUTOUTO

SET-UPET UP

OFFFFCONTINUOUSONTINUOUS

APress por qto select .

BPress oto move to menu item.

CPress nor oto select .

DPress q.See 1 screen appears

when turning the camera on. (p.21).

SETET UPUP

VIDEO SYSTEMIDEO SYSTEM

2 MINMIN

ENGLISHNGLISH

AUTO POWER OFFUTO POWER OFF

NTSCTSC

TIME DIFFERENCEIME DIFFERENCE

BACKGROUND COLORACKGROUND COLOR

RESETESET

Taking Pictures (AUTO Mode)


25/164

25

U

singtheCamera


This section describes the basic operations.

1 Turn the camera on.AOpen the lens cover completely so that it will not move

further.

BSet the Mode switch to q.

Holding the camera correctly

CAUTION

Moving the camera while shooting gives a blurredpicture (camera shake). Hold the camera steadily withboth hands.

If the lens or flash is obscured by your fingers or thestrap, subjects may be out of focus or the brightness(exposure) of your shot may be incorrect.

Check that the lens is clean. If it is dirty (getting

fingerprints on the lens etc.), clean the lens as informedon p.125.

Continued Q

Power-ON

Brace your elbows

against your sides andhold the camera with bothhands.

Do not cover the lens orflash with your fingers.

25

U

singtheCamera


26/164

26


2Check the composition on the LCD monitor.To adjust zoom scale using the Zoom button:

MEMO

Select eMacro mode to take close-up shots (p.48). Use digital zoom when you want to shoot the subject

closer (

p.99).

3Focus on the main subject in the AF frameand press the shutter button down halfway.

CHECK

Focus on the subjectDouble beep is heardIndicator lamp lit green

Not focus on the subjectNo sound{indicatedIndicator lamp blinking green

MEMO

The shutter button has a halfway point at which focus andexposure are automatically optimized before taking thepicture by pressing fully down.

CAUTION

When the shutter button is pressed halfway, themovement of the lens will emit a sound.

AUTOUTO AUTOUTO100 100100100

W button(Zoom out) T button(Zoom in)

Focal rangeApprox. 60 cm (2.0 ft.)to infinity

Optical zoom focallength (35 mmcamera equivalent)Approx. 36 mm to108 mm(%: Approx. 38 mm to114 mm)

Max. zoom scale3

Zoom bar

AUTOUTO 100

F4.24.2250250250250 F4.24.2

100

AF frame AF framebecomes smallerand camerafocuses on thesubject.

Halfwaypressed


27/164

27

U

singtheCamera

4Press the shutter button fully.

CAUTION

When taking a picture using the flash, the image maydisappear and go dark briefly due to flash charging. Theindicator lamp blinks orange during charging.

MEMO

When the subject is not in the AF frame, use AF/AE lockto take the picture (p.30).

When pressing the shutter button down fully in onemotion, the camera takes the picture without the AFframe changing.

When a picture is taken, the illumination lamp on thefront of the camera lights to indicate that shooting iscomplete.

Flash

Change the flash mode when you want to take pictures withoutflash. See p.49 for information on flash.

CAUTION

The image shown on the LCD monitor before thepicture is taken may differ in brightness, color, etc. fromthe image actually recorded. Play back the recordedimage to check it (p.33).

When selecting a slow shutter speed that will causecamera shake, |appears on the LCD monitor. Useflash or a tripod.

See p.131-134 for information on Warning displays.

See Troubleshooting (p.135-142) for moreinformation.

Continued Q

ClickDouble

beep

Halfway pressed Fully pressed

F4.24.2250250250250 F4.24.2

When pressing the shutterbutton down halfway, b

appears on the LCD monitorbefore the flash fires.

Taking Pict res (AUTO Mode)


28/164

28


Z Indicator lamp display

The indicator lamp lights or blinks when pressing the shutterbutton, etc. The indicator lamp shows the camera status.

MEMO

Only the slip stopper on the left side lights as the indicator

lamp. The other two slip stoppers are for holding thecamera only and do not light.

MEMO

Detailed warning messages appear on the LCD monitor(p.131-134).

Using Intelligent Face Detection

when taking pictures

Intelligent Face Detection allows you to focus on andadjust the brightness of peoples faces. Intelligent FaceDetection is effective with the camera held horizontally orvertically.

Available Shooting modes: AUTO, , , ,

H, , , , , , s

ATo activate Intelligent Face Detection, press once.To

turn Intelligent Face Detection off, press again.

Display Status

Lit green Locking the focus

Blinking green Camera shake warning, AF warning,or AE warning (ready to shoot)

Blinking green andorange alternately

Recording to xD-Picture Cardorinternal memory (ready to shoot)

Lit orange Recording to xD-Picture Cardorinternal memory (not ready)

Blinking orange Charging flash (flash will not fire)

Lit red Charging battery

Blinking red Warnings for xD-Picture Cardandinternal memoryCard not formatted, incorrect format,memory full, xD-Picture Cardorinternal memory error

Lens operation error

Indicator lamp

10

AUTOUT 100en t ere are mu t p e

people in the frame,Intelligent Face Detectionwill set a green frame aroundthe face nearest to the centerof the picture. This face hasfocusing priority.

Green frame


29/164

29

U

singtheCamera

CAUTION

If the camera or subject moves as the picture is taken,the subjects face may move out of the Intelligent FaceDetection frame.

When the camera is detecting multiple faces, the green

frame is set around the face near the center. If you wantto focus on another subject, move the camera so thatthe new subject is in the center of the LCD monitor.If focus is still not achieved, press (Intelligent FaceDetection) to turn off the function, and take the pictureusing AF/AE lock (p.30).Intelligent Face Detection can focus on a face in a whiteframe providing the subjects in the green and whiteframe are of the same focal length.

When the shutter button is pressed halfway withIntelligent Face Detection off, the focus will be on the

center of the LCD monitor. When the shooting mode is set to or s, the image

will be focused with respect to faces, but because theexposure will be controlled by the shooting mode, faceswill not be adjusted for optimal exposure.

BPress the shutter button down fully to take pictures.

Subjects not suitable for Intelligent Face Detection

Intelligent Face Detection automatically focuses on a face(s)turned towards the camera. However, difficulties will occurwith the Intelligent Face Detection mode in the followingsituations:

The face is obscured by glasses, sunglasses, a hat, or hair. A person turned sideways, or who has their head tilted. The subject is too far away to recognize a face.

Intelligent Face Detection will not work in cases where thesubject is standing on his/her head, is not a person (pet orother animal), or if the camera is not held correctly.

Continued Q

Click

Fully pressed



30/164

30


Taking pictures with the focus

and exposure locked

In the above composition, the subjects (two people in thiscase) are not in the AF frame. Pressing the shutter buttonhalfway at this point will result in the subjects being out of

focus.

AF/AE lock is useful:

Use AF/AE lock to guarantee best result when shooting asubject that is not suited to autofocusing (p.31).

CAUTION

When shooting with the AF/AE lock function, turn offIntelligent Face Detection.

1 Move the camera slightly so that one of thesubjects is in the AF frame.

2Press the shutter button down halfway tofocus on the subject.

100AUTOUT 100

Using AF/AE lock

100AUTOUT 100

F4.24.2250250250250 F4.24.2

Doublebeep

Halfwaypressed


31/164

31

U

singtheCamera

3Continue to hold the shutter button downhalfway. Move the camera back to the

original image and press the shutter button

fully.

MEMO

AF/AE lock can be applied repeatedly before the shutteris released.

On FinePix Z5fd, pressing the shutter button downhalfway locks the focus and exposure settings (AF andAE lock).

Subjects not suitable for autofocus

FinePix Z5fd uses a high-precision autofocusing mechanism.However, it may have difficulty focusing on the following:

Subjects photographed through glass Subjects that do not reflect well, such as hair or fur Subjects with no substance, such as smoke or flames Dark subjects Subjects with little or no contrast between the subject and

the background (such as subjects dressed in the same coloras the background)

Shots where another high-contrast object (not the subject) isclose to the AF frame and is either closer or further awaythan your subject (such as a shot of someone against abackground with strongly contrasting elements)

For such subjects use AF/AE lock (p.30).

F4.24.2250250250250 F4.24.2

Click

Fully pressed

Very shiny subjects suchas a mirror or car body

Fast moving subjects



32/164

32


Adjusting the shot composition

Select the LCD monitor display.

Press DISP/BACK to change the LCD monitor display.

Position the main subject atthe intersection of two linesin this frame or align one of

the horizontal lines with thehorizon. Use this frame as aguide to the subjects sizeand the balance of the shotwhile composing a shot.

MEMO

Always use AF/AE lock when composing a shot. Theimage may be out of focus if AF/AE lock is not used.100AUTOUT

100AUTOUT

100

100

Text displayed No text displayed

Framing guidelinedisplayed

Best framing

N 100100AUTOUT

Viewing the Images


33/164

33

UsingtheCamera

Play back your images to check them. For importantphotographs, always take a test shot and view the imageto make sure that the camera is working normally.

Setting the camera to Playback

mode

Press wduring shooting to change to Playback mode.

When the camera is off, press wfor about 1 second toturn the camera on in Playback mode.

MEMO

When pressing w, the last image shot appears on theLCD monitor.

When playing back images shot with a camera otherthan FinePix Z5fd, (present icon) appears on theLCD monitor.

CAUTION Still images viewable on FinePix Z5fd

This camera will display still images recorded on FinePixZ5fd or still images (excluding some uncompressedimages) recorded on any FUJIFILM digital camera thatsupports xD-Picture Cards. Clear playback or playbackzooming may not be possible for still images shot oncameras other than FinePix Z5fd.

Select the LCD monitor display.Press DISP/BACK during Playback mode to change theLCD monitor display.

Continued Q

F4.24.2250250 11 23

250250 F4.24.2

ISO 100SO 100ISO 100SO 100

100 - 000100 0001100 - 000100 0001

11 / 24 / 2006 10:00 AM11 / 24 / 2006 10:00 AM

N

2006 6

11

11 23311 222

11 244

11 / 24 / 2006 10:00 AM11 / 24 / 2006 10:00 AM

Text displayed No text displayed

Multi-frame playbackSorting by date

Viewing the Images


34/164

34

Single-frame playback

Intelligent Face Detection

When playing back images taken with Intelligent FaceDetection (p.28) ( appears on the LCD monitor),press (Intelligent Face Detection). A frame appearsaround the faces that were detected by FinePix Z5fd.Press (Intelligent Face Detection) to alternate thedetected face. For images shot with a camera other thanFinePix Z5fd, the frame does not appear.

1 Zoom in / Zoom out.To zoom in an image during single-frame playback:

2Display another part of the image.

To select the required image:

Press p: last image

Press q: next image

Selecting images

F4.24.2250250 11 23

250250 F4.24.2

ISO 100SO 100ISO 100SO 100

100 - 000100 0001100 - 000100 0001

N

11 / 24 / 2006 10:00 AM11 / 24 / 2006 10:00 AM11 / 24 / 2006 10:00 AM11 / 24 / 2006 10:00 AM

To select images on thethumbnail lists screen, holddown por qfor 1 secondduring playback.When releasing por q,camera returns to single-frame playback.

Playback zoom

Press n, o, p, or qto display another

part of the image.

W button (Zoom out) T button (Zoom in)

Press Wor Tto zoom in or out on animage.

Zoom bar

Navigation screen

(Current displayedimage)


35/164

35

UsingtheCamera

Z Zoom scales

MEMO

Pressing DISP/BACK cancels playback zoom.


For images taken with Intelligent Face Detection (p.28)( appears on the LCD monitor), the displayed faceswitches each time you press (Intelligent FaceDetection). Press the Wbutton (zoom out) or Tbutton(zoom in) to display the selected face zoomed in or out.Press n, o, p or qto display another part of theimage.

Multi-frame playback

Multi-frame playback screen (9 frames) appears on theLCD monitor. Select required frame from the 9 frames.

Continued Q

Quality mode Max. zoom scale

5(2848 2136 pixels) Approx. 4.5

%(3024 2016 pixels) Approx. 4.7

3(2048 1536 pixels) Approx. 3.2

2(1600 1200 pixels) Approx. 2.5

BACKACKZOOMOO M

APress n, o, p, orqto move the cursor

(colored frame) to the selecting frame.

Press nor orepeatedly to jump to thenext page.

BPress MENU/OK to enlarge the image.

Viewing the Images


36/164

36

Sorting by date

In sorting by date mode, you can view all images taken onthe same day.

APress n, o, p, or qto move the cursor

(colored frame) to the selecting frame.

BPress MENU/OK to enlarge the image.

2006 6

11

11 23311 222

11 244

Selecting the date

APress n, o, p, orqto move the cursor

(colored frame) to on the upper left

frame.

BPress pto display the selecting date.

CPress noroto move the cursor (colored

frame) to select the date.

Press nor orepeatedly to jump to the

next page.

DPress q.

2006 6

11

11 23311 222

11/2424

Erasing the Images/Movies Setting the camera towPlayback mode (p.33)


37/164

37

UsingtheCamera

Use this mode to erase unnecessary images or movies tohave ample free space on the xD-Picture Cardor internalmemory. Your camera calls images frames.

Using the erase button ( /n)

Pressing (n) erases images easily.

Erasing from the PLAYBACK

MENU

APress por qto select the erasingimage.

BPress (n).

CPress por qto select OK.

DPress MENU/OK to erase the displayed

image.

ERASE OK?RASE OK?

SETET

OKK CANCEL CANCEL

APress MENU/OK to open the PLAYBACK

MENU.

BPress nor oto select ERASE.

CPress q.

Continued Q

PLAYBACK MENUL YB CK MENU

ERASER SE

COPYOPY

PROTECTROTECT

IMAGE ROTATEM GE ROT TE

VOICE MEMOOICE MEMO

TRIMMINGRIMMING

Erasing the Images/Movies

Setting the camera to wPlayback mode (p.33)


38/164

38

MEMO

To erase another frame (file), repeat above steps.When erasing frames (files) is completed, press DISP/BACK.

CAUTION

Pressing MENU/OK repeatedly erases consecutiveframes (files). Take care not to erase a frame (file) bymistake.

DPress nor oto select FRAME or ALL

FRAMES.

EPress MENU/OK to confirm the setting.

PLAYBACK MENULAYBACK MENU

ERASERASE

PROTECTROTECT

IMAGE ROTATEMAGE ROTATE

VOICE MEMOOICE MEMO

COPYOPY

TRIMMINGRIMMING

FRAMERAME

ALL FRAMESLL FR MES

Erasing one frame at a time (FRAME)

APress porqto select the erasing frame(file).

BPress MENU/OK to erase the currentlydisplayed frame (file).

ERASE OK?RASE OK?

YESES CANCELANCEL

Setting the camera to wPlayback mode (p.33)


39/164

39

UsingtheCamera

MEMO

MEMO

When using an xD-Picture Card, the images in the xD-Picture Cardare erased. When not using an xD-Picture Card, the images in the internal memory areerased.

Protected frames (files) cannot be erased. Unprotectthe frames (files) before erasing them (p.79).

If DPOF SPECIFIED. ERASE OK? or DPOFSPECIFIED. ERASE ALL OK? appears, press MENU/OK again to erase the frames (files).

CAUTION

Erased frames (files) cannot be recovered. Back upimportant frames (files) onto your PC or another media.

Erasing all frames (ALL FRAMES)

Press MENU/OK to erase all the frames

(files).

Press DISP/BACK to cancelerasing of all the frames(files). Some unprotectedframes (files) will be leftunerased.

ERASE ALL OK?RASE ALL OK?

IT MAY TAKE A WHILET MAY TAKE A WHILE

YESES CANCELANCEL

CANCELANCEL

Using the Shooting Functions Procedure of Setting


40/164

40

Specify the camera settings for taking pictures to get thebest result. A general guide is given below.

1 Select the Shooting mode.Set the Shooting mode from the menu.The camera settings are tailored to the scene beingshot.

2Specify the photography settings.Pressing buttons or selecting menu allows you tospecify photography functions. You can obtain thebest result for shooting.

ZSpecifying functions using buttons

s

This mode provides detailed settings thatare impossible to set in AUTO mode(p.47).

AUTOThis is the easiest mode for takingpictures (p.44).

/ /H/,/

./// / // / / /

/

Select the best Shooting mode for the

scene being shot (p.44-47).

Used for selecting a fast shutter speedthat reduces camera shake and moving-subject blurring (p.47).

HIGHIGH -

SPEED SHOOTINGPEED SHOOTING


CONTINUONTINU

SETET - UPP


LANDSCAPEANDSCAPE

PORTRAITORTRAIT

AUTOUTO

NATURAL LIGHTATURAL LIGHT

MANUALANUAL

NATURAL&ATURAL&

IntelligentFace Detection

Pressing this button allows you to focus onpeoples faces (p.28).

eMacro Used for close-up shots (p.48).

dFlash Used for shots in dark locations or forbacklit subjects, etc. (p.49).

*Self-timerUsed in situations such as group shotswhere the photographer is included in theshot (p.51).

Picturestabilization(Anti-blur)

Used for selecting a fast shutter speed thatreduces camera shake and moving-subject blurring (p.42).

Natural & dUsed to shoot the same scene with andwithout flash (p.42).

e (p) Macro buttond (q) Flash button* (o) Self-timer button

( ) Picture stabilization(Anti-blur)/Natural & d

Intelligent FaceDetection button

40


41/164

41

AdvancedFeaturesPhotography

ZSpecifying functions using p-MODE MENU(pbutton)

ZSpecifying functions using SHOOTING MENU(MENU/OK button)

SISOUse to specify required sensitivitysetting (p.57).

QUALITY

Use to specify required image size

(p.58).

FinePix COLORUse to specify required color tone(p.59).

ISOSO

MODE MENUODE MENU

AUTOUTO

STDTD

N

QUALITYUALITY

COLOROLOR

SEXP.COMPENSATION

Use this setting to obtain the correctexposure (only s) (p.60).

TWHITEBALANCE

Use to adjust the color tone (only s)(p.61).

HIGH-SPEEDSHOOTING

Use to focus the shot quickly (p.61).

CONTINUOUSUse to take pictures continuously(p.62).

HAF MODEUse to specify focusing mode (onlys) (p.64).


HIGHIGH - SPEED SHOOTINGPEED SHOOTING OFFFF

OFFFF

WHITE BALANCEHITE BALANCE


AUTOUTO

EXP. COMPENSATIONXP. COMPENSATION +0

CONTINUOUSONTINUOUS

AF MODEF MODE

M

Setting the Shooting Mode


42/164

42

You can select the most suitable setting according to thesubject by selecting one of the Shooting modes.

Setting Picture stabilization

(Anti-blur) and Natural & d

Press the ( ) button to set Picture stabilization(Anti-blur) or Natural & d.The setting switches with each press of the button.You can select Picture stabilization (Anti-blur) andNatural & dfrom the Shooting modes on the shootingmenu (p.43)When Picture stabilization (Anti-blur) or Natural &dis selected on the shooting menu, pressing the ( ) button switches between these two modes.

This mode can reduce both camera blur and subject blurby increasing the shutter speed.

This mode shoots 2 images continuously without flashand with flash. Shooting with flash allows you to take apicture of a main subject brightly. Shooting without flashproduces beautiful images that retain the naturalambience. This mode is useful for shooting 2 differenttypes of pictures at the same time.

When pressing the shutter button, first picture is takenwithout flash and next picture is taken with flash.Always 2 pictures are taken per 1 shot.Do not move the camera until the shooting ended.

MEMO

This mode helps to avoid failed shots that may occurwhen using other Shooting modes when taking a pictureagainst the sun, etc.

CHECK

Flash fires automatically. Do not use this mode atsituations where the flash cannot be used.

CAUTION

When there is insufficient space on the xD-Picture Cardor internal memory for 2 shots, this mode cannot be set.

Continuous shooting is disabled when setting .

Picture stabilization (Anti-blur)

Previous shooting mode

NATURAL & d


43/164

43

AdvancedFeaturesP

hotography

Setting a Shooting mode suited

to the scene

ASet the Mode switch to q.

MEMO

See p.50 for information on the available flash modes. When anything other than AUTO, s, , , and

in the SHOOTING MODE is selected, p-CHROME (p.59) cannot be set.

When anything other than sin the SHOOTINGMODE is selected, only AUTO can be selected for theISO (sensitivity) setting.

Continued Q

BPress MENU/OK to open the menu.

CPress nor oto select theSHOOTING MODE.

DPress q.

EPress nor oto select the setting.

FPress MENU/OK to confirm the setting.

HIGHIGH - SPEED SHOOTINGPEED SHOOTING


CONTINUONTINU

SETET - UPP


LANDSCAPEANDSCAPEPORTRAITORTRAIT

NATURAL&ATURAL&

AUTOUTO

NATURAL LIGHTATURAL LIGHT

MANUALANUAL



44/164

44

This is the easiest mode for providing crisp and clearshots.Use this mode for ordinary photography.Camera specifies all setting other than p-MODE (Qualityand FinePix COLOR) automatically.

This mode producesbeautiful images that retainthe natural ambience whenshots are taken in low-lightconditions.This mode is also ideal for

shooting indoor or situationswhere the flash cannot beused.Camera sets the high-sensitivity setting when selectingthe Natural light mode. This mode is effective for reducingcamera shake and moving-subject blurring when takingpictures in low-light conditions.

CHECK

Flash cannot be used in the Natural light mode.

Use this mode to shoot the same scene with and withoutflash. You can also select this mode by pressing the

( ) button.

Natural & d(p.42)

Use this mode forphotography to getbeautiful skin tones andsoft overall tone.

Use this mode for shootingscenery in daylight andprovides crisp, clear shots of

scenery such as buildingsand mountains.

CHECK

Flash cannot be used inthe Landscape mode.

AUTO

NATURAL LIGHT

NATURAL & d

HPORTRAIT

,LANDSCAPE


45/164

45

AdvancedFeaturesP

hotography

Use this mode to takepictures of a moving subject.It gives priority to fastershutter speeds.

CHECK

When setting .Sport mode, the camera sets toHigh-speed shooting mode (p.61) automatically.

Use this mode for shootingevening and night scenes.

A picture is taken with a slowshutter of up to 4 seconds.

CHECK

We recommend using a tripod to prevent camera shake.

Because a picture is taken with a slow shutter.

Use this mode to shootfireworks.It is effective for takingmore vivid shots offireworks with a slowshutter.

CHECK

Flash cannot be used in the Fireworks mode. Shutter speed setting: 1/2 sec. to 4 sec. We recommend using a tripod to prevent camera shake

in the Fireworks mode.

ZSelecting the exposure time setting

.SPORT

/NIGHT

FIREWORKS

Press por qto select the exposure time.

4.0".0

122

100



46/164

46

Use this mode to shootsunset, making the colorsmore vivid.

Use this mode to preventdarkening images andprovide crisp, clear shots,when shooting at snowyscene where the wholescreen appears white.

Use this mode to prevent

darkening images andprovide crisp, clear shots,when shooting at beachunder strong sunlight.

Use this mode for takingpictures in places such asmuseum where the use offlash and making anoperation sound and ashutter sound arerestricted.The flash mode is set tosuppressed flash and theoperation sound, shutter sound, and illumination lamp aredisabled.

MEMO

Check whether photography is permitted before using thismode.

Use this mode for shootingat indoor wedding andparty.This mode producesbeautiful images that retain

the natural ambience whenshots are taken in low-lightconditions.

SUNSET

SNOW

BEACH

MUSEUM

PARTY


47/164

47

AdvancedFeaturesP

hotography

Use this mode to takeclear close-up shots whenzooming up a flower.It is effective for takingmore vivid shots of flowerpetal.

CHECK

Flash cannot be used in the Flower mode. Focal range

Wide angle:Approx. 8 cm to 2 m (3.1 in. to 6.6 ft.)Telephoto:Approx. 45 cm to 2 m (17.7 in. to 6.6 ft.)

Use this mode to shootdocuments and whiteboard.It is effective for takingclearer shots of letters.

CHECK

Focal rangeWide angle:Approx. 8 cm to 2 m (3.1 in. to 6.6 ft.)Telephoto:Approx. 45 cm to 2 m (17.7 in. to 6.6 ft.)

Use this mode to select a fast shutter speed that reducescamera shake and moving-subject blurring.You can also select this mode by pressing the ( )button (p.42).

Set the Photography functions to manual to easily controlyourself.Photography functions: SEXP. COMPENSATION (p.60) TWHITE BALANCE (p.61) HAF MODE (p.64)

FLOWER

TEXT

ANTI-BLUR (Picture stabilization)

sMANUAL

eMacro (Close-up)

Use this mode to take close up shots CHECK


48/164

48

Use this mode to take close-up shots.Available Shooting modes:s, AUTO, , , ,

(p.44, 46, 47)

Press e(p) to select Macro mode.Press e(p) again to cancel Macro mode.

CHECK

Focal rangeWide angle:Approx. 8 cm to 80 cm (3.1 in. to 2.6 ft.)Telephoto:Approx. 45 cm to 80 cm (1.5 ft. to 2.6 ft.)

Effective flash rangeApprox. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)

MEMO

We recommend using a tripod to prevent camera shakein Macro mode.

Any of the following cancels Macro mode:- Changing the Shooting mode setting- Turning the camera off

Even if the HAF MODE is set to MULTI (p.64),

the camera focuses near the center of the LCD monitor.

100AUTOUTO eappears on the LCD

monitor indicating that youcan take close-up shots.

dSetting the Flash (Intelligent Flash)

Flash photography is useful for taking pictures at night orb


49/164

49

AdvancedFeaturesP

hotography

Flash photography is useful for taking pictures at night orindoor dark locations. Choose from 6 flash modesaccording to the type of shot. See p.50 for information onthe available Photography modes.

MEMO What is Intelligent Flash?

The Intelligent Flash feature instantly determines thesubjects position, distance from the camera, exposure,etc., and automatically adjusts the camera settings to theoptimal flash volume and sensitivity for the scene. Evendimly lit indoor scenes can be shot beautifully, just as theyappear, without subjects being washed out or losingbackground details.The Intelligent Flash feature is always used whenshooting with flash.

MEMO

When pressing the shutter button down halfway, bappears on the LCD monitor before the flash fires.

Use this mode for ordinary photography.

The flash fires as required by the shooting conditions.

MEMO Red-eye effect

When using the flash to take a picture of people in low-light conditions, their eyes sometimes appear red in thepicture. This is caused by the light of the flash reflectingoff the inside of the eye.

Use this mode in backlit scenes, or to get the correctcolors when taking a picture under bright lighting.In this mode, the flash fires in bright as well as darkconditions.

This mode is suitable for situations where the flash cannotbe used.

In dark conditions, we recommend using a tripod.Any time, flash does not fire.

Continued Q

AUTO Auto flash (not displayed)

The flash setting changeseach time you press d(q).

bRED EYE REDUCTION

This mode is suitable for shooting portraitsin low-light conditions.Use this mode to minimize red-eye (eyesappear in red in the finished photo).

dFORCED FLASH

SUPPRESSED FLASH

dSetting the Flash (Intelligent Flash)

CHECKc SLOW SYNCHRO


50/164

50

This mode allows you to take pictures of people at nightthat clearly show both your subjects and the night time

backdrop. Always use a tripod in this mode.Using nsynchronizes Red-eye reduction mode.Using /selects slow shutter speeds of up to 4 seconds.

CAUTION

In bright scenes, overexposure may occur.

CHECK

Effective flash range (S: AUTO)Wide-angle:

Approx. 60 cm to 3.5 m (2.0 ft. to 11.5 ft.)Telephoto:Approx. 60 cm to 2.8 m (2.0 ft. to 9.2 ft.)If you take pictures outside of the effective flash range,the image may appear dark even if the flash is used.

CAUTIONNotes on using flash

If pressing the shutter button while the flash is charging(indicator lamp blinking orange), the picture will betaken without the flash (when using AUTO and b).

The flash charging time may increase when the batteryis low on charge.

When taking a picture using the flash, the image maydisappear and go dark briefly due to flash charging. Theindicator lamp blinks orange during charging.

The flash fires several times (pre-flashes and the mainflash). Do not move the camera until the picture istaken.

CHECK

List of available flash modes in each Photography modecSLOW SYNCHRO,

nRED EYE & SLOWAUTO b d C c n

s

AUTO

H

,

.

/

*Self-Timer

The self-timer is used in situations where the Taking pictures using self-timer


51/164

51

AdvancedFeaturesP

hotography

photographer is included in the shot.Available Shooting modes: All

Setting self-timer

The self-timer setting changes each time you press *(o).


Using Intelligent Face Detection with the self-timer allowsthe camera to detect the faces of subjects in the pictureand automatically bring them into focus, without the needfor manual focusing beforehand. This is convenient whentaking a self portrait.

Taking pictures using self timer

1 Press the shutter button down halfway tofocus on the subject and press the shutter

button fully.

Pressing the shutter button down halfway that focuseson the subject.Without releasing the shutter button, press the buttonall the way down (fully pressed) to start the self-timer.

Continued Q

The last displayed settingis the selected mode.

: The picture is taken after10 seconds.

: The picture is taken after2 seconds.

100AUTOUTO

OFF

BeepDouble

beep

Halfway pressed Fully pressed

*Self-Timer

2 Take pictures in selected time


52/164

52

2Take pictures in selected time.Using the 2-second self-timer

This is useful when you worry about camera shake even ifattaching the camera on a tripod.

MEMO

To stop the self-timer, once it has started running, pressDISP/BACK.

Any of the following cancels the self-timer setting:- Completing the shooting- Changing the Photography mode setting- Setting the camera to Playback mode- Turning the camera off

Take care not to stand in front of the lens when pressing

the shutter button as this can prevent the correct focusor brightness (exposure) from being achieved.

A countdown appears on theLCD monitor indicating thetime remaining until thepicture is taken.

A picture is taken after the self-timer lamp changesfrom lit to blinking (only blinks with the 2-second self-timer).

jIncreasing Monitor Brightness

This is useful when checking the shot composition for MEMO


53/164

53


dimly lit scenes, or bright scenes such as outdoor shots.

Increasing the LCD monitor

brightness

Press j(n) to display the LCD monitor brightly.Press j(n) again to return to normal LCD monitorbrightness.

This function is automatically canceled after each shot. When this function is active, it will increase the amount

of speckling in images on the LCD monitor. This isnormal and does not affect the photographed image.

This function is purely for checking the composition of

your shot. It does not increase the brightness of theimage.

Even if you increase the brightness in low-lightconditions, you cannot check the subject.

The color tones may vary depending on the subjects.

lights up on the LCDmonitor when the function isworking.

122

100AUTOUTO

UPP

Using p-MODE MENU (Shooting)/SHOOTING MENU

Use the p-MODE MENU/SHOOTING MENU to adjusti li f Y k i i id

Setting the SHOOTING MENU


54/164

54

image quality or focus. You can take pictures in a widerange of conditions.

Setting the p-MODE MENU

(Shooting)

g

APress pto open the p-MODE MENU.

BPress nor oto select the menu.

CPress q.

DPress nor oto change the setting.


QUALITYUALITY

MODE MENUODE MENU

ISOSO5

100

199

255

12222

100 FRAMESR MES

F

N APress MENU/OK to open the SHOOTING

MENU.

BPress nor oto select the menu.

CPress q.

DPress nor oto change the setting.


HIGHIGH SPEED SHOOTINGSPEED SHOOTINGWHITE BALANCEHITE BALANCE

EXP. COMPENSATIONXP. COMPENSATION

CONTINUOUSONTINUOUS

AF MODEF MODE



+

0

M

LONG PERIODONG PERIOD

FINAL 3INAL 3

TOP 3OP 3

OFFFF

Z List of p-MODE MENU options


55/164

55


Z List of SHOOTING MENU options

Continued Q

Menu Functions SettingsFactorydefault

S ISO (p.57)Specifies required sensitivity setting of the ambient light around the subject.The larger value of the sensitivity, the higher sensitivity is obtained. Thehigher sensitivity settings will allow you to take pictures in darker locations.

AUTO/1600/800/400/200/100

QUALITY (p.58)Specifies the image size.The larger image size, the better image quality is obtained. The smallerimage size, the larger number of images are recorded.

5F/5N/%/3/2/

5N

FinePix COLOR(p.59)

Specifies required color tone.This mode is effective for taking more vivid shots or black and white shots.

STD/ / STD

Menu Functions SettingsFactorydefault

SHOOTING MODE(p.42)

Use this setting to provide the best photography menu setting for the scenebeing shot.

s/AUTO/ / /H/,/./// / /

/ / / / //

AUTO

S EXP.COMPENSATION(p.60)

This setting can be used when the SHOOTING MODE is set to s.Use this setting to obtain the correct exposure.

2 EV to +2 EV(1/3 EV increments)

0

T WHITE BALANCE(p.61)

This setting can be used when the SHOOTING MODE is set to s.Use this setting to adjust the color balance to suit the color of the ambientlight around the subject.

AUTO / 6/ 7/ 9/0/ -/ 8

AUTO

HIGH-SPEEDSHOOTING(p.61)

This setting can be used with any of the modes. This setting is always set toON when the SHOOTING MODE is set to ..Use this setting to reduce the time required for focusing.

ON/OFF OFF

CONTINUOUS(p.62)

This setting can be used when the SHOOTING MODE is set to anythingother than .Use this setting to select the required continuous shooting mode.

h/ k/ f/ OFF OFF

H AF MODE(p.64)

This setting can be used when the SHOOTING MODE is set to sandIntelligent Face Detection is set to OFF.

Use this setting to specify the focusing mode./

Using p-MODE MENU (Shooting)/SHOOTING MENU

MEMO .


56/164

56

The options available in the SHOOTING MENU varydepending on whether the mode is selected.

AUTO, , H, ,, /, , , , , , , ,,

s


HIGH-SPEED SHOOTINGIGH SPEED SHOOTING


OFFFF

AUTOUTO

SET-UPET UP

OFFFFCONTINUOUSONTINUOUS


HIGH-SPEED SHOOTINGIGH-SPEED SHOOTING


OFFFF

SET-UPET-UP



OFFFF

SET-UPET-UP

CONTINUOUSONTINUOUS


HIGHIGH - SPEED SHOOTINGPEED SHOOTING OFFFF

OFFFF



AUTOUTO

EXP. COMPENSATIONXP. COMPENSATION 0

CONTINUOUSONTINUOUSAF MODEF MODE

M


57/164

p-MODE MENU (Shooting)

Changing the quality setting

( QUALITY)Area shot and quality setting

Setting the menu (p.54)


58/164

58

( QUALITY)

Use this menu to specify the image size (number ofrecorded pixels).Select the quality setting for the scene being shot.

ZQuality settings in Photography mode

Area shot and quality setting

Normal shooting provides an aspect ratio of 4:3 and %shooting provides an aspect ratio of 3:2 (same aspect ratio as35 mm film and post card).

MEMO

The bigger the number of recorded pixels, the better theimage quality becomes. As the number of recordedpixels becomes smaller, you will be able to record moreframes to an xD-Picture Card.

The quality setting is retained even when the camera isturned off or the mode setting is changed.

When changing the quality setting, the number ofavailable frames also changes (p.147). The numbersto the right of setting show the number of availableframes.

Quality mode Sample uses

5F (2848 2136)5N (2848 2136)

Printing at up to 10R (25.4 30.5 cm/10 12 in.) / A4 sizeFor better quality, select 5F

%(3024 2016)

3(2048 1536) Printing at up to 6R (15.2 20.3 cm/6 8 in.) / A5 size

2(1600 1200) Printing at up to 4R (10.2 15.2 cm/4 6 in.) / A6 size

`(640 480) To use for e-mail or web site

100AUTOUTO 100

Area shot excluding %

AUTOUTO 100100

Area shot with%

Changing the FinePix COLOR

tti ( Fi Pi COLOR)

MEMO

The FinePix COLOR setting is retained even when the



59/164

59


setting ( FinePix COLOR)

Use this menu to specify required color tone.It is effective for taking vivid shots or black and whiteshots.

CHECK

FinePix COLOR settings

CAUTION

When anything other than AUTO, sMANUAL,NATURAL LIGHT, NATURAL & d, and Picturestabilization (Anti-blur) in the SHOOTING MODE isselected, does not appear on the LCD monitor.

The FinePix COLOR setting is retained even when thecamera is off or the mode setting is changed.

p-CHROME may have little visible effect with somesubjects or the scene being shot. You may not be ableto see any difference on the LCD monitor.

p-STANDARD

The contrast and color saturationare set to standard.Use this mode for normalphotography.

p-CHROME

The contrast and color saturationare set to high.This mode is effective for takingmore vivid shots of subjects such asscenery (blue sky and greenery)and flowers.

p-B&W

This mode converts the colors in thephotographed image to black andwhite.

When setting p-CHROME or p-B&W, theicon appears on the LCD monitor.

SHOOTING MENUSetting the menu (p.54)

Adjusting exposure

compensation

Guide to compensation


60/164

60

compensation

(S EXP. COMPENSATION)

Available Shooting mode:s(p.47)

Use this menu for shots to get the correct brightness(exposure), such as shots with extremely high contrastbetween the subject and the background.

CHECK

Compensation range: 2 EV to +2 EV(13 steps in 1/3 EV increments)

Explanation of Terms EV (p.149)

MEMO

The exposure compensation setting is retained when

the camera is turned off (Sicon appears). Set theexposure value to 0 EV unless compensation isrequired.

Any of the following disables exposure compensation:- Using the flash in AUTO or bmode- Shooting dark scenes in dmode

EXP. COMPENSATIONXP. COMPENSATION

EVV

+22

+11

-11

-22

positive (+) compensation

negative () compensation

Guide to compensation

Backlit portraits:+2/3 EV to +1 2/3 EV

Very bright scenes (such assnowfields) and highlyreflective subjects: +1 EV

Shots made up predominantly of sky: +1 EV Spotlit subjects, particularly against dark backgrounds:

2/3 EV Scenes with low reflectivity, such as shots of pine trees

or dark foliage: 2/3 EV

Adjusting color balance

( WHITE BALANCE)

Focusing the shot quickly

( HIGH SPEED SHOOTING)



61/164

61

AdvancedFeaturesPh

otography

(TWHITE BALANCE)


Adjust the color balance based on white to suit the color

of the ambient light around the subject.

AUTO: Automatic adjustment6 : Shooting outdoors in good weather7: Shooting in shade9 : Shooting under Daylight fluorescent lamps0 : Shooting under Warm White fluorescent lamps- : Shooting under Cool White fluorescent lamps8 : Shooting in incandescent light

MEMO

In AUTO mode, the correct white balance may not be

achieved for subjects such as close-ups of peoplesfaces and pictures taken under a special light source.Select the correct white balance for the light source.

When the flash fires, the white balance setting for theflash is used. Consequently, to achieve a particulareffect, the flash mode should be set to CSuppressedflash (p.49).

The color tones may vary depending on the shootingconditions (light source, etc.).

We recommend playing back images after shooting tocheck the color tones (white balance).

Explanation of Terms White Balance (p.149)

( HIGH-SPEED SHOOTING)

Available Shooting modes:

All(except for .) (p.44 47)

Use this mode to reduce the time required for focusingwhen pressing the shutter button down halfway.It is useful to avoid missing snapshot opportunities.

CAUTION

The LCD MODE function on the USET-UP menucannot be set in this mode (p.100).

MEMO

The available shooting distance is from about 1 m(3.3 ft.) to infinity.

When taking pictures while the High-speed shootingmode is set to ON, the battery will run down morequickly.

CHECK

When setting .Sport mode, the camera sets toHigh-speed shooting mode automaticallly.

Continued Q


AUTOUTO

HIGHIGH SPEED SHOOTINGSPEED SHOOTING


AUTOUTO

CONTINUOUSONTINUOUS


SETET UPUP

ONN

OFFFF

SHOOTING MENU

Taking pictures continuously

( CONTINUOUS)

pictures taken using LONG PERIOD continuousshooting are recorded without displaying the results.O l 1 f b h t h i th FINAL 3



62/164

62

( CONTINUOUS)

Use this mode to take pictures of a moving subject.

h: LONG PERIOD continuous shootingk: FINAL 3 continuous shootingf: TOP 3 continuous shooting

CAUTION

As long as the shutter button is held down, the camerawill continue to take pictures.

Number of available frames is limited depending on theavailable space on the xD-Picture Cardor internalmemory.

In TOP 3 and FINAL 3 continuous shooting mode, thefocus is determined in the first frame and cannot bechanged in mid-sequence.

The exposure is determined in the first frame, but inLONG PERIOD continuous shooting the exposure isadjusted for the scene being shot.

The speed of continuous shooting varies depending onthe shutter speed.

The flash cannot be used as the flash mode is set toCSuppressed flash (p.49). However, if you switch backto the normal shooting setting, the flash mode resets towhat it was before you selected continuous shooting.

For TOP 3 and FINAL 3 continuous shooting, theresults are always displayed after you shoot. Note that

Only 1 frame can be shot when using the FINAL 3 orLONG PERIOD continuous shooting mode and Self-timer mode together.

Continuous shooting cannot be selected inNATURAL & dsetting.

Recording times may be longer for files shot with TOP 3continuous shooting or FINAL 3 continuous shooting.

Available Shooting modes:All(except for ) (p.44 47)

HIGHIGH SPEED SHOOTINGSPEED SHOOTINGWHITE BALANCEHITE BALANCEEXP. COMPENSATIONXP. COMPENSATION

CONTINUOUSONTINUOUSAF MODEF MODE



+

0

M

LONG PERIODONG PERIODFINAL 3INAL 3TOP 3OP 3

OFFFF

fTOP 3 continuous shooting

Shooting continues as long asholding the shutter button

down. This mode shoots up to3 frames (max. 2.2 frames/sec.).

STORINGTORING

kFINAL 3 continuous shooting hLONG PERIOD continuous shooting



63/164

63

AdvancedFeaturesPh

otography


Shooting continues as long as holding the shutter button

down.This mode shoots up to 40 times (max. 2.2 frames/sec.).The camera records the final 3 frames shot when yourelease the shutter button.


Shooting continues as long as holding the shutter button

down. This mode shoots up to xD-Picture Cardorinternal memory end.

Continued Q

Max.40 shots

Press shutter button. Release shutter button.

3 frames

Press shutter button. Release shutter button.

All frames

SHOOTING MENU

Specifying focusing mode

(H AF MODE)

MULTI



64/164

64

(HAF MODE)


(When Intelligent Face Detection is turned OFF)

Use this mode to specify focusing mode that best suits thesubject.

The camera focuses on the center of the LCD monitor.Use this setting when taking pictures with AF/AE lock(p.30).

When pressing the shutter button down halfway, thecamera recognizes any strongly contrasting subject nearthe center of the LCD monitor and displays the AF frameover subject in focus.

CAUTION

When taking pictures in Macro mode, the camera focuse

Date post:	02-Jun-2018
Category:	Documents
Upload:	traxler-csilla
View:	217 times
Download:	0 times

Finepix z5fd e200hp Manual 01

Documents