FINISHING STRONG.
DIAMOND RSF DRAWINGS
RSF-0216
REAR SWING FLAILS
DIAMOND MOWERS350 EAST 60TH ST. N.
SIOUX FALLS, SD 57104
800-658-5561
DEMAND BRILLIANCE. For more details, go to DiamondMowers.com.
THERE’S NOTHING QUITE LIKE A DIAMOND FINISHAt Diamond Mowers, no job is done until it’s finished. We build the toughest, most reliable, and safest heavy-duty
equipment in the business. It’s that simple. Every piece of Diamond machinery is made in the USA, including our
Rear Swing Flail Mowers.
Get a sharp, smart, and safe finished cut in more places and under more conditions. Get it
done with high-quality, high-powered, and highly reliable Rear Swing Flail Mowers by Diamond.
A return on investment you can see, and bank on.
Demand Brilliance. DEMAND DIAMOND.
DIAMOND FROM START TO FINISH.
CLEANS UP NICE
This highly versatile attachment goes into places and
conditions where tractors and rotary systems don’t
dare. Our Rear Swing Flail (RSF) is engineered to provide
a well-groomed finished cut, unlike the rough and
ragged cut of a rotary mower. The Diamond RSF is ideal
for road and irrigation ditch maintenance, and it excels
where frequent brush, rock, and debris build-up occurs,
like old fence lines. The RSF reaches and trims back
roadside brush by utilizing a 90-degree vertical cut
feature.
The Diamond RSF also cleans up your bottom line by
cutting waste and expense associated with typical mid-
mount flail. Demand Value. Demand Diamond.
SAFETY THAT’S BUILT RIGHT IN The first rule of safety is to always use the right tool for the job. You’re halfway there just by choosing the Diamond Rear Swing Flail.
Our ultra-protective bonnet shields more cutting area than a rotary unit, keeping operator and others safer. And instead of a large, heavy rotary knife, our individual flail knives are far less likely to propel rocks and other pesky debris. Demand Safety. Demand Diamond.
BRILLIANCE COMING AND GOING
Get a sharp, smart and safe finished cut in more places and under more conditions. Get it done with high-quality, high-powered and highly reliable Rear Swing Flail Mowers by Diamond. A return on investment you can see and bank on.
REAR SWING FLAIL MOWERS
DIAMOND RSF SPECS
75" HEAVY-DUTY REAR SWING FLAIL
• 540 PTO required
• 75 HP minimum
• 9,500 lb. tractor minimum
• 2 tractor hydraulic remotes required
• Cat II hitch required
ONE-YEAR WARRANTY ON PARTS & LABOR
DIAMOND RSF FEATURES
• Ability to swing out past the rear tire on most tractors
• Mows at a 50° down angle
• Mows at a 90° vertical angle
• Provides a finished cut in hard-to-reach places with side shift and drop
• Able to run in standard or reverse rotation to match cutting conditions
PROUD TO BE AN AMERICAN COMPANYWe take enormous pride in what we build, because we take enormous pride in how and where we
build. Every Diamond product is loaded with decades of dedicated hands-on, Made-in-Sioux Falls-SD
experience. For over 40 years we’ve been offering a face-to-face, handshake guarantee on every
product we construct.
DEMAND BRILLIANCE.
Get a sharp, smart, and safe finished cut in more places and under more conditions. Get it
done with high-quality, high-powered, and highly reliable Rear Swing Flail Mowers by Diamond.
A return on investment you can see, and bank on.
Demand Brilliance. DEMAND DIAMOND.
DIAMOND FROM START TO FINISH.
CLEANS UP NICE
This highly versatile attachment goes into places and
conditions where tractors and rotary systems don’t
dare. Our Rear Swing Flail (RSF) is engineered to provide
a well-groomed finished cut, unlike the rough and
ragged cut of a rotary mower. The Diamond RSF is ideal
for road and irrigation ditch maintenance, and it excels
where frequent brush, rock, and debris build-up occurs,
like old fence lines. The RSF reaches and trims back
roadside brush by utilizing a 90-degree vertical cut
feature.
The Diamond RSF also cleans up your bottom line by
cutting waste and expense associated with typical mid-
mount flail. Demand Value. Demand Diamond.
SAFETY THAT’S BUILT RIGHT IN The first rule of safety is to always use the right tool for the job. You’re halfway there just by choosing the Diamond Rear Swing Flail.
Our ultra-protective bonnet shields more cutting area than a rotary unit, keeping operator and others safer. And instead of a large, heavy rotary knife, our individual flail knives are far less likely to propel rocks and other pesky debris. Demand Safety. Demand Diamond.
BRILLIANCE COMING AND GOING
Get a sharp, smart and safe finished cut in more places and under more conditions. Get it done with high-quality, high-powered and highly reliable Rear Swing Flail Mowers by Diamond. A return on investment you can see and bank on.
REAR SWING FLAIL MOWERS
DIAMOND RSF SPECS
75" HEAVY-DUTY REAR SWING FLAIL
• 540 PTO required
• 75 HP minimum
• 9,500 lb. tractor minimum
• 2 tractor hydraulic remotes required
• Cat II hitch required
ONE-YEAR WARRANTY ON PARTS & LABOR
DIAMOND RSF FEATURES
• Ability to swing out past the rear tire on most tractors
• Mows at a 50° down angle
• Mows at a 90° vertical angle
• Provides a finished cut in hard-to-reach places with side shift and drop
• Able to run in standard or reverse rotation to match cutting conditions
PROUD TO BE AN AMERICAN COMPANYWe take enormous pride in what we build, because we take enormous pride in how and where we
build. Every Diamond product is loaded with decades of dedicated hands-on, Made-in-Sioux Falls-SD
experience. For over 40 years we’ve been offering a face-to-face, handshake guarantee on every
product we construct.
DEMAND BRILLIANCE.
FINISHING STRONG.
DIAMOND RSF DRAWINGS
RSF-0216
REAR SWING FLAILS
DIAMOND MOWERS350 EAST 60TH ST. N.
SIOUX FALLS, SD 57104
800-658-5561
DEMAND BRILLIANCE. For more details, go to DiamondMowers.com.
THERE’S NOTHING QUITE LIKE A DIAMOND FINISHAt Diamond Mowers, no job is done until it’s finished. We build the toughest, most reliable, and safest heavy-duty
equipment in the business. It’s that simple. Every piece of Diamond machinery is made in the USA, including our
Rear Swing Flail Mowers.