Oil and Gas | Utilities Arc Resistant Clothing | Welding and Molten Metal | Fire Brigade (Wildlands/USR)

Pionér Fristads Anti-Flame Range

Specialist anti-flame protective clothing

�

Contents

Firemaster Coverall 4

Arctic Firemaster Coverall 5

Lightweight Firemaster Coverall 6

Firemaster Jacket 7

Firemaster Trousers 8

Firemaster Anti-Static Coverall 9

Arcmaster Coverall 10

Nomex Comfort ARR Coverall 11

Nomex Coverall 12

Nomex Comfort Jacket 13

Nomex Comfort Trousers 14

Nomex Comfort Winter Jacket 15

Nomex Comfort Cargo Trouser 16

FR Fleece 17

Protex Polo Shirt Long Sleeve 18

Fire Brigade Wildlands / US&R / RTA Coverall 19

FR Hi-Visibility Jacket (Lined) 20

Foundry Jacket 21

Foundry Trouser 22

SPeCiAliSt Anti-FlAme PRoteCtive Clothing

the brand name of Pionér has been associated with high quality protective clothing for more than 100 years.

in �004 Pionér was acquired by the Kwintet group, the largest supplier of Workwear in europe, and the new UK Company Pionér Fristads was formed.

With the Pionér expertise in anti-flame protective clothing already well established, the company is now also working with Key distribution partners to supply two of Kwintet’s major european workwear brands; Fristads from Sweden and Kansas from Denmark.

the link between all the product ranges is Pionér Fristads’ commitment to high quality, innovative design and excellence in customer service.

if you are looking for Workwear or specialist PPe clothing, look no further than the range of Pionér Fristads brands.

Producing high quality protective clothing for more than 100 years

�

4

DeSCRiPtion

the Firemaster is the preferred coverall for workers in the north Sea oil & gas industry both on and offshore. Designed for the use in working environments where flash flame hazards are present.

Firemaster Coverall - Fm-1040-tAP

Concealed heavy-duty brass 2-way front zip

Action back with elasticated waist

Two front swing pockets with side access

Two breast pockets with concealed heavy duty brass zip

Pen pocket on left sleeve

One right back pocket with concealed heavy duty brass zip

Right rule and leg pocket

Left open back pocket

Heavy duty stud closure at sternum and neck

Reinforced with bar tacks throughout

50mm FR reflective tape attached to arms, legs and shoulders

Sizing Chest inches cm �8 96 40 10� 4� 107 44 11� 46 117 48 1�� 50 1�7 5� 1�� 54 1�7

inside leg inches cm �� 84

FAbRiCDale sateen weave Pyrovatex treated cottonWeight: �50g/m²

StAnDARDSCe marked to en5�1 A, b1, C1Fabric conforms to en5�1 (e1) and en470-1

ColoURS18 French navy �4 Red �9 orange

5

DeSCRiPtion

Arctic Firemaster Coverall - AFm-1040-tAP

the Arctic Firemaster shares all the specifications of the Firemaster with the additional feature of a lightweight high insulation lining, providing warmth and freedom of movement.

Concealed heavy-duty brass 2-way front zip

Action back with elasticated waist

Two front swing pockets with side access and heavy duty stud closure

Two breast pockets with concealed heavy duty brass zip

Pen pocket on left sleeve

One right back pocket with concealed heavy duty brass zip

Right rule and leg pocket

Left open back pocket

Heavy-duty stud closure at sternum and neck

Heavy-duty adjustable stud closure at cuff

50mm FR reflective tape attached to arms, legs and shoulders

FAbRiCouter: Dale Sateen Weave Pyrovatex treated cotton weight: �50g/m²inner: 100g/m� �” box diamond stitch quilt pattern lining

StAnDARDSCe marked to bSen5�1 (A, b�, C�) Fabric conforms to en5�1 (e1) and en470-1

ColoURS18 French navy�4 Red�9 orange

Sizing Chest inches cm �8 96 40 10� 4� 107 44 11� 46 117 48 1�� 50 1�7 5� 1�� 54 1�7

inside leg inches cm �� 84

Sizing Chest inches cm �8 96 40 10� 4� 107 44 11� 46 117 48 1�� 50 1�7 5� 1�� 54 1�7

inside leg inches cm �� 84

6

DeSCRiPtion

lightweight Firemaster Coverall - lFm-11�5-tAP

the lightweight Firemaster shares the design features of the Firemaster Coverall but is made in a lighterweight pyrovatex fabric for use in hot climates.

Concealed heavy-duty brass 2-way front zip

Action back with elasticated waist

Two front swing pockets with side access

Two breast pockets with concealed heavy duty brass zip

Pen pocket on left sleeve

One right back pocket with concealed heavy duty brass zip

Right rule and leg pocket

Left open back pocket

Heavy duty stud closure at sternum and neck

Reinforced with bar tacks throughout

50mm FR reflective tape attached to arms, legs and shoulders

FAbRiCDale sateen weave Pyrovatex treated cottonWeight: �50g/m²

StAnDARDSCe marked to bSen5�1 (A, b1, C1)Fabric conforms to en5�1 (e1) and en470-1

ColoURS�4 Red�9 orange

FAbRiCSateen Weave Pyrovatex treated cottonWeight: �50g/m²

StAnDARDSen5�1 A b1 C1 (fabric also meets en470-1 and en5�1 e1)

ColoURS18 French navy

7

DeSCRiPtion

Designed for use in working environments where flash flame hazards are present. offering both style and comfort, it maintains the same high standards of protection as the Firemaster.

Firemaster Jacket - JKt-1040-Fm-18

Concealed heavy duty brass open end front zip to collar

Two front chest pockets with flaps and press stud closure - additional pen pocket feature on left chest pocket

Two lower front pockets. Jacket Yoke section has 25mm FR reflective tape positioned across front and back under yoke seam

Cuffs to feature tab

Velcro cuff adjusters

Action back

Waist band with elasticated side seams and press stud closure

Sleeve pocket c/w flap and Velcro closure on left sleeve

Garment reinforced with bar tacks throughout

Sizing Chest inches cm S �6/�8 91/96 m 40/4� 101/106 l 44/46 11�/117 Xl 48/50 1��/1�7 XXl 5�/54 1��/1�7

8

DeSCRiPtion

the Firemaster trousers complement the Jacket to make the ideal two piece garment, designed for both comfort and style.

Firemaster trouser - tRS-1040-Fm-18

Two front pleats

7 belt loops

Heavy duty brass zip fastening

Two side swing pockets

Right back patch pocket

Rule pocket on right leg

Garment reinforced with bar tacks throughout

Sizing Waist inches cm �8 71 �0 76 �� 81 �4 86 �6 91 �8 97 40 10� 4� 107 44 11� 46 117

inside leg inches cm �� 84

FAbRiCSateen weave Pyrovatex treated cottonWeight: �50g/m²

StAnDARDSen5�1 A b1 C1 (fabric also meets en470-1 and en5�1 e1)

ColoURS18 French navy

9

DeSCRiPtion

the Anti Static Firemaster is the same style as the Firemaster but also meets pren1149-�. it’s design provides additional protection against static build up and the increased risk of a spark in potentially flammable or explosive areas.

Concealed heavy duty non metallic two-way front zip to sternum and heavy duty non metallic press stud closure at sternum and neck

2 front chest pockets with concealed non metallic zip entry

2 front slash pockets with side access to under garments

Action back for increased freedom of movement

Elasticated back waist

Right back pocket with concealed non metallic zip entry

Left open top back patch pocket

Pen pocket on left sleeve

25cm non metallic leg zip feature at bottom hem on outseam of leg

50mm FR reflective tape to arms, legs and shoulder braces

Garment reinforced with bar tacks throughout

FAbRiCWarp: Cotton/Polyester (50/50%) 95% Anti static yarn 5%Weft: Cotton 95% - Anti static yarn 5%

StAnDARDSen5�1 A b1 C1 and en1149-�Fabric only complies en470-1 and en5�1 e1

ColoURS�9 orange

Sizing Chest inches cm �8 96 40 10� 4� 107 44 11� 46 117 48 1�� 50 1�7 5� 1�� 54 1�7

inside leg inches cm �� 84

Firemaster Anti-static Coverall - Fm-�981-Cov

10

DeSCRiPtion

Designed specifically for all types of welding work, the Arcmaster has a high resistance to arcwelding spots in all types of welding conditions.

Concealed swivel button front closure to help prevent arcing

Drawstring waist for comfort and fit

Elasticated waist

Two FR side pockets with less than 10% angled entry

Two internal breast pockets with angled entry

Two internal kneepad pockets for increased performance and comfort

Two rear pockets with 20mm wider flap and concealed Velcro closure

Rule pocket on back right leg

Face down seams used throughout to prevent metal splash or arc spots lodging in crevices

Reinforced with bar tacks throughout

Arcmaster Coverall - ARC-104�-000

FAbRiCDale moleskin weave Pyrovatex treated cotton weight: 4�5g/m²

StAnDARDSCe marked to bSen470-1 and bSen5�1 (A, b�, C1), fabric complies with en5�1 (e�)

ColoURS18 French navy �9 orange

Sizing Chest inches cm �8 96 40 10� 4� 107 44 11� 46 117 48 1�� 50 1�7 5� 1�� 54 1�7

inside leg inches cm �� 84

11

DeSCRiPtion

FAbRiCnomex® Comfort ��0g/m² (9�% nomex, 5% kevlar, �% anti static fibre)

StAnDARDSen5�1 A b1 C1 (fabric complies with en1149.�Arc thermal Protection value: 5.1AtPv (9.74) when worn over 165gm� cotton underwear)

ColoURS18 navy

Sizing Chest inches S �6/�8 m 40/4� l 44/46 Xl 48/50 XXl 5�/54 XXXl 56/58

inside leg inches cm �� 84

nomex Comfort ARR Coverall - ARR-4966-FtP-18

inherently flame retardant, antistatic coverall offering the highest levels of protection and comfort. Designed for workers who are at risk of exposure to an electrical arc.

Concealed heavy duty plastic two-way front zip to collar with heavy duty plastic press studs to provide additional protection against electric arc incidents

Two front chest pockets with flaps and heavy duty plastic press stud closure

Two front slash pockets with double layer fabric side access to under garments for increased thermal protection

Plastic press stud adjusters at cuffs and hems

Action back

50mm FR reflective tape attached to arms, legs and shoulders

Elasticated back waist

Right back pocket with flap and heavy duty plastic press stud closure

Rule pocket on right leg

Internal knee pad pockets with envelope design

Garment reinforced with bar tacks throughout

1�

DeSCRiPtion

inherently flame retardant, antistatic coverall offering the highest levels of protection and comfort. Designed for workers who are at risk of exposure to an electrical arc.

nomex Coverall - Cov-45�6-tAP

Concealed heavy duty brass two-way front zip to neck

Heavy duty non metallic press stud closure at neck and mid waist

2 front chest pockets with concealed brass zips

Radio loops on right and left breast

Inside pocket with pen section on left breast

2 front hip pockets with access to undergarments

Hi Visibility silver 50mm reflective tape on arms, legs and shoulder braces

Inside knee pad pockets with opening from below

Pen pocket on left sleeve

Action back for increased freedom of movement

Elasticated back waist

2 open top back patch pockets

Rule pocket on right back leg

Garment reinforced with bar tacks throughout

FAbRiCRoyal / Red: �60g/m² nomex® Comfort®orange: �60g/m² nomex® 111 with beckinox

StAnDARDSRoyal / Red: en5�1 A b1 C1Fabric complies with en1149.�orange: en1149-1pren1�0�4 / type 6 env 50�54, Class 1

ColoURS14 Royal�4 Red�9 orange

Sizing Chest inches S �6/�8 m 40/4� l 44/46 Xl 48/50 XXl 5�/54

inside leg inches cm �� 84

1�

DeSCRiPtion

nomex Comfort Jacket - hmJ-4966-000-18

the Jacket offers both style and comfort whilst maintaining the highest levels of protection.

Concealed heavy duty plastic open end front zip with exposed plastic press stud closure at sternum and neck

Concealed heavy duty plastic press stud closure at top of zip and waist band to provide additional protection against flash fire incidents

2 front chest pockets with flaps and plastic press stud closure

2 lower front patch pockets

1 internal open top pocket

50mm reflective tape across back

Plastic press stud cuff adjusters

Action back

Garment reinforced with bar tacks throughout

FAbRiCnomex Comfort ��0g/m² (9�% nomex, 5% kevlar, �% anti static fibre)

StAnDARDSen5�1 A b1 C1, fabric complies with en1149.�

ColoURS18 blue

Sizing Chest inches S �6/�8 m 40/4� l 44/46 Xl 48/50 XXl 5�/54 XXXl 56/58

14

DeSCRiPtion

nomex Comfort trouser - hmt-4966-000-18

Comfortable and hardwearing trouser in nomex Comfort to complement the Jacket

2 front hip swing pockets

Sewn in front leg crease

Back patch pocket on right hand side (as worn)

5 belt loops

Plastic closed end front zip with plastic slider with internal zip cover

Plastic press stud closure at waist band end

Reinforced with bar tacks at all stress points

FAbRiCnomex Comfort ��0g/m² (9�% nomex, 5% Kevlar, �% anti static fibre)

StAnDARDSen5�1 A b1 C1 fabric complies with en1149.�

ColoURS18 blue

Sizing Waist inches cm �8 71 �0 76 �� 81 �4 86 �6 91 �8 97 40 10� 4� 107 44 11� 46 117

inside leg inches cm �1 79 �� 84

Sizing Chest inches S �6/�8 m 40/4� l 44/46 Xl 48/50 XXl 5�/54 XXXl 56/58

15

DeSCRiPtion

nomex Comfort Winter Jacket - nCJ-4966-000-18

inherently Flame Retardant, insulated Winter Jacket. offering style, comfort and Warmth.

FAbRiCouter: nomex Comfort ��0g/m²Fixed lining : �70g/m² FR lining/wadding

StAnDARDSen5�1 A b1 C1en1149-�

ColoURS18 blue

Inherently Flame Retardant Insulated Jacket with heavy duty plastic front zip and storm flap

2 front pockets and 2 chest pockets with flap and velcro closure

Fixed FR quilted lining with internal pocket plus additional mobile phone pocket

Action back for increased freedom of movement

Waist band tab adjusters

Extended lower back for additional protection

FR knitted cuffs

Bar tacked at all stress points

16

DeSCRiPtion

Comfortable and hardwearing trouser in nomex Comfort fabric

nomex Comfort Cargo trouser - UWt-4966-000-18

Two front slash pockets

Cargo pocket for tools with flap and velcro closure on left leg

Two knee pad pockets on front legs

Right back pocket with flap and velcro closure

Right double rule pocket

Left open back pocket

Elasticated side waist (standard waistband with concealed elastication)

Belt loops

Plastic front zip

Plastic button at waistband

Reinforced with bar tacks throughout

FAbRiCnomex Comfort ��0g/m² (9�% nomex, 5% kevlar, �% anti static fibre)

StAnDARDSen5�1 A b1 C1Fabric complies with en1149.�

ColoURS18 Dark blue

Sizing Waist inches cm �8 71 �0 76 �� 81 �4 86 �6 91 �8 97 40 10� 4� 107 44 11� 46 117

inside leg inches cm �1 79 �� 84

FAbRiCFR Fleece ��5gm² �6% polyester FR, ��% acrylic FR, �7% cotton, 4% anti static fibrelining: nomex / viscose 50% / 50% FR Waterproof, windproof, breathable, membrane weight approx 155gm²

StAnDARDSen5�1 A b� C1, en1149-1 (outer fabric)en50�54 Class 1

ColoURS18 navy

Sizing Chest inches cm S �6/�8 91/96 m 40/4� 101/106 l 44/46 11�/117 Xl 48/50 1��/1�7 XXl 5�/54 1��/1�7

17

DeSCRiPtion

inherently Flame Retardant Fleece Jacket

FR Fleece - UUF-�500-000

Inherently Flame Retardant Fleece Jacket with front zip (non metallic) closure

Two side pockets

Sizing Chest inches cm S �6/�8 9�/97 m 40/4� 10�/107 l 44/46 11�/117 Xl 48/50 1��/1�7 XXl 5�/54 1��/1�7

18

DeSCRiPtion

inherently flame and heat resistant long sleeve polo shirt.

Protex Polo Shirt long Sleeve - PS1-000�-lS

Inherently flame and heat resistant long sleeve polo shirt

3 button placket

Ribbed cuffs

Ribbed shirt collar

Hem finished bottoms

FAbRiCFibre composition: 60% Protex 40% Cotton - weight �10gm� cross-tuck.

StAnDARDSmeets en5�1 A b1 C1

ColoURS18 navy

Sizing Chest inches S �6/�8 m 40/4� l 44/46 Xl 48/50 XXl 5�/54 XXXl 56/58

inside leg inches cm �� 84 �1 79

19

DeSCRiPtion

Fire brigade Wildlands / US&R / RtA Coverall FbC-1117-000

multi purpose, hard-wearing coverall for Fire brigades. Specifically designed for comfort, this coverall is made in nomex Comfort Rip-stop fabric reinforced with nomex tough (Delta t)

Concealed heavy-duty brass two-way nomex front zip to top of collar with front storm flap and velcro closure

2 bellow Radio pockets on right and left breast with radio loop on left breast

Trouser hems with flaps and gusset feature and velcro fastening tab

Elbow, knee and shoulder areas are padded with Nomex Tough fabric

Sleeve hems with internal FR knitted cuff feature and adjustable velcro fastener

50mm retro reflective tape attached to arms and legs

Action back with additional back dart feature for freedom of movement

Shoulder epaulettes with Velcro

Elasticated back waist with velcro adjusters

Thigh height bellow pockets with flaps on right and left legs

High stand-up collar with Velcro fastening

Garment reinforced with bar tacks throughout

FAbRiCnomex® Comfort Rip Stop (9�% nomex, 5% kevlar, �% anti static fibre)Reinforcement: nomex® tough® ( Delta t )

StAnDARDSen5�1 A b1 C1 , fabric complies with en1149.�Complies with performance characteristics contained in iSo DiS 15�84

ColoURS19 Dark navy

�0

DeSCRiPtion

Stylish, durable & comfortable Jacket to be worn in conjunction with selected styles from the Pioner Fristads flame-retardant range. Features detachable FR lining for both Summer & Winter wear.

FR hi-visibility Jacket (lined) - hvJ-�0��-000

Concealed plastic front zip front closure

2 front pockets in to side seam

Raglan sleeves

Stand up collar with concealed hook and loop closure

FR knitted rib cuffs and front waistband

2 band and braces of 50mm Scotchlite reflective tape to body and 2 bands on each sleeve

Extended back lower panel for added protection and warmth

Detachable FR quilted lining.

Sizing Chest inches cm S �6/�8 91/96 m 40/4� 101/106 l 44/46 11�/117 Xl 48/50 1��/1�7 XXl 5�/54 1��/1�7

FAbRiCouter Fabric: FR 50% cotton 50% polyester � ply laminated FR satin weave the fabric used in the production of the FR high-visibility jacket is �00 grm² anti-flame fabric to provide more comfort and protection for the wearer. the laminate provides an additional water resistant feature.lining Fabric : 170 gm Pyrovatex lining plus �70gm detachable FR lining/wadding.

StAnDARDSCe marked to bSen5�1, A, b1, C1en 471 Class �en�4�: �00� body Fabric complies with en470-1

ColoURS�5 hi visibility Yellow

�1

DeSCRiPtion

molten metal splash (D�) Protective Jacket in a soft handle, lightweight, Flame Retardant Fabric.

Foundry Jacket - FnD-0�10-JKt

Raglan sleeve

Concealed heavy duty brass press studs front closure

2 inside patch pockets

Extra wide collar for increased neck protection

Coloured flash round chest for increased visibility in dark areas

Double skin sleeves for extra protection (cuff to elbow)

No labels in back neck

FAbRiC50% lenzing viscose FR /�0% wool / �0% PAWeight: �10gm

StAnDARDSmeets en5�1: A (limited flame spread)b1 (convective heat min � seconds max 6 seconds) C1 (radiant heat min 8 seconds max �0 seconds) D� (molten aluminium splash) e� (molten iron splash)meets en470-1

ColoURS18 navy (with red flash)

Sizing Chest inches cm S �6/�8 91/96 m 40/4� 101/106 l 44/46 11�/117 Xl 48/50 1��/1�7 XXl 5�/54 1��/1�7

��

DeSCRiPtion

molten metal splash (D�) Protective trouser in a soft handle, lightweight, Flame Retardant Fabric

Foundry trousers - FnD-0�10-tRS

Two front slash pockets with less than 10% angled entry

1 rear pocket with concealed FR velcro flap closure

Front fly with press stud closure

Plastic concealed button on inside of waistband to close waistband

Additional features double skin on lower legs (from knee to bottom hem)

6 belt loops 2.5” between bartacks

FAbRiC50% lenzing viscose FR /�0% wool / �0% PAWeight: �10gm

StAnDARDSmeets en5�1: A (limited flame spread)b1 (convective heat min � seconds max 6 seconds) C1 (radiant heat min 8 seconds max �0 seconds) D� (molten aluminium splash) e� (molten iron splash) meets en470-1

ColoURS18 navy

Sizing Waist inches cm �8 71 �0 76 �� 81 �4 86 �6 91 �8 97 40 10� 4� 107 44 11� 46 117

inside leg inches cm �� 84

Guy

TextBox

www.safetysupplies.co.uk