FLOOR AND PAVEMENT PROJECTS - anconbeton.com · Kuala Lumpur, Malaysia MSAS Project Penang,...

Page 1

LEADING PRACTICAL SOLUTIONS FOR CONCRETE FLOORS

Greetings to all! Being involved in the construction industry is both a great opportunity and challenge!

ANCON is now more than 24 years old! ANCON initially started in 1996 as concrete construction consultants. In 2004, it expanded its horizons to become representatives for Somero

Enterprises Inc., suppliers of Somero Laser Screeds and also representing Allen Engineering, suppliers of construction equipment. These representations have continued successfully.

ANCON has very successfully introduced and supported customers with deployment of Allen & Somero products to build floors and pavements.

Equipment representation and customer support is from strong ANCON Team in Australia, New Zealand and South East Asia including Thailand, Vietnam, Singapore, Malaysia, Philippines and Indonesia. This structure allows ANCON to focus on its main business and supporting its equipment customers and building relationships.

Our representative team is presented on a separate document and on our website at www.anconbeton.com

Best regards,

Ian BurnettManaging DirectorANCON Beton PTY LTD

CONTENTSConcrete Floor Consultancy 2-8

Floor and Pavement Projects 2-3

World Of Concrete Asia 4

ANCON Floor Package 5-8SOMERO® 9-18S-22EZ Laser Screed 9S-15R Laser Screed 10S-10A Laser Screed 11S-940 Laser Screed 12S-485 Laser Screed 13Sky Screed TM 25 14

Mini Screed C 15

Somero Line Dragon 163-D Profiler System 17SITESHAPE System 17Floor Levelness System 17Support Kits 18ALLEN® 19-31

Truss Screed 19

Magic Screed 20

Triple Roller Tube Pavers 21Work Bridges 22HDX760 & HP205 Ride-on Trowel 23HDX600 24MSP475 & MSP 465 Ride-on Trowel 25MSP455 & MSP 445 Ride-on Trowel 26MP235 & MP215 & MP245 Ride-on Trowel 27Walk-Behind Trowels 28Pans and Blades 29Power Sprayer 30Hand tools 31Marshalltown® Hand tools 32ALLEN® Polishing Riders 33Axiom and Dipstick 34ANCON Equipment Accessories 35ANCON Warehouse and Customer Service 36

MD Message

Page2

www.anconbeton.com

Linfox QLD - Australia

Bunning’s StoresAustralia

Baulderstone, Brisbane AirportAustralia

Masters Store Springfield,Brisbane, Australia

Diary Giant WarehouseKuala Lumpur, Malaysia

MSAS ProjectPenang, Malaysia

Drag StripPerth

OKH HoldingsSingapore

CBC Construction - Ortholite ProjectVietnam

ILO Construction - Nestle Distribution Center

Tarlac, The Philippines

BSY ConstructionsThailand

Boustead ProjectSingapore

FLOOR AND PAVEMENT PROJECTS

Page 3


FLOOR AND PAVEMENT PROJECTS

Tunnel - Sydney Australia

RAAF Australia

Amart Warehouse, Brisbane Australia

Vadals Warehouse - Brisbane Australia

Nestle Project Malaysia

Speedcrete - JakartaIndonesia

CBC Construction - Batico FactoryVietnam

Coca Cola PlantBangladesh

CHRISTIANI & NIELSEN - ALLIANCE LAUNDRY SYSTEMS

Thailand

DINCO Engineering - Happy Furnitures Vietnam

Channakorn - BIG C MINI DISTRIBUTION CENTERThailand

MRC Global - RDCSingapore

Page4

www.anconbeton.com

WORLD OF CONCRETE ASIA 2019

PT MAU - Bandung, IndonesiaElevated Piles 30m wide. Using Somero® Laser Screed®

equipment and Allen Engineering Riding Trowels.

Golden Trowel Asia Awards are presented to the General Contractors or Floor Contractors who construct the most flat and level floors in Asia.It’s the honour for ANCON when its customers won 4 of total 9 awards in Golden Trowel 2019 Ceremony.

Channakorn Engineering Co., Ltd. - ThailandSlab on Ground 24m wide. Using Somero® Laser Screed®


MITRAMAS PTE., LTD - SingaporeNarrow Strip Casting for using Allen Engineering Truss Screeds.

BSY CONSTRUCTION CO., LTD, ThailandElevated Piles 18m wide. Using Somero® Laser Screed®


GOLDEN TROWEL AWARDS

FLOOR AND PAVEMENT PRESENTATION

Mr. CK Tan - ANCON Equipment specialist sharing knowledge about floor leveling and finishing

Mr. Chris Keen - ANCON General Manager sharing knowledge about pavement construction

Page 5


ANCON FLOOR PACKAGE (FOR SE ASIA ONLY)

What is a BAD FLOOR?

What is an ANCON FLOOR?

This floor was cheap to build however it is very expensive to repair and maintain. The total cost of this floor after rectification is much higher than the cost of an “ANCON Floor.”The floor defects are:• Low Surface Quality and High Abrasion• Not Flat or Level• Delamination Defects• Higher Surface Abrasion• Poor and inefficient for Operator• High Maintenance Costs• Poor Joint Performance

The “ANCON Floor” is defined as:• Flat & Level• Burnished with High Quality Surface or hard trowel finish• High Abrasion Resistance • Shake-On Hardener or no Shake-On Hardener• Far Less defects• Less Rectification Costs• Fast Track Program• Most Economical Construction Method• Joints square and level for smooth transition

Essential Elements of the “ANCON Floor”

1

2

3

4

5

Application of World’s Best Construction Practice – “ACI Standards”

A Rigid Construction Process is Followed

Latest Technology

Good Quality Materials - The Concrete Mix

World’s Leading Construction Equipment

Retail Floor Australia

Multi Level Warehouse floor, South East Asia

Page6

www.anconbeton.com


Specification Advice EdgeFormwork Joint Advice

Technology - World’s Best Practice

World’s Best Equipment

Concrete Supply & Mix Consultancy

Measurement

Curing

Trowelling Supervision, Trained & Experienced

Level & Strike Off with Laser Screed

GREAT QUALITY

The Process Steps and Outcomes

ANCON tailors packages of project management and floor construction consultancy combined with the right equipment to meet the needs of each customer and project.

ANCON has consulted, project managed and trained on approximately 1,000 sites in Australia, New Zealand and South East Asia over the past 18 years. ANCON’s vast knowledge and experience enables its team to advise and deliver quality results to its customer.

Warehouse Floor Melbourne Australia

ANCON FLOOR - The Process Segments

Page 7



I Meet with the customer and establish needs for immediate project and future projects.

II Specify equipment needs by way of:• Screeding and Leveling Equipment• Hand Tools and Straightening Tools• Finishing Machines

III

Measuring Equipment for Flatness and Levelness to ACI Standards

IV

Be at the jobsite location to train, and coach the contractors chosen “ANCON Floor” team to:• Assemble Equipment• Use the Equipment• Clean the Equipment• Trouble Shoot the Equipment• Service the Equipment

V

Send a Senior Floor Consultant to site to train and coach the contractors chosen “ANCON Floor” team to complete the process of floor construction including but not limited to:

• Formwork Set-Up• Pump Set Up• Concrete Placing• Concrete Rough Leveling• Concrete Fine Leveling• Use of Straightening tools to cut off the “bumps”• Walk-behind trowels to open the surface• Ride on Trowels with pans method• Ride on Trowels with blades for finishing• Application of curing compound• Floor Flatness and Levelness Measurement

• Measure floor with Dipstick or Axiom 1155 • Prepare report to ASTM 1155 & ACI 117 requirements (as well as TR34).

ANCON Training Southeast Asia

ANCON Coaching Southeast Asia

Essential Parts 0f the Process

Page8

www.anconbeton.com


The ANCON FLOOR SYSTEM is:-

• Flat• Level• Hard• Defect Free• Looks Good• Almost Nil Maintenance• Best Value for Money

The ANCON FLOOR is accomplished by ANCON assisting the following:

• Establish Customer Needs• Concrete Mix Review and Trial Mixes• Supply Equipment including Somero Laser Screeds and Allen Engineering

Walk-behind, Ride-on Trowels, Hand Tools and Straightening Tools. • Face Construction Technologies USA Dipstick or Axiom 1155• Equipment Trainer on site for 5-7 days• Floor Construction Consultant on site for 5 -7 days

ANCON will prepare a Floor Package to meet your needs!!!

ANCON has successfully delivered packages in:• Singapore• Thailand• Vietnam• Indonesia• Malaysia• Myanmar• Bangladesh• Australia• New Zealand• Fiji• New Caledonia

An example of the “ANCON Floor” system supplied to Bangkok, Thailand

Retail Floor Brisbane AustraliaWorld Class Floor

Page 9


Developed with customer feedback, Somero is proud to launch the new S-22EZ. As the most technologically advanced Laser Screed® machine available in the world, the S-22EZ is packed with features that give you the competitive advantage.

Equipped with 360° machine rotation, a 6.1m telescopic boom and your choice of pivoting screedheads, the S-22EZ continues the tradition of delivering the industry’s highest quality and production rates with unsurpassed maneuverability. The customized OASIS laser control system is simple to operate and is upgradeable as technology advances. A redesigned, EZ Clean Head reduces clean-up time and improves long term maintenance. New convenience features and redesigned storage compartments improve ergonomics around the machine and operator efficiency.

The S-22EZ options platform allows you to build the machine you need to meet your demands. Options include, but are not limited to: 3.7m or 4.2m head width, roller plow, on-board pressure washer with hose reel, operator heat, spray bar and the Somero Floor Levelness System®.

Features and Benefits• Full Color LCD Display w/ Integrated Diagnostics • EZ Clean Screed Head• Head Transport Stands• Column-Block Protection• Hydraulic Screed Head Rotation• 360° Machine Rotation• Somero Quick GradeSet SystemTM• Built-In Storage• Automatic Throttle• Programmable Quick Pass

Model S-22EZOverall Width 2.2m at outside of tiresOverall Length 8.4m (transport mode)Overall Height 2.5m top of seat backWeight (kg) 6,577 (with 3.7m Screed Head)Boom Reach (m) 6.10Screed Head Size (m) 4.3 / 3.7 (optional)Engine 65 HP / 48.5 kW Cummins Diesel QSS 2.8, Tier 4 FinalGrade Control System Open Architecture SOMERO® Integrated System (OASIS)

S-22EZ Laser Screed® equipment on the job

S-22EZ Laser Screed® Model Gold Support Kit Included, See Page 18 for Details

S-22EZ

• Illuminating Fuse Panel• OASIS Laser Control System• Soft Landing

Page10

www.anconbeton.com

S-15R

Model S-15RDimension - L x W x H (m)

6.25 x 2.21 x 1.93 (w/o masts)

Operating Weight (kg) 4,377 Boom Reach (m) 6.10Screed Head Size (m) 3.00 or 2.4 (optional)Engine 44.3HP (33 kW) Mechanical Naturally Aspirated Kubota DieselGrade Control System Open Architecture SOMERO® Integrated System (OASIS)

S-15R Laser Screed® equipment on the job

S-15R Laser Screed® Model Gold Support Kit Included, See Page 18 for Details

The S-15R Laser Screed® concrete-leveling machine screeds 18.6 m2 per pass with a 6.1 metres telescopic boom reaching out over the concrete. The powerful hydraulic system controls the elevation of the plow and auger to maintain grade so you can get a much smoother surface as compared to rigid mounting style machines, even with very low slump concrete!

The S-15R head is 3 metre wide at the stabilizers, with fully integrated head assembly plows, levels and consolidates in a single automated pass. The plow rakes down high concrete filling in low spots and the Somero® Quick Pass feature rakes down excessively high concrete without manual intervention. The hydraulically driven auger cuts the surface to grade and displaces excess concrete to the side via a double flight auger and the offset head design minimizes side overlap. An electric vibrator saves weight and applies equal harmonics across the entire vibrator width. The S-15R is a high performing and sophisticated machine with great value.

Additional features of the S-15R are:-

• 360° powered machine rotation• Compatible with the 3-D Profiler System®

• 4 wheel, crab steering• 4 Stabilizers in-line with wheels• Flip-down plow extension

Page 11


S-10A

S-10A Laser Screed® equipment on the job

NEW FEATURES:

• New 3 metres screed head allowing for 18.6m2 per pass

• Operator positioned in centre of machine for optimum operator sight line

• 6.1 metre boom

• Customised OASIS Laser Control System

• Compatible with the 3-D Profiler System®

• Easily transported on a truck or trailer

Model S-10ADimension - L x W x H (m) 21.7 x 2.0 x 2.1Operating Weight (kg) 3,515Boom Reach (m) 6.10Screed Head Size (m) 3.0Engine 35.0HP (26 kW) Kubota Diesel EngineGrade Control System Open Architecture SOMERO® Integrated System (OASIS)

S-10A Laser Screed® Model Gold Support Kit Included, See Page 18 for Details

The S-10A has been engineered for productivity and convenience. It is compact in size at just 3,515kg, but highly productive. With a 6.1 metre telescopic boom and our patented, fully automated, self-leveling 3 metre screed head, the S10A allows customers to screed 18.6m2 per pass. Due to its light weight, the S-10A can be transported on either a flatbed truck or a tow behind trailer. The S-10A has operator’s convenience unmatched in the industry. The Somero Quick Grade Set SystemTM enables the operator to easily and accurately set grade in minutes. With only two steps, the operator can easily assesses the centrally located operator platform for direct line of sight to the pour while screeding and the OASIS Laser Control System from Somero allows the operator to fine tune and calibrate the machine without leaving the operator area.

Page12

www.anconbeton.com

S-940

The S-940 provides unmatched versatility and simplicity with increased power and productivity! Available with a fully automated self-leveling screed head, raking/fine grade head, this powerful machine has fewer switches and an easy-access hinged console, making any job comfortable for your operator. This machine features an auger.

It has a foldable elevation beam that provides a narrower profile during transport with the added benefit of providing easy entry to jobsites. The off-set screed head provides less of an overlap per pass. With the option of a powerful diesel engine, this model is unstoppable.

Model S-940Height 5’ (1.5m)Weight (Gas Engine) 1,653 lbs (750kg) - with 10’ headWeight (Diesel Engine) 1,775 lbs (805kg) - Diesel engine with 10’ headLength 11’ (3.35m)Width 4’9” (1.45m) - Transport ModeHead Size 10’ (3m); 11’3” (3.4m) with Auger MotorHead Clearance 14 1/2” (.37m)Ground Clearance 10 3/4” (.27m)Standard Tire Ground Pressure 34 psi (234.4 Kpa)ATV Tire Ground Pressure 10 psi (68.9 Kpa)Engine Options Subaru EH65 (22hp-16Kw) or

Kubota DH 902 Diesel (24.8hp-18Kw)Fuel Capacity 4 Gallons (15L)Grade Control System OASIS (Open Architecture Somero Intergrated System)Elevation Control Dual Hydraulic Cylinders with Somero Quick GradeSet SystemTM

S-940 Laser Screed® Model Gold Support Kit Included, See Page 18 for Details

S-940 Laser Screed® equipment on the job

Page 13


S-485

This ride-on S-485 Laser Screed® model does more than just screed concrete, it also rakes to three operated controlled Somero® Quick Pass levels. This is just the beginning of what this machine can do for the contractor. The S-485 Laser Screed® machine is the right machine for contractors who want better performance when you encounter difficult applications such as:-

• Slab-on-Grade or Slab-on-Deck• Compatible with the 3-D Profiler System® (optional)• Chaired Rebar or Mesh or Fibres• Warehouses• Factories• Shopping Centres• Hard Stand Pavements

The benefits of the S-485 include:-• 3m head• Hydraulic vibrator with quick disconnect• Incredible Pulling Power• Easy to Operate• Stand on Ride on operation• OASIS Control System• Simple, Fast and Accurate Grade Set-up• Lightweight and Versatile• Screed in Any Direction• 4-Wheel Drive• Utilise as a Laser Screed or Laser Controlled Rake• Utilises Somero’s Proven Technology

Model S-485Dimension - L x W x H (m) 2.99 x 1.10 x 1.29 (at wheels)Operating Weight (kg) 493Engine 20.8 HP (15.5kW) – HONDA GX630Start Electric StartControl Manual throttle and choke with electric shutoffPropulsion 4-wheel drive with hydraulic drive motors Screed Head Width 3.0m and 1.8m (Rake / Sub-Grade Head)Ground Pressure 22 psi (28 kPa)

S-485 Laser Screed® equipment on the job

S-485 Laser Screed® Model Gold Support Kit Included, See Page 18 for Details

Optional Raking Head for S-485

The Raking Head is an option for raking the sub grade in preparation for casting the concrete slab. This provides for double use of the machine for slab or grade work

Page14

www.anconbeton.com

Sky Screed™ 25

Introducing the Somero® Sky Screed® 25. Through advancements in technology and feedback from our customers, the Somero Sky Screed® 25 machine is the first Laser Screed® machine in the world to allow screeding on structural high-rise and slab-on grade applications. The versatile articulating knuckle boom provides unparalleled versatility.

Labor Savings, Floor Quality and Increased Productivity are just a few of the benefits you will get using the Somero® Sky Screed® 25 machine. To reach over your projects and save time and money on your next project, get a Somero Sky Screed® 25 machine.

The lower frame has three (3) stabilizers. The upper frame and screed head rotate 360°, this provides the flexibility to screed around columns and other protrusions. The auger-less screed head allows for screeding in any direction, while the powerful vibrator motor consolidates the concrete. The elevation is controlled by Somero’s OASIS laser control system. This Laser Screed® machine is powered by a 32.5 HP / 24.2 kW Kubota gasoline engine with electric start. The machine functions are controlled via wireless control.

Features and Benefits• 25′ / 7.6m Knuckle Boom• OASIS Laser Control System• 8′ / 2.4m Floating Vibrator Screed Head• Somero Quick GradeSet System™• 360° Machine Base/Screed Head Rotation• Patented Self Leveling System – SLS• Set Up Jig• Wireless Remote Control• Auxiliary Power Unit• Programmable Quick Pass

Model Sky ScreedTM 25Dimension - L x W x H (m) 7.62 x 2.47 x 2.39 Operating Weight (kg) 4,100Engine 32.5 HP Kubota (24.2 kW)Screed Head Width (m) 2.4 Boom Reach (m) 7.6Sky ScreedTM 25 Laser Screed® equipment

on the job

Sky ScreedTM 25 Gold Support Kit Included, See Page 18 for Details

Note: There is a Sky Screed TM 35 machine available

Page15

www.anconbeton.com

Mini Screed™ C

The Mini Screed™ C provides superior producitivity and levelness on all types of job applications. Small commercial, upper deck and residential projects can now have the same high quality, professional Laser Screed® floors that you only expect on a large commercial project. Save on yield and reduce manual efforts on placements while improving floor quality. Mini Screed™ C Applications:

• Slab-on-Grade & Elevated Deck• Post Tension• Rebar• Chaired Mesh• Metal Deck• Radiant Floor Heating

Model Mini Screed™ CDimension - L x W x H (m) 1.84 x 0.78 x 1.04Operating Weight (kg) 213Tires (m) 0.64 x 0.20 x 0.36Engine 6.0 HP (4.47kW) ROBIN 4-Stroke Petrol Engine or

8.0 HP (5.9kW) HONDA GX240 Petrol EngineLaser Controls Trimble SSR ReceiversAuto Level StandardSelf propel StandardVibrator Soft Start StandardScreed Head Size (m) 1.8

Mini Screed™C on the job

Mini Screed™C Gold Support Kit Included, See Page 18 for Details

Page 16


Somero® Line Dragon®

In January of 2019, Somero acquired Line Dragon and the synergies from this acquisition have resulted in the industry’s most advanced Placer and Puller machine. Introducing the next generation, the Somero® Line Dragon® Line-Pulling and -Placing System.

Besides being the most nimble concrete placing machine on the market, this concrete hose pulling machine is sure to enhance productivity, create labor savings, and reduce the risk of injury associated with moving concrete pump hoses by hand.

Features and Benefits

• Improved Antenna Guard

• Toolbox, for remote storage

• Quick access to the hydraulic manifold

• Horn feature helps to eliminate hose pinching

• Protective cover for the hydraulic tank and gauges

• Improved clamp and seal to reduce wear on the elbow connector.

Model Somero® Line Dragon® Length (m) Puller: 1.8 Placer: 1.9Width (m) 1.3Height (m) Puller: 1.1 Placer: 1.1Operating Weight (kg) Puller: 521 Placer: 601Ground Clearance (m) 0.178-0.184Steering Angle 180 degEngine 11.7 HP (8.7kW) HONDA GX390 Petrol EngineStandard Tires (mm) Carlisle 457 x 216Somero® Line Dragon® on the job

Somero® Line Dragon® Gold Support Kit Included, See Page 18 for Details

Page17

www.anconbeton.com

3-D Profiler System®

The Somero® 3-D Profiler System® is a technological breakthrough which allows concrete to be placed over contoured sites (shaped like a golf course) automatically using a Somero Laser Screed®. The highly accurate screeding of concrete, until now restricted to single and dual plane applications, is now available to meet the demands of real 3-dimensional paving.

Concrete paving is a multi-billion dollar market and gaining momentum. A great opportunity exists for Laser Screed® equipment owners to capitalize by expanding services to include concrete paving. It can double the use of the S22EZ, S22E, SXP-D, S-15R, S-15m, S485, S940 and S840 Laser Screed®.The 3-D Profiler System® is ideal for use on parking lots, loading dock areas, service ramps, and driveways. It’s also being used to white top and repair roadways, runways, taxiways, and bridges. Slope and elevation changes are now completely practical and cost effective to achieve.

The 3-D Profiler System® is easy to learn and use. It is compatible with all of the latest Laser Screed models.

The 3-D Profiler System® comes complete with all necessary components to get you profitably paving right away.

Ever wish that you could have the simplicity of the Somero® 3-D Profiler System® for your motor grader? Now it’s possible with SiteShape™, which takes the same field-proven technology and adapts it to simplify your fine-grading applications. This system allows for grade shaping automatically using your motor grader, dozer, or other grading machine to meet the demands of real three-dimensional grade shaping.Ideal for use on parking lots, loading dock areas, service ramps, and driveways – it can also be used on roadways, runways, taxiways, or any multi-sloped surface. Slope and elevation changes are now simple, practical, and cost-effective to achieve. The SiteShape™ System is compatible with most makes and models of grade cutting machines.

The system uses most components of the 3-D Profiler System®

SITESHAPETM System

FLOOR LEVELNESS SYSTEM®

The first technology of its kind, the System monitors your Laser Screed® machine and operator performance, then reports alert percentages of issues. What does this mean? You can now receive instant feedback on the job if screed performance is decreasing.

The system is capable of detecting small changes which are typically not perceptible to the operator, making the system ideal for detecting issues with minimal operator effort and allowing them to adjust accordingly.

Page 18


SOMERO SUPPORT KITS

S-22EZ EMERGENCY SPARES KITGuard Auger Bearing Seal, Vibrator Bearings, Vibrator Motor, Compression Springs, Auger Motor, Auger Bearings, Hydraulic Return Filter, Hydraulic Pressure Filter, Angle Sensor, LR210 Laser Receiver, GCS21 DCB (only for GCS21 equipped SXP-D), Oil Filter, Air Filters, Fuel Filter, Fan Belt, Rocker Switches, Boom Cord, 8ft Coil Cable, Various Valves & Cartridges, Stabilizer/Steer/Auger Pressure Comp, Pod Bearings, Centaflex Element, Coupling Jaws CSV, Red Spider CSV, Snap Ring, Fiber Washer, Boom Roller Bearings, Multimeter, Hydraulic Pressure Sensor, Stabilizer/Steering Sensor Cable.

S-15R EMERGENCY SUPPORT KITSSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve, Auger Motor, Auger Bearing, Seal Guard, Auger Bearing Guard Spring, Vibrator Motor, Vibrator Isolators, Deadman Switch, Thumb Switch, Rocket Switches & Covers, E-Stop Assembly, Paddle Switch, Hydraulic, Engine Oil & Fuel Filters, Air Filters, Fan Belt, Stabilizer Catridge, Multi Meter, Ball Joint, Cotter Pin, Keyway

S-10A EMERGENCY SUPPORT KITSSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve, Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays, Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses

S-940 EMERGENCY SUPPORT KITSSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve, Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays, Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses

S-485 EMERGENCY SUPPORT KITSSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve, Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays, Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses

SKY SCREED 25Counterbalance Cartridge, Boom, Hyd Motor, Head Rotate, Vibrator, Electric Assy, Fully Clocked, Hyd Fit-ting/O-Ring Kit, Valve, Counterbalance, Head Lift/Osc Dir Valve, Valve, Proport. Flow Control Cart., Pressure Gauge,0-5,000 PSI, Inline Fuel Pump, Kubota WG972, Belt, Fan, Kubota D902, Spare Hose Kit, Hyd. Hose 1/4 x 35, Hyd Ftg, Swivel Run Tee 6M Jic to 6M Jic to 6F Jic, Hyd Ftg, Tube Reducer, 6F Jic to 4M Jic, Case - Large Line ESK, SSR2 Laser Receiver, Cable, AS212-S, Cable, 4 Socket M12 to DT04-3P Position Sensor, Lift Harness, 4-Legged

MINI SCREED C EMERGENCY SPARES KITSSR Control Box, SSR Receiver, PQ Sensor, Head Lift Linear Actuator, Plow Linear Actuator, Coil Cord to SSR Control Box, Vibrator Motor, Vibrator Isolators, Air Filter, Rocker Switches & Covers, Spark Plug, Receiver Pole Clamp, Rubber Seals Drive Guard, Hex Bit 1/8, Emergency Stop Assembly, Relays, Multimeter.

SOMERO LINE DRAGON EMERGENCY SUPPORT KITHydraulic Hose 1/4 x 35, Hydraulic Hose 3/8 x 30, Hydraulic Hose 3/8 x 96, Rotation Sensor, 270 Degree, Thread-ed Rod Link, LH, Threaded Rod Link, RH, Thrust Ring, 5” Placing Line, Gasket, 5” Hevi-Duty Snap Coupling, Master Link, #60H Chain, Safety Pin, Ring/Warning Tag 4” Snap Coupling, Filter Element, MP Filtri, Honda, Air Filter, 13HP Replacement Filter, Wear Pad, Retained 5”, Bearing Fiber.

Page19

www.anconbeton.com

*Hydraulic Powered Winch (Optional)

The Allen® Razorback® Truss Screed is the contractor’s preferred brand when high tolerance FL Numbers are specified on concrete floors and pavements. For more than 35 years, Allen Truss Screeds have set the industry’s standard for precision levelness, rigidity and durability. Allen Engineering has a full line of truss screed models and accessories.

FEATURES:

• Quick Disconnect System

• Low Profile Engine Option

• Wide Range of Horsepower Options

• Hydraulic Powered Winch is Optional

• Manual Winch is Standard

• Bolt-On Replaceable Blades

• Triangular Frame with Vibration Proof Welds

• Eccentric Vibrator Weights

• Replaceable, Greaseable Bearings

• Tough, strong and Durable

With Engine Options ranging from 9 hp to 11 hp, there’s a Steel Screed for virtually Every Size Floor Finishing or Paving Operation

Accessories & Options Available

Air Screed Option Available Bridge Deck Adjustable End Brackets

Pivot Brackets

RAZORBACK® SERIES TRUSS SCREED

Invert crown bracket for air screed shown

Model TRUSS SCREEDFrame Construction Steel or Aluminium (Optional)Vibration System Eccentric ShaftSection Length Weight (kg)0.61 metre (2.0ft) 17.00.76 metre (2.5ft) 20.01.50 metre (5.0ft) 41.02.30 metre (7.5ft) 61.03.1 metre (10.0ft) 82.0Maximum Width (m) 19.8Lowest Concrete Slump (mm) 50.0Blades 2.4mm Galvanised SteelWorking width (m) 3.0 to 20.0

Page 20


MAGIC SCREED®

The Magic Screed is a precision engineered, lightweight wet screed for single operator strike-off of concrete. Fast and easy to use, this high-frequency screed provides uniform distribution over the entire blade length, enhancing structural integrity of the concrete through consolidation.

Available Width (m)

Weight (kg)

1.22 3.01.83 4.02.44 6.03.05 7.03.66 9.04.27 11.04.88 12.0

Model HD7070Engine Honda™ GX35

4-Stroke 35ccHandles AdjustableWeight (kg) 13.5

FEATURES:

• Smooth Operating Throttle

• Lightweight, but Powerful Honda™ Engine

• Ergonomically Designed Grips and 360-degree adjustable handles

• Tilt-Up StandaAnti-Vibrating System to focus vibration on the blade, not the handle

• Quick-Change Screed Blade with unique design

• Carrying Bar for every job movement

Quick-Change Blades Unique, patented blade

Magic Screed® on the job

Handles can be adjusted for height, twisted to the inside or outside and have the angle adjusted for maximum ergonomic support.

Page21

www.anconbeton.com

TRIPLE ROLLER TUBE PAVERSAllen Triple Roller Tube Pavers (TRTP) are specifically designed for paving large civil projects fast, accurately and efficiently. These pavers are not only the best engineered for their tasks, they’re the best value. Allen is so confident in their Paving Equipment that they back them with a Two Year Warranty! Available in a variety of standard configurations, Allen will also customize their equipment to fit your specific paving projects.

Precision engineered tubes ensure the smoothest pavement possible. Powered by rugged Diesel Engine, with easy to operate control systems, the Triple Roller Tube Paver can strike off concrete fast. And with Allen’s precision engineered and level-tested roller tubes, you can be assured of producing the flattest paving job possible.

FEATURES:• Operational Gang Vibration System for up to 610mm deep concrete

consolidation

• Vibrator Head Diameter: 60 mm

• Vibrator Head Length: 600 mm

• Three Super-Flat Roller Tubes

• Vibrator Spacing: 610mm center to center with radius of effectiveness up to 480mm

• Water Spray System keeps Tubes clean and smooth

• Pendulum Shaft Driven Vibrators can be adjusted from 0-11,000 VPM from operator console

• Vibration System is hydraulically folded inside the paving machine for transportation ease, not requiring disassembly of the gang.

• Safety Enhancements: enclosed access platform, machine shut down switches on all corners of the machine, safety strobe beacon, LED operation lights

Model TRTP275Engine Hatz 4H50TIC (T4F)Horsepower Class 74 hp (55 kW)Fuel Type Liquid-Cooled DieselFuel Capacity 10 gal (37.85 l)Widths Available 16 - 32 ft (4.88 m - 9.75 m)Roller Tube Diameter 10 in (25.5 cm)Roller Tube Wall Thickness 0.25 (6.35 mm)Tube Weight Per ft 27 lbs (12 kg)Tube Rotation Speed 0 - 180 rpmAverage Paving Speed 0’ - 25’ per minuteHydraulic Oil Reservoir 25 gal (95 l)Hydraulic Spray System 50 Gallon TankHydraulic Steering Leg StandardCounter Balance Tube Weight with Water

30 lbs (13 kg) per foot

*TRTP275

TRTP275

Page 22


WORK BRIDGESAllen Work Bridges are available in several sizes. Allen Work Bridges can be customized for every application. These work bridges are ideal for joint work, applying curing compounds, bull-floating, applying textures or whenever bridging is required. The Allen Work Bridge is an economical workhorse on any job site.

Non-Powered Model WB1224Frame Dimension D x W (mm) 300 x 610Max. Machine Length (m) 20Available Sections (m) 2.28 / 1.52 / 0.61Telescopic Sections N/A

Powered Model PWB1824 PWB2434Engine Honda® GX270 (270cc) Honda® GX270 (270cc)Frame Dimension D x W (mm) 46 x 61 61 x 86Max. Machine Width (m) 32.0 36.5Available Sections (m) 3.66 / 1.83 / 0.91 3.66 / 1.83 / 0.91Telescopic Sections (m) 4.57 – 7.62 4.57 – 7.62

Paving Wheel Attachment Option

*WB1224 with pneumatic tires

(foam filled tires optional)

Bridge Deck Wheel Attachment Option

Page 23


HDX760 & HP205The Allen HDX760 Riding Trowel truly stands alone in the industry with the built-in ‘IntelliPower’ system that controls both the hydraulics and the engine operation. With ‘IntelliPower’ the 74hp T4F Hatz diesel engine and the Bosch-Rexroth hydraulic components actually talk to each other to ensure maximum performance and safety at all times. This results not only in unequaled performance and safety protection for these very expensive and critical engine and hydraulic components, but also much longer operating life expectancy.

Model HDX760 (T4F) HP205Engine 74HP Hatz 4H50TIC 2 x 37HP Kohler ECH980 (999cc)Dimension - L x W x H (m) 3.12 x 1.59 x 1.58 3.14 x 1.61 x 1.58Panning Path Width (m) 2.99 2.99Rotors Diameter (m) 1.46 (6-Bladed Spider) 1.46 (6-Bladed Spider)Maximum Rotor Speed (rpm) 145 180Operating Weight (kg) 1,219 983Steering Power PowerFuel Capacity (litre) 41.6 46.0

HP205 in operation

The HP205 High Performance series of riding trowels, feature twin gasoline engines. The both machines are workhorses built for concrete professionals that delivers maximum horse power with electronic fuel injection. They provide excellent low speed torque for low speed float panning and superior high rotor speed for finishing concrete..

HDX760 in operation

Page 24


HDX600 RIDE-ON TROWELDesigned to satisfy the most demanding concrete contractors, the Allen HDX600, Hydraulic-Powered Riding Trowel is packed with the punch of a high-horsepower diesel engine and is the most powerful rider in its class and also one of the most dependable.

With ideal weight to horsepower ratio and hydraulic components (including a patented automatic load sensing device), the HDX600 ensure a peak performance every time.

Model HDX600 T4 HDX600 T3Engine 50 HP Hatz 3H50TIC 44.2 HP Kubota V1505-T-E3BDimension - L x W x H (m) 2.72 x 1.33 x 1.55 2.74 x 1.28 x 1.28Panning Path Width (m) 2.54 2.54Rotors Diameter (m) 1.17 (5-Bladed Spider) 1.17 (5-Bladed Spider)Maximum Rotor Speed (rpm) 165 135Operating Weight (kg) 995 735Fuel Capacity (litre) 49.2 41.6

FEATURES:

• Adjustable Seat and Arm Rests

• Generation III (All Hydraulic Proportional) Joy Stick Power Steering

• Four Lights in Front and Back

• Independent Hydraulic Blade Pitch Controls

Hydraulic Joy Stick Power Steering makes maneuverability smooth and easy HDX600 in operation

*Shown with Allen Steel Pans

Page 25


MSP475 & MSP465 The MSP465 & MSP475 were designed with the high volume flatwork concrete contractor in mind. These riders are mechanically-driven, eight foot class ride-on power trowels.

They come with powerful 57 hp Kubota liquid-cooled gasoline engines that keep machines running cooler, and digital readouts for accurate fuel levels and diagnostics, and a large fuel tank for longer run times.

These riders produce excellent torque even at high rotor speeds which make them excellent for panning or finishing operations.

Model MSP475 MSP465Engine 57HP Kubota WG1605 57HP Kubota WG1605Dimension - L x W x H (m) 2.54 x 1.28 x 1.53 2.54 x 1.28 x 1.53Panning Path Width (m) 2.57 2.57Rotors Diameter (m) 1.16 (5-Bladed Spider) 1.16 (5-Bladed Spider)Maximum Rotor Speed (rpm) 160 160Operating Weight (kg) 741 741Steering Power ManualFuel Capacity (litre) 45.4 45.4

MSP475 in operation

Bilingual digital display conveniently shows engine diagnostics (temp, RPM, oil pressure, warnings, etc.

Page 26


MSP455 & MSP445 Allen’s MSP series is the most popular series in their ride-on trowel line up. You can now choose between the MSP445 (manual steer) and the MSP455 (Power Steer). Both models offer a powerful gasoline engine, Super Heavy-Duty Gearboxes and Spiders to provide a great weight to-horsepower performer for larger contractors. The MSP445 and MSP455 are both easy to control and steer. Standard features include an electric-powered spray system and built-in cup holder. Both models are powered by the Kohler 37HP gasoline engine and both come with all of the standard features of an Allen ride-ontrowel.

Model MSP455 MSP445Engine 37HP Kohler Air-Cooled Gasoline 37HP Kohler Air-Cooled GasolineDimension - L x W x H (m) 2.54 x 1.28 x 1.47 2.54 x 1.28 x 1.47Panning Path Width (m) 2.48 2.48Rotors Diameter (m) 1.17 (5-Bladed Spider) 1.17 (5-Bladed Spider)Maximum Rotor Speed (rpm) 165 165Operating Weight (kg) 533 477Steering Power ManualFuel Capacity (litre) 23.0 23.0

FEATURES:• Adjustable seat that flips up for easy access• Built-In Cup Holder• Independent Manual Pitch Control• Light Switch, Key Switch, Hour Meter and 12 Volt

Charger All in One Location• Detachable Front Access Panels• Powered Spray System• Torque Converter Clutch for True Variable Speed• Four Lights in Front and Back• Five-Bladed Spider• Super Heavy-Duty (SHD) Gearbox• Hydraulic Joy Stick Power Steering

MSP445 in operation

Page27

www.anconbeton.com

MP235 & MP215 & MP245 The Mechanical-Drive Pro (MP) Series is Allen Engineering’s entry-level rider complete with features found on the larger riders and the renowned durability of all Allen Equipment. These riders are available in convenient sizes and are equipped with high-horsepower gasoline engines, heavy-duty drivetrains and packed in easy-to-service frames. Allen’s Standard-Duty Gearboxes and four-bladed rotors are proven performers in the field.

FEATURES:

• Adjustable seat that flips up for easy access• Built-In Cup Holder• Independent Manual Pitch Control• Light Switch, Key Switch, Hour Meter and 12 Volt Charger All in

One Location• Detachable Front Access Panels• Powered Spray System• Torque Converter Clutch for True Variable Speed• Four Lights in Front and Back• Five-Bladed Spider with Super Heavy-Duty (SHD) Gearbox• Manual Lever Steering

*Shown with Allen Steel Pans

Model MP235 MP215 MP245Engine 22.1HP HondaTM GX690 Air-

Cooled Gasoline (688cc)22.1HP Honda™ GX690 Air-Cooled Gasoline (688cc)

22.1HP Honda™ GX690 Air-Cooled Gasoline (688cc)

Dimension - L x W x H (m) 2.18 x 0.99 x 1.35 1.98 x 1.04 x 1.35 1.98 x 1.04 x 1.35Panning Path Width (m) 2.16 1.88 1.88

Rotors Diameter (m) 0.91 (4-Bladed Spider) 0.91 (4-Bladed Spider) 0.91 (4-Blade Spider)Maximum Rotor Speed (rpm) 145 145 165Application Edging, Finishing and Panning Finishing and Panning Finishing and PanningOperating Weight (kg) 355 333 376Fuel & Retardant Capacity (litre) 23.0 23.0 23.0Steering Manual Manual Power

Page 28


PRO SERIES WALK BEHIND TROWELS

Engineered for the concrete professional, Allen® Walkers are designed to produce high tolerance concrete floors (as measured by F-Numbers) with high-quality features that are hard to find on other trowels.

Allen Pro-Series Walkers feature precision engineered Allen Gearboxes for long, trouble-free life. They use cast iron spiders, pressure plates and lift levers for long wear and continuous service.

Allen precision machines the trowel arms and spiders to such close tolerances that our trowels don’t need bushings.

And, their high strength steel handle provides maximum comfort and control and ease of use.

Allen’s commitment to product quality, attention to detail and 100% product testing ensures that your Allen Walker will provide years of high performance and trouble-free operation on the job.

Model PRO 446 PRO 436 PRO EDGER 436 VP424Engine Honda™ GX270 (270cc) or

GX340 (389cc)Honda™ GX160 (163cc) or GX270 (270cc)

Honda™ GX160 (163cc) or GX270 (270cc)

Honda™ GX120 (118cc)

Dimension - L x H (m) 2.26 x 0.99 1.78 x 0.97 2.13 x 0.97 1.65 x 1.09Rotors Diameter (m) 1.17 (4-Blades) 0.92 (4-Blades) 0.92 (4-Blades) 0.61 (4-Blades)Maximum Rotor Speed (rpm) 118 118 118 135Operating Weight (kg) 123 101 89 55Trowel Arms & Spiders Standard Duty Standard Duty Standard Duty Standard Duty

FEATURES:• Fingertip Throttle Control

• Padded Handles

• Safety Switch On Handle

• Allen Standard-Duty Gear Box

• Wide Range Of Horsepower Available

• Lifting Hook

• Lifting Bar

• Torque Converter Clutch

• Stabilizer Ring

• Cast Iron Spiders, Pressure Plates And Lift Levers

• Height Adjustable Handle

PRO446

PRO436

PRO EDGER 436

VP424

Page29

www.anconbeton.com

PANS AND BLADES

Allen Engineering pioneered the use of floating discs (or pans) on riding trowels in 1989 and Allen® Pans remain today the finisher’s choice when high FF Numbers are specified on a concrete floor. Allen’s flat pan tolerances cut bumps and fill low spots in the concrete floor. Insist on Allen® Steel Pans for your Allen Riders and Walk-Behinds. Made to the same exacting tolerances as the trowels themselves, nothing finishes better.

STEEL FLOAT PANS

TROWEL BLADES

TWO TYPES OF PANS Allen offers both Flat (0” to 1/8” dish) and Mild-Dished (1/4” to 3/8” dish) steel pans. This gives contractors even more pan choices from Al-len.

Safety Catch Pan Clip-On Pan

MADE INTHE USA

Allen Engineering offers a complete line of finish blades, combination blades and clip-on float shoes for your walk-behind or ride-on power trowels. We use high quality steel or composite plastic with six high strength rivets to maximize blade life. For the flattest floors, trust only Allen Finishing Blades. And, Allen Blades fit most other brands of walkers and riders.

Finish Blade Flat Finish Combination Blade Finish Blade

Plastic Silver Blue Gold

Page 30


POWER SPRAYERS

Allen’s powerful, reliable and durable Power Sprayers are the preferred tool for applying release agents, water-based sealants and curing compounds on concrete construction sites. The continuous recirculating system ensures your material is always well mixed and ready to spray. Available in barrel, cart, tow or skid mount.

Model 9910 7560XLEngine Honda™ GX160 (163cc) Honda™ GX120 (118cc)Maximum Flow Rate (litre/min) 36.0 28.4Pump Type Diaphragm Roller BallHose Type Hydraulic 3/8”Lock-OnOperating Weight (kg) 61 48

Barrel Mount Configuration is Standard

7560XL Shown *9910 shown with optional Tow Cart*9910 shown with optional Push Cart

FEATURES:

• Spray Gun with Fan Tip 4020 and 30.5 m (100’) of hose is standard on Sprayers.

• Foam Filled Tires optional on all carts.

• All materials must be thoroughly mixed before spraying.

• Sprayers are intended for spraying Form Release Agents, Water Based Concrete Sealants, and Concrete Curing Compounds.

• Allen Sprayers are not intended for spraying any types of Asphalt Sealants. Spraying of any type of asphalt sealers will cause damage to the pump and will not be covered by warranty. 7560XL Power Sprayer on the job

Page31

www.anconbeton.com

ALLEN HANDTOOLSChecked to exact flatness tolerances, our extruded magnesium Allen Hand Tools are specifically designed to improve floor or pavement levelness and flatness. Each tool comes standard with three 1.8 m snap-together aluminum handles. These hand tools are available with either the Rock-It or Equalizer pitch adjusting head for precise, even control.

Bump Cutter: Cuts down bumps and fills low areas after concrete slab has been floated.

Channel Float: Use in lieu of traditional bull float for flatter floors and pavements.

Check Rod: Reduces bumps and fills low areas while the concrete is still plastic.

*Bump Cutter

*Check Rod

*Channel Float

Mesh Roller: Ideal for embedding exposed aggregate and quickly levels slab and prepared it for final finish.

*Mesh Roller

Model Tool Widths (m) Channel/Beam Dimension

Channel Float 1.5 - 3.7 152 mmCheck Rod 2.4 - 4.9 51 x 102 mm

Bump Cutter 2.4 - 4.9 51 x 102 mmMesh Roller 0.46 - 1.27

Page 32


MARSHALLTOWN HANDTOOLS

• Broken-in shape eliminates line and ripple

marks right from the start

• Beveled work edges prevent surface

aggregate popping

• PermaShape® guarantees trowel will remain

original broken-in shape

• Sold 1 per inner pack/12 per outer pack,

• 6 per outer pack where noted with *

• Lightweight aluminum construction

• Can be used as a screed, float or check rod

• Dual-edge design, sharp edge for cutting and round edge for

floating concrete

• Attach handle to the bottom side of screed for double the life

• Handle adjusts to desired position for better comfort

• 13745 & 13746 ship LTL

• Sold 1 per inner pack/1 per outer pack

• Lightweight aluminum construction

• Power coated with soft grip end-cap

• Braced for additional strength


• Extruded from very hard, curable, lightweight magnesium

• Most popular float design

• Comfortable handle is positioned to give the tool perfect balance

• Recommended for use with air entrained concrete


PermaShape® Finishing Trowels Beveled End Magnesium Hand Floats

Combo Screed All Aluminum Placer

Size (mm)305 x 76

305 x 102

356 x 76356 x 102

356 x 127

406 x 102406 x 127 *

457 x 107 *457 x 127 *

508 x 102*508 x 127*

Size (mm)406 x 79508 x 79

Size (mm)1.8m x 51mm x 41mm2.4m x 51mm x 41mm

Size (mm)492 x 102

American Made with American Materials and Design

BUILT TO LAST!*For sale South East Asia and not in Australia & New Zealand

Page 33


POLISHING RIDER RP235 & RP245 The RP235 and RP245 were designed with the high volume concrete polisher in mind. These riding trowels come as designed to achieve high rotor speeds to achieve high torque while polishing, and they also come equipped with special dolly jacks that ensure transportation indoors can be done with ease, as well as allowing for quick change of polishing pads. These designs are also built on our popular edging riding trowel frame to allow contractors to get extremely close to the wall while polishing

Model RP235 RP245Engine 25HP KOHLER PCH740 25HP KOHLER PCH740Dimension - L x W x H (m) 2.20 x 0.96 x 1.40 2.20 x 0.96 x 1.43Panning Path Width (m) 2.14 2.14Rotors Diameter (m) 0.91 (4-Bladed Spider) 0.91 (4-Bladed Spider)Maximum Rotor Speed (rpm) 180 180Operating Weight (kg) 497 519Steering Manual Power

Kohler propane engine provides clean power for indoor polishing applications

Torque convertor clutch helps ensure high power output to achieve high rotor speeds

Romovable front cover for quick access for maintenance needs

Page 34


With the Contractor in mind the Axiom 1155 from the Somero Matson Group brings both simplicity and ease of use to the forefront in its compact, lightweight, and robust design. Built on the Android operating system, the Axiom 1155’s Measurement and Layout Companion apps can be used with a Bluetooth enabled Android phone or tablet of choice. The average user now has the ability and guidance to reliably and precisely test floors in accordance with the latest ASTM E1155 standards, or test joint stability (Deflection) in accordance with ACI 360R-10 section 6.2.

Key features and benefits:• Easy of use• Multi Purpose Platform: FF/FL Floor Profiler or Deflection Meter• Instantly shareable data with real-time results• Automatic report generator• System Accuracy: +/- 0.0015 inch/foot• Dual axis inclinometer technology for stability control and enhanced repeatability• Collapsible and detachable hardware for easy transport and travel• Manufactured with lightweight and durable alloys• Internal Sensors are rated to withstand a 9’ drop• ASTM E1155-14, ASTM E1155M-14 and ACI 360R-10 Section 6.2 compliant• Android operating system• Rated for 25 hours of continuous use powered with 5 AA batteries• Ability to delete a point taken by mistake during the measurement process

Axiom 1155

Dipstick 2285The Dipstick Auto-Read Floor Profiler is a totally integrated data collection instrument that provides a fast and accurate method of measuring floors for flatness and levelness using the American Concrete Institute (ACI), Canadian Standards Association (CSA), and American Society for Testing and Materials (ASTM) standards.

At ANCON, we provide comprehensive training floor measurement according to ASTM E1155, Fmin, TR34 4 Edition, DIN 18202

Page35

www.anconbeton.com

ANCON Equipment Accessories

GL722 Laser Transmitter(800m Working Diameter)

LL500 Laser Transmitter(500m Working Diameter)

Tripod for Laser Transmitter Column Clamp for Laser Transmitter

Standard Motorcycle Tyre/Wheel High Flotation Tyre/Wheel Nylon Lift Harness Chain Link Lift Harness

Auger Kit

Nylon Lift Harness Chain Link Lift Harness Ride-On Trowel Dolly Jacks

SOMERO EQUIPMENT ACCESSORIES

ALLEN ENGINEERING EQUIPMENT ACCESSORIES

Ramps for Large Line Laser ScreedsPower Washer

SAE/Metric “Allen” Tool Kit

Page36

www.anconbeton.com

ANCON Locations & Customer Service

ANCON’s warehouse and service center is in Melbourne, Australia.The Melbourne Warehouse is the main support center for ANCON’s customers in Australia, New Zealand and South East Asia.

ANCON Support Consists of:• Customer Support via Phone and Email• On-site Equipment Service and Support• Spare Parts and Accessories

Melbourne, unloading Allen equipment Melbourne, Australia Somero Stock

Onsite Allen Equipment Service Onsite Somero Equipment Service

MELBOURNE OFFICE /WAREHOUSE

33/111 Lewis Road, Knoxfield, Victoria 3180PO Box 4506, Wantirna South, Victoria 3166

Phone: +61 3 9801 6600Email: [email protected]

BRISBANE OFFICE Unit 1 / 35 Manton Street

Morningside, QLD Australia 4170


ADELAIDE OFFICEShop 6, Level 1, 194 Prospect Rd

Prospect, South Australia 5082PO Box 421, Glenside, South Australia 5065


AUSTRALIA

SE ASIAMALAYSIA Johor Bahru


VIETNAM / INDONESIAHo Chi Minh City

Phone: +84 981 204080Email: [email protected]

THAILANDBangkok


THE PHILIPPINESManila


SYDNEY OFFICE Unit 2 / 26 McIlwraith Street

Wetherill Park NSW Australia 2164


Page37

www.anconbeton.com

NOTES

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

............................................................................................................................................................

...........................................................................................................................................................* Product Note:All the products have a range of options and it is the responsibility of the purchaser to veryfy the options and accessories needed.

** Disclaimer:1. The document and its content, including its images, are provided by individual manufactures / principals / business partners & ANCON makes neither a representation or confirmation to the information that is in this document to be accurate, complete or up to date. ANCON disclaims all misrepresentations or errors to the fullest extent permitted by law. 2. the image taken on sites were not under the control of ANCON and ANCON fully endorses correct practice with regards to Occupational Helathy and Safety. 3. Please note that a high quality floor construction process depends on a number of factors including trained staff, good quality concrete and strict adherence to a proper process. ANCON’s most up to date company’s books are located on its website, www.anconbeton.com

Date post:	01-Aug-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

FLOOR AND PAVEMENT PROJECTS - anconbeton.com · Kuala Lumpur, Malaysia MSAS Project Penang,...

Documents