FLOOR COLLAPSE PROP

COMPLETE FLOOR COLLAPSE PROP

DIMENSIONS: 48” W, 48” H, AND 8’ L. CONSTRUCTED OF PALLETS, 2X4s, AND PLYWOOD

WE ARE GOING TO MAKE ANOTHER HOLE THAT IS MORE JAGGED. THIS WILL BE 48” WIDE AND 8’ LONG AND WILL BE PLACE ON TOP OF THIS ONE WITH FOAM INBETWEEN TO SIMULATE A UNSTABLE FLOOR

BOTTOM OF FLOOR BEFORE HOLE CUT.

PROP WITH PLYWOOD PLACED OVER THE HOLE SO THAT IT CAN BE USED AS A HALLWAY PROP

BRACING AT TOP OF PROP FOR STABILITY OF SIDES

PROP WITH HOLE IN FLOOR

COVERING OF PLYWOOD SO PROP COULD SIMULATE A HALLWAY. THIS IS USEFUL FOR HOSE HANDLING IN NARROW SPACES, ESPECIALLY TURNING 180 DEGREES AND ACTIVATING HOSE WITHOUT KINKING

PROP IN PLACE OVER FLAT ROOF VENTILATION PROP

VIEW THROUGH HOLE TO FLOOR OR LOWER ROOM WHERE MATTRESS AND CUSHIONS ARE PLACED ON FLOOR FOR SAFETY

PROP OVER FLAT ROOF VENTILATION PROP

CUSHIONS PLACED UNDER PROP TO SIMULATE A

UNSTABLE FLOOR

VIEW FROM ROOM UNDER THE ROOF

MATTRESS AND CUSHIONS PLACED FOR SAFETY

REMOVABLE EXTENSION TO THE PROP. THIS CAN BE USED TO SIMULATE A LONGER HALLWAY IF PALLETS ARE PLACED ON SIDE OR PLACE AGAINST A WALL

PALLETS CAN BE NAILED ALONG EACH SIDE OF THE

EXTENSION TO MAKE LONGER HALLWAY