FIRMWARE UPGRADE PROCEDURE TECHNCAL NOTIFICATION

V06.000 upgrade for KX-HDV130

06.12.2018

2

© Panasonic Co., Ltd.

Contents

Overview .................................................................................................................................................. 3

Upgrade Process ...................................................................................................................................... 4

Device Display Sequence ......................................................................................................................... 5

First Time Update .................................................................................................................................... 5

Previously Updated ................................................................................................................................. 6

Manual Upgrade Overview ....................................................................................................................... 8

What you will need… ............................................................................................................................... 8

What is next… ......................................................................................................................................... 8

Software Installation ................................................................................................................................ 9

Setup Login Credentials ........................................................................................................................ 10

Change Firewall Settings ...................................................................................................................... 11

Download Firmware .............................................................................................................................. 12

Upgrade Firmware ................................................................................................................................ 13

Firmware Confirmation .......................................................................................................................... 14

3

© Panasonic Co., Ltd.

Overview This document outlines the unique firmware upgrade procedure required for the listed model. Please follow this procedure carefully to ensure successful firmware upgrade to the new version.

Panasonic SIP Model KX-HDV130

This firmware upgrade package contains two FW files (part1 and part2)

Firmware Update Summary

1. Put both HDV130-06.000_US.fw.part1 and HDV130-06.000_US.fw.part2 in your FW maintenance server.

2. Set the FW File path “/HDV130-06.000_US.fw.part1“ in the device.

3. The device downloads HDV130-06.000_US.fw.part1 from the server and FW updating is done by HDV130-06.000_US.fw.part1 first. Then the device automatically downloads HDV130-06.000_US.fw.part2 and

FW updating is done by HDV130-06.000_US.fw.part2.

HDV130-06.000_US.fw.part1 Both files are required during the update procedure to properly upgrade the device. HDV130-06.000_US.fw.part2

NOTE

Once firmware is upgraded, you CANNOT downgrade to Ver.1.04x or earlier.

Upgrade device to new firmware in a network environment with no VLAN and no proxy

Do NOT rename these files!

Do NOT set “/HDV130-06.000_US.fw.part2” as FW file path

In the case of upgrade by TR069, "BOOT" and "Transfer Complete" will be displayed with new version after the part2 upgrade is complete.

4

© Panasonic Co., Ltd.

Upgrade Process This diagram illustrates the upgrade process. This process takes approximately 10-15 minutes to complete.

Please be careful not to disconnect power and network during firmware update.

Upgrade Firmware via WebUI

At firmware version 1.04x or earlier, you can NOT use macros: {MAC}, {mac}, {MODEL}, {fwver}

GET “HDV130-06.00_US.fw.part1”

GET “HDV130-06.00_US.fw.part2”

When update fails by disconnect power or network, reconnect power and network. Then device starts update again. Do not reset to factory default.

HDV130-06.000_US.fw.part1

HDV130-06.000_US.fw.part2

Reboot

Reboot

5

© Panasonic Co., Ltd.

Device Display Sequence As the upgrade process advances, the device display will maintain the current upgrade status. This display cycle is dependent upon whether the device is being upgraded for the first time, or the unit has already received part of the upgrade.

First Time Update

If this is the first time to update the device with part1/part2 update, the device will display as follows:

<ERASING> 080%

<ERASING> 100%

<WRITING> 010%

<WRITING> 100%

<WRITING OK>

COMPLETED

<PART1 ERASING> 080%

<PART1 ERASING> 100%

<PART1 WRITING> 010%

<PART1 WRITING> 100%

<PART1 WRITING OK>

REBOOTING…

<Network Checking…>

<DOWNLOADING> 080%

<DOWNLOADING> 100%

<ERASING> 080%

<ERASING> 100%

<WRITING> 010%

<WRITING> 100%

<WRITING OK>

COMPLETED

STAND BY

STAND BY

Upgrade Completed

Rebooting… Rebooting…

Rebooting…

Rebooting…

6

© Panasonic Co., Ltd.

Previously Updated

If the device has been updated with part1/part2, the screen transitions will be as follows:

<WRITING OK> COMPLETED

<ERASING> 080%

<ERASING> 100%

<WRITING> 010%

<WRITING> 100%

<WRITING OK>

COMPLETED

<PART1 WRITING OK>

REBOOTING…

<Network Checking…>

<ERASING> 080%

<ERASING> 100%

<WRITING> 010%

<WRITING> 100%

Rebooting… Rebooting…

Rebooting…

Rebooting…

STAND BY

STAND BY

Upgrade Completed

MANUAL FIRMWARE UPGRADE FOR THE KX-HDV130

Preparation and Procedure

8

© Panasonic Co., Ltd.

Manual Upgrade Overview This section covers upgrading device utilizing a server PC.

What you will need…

What is next…

Local Area Network (LAN)

Server PC connected to your LAN.

Personal Computer or Laptop connected to your LAN.

Abyss Web Server Software

Download the software https://aprelium.com/

Install the Abyss Web Server on your local Server PC.

Panasonic KX-HDV130 Firmware Files

Download the firmware files to your web server PC. https://panasonic.net/cns/pcc/support/sipphone/download/HDV1/us.html

Firmware File URL

Login to the KX-HDV130 WebUI with PC or Laptop.

Program the Firmware File URL under Maintenance tab.

9

© Panasonic Co., Ltd.

Software Installation

Run the Abyss Web Service installation file downloaded to the server PC from the website. Follow the instructions for basic installation.

1 2

3 4

4

5

10

© Panasonic Co., Ltd.

Setup Login Credentials

Follow the instructions for language setup and the username and password.

Choose your preferred language.

Set your login credentials. This will be the username and password used when logging to the Abyss Web Server.

When finished creating a username and password, Click OK. The browser will launch an authentication window. Enter the username and password from above.

11

© Panasonic Co., Ltd.

Change Firewall Settings

Communication will need to be allowed through the Windows Firewall. A rule must be created. Open the window’s firewall and add the Abyss Web Console to your software list.

1. From the left, choose the option to Allow a program (app) or feature through Windows Firewall. 2. Click the button at the bottom to Allow another program… 3. Select the Abyss Web Server program to highlight, then select Add. 4. This will add this program to the to the Allowed programs (apps) and features list. 5. This will bring you back to the previous selection screen. 6. Choose to allow for Private or Public as needed. 7. Check the desired options and click OK.

These options may vary based on version of Windows in use.

You can navigate to Windows Firewall settings through the Control Panel.

Alternatively, hold the + R on your keyboard. When the ‘Run’ box appears, enter firewall.cpl and press OK.

12

© Panasonic Co., Ltd.

Download Firmware

Once the Abyss Web Server has been given permission, it is time to download the firmware files from the Panasonic support portal and put them in the correct directory. Files are available for download on the global support portal: https://panasonic.net/cns/pcc/support/sipphone/download/HDV1/us.html Please unzip these files before use.

Copy your unzipped files “HDV130-06.000_US.fw.part1” and“HDV130-06.000_US.fw.part2” firmware files to the Abyss Web Server default directory: C:\Abyss Web Server\htdocs

13

© Panasonic Co., Ltd.

Upgrade Firmware

The final step is to start the download process in the device. The location of the firmware must be entered in the WebUI of the KX-HDV130.

1. In the web user interface, click the [Maintenance] tab from the top menu options. 2. Click [Upgrade Firmware] from the left menu options. 3. Enter the firmware file URL on the HTTP server. 4. Click the [Update Firmware] button to start the update process.

The unit will [restart] and display erasing percentage. Please refer to pages 5 and 6 of this document for a visual reference.

1

2

3

4

Note: If the update process does not start when using URL that does not have a port number (see above example), please specify the port. Ex: http://192.168.x.xxx:80/HDV130-06.000_US.fw.part1 Abyss Web Server use Port :80 as default

14

© Panasonic Co., Ltd.

Firmware Confirmation

Firmware information can be confirmed in the KX-HDV130 web user interface. This information can be reviewed both before and after the firmware update process.

1. In the web user interface, click the [Status] tab from the top menu options. 2. Click [Version information] from the left menu options.

IPL Version 01.0xx / 02.005 [SIP: x.xx]

or

IPL Version 02.005 [SIP: x.xx] *

IPL Version 01.0xx / 01.0xx [SIP: x.xx]

or

IPL Version 01.0xx / 01.0xx

or

IPL Version 01.0xx [SIP: x.xx]

or

IPL Version 01.0xx

Already Done

* Done at Factory

Not Done