FLUID END PUMP PARTS TRIPLEX MUD PUMPS - Scomiscomi.com.my/gui/pdf/dmw_case_history/ofd_fepp_prod...

FLUID END PUMP PARTSTRIPLEX MUD PUMPS

PRODUCT CATALOGUE

Realising Potential in Oilfield Services

To ensure and enhance quality standards and operations, all our products are manufactured to the highest standards of API, ASME, DNV and ISO, and are subject to rigorous inspection.

Scomi Oiltools also acts as a representative for numerous service companies and manufacturers worldwide. Through mutual agreements, some of these companies are able to utilise our facilities and infrastructure to bring in their products, thus enabling us to introduce some high quality, cost-effective products and services to our global customers.

At Scomi Oiltools, we are constantly on the look-out for ways to assist our customers in realising their potential and optimising their drilling operations. We are wholly committed to providing the right products that will help our customers drive their business to new levels of performance.

Scomi Oiltools – Realising Potential.

As one of the world’s leading providers of Oilfield Services, Scomi Oiltools offers a diverse range of products, including some of the best brands in the industry.

Scomi Oiltools is in no way affliated with any company listed in this catalogue other than Scomi Oiltools. Reference to company names and company part numbers are for identification only and are not trademarks or trade names used by or affliated with Scomi Oiltools.

TABLE OF CONTENTSFLUID END EXPENDABLE PARTS

National 7-P-50 18-P-80 29-P-100 310-P-130 412-P-160 514-P-220 6JWS-165L 7JWS-340 8JWS-400 9

Continental EMSCOF-350 10F-500 11F-650 12F-800 13F-1000 14FA-1300 TYPE II 15FA-1600 TYPE II 16FB-1300 17FB-1600 18

Gardner DenverPAH-BFB 19TEE-BFB 20PY-7 21PZ-7 22PZ-8 23PZ-9 24PZ-10 25PZ-11 26

OilwellA-350-PT 27A-560-PT 28A-600-PT 29A-850-PT 30A-1100-PT 31A-1400-PT 32A-1700-PT 33

IdecoT-500 34T-800 35T-1000 36T-1300 37T-1600 38

BOMCOF-1600 39

Hong Hua F-1000 40F-1600 41

Wirth TPK-1300 42TPK-1600 43

OPI 700 HDL 44

FLUID END MODULES & ACCESSORIES

National7-P-50 46 / 478-P-80 48 / 499-P-100 50 / 5110-P-130 52 / 5312-P-160 54 / 55

Continental EMSCO F-350 | F-500 | F-650 56 / 57F-800 | F-1000 58 / 59FB-1300 | FB-1600 60 / 61

Gardner DenverPZ-7 | PZ-8 PZ-9 62 / 63PZ-10 | PZ-11 64 / 65

OilwellA-600-PT 66 / 67A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT 68 / 69

Ideco T-500 | T-800 | T-1000 70 / 71T-1300 | T-1600 72 / 73

TRIPLEX MUD PUMPS

FLUID END PUMP PARTS

TRIPLEX MUD PUMPS

FLUID END EXPENDABLE PARTS

Europe T +441224719200 F +441224708677 E [email protected] East T +97148838236 F +97148838920 E [email protected] T +12812606016 F +12812606969 E [email protected] T +60320805080 F +60320805083 E [email protected] Africa T +2348034028010 F +19526748453 E [email protected]

Printedonenvironmentallyfriendlypaper•FEPP-Rev1108

Regional Contact Points

FLUID END PUMP PARTS 1

NATIONAL 7-P-50 6¾” x 7¾”

LINERS & LINER SEALS

SIZE HIGH CHROME CERAMIC ZIRCONIA LINER SEAL

4” SO-0257-40-HC SO-0257-40-CZ SO-G-0272

41/2” SO-0257-44-HC SO-0257-44-CZ SO-G-0274

5” SO-0257-50-HC SO-0257-50-CZ SO-G-0276

51/2” SO-0257-54-HC SO-0257-54-CZ SO-G-0278

6” SO-0257-60-HC SO-0257-60-CZ SO-G-0280

61/4” SO-0257-62-HC SO-0257-62-CZ SO-G-0268

VALVES, SEATS, SPRINGS & INSERTS STYLE STEM GUIDE FULL OPEN (CROSS ARM)

VALVEASSY-Urethane SO-U5B-05 SO-5-V1

VALVEASSY-UrethaneHT SO-U5B-05-HT SO-5-V1-HT

VALVEASSY-Rubber SO-5B-05 SO-5-V1R

SEAT SO-5DD-B3 SO-5-S3

SPRING SO-5710-111 SO-5710-110

INSERT-Urethane SO-UDD-5B SO-5-I

INSERT-UrethaneHT SO-UDD-5B-HT SO-5-I-HT

INSERT-Rubber SO-DD-5B SO-5-IR

SEAT PULLER ASSEMBLY *Doesnotincludepullerhead

PULLERASSEMBLY* SO-1700 SO-1700

PULLERHEAD SO-1700-5 SO-D-5

PISTONS

BORE HUB REPLACEABLE PISTON SINGLE DUROMETER DUAL DUROMETER URETHANE BONDED Ø SIZE RUBBER PISTON REPLACEMENT URETHANE URETHANE HIGH TEMP.SIZE ASSY RUBBER KIT BONDED BONDED

4” 11/2”&15/8” SO-40-HK-14/15 SO-40-HK SO-40-U SO-40-3 SO-40-3-HT

41/2” 11/2”&15/8” SO-44-HK-14/15 SO-44-HK SO-44-U SO-44-3 SO-44-3-HT

5” 11/2”&15/8” SO-50-HB-14/15 SO-50-HB SO-50-U SO-50-3 SO-50-3-HT

51/2” 11/2”&15/8” SO-54-HB-14/15 SO-54-HB SO-54-U SO-54-3 SO-54-3-HT


61/4” 11/2”&15/8” SO-62-HL-14/15 SO-62-HL SO-62-U SO-62-3 SO-62-3-HT

PISTON RODS, EXTENSION RODS & ACCESSORIES

DIAMETER PISTON ROD EXTENSION ROD ROD CLAMP SUB ROD PISTON ROD NUT

PARTNO. 15/8” SO-0257-A SO-16-0257 SO-24-0257 SO-0257-B SO-7403364

TRIPLEX MUD PUMPS

GASKETS

VALVE CAP (HT) SO-61-0253 – CYLINDER HEAD (HT)

NATIONAL 8-P-80 6¼” x 8½”



4” SO-0256-40-HC SO-0256-40-CZ SO-G-0272

41/2” SO-0256-44-HC SO-0256-44-CZ SO-G-0274

5” SO-0256-50-HC SO-0256-50-CZ SO-G-0276

51/2” SO-0256-54-HC SO-0256-54-CZ SO-G-0278

6” SO-0256-60-HC SO-0256-60-CZ SO-G-0280

61/4” SO-0256-62-HC SO-0256-62-CZ SO-G-0268

SIZE CHROME PLATED LINER SEAL

61/2” SO-0256-64-CP SO-G-0268


VALVEASSY-Urethane SO-U5B-EH SO-6-V1

VALVEASSY-UrethaneHT SO-U5B-EH-HT SO-6-V1-HT

VALVEASSY-Rubber SO-5B-EH SO-6-V1R

SEAT SO-6ADD-B4 SO-6-S4

SPRING SO-5710-115 SO-5710-115L

INSERT-Urethane SO-UDD-6AB SO-6-I

INSERT-UrethaneHT SO-UDD-6AB-HT SO-6-I-HT

INSERT-Rubber SO-DD-6AB SO-6-IR




PISTONS












TRIPLEX MUD PUMPS

GASKETS


2 FLUID END PUMP PARTS


NATIONAL 9-P-100 6¾” x 9”



41/2” SO-0255-44-HC SO-0255-44-CZ SO-G-0274

5” SO-0255-50-HC SO-0255-50-CZ SO-G-0265

51/2” SO-0255-54-HC SO-0255-54-CZ SO-G-0263

6” SO-0255-60-HC SO-0255-60-CZ SO-G-0261

61/4” SO-0255-62-HC SO-0255-62-CZ SO-G-0283

61/2” SO-0255-64-HC SO-0255-64-CZ SO-G-0283


63/4” SO-0255-66-CP SO-G-0287






SPRING SO-5710-115 SO-5710-115L







PISTONS








63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




TRIPLEX MUD PUMPS

GASKETS


NATIONAL 10-P-130 6¾” x 10”



41/2” SO-0255-44-HC SO-0255-44-CZ SO-G-0274

5” SO-0255-50-HC SO-0255-50-CZ SO-G-0265

51/2” SO-0255-54-HC SO-0255-54-CZ SO-G-0263

6” SO-0255-60-HC SO-0255-60-CZ SO-G-0261

61/4” SO-0255-62-HC SO-0255-62-CZ SO-G-0283

61/2” SO-0255-64-HC SO-0255-64-CZ SO-G-0238


63/4” SO-0255-66-CP SO-G-0287






SPRING SO-5710-115 SO-5710-115L







PISTONS








63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




TRIPLEX MUD PUMPS

GASKETS




NATIONAL 12-P-160 7¼” x 12”



4” SO-0259-40-HC SO-0259-40-CZ SO-G-0265

41/2” SO-0259-44-HC SO-0259-44-CZ SO-G-0265

5” SO-0259-50-HC SO-0259-50-CZ SO-G-0265

51/2” SO-0259-54-HC SO-0259-54-CZ SO-G-0263

6” SO-0259-60-HC SO-0259-60-CZ SO-G-0261

61/4” SO-0259-62-HC SO-0259-62-CZ SO-G-0283

61/2” SO-0259-64-HC SO-0259-64-CZ SO-G-0284

63/4” SO-0259-66-HC SO-0259-66-CZ SO-G-0287

7” SO-0259-70-HC SO-0259-70-CZ SO-G-0285

71/4” SO-0259-72-HC SO-0259-72-CZ SO-G-0286

71/2” SO-0259-74-HC SO-0259-74-CZ –


VALVEASSY-Urethane SO-U5C-EEF SO-7-V1

VALVEASSY-UrethaneHT SO-U5C-EEF-HT SO-7-V1-HT

VALVEASSY-Rubber SO-5C-EEF SO-7-V1R


SPRING SO-5710-115 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –

7” 11/2”&15/8” SO-70-HL-14/15 SO-70-HL SO-70-U SO-70-3 SO-70-3-HT






TRIPLEX MUD PUMPS

GASKETS

VALVE CAP (HT) SO-G-0711 SO-G-0711-HT CYLINDER HEAD (HT) –

NATIONAL 14-P-220 9” x 14”



41/2” SO-1250-44-HC SO-1250-44-CZ -

5” SO-1250-50-HC SO-1250-50-CZ SO-G-0264

51/2” SO-1250-54-HC SO-1250-54-CZ SO-G-0263

6” SO-1250-60-HC SO-1250-60-CZ SO-G-0261

61/4” SO-1250-62-HC SO-1250-62-CZ SO-G-0283

61/2” SO-1250-64-HC SO-1250-64-CZ SO-G-0284

63/4” SO-1250-66-HC SO-1250-66-CZ SO-G-0287

7” SO-1250-70-HC SO-1250-70-CZ SO-G-0285

71/4” SO-1250-72-HC SO-1250-72-CZ SO-G-0286

71/2” SO-1250-74-HC SO-1250-74-CZ –

8” SO-1250-80-HC SO-1250-80-CZ –






SPRING SO-5710-023 SO-5710-115L







PISTONS








63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –








TRIPLEX MUD PUMPS



NATIONAL JWS-165L 4½” x 5”



3” SO-0240-30-HC SO-0240-30-CZ SO-1712064

31/2” SO-0240-34-HC SO-0240-34-CZ SO-1712064

4” SO-0240-40-HC SO-0240-40-CZ SO-1712064

41/2” SO-0240-44-HC SO-0240-44-CZ SO-1712064

VALVES, SEATS, SPRINGS & INSERTS STYLE FULL OPEN

VALVEASSY-Suction SO-2-V1

VALVEASSY-Discharge SO-2-V1

SEAT-Suction SO-2-S3

SEAT-Discharge SO-2-S4

SPRING-Suction SO-5710-003

SPRING-Discharge SO-5710-003

CAGE SO-2-C1

INSERT-Urethane SO-2-I

PISTONS

BORE HUB REPLACEABLE RUBBER PISTON REPLACEMENT SINGLE DUROMETERSIZE Ø SIZE PISTON ASSY RUBBER KIT URETHANE BONDED

3” 1” SO-30-HA-10 SO-30-HA –

31/2” 1” SO-34-HK-10 SO-34-HK –

4” 1” SO-40-HK-10 SO-40-HK SO-40-10-U

41/2” 1” SO-44-HK-10 SO-44-HK SO-44-10-U



PARTNO. 1” SO-0238 SO-16-0238 SO-24-0238 – SO-7403224

TRIPLEX MUD PUMPS

NATIONAL JWS-340 4½” x 5”



3” SO-0240-30-HC SO-0240-30-CZ SO-1712064

31/2” SO-0240-34-HC SO-0240-34-CZ SO-1712064

4” SO-0240-40-HC SO-0240-40-CZ SO-1712064

41/2” SO-0240-44-HC SO-0240-44-CZ SO-1712064






SPRING-Suction SO-5710-003

SPRING-Discharge SO-5710-003

CAGE SO-2-C1


PISTONS


3” 1” SO-30-HA-10 SO-30-HA –

31/2” 1” SO-34-HK-10 SO-34-HK –

4” 1” SO-40-HK-10 SO-40-HK SO-40-10-U

41/2” 1” SO-44-HK-10 SO-44-HK SO-44-10-U



PARTNO. 1” SO-0238 SO-16-0238 SO-24-0238 – SO-7403224

TRIPLEX MUD PUMPS



NATIONAL JWS-400 5½” x 7”



4” SO-0237-40-HC SO-0237-40-CZ SO-G-0272

41/2” SO-0237-44-HC SO-0237-44-CZ SO-G-0274

5” SO-0237-50-HC SO-0237-50-CZ SO-G-0276

51/2” SO-0237-54-HC SO-0237-54-CZ SO-G-0278






SPRING-Suction –

SPRING-Discharge –


PISTONS


4” 1” SO-40-HK-10 SO-40-HK SO-40-10-U

41/2” 1” SO-44-HK-10 SO-44-HK SO-44-10-U

5” 1” SO-50-HB-10 SO-50-HB SO-50-10-U

51/2” 1” SO-54-HB-10 SO-54-HB SO-54-10-U



PARTNO. 1” SO-2239-A SO-16-2239 SO-24-2239 SO-2239-B SO-7403224

TRIPLEX MUD PUMPS

TRIPLEX MUD PUMPS

EMSCO F-350 6¾” x 7”



4” SO-0146-40-HC SO-0146-40-CZ SO-40-0146

41/2” SO-0146-44-HC SO-0146-44-CZ SO-40-0146

5” SO-0146-50-HC SO-0146-50-CZ SO-40-0146

51/2” SO-0146-54-HC SO-0146-54-CZ SO-40-0146

6” SO-0146-60-HC SO-0146-60-CZ SO-40-0146

61/4” SO-0146-62-HC SO-0146-62-CZ SO-40-0146

61/2” SO-0146-64-HC SO-0146-64-CZ SO-40-0146

63/4” SO-0146-66-HC SO-0146-66-CZ SO-40-0146






SPRING SO-5710-101 SO-5710-111







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PARTNO. 11/2” SO-0146 SO-16-0146 SO-24-0146 – SO-7403364

GASKETS

VALVE CAP (HT) SO-G-0733 – CYLINDER HEAD (HT) SO-S-40-0146 –



TRIPLEX MUD PUMPS

EMSCO F-500 6¾” x 7½”



4” SO-0146-40-HC SO-0146-40-CZ SO-40-0146

41/2” SO-0146-44-HC SO-0146-44-CZ SO-40-0146

5” SO-0146-50-HC SO-0146-50-CZ SO-40-0146

51/2” SO-0146-54-HC SO-0146-54-CZ SO-40-0146

6” SO-0146-60-HC SO-0146-60-CZ SO-40-0146

61/4” SO-0146-62-HC SO-0146-62-CZ SO-40-0146

61/2” SO-0146-64-HC SO-0146-64-CZ SO-40-0146

63/4” SO-0146-66-HC SO-0146-66-CZ SO-40-0146






SPRING SO-5710-101 SO-5710-111







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PARTNO. 11/2” SO-0146 SO-16-0146 SO-24-0146 – SO-7403364

GASKETS


TRIPLEX MUD PUMPS

EMSCO F-650 6¾” x 8”



4” SO-0146-40-HC SO-0146-40-CZ SO-40-0146

41/2” SO-0146-44-HC SO-0146-44-CZ SO-40-0146

5” SO-0146-50-HC SO-0146-50-CZ SO-40-0146

51/2” SO-0146-54-HC SO-0146-54-CZ SO-40-0146

6” SO-0146-60-HC SO-0146-60-CZ SO-40-0146

61/4” SO-0146-62-HC SO-0146-62-CZ SO-40-0146

61/2” SO-0146-64-HC SO-0146-64-CZ SO-40-0146

63/4” SO-0146-66-HC SO-0146-66-CZ SO-40-0146






SPRING SO-5710-101 SO-5710-111







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PARTNO. 11/2” SO-0151 SO-16-0151 SO-24-0146 – SO-7403364

GASKETS




EMSCO F-800 7” x 9”

PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PARTNO. 11/2” SO-0150 SO-16-0150 SO-24-0150 – SO-7403364

TRIPLEX MUD PUMPS

GASKETS




4” SO-0148-40-HC SO-0148-40-CZ SO-40-0148

41/2” SO-0148-44-HC SO-0148-44-CZ SO-40-0148

5” SO-0148-50-HC SO-0148-50-CZ SO-40-0148

51/2” SO-0148-54-HC SO-0148-54-CZ SO-40-0148

6” SO-0148-60-HC SO-0148-60-CZ SO-40-0148

61/4” SO-0148-62-HC SO-0148-62-CZ SO-40-0148

61/2” SO-0148-64-HC SO-0148-64-CZ SO-40-0148


63/4” SO-0148-66-CP SO-40-0148






SPRING SO-5710-101 SO-5710-111







EMSCO F-1000 7” x 10”

PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PARTNO. 11/2” SO-0148 SO-16-0148 SO-24-0148 – SO-7403364

TRIPLEX MUD PUMPS

GASKETS




4” SO-0148-40-HC SO-0148-40-CZ SO-40-0148

41/2” SO-0148-44-HC SO-0148-44-CZ SO-40-0148

5” SO-0148-50-HC SO-0148-50-CZ SO-40-0148

51/2” SO-0148-54-HC SO-0148-54-CZ SO-40-0148

6” SO-0148-60-HC SO-0148-60-CZ SO-40-0148

61/4” SO-0148-62-HC SO-0148-62-CZ SO-40-0148

61/2” SO-0148-64-HC SO-0148-64-CZ SO-40-0148


63/4” SO-0148-66-CP SO-40-0148






SPRING SO-5710-101 SO-5710-111









TRIPLEX MUD PUMPS

EMSCO FA-1300 TYPE II 7½” x 12”



4” SO-1146-40-HC SO-1146-40-CZ SO-RE-1146

41/2” SO-1146-44-HC SO-1146-44-CZ SO-RE-1146

5” SO-1146-50-HC SO-1146-50-CZ SO-RE-1146

51/2” SO-1146-54-HC SO-1146-54-CZ SO-RE-1146

6” SO-1146-60-HC SO-1146-60-CZ SO-RE-1146

61/4” SO-1146-62-HC SO-1146-62-CZ SO-RE-1146

61/2” SO-1146-64-HC SO-1146-64-CZ SO-RE-1146

63/4” SO-1146-66-HC SO-1146-66-CZ SO-RE-1146

7” SO-1146-70-HC SO-1146-70-CZ SO-RE-1146






SPRING SO-5710-112 SO-5710-113







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. 11/2” SO-0145 SO-16-0145 SO-24-0145 – SO-7403364

GASKETS


TRIPLEX MUD PUMPS

EMSCO FA-1600 TYPE II 7½” x 12”



4” SO-1146-40-HC SO-1146-40-CZ SO-RE-1146

41/2” SO-1146-44-HC SO-1146-44-CZ SO-RE-1146

5” SO-1146-50-HC SO-1146-50-CZ SO-RE-1146

51/2” SO-1146-54-HC SO-1146-54-CZ SO-RE-1146

6” SO-1146-60-HC SO-1146-60-CZ SO-RE-1146

61/4” SO-1146-62-HC SO-1146-62-CZ SO-RE-1146

61/2” SO-1146-64-HC SO-1146-64-CZ SO-RE-1146

63/4” SO-1146-66-HC SO-1146-66-CZ SO-RE-1146

7” SO-1146-70-HC SO-1146-70-CZ SO-RE-1146






SPRING SO-5710-112 SO-5710-113







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. 11/2” SO-0145 SO-16-0145 SO-24-0145 – SO-7403364

GASKETS

VALVE CAP (HT) SO-G-0741 – CYLINDER HEAD (HT) SO-G-0801 –



TRIPLEX MUD PUMPS

EMSCO FB-1300 7” x 12”



4” SO-2145-40-HC SO-2145-40-CZ SO-RE-2145

41/2” SO-2145-44-HC SO-2145-44-CZ SO-RE-2145

5” SO-2145-50-HC SO-2145-50-CZ SO-RE-2145

51/2” SO-2145-54-HC SO-2145-54-CZ SO-RE-2145

6” SO-2145-60-HC SO-2145-60-CZ SO-RE-2145

61/4” SO-2145-62-HC SO-2145-62-CZ SO-RE-2145

61/2” SO-2145-64-HC SO-2145-64-CZ SO-RE-2145

63/4” SO-2145-66-HC SO-2145-66-CZ SO-RE-2145

7” SO-2145-70-HC SO-2145-70-CZ SO-RE-2145






SPRING SO-5710-112 SO-5710-113







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


PISTON RODS, EXTENSION RODS & ACCESSORIES *1piecerod


PARTNO. 11/2” SO-2145* SO-16-0145 SO-24-0145 – SO-7403364

GASKETS


TRIPLEX MUD PUMPS

EMSCO FB-1600 7” x 12”



4” SO-2145-40-HC SO-2145-40-CZ SO-RE-2145

41/2” SO-2145-44-HC SO-2145-44-CZ SO-RE-2145

5” SO-2145-50-HC SO-2145-50-CZ SO-RE-2145

51/2” SO-2145-54-HC SO-2145-54-CZ SO-RE-2145

6” SO-2145-60-HC SO-2145-60-CZ SO-RE-2145

61/4” SO-2145-62-HC SO-2145-62-CZ SO-RE-2145

61/2” SO-2145-64-HC SO-2145-64-CZ SO-RE-2145

63/4” SO-2145-66-HC SO-2145-66-CZ SO-RE-2145

7” SO-2145-70-HC SO-2145-70-CZ SO-RE-2145






SPRING SO-5710-112 SO-5710-113







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. 11/2” SO-2145* SO-16-0145 SO-24-0145 – SO-7403364

GASKETS




TRIPLEX MUD PUMPS

GARDNER DENVER PJ8A, B | PAH-BFB 5” x 8”



3” SO-0189-30-HC SO-0189-30-CZ SO-G-0266

31/2” SO-0189-34-HC SO-0189-34-CZ SO-G-0266

4” SO-0189-40-HC SO-0189-40-CZ SO-G-0266


41/2” SO-0189-44-CP SO-G-0266

5” SO-0189-50-CP SO-G-0266






SPRING SO-5710-024 SO-5710-078







PISTONS


3” 11/2”&15/8” SO-30-HA-14/15 SO-30-HA SO-30-U – –

31/2” 11/2”&15/8” SO-34-HK-14/15 SO-34-HK SO-34-U – –




GASKETS



TYPE DIAMETER PISTON ROD EXTENSION ROD ROD CLAMP SUB ROD PISTON ROD NUT

CLAMP 11/2” SO-0193 SO-16-0192 SO-24-0191 – SO-7403364

THREAD 11/2” SO-0193-B* – – – SO-7403364

TRIPLEX MUD PUMPS

GARDNER DENVER TEE-BFC (PE-5) | TEE-BFB 4” x 5”



3” SO-1190-30-HC SO-1190-30-CZ SO-G-0174

31/2” SO-1190-34-HC SO-1190-34-CZ SO-G-0174

4” SO-1190-40-HC SO-1190-40-CZ SO-G-0174






SPRING SO-5710-024 SO-5710-078







PISTONS


3” 1” SO-30-HA-10 SO-30-HA –

31/2” 1” SO-34-HK-10 SO-34-HK –

4” 1” SO-40-HK-10 SO-40-HK SO-40-10-U



CLAMP 1” SO-0199 – – – SO-7403224

THREAD 1” SO-0204 – – – SO-7403224

GASKETS




TRIPLEX MUD PUMPS

GARDNER DENVER PY-7A, C, E & G | PY-7 6¼” x 7”



4” SO-1192-40-HC SO-1192-40-CZ SO-G-0692

41/2” SO-1192-44-HC SO-1192-44-CZ SO-G-0692

5” SO-1192-50-HC SO-1192-50-CZ SO-G-0692

51/2” SO-1192-54-HC SO-1192-54-CZ SO-G-0692

6” SO-1192-60-HC SO-1192-60-CZ SO-G-0692

61/4” SO-1192-62-HC SO-1192-62-CZ SO-G-0692

61/2” SO-1192-64-HC SO-1192-64-CZ SO-G-0692

63/4” SO-1192-66-HC SO-1192-66-CZ SO-G-0692

7” SO-1192-70-HC SO-1192-70-CZ SO-G-0692






SPRING SO-5710-111 SO-5710-111







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




CLAMP 11/2” SO-0192 SO-16-0205 SO-24-0191 – SO-7403364

THREAD 11/2” SO-0196 SO-16-0196 – – SO-7403364

TRIPLEX MUD PUMPS

GARDNER DENVER PZ-GA & GB | PZ-7 7” x 7”


SIZE BI-METAL CERAMIC ZIRCONIA LINER SEAL

4” SO-1192-40-HC SO-1192-40-CZ SO-G-0692

41/2” SO-1192-44-HC SO-1192-44-CZ SO-G-0692

5” SO-1192-50-HC SO-1192-50-CZ SO-G-0692

51/2” SO-1192-54-HC SO-1192-54-CZ SO-G-0692

6” SO-1192-60-HC SO-1192-60-CZ SO-G-0692

61/4” SO-1192-62-HC SO-1192-62-CZ SO-G-0692

61/2” SO-1192-64-HC SO-1192-64-CZ SO-G-0692

63/4” SO-1192-66-HC SO-1192-66-CZ SO-G-0692

7” SO-1192-70-HC SO-1192-70-CZ SO-G-0692






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




CLAMP 11/2” SO-0205 SO-16-0205 SO-24-0191 – SO-7403364

THREAD 11/2” SO-0196 SO-16-0196 – – SO-7403364



TRIPLEX MUD PUMPS

GARDNER DENVER PZ-H-E, VE | PZ-8 7” x 8”



4” SO-1191-40-HC SO-1191-40-CZ SO-G-0692

41/2” SO-1191-44-HC SO-1191-44-CZ SO-G-0692

5” SO-1191-50-HC SO-1191-50-CZ SO-G-0692

51/2” SO-1191-54-HC SO-1191-54-CZ SO-G-0692

6” SO-1191-60-HC SO-1191-60-CZ SO-G-0692

61/4” SO-1191-62-HC SO-1191-62-CZ SO-G-0692

61/2” SO-1191-64-HC SO-1191-64-CZ SO-G-0692

63/4” SO-1191-66-HC SO-1191-66-CZ SO-G-0692

7” SO-1191-70-HC SO-1191-70-CZ SO-G-0692






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




CLAMP 11/2” SO-0191 SO-16-0192 SO-24-0191 – SO-7403364

THREAD 11/2” SO-0202 SO-16-0196 – – SO-7403364

TRIPLEX MUD PUMPS

GARDNER DENVER PZ-GA & GB | PZ-9 7” x 9”



4” SO-1191-40-HC SO-1191-40-CZ SO-G-0692

41/2” SO-1191-44-HC SO-1191-44-CZ SO-G-0692

5” SO-1191-50-HC SO-1191-50-CZ SO-G-0692

51/2” SO-1191-54-HC SO-1191-54-CZ SO-G-0692

6” SO-1191-60-HC SO-1191-60-CZ SO-G-0692

61/4” SO-1191-62-HC SO-1191-62-CZ SO-G-0692

61/2” SO-1191-64-HC SO-1191-64-CZ SO-G-0692

63/4” SO-1191-66-HC SO-1191-66-CZ SO-G-0692

7” SO-1191-70-HC SO-1191-70-CZ SO-G-0692






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




CLAMP 11/2” SO-0191 SO-16-0191 SO-24-0191 – SO-7403364

THREAD 11/2” SO-0202 SO-16-0201 – – SO-7403364



TRIPLEX MUD PUMPS

GARDNER DENVER PZL | PZ-10 7” x 10”



4” SO-0197-40-HC SO-0197-40-CZ SO-G-0692

41/2” SO-0197-44-HC SO-0197-44-CZ SO-G-0692

5” SO-0197-50-HC SO-0197-50-CZ SO-G-0692

51/2” SO-0197-54-HC SO-0197-54-CZ SO-G-0692

6” SO-0197-60-HC SO-0197-60-CZ SO-G-0692

61/4” SO-0197-62-HC SO-0197-62-CZ SO-G-0692

61/2” SO-0197-64-HC SO-0197-64-CZ SO-G-0692

63/4” SO-0197-66-HC SO-0197-66-CZ SO-G-0692

7” SO-0197-70-HC SO-0197-70-CZ SO-G-0692






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS

VALVE CAP (HT) SO-G-0780 SO-G-0780-HT CYLINDER HEAD (HT) SO-G-0780 SO-G-0780-HT



CLAMP 11/2” SO-0200 SO-16-0200 SO-24-0200 – SO-7403364

THREAD 11/2” SO-0201 SO-16-0201 – – SO-7403364

TRIPLEX MUD PUMPS

GARDNER DENVER PZL | PZ-11 7” x 11”



4” SO-0197-40-HC SO-0197-40-CZ SO-G-0692

41/2” SO-0197-44-HC SO-0197-44-CZ SO-G-0692

5” SO-0197-50-HC SO-0197-50-CZ SO-G-0692

51/2” SO-0197-54-HC SO-0197-54-CZ SO-G-0692

6” SO-0197-60-HC SO-0197-60-CZ SO-G-0692

61/4” SO-0197-62-HC SO-0197-62-CZ SO-G-0692

61/2” SO-0197-64-HC SO-0197-64-CZ SO-G-0692

63/4” SO-0197-66-HC SO-0197-66-CZ SO-G-0692

7” SO-0197-70-HC SO-0197-70-CZ SO-G-0692






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




CLAMP 11/2” SO-0200 SO-16-0200 SO-24-0200 – SO-7403364

THREAD 11/2” SO-0201 SO-16-0201 – – SO-7403364

GASKETS

VALVE CAP (HT) SO-G-0780 SO-G-0780-HT CYLINDER HEAD (HT) SO-G-0780 SO-G-0780-HT



TRIPLEX MUD PUMPS

OILWELL A-350-PT 7” x 8”



4” SO-0287-40-HC SO-0287-40-CZ SO-G-0753

41/2” SO-0287-44-HC SO-0287-44-CZ SO-G-0754

5” SO-0287-50-HC SO-0287-50-CZ SO-G-0742

51/2” SO-0287-54-HC SO-0287-54-CZ SO-G-0743

6” SO-0287-60-HC SO-0287-60-CZ SO-G-0745

61/4” SO-0287-62-HC SO-0287-62-CZ SO-G-0770

61/2” SO-0287-64-HC SO-0287-64-CZ SO-G-0746

63/4” SO-0287-66-HC SO-0287-66-CZ SO-G-0755

7” SO-0287-70-HC SO-0287-70-CZ SO-G-0756






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PISTON ROD EXTENSION ROD ROD CLAMP CONNECTING ROD SUB ROD PISTON ROD NUT

PARTNO. SO-0283-C SO-16-0282 SO-24-0284 SO-0283-D SO-0283-B SO-7403364

GASKETS

VALVE CAP (HT) SO-G-0732 – CYLINDER HEAD (HT)

TRIPLEX MUD PUMPS




4” SO-0287-40-HC SO-0287-40-CZ SO-G-0753

41/2” SO-0287-44-HC SO-0287-44-CZ SO-G-0754

5” SO-0287-50-HC SO-0287-50-CZ SO-G-0742

51/2” SO-0287-54-HC SO-0287-54-CZ SO-G-0743

6” SO-0287-60-HC SO-0287-60-CZ SO-G-0745

61/4” SO-0287-62-HC SO-0287-62-CZ SO-G-0770

61/2” SO-0287-64-HC SO-0287-64-CZ SO-G-0746

63/4” SO-0287-66-HC SO-0287-66-CZ SO-G-0755

7” SO-0287-70-HC SO-0287-70-CZ SO-G-0756






SPRING SO-5710-110 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. SO-0283-C SO-16-0283 SO-24-0284 SO-0283-D SO-0283-A SO-7403364

GASKETS




TRIPLEX MUD PUMPS




4” SO-0287-40-HC SO-0287-40-CZ SO-G-0753

41/2” SO-0287-44-HC SO-0287-44-CZ SO-G-0754

5” SO-0287-50-HC SO-0287-50-CZ SO-G-0742

51/2” SO-0287-54-HC SO-0287-54-CZ SO-G-0743

6” SO-0287-60-HC SO-0287-60-CZ SO-G-0745

61/4” SO-0287-62-HC SO-0287-62-CZ SO-G-0770

61/2” SO-0287-64-HC SO-0287-64-CZ SO-G-0746

63/4” SO-0287-66-HC SO-0287-66-CZ SO-G-0755

7” SO-0287-70-HC SO-0287-70-CZ SO-G-0756






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. SO-0283-C SO-16-0282 SO-24-0284 SO-0283-D SO-0283-B SO-7403364

GASKETS


TRIPLEX MUD PUMPS

OILWELL A-850-PT 7½” x 9”



4” SO-0289-40-HC SO-0289-40-CZ SO-G-0753

41/2” SO-0289-44-HC SO-0289-44-CZ SO-G-0754

5” SO-0289-50-HC SO-0289-50-CZ SO-G-0742

51/2” SO-0289-54-HC SO-0289-54-CZ SO-G-0743

6” SO-0289-60-HC SO-0289-60-CZ SO-G-0745

61/4” SO-0289-62-HC SO-0289-62-CZ SO-G-0770

61/2” SO-0289-64-HC SO-0289-64-CZ SO-G-0746

63/4” SO-0289-66-HC SO-0289-66-CZ SO-G-0755

7” SO-0289-70-HC SO-0289-70-CZ SO-G-0756

71/4” SO-0289-72-HC SO-0289-72-CZ SO-G-0757

71/2” SO-0289-74-HC SO-0289-74-CZ SO-G-0758






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –







GASKETS




TRIPLEX MUD PUMPS




4” SO-0289-40-HC SO-0289-40-CZ SO-G-0753

41/2” SO-0289-44-HC SO-0289-44-CZ SO-G-0754

5” SO-0289-50-HC SO-0289-50-CZ SO-G-0742

51/2” SO-0289-54-HC SO-0289-54-CZ SO-G-0743

6” SO-0289-60-HC SO-0289-60-CZ SO-G-0745

61/4” SO-0289-62-HC SO-0289-62-CZ SO-G-0770

61/2” SO-0289-64-HC SO-0289-64-CZ SO-G-0746

63/4” SO-0289-66-HC SO-0289-66-CZ SO-G-0755

7” SO-0289-70-HC SO-0289-70-CZ SO-G-0756

71/4” SO-0289-72-HC SO-0289-72-CZ SO-G-0757

71/2” SO-0289-74-HC SO-0289-74-CZ SO-G-0758






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –







GASKETS


TRIPLEX MUD PUMPS




4” SO-0284-40-HC SO-0284-40-CZ SO-G-0753

41/2” SO-0284-44-HC SO-0284-44-CZ SO-G-0754

5” SO-0284-50-HC SO-0284-50-CZ SO-G-0742

51/2” SO-0284-54-HC SO-0284-54-CZ SO-G-0743

6” SO-0284-60-HC SO-0284-60-CZ SO-G-0745

61/4” SO-0284-62-HC SO-0284-62-CZ SO-G-0770

61/2” SO-0284-64-HC SO-0284-64-CZ SO-G-0746

63/4” SO-0284-66-HC SO-0284-66-CZ SO-G-0755

7” SO-0284-70-HC SO-0284-70-CZ SO-G-0756

71/4” SO-0284-72-HC SO-0284-72-CZ SO-G-0757

71/2” SO-0284-74-HC SO-0284-74-CZ SO-G-0758






SPRING SO-5710-110 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –







GASKETS




TRIPLEX MUD PUMPS




4” SO-0284-40-HC SO-0284-40-CZ SO-G-0753

41/2” SO-0284-44-HC SO-0284-44-CZ SO-G-0754

5” SO-0284-50-HC SO-0284-50-CZ SO-G-0742

51/2” SO-0284-54-HC SO-0284-54-CZ SO-G-0743

6” SO-0284-60-HC SO-0284-60-CZ SO-G-0745

61/4” SO-0284-62-HC SO-0284-62-CZ SO-G-0770

61/2” SO-0284-64-HC SO-0284-64-CZ SO-G-0746

63/4” SO-0284-66-HC SO-0284-66-CZ SO-G-0755

7” SO-0284-70-HC SO-0284-70-CZ SO-G-0756

71/4” SO-0284-72-HC SO-0284-72-CZ SO-G-0757

71/2” SO-0284-74-HC SO-0284-74-CZ SO-G-0758






SPRING SO-5710-110 SO-5710-110L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PISTON RODS, EXTENSION ROD & ACCESSORIES



GASKETS


TRIPLEX MUD PUMPS

IDECO T-500 7” x 8”



4” SO-0234-40-HC SO-0234-40-CZ SO-G-0783

41/2” SO-0234-44-HC SO-0234-44-CZ SO-G-0783

5” SO-0234-50-HC SO-0234-50-CZ SO-G-0783

51/2” SO-0234-54-HC SO-0234-54-CZ SO-G-0783

6” SO-0234-60-HC SO-0234-60-CZ SO-G-0783

61/4” SO-0234-62-HC SO-0234-62-CZ SO-G-0783

61/2” SO-0234-64-HC SO-0234-64-CZ SO-G-0783

63/4” SO-0234-66-HC SO-0234-66-CZ SO-G-0783

7” SO-0234-70-HC SO-0234-70-CZ SO-G-0783






SPRING SO-5710-115L SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




PARTNO. 11/2” SO-0237 SO-16-0237 SO-24-0237 – SO-7403364



TRIPLEX MUD PUMPS

IDECO T-800 7” x 9”



4” SO-0230-40-HC SO-0230-40-CZ SO-G-0783

41/2” SO-0230-44-HC SO-0230-44-CZ SO-G-0783

5” SO-0230-50-HC SO-0230-50-CZ SO-G-0783

51/2” SO-0230-54-HC SO-0230-54-CZ SO-G-0783

6” SO-0230-60-HC SO-0230-60-CZ SO-G-0783

61/4” SO-0230-62-HC SO-0230-62-CZ SO-G-0783

61/2” SO-0230-64-HC SO-0230-64-CZ SO-G-0783

63/4” SO-0230-66-HC SO-0230-66-CZ SO-G-0783

7” SO-0230-70-HC SO-0230-70-CZ SO-G-0783






SPRING SO-5710-115 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




PARTNO. 11/2” SO-0230 SO-16-0230 SO-24-0230 – SO-7403364

TRIPLEX MUD PUMPS

IDECO T-1000 7” x 10”



4” SO-0230-40-HC SO-0230-40-CZ SO-G-0783

41/2” SO-0230-44-HC SO-0230-44-CZ SO-G-0783

5” SO-0230-50-HC SO-0230-50-CZ SO-G-0783

51/2” SO-0230-54-HC SO-0230-54-CZ SO-G-0783

6” SO-0230-60-HC SO-0230-60-CZ SO-G-0783

61/4” SO-0230-62-HC SO-0230-62-CZ SO-G-0783

61/2” SO-0230-64-HC SO-0230-64-CZ SO-G-0783

63/4” SO-0230-66-HC SO-0230-66-CZ SO-G-0783

7” SO-0230-70-HC SO-0230-70-CZ SO-G-0783






SPRING SO-5710-115 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




PARTNO. 11/2” SO-0231 SO-16-0231 SO-24-0231 – SO-7403364



TRIPLEX MUD PUMPS

IDECO T-1300 7½” x 12”



4” SO-0233-40-HC SO-0233-40-CZ SO-G-0782

41/2” SO-0233-44-HC SO-0233-44-CZ SO-G-0782

5” SO-0233-50-HC SO-0233-50-CZ SO-G-0782

51/2” SO-0233-54-HC SO-0233-54-CZ SO-G-0782

6” SO-0233-60-HC SO-0233-60-CZ SO-G-0782

61/4” SO-0233-62-HC SO-0233-62-CZ SO-G-0782

61/2” SO-0233-64-HC SO-0233-64-CZ SO-G-0782

63/4” SO-0233-66-HC SO-0233-66-CZ SO-G-0782

7” SO-0233-70-HC SO-0233-70-CZ SO-G-0782






SPRING SO-5710-115 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




PARTNO. 11/2” SO-0233 SO-16-0233 SO-24-0233 – SO-7403364

TRIPLEX MUD PUMPS

IDECO T-1600 7½” x 12”



4” SO-0233-40-HC SO-0233-40-CZ SO-G-0782

41/2” SO-0233-44-HC SO-0233-44-CZ SO-G-0782

5” SO-0233-50-HC SO-0233-50-CZ SO-G-0782

51/2” SO-0233-54-HC SO-0233-54-CZ SO-G-0782

6” SO-0233-60-HC SO-0233-60-CZ SO-G-0782

61/4” SO-0233-62-HC SO-0233-62-CZ SO-G-0782

61/2” SO-0233-64-HC SO-0233-64-CZ SO-G-0782

63/4” SO-0233-66-HC SO-0233-66-CZ SO-G-0782

7” SO-0233-70-HC SO-0233-70-CZ SO-G-0782






SPRING SO-5710-115 SO-5710-115L







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




PARTNO. 11/2” SO-0233 SO-16-0233 SO-24-0233 – SO-7403364



TRIPLEX MUD PUMPS

BOMCO F-1600 7” x 12”



4” SO-2145-40-HC SO-2145-40-CZ SO-RE-2145

41/2” SO-2145-44-HC SO-2145-44-CZ SO-RE-2145

5” SO-2145-50-HC SO-2145-50-CZ SO-RE-2145

51/2” SO-2145-54-HC SO-2145-54-CZ SO-RE-2145

6” SO-2145-60-HC SO-2145-60-CZ SO-RE-2145

61/4” SO-2145-62-HC SO-2145-62-CZ SO-RE-2145

61/2” SO-2145-64-HC SO-2145-64-CZ SO-RE-2145

63/4” SO-2145-66-HC SO-2145-66-CZ SO-RE-2145

7” SO-2145-70-HC SO-2145-70-CZ SO-RE-2145






SPRING SO-5710-112 SO-5710-113







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




PARTNO. 11/2” SO-2145* SO-16-0145 SO-24-0145 – SO-7403364

HONG HUA F-1000 7” x 10”

PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –



PARTNO. 11/2” SO-0148 SO-16-0148 SO-24-0148 – SO-7403364

TRIPLEX MUD PUMPS

GASKETS




4” SO-0148-40-HC SO-0148-40-CZ SO-40-0148

41/2” SO-0148-44-HC SO-0148-44-CZ SO-40-0148

5” SO-0148-50-HC SO-0148-50-CZ SO-40-0148

51/2” SO-0148-54-HC SO-0148-54-CZ SO-40-0148

6” SO-0148-60-HC SO-0148-60-CZ SO-40-0148

61/4” SO-0148-62-HC SO-0148-62-CZ SO-40-0148

61/2” SO-0148-64-HC SO-0148-64-CZ SO-40-0148


63/4” SO-0148-66-CP SO-40-0148






SPRING SO-5710-101 SO-5710-111









TRIPLEX MUD PUMPS

HONG HUA F-1600 7½” x 12”



4” SO-2145-40-HC SO-2145-40-CZ SO-RE-2145

41/2” SO-2145-44-HC SO-2145-44-CZ SO-RE-2145

5” SO-2145-50-HC SO-2145-50-CZ SO-RE-2145

51/2” SO-2145-54-HC SO-2145-54-CZ SO-RE-2145

6” SO-2145-60-HC SO-2145-60-CZ SO-RE-2145

61/4” SO-2145-62-HC SO-2145-62-CZ SO-RE-2145

61/2” SO-2145-64-HC SO-2145-64-CZ SO-RE-2145

63/4” SO-2145-66-HC SO-2145-66-CZ SO-RE-2145

7” SO-2145-70-HC SO-2145-70-CZ SO-RE-2145






SPRING SO-5710-112 SO-5710-113







PISTONS









63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. 11/2” SO-2145* SO-16-0145 SO-24-0145 – SO-7403364

GASKETS

VALVE CAP (HT) SO-G-0741 – CYLINDER HEAD (HT) SO-G-0801

TRIPLEX MUD PUMPS

WIRTH TPK-1300 7” x 10”



41/2” SO-0465-44-HC SO-0465-44-CZ SO-G-0179

5” SO-0465-50-HC SO-0465-50-CZ SO-G-0179

51/2” SO-0465-54-HC SO-0465-54-CZ SO-G-0179

6” SO-0465-60-HC SO-0465-60-CZ SO-G-0179

61/4” SO-0465-62-HC SO-0465-62-CZ SO-G-0179

61/2” SO-0465-64-HC SO-0465-64-CZ SO-G-0179

63/4” SO-0465-66-HC SO-0465-66-CZ SO-G-0179

7” SO-0465-70-HC SO-0465-70-CZ SO-G-0179


VALVEASSY-Urethane SO-7-V1

VALVEASSY-UrethaneHT SO-7-V1-HT

VALVEASSY-Rubber SO-7-V1R

SEAT SO-7-S1

SPRING SO-5710-110


INSERT-UrethaneHT SO-7-I-HT

INSERT-Rubber SO-7-IR


PULLERASSEMBLY* SO-1700

PULLERHEAD SO-D-7

PISTONS








63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. 11/2” SO-0465 – – – SO-7403364



TRIPLEX MUD PUMPS

WIRTH TPK-1600 7” x 12”



41/2” SO-0465-44-HC SO-0465-44-CZ SO-G-0179

5” SO-0465-50-HC SO-0465-50-CZ SO-G-0179

51/2” SO-0465-54-HC SO-0465-54-CZ SO-G-0179

6” SO-0465-60-HC SO-0465-60-CZ SO-G-0179

61/4” SO-0465-62-HC SO-0465-62-CZ SO-G-0179

61/2” SO-0465-64-HC SO-0465-64-CZ SO-G-0179

63/4” SO-0465-66-HC SO-0465-66-CZ SO-G-0179

7” SO-0465-70-HC SO-0465-70-CZ SO-G-0179


VALVEASSY-Urethane SO-7-V1

VALVEASSY-UrethaneHT SO-7-V1-HT

VALVEASSY-Rubber SO-7-V1R

SEAT SO-7-S1

SPRING SO-5710-110


INSERT-UrethaneHT SO-7-I-HT

INSERT-Rubber SO-7-IR




PISTONS








63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –




PARTNO. 11/2” SO-0466 – – – SO-7403364

TRIPLEX MUD PUMPS

OPI 700-HDL 7” x 8”



4” SO-0481-40-HC SO-0481-40-CZ SO-G-0753

41/2” SO-0481-44-HC SO-0481-44-CZ SO-G-0754

5” SO-0481-50-HC SO-0481-50-CZ SO-G-0742

51/2” SO-0481-54-HC SO-0481-54-CZ SO-G-0743

6” SO-0481-60-HC SO-0481-60-CZ SO-G-0745

61/2” SO-0481-64-HC SO-0481-64-CZ SO-G-0746

63/4” SO-0481-66-HC SO-0481-66-CZ SO-G-0755

7” SO-0481-70-HC SO-0481-70-CZ SO-G-0756






SPRING SO-5710-115 SO-5710-115







PISTONS








63/4” 11/2”&15/8” SO-66-HL-14/15 SO-66-HL – – –


GASKETS




CLAMPTYPE 11/2” SO-0482 SO-16-0481 SO-24-0482 SO-0482-B SO-7403364

THREADTYPE 11/2” SO-0481 SO-16-0481 – SO-0481-B SO-7403364


TRIPLEX MUD PUMPS


15

12

16

13

11

619 18

177

20

19

18

11

15 3 12

16

17

13

22

3

29

32

3331

10

6

5343528262723

27

24

25

9

8

21

30

42

120

3

NATIONAL 7-P-50

TRIPLEX MUD PUMPS

NATIONAL 7-P-50

TRIPLEX MUD PUMPS


ITEM PART NO. DESCRIPTION QTY PER PUMP

1 SO-1294250 MODULE,STUDDEDFLUIDENDDISCHARGE(INCLUDESITEMS#2–7) 3

2 SO-1294251 DISCHARGEMODULE,ONLY 3

3 SO-6300160 NUT,POWERFRAMESTUD 24

4 SO-2408042 STUD,POWERFRAME 24

5 SO-2408043 STUD,LINERBUSHING 18

7 SO-2408041 STUD,DISCHARGETOSUCTIONMODULE 18

8 SO-1294156 SUCTIONMODULE,ONLY 3

10 SO-1294165 BUSHING,LINER 3

11 SO-1290174 RETAINER,SEAL 6

12 SO-1294172 COVER,VALVE 6

13 SO-1290178 SCREW,WEDGELOCKING 6

15 SO-1290315 WASHER,LOCKINGWEDGESCREW 6

16 SO-1290181 SPRING,WEDGEASSEMBLY 6

17 SO-1290376 WEDGECOMPLETE,LOCKING 6

18 SO-1540126 GASKET,VALVECOVER 6

19 SO-1292140 HOLDER,VALVEGUIDEINSERT 6

20 SO-1292141 INSERT,VALVEGUIDE 6

21 SO-6511416 PIN,7/8”X2”DOWELL 6

22 SO-1294160 PLATE,WEAR 3

23 SO-1294170 CONNECTOR,DISCHARGE 2

24 SO-700030510 SCREW,1/2”X11/2”HEXHEAD 16

25 SO-7602050 WASHER,SPRINGLOCK 16

26 SO-1294171 ADAPTER,DISCHARGECONNECTOR 2

27 SO-2410031348 PACKING,DISCHARGECONNECTOR 2

28 SO-2410031427 PACKING,DISCHARGEADAPTER 4

29 SO-1294166 CLAMPCOMPLETE,LINER 3

30 SO-700040310 SCREW5/8”X31/2”HEXHEAD 6

31 SO-6309100 NUT,5/8”LOCKTYPE 6

32 SO-1294169 PIN,LINERCLAMP 3

33 SO-1294168 CONNECTOR,LINERCLAMP 3

34 SO-2402560 STUD,11/4”X61/4” 18

35 SO-6300200 NUT,DISCHARGETOSUCTIONMODULESTUD,11/4”HEAVYHEX 18

36 SO-1294192 SEAL,MODULE&WEARPLATE(NOTSHOWNINDRAWING) 6

37 SO-1540142 SEAL,SUCTIONMANIFOLD(NOTSHOWNINDRAWING) 3


19

20

12

17

21

22

22

16

20 19 17

9

21

22

22

10

18

27

3

42

34

35

37

3836

6

26

25

2324

15

5394033313128

33

29

30

14

23

24

258

18

16

13

7

NATIONAL 8-P-80

TRIPLEX MUD PUMPS

NATIONAL 8-P-80

TRIPLEX MUD PUMPS







5 SO-6300120 NUT,LINERBUSHINGSTUD 18


7 SO-6300241 NUT,DISCHARGETOSUCTIONMODULESTUD 18

8 SO-2408034 STUD,DISCHARGEMODULETOSUCTIONMODULE 18

9 SO-6300220 NUT,THREADEDRINGSTUD,13/8”HEAVYHEX 36

10 SO-2408019 STUD,THREADEDRING 36

11 SO-1290338 MODULE,STUDDEDFLUIDENDSUCTION(INCLUDESITEMS#12–14) 3

12 SO-6300220 NUT,THREADEDRINGSTUD,13/8”HEAVYHEX(SAMEASITEM#9) 36

13 SO-2408019 STUD,THREADEDRING(SAMEASITEM#10) 36




17 SO-1290307 CAP,VALVECOVER(THREADED) 6

18 SO-1290178 SCREW,WEDGEADJUSTING 6

19 SO-6300160 NUT,WEDGEADJUSTINGSCREW 6

20 SO-1290315 WASHER,WEDGEADJUSTINGSCREW 6

21 SO-1290308 RING,THREADED 6

22 SO-1290376 ASSEMBLY,WEDGE 6


24 SO-1292140 RETAINER,VALVEGUIDEBUSHING 6

25 SO-1292141 BUSHING,VALVEGUIDE 6

26 SO-6511416 PIN,7/8”X2”DOWELL 6



29 SO-700030511 CAPSCREW,DISCHARGECONNECTOR,1/2”X11/2”HEXHEAD 16

30 SO-7619050 WASHER,DISCHARGECONNECTORSCREW 16


32 SO-2410031348 PACKING,DISCHARGECONNECTORTODISCHARGEADAPTER 2

33 SO-2410031427 PACKING,DISCHARGECONNECTOR&DISCHARGEADAPTER 4

34 SO-1291166 CLAMP,LINER 3

35 SO-700040311 CAPSCREW,LINERCLAMP 6

36 SO-6309100 NUT,LINERCAPSCREW 6

37 SO-1291169 PIN,CONNECTOR 3


39 SO-2402560 STUD,DISCHARGESPACER 16

40 SO-6300200 NUT,DISCHARGESPACERSTUD 16



43 SO-1291286 SPACER,STUDDEDDISCHARGE(NOTSHOWNINDRAWING) 2

44 SO-1290345 SEAL,SPACERTOFLUIDEND(NOTSHOWNINDRAWING) 2


19

20

12

17

21

22

228

25

25

1426

30

29

33

28 31 31 33 40 39 536

38

37

34

35

3

27

18

10

22

22

21

9

171920

42

6

15

2324

24

23

16

18

16

13

7

NATIONAL 9-P-100

TRIPLEX MUD PUMPS

NATIONAL 9-P-100

TRIPLEX MUD PUMPS




























26 SO-6511416 PIN,7/8”X2”DOWELL 6




















19

20

13

17

21

22

228

25

25

2324

24

23

16

18

16

14

7

12

30

29

33

28 31 31 33 40 39 5 38

37

34

3

27

18

10

22

22

21

9

171920

35

42

6

36

15

26

NATIONAL 10-P-130

TRIPLEX MUD PUMPS

NATIONAL 10-P-130

TRIPLEX MUD PUMPS




























26 SO-6511416 PIN,7/8”X2”DOWELL 6




















19

20

13

17

21

22

228

25

24

23

16

20 19 17

9

21

22

22

10

18

274

35

2

3

34

37

3836

53940333131

26

28

33

29

30

12

6

15

18

16

14

724 23

25

NATIONAL 12-P-160

TRIPLEX MUD PUMPS

NATIONAL 12-P-160

TRIPLEX MUD PUMPS




























26 SO-6511416 PIN,7/8”X2”DOWELL 6




















19

18

17

16

15

3

2 1 6 7

20

9

21 8 22 11 12 10

4 13 14 5

EMSCO F-350 | F-500 | F-650

TRIPLEX MUD PUMPS

EMSCO F-350 | F-500 | F-650

TRIPLEX MUD PUMPS



1 SO-6318-0151-00 MODULE,STUDDEDFLUIDEND(INCLUDESITEMS#2–7) 3

2 SO-7507-2207-00 STUD,POWERFRAME 18

3 SO-7601-0630-17 NUT,POWERFRAMESTUD 18

4 SO-7507-3402-00 STUD,THREADEDRING 30

5 SO-7601-0630-26 NUT,THREADEDRINGSTUD 30

6 SO-7507-3407-00 STUD,DISCHARGEMANIFOLD 12

7 SO-7601-0630-26 NUT,DISCHARGEMANIFOLDSTUD 12

8 SO-6318-0148-00 CAGE,LINER 3

9 SO-6318-0177-00 GUIDE,LOWERVALVE(INCLUDESITEM#22,BUSHING) 3

10 SO-6318-0153-00 CLIP,LOCKING(FORLOWERVALVEGUIDE) 3

11 SO-7602-2200-34 SEAL,LINER 6

12 SO-6318-0158-00 PLUG,CYLINDERHEAD 3

13 SO-6318-0130-00 RING,THREADEDCYLINDERHEAD 3

14 SO-6318-0157-00 CAP,THREADEDCYLINDERHEAD 3

15 SO-6310-0084-00 SEAL,VALVEPOTCOVER 3

16 SO-7501-0051-00 SCREW,RETAINER(UPPER) 12

17 SO-6397-0603-00 RETAINERPLATE(UPPER) 3

18 SO-6397-0602-00 GUIDE,UPPERVALVE 3

19 SO-6310-0016-02 COVER,VALVEPOT 3

20 SO-7602-1600-23 SEAL,DISCHARGEMANIFOLD 3

21 SO-7602-1600-38 SEAL,SUCTIONMANIFOLD 3

22 SO-6318-0155-00 BUSHING,LOWERVALVEGUIDE 3


12

14

15

18

17

6

52 3 4

16 7 10 11 8

20

22 23 13 2119 9

EMSCO F-800 | F-1000

TRIPLEX MUD PUMPS




2 SO-6999-0087-02 FLUIDMODULE,ONLY 3






8 SO-7601-0630-28 NUT,THREADEDRINGSTUD 30

9 SO-6319-0026-00 CAGE,LINER 3






15 SO-6397-0603-00 RETAINERPLATE(UPPER) 3


17 SO-6319-0076-00 SEAL,VALVECOVER 3




21 SO-6319-0089-00 CLIP,LOCKING(FORLOWERVALVEGUIDE) 3

22 SO-6319-0087-00 GUIDE,LOWERVALVE(WITHBUSHING) 3

23 SO-7602-2200-32 SEAL,LINER,CYLINDERHEADPLUG 3

EMSCO F-800 | F-1000

TRIPLEX MUD PUMPS


12

1119

21

14

5

13

10

7

20

21

6

5 4 23 27 15 17 18 25

22 3

16

24

26

2 8 9

EMSCO FB-1300 | FB-1600

TRIPLEX MUD PUMPS

EMSCO FB-1300 | FB-1600

TRIPLEX MUD PUMPS






4 SO-7507-2201-00 STUD,CYLINDERHEADTHREADEDRING 18

5 SO-7601-0630-17 NUT,CYLINDERHEADTHREADEDRINGSTUD 48

6 SO-7507-2013-00 STUD,LINERTHREADEDRING 36

7 SO-7601-0610-18 NUT,LINERTHREADEDRINGSTUD 36


9 SO-7601-0630-24 NUT,DISCHARGEMANIFOLDSTUD 12

10 SO-6397-0603-00 PLATE,RETAINER(UPPER) 3





15 SO-6316-0360-00 LOCKBOLT,LOWERVALVEGUIDE 3


17 SO-6316-0354-00 GUIDE,LOWERVALVE(WITHBUSHING) 3

18 SO-6316-0363-00 ALIGNMENTRING 3

19 SO-6316-0367-20 LINERLOCK 3

20 SO-6316-0366-00 RING,LINERTHREADED 3

21 SO-6316-0373-00 SEAL,WEARPLATE/LINER 3




25 SO-6316-0369-00 SEAL,HEADSEAL 3

26 SO-6316-0092-00 SEAL,VALVEPOTCOVER 3


28 SO-6316-0365-00 PLATE,WEAR(NOTSHOWNINDRAWING) 3


104

3

23

11

12

13

14

15

8

7 2 9 8

18

16

17

19

20

6 5 22

21

7 8

15 14 12 11 10

GARDNER DENVER PZ-7 | PZ-8 | PZ-9

TRIPLEX MUD PUMPS

GARDNER DENVER PZ-7 | PZ-8 | PZ-9

TRIPLEX MUD PUMPS



1 SO-205PZL029D MODULE,STUDDEDFLUIDEND(INCLUDESITEMS#2–9) 3

2 SO-205-6651-18 FLUIDMOUDULE,ONLY 3

3 SO-79L188 STUD,FRAME&LINERCLAMP 24

4 SO-50B36 NUT,FRAME&LINERCLAMPSTUD 48

5 SO-79L73 STUD,FRAME 12

6 SO-750AQ30 NUT,FRAMESTUD 12

7 SO-79AL6 STUD,VALVECOVER 48

8 SO-50B34 NUT,VALVECOVERSTUD 60

9 SO-202PZL110 STUD,DISCHARGEMANIFOLD 12

10 SO-2011857 CAP,VALVECOVERLOCK 6

11 SO-2011699-1 RING,VALVECOVERTHREADED(21/2”THICK) 6

11A SO-2011699-2 RING,HEAVYVALVECOVERTHREADED(3”THICK) 6

12 SO-2011860 COVER,VALVE 6



15 SO-2011861 RING,VALVECOVERGASKETEXPANDER 6

SO-2011706 ASSY,LOWERVALVEGUIDE(INCLUDESITEMS#16–20) 3

16 SO-2011701 PLATE,RETAINER 1

17 SO-2011700 GUIDE,LOWERVALVESUCTION 1


19 SO-95W2 WASHER,VALVEGUIDELOCK 2

20 SO-655EE06S SCREW1/2”x13/4”316SSHXHDC/S 2

21 SO-25AL35 SEAL,DISCHARGEMANIFOLD 3

22 SO-25G41 SEAL,SUCTIONMANIFOLD 3

23 SO-IPV14 CLAMP,LINER 3


5

3

9

10

11

12

13

21

5 4 2

20

6 7

19 16

13

12 10 9

18

17

15

14

7

6 8 7

GARDNER DENVER PZ-10 | PZ-11

TRIPLEX MUD PUMPS



1 SO-202PZL029B MODULE,STUDDEDFLUIDEND(INCLUDESITEMS#2–8) 3


3 SO-201PZL110 STUD,FRAME&LINERCLAMPLONG 24

4 SO-205PZL110 STUD,FRAME&LINERCLAMPSHORT 24

5 SO-50B36 NUT,FRAME&LINERCLAMPSTUD 60

6 SO-204PZL110 STUD,THREADEDRING 72

7 SO-50B34 NUT,THREADEDRINGSTUD 84

8 SO-202PZL110 STUD,DISCHARGEMANIFOLD 12

9 SO-200PZL587 CAP,VALVECOVERLOCK 6

10 SO-200PZL147 COVER,VALVE 6

11 SO-2007674 BUSHING,VALVEGUIDE(DISCHARGE) 3

12 SO-204PZL715 GASKET,VALVECOVER 6

13 SO-200PZL387 RING,VALVECOVERTHREADED 6

SO-200PZL483A ASSY,LOWERVALVEGUIDE(INCLUDESITEMS#14–18) 3

14 SO-2011701 PLATE,RETAINER 1

15 SO-200PZL483 GUIDE,VALVESUCTION 1

16 SO-2007674 BUSHING,VALVEGUIDE(SUCTION) 1

17 SO-95W2 WASHER,VALVEGUIDELOCK 2

18 SO-655EE06S SCREW,VALVEGUIDETORETAINERPLATE 2

19 SO-25AL35 GASKET,DISCHARGEMANIFOLD 3

20 SO-25BE41 GASKET,SUCTIONMANIFOLD 3

21 SO-200PZL455 CLAMP,LINER 3

GARDNER DENVER PZ-10 | PZ-11

TRIPLEX MUD PUMPS


13

12

11

9

10

17

3

4

15

14765816

1

2

OILWELL A-600-PT

TRIPLEX MUD PUMPS

OILWELL A-600-PT

TRIPLEX MUD PUMPS



1 SO-10-304-052 DISCHARGEMODULE,STUDDED(INCLUDESITEMS#2–6) 3

2 - DISCHARGEMODULE,ONLY 3


4 SO-16-700-025 NUT,DISCHARGEMANIFOLD 12



7 SO-10-305-110 PLATE,WEAR 6

8 SO-20-100-014 GASKET,LINERWEARPLATE 6

9 SO-75-632-135 CAPSCREW,SELFLOCKING1/2”–13X1” 24

10 SO-20-200-004 BUSHING,VALVEGUIDE 6

11 SO-10-304-054 GUIDE,VALVE 6

12 SO-10-268-004 GASKET,VALVECOVER 6

13 SO-10-305-097 VALVECOVER 6

14 SO-10-305-020 LINERADAPTER 3

15 SO-10-305-037 NUT,LINERADAPTER 3




13

12

11

9

10

2

19

3

4

15

18 8 5 6 7 14 17 16

OILWELL A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT

TRIPLEX MUD PUMPS




2 - FLUIDMODULE,ONLY 3


4 SO-75-511-754 NUT,DISCHARGEMANIFOLD 12


6 SO-75-510-126 NUT,POWERFRAME 12

7 SO-10-300-184 PLATE,WEAR 6

8 SO-20-100-008 GASKET,LINERWEARPLATE 6

9 SO-75-632-234 CAPSCREW,SELFLOCKING 24

10 SO-20-200-004 BUSHING,VALVEGUIDE 6

11 SO-10-300-004 VALVEGUIDE 6

12 SO-10-300-011 GASKET,VALVECOVER 6

13 SO-10-300-005 VALVECOVER 6

14 SO-10-300-183 LINERADAPTER 3

15 SO-10-303-092 NUT,LINERADAPTER(A-850-PT,A-1100-PT,ONLY) 3

SO-10-300-182 NUT,LINERADAPTER(A-1400-PT,A-1700-PT,ONLY) 3

16 SO-10-300-185 RING,LINERSPACER(A-850-PT,A-1100-PT,ONLY) 3

17 SO-10-303-091* SLEEVE,LINERCENTERING(A-850-PT,A-1100-PT,ONLY) 3

SO-10-300-186* SLEEVE,LINERCENTERING(A-1400-PT,A-1700-PT,ONLY) 3



NOTE:*NOTUSEDWITH61/2”ANDLARGERDIAMETERLINERS.

OILWELL A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT

TRIPLEX MUD PUMPS


5

7

4

10

6

9

13

14

6

57

4

53

13

812111512

7

5

IDECO T-500 | T-800 | T-1000

TRIPLEX MUD PUMPS



1 SO-551-458 MODULE,STUDDEDFLUIDEND(INCLUDESITEMS#1–5) 3




5 SO-IN-416 NUT,POWERFRAME/DICHARGEMANIFOLD/THREADEDRING 84

6 SO-551-405-04 RETAINER,THREADEDPLUG 6

7 SO-551-405-03 RING,THREADED 9


9 SO-551-422-03 PLUG,CYLINDERHEAD(TOP) 3

10 SO-551-405-05 RETAINER,THREADEDLINER 3

11 SO-551-405-07 LOWERVALVEGUIDE 3

12 SO-551-422-04 RETAINER,LOWERVALVEGUIDE 3

13 SO-BMT-1669-63-09 GASKET,VALVECOVER 9

14 SO-IO-548 SEAL,DISCHARGEMANIFOLD 3

15 SO-IO-521 SEAL,SUCTIONMANIFOLD 3

16 SO-551-405-09 BUSHING,VALVEGUIDE(NOTSHOWNINDRAWING) 6

17 SO-551-405-06 UPPERVALVEGUIDE(NOTSHOWNINDRAWING) 3

IDECO T-500 | T-800 | T-1000

TRIPLEX MUD PUMPS


IDECO T-1300 | T-1600

TRIPLEX MUD PUMPS

5

7

4

10

6

9

13

14

6

57

4

53

13

812111512

7

5



1 SO-551-122-01 MODULE,FLUIDENDSTUDDED(INCLUDESITEMS#1–5/5A) 3




5 SO-IN-415 NUT,POWERFRAME/THREADEDRING 72

5A SO-IN-416 NUT,DISCHARGEMANIFOLDSTUD(NOTSHOWNINDRAWING) 12

6 SO-551-105-04 CAP,THREADED 6

7 SO-551-105-03 RING,THREADED 9


9 SO-551-122-03 PLUG,CYLINDERHEAD(TOP) 3

10 SO-551-105-05 RETAINER,THREADEDLINER 3

11 SO-551-105-07 GUIDE,LOWERVALVE 3

12 SO-551-105-08 RETAINER,LOWERVALVEGUIDE 3

13 SO-BMT-1669-63-08 SEAL,VALVECOVER 9

14 SO-IO-548 SEAL,DISCHARGEMANIFOLD 3

15 SO-IO-507 SEAL,SUCTIONMANIFOLD 3

16 SO-551-105-06 GUIDE,UPPERVALVE(NOTSHOWNINDRAWING) 3

17 SO-551-105-09 BUSHING,VALVEGUIDE(NOTSHOWNINDRAWING) 6

IDECO T-1300 | T-1600

TRIPLEX MUD PUMPS


HANDLING TOOLS access oiltools PRODUCT CATALOGUE

CORPORATE OFFICE3711 Melancon RoadBroussard, LA 70518Phone (337) 367-5044Fax (337) 367-5047www.accessoiltools.com

HOUSTON OFFICE10801 Hammerly Blvd.Suite 118Houston, Tx. 77043Phone (713) 465-5808Fax (713) 465-5886

rev 1050

1www.accessoiltools.com

TABLE OF CONTENTS

SLIPS Page

Rotary SSlips“DU” SSlips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

“SD” SSlips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Woolley-AA IInserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Woolley-BB IInserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Drill CCollar SSlips“C1” SSlips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

“DCS” SSlips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Casing SSlips“UC-33” SSlips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

“CMSXL” SSlips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

ELEVATORSSlip TType

“LYT” PParts OOnly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

“MYT” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

“YT“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

“HYT” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

“YC” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

“HYC” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

BJ® Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Varco® Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Bottleneck TType“MG” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

“RG” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

“MGG” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

“GG” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

“HGG” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Square SShoulder TType“TA-665” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

“TA-1100” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

“MAA” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

“MRA” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

“SJ-55” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

“SLX-665” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

“SLX-1150” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

rev 805

2rev 805www.accessoiltools.com

SPIDERS Page

3 - 11/2” TTS-1100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

4 - 11/2” TTS-1100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

5 - 11/2” TTS-1100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

API BBowls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Hinged CCasing SSpider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Dual SSpider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Air SSpider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

TONGS“K-225” TTong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

“K-330” TTong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

“K-550” TTong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

“K-550HT” TTong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

“K-770” TTong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Tong DDies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

SAFETY CLAMPS“C” SSafety CClamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

“T” SSafety CClamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

“AMP” SSafety CClamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

BOWLS & BUSHINGSBowls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

KELLY BUSHINGS“4 KKSM” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

“27-HHPD && HHSD” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

STABBING GUIDESStabbing GGuides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

CASING SCRAPERSCasing SScrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

SUPPLEMENTAL INFORMATIONTerms && CConditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Certification CCertificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

3rev 805

AOT “DU” TYPE ROTARY SLIPS

The AOT “DU” Rotary slips are designed for long trouble freeservice. They are made of alloy steel and heat-treated forstrength and resistance to wear. Both slips are for use in APItapered bowls. The AOT “DU” regular has a 12” long grippingsurface and is designed for wells 8000’ or less. The AOT “DU”Long has a 16” long gripping surface and is designed for deepwells and heavier drill strings.

AOT# SLIP BBODY SSIZE TYPE REF# WT.03-114 4 1/2” DU/REGULAR 7613-59 123.0003-115 4 1/2” DU/LONG 7613-64 150.0003-116 5 1/2” DU/REGULAR 7613-60 128.0003-117 5 1/2” DU/LONG 7613-65 162.0003-118 7” DU/REGULAR 7613-62 132.0003-119 7” DU/LONG 7313-66 192.00

REPLACEMENT PARTS FOR AOT “DU” REGULAR ROTARY SLIPSAOT# ITEM# DESCRIPTION *SPARES #REQ. REF.# WWT.03-102 1 REAR HANDLE 1 1 7613-5195 5.0003-105 2 HINGE PIN 2 2 7613-A-12 1.2503-101 3 FRONT HANDLE 2 2 7613-A-157 4.0003-104 4 LINER RETAINER KEY 3 3 7613-A-52 1.5003-106 6 FRONT HANDLE PIN 2 2 7613-B-12 .2503-107 7 REAR HANDLE PIN 1 1 7613-C-12 .3803-108 8 HINGE SPRING ASSY. 2 2 7613-211 1.25

9 INSERTS F/DU SEE PAGE 4 1803-300 10 SAFETY FLEX HANDLE (UNIVERSAL) 3 5.00

REPLACEMENT PARTS FOR AOT “DU” LONG ROTARY SLIPSAOT# ITEM# DESCRIPTION *SPARES #REQ. REF.# WWT.03-102 1 REAR HANDLE 1 1 7613-5195 5.0003-105 2 HINGE PIN 2 2 7613-A-12 1.2503-101 3 FRONT HANDLE 2 2 7613-A-157 4.0003-103 5 LINER RETAINER KEY 3 3 7613-A-67 1.7503-106 6 FRONT HANDLE PIN 2 2 7613-B-12 .2503-107 7 REAR HANDLE PIN 1 1 7613-C-12 .3803-108 8 HINGE SPRING ASSY. 2 2 7613-211 1.25

9 INSERTS F/DU SEE PAGE 4 2403-300 10 SAFETY FLEX HANDLE (UNIVERSAL) 3 5.00

*RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION

www.accessoiltools.com


INSERTS FOR 4 1/2” “DU” ROTARY TYPE SLIPS AND FOR 4 1/2” “TS-100” SPIDER SLIPS

AOT ## DESCRIPTION REF.# WT. AOT ## ((SPECIAL FFULL FFACE IINSERTS)03-120 4 1/2” X 4 1/2” 7613-A-81 .75 03-210

4 1/2” X 4 3/8” N/A .80 03-2134 1/2” X 4 1/4” N/A .85 03-2164 1/2” X 4 1/8” N/A .90 03-219

03-121 4 1/2” X 4” 7613-FF-81 1.00 03-2214 1/2” X 3 3/4” N/A 1.75 03-224

03-122 4 1/2” X 3 1/2” 7613-C-82 1.50 03-2274 1/2” X 3 3/8” N/A 1.65 03-2294 1/2” X 3 1/4” N/A 1.75 03-2284 1/2” X 3 1/8” N/A 1.85 03-2304 1/2” X 3” N/A 1.90 03-231

03-123 4 1/2” X 2 7/8” 7613-B-82 2.00 03-23303-124 4 1/2” X 2 3/8” 7613-A-82 2.25 03-23603-125 4 1/2” X 2 1/16” 7613-M-82 2.50 03-23703-126 4 1/2” X 1.900” 7613-H-82 2.75 03-23803-127 4 1/2” X 1.660” N/A 2.80 03-239

INSERTS FOR 5 1/2” “DU” ROTARY TYPE SLIPS AND 5 1/2” “TS-100” SLIPS

AOT ## DESCRIPTION REF. ## WT. AAOT ## ((SPECIAL FFULL FFACE IINSERTS)5 1/2” X 5 3/4” N/A .85 03-241

03-130 5 1/2” X 5 1/2” 7613-H-81 1.00 03-24003-131 5 1/2” X 5” 7613-G-81 1.50 03-243

5 1/2” X 4 3/4” N/A 1.75 03-24603-132 5 1/2” X 4 1/2” 7613-E-81 2.00 03-249

5 1/2” X4 3/8” N/A 2.10 03-2475 1/2” X 4 1/4” N/A 2.15 03-2525 1/2” X 4 1/8” N/A 2.20 03-255

03-133 5 1/2” X 4” N/A 2.25 03-2585 1/2” X 3 3/4” N/A 2.28 03-261

03-134 5 1/2” X 3 1/2” 7613-E-82 2.31 03-2645 1/2” X 3 1/4” N/A 2.38 03-2665 1/2” X 3 1/8” N/A 2.45 03-2685 1/2” X 3” N/A 2.52 03-2705 1/2” X 2 7/8” N/A 2.60 03-2755 1/2” X 2 3/8” N/A 2.80 03-277

INSERTS FOR 7” “DU” ROTARY TYPE SLIPS

AOT ## DESCRIPTION REF. ## WT. 03-140 7” X 7” 7613-EE-81 1.2503-141 7” X 6 5/8” 7613-DD-81 1.7503-146 7” X 5 7/8” N/A 3.0003-142 7” X 5 1/2” 7613-Z-81 3.2503-143 7” X 5” 7613-Y-81 3.7503-144 7” X 4 1/2” 7613-W-81 4.00

NOTE: “DU” REGULAR REQUIRES 18 INSERTS PER SET“DU” LONG REQUIRES 24 INSERTS PER SET

4 1/2” & 5 1/2” “TS-100” SLIPS REQUIRE 12 INSERTS PER SET* 1 SET INSERTS PER PIPE SIZE RECOMMENDED FOR 1 YEAR SPARES

5rev 805

AOT “SD” TYPE ROTARY SLIPS

All Access “SDML” and “SDXL” Slips are made of alloy steel and heat-treated for strength and long life. These slips are then machined by strict quality control procedures for use in API standard bowls.

AOT “SD” TYPE ROTARY SLIPS LESS INSERTS

AOT# SLIP BBODY SSIZE TYPE REF# WT.23-100 3 1/2” O.D. SDML 15522-1 153.0023-200 4 1/2” O.D. SDML 15565-1 173.0023-300 5” O.D. SDML 15569-1 170.0024-200 4 1/2” O.D. SDXL 15562 182.0024-100 5” O.D. SDXL 15566 193.0024-300 5 1/2” O.D. SDXL 15570 190.00

AOT “SD” TYPE ROTARY SLIPS WITH INSERTSAOT# SLIP SSIZE/PIPE SSIZE TYPE REF# WT.23-135 3 1/2” x 3 1/2” SDML 15522 180.0023-127 3 1/2” x 2 7/8” SDML 15523 188.0023-123 3 1/2” x 2 3/8” SDML 15524 193.0023-245 4 1/2” x 4 1/2” SDML 15565 188.0023-240 4 1/2” x 4” SDML 15564 199.0023-235 4 1/2” x 3 1/2” SDML 15563 207.0023-500 5” x 5” SDML 15569 185.0023-545 5” x 4 1/2” SDML 15568 196.0023-540 5” x 4” SDML 15567 204.0023-455 5 1/2” x 5 1/2” SDML 15573 181.0023-450 5 1/2” x 5” SDML 15572 192.0023-445 5 1/2” x 4 1/2” SDML 15571 200.0024-245 4 1/2” x 4 1/2” SDXL 15513 205.0024-240 4 1/2” x 4” SDXL 15514 219.0024-235 4 1/2” x 3 1/2” SDXL 15515 229.0024-150 5” x 5” SDXL 15516 213.0024-145 5” x 4 1/2” SDXL 15517 227.0024-140 5” x 4” SDXL 15518 237.0024-355 5 1/2” x 5 1/2” SDXL 15519 210.0024-350 5 1/2” x 5” SDXL 15520 224.0024-345 5 1/2” x 4 1/2” SDXL 15521 234.00



REPLACEMENT PARTS FOR “SD” TYPE ROTARY SLIPS

AOT# ITEM# DESCRIPTION SIZE #REQ. REF.# WWT. SPARES*23-150 1 LEFT HANDLE ALL 1 3768 3.50 114-103 2 REAR HANDLE ALL 1 3766 4.00 123-151 3 RIGHT HANDLE ALL 1 3767 3.50 114-105 4 HANDLE PIN w/WASHER & COTTER ALL 3 3769 .50 323-104 5 INSERT RETAINER RING 3 1/2” 3 3738 1.00 323-105 5 INSERT RETAINER RING 4 1/2” 3 3739 1.00 323-106 5 INSERT RETAINER RING 5” 3 3741 1.00 323-107 5 INSERT RETAINER RING 5 1/2” 3 3740 1.00 323-108 5 INSERT RETAINER RING 7” 3 3742 1.00 323-109 6 INSERT RETAINER SCREW & NUT ALL 6 3737 .02 1223-110 7 INSERT SEE CHART23-111 8 HINGE PINS w/COTTER ALL 2 2192 1.20 223-112 9 SAFETY FLEX HANDLE ALL 3 N/A 4.00

*RECOMMENDED SPARE PARTS FOR 1 YEAR SERVICE

INSERTS FOR “SDML” & “SDXL” SLIPSAOT# SIZE TYPE REF# WWT//SET

SDML/SDXL23-155 3 1/2” x 3 1/2” BASIC 2162 10.0023-156 3 1/2” x 2 7/8” REDUCER 2161 15.0023-157 3 1/2” x 2 3/8” REDUCER 2160 20.0023-158 4 1/2” x 4 1/2” BASIC 2165 15.00 / 18.0023-159 4 1/2” x 4” REDUCER 2164 23.00 / 27.0023-160 4 1/2” x 3 1/2” REDUCER 2163 30.00 / 36.0023-161 5” x 5” BASIC 2167 15.00 / 18.0023-162 5” x 4 1/2” REDUCER 2166 23.00 / 27.023-163 5” x 4” REDUCER 2168 30.00 / 36.0023-164 5 1/2” x 5 1/2” BASIC 2170 15.00 / 18.0023-165 5 1/2” x 5” REDUCER 2169 23.00 / 27.0023-163 5 1/2” x 4 1/2” REDUCER 2168 30.00 / 36.0023-166 7” x 7” BASIC 2173 20.00 / 26.0023-167 7” x 6 5/8” REDUCER 2172 25.00 / 41.00

ALL “SDXL” SLIPS EXCEPT 7” TAKE 54 INSERTS3 1/2” “SDML “SLIPS TAKE 30 INSERTS

ALL OTHER “SDML” SLIPS EXCEPT 7” TAKE 45 INSERTS7” “SDXL” SLIPS TAKE 72 INSERTS7” “SDML” SLIPS TAKE 60 INSERTS

* RECOMMENDED SPARES INCLUDE 3 SETS INSERTS FOR EACH PIPE SIZE TO BE RUN

7rev 805

REPLACEMENT PARTS FOR WOOLLEY® TYPE “A” DRILL COLLAR SLIPS

AOT# ITEM ## DESCRIPTION REF ## # RREQ. WT.08-102 1 HANDLE 707-000-0200 3 2.508-103 2 HANDLE PIN 707-000-3000 3 .1520-101 3 HINGE PIN 707-000-0100 • 1.1520-102 4 INSERT RET. PIN 707-000-0600 • .4020-103 5 INSERT 707-000-0500 • .25

REPLACEMENT PARTS FOR VARCO® PS-15 & PS-16 SLIPS

AOT ## DESCRIPTION REF. ## # RREQ. WT.34-700 3 1/2” GUIDE RING 79011-1 1 98.0034-701 4” & 4 1/2” GUIDE RING 79011-2 1 106.0034-702 5” GUIDE RING 79014-3 1 80.0034-703 5 1/2” GUIDE RING 79014-4 1 72.00


rev 805www.accessoiltools.com8

REPLACEMENT PARTS FOR ACCESS TYPE “B” ROTARY SLIPS

AOT# ITEM ## DESCRIPTION REF ## # RREQ. WT.19-101 1 HINGE PIN 737-000-0500 2 1.1219-102 2 RIGHT HANDLE 737-000-0300 1 5.3519-103 3 HANDLE PIN 737-000-0400 3 .2519-104 4 REAR HANDLE 737-000-0200 1 5.5019-105 5 LEFT HANDLE 737-000-0100 1 5.3519-106 6 INSERT RET. PIN 737-000-0600 3 .30

INSERTS FOR ACCESS TYPE “B” ROTARY SLIPAOT# DESCRIPTION REF ## # RREQ. WT.19-250 4-1/2” X 4-1/2” 757-044-0144 * .8519-251 4-1/2” X 4” 757-044-0140 1.2019-252 4-1/2” X 3-1/2” 757-044-0134 1.7519-253 4-1/2” X 2-7/8” 757-044-0127 2.0019-254 4-1/2” X 2-3/8” 757-044-0123 2.1519-255 4-1/2” X 2-1/16” N/A * 2.45

* LONG REQUIRES 24 INSERTS PER SET* REGULAR REQUIRES 18 INSERTS PER SET

9rev 805

AOT “C1” TYPE DRILL COLLAR SLIP

The AOT “C-1” Drill Collar Slip has a multi-segment design that allows it to hinge so that it fits all drill collars within the slip’ssize range. The AOT “C-1” Slip Segments are made of alloy steel which are heat-treated for strength and wear resistance.

AOT TYPE “C-1” DRILL COLLAR SLIPS COMPLETE

AOT ## DRILL CCOLLAR SSIZE // SSLIP RRECESS REFERENCE WT.

08-111 3” - 4 1/2” 7638-5104 112.

08-112 4 1/4” - 5 3/4” 7638-5105 122.

08-113 5 1/2” - 7” 7638-5106 134.

08-114 6 3/4” - 8 1/4” 7638-5107 118.

08-115 8 1/2” - 10” 7638-5108 98.

08-116* 10” - 11 1/4” 7638-5109 158.

08-117 ** 11 1/4” - 12 3/4” 7638-5110 210.

ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® “C-1” DRILL COLLAR SLIPS

* FITS NO. 2 INSERT BOWL** FITS NO. 1 INSERT BOWL



REPLACEMENT PARTS FOR “C-1” DRILL COLLAR SLIPS

AOT ## ITEM ##DESCRIPTION ** SSPARES SIZE REQ* REF. ## WWT.08-102 1 HANDLE 3 3” - 10” 3 7638-A-78 2.5008-102 1 HANDLE 4 10” - 12 3/4” 4 7638-A-78 2.5008-107 2 BODY SEGMENT (RIGHT HAND) 3” - 4 1/2” 1 7638-5099-11 10.7508-120 2 BODY SEGMENT (RIGHT HAND) 4 1/4” - 5 3/4” 1 7638-5100-11 9.2508-124 2 BODY SEGMENT (RIGHT HAND) 5 1/2” - 7” 1 7638-5101-11 8.2508-129 2 BODY SEGMENT (RIGHT HAND) 6 3/4” - 8 1/4” 1 7638-5102-11 7.0008-133 2 BODY SEGMENT (RIGHT HAND) 8 1/2” - 10” 1 7638-5103-11 5.7508-129 2 BODY SEGMENT (RIGHT HAND) 10” - 11 1/4” 1 7638-5102-11 7.0008-124 2 BODY SEGMENT (RIGHT HAND) 11 1/4” - 12 3/4” 1 7638-5101-11 8.2508-108 3 BODY SEGMENT (INTERMEDIATE) 3” - 4 1/2” 6 7638-5099-10 10.7508-121 3 BODY SEGMENT (INTERMEDIATE) 4 1/4” - 5 3/4” 8 7638-5100-10 9.2508-125 3 BODY SEGMENT (INTERMEDIATE) 5 1/2” - 7” 10 7638-5101-10 8.2508-130 3 BODY SEGMENT (INTERMEDIATE) 6 3/4” - 8 1/4” 10 7638-5102-10 7.0008-134 3 BODY SEGMENT (INTERMEDIATE) 8 1/2” - 10” 10 7638-5103-10 5.7508-130 3 BODY SEGMENT (INTERMEDIATE) 10” - 11 1/4” 15 7638-5102-10 7.0008-125 3 BODY SEGMENT (INTERMEDIATE) 11 1/4” - 12 3/4” 17 7638-5101-10 8.2508-109 4 BODY SEGMENT (LEFT HAND) 3” - 4 1/2” 1 7638-5099-12 10.7508-122 4 BODY SEGMENT (LEFT HAND) 4 1/4” - 5 3/4” 1 7638-5100-12 9.2508-126 4 BODY SEGMENT (LEFT HAND) 5 1/2” - 7” 1 7638-5101-12 8.2508-131 4 BODY SEGMENT (LEFT HAND) 6 3/4” - 8 1/4” 1 7638-5102-12 7.0008-135 4 BODY SEGMENT (LEFT HAND) 8 1/2” - 10” 1 7638-5103-12 5.7508-131 4 BODY SEGMENT (LEFT HAND) 10” - 11 1/4” 1 7638-5102-12 7.0008-126 4 BODY SEGMENT (LEFT HAND) 11 1/4” - 12 3/4” 1 7638-5101-12 8.2508-103 5 HANDLE PIN w/COTTER 1 3” - 10” 3 7638-E-2 .1508-103 5 HANDLE PIN w/COTTER 2 10” - 12 3/4” 4 7638-E-2 .1508-104 6 LINER KEEPER w/BOLT & WASHER 4 3” - 4 1/2” 8 7638-5113 1.0008-104 6 LINER KEEPER w/BOLT & WASHER 5 4 1/4” - 5 3/4” 10 7638-5113 1.0008-104 6 LINER KEEPER w/BOLT & WASHER 6 5 1/2” - 10” 12 7638-5113 1.0008-104 6 LINER KEEPER w/BOLT & WASHER 8 10” - 11 1/4” 17 7638-5113 1.0008-104 6 LINER KEEPER w/BOLT & WASHER 9 11 1/4” - 12 3/4” 19 7638-5113 1.0008-105 7 RENEWABLE LINER 3” - 12 3/4” * 7638-116 1.0008-101 8 HINGE PIN w/COTTER 3 3” - 4 1/2” 7 7638-B-59 1.1508-101 8 HINGE PIN w/COTTER 3 4 1/4” - 5 3/4” 9 7638-B-59 1.1508-101 8 HINGE PIN w/COTTER 3 5 1/2” - 8 1/4” 11 7638-B-59 1.1508-106 8 HINGE PIN w/COTTER 3 8 1/2” - 10” 11 7638-B-59 .8508-101 8 HINGE PIN w/COTTER 4 10” - 11 1/4” 16 7638-B-59 1.1508-101 8 HINGE PIN w/COTTER 4 11 1/4” - 12 3/4” 18 7638-B-59 1.1508-136 9 SAFETY FLEX HANDLE ALL A/R N/A 5.00

ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® “C-1” DRILL COLLAR SLIPS*SAME QUANTITY AS ITEM #6

** NUMBER REQUIRED & RECOMMENDED REPLACEMENT PARTS FOR 1 YEARS OPERATION1 SET RENEWABLE LINERS RECOMMENDED FOR 1 YEAR SPARES

11rev 805

AOT “DCS” TYPE DRILL COLLAR SLIPS

The AOT “DCS” Type Drill Collar Slip has a multi-segment design to give a full wrap-around to insure a proper slip setting.The slips are made of alloy steel and heat-treated for strength and long life.

AOT “DCS” DRILL COLLAR SLIPS COMPLETE

AOT# DRILL CCOLLAR SSIZE/ TYPE SSLIP REF# TOTAL SSEGMENTS WT.SLIP RRECESS

16-120 3” - 4” DCS-S 2572 7 112

16-121 4” - 4 7/8” DCS-S 2573 7 103

16-122 4 1/2” - 6” DCS-R 2552 9 120

16-123 5 1/2” - 7” DCS-R 2550 9 112

16-125 5 1/2” - 7” DCS-L 2501 11 172

16-126 6 3/4” - 8 1/4” DCS-L 2503 11 154

16-127 8” - 9 1/2” DCS-L 2507 12 173

16-128 8 1/2” - 10” DCS-L 2530 13 185

16-129 9 1/4” - 11 1/4” DCS-L 2508 14 198

16-130 11” - 12 3/4” DCS-L 2534 17 213

16-131 12” - 14” DCS-L 2536 17 207

NOTE: SLIP SIZES 3” - 9 1/2” FOR USE IN API OR #3 BOWLSLIP SIZES 8 1/2” - 11 1/4” FOR USE IN #2 BOWL

SLIP SIZES 11” - 14” FOR USE IN #1 BOWL

ALL PARTS ARE INTERCHANGEABLE WITH VARCO® “DCS” TYPE DRILL COLLAR SLIPS



REPLACEMENT PARTS FOR AOT “DCS” DRILL COLLAR SLIPS

AOT# ITEM# DESCRIPTION * SSPARES SIZE #REQ. REF#. WT.14-104 1 FRONT HANDLE 2 3” - 14” 2 3765 3.5016-102 2 LEFT HAND SEGMENT f/DCSS 3” - 4 7/8” 1 2569 11.0016-105 2 LEFT HAND SEGMENT f/DCSR 4 1/2” - 7” 1 2555 10.0016-108 2 LEFT HAND SEGMENT f/DCSL 5 1/2” - 14” 1 2511 12.0016-103 3 INTERMEDIATE SEGMENT f/DCSL 3” - 4 7/8” 5 2570 11.0016-106 3 INTERMEDIATE SEGMENT f/DCSR 4 1/2” - 7” 7 2556 10.0016-109 3 INTERMEDIATE SEGMENT f/DCSL 5 1/2” - 8 1/4” 9 2512 12.0016-109 3 INTERMEDIATE SEGMENT f/DCSL 8” - 9 1/2” 10 2512 12.0016-109 3 INTERMEDIATE SEGMENT f/DCSL 8 1/2” - 10” 11 2512 12.0016-109 3 INTERMEDIATE SEGMENT f/DCSL 9 1/4” - 11 1/4” 12 2512 12.0016-109 3 INTERMEDIATE SEGMENT f/DCSL 11 - 14” 15 2512 12.0016-104 4 RIGHT HAND SEGMENT f/DCSS 3” - 4 7/8” 1 2568 11.0016-107 4 RIGHT HAND SEGMENT f/DCSR 4 1/2” - 7” 1 2554 10.0016-110 4 RIGHT HAND SEGMENT f/DCSL 5 1/2” - 14” 1 2510 12.0014-103 5 REAR HANDLE 1 3” - 10” 1 3766 4.0014-103 5 REAR HANDLE 1 9 1/4” - 14” 2 3766 4.0014-105 6 HANDLE PIN 3 3” - 10” 3 3769 .5014-105 6 HANDLE PIN 3 9 1/4” - 14” 4 3769 .5014-106 7 HINGE PIN f/DCSS 4 3” - 4 7/8” 6 2525 .7014-106 7 HINGE PIN f/DCSR 4 4 1/2” - 7” 8 2525 .7016-112 7 HINGE PIN f/DCSL 4 5 1/2” - 8 1/4” 10 2520 .7016-112 7 HINGE PIN f/DCSR 4 8” - 9 1/2” 11 2520 .7016-112 7 HINGE PIN f/DCSR 4 8 1/2” - 10” 12 2520 .7016-112 7 HINGE PIN f/DCSR 4 9 1/4” - 11 1/4” 13 2520 .7016-112 7 HINGE PIN f/DCSR 4 11” - 14” 16 2520 .7023-112 8 SAFETY FLEX HANDLE 3 ALL A/R N/A 4.00

* RECOMMENDED SPARE PARTS FOR 1 YEAR OF OPERATION

BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS

AOT# SLIP TTYPE SIZE REF#. WT./SET QTY.14-628 DCS S 3” - 4” 2628 13.00 4914-620 DCS S 4” - 4 1/2” 2620 8.00 4914-628 DCS R 4 1/2” - 6” 2628 16.00 6314-620 DCS R 5 1/2” - 7” 2620 11.00 6314-513 DCS L 5 1/2” - 7” 2513 19.00 8814-630 DCS L 6 3/4” - 9 1/2” 2630 15.00 8814-630 DCS L 8” - 9 1/2” 2630 16.00 9614-627 DCS L 8 1/2” - 10” 2627 26.00 10414-630 DCS L 9 1/4” - 11 1/4” 2630 19.00 11214-625 DCS L 11” - 12 3/4” 2625 20.00 13614-630 DCS L 12” - 14” 2630 22.00 136

ALL PARTS ARE INTERCHANGEABLE WITH VARCO® “DCS” DRILL COLLAR SLIPSRECOMMENDED SPARE PARTS INCLUDE 2 SETS OF INSERTS FOR EACH SLIP SIZE

13rev 805

AOT “UC-3” CASING SLIPS

AOT ## SLIP W // IINSERTS INTER. R.H. L.H. WT.SIZE FOR OO.D. SEG. // PPN SEG. // PPN SEG. // PPN LBS.

7704-5028 10 3/4” 10 3/4” O.D. 8 / 7704-A-31 1 / 7704-A-32 1 / 7704-A-33 1607704-5029 10 3/4 9 5/8” O.D 8 / 7704-A-31 1 / 7704-A-32 1 / 7704-A-33 1807704-103 10 3/4” LESS LINERS 8 / 7704-A-31 1 / 7704-A-32 1 / 7704-A-33 1307704-5025 13 3/8” 13 3/8” O.D. 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 1957704-5026 13 3/8” 12 3/4” O.D. 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2227704-5027 13 3/8” 11 3/4” O.D. 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2287704-104 13 3/8” LESS LINERS 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 1537704-5036 16” 16” O.D. 12 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2267704-106 16” LESS LINERS 12 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 1767704-5034 20” 20” O.D. 15 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2837704-5035 20” 18 5/8” O.D. 15 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 3257704-110 20” LESS LINERS 15 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2237704-5001 24” 24” O.D. 17 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 3127704-5002 24” 22 1/2” O.D. 17 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 3597704-5009 24” LESS LINERS 17 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2467704-5006 26” 26” O.D. 19 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 3257704-5010 26” LESS LINERS 19 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2527704-5005 30” 30” O.D. 22 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 3677704-5011 30” LESS LINERS 22 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 2837704-5007 36” 36” O.D. 26 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 4377704-5013 36” LESS LINERS 26 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 3407704-5019 42” 42” O.D. 30 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 4957704-5018 42” LESS LINERS 30 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 375

The AOT “UC-3” Type Casing Slip has a 3” taper designed with a single liner per segment and a liner keeper assemblywith bolt and washer. It has a size range of 9-5/8” through 42” and is accomplished with 2 sizes of slips - 9-5/8” through

10-3/4” and



SLIP SSIZE 10 33/4” 113 33/8” 16” 20” 24” 26” 30” 36” 42” PART WT.NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. LBS.

HANDLE 3 4 4 4 4 4 4 6 6 7704-A-17 5.5

HANDLE PIN

W/COTTER 3 4 4 4 4 4 4 6 6 7704-A-16 .5

HINGE PIN

W/COTTER 9 11 13 16 18 20 23 27 31 7704-B-16 .375

KEEPER ASSY.

W/BOLT & WAS. 10 12 14 17 19 21 24 28 32 7704-5024 .25

BOLT & WASHER

F/KEEPER AS REQUIRED 7704-5024-B .08

LINER RETAINER

W/COTTER NOT REQUIRED FOR AOT UC-3 SEGMENT 7704-A-29 .25

LINERS FOR UC-3 & UC-4 CASING SLIPSSLIP PIPE P/N PIPE P/N PIPE P/N # RREQ.SIZE SIZE SIZE SIZE

WT. LLBS. WT. LLBS. WT. LLBS.10 3/4” 10 3/4” 7704-A-8 9 5/8” 7704-A-9 10

3 LBS. 5 LBS.13 3/8” 13 3/8” 7704-A-38 12 3/4” 7704-A-92 11 3/4” 7704-A-39 12

3.5 LBS. 5.75 LBS. 6.25 LBS.16” 16” 7704-A-99 14

3.5 LBS.

20” 20” 7704-A-99 18 5/8” 7704-A-5000 173.5 LBS. 6 LBS.

24” 24” 7704-A-99 22 1/2” 7704-A-5000 193.5 LBS. 6 LBS.

26”-42” 26” -42” 7704-A-100 AS REQUIRED3.5 LBS

REPLACEMENT PARTS FOR “UC-3” CASING SLIPS

15rev 805

AOT TYPE “CMSXL” & “CMS-3” CASING SLIPS

The AOT “CMSXL” & “CMS-3” Casing Slips have a multi-segment design which gives a full wrap-around to help preventdamage to casing. By adding or subtracting segments & inserts the slip can accommodate 6 5/8” - 30” O.D. casing. Thesegments are made of alloy steel and are heat-treated for strength and wear resistance, then machined to strict quality

controlled standards.

AOT “CMSXL” CASING SLIPS COMPLETEAOT ## CASING OO.D. RREF.# WWT. CCOMP. TOTAL SSEG. HINGE PPINS INSERTS14-111 6 5/8” 5315 196 12 11 14-628-14414-112 7” 5301 184 12 11 14-619-14414-113 7 5/8” 5303 166 12 11 14-630-14414-114 8 5/8” 5305 181 13 12 14-630-15614-115 9 5/8” 5307 192 14 13 14-630-16814-116 10 3/4” 5309 209 15 14 14-630-18014-117 11 3/4” 5311 260 17 16 14-627-20414-118 13 3/8” 5313 247 18 17 14-630-21614-119 16” 5325 308 21 20 14-631-25214-120 18 5/8” 5333 367 25 24 14-626-30014-121 20” 5329 383 26 25 14-631-31214-122 24” 5331 443 30 29 14-631-36014-123 26” 5346 486 33 32 14-631-39614-124 30” 5342 546 37 36 14-631-444

NOTE: ALL SLIPS 9 5/8” AND LARGER ARE FURNISHED WITH 4 HANDLES.ALL PARTS ARE INTERCHANGEABLE WITH VARCO® TYPE “CMSXL” CASING SLIPS.

AOT “CMS-3” TAPER CASING SLIPSAOT ## CASING OO.D. WT. CCOMP. TTOTAL SSEG. HINGE PPINS INSERTS14-134 9 5/8” 178 14 13 14-513-16814-135 10 3/4” 194 15 14 14-630-18014-136 11 3/4” 243 17 16 14-627-20414-137 13 3/8” 229 18 17 14-630-21614-138 16” 287 21 20 14-631-25214-139 18 5/8” 342 25 24 14-626-30014-140 20” 357 26 25 14-631-31214-141 24” 413 30 29 14-631-36014-142 26” 453 33 32 14-631-39614-143 30” 509 37 36 14-631-444

ALL PARTS ARE INTERCHANGEABLE W/”CMSXL” EXCEPT SEGMENTS



REPLACEMENT PARTS FOR “CMSXL”, “CMS-3” & “CPS” SLIPS

AOT# ITEM ## DESCRIPTION REF.# *** SSPARES WT.

14-105 1 HANDLE PIN w/WASHER & COTTER 3769 3 .50

14-106 2 HINGE PIN w/COTTER 2525 2 .60

14-100 3 RIGHT HAND SEGMENT f/CMSXL SLIP 5320 12.00

14-148 3 RIGHT HAND SEGMENT f/CMS-3” SLIP N/A 11.00

14-107 4 INTERMEDIATE SEGMENT f/CMSXL SLIP 5322 12.00

14-149 4 INTERMEDIATE SEGMENT f/CMS-3” SLIP N/A N/A 11.00

14-101 5 LEFT HAND SEGMENT f/CMSXL SLIP 5321 12.00

14-150 5 LEFT HAND SEGMENT f/CMS-3” SLIP N/A 11.00

14-104 6 FRONT HANDLE 3765 2 3.50

14-103 7 REAR HANDLE 3766 1 4.00

14-109 8 HINGE SPACER 11944 4.00

ALL PARTS ARE INTERCHANGEABLE WITH VARCO® TYPE “CMSXL” SLIPS** RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION

*FOR RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE

AOT “CPS” CONDUCTOR PIPE SLIPS

AOT ## PIPE OO.D. WT. CCOMPLETE TOTAL SSEGMENTS HINGE SSPACERS INSERTS

14-244 24” 276 13 12 14-631-156

14-266 26” 296 14 13 14-631-168

14-330 30” 319 16 15 14-631-192

NOTE: ALL PARTS ARE INTERCHANGEABLE WITH “CMSXL” SLIP

17rev 805

REPLACEMENT PARTS FOR “LYT” SLIP TYPE ELEVATOR

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E28786 1 INSERT RETAINER PLATE 4 .13E28787 2 INSERT RETAINER SCREW 2 .13E28785 3 SETTING PLATE BOLT 2 .25E339369-13 4 SETTING PLATE WASHER 2 .06E28760 5 SLIP BOLT 4 .25E28761 6 SLIP SPRING 4 .15

SETTING PLATESAOT ## ITEM ## DESCRIPTION # RREQ. WT.E28782 7 2 1/16” SETTING PLATE 1 2.25E28737 7 2” SETTING PLATE 1 2.35E28783 7 1 1/2” (1.900”) SETTING PLATE 1 3.00E28784 7 1 1/4” (1.660”) SETTING PLATE 1 3.10E28736 7 1” (1.315”) SETTING PLATE 1 3.15E28735 7 3/4” (1.050”) SETTING PLATE 1 3.20

INSERTSAOT ## ITEM ## DDESCRIPTION # RREQ. WT.E28772 8 2 1/16” & 2” LYT INSERT 8 .25E28775 8 1 1/2” (1.900”) LYT INSERT 8 .25E28778 8 1 1/4” (1.660”) LYT INSERT 8 .25E28749 8 1” (1.315”) LYT INSERT 8 .25E29370 8 3/4” (1.050”) LYT INSERT 8 .25


18rev 805

AOT 40 TON MYT SLIP TYPE ELEVATOR

AOT ## DESCRIPTION SIZE OOF LLINKS WT.E29328 MYT ELEVATOR COMPLETE LESS SLIP ASSEMBLY. 1 1/4” - 2 3/4” 148.00

MYT SLIP ASSEMBLIESAOT ## DESCRIPTION WT.E29343-1 2 7/8” X 2 7/8” MYT SLIP ASSEMBLY 44.00E29343-2 2 7/8” X 2 3/8” MYT SLIP ASSEMBLY 46.00E29343-3 2 7/8” X 2 1/16” MYT SLIP ASSEMBLY 47.25E29343-4 2 7/8” X 2” MYT SLIP ASSEMBLY 47.50E29343-5 2 7/8” X 1 1/2” (1.900”) MYT SLIP ASSEMBLY 48.75E29343-6 2 7/8” X 1 1/4” (1.660”) MYT SLIP ASSEMBLY 49.75E29343-7 2 7/8” X 1” (1.315”) MYT SLIP ASSEMBLY 49.75E29343-8 2 7/8” X 3/4” (1.050”) MYT SLIP ASSEMBLY. 51.00E29343-10-S 2 7/8” MYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 31.00



MYT REPLACEMENT PARTS

AOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E29333 3 HINGE PIN 1 4.00E30652 4 LATCH 1 10.00E29334 5 LATCH PIN 1 4.00E29338 6 LATCH SPRING 2 1 .50E30653 7 LATCH LOCK 1 2.00E29335 8 LATCH LOCK PIN 2 1 .50E29349 9 LATCH LOCK SPRING 2 1 .25E30841 10 LATCH LOCK DOOR PIN 1 .50E947128-120 11 LATCH PIN RETAINER 2 1 1.50E947128-172 12 LATCH LOCK PIN RETAINER 2 1 .50E940308-1 13 GREASE FITTING 1 .10E30708 N/P LATCH & LATCH LOCK ASSY. 1 12.88E29337 14 LINK BLOCK 2 1.00E29359 15 USE P/N E939009-65 2 .13E939009-65 16 UPPER & LOWER LINK BLOCK PIN 2 2 .45E939484-7 17 LINK BLOCK NUT 2 2 .20E939672-18 18 COTTER PIN 2 2 .10E29336 19 SLIP BOLT 4 4 .75E29340 20 SLIP SPRING 8 4 .25E29347 21 SETTING RING SCREW 4 2 .25E939370-13 22 SETTING PLATE WASHER 4 2 .06E939098-15 23 INSERT RETAINER SCREW 4 2 .13E29344 25 INSERT RETAINER PLATE 4 .50

MYT INSERTS

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E24773 24 2 7/8” X 2 7/8” INSERT 8 .75E29255 24 2 7/8” X 2 3/8” INSERT 8 1.00E29256 24 2 7/8” X 2 1/16” & 2” INSERT 8 1.13E29257 24 2 7/8” X 1 1/2” (1.900”) INSERT 8 1.25E29258 24 2 7/8” X 1 1/4” (1.660”) INSERT 8 1.38E29259 24 2 7/8” X 1” (1.315”) INSERT 8 1.44E29259-1 24 2 7/8” X 3/4” (1.050”) INSERT 8 1.50

RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN

MYT SETTING RINGSAOT ## ITEM ## DESCRIPTION WT.E29348 28 2 7/8” MYT SETTING RING 6.50E29345 28 2 3/8” MYT SETTING RING 6.63E29350 28 2 1/16” MYT SETTING RING 7.00E29351 28 2” MYT SETTING RING 7.10E29352 28 1 1/2” (1.900”) SETTING RING 7.35E29353 28 1 1/4” (1.660”) MYT SETTING RING 7.50E29354 28 1” (1.315”) MYT SETTING RING 7.90E29354-1 28 3/4” (1.050”) MYT SETTING RING 8.05

RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN

20rev 805

AOT YT 75 TON SLIP TYPE ELEVATORAOT ## DESCRIPTION SIZE OOF LLINKS WT.E23105 YT ELEVATOR COMPLETE LESS SLIP ASSY. 2 1/4” - 2 3/4” 355.00

YT SLIP ASSEMBLIES

AOT# DESCRIPTION WT.E23108-5 3 1/2” x 3 1/2” YT SLIP ASSEMBLY 64.00E23108-3 3 1/2” x 2 7/8” YT SLIP ASSEMBLY 76.00E23108-4 2 7/8” x 2 7/8” YT SLIP ASSEMBLY 76.00E23108-6 2 7/8” x 2 3/8” YT SLIP ASSEMBLY 79.00E23108-7 2 7/8” x 2 1/16” YT SLIP ASSEMBLY 81.00E23108-8 2 7/8” x 2” (2.000”) YT SLIP ASSEMBLY 82.00E23108-9 2 7/8” x 1 1/2” (1.900”) YT SLIP ASSEMBLY 83.50E23108-10 2 7/8” x 1 1/4” (1.660”) YT SLIP ASSEMBLY 85.50E23108-11 2 7/8” x 1” (1.315”) YT SLIP ASSEMBLY 86.50E23108 3 1/2” YT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 51.00E23108-2 2 7/8” YT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 51.00

www.accessoiltools.co


YT REPLACEMENT PARTS

AOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E23116-1 3 HINGE PIN 1 4.13E15348 4 LATCH 1 27.00E24182 5 LATCH PIN 1 5.00E12978 6 LATCH SPRING 2 1 .63E12946 7 LATCH CAM 1 1.50E12972 8 LATCH LOCK 1 3.50E13530 9 LATCH LOCK PIN 2 1 .63E12529 10 DOOR LUG PIN 1 .65E29464 11 LATCH PIN RETAINER 2 1 .20E940308-1 12 GREASE FITTING 1 .10E940308-8 13 GREASE FITTING 1 .10E9519 14 LINK BLOCK 2 5.50E8151 15 UPPER LINK BLOCK PIN, NUT & COTTER 2 .50E8145 16 LINK BLOCK BOLT 2 2 1.19E8150 17 LINK BLOCK NUT 2 2 .25E939672-19 18 COTTER PIN 2 2 .10E23115 19 SLIP BOLT 4 4 1.25E23113 20 SLIP SPRING 8 4 .25E23630 21 GUIDE PLATE 1 4.00E939098-75 22 GUIDE PLATE SCREW 2 2 .25E939352-64 23 GUIDE PLATE LOCKWASHER 2 2 .15E27697 24 SETTING PLATE BOLT 8 4 .25E27532 25 INSERT RETAINER SCREW 8 4 .06E27546 26 SETTING RING RETAINER (3 1/2”) 2 2 .13E27507 26 SETTING RING RETAINER (2 7/8”) 2 2 .13E27696 27 RUBBER BUSHING 8 4 .06E24507 28 INSERT SPACER (3 1/2”) 8 8 .13E24508 28 INSERT SPACER ( 2 7/8”) 4 4 .25E27530 31 INSERT RETAINER (3 1/2”) 4 .13E27451 31 INSERT RETAINER (2 7/8”) 4 .25

YT INSERTS

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E24774 30 3 1/2” X 3 1/2” INSERT 24 .50E30358 30 3 1/2” X 2 7/8” INSERT 24 .75E24773 30 2 7/8” X 2 7/8” INSERT 12 .75E29255 30 2 7/8” X 2 3/8” INSERT 12 1.00E29256 30 2 7/8” X 2 1/16” & 2” INSERT 12 1.20E29257 30 2 7/8” X 1 1/2” (1.900”) INSERT 12 1.25E29258 30 2 7/8” X 1 1/4” (1.660”) INSERT 12 1.38E29259 30 2 7/8” X 1” (1.315”) INSERT 12 1.45

RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO RUN

YT SETTING RINGS

AOT ## ITEM ## DESCRIPTION WT.E27813 33 3 1/2” YT SETTING RING 3.13E27695 33 2 7/8” YT SETTING RING 3.56E27694 33 2 3/8” YT SETTING RING 4.00E27812 33 2 1/16” YT SETTING RING 4.25E28821 33 2” YT SETTING RING 4.25E27811 33 1 1/2” (1.900”) YT SETTING RING 4.31E27810 33 1 1/4” (1.660”) YT SETTING RING 4.38E29001 33 1” (1.315”) YT SETTING RING 4.75


22rev 805

AOT HYT 150 TON SLIP TYPE ELEVATOR

AOT ## DESCRIPTION RANGE SIZE OOF LLINKS WT.E39284 HYT ELEVATOR COMPLETE L/SLIPS 2 3/8” - 3 1/2” 2 1/4” - 3 1/2” 740

HYT SLIP ASSEMBLIESAOT ## DESCRIPTION WT.E39258-2 3 1/2” X 3 1/2” HYT SLIP ASSY. 170E39258-4 3 1/2” X 2 7/8” HYT SLIP ASSY. 170E39259-2 2 7/8” X 2 7/8” HYT SLIP ASSY. 170E39259-4 2 7/8” X 2 3/8” HYT SLIP ASSY. 170E39174 3 1/2” HYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 150E39175 2 7/8” HYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 150



HYT REPLACEMENT PARTS

AOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E39239 3 HINGE PIN 1 12.40E39162 4 LATCH 1 22.00E39238 5 LATCH PIN 1 6.00E39240 6 LATCH SPRING 2 1 .70E39161 7 LATCH LOCK 1 1 8.00E39251 8 LATCH LOCK PIN 1 1 .80E39241 9 LATCH LOCK SPRING 2 1 .70E39253 10 HINGE PIN RETAINER 1 .10E39254 11 LATCH PIN RETAINER 1 .40E940308-1 12 GREASE FITTING 1 .10E9519 13 LINK BLOCK 2 5.50E8151 14 UPPER LINK BLOCK BOLT, NUT, & COT. 2 .50E8145 15 LINK BLOCK BOLT 2 2 .50E8150 16 LINK BLOCK NUT 2 2 .15E939672-19 17 COTTER PIN 2 2 .10E52321 18 SLIP BOLT 4 4 1.00E52539-1 19 SLIP SPRING 8 4 .80E51090 20 GUIDE PLATE 1 8.60E939098-65 21 GUIDE PLATE SCREW 4 2 .10E939352-64 22 GUIDE PLATE LOCKWASHER 4 2 .10E94787923 LOCKWIRE A/R .10E939098-96 24 HEX HEAD CAPSCREW 2 .65E939352-6 25 LOCKWASHER 4 .10E51089 26 SETTING RING BUSHING 4 2 .15E939098-36 27 HEX HEAD CAPSCREW 4 2 .20E39247 30 3 1/2” & 3 1/2” X 2 7/8” INSERT RET. 8 4 .25E39246 30 2 7/8” & 2 7/8” X 2 3/8” INSERT RET. 8 4 .25

1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS

HYT INSERTS

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E24774 29 3 1/2” X 3 1/2” INSERT 32 .50E30358 29 3 1/2” X 2 7/8” INSERT 32 .75E24773 29 2 7/8” X 2 7/8” INSERT 16 .75E29255 29 2 7/8” X 2 3/8” INSERT 16 1.00


HYT SETTING RINGS

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E39214-3 31 3 1/2” HYT SETTING RING 1 11.00E39214-2 31 2 7/8” HYT SETTING RING 1 11.00E39214-1 31 2 3/8” HYT SETTING RING 1 13.00


24rev 805

REPLACEMENT PARTS FOR YC SLIP TYPE ELEVATOR

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E30214 1 INSERT RET. RING 3 1/2” - 4 1/2” 4 2.75E30224 1 INSERT RET. RING 5” & 5 /2” 4 2.13E30230 1 INSERT RET. RING 6 5/8” & 7” 4 2.75E941286-73 2 INSERT RET. SCREW 4 .13E30211 3 SETTING PLATE BOLT 4 .25E30213 4 RUBBER BUSHING 4 .06E30216 5 SETTING RING RET. 2 .25E24076 6 SLIP BOLT 4 1.05E24049 7 SLIP SPRING 4 .38E24075 8 GUIDE PLATE SCREW w/NUT 4 .40E93948-8 9 GUIDE PLATE NUT 4 .10E24506 10 INSERT SPACER 8 .25

SETTING PLATES

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E34932 11 3 1/2” SETTING PLATE 1 8.00E30209 11 4” SETTING PLATE 1 8.00E30219 11 4 1/2” SETTING PLATE 1 7.00E30220 11 5” SETTING PLATE 1 6.25E30223 11 5 1/2” SETTING PLATE 1 6.13E30226 11 6 5/8” SETTING PLATE 1 6.00E30229 11 7” SETTING PLATE 1 5.50

BOTTOM GUIDE PLATESAOT ## ITEM ## DESCRIPTION # RREQ. WT.E24071-2 12 7” BOTTOM GUIDE 2 3.75E24071-3 12 6 5/8” BOTTOM GUIDE 2 4.50E24071-1 12 5 1/2” BOTTOM GUIDE 2 5.50E24071 12 5” BOTTOM GUIDE 2 7.75E24071-4 12 4 1/2” BOTTOM GUIDE 8.50E26827 12 4” BOTTOM GUIDE 2 8.50E26827-1 12 3 1/2” BOTTOM GUIDE 2 8.00



AOT HYC 200 TON SLIP TYPE ELEVATORAOT ## DESCRIPTION RANGESIZE OOF LLINKS WT.E55310 HYC ELEVATOR COMPLETE L/SLIPS 3 1/2” - 7 5/8” 2 1/4” - 3 1/2” 978.00

& BOTTOM GUIDES

26rev 805

HYC SLIP ASSEMBLIES

AOT ## DESCRIPTION WT.E70009 7 5/8” X 7 5/8” HYC SLIP ASSY. 216E55515 7” X 7” HYC SLIP ASSY. 224E55514 7” X 6 5/8” HYC SLIP ASSY. 227E55513 5 1/2” X 5 1/2” HYC SLIP ASSY. 243E55512 5 1/2” X 5” HYC SLIP ASSY. 253E55511 4 1/2” X 4 1/2” HYC SLIP ASSY. 265E55510 4 1/2” X 4” HYC SLIP ASSY. 268E55509 4 1/2” X 3 1/2” HYC SLIP ASSY. 274E55305-1 7 5/8” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4) 176E55305 7” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4) 184E55304 5 1/2” HYC SLIP SEGMENTS ONLY (MATCHED SET OF4) 200E55303 4 1/2” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4) 212

HYC REPLACEMENT PARTS

AOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E55311 1 HINGE PIN 1 25.00E55503 2 LATCH 1 47.00 E55312 3 LATCH PIN 1 9.00E34909 4 LATCH SPRING 2 1 1.50E13185 5 LATCH SPRING STOP 1 .25E13152 6 LATCH LOCK 1 1 4.00E15101 7 LATCH LOCK BOLT 1 1 .75E13188 8 LATCH LOCK SPRING 2 1 .25E8150 9 LATCH LOCK BOLT NUT 1 1 .25E939672-19 10 COTTER PIN 1 1 .10E13190 11 DOOR LUG PIN 1 .65E55504 12 HINGE PIN RETAINER 1 .35E55505 13 LATCH PIN RETAINER 1 .20E940308-1 14 GREASE FITTING 1 .10E9519 15 LINK BLOCK 2 5.50E8151 16 UPPER LINK BLOCK BOLT, NUT, & COT. 2 2 .50E8145 17 LINK BLOCK BOLT 2 2 1.19E8150 18 LINK BLOCK NUT 2 2 .25E939672-19 19 COTTER PIN 2 2 .10E24076 20 SLIP BOLT 4 4 1.00E939354-6 21 LOCKWASHER 4 4 .25E945044-2 22 SLIP SPRING 8 4 .35E55508 23 GUIDE PLATE SCREW 8 4 .26E939484-5 24 GUIDE PLATE NUT 8 4 .03E939672-17 25 COTTER PIN 8 4 .10E30216 26 SETTING RING RETAINER (3 1/2” - 7”) 2 2 .25E70147 26 SETTING RING RETAINER ( 7 5/8”) 2 2 .30E55501 27 SHOULDER SCREW 8 4 .41E55502 28 RUBBER BUSHING 8 4 .04E941286-73 29 INSERT RETAINER SCREW 4 4 .08E947879 30 LOCK WIRE A/R .01E70011 31 7 5/8” INSERT RETAINER 4 1.85E30230 31 7” INSERT RETAINER 4 2.00E30227 31 6 5/8” INSERT RETAINER 4 2.00E30224 31 5 1/2” INSERT RETAINER 4 2.50E30221 31 5” INSERT RETAINER 4 2.25E30214 31 4 1/2” - 3 1/2” INSERT RETAINER 4 2.50




HYC INSERTS

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E70010 32 7 5/8” X 7 5/8” INSERT 48 .50E16407 32 7” X 7” INSERT 48 .50E24748 32 7” X 6 5/8” INSERT 48 .75E16407 32 5 1/2” X 5 1/2” INSERT 36 .50E24783 32 5 1/2” X 5” INSERT 36 .80E24785 32 5 1/2” X 4 1/2” INSERT 36 1.05E16408 32 4 1/2” X 4 1/2” INSERT 24 .50E24781 32 4 1/2” X 4” INSERT 24 .80E24779 32 4 1/2” X 3 1/2” INSERT 24 1.00


HYC SETTING RINGS

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E70012 33 7 5/8” HYC SETTING RING 1 11.00E55522 33 7” HYC SETTING RING 1 11.50E55521 33 6 5/8” HYC SETTING RING 1 12.00E55520 33 5 1/2” HYC SETTING RING 1 13.00E55519 33 5” HYC SETTING RING 1 14.50E55518 33 4 1/2” HYC SETTING RING 1 15.00E55517 33 4” HYC SETTING RING 1 16.50E55516 33 3 1/2” HYC SETTING RING 1 18.00


HYC BOTTOM GUIDE PLATES

AOT ## ITEM ## DESCRIPTION # RREQ. WT.E24071-6 34 7 5/8” HYC BOTTOM GUIDE PLATES (SET) 1 5.02E24071-2 34 7” BOTTOM GUIDE 2 3.75E24071-3 34 6 5/8” BOTTOM GUIDE 2 4.50E24071-1 34 5 1/2” BOTTOM GUIDE 2 5.50E24071 34 5” BOTTOM GUIDE 2 7.75E24071-4 34 4 1/2” BOTTOM GUIDE 2 8.50E26827 34 4” BOTTOM GUIDE 2 8.50E26827-1 34 3 1/2” BOTTOM GUIDE 2 8.00

RECOMMENDED SPARES INCLUDE 1 SET BOTTOM GUIDES FOR EACH PIPE SIZE TO BE RUN


BASIC TYPE INSERTS FOR BJ® ELEVATORSYC THROUGH 1000 TON

PIPE NUMBER OOF IINSERTS RREQ.SLIP SIZE 7 55/8” 13 33/8” 13 33/8” 10 33/4” 14” WT.

AOT ## SIZE (OD) YC 175 350 500 500 1000 EA.TON TON TON TON TON

E16441 3 1/2” 3 1/2” 18 .50E16442 4” 4” 16 .50E16408 4 1/2” 4 1/2” 16 27 .50E16407 5 1/2” 5 1/2” 16 27 36 45 45 .50E16407 7” 7” 24 48 60 60 .50E16407 7 5/8” 7 5/8” 45 60 75 75 .50E15660 8 5/8” 8 5/8” 60 75 .50E15660 8 7/8” 8 7/8” 108 .50E15660 9 5/8” 9 5/8” 72 90 90 .50E15660 10 3/4” 10 3/4” 72 90 .50E15660 10 7/8” 10 7/8” 126 .50E15660 11 3/4” 11 3/4” 72 105 .50E15660 12 1/2” 12 1/2” 144 .50E15660 13 3/8” 13 3/8” 84 135 .50E15660 14” 14” 162 .50

REDUCING INSERTS FOR BJ® ELEVATORSYC THROUGH 1000 TON

PIPE NUMBER OOF IINSERTS RREQ.SLIP SIZE 7 55/8” 13 33/8” 13 33/8” 10 33/4” 14” WT.

AOT ## SIZE (OD) YC 175 350 500 500 1000 EA.TON TON TON TON TON

E25780 3 1/2” 2 7/8” 18 .85E24777 3 1/2” 2 3/8” 18 1.20E24781 4 1/2” 4” 16 27 .80E24779 4 1/2” 3 1/2” 16 27 1.00E24783 5 1/2” 5” 16 27 36 45 45 .80E24785 5 1/2” 4 1/2” 16 27 36 45 45 1.05E24748 7” 6 5/8” 24 48 60 60 .75E25474 7 5/8” 6 5/8” 45 60 75 75 1.05E26750 7 5/8” 7” 45 60 75 75 .90E25474 8 5/8” 7 5/8” 45 60 75 1.05E39290 8 7/8” 7 5/8’ 108 1.20E39286 8 7/8” 8 5/8” 108 .65E25474 9 5/8” 8 5/8” 72 90 90 1.05E33249 10 3/4” 9 5/8” 72 90 1.15E39290 10 7/8” 9 5/8” 126 1.30E39285 10 7/8” 10 3/4” 126 .60E25474 11 3/4” 10 3/4” 72 105 126 1.05E39289 12 1/2” 11 3/4” 144 .90E32700 14” 13 3/8” 162 .90


INSERTS FOR VARCO® ELEVATORS/SPIDERS

PIPE NNUMBER OOF IINSERTS RREQUIRED

AOT# DESCRIPTION RREF# SLIP SIZE 200 350 500 750 1000 500 750 WT.

SIZE (OD) TON TON TON TON TON TON TON EA.

75/8” 14” 14” 14” 24”` 224” 24”

23-157 REDUCER 2160 3 1/2” 2 3/8” 12/12B .87

23-156 REDUCER 2161 3 1/2” 2 7/8” 12/12B .64

23-155 BASIC 2162 3 1/2” 3 1/2” 24 .42

23-160 REDUCER 2163 4 1/2” 3 1/2” 16/16B .81

23-159 REDUCER 2164 4 1/2” 4” 16/16B .61

23-158 BASIC 2165 4 1/2” 4 1/2” 32 .42

23-163 REDUCER 2168 5 1/2” 4 1/2” 16/16B 24/16B 32/16B .81

23-165 REDUCER 2169 5 1/2” 5” 16/16B 24/16B 32/16B .61

23-164 BASIC 2170 5 1/2” 51/2” 32 40 48 .42

23-168 REDUCER 2632 7 5/8” 6 5/8” 24/24B36/24B 48/24B 60/24B .81

23-169 REDUCER 2623 7 5/8” 7” 24/24B36/24B 48/24B 60/24B .64

23-170 BASIC 2633 7 5/8” 7 5/8” 48 60 72 84 .42

23-171 REDUCER 2640 9 5/8” 8 5/8” 48/32B 64/32B80/32B 96/24B .81

23-170 BASIC 2633 9 5/8” 9 5/8” 48/32B 64/32B 80/32B 96/24B .42

23-171 REDUCER 2640 11 3/4” 10 3/4” 60/40B 80/40B 100/40B 144/36B .81

23-172 BASIC 2637 11 3/4” 11 3/4” 100 120 140 180 .42

23-172 BASIC 2637 13 3/8” 13 3/8” 100 120 140 .42

23-173 REDUCER 2636 14” 13 3/8” 60/40B 80/40B 100/40B 144/36B .64

23-174 BASIC 2635 14” 14” 100 120 140 180 .42

23-174 BASIC 2635 16” 16” 240 180 210 .42

23-175 REDUCER 13868 20” 18 5/8” 720 420 510 .52

23-174 BASIC 2635 20” 20” 300 180 210 .42

23-174 BASIC 2635 24” 24” 180 210 .42

30rev 805

AOT MG (100 TON) BOTTLENECK ELEVATOR

AOT ## RANGE SIZE OOF LLINKS WT.E30157 2 3/8” - 3 1/2” 1 3/4” - 2 3/4” 308-296

REPLACEMENT PARTS FOR MG ELEVATORS

AOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E26813 1 HINGE PIN * 1 4.85E11763 2 LATCH 1 9.25E26814 3 LATCH PIN * 1 .50E11766 4 LATCH SPRING 2 1 .25E11581 5 LATCH CAM 1 1 .75E11764 6 LATCH LOCK * 1 3.00E11759 7 LATCH LOCK PIN 1 1 .75E12529 8 DOOR LUG PIN 1 .25E8156 9 LATCH PIN RETAINER 1 1 .25E26817 10 LINK BLOCK 2 3.50E8151 11 UPPER LINK BLOCK BOLT, NUT, & COT, 2 .45E8145-2 12 LOWER LINK BLOCK BOLT & NUT, & COT. 2 2 .75E939672-18 13 COTTER PIN 2 3 .10E940308-1 14 GREASE FITTING 1 .10E940308-8 15 GREASE FITTING 1 .10

** 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS



AOT RG (150 TON) BOTTLENECK ELEVATOR

AOT ## RANGE SIZE OOF LLINKS WT.E30156 2 3/8” - 3 1/2” 1 3/4” - 2 3/4” 308-296

REPLACEMENT PARTS FOR RG ELEVATORS

AOT ## ITEM ## DESCRIPTION SPARES # RREQ. WT.E23569 1 HINGE PIN * 1 8.13E23543 2 LATCH 1 1 33.00E23544 3 LATCH PIN * 1 3.90E23546 4 LATCH SPRING 2 1 .75E23548 5 LATCH SPRING STOP 1 1 .88E23729 6 LATCH LOCK * 1 4.00E23553 7 LATCH LOCK BOLT 1 1 1.13E939484-8 8 LATCH LOCK BOLT NUT 1 1 .20E13188 9 LATCH LOCK SPRING 2 1 .30E23547 10 DOOR LUG PIN 1 .25E8156 11 LATCH PIN RETAINER 2 1 .25E9519 12 LINK BLOCK 2 5.50E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 2 .50E8145-2 12 LOWER LINK BLOCK BOLT & NUT & COT. 2 2 .75E939672-18 13 COTTER PIN 3 .10E940308-1 14 GREASE FITTING 1 .10


32rev 805

AOT MGG (250 TON) BOTTLENECK ELEVATORAOT ## RANGE SIZE OOF LLINKS WT.E35005 3 1/2” - 5 1/2” 2 1/4” - 3 1/2” 600.00

REPLACEMENT PARTS FOR MGG ELEVATORSAOT ## ITEM ## DESCRIPTION SPARES # RREQ. WT.E34908 1 HINGE PIN * 1 15.50E34906 2 LATCH 1 57.00E34907 3 LATCH PIN * 1 7.31E34909 4 LATCH SPRING 2 1 2.50E13185 5 LATCH SPRING STOP 1 1 .94E13152 6 LATCH LOCK * 1 4.00E15101 7 LATCH LOCK BOLT 2 1 1.30E939484-8 8 LATCH LOCK BOLT NUT 2 1 .20E13188 9 LATCH LOCK SPRING 2 1 .30E13190 10 DOOR LUG PIN 1 .32E34911 11 LATCH PIN RETAINER 2 1 .13E12732 n/p DOOR CATCH ARM 1 1.50E12916 n/p DOOR CATCH ARM PIN 1 .13E9561 n/p DOOR CATCH SPRING * 1 .13E12734 n/p ROLLER 1 .50E12735 n/p ROLLER PIN 1 .25E9519 12 LINK BLOCK 2 5.50E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 .50E8145-2 14 LOWER LINK BLOCK BOLT & NUT 2 2 .75E939672-19 15 COTTER PIN 3 .06E940308-1 16 GREASE FITTING 1 .10E34910 17 HINGE PIN RETAINER 1 .19



AOT GG (350 TON) BOTTLENECK ELEVATOR

AOT ## RANGE SIZE OOF LLINKS WT.E31068 3 1/2” - 5 1/2” 2 1/4” - 3 1/2” 715.00


REPLACEMENT PARTS FOR GG ELEVATORSAOT ## ITEM ## DESCRIPTION SPARES # RREQ. WT.E33998 1 HINGE PIN * 1 18.38E31071 2 LATCH 1 50.00E33999 3 LATCH PIN * 1 10.38E18416 4 LATCH SPRING 2 1 2.25E13185 5 LATCH SPRING STOP 2 1 .94E13152 6 LATCH LOCK * 1 4.00E15101 7 LATCH LOCK BOLT 2 1 1.30E939484-8 8 LATCH LOCK BOLT NUT 2 1 .20E13188 9 LATCH LOCK SPRING 2 1 .30E13190 10 DOOR LUG PIN 1 .32E32892 11 LATCH PIN RETAINER 2 1 .04E12732 n/p DOOR CATCH ARM 1 1.50E12916 n/p DOOR CATCH ARM PIN 1 .13E9561 n/p DOOR CATCH SPRING * 1 .13E12734 n/p ROLLER 1 .50E12735 n/p ROLLER PIN 1 .25E9519 12 LINK BLOCK 2 5.50E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 .50E8145-2 14 LINK BLOCK BOLT & NUT 2 2 .75E939672-19 15 COTTER PIN 3 .06E940308-1 16 GREASE FITTING 1 .10E31074 11 HINGE PIN RETAINER * 1 .50


AOT HGG (350 TON) BOTTLENECK ELEVATOR

AOT ## RANGE SIZE OOF LLINKS WT.E70013 4” - 6 5/8” 4” - 6 5/8” 715.00

REPLACEMENT PARTS FOR HGG ELEVATORSAOT ## ITEM ## DESCRIPTION SPARES # RREQ. WT.E30553 1 HINGE PIN * 1 18.38E30460 2 LATCH 1 50.00E30613 3 LATCH PIN * 1 10.38E31228 4 LATCH SPRING 2 1 2.25E31215 5 LATCH SPRING STOP 2 1 .94E13152-1 6 LATCH LOCK * 1 4.00E31138 7 LATCH LOCK BOLT 2 1 1.30E939484-8 8 LATCH LOCK BOLT NUT 2 1 .20E13188 9 LATCH LOCK SPRING 2 1 .30E31216 10 DOOR LUG PIN 1 .32E32892 11 LATCH PIN RETAINER 2 1 .04E12732 n/p DOOR CATCH ARM 1 1.50E12916 n/p DOOR CATCH ARM PIN 1 .13E9561 n/p DOOR CATCH SPRING * 1 .13E12734 n/p ROLLER 1 .50E12735 n/p ROLLER PIN 1 .25E30492 12 LINK BLOCK 2 5.50E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 .50E8145-2 14 LINK BLOCK BOLT & NUT 2 2 .75E939672-19 15 COTTER PIN 3 .06E940308-1 16 GREASE FITTING 1 .10E30609 11 HINGE PIN RETAINER * 1 .50




AOT TA-65 (65 TON) & TA-100 (100 TON) CENTER LATCH ELEVATORSAOT ## RANGE DESCRIPTION SIZE OOF LLINKS WT.E32385 1.660 - 2 7/8” TA-65 C. L. ELEVATOR 1 3/4” - 2 3/4” 65.00E32386 3 1/2” - 4 1/2” TA-65 C. L. ELEVATOR 1 3/4” - 2 3/4” 83.00E32383 2 3/8” - 2 7/8” TA-100 C. L. ELEVATOR 1 3/4” - 2 3/4” 119.00E32384 3 1/2” - 4 1/2” TA-100 C.L. ELEVATOR 1 3/4” - 2 3/4” 158.00

REPLACEMENT PARTS FOR TA-65 & TA-100 ELEVATORSAOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E32916 3 HINGE PIN (FRAME 32385) 1 5.00E32915 3 HINGE PIN (FRAME 32386 & 32383) 1 6.00E32919 3 HINGE PIN (FRAME 32384) 1 3.00E32380 4 LATCH 1 5.50E32424-3 5 LATCH PIN (FRAME 32385) 1 1 .75E50713 5 LATCH PIN (FRAME 32386 & 32383) 1 1 1.00E32424-1 5 LATCH PIN (FRAME 32384) 1 1 1.13E32470 6 LATCH SPRING 2 1 .19E32381-1 7 LATCH LOCK 1 2.75E36208 8 LATCH LOCK PIN 2 1 .25E32469 9 LATCH LOCK SPRING 2 1 .19E32382 N/P LATCH LOCK ASSY. 1 8.69E32892 10 HINGE PIN RETAINER (FRAME 32385, 32386 & 32383) 1 .04E32920 10 HINGE PIN RETAINER 1 .06E32430 11 LINK BLOCK 2 2.19E29359 12 USE P/N E939099-65 2 .25E939099-65 13 UPPER & LOWER LINK BLOCK BOLT, NUT & COTTTER 2 2 .40E939484-7 14 LINK BLOCK NUT 2 2 .10E939672-19 15 COTTER PIN 2 2 .06E940308-1 16 GREASE FITTING 2 .10E944048-15 17 EXPANSION PLUG (FRAME 32385) 1 .70E944048-16 17 EXPANSION PLUG (FRAME 32386 & 32384) 1 .70E944048-19 17 EXPANSION PLUG (FRAME 32383) 1 .70

** RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN

36rev 805

AOT MAA (175 TON) CENTER LATCH ELEVATORAOT ## RANGE SIZE OOF LLINKS WT.E12526 2 3/8”- 3 1/2” 2 1/4” - 3 1/2” 88.00

REPLACEMENT PARTS FOR MAA ELEVATORSAOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E12704 1 HINGE PIN 1 5.00E11763 2 LATCH 1 9.25E11758 3 LATCH PIN 1 2.13E11766 4 LATCH SPRING 2 1 .50E11581 5 LATCH CAM 1 1 1.00E11764 6 LATCH LOCK 1 3.00E11759 7 LATCH LOCK PIN 2 1 .57E12529 8 DOOR LUG PIN 1 .19E8156 9 LATCH RETAINER PIN 2 1 .06E9519 10 LINK BLOCK 2 5.50E8151 11 UPPER LINK BLOCK BOLT, NUT , & COTTER 2 2 .50E8145-2 12 LINK BLOCK BOLT 2 2 .80E8150 N/P LINK BLOCK NUT 2 2 .39E9519-1 N/P LINK BLOCK ASSY. 2 7.00E8145-2 N/P LINK BLOCK BOLT ASSY. 2 1.19E939672-18 13 COTTER PIN 2 2 .10E940308-1 14 GREASE FITTING 1 .10E940308-8 15 GREASE FITTING 1 .10




AOT MRA (150 TON) SQUARE SHOULDER ELEVATORAOT ## RANGE SIZE OOF LLINKS WT.E30158 2 3/8” - 5” 1 3/4” - 2 3/4” 210-185

REPLACEMENT PARTS FOR MRA ELEVATORS

AOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E26813 1 HINGE PIN * 1 4.85E11763 2 LATCH 1 9.25E26814 3 LATCH PIN * 1 .50E11766 4 LATCH SPRING 2 1 .25E11581 5 LATCH CAM 1 1 .75E11764 6 LATCH LOCK * 1 3.00E11759 7 LATCH LOCK PIN 1 1 .75E12529 8 DOOR LUG PIN 1 .25E8156 9 LATCH PIN RETAINER 1 1 .25E26817 10 LINK BLOCK 2 3.50E8031 11 LINK BLOCK PIN 2 .45E8145-2 12 LINK BLOCK BOLT, & NUT & 2 2 .75E939672-18 13 COTTER PIN 2 3 .10E940308-1 14 GREASE FITTING 1 .10E940308-8 15 GREASE FITTING 1 .10


38rev 805

AOT SINGLE JOINT ELEVATORS

AOT ## RANGE WT. E39-039 2 3/8” - 5 1/2” 51.00E39-200 2 3/8” - 3 1/2” 63.00E39-210 4” - 5 3/4” 63.00E39-040 5 3/4” - 7 5/8” 69.00E39-041 8” - 10 3/4” 98.00E39-042 11 3/4” - 13 3/8” 130.00E39-043 14” - 20” 213.00

REPLACEMENT PARTS FOR SINGLE JOINT ELEVATORSAOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E39-034 1 2 3/8” - 20” LATCH SPRING 2 1 .08E39-035 2 2 3/8” - 13 3/8” LATCH 1 5.50E39-050 3 2 3/8” - 20” LATCH PIN 1 .35E39-051 4 2 3/8” - 20” LATCH RET PIN ASSY. 1 1 .65E39-052 5 2 3/8” - 13 3/8” HINGE PIN 1 .75E39-054 2 14” - 20” LATCH 1 7.00E39-053 5 14” - 20” HINGE PIN 1 1.00E39-055 6 2 3/8” - 20” HINGE PIN RETAINING PIN 1 .08E34568 N/P SWIVEL SUSPENSION ASSEMBLY 1 19.00

6

5

4

3

2

1



AOT SLX - 65 TON SIDE DOOR ELEVATOR

AOT ## RANGE WT.E38-045 3 1/2” - 5 1/2” 160.00E38-067 5 3/4” - 8 5/8” 190.00E38-809 9” - 10 3/4” 218.00E38-137 11” - 14 1/4” 275.00

REPLACEMENT PARTS FOR SLX- 65 ELEVATORSAOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E33812 1 LATCH LOCK (3 1/2” - 5 1/2”) 1 3.38E33813 2 LATCH (3 1/2” - 5 1/2”) 1 3.44E33816 3 LATCH LOCK SPRING (3 1/2” - 5 1/2”) 2 1 .25E34612 4 HINGE PIN (3 1/2” - 8 5/8”) 1 2.00E29980-3 5 LATCH PIN (3 1/2” - 5 1/2”) 1 .83E29980-3 9 LATCH LOCK PIN (3 1/2” - 5 1/2”) 1 .83E33818 6 LATCH SPRING (3 1/2” - 5 1/2”) 2 1 .19E33817 7 ROLLER 1 .25E31584 8 ROLLER PIN 1 .10E34X6 10 LINK BLOCK BOLT (3 1/2” - 5 1/2”) 2 2 .75E53201 11 GREASE FITTING 2 .10E31332 1 LATCH LOCK (5 3/4” - 14 1/4”) 1 3.50E31331 2 LATCH (5 3/4” - 14 1/4”) 1 4.50E34611 4 HINGE PIN (9 5/8” - 14 1/4”) 1 2.00E32424-3 5 LATCH PIN (5 3/4” - 14 1/4”) 1 .83E29980-4 9 LATCH LOCK PIN (5 3/4” - 14 1/4”) 1 .50E31383 6 LATCH SPRING (5 3/4” - 14 1/4”) 2 1 .45E31404 3 LATCH LOCK SPRING ( 5 3/4” - 14 1/4”) 2 1 .19E34X7 10 LINK BLOCK BOLT (5 3/4”-14 1/4”) 2 2 1.00E34614 12 HINGE PIN RETAINER 1 .06


40rev 805

AOT SLX - 150 (150 TON) SIDE DOOR ELEVATORSAOT ## RANGE WT.E31239 5 1/2” - 8 5/8” 300.00E33950 9 5/8” - 10 3/4” 420.00E33982 11 3/4” - 13 3/8” 475.00E33632 16” - 20” 720.00

REPLACEMENT PARTS FOR SLX-150 ELEVATORSAOT ## ITEM ## DESCRIPTION **SPARES # RREQ. WT.E34611 3 HINGE PIN ( 5 1/2” - 8 5/8”) 1 4.44E33953 3 HINGE PIN ( 9 5/8” - 10 3/4”) 1 6.25E33985 3 HINGE PIN ( 11 3/4” - 13 3/8”) 1 8.50E33646 3 HINGE PIN (16” - 20”) 1 10.00E31331 4 LATCH (5 1/2” - 13 3/8”) 1 4.50E33634 4 LATCH ( 16” - 20”) 1 6.00E32424-3 5 LATCH PIN (5 1/2” - 13 3/8”) 1 1 .75E33645 5 LATCH PIN (16” - 20”) 1 1 2.00E31383 6 LATCH SPRING (5 1/2” - 13 3/8”) 2 1 .44E33657 6 LATCH SPRING (16” - 20”) 2 1 .50E31332 7 LATCH LOCK (5 1/2” - 13 3/8”) 1 3.50E33635 7 LATCH LOCK (16” - 20”) 1 5.00E29980-4 8 LATCH LOCK PIN (5 1/2” - 13 3/8”) 1 1 .50E50713 8 LATCH LOCK PIN (16” - 20”) 1 1 1.00E31404 9 LATCH LOCK SPRING (5 1/2” - 13 3/8”) 2 1 .19E33658 9 LATCH LOCK SPRING (16” - 20”) 2 1 .50E31407 10 ROLLER 1 .38E31584 11 ROLLER PIN 1 .13E34614 12 HINGE PIN RETAINER (5 1/2” - 8 5/8”) 1 .06E32918 12 HINGE PIN RETAINER (9 5/8” - 10 3/4”) 1 .06E32892 12 HINGE PIN RETAINER (11 3 /4” - 20”) 1 .04E9519 13 LINK BLOCK 2 5.50E8151 14 LINK BLOCK PIN 2 2 .50E8145 15 LINK BLOCK BOLT 2 2 .50E8150 16 LINK BLOCK NUT 2 2 .13E939672-20 17 COTTER PIN 2 2 .06E940308-1 18 GREASE FITTING .10


41rev 805

AOT 3-1/2” “TS-100” MANUAL TUBING SPIDER

AOT# ITEM ## DESCRIPTION REF# *SPARES # RREQ. WT.17-300 3-1/2” SPIDER COMPLETE LESS INSERTS N/A 1 238.017-301 SLIP ASSY. LESS INSERTS 7502-104 1 51.017-302 3-1/2” TS-100 BOWL ONLY 7502-100 1 187.017-101 3 RIGHT HAND SEGMENT 7502-C-217 1 13.017-102 4 CENTER SEGMENT 7502-B-217 1 13.017-103 5 LEFT HAND SEGMENT 7502-A-217 1 13.017-104 6 LATCH HANDLE 7502-A-214 1 3.0017-105 LATCH 7502-A-207 1 .5017-108 8 LATCH PIN W/COTTER 7502-B-207 2 1 .1217-109 9 LATCH SPRING 7502-C-207 2 1 .1217-110 10 HINGE PIN F/SLIP W/COTTER 7502-A-216 2 .2517-111 11 LINE KEEPER W/COTTER 7502-B-216 6 3 .1217-112 12 HINGE PIN F/BOWL 7502-A-202 1 4.5017-113 13 LOCK PIN W/BAIL & CHAIN 7502-D-203 1 5.0017-114 14 SNAP RING 7502-103-X 1 1 .08

* RECOMMENDED SPARE PARTS F/1 YEAR OPERATION

INSERTS FOR 3-1/2” “TS-100” SPIDER

AOT# DESCRIPTION REF# # RREQ. WT.21-101 3-1/2” X 3-1/2” 7502-A-5069 9 1.2521-110 3-1/2” X 3-3/8” N/A 9 1.2521-102 3-1/2” X 3-1/8” N/A 9 1.3021-103 3-1/2” X 2-7/8” 7502-A-5070 9 1.5021-104 3-1/2” X 2-3/8” 7502-A-5071 9 1.7521-105 3-1/2” X 2-1/16” 7502-A-5072 9 2.0021-111 3-1/2” X 2” N/A 9 2.1021-106 3-1/2” X 1-1/2” 7502-A-5074 9 2.2521-107 3-1/2” X 1-1/4” 7502-A-5075 9 2.5021-108 3-1/2” X 1” 7502-A-5076 9 2.7521-109 3-1/2” X 3/4” 7502-A-5077 9 2.87

The 3-1/2” TS-100 tubing spider and slip assembly can handletubing sizes 3/4” thru 3-1/2” O.D. by changing 9 removableinserts. The spider and slip are made of alloy steel and heattreated for strength. All come with full certification and databooks are available upon request.



AOT 4-1/2” & 5-1/2” “TS-100” MANUAL SPIDER

COMPLETE SPIDER ASSEMBLIESAOT# DESCRIPTION # RREQ. WT.18-450 4-1/2” TS-100 SPIDER COMPLETE W/SLIPS LESS INSERTS 1 249.018-550 5-1/2” TS-100 SPIDER COMPLETE W/SLIPS LESS INSERTS 1 303.0

REPLACEMENT PARTS FOR 4-1/2” & 5-1/2” “TS-100” SPIDERAOT# ITEM ## DESCRIPTION *SPARES # RREQ. WT.18-451 1 4-1/2” BOWL ONLY 1 155.018-452 2 4-1/2” SLIP ASSY. COMPLETE LESS INSERTS 1 60.018-453 3 4-1/2” SLIP HANDLES ONLY (SET) 1 20.018-454 4 4-1/2” SLIP SEGMENTS EACH 1 6.8018-457 7 4-1/2” HINGE PIN 1 3.5018-458 8 4-1/2” REMOVEABLE HINGE PIN 1 3.7518-455 5 4-1/2” & 5-1/2” INSERT RETAINER PIN 12 1 .2018-456 6 4-1/2” & 5-1/2” SEGMENT RETAINER PIN 6 1 .2518-551 1 5-1/2” BOWL ONLY 1 213.018-552 2 5-1/2” SLIP ASSY. COMPLETE LESS INSERTS 1 70.018-553 3 5-1/2” SLIP HANDLES ONLY (SET) 1 21.018-554 4 5-1/2” SLIP SEGMENTS EACH 2 8.0018-557 7 5-1/2” HINGE PIN 3 4.00 18-558 8 5-1/2” REMOVABLE HINGE PIN 1 4.25PSR 1.625 1 5/8" EXTERNAL SNAP RING

* RECOMMENDED SPARE PARTS F/1 YEAR OPERATIONINSERTS FOR 4-1/2” - 5-1/2” SPIDER ON PAGE 4

The 4-1/2” spider and slip uses the 4-1/2” “DU” rotary slipinsert and has a range of 1.660” thru 4-1/2” O.D. by changingthe 12 inserts. The 5-1/2” spider and slip uses the 5-1/2” “D”Urotary slip insert and has a range of 2-7/8” thru 5-1/2” O.D. bychanging the 12 inserts. The 5-1/2” spider is specificallydesigned to run the Reda or Kobe cable. Both spiders and slipassemblies are designed for heavy duty use. Both are made ofalloy steel and heat treated for strength and wear resistance.Both spiders are rated for 100 ton capacity.

43rev 805

AOT 8-5/8” “API” BOWL

AOT# DESCRIPTION # RREQ. WT.17-850 8-5/8” API BOWL 1 600.017-851 REMOVABLE HINGE PIN W/CHAIN 2 8.0

AOT 200 TON HINGED CASING SPIDERSAOT# DESCRIPTION WT.30-303 30” 200 TON HINGED CASING SPIDER 2200.0030-203 20” 200 TON HINGED CASING SPIDER 1625.0030-133 13-3/8” 200 TON HINGED CASING SPIDER 950.00

NOTE: AOT “CMS-3” SLIPS FIT & BAASH ROSS® UC-3 SLIPS FIT ABOVE SPIDERS

REDUCING BUSHINGS FOR 200 TON HINGED CASING SPIDERSAOT# DESCRIPTION WT.30-326 30” X 26” REDUCING BUSHING 610.0030-324 30” X 24” REDUCING BUSHING 755.0030-320 30” X 20” REDUCING BUSHING 905.0030-216 20” X 16” REDUCING BUSHING 395.0030-213 20” X13-3/8” REDUCING BUSHING 480.0030-190 20” X 10-3/4” REDUCING BUSHING 525.0030-195 13-3/8” X 10-3/4” REDUCING BUSHING 165.0030-188 13-3/8” X 8-5/8” REDUCING BUSHING 265.0030-201 REMOVABLE HINGE PIN W/CHAIN FOR ALL SPIDERS 18.0030-202 BUSHING HANDLE 4.0030-204 BUSHING RETAINER BOLTS & NUTS 1.00

The AOT API BOWL has the same bore and taper (4” per ft.)as the API #3 split bowl. All API drill collar, drill pipe & casingslips can be used in this bowl. It has a range of 2-1/16” thru10” F.J. and is rated for 100 tons.



AOT DUAL SPIDER

The AOT Dual Spider is designed to run dual strings of tubing at the same time or one at a time. The spider has a 100 ton rating. It has a size range of 1” (1.050”) thru 2 7/8” by simply changing inserts.

The spider will run any two different sizes or the same two sizes at the same time.

AOT ## DESCRIPTION # RREQ. WT.17-860 DUAL BOWL COMPLETE W/BUSHING &

2 SLIP ASSY.’S, LESS INSERTS 1 864.0017-861 DUAL BOWL COMPLETE W/BUSHING

LESS SLIP ASSY.’S 1 794.0017-862 DUAL BUSHING ONLY 1 194.0017-863 SLIP ASSY. LESS INSERTS 2 35.0017-864 RIGHT HAND SEGMENT F/DUAL SLIP 1 PER SLIP 11.0017-865 CENTER SEGMENT F/DUAL SLIP 1 PER SLIP 13.0017-866 LEFT HAND SEGMENT F/DUAL SLIP 1 PER SLIP 11.0017-110 HINGE PIN F/SLIP W/COTTER 2 PER SLIP .2517-111 LINER KEEPER W/COTTER 3 PER SLIP .1217-851 REMOVABLE HINGE PIN W/CHAIN 2 8.0017-867 BUSHING RETAINING BOLTS 4 .2517-868 BUSHING LIFTING EYES 2 .40

INSERTS FOR DUAL SLIPS(NOTE EACH SLIP TAKES 6EA. INSERTS

BELOW & 3 REGULAR 3 1/2” TS-100 INSERTS)

AOT ## DESCRIPTION # RREQ. WT.21-103-D 2 7/8” X 2 7/8” INSERT F/DUAL SLIP 6 1.5021-104-D 2 7/8” X 2 3/8” INSERT F/DUAL SLIP 6 1.7521-105-D 2 7/8” X 2 1/16” INSERT F/DUAL SLIP 6 2.0021-106-D 2 7/8” X 1 1/2” (1.900”) INSERT F/DUAL SLIP 6 2.2521-107-D 2 7/8” X 1 1/4” (1.660”) INSERT F/DUAL SLIP 6 2.5021-108-D 2 7/8” X 1” (1.315”) INSERT F/DUAL SLIP 6 2.7521-109-D 2 7/8” X 3/4” (1.050”) INSERT F/DUAL SLIP 6 2.87

INSERTS (SETS) FOR DUAL BOWLAOT ## DESCRIPTION # RREQ. WT.21-103-DSET 2 7/8” X 2 7/8” (SET) INSERTS F/DUAL SLIP 1 PER SLIP 13.5021-104-DSET 2 7/8” X 2 3/8” (SET) INSERTS F/DUAL SLIP 1 PER SLIP 15.7521-105-DSET 2 7/8” X 2 1/16” (SET) INSERTS F/DUAL SLIP 1 PER SLIP 18.0021-106-DSET 2 7/8” X 1 1/2” (1.900” SET) INSERTS F/DUAL SLIP 1 PER SLIP 20.2521-107-DSET 2 7/8” X 1 1/4” (1.660” SET) INSERTS F/DUAL SLIP 1 PER SLIP 22.5021-108-DSET 2 7/8” X 1” (1.315” SET) INSERTS F/DUAL SLIP 1 PER SLIP 24.7521-109-DSET 2 7/8” X 3/4” (1.050” SET) INSERTS F/DUAL SLIP 1 PER SLIP 25.83

45rev 805

AOT HYDRAULIC & PNEUMATIC TUBING SPIDERS

The AOT 125 TON HYD/AIR tubing spider is designed for heavy duty use. It has a size range of 1.315” - 5 1/2” bychanging out slip bodies & inserts. It is made of high alloy heat treated steel for strength & resistance to wear.

The AOT 55 TON HYD/AIR tubing spider is designed for light to medium duty operations with a size range 1.315” - 3 1/2” by changing out the inserts.

AOT HYDRAULIC/PNEUMATIC SPIDERSAOT ## DESCRIPTION # RREQ. WT.34-550 55 TON ASSY. LESS SLIP, INSERTS, HOSES,FOOT CONTROL , AND AIR FILTER 1 217.0034-551 125 TON ASSY. LESS SLIP, INSERTS, HOSES, FOOT CONTROL, AND AIR FILTER 1 345.0034-121 3 1/2” SLIP ASSY. (1.315” - 3 1/2”) LESS INSERTS f/55 TON 1 12.0034-122 3 1/2” SLIP ASSY. (1.315” - 3 1/2”) LESS INSERTS f/125 TON 1 12.0034-123 4 1/2” SLIP ASSY. (3 1/2” - 4 1/2”) LESS INSERTS f/125 TON 1 11.0034-125 5” SLIP ASSY. w/MILL CUT TEETH f/125 TON 1 12.0034-126 5 1/2” SLIP ASSY. w/MILL CUT TEETH f/125 TON 1 11.0034-127 AIR FILTER, PRESSURE REGULATOR, GAUGE ASSY.

w/LUBRICATOR & QUICK CHANGE CONN 1 15.6834-132 HYD. CONTROL VALVE ASSY. 1 25.0034-134 HYD. FOOT VALVE ONLY 1 10.0034-133 HYD. DUST PLUG 4 .2534-128 HYD. PRESSURE REDUCER WITH GAUGE ASSY. 1 8.0034-129 AIR CONTROL VALVE ASSY. FOOT OPERATED W/QUICK CHANGE COUPLING 1 25.0034-130 25’ AIR HOSE 2 5.0034-131 25’ AIR SUPPLY HOSE 2 5.0034-135 25’ HYD. HOSE ASSEMBLY 2 5.0034-136 25’ HYD. HOSE 2 5.00



FULL CIRCLE INSERTSAOT ## DESCRIPTION # RREQ. WT.34-205 3 1/2” X 3 1/2” INSERTS (SET OF 4) 1 9.0034-206 3 1/2” X 2 7/8” INSERTS (SET OF 4) 1 14.0034-207 3 1/2” X 2 3/8” INSERTS (SET OF 4) 1 17.0034-228 3 1/2” X 2 1/16” INSERTS (SET OF 4) 1 18.5034-229 3 1/2” X 1 1/2” (1.900”) INSERTS (SET OF 4) 1 19.0034-230 3 1/2” X 1 1/4” (1.660”) INSERTS (SET OF 4) 1 19.5034-231 3 1/2” X 1” (1.315”) INSERTS (SET OF 4) 1 20.0034-209 4 1/2” X 4 1/2” INSERTS (SET OF 4) 1 10.0034-210 4 1/2” X 4” INSERTS (SET OF 4) 1 12.0034-211 4 1/2” X 3 1/2” INSERTS (SET OF 4) 1 14.00

* RECOMMENDED INSERTS FOR 1 YEAR ORDER 2 SETS FOR EACH SIZE TO BE RUN

SLIP REPLACEMENT PARTS

AOT# DESCRIPTION *SPARES # RREQ. WT.34-150 SLIP BOLT 4 4 .5034-151 NUT F/SLIP 4 4 .1334-152 INSERT RETAINER PIN 4 4 .2034-153 COTTER F/SLIP RETAINER PIN 4 4 .13

REPLACEMENT PARTS FOR55 TON & 125 TON AOT SPIDERS

AOT# AOT# DESCRIPTION *SPARES #REQ. WT.55 TTON 125 TTON34-501 34-601 BODY ONLY 1 283.0034-502 34-602 GATE 1 44.0034-503 34-603 LINK 1 5.5034-504 34-604 SHAFT (LEFT HAND CRANK) 1 8.0034-505 34-605 SHAFT (RIGHT HAND CRANK) ` 1 8.0034-506 34-606 LIFTING ARM 1 3.5034-607 34-607 YOKE 1 1 1.0034-508 34-608 SAFETY GUARD 1 4.5034-609 34-609 GREASE ZERT 2 2 .0334-610 34-610 BOLT 1 1 3.3034-611 34-611 BOLT 1 1 3.3034-612 34-612 NUT 2 2 1.4034-613 34-613 BOLT W/LOCKWASHER 4 4 6.3034-514 34-614 DOOR PIN W/CHAIN 2 2.0034-615 34-615 SET SCREW (FOR LIFTING ARM) 2 2 .1534-616 34-616 TAPER PIN (FOR LIFTING ARM)) 4 4 .5034-517 34-617 RETAINING CLIP 2 2 1.0034-618 34-618 GREASE ZERT 4 4 .0334-519 34-619 CRANK BUSHING 4 4 1.0034-520 34-620 LINK BUSHING 2 2 8.8034-521 34-621 SPACER 2 2.1234-628A 34-628A AIR COUPLING (MALE) 2 2 3.2534-628H 34-628H HYDRAULIC COUPLING (MALE) 2 2 3.2534-629 34-629 SAFETY LATCH 1 1 5.0034-630 34-630 SAFETY BOLT 1 1 3.4534-631 34-631 AIR CYLINDER ASSY. 1 14.0034-632 34-632 HYDRAULIC CYLINDER ASSY. 1 14.0034-633 34-633 JAM NUT 1 1 1.0034-560 34-660 SPARE PARTS KIT F/1YEAR L/INSERTS 1 1 81.32


rev 805 47

AOT “K-25” LIGHT WEIGHT TUBING TONGThe AOT K-25 Tubing Tong has a wide range from 1.050 thru 3.062, and is light-weight with a wrap around

design providing approximately 300o die contact. This prevents crushing or cutting of thin wall tubing. The tong can be used by hand or with a rope block and catline, when making-up or breaking-out tubing.

They are made of high alloy steel, heat-treated for strength and wear, and then tested. The AOT K-25 light-weight tubing tong has a 2,000 ft.-lb maximum torque rating.

All tongs are pull-tested and complete documentation is available with each tong.

AOT ## DESCRIPTION WT.05-101 K-25 TONG COMPLETE LESS DIES, ROPE GUIDE & HANGER 16.5005-102 K-25 TONG COMPLETE LESS DIES w/ROPE GUIDE & HANGER 21.00

REPLACEMENT PARTS FOR “K-20” & “K-25” TUBING TONG

AOT# ITEM# DESCRIPTION REF.# #REQ. WT.* SSPARES05-103 1 TONG HEAD PIN 8527-5025 3 .12 305-104 2 TONG HANDLE PIN 8527-5024 1 .37 105-117 3 SPRING LOCK FOR ALL PINS 904685-71 8 .03 805-105 4 TONG DIE BUSHING & SCREW N/A 6 .06 2405-106 5 K-25 HANDLE JAW 8527-5032 1 2.1205-107 6 K-25 LATCH JAW 8527-5034-03 1 2.1205-108 7 K-25 CENTER JAW 8527-5033 1 1.7505-109 8 K-20 OR K-25 ROPE GUIDE 8527-5023 1 2.7505-110 9 3/4” HEX NUT f/ROPE GUIDE 900645-50 1 .0605-113 10 ROLLOVER HANGER COMPLETE 8527-5018-03 1 1.7505-111 11 3/8” x 2 1/4” HEX CAP SCREW 900020-63 1 .06 205-112 12 3/8” FLEXLOCK NUT 902392-3 1 .06 205-114 13 TONG HANDLE f/K-25 OR K-20 8527-5024 1 9.75

DIES FOR K-20 AND K-25 REFER TO PAGE 54*RECOMMENDED SPARE PARTS FOR ONE YEAR

RECOMMENDED DIES FOR ONE YEAR ORDER 3 FOR EACH SIZE REQUIRED

ALL PARTS ARE INTERCHANGEABLE WITH KELCO** K-20 & K-25 TUBING TONGS



AOT “K-30” MANUAL TUBING TONGThe AOT K-30 Tubing Tong is Designed for heavy duty service of tubing 2.062” to 4.125” OD with a 5,000 ft.-lb.

maximum torque rating. It has a wrap-around design with approximately a 300o die contact. This prevents cutting orcrushing of thin wall tubing. All tongs are pull tested and complete documentation is available with each tong.

AOT ## DESCRIPTION REF# WT.06-101 K-30 TONG ASSEMBLY COMPLETE 8527-5035 48.00

LESS HANGER & DIES06-102 K-30 TONG ASSEMBLY COMPLETE 8527-5036 61.00

LESS DIES w/STANDARD HANGER06-103 K-30 TONG ASSEMBLY COMPLETE 8527-5037 64.00

LESS DIES w/ROLLOVER HANGER

REPLACEMENT PARTS FOR “K-30” TUBING TONGSAOT# ITEM# DESCRIPTION REF# # RREQ. WT. *SPARES06-104 1 K-30 TONG HANDLE 8527-5047 1 24.0006-105 2 K-30 HANDLE JAW 8527-5045 1 8.0006-106 3 K-30 CENTER JAW 8527-5049 1 5.5006-107 4 K-30 LATCH JAW 8527-5050-03 1 5.7506-108 5 TONG HANDLE PIN 8527-5052 1 1 .75 106-109 6 TONG HEAD PIN 8527-5053 3 3 .50 306-157 7 5/32” x 1” SPRINGLOCK 904685-71 8 .03 806-110 8 TONG DIE BUSHING 8527-5055 24 6 .10 2406-111 9 TONG DIE SCREW 902224-11348 6 .06 4806-112 TONG ROLLOVER HANGER ASSY 8527-5045 1 16.0006-113 10 TONG HANGER 8527-5042-03 1 13.0006-155 11 1/2” x 2 1/2” HEX HD CAP SCREW 900020-74 1 or 2 .15 206-156 12 1/2” HEX NUT 900160-5 1 or 2 .08 206-114 13 ROLLOVER BLOCK 8527-5038-03 1 2.5006-115 ROLLOVER LOCK PIN 8527-5040-03 1 .38

DIES FOR K-30 REFER TO PAGE 54RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION

RECOMMENDED DIES FOR 1 YEAR ORDER 3 FOR EACH SIZE PIPE TO BE RUNTONG ROLLOVER HANGER ASSY. CONSISTS OF: TONG HANGER, ROLLOVER BLOCK, LOCK PIN

AND ALL BOLTS & NUTSALL PARTS ARE INTERCHANGEABLE WITH KELCO® K-30 TONGS

49rev 805

AOT “K-50” MANUAL TUBING TONG

The AOT K-50 Manual Tubing Tong is designed for heavy duty service for tubing and casing. It has a size range of 2 7/8” - 51/2” OD with a 7,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300o die contact to

prevent cutting or crushing thin wall pipe. All tongs are pull tested and complete documentation is available.

AOT ## DESCRIPTION WT.06-501 K-50 TONG ASSEMBLY COMPLETE LESS HANGER & DIES 60.0006-502 K-50 TONG ASSEMBLY COMPLETE LESS DIES w/STANDARD HANGER 75.0006-503 K-50 TONG ASSEMBLY COMPLETE LESS DIES w/ROLLOVER HANGER 77.50

REPLACEMENTPARTS FOR “K-50” TUBING TONGS

AOT# ITEM# DESCRIPTION #REQ. WT. *SPARES06-504 1 K-50 TONG HANDLE 1 32.0006-505 2 K-50 HANDLE JAW 1 10.0006-506 3 K-50 CENTER JAW 1 8.0006-507 4 K-50 LATCH JAW 1 8.5006-508 5 TONG HANDLE PIN 1 2.00 106-509 6 TONG HEAD PIN 3 1.50 306-516 7 3/16” x 1 1/2” SPRING LOCK 8 .04 806-510 8 TONG DIE BUSHING 6 .12 2406-511 9 TONG DIE SCREW 6 .06 4806-112 TONG ROLLOVER HANGER ASSEMBLY 1 16.0006-113 10 TONG HANGER 1 13.0006-155 11 1/2” x 2 1/2” HEX HEAD CAP SCREW 1 or 2 .15 206-156 12 1/2” HEX NUT 1 or 2 .08 206-114 13 ROLLOVER BLOCK 1 2.5006-115 ROLLOVER LOCK PIN 1 .38

DIES FOR K-50 REFER TO PAGE 54*RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION

RECOMMENDED DIES FOR 1 YEAR ORDER 3 FOR EACH SIZE PIPE TO BE RUNTONG ROLLOVER HANGER ASSY. CONSISTS OF: TONG HANGER, ROLLOVER BLOCK,

LOCK PIN AND ALL BOLTS & NUTS



AOT “K-50 HT” MANUAL TONG

The AOT K-50 HT Manual Tong is designed for heavy duty service for tubing & casing.It has a size range of 2 3/8” – 5” OD with a 15,000 ft.-lb. maximum torque rating.

It has a wrap-around design with approximately 300Þ die contact to prevent cutting or crushing of thin wall pipe. All tongs are pull tested and complete documentation is available.

AOT# DESCRIPTION WT.06-605 K-50 HT TONG ASSY. COMPLETE LESS HANGER & DIES 8206-606 K-50 HT TONG ASSY. COMPLETE LESS DIES WITH STD. HANGER 9806-607 K-50 HT TONG ASSY. COMPLETE LESS DIES W/ROLLOVER HANGER 100

REPLACEMENT PARTS FOR “K-50 HT” MANUAL TONGS

AOT# ITEM ## DESCRIPTION # RREQ. WT. *SPARES06-704 1 K-50 HT – K-70 TONG HANDLE 1 40.0006-601 2 K-50 HT HANDLE JAW 1 14.0006-602 3 K-50 HT CENTER JAW 1 13.0006-603 4 K-50 HT LATCH JAW 1 13.0006-708 5 TONG HANDLE PIN 1 .75 106-508 6 TONG HEAD PIN 3 .50 306-516 7 3/16” X 1 1/2” SPRING LOCK 8 .04 806-510 8 TONG DIE BUSHING 6 .12 2406-511 9 TONG DIE SCREW 6 .06 4806-112 TONG ROLLOVER HANGER ASSY. 1 16.0006-113 10 TONG HANGER 1 13.0006-155 11 1/2” X 2 1/2” HEX HEAD CAP SCREW 1 OR 2 .15 206-156 12 1/2” HEX NUT 1 OR 2 .08 206-114 13 ROLLOVER BLOCK 1 2.5006-115 ROLLOVER LOCK PIN 1 .38

DIES FOR K-50 HT SAME AS K-50 DIES PAGE 54

51rev 805

AOT “K-70” MANUAL TONG

The AOT K-70 Manual Tong is designed for heavy duty service for tubing & casing. It has a size range of 3 1/2” - 7” OD with a 12,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300Þ die contact to prevent cutting

or crushing of thin wall pipe. All tongs are pull tested and complete documentation is available.

AOT# DESCRIPTION WT.06-701 K-70 TONG ASSY. COMPLETE LESS HANGER & DIES 8206-702 K-70 TONG ASSY. COMPLETE LESS DIES WITH STD. HANGER 9806-703 K-70 TONG ASSY. COMPLETE LESS DIES W/ROLLOVER HANGER 100

REPLACEMENT PARTS FOR “K-70” MANUAL TONGS

AOT# ITEM ## DESCRIPTION # RREQ. WT. *SPARES06-704 1 K-70 TONG HANDLE 1 40.0006-705 2 K-70 HANDLE JAW 1 14.0006-706 3 K-70 CENTER JAW 1 13.0006-707 4 K-70 LATCH JAW 1 13.0006-708 5 TONG HANDLE PIN 1 .7506-508 6 TONG HEAD PIN 3 .5006-516 7 3/16” X 1 1/2” SPRING LOCK 8 .0406-510 8 TONG DIE BUSHING 6 .1206-511 9 TONG DIE SCREW 6 .0606-112 TONG ROLLOVER HANGER ASSY. 1 16.0006-113 10 TONG HANGER 1 13.0006-155 11 1/2” X 2 1/2” HEX HEAD CAP SCREW 1 OR 2 .1506-156 12 1/2” HEX NUT 1 OR 2 .0806-114 13 ROLLOVER BLOCK 1 2.5006-115 ROLLOVER LOCK PIN 1 .38



DIES FOR “K-70” TONGSAOT# DESCRIPTION # RREQ. WT.06-758 K-70 - 3 1/2” 3 13.2506-757 K-70 - 4” 3 12.0006-756 K-70 - 4 1/2” 3 10.5006-755 K-70 - 4 3/4” 3 10.2506-754 K-70 - 5” 3 9.5006-753 K-70 - 5 1/2” 3 8.0006-759 K-70 - 5 3/4” 3 7.2506-752 K-70 - 6” 3 6.2506-751 K-70 - 6 5/8” 3 4.7506-750 K-70 - 7” 3 3.00

DIES FOR “K-20”, “K-25”, “K-30”, “K-50” & “K-50HT” TUBING TONGSAOT# DESCRIPTION REF.# # SSET WT.04-119 K-20 - 3/4” (1.050”) 8527-5056-01 3 1.1304-120 K-20 - 1” (1.315”) 8527-5058-01 3 1.0704-121 K-20 - 1-1/4” (1.660”) 8527-5061-01 3 .9404-122 K-20 - 1-1/2” (1.900”) 8527-5064-01 3 .7504-123 K-20 - 2-1/16” 8527-5066-01 3 .6304-124 K-20 - 2-3/8” 8527-5068-01 3 .4105-129 K-25 - 3/4” (1.050”) N/A 3 1.7505-120 K-25 - 1” (1.315”) 8527-5070-01 3 1.6305-121 K-25 - 1-1/4” (1.660”) 8527-5071-01 3 1.5005-122 K-25 - 1-1/2” (1.900”) 8527-5072-01 3 1.3205-123 K-25 - 2-1/16” 8527-5074-01 3 1.3005-124 K-25 - 2-3/8” 8527-5075-01 3 1.2505-125 K-25 - 2-1/2” 8527-5076-01 3 .9505-126 K-25 - 2.697” 8527-5077-01 3 .6305-127 K-25 - 2.776” N/A 3 .5505-128 K-25 - 2-7/8” 8527-5078-01 3 .5806-132 K-30 - 3/4” N/A 3 5.5006-136 K-30 - 1” N/A 3 5.2506-133 K-30 - 1-1/4” (1.660”) N/A 3 5.0006-134 K-30 - 1-1/2” (1.900”) N/A 3 4.6006-119 K-30 - 2-1/16” 8527-5081-01 3 4.1006-120 K-30 - 2-3/8 8527-5083-01 3 3.8006-121 K-30 - 2-7/8” 8527-5086-01 3 3.1006-135 K-30 - 3” N/A 3 3.0006-122 K-30 - 3-1/16” 8527-5087-01 3 2.8006-123 K-30 - 3-1/8” N/A 3 2.7506-124 K-30 - 3-1/4” 8527-5086-01 3 2.5006-130 K-30 - 3-3/8” N/A 3 2.4006-125 K-30 - 3-1/2” 8527-5090-01 3 2.1006-126 K-30 - 3.668” 8527-5091-01 3 1.7006-127 K-30 - 3-3/4” 8527-5092-01 3 1.5006-131 K-30 - 3-7/8” N/A 3 1.4006-128 K-30 - 4-1/8” 8527-5094-01 3 .8006-575 K-50 & K-50HT - 2-7/8” N/A 3 6.3306-576 K-50 & K-50HT - 3-1/2” N/A 3 5.3306-577 K-50 & K-50HT - 3-3/4” N/A 3 4.7406-578 K-50 & K-50HT - 4” N/A 3 4.1506-579 K-50 & K-50HT - 4-1/8” N/A 3 4.0506-580 K-50 & K-50HT - 4-1/2” N/A 3 3.5006-581 K-50 & K-50HT - 4-3/4” N/A 3 2.9206-582 K-50 & K-50HT - 5” N/A 3 2.3306-583 K-50 & K-50HT -5-1/2” N/A 3 1.17

53rev 805

AOT TYPE “C” SAFETY CLAMP

The AOT Type “C” Safety Clamp is one of the most valuable tools on the Rig Floor. It helps guard against dropping flush-joint pipe, streamlineddrill collars, etc. into the hole while making-up or breaking-out the string. These clamps are ideal as an emergency elevator shoulder for liftingprepacked gravel liners, flush-joint pipe, twisted-off fish and similar items which have no shoulders for attaching conventional elevators. TheType “C” Safety Clamp can be used as a “Slip and Elevator” combination when running large diameter surface casing or used for simplifiedhandling of drilling risers and casing heads during installation. Literally, it has dozens of money and time-saving applications in oilfield work,in addition to giving increased protection against fishing jobs.

The Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered slip which acts as a gripping member,much like a tapered rotary slip, and each slip is held in a retracted position on the taper by spring tension. When the clamp is tightened, eachsmall slip takes a firm initial grip on the surface of the pipe. Should the pipe start to fall, or should load increase occur against the slips, thetaper mounting causes each slip to wedge tighter against the surface of the pipe to increase the grip or lock the pipe against furthermovement.

Gripping pressure is always uniform around the pipe so there is little danger of crushing thin-walled pipe or damaging the pipe surface. And,since each link, complete with tapered slip, is interchangeable as a unit, the Safety Clamp is readily adaptable to virtually any diameter. Eachlink changes the effective gripping diameter of the clamp one inch. All parts are made of alloy steel, heat-treated for strength and grippingability.

CLAMPS WITH HANDLES & WRENCHTYPE ““CR” ((SINGLE SSCREW)

AOT ## RANGE OO.D. SSIZE REFERENCE LINKS RREQUIRED WT.12-127 3 3/4” - 4 5/8” 7624-5103 7 46.00

12-128 4 1/2” - 5 5/8” 7624-5104 8 55.00

12-129 5 1/2” - 6 5/8” 7624-5105 9 60.00

12-130 6 1/2” - 7 5/8” 7624-5105 10 64.00

12-131 7 1/2” - 8 5/8” 7624-5105 11 69.00

12-132 8 1/2” - 9 5/8” 7624-5105 12 73.00

12-133 9 1/2” - 10 5/8” 7624-5105 13 78.00

TYPE ““CL” ((SINGLE SSCREW)12-134 10 1/2” - 11 5/8” 7624-5103 14 82.00

12-135 11 1/2” - 12 5/8” 7624-5104 15 87.00

12-136 12 1/2” - 13 5/8” 7624-5105 16 91.00

12-137 13 1/2” - 14 5/8” 7624-5105 17 115.00

12-138 14 1/2” - 15 5/8” 7624-5105 18 119.00

TYPE ““C XX LL” ((DOUBLE SSCREW)12-145 15 1/2” - 17” 7624-5103 18 121.00

12-146 16 1/2” - 18” 7624-5104 19 125.00

12-147 17 1/2” - 19” 7624-5105 20 129.00

12-148 18 1/2” - 20” 7624-5105 21 134.00

ADD - “B” TO END OF PART NUMBER TO INCLUDE BOX



CLAMPS WITH LIFTING CLEVISTYPE ““CL” ((SINGLE SSCREW)

AOT ## RANGE OO.D. SSIZE REFERENCE ## LINKS RREQUIRED WT.12-150 10 1/2” - 11 5/8” 7624-5103 14 85.0012-151 11 1/2” - 12 5/8” 7624-5104 15 89.0012-152 12 1/2” - 13 5/8” 7624-5105 16 94.0012-153 13 1/2” - 14 5/8” 7624-5105 17 99.0012-154 14 1/2” - 15 5/8” 7624-5105 18 104.00

TYPE ““C XX LL” ((DOUBLE SSCREW)12-155 15 1/2” - 17” 7624-5103 18 36.0012-156 16 1/2” - 18” 7624-5104 19 40.0012-157 17 1/2” - 19” 7624-5105 20 44.0012-158 18 1/2” - 20” 7624-5105 21 44.0012-159 19 1/2” - 21” 7624-5105 22 44.0012-160 21 1/8” - 23” 7624-5103 24 36.0012-161 24 1/8” - 26” 7624-5104 27 40.0012-162 29 1/2” - 31” 7624-5105 32 44.0012-163 35 1/2” - 37” 7624-5105 38 44.0012-164 41 1/2” - 47” 7624-5105 44 44.00

ADD -B TO END OF PART # TO INCLUDE BOX

REPLACEMENT PARTS FOR TYPE “C” SAFETY CLAMP

AOT ## ITEM DESCRIPTION REFERENCE ## ** SSPARES WT.12-101 1 LINK ASSY. COMPLETE 7624-A-7 5.0012-102 2 LINK INTERMEDIATE 7624-A-1 6 3.7512-103 3 INSERT w/COTTER 7624-A-4 1 SET 1.1212-104 5 COTTER f/INSERT 900620-65 .0612-105 4 SPRING f/INSERT 7624-E-5 1 SET .0611-106 6 LINK PIN w/COTTER 7624-C-5 6 .7511-107 7 COTTER f/LINK PIN 900620-36 .0611-108 8 END LINK (SCREW) 7624-A-3 4.5011-109 9 END LINK (PIVOT BLOCK) 7624-A-24 3.5011-110 10 END LINK PIN w/CHAIN 7624-F-5 1 1.2511-111 11 SCREW 7624-A-5 4.0011-112 12 NUT 7624-B-5 1.5011-113 13 PIVOT BLOCK 7624-A-5000 1.5011-114 14 PIVOT BLOCK PIN 7624-D-5 .2511-115 15 NUT WRENCH 7624-A-25 4.0011-116 16 HANDLE (CAST STEEL) 7624-A-6 3.0011-117 17 HANDLE LINK PIN w/COTTER 7624-G-5 .7511-118 18 HANDLE KIT 7624-A-5135 4.0011-119 19 PIVOT BLOCK PIN WRENCH 900533-12 .2511-120 SAFETY CLAMP BOX 7624-A-9 45.0012-119 LIFTING CLEVIS COMPLETE 7624-29 15.0012-120 21 LIFTING CLEVIS ONLY 7624-A-29 9.0012-121 21 CLEVIS PIN & NUT 7624-A-30 2.50

ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “C” SAFETY CLAMPS

** RECOMMENDED SPARE PARTS FOR 1 YEARS SERVICE

55rev 805

AOT TYPE “T” SAFETY CLAMP

SAFETY CLAMP ASSEMBLIES COMPLETE - TYPE “T”

AOT ## RANGE OO.D. SSIZE REFERENCE #LINK RREQ’D WT.11-125 1 1/8” - 2” 7624-5103 4 36.0011-126 2 1/8” - 3 1/4” 7624-5104 5 40.0011-127 3 1/2” - 4 1/2” 7624-5105 6 44.00

ADD -B TO END OF PART NUMBER TO INCLUDE BOX


The AOT Type “T” Safety Clamp is designed for small diameter pipe 1 1/8” - 4 1/2”O.D. Each link changes the effective working range approximately 1” in diameter. Forsizes larger than 4 1/2” O.D., the Type “C” Safety Clamp should be used.

The same positive automatic gripping principle is used as in the Type “C” SafetyClamp. It is ideal to help safeguard against dropping strings of flush joint tubing, toprovide a shoulder to position strings of flush line pipe for welding, and manyother


REPLACEMENT PARTS FOR TYPE “T” SAFETY CLAMP

AOT ## ITEM DESCRIPTION REFERENCE ## ** SSPARES WT.11-101 1 LINK ASSY. COMPLETE 7624-B-7 4.25

11-102 2 LINK INTERMEDIATE 7624-A-18 3 3.25

11-103 3 INSERT w/COTTER 7624-A-21 6 .25

11-104 4 COTTER f/INSERT 900620-52 .06

11-105 5 SPRING f/INSERT 7624-B-21 6 .06

11-106 6 LINK PIN w/COTTER 7624-C-5 3 .75

11-107 7 COTTER f/LINK PIN 900620-36 .06

11-108 8 END LINK (SCREW) 7624-A-20 4.50

11-109 9 END LINK (PIVOT BLOCK) 7624-A-19 3.50

11-110 10 END LINK PIN w/CHAIN 7624-F-5 1 1.25

11-111 11 SCREW 7624-A-5 4.00

11-112 12 NUT 7624-B-5 1.50

11-113 13 PIVOT BLOCK 7624-A-5000 1.50

11-114 14 PIVOT BLOCK PIN 7624-D-5 .25

11-115 15 NUT WRENCH 7624-A-25 4.00

11-116 16 HANDLE (CAST STEEL) 7624-A-22 3.00

11-117 17 HANDLE LINK PIN w/COTTER 7624-G-5 .75

11-118 18 HANDLE KIT 7624-A-5138 4.00

11-119 19 PIVOT BLOCK PIN WRENCH 900533-12 .12

11-120 N/P SAFETY CLAMP BOX 7624-A-9 45.00

11-121 N/P 1 YEAR SPARE PARTS KIT N/A 1 13.00

ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “T” SAFETY CLAMPS** RECOMMENDED SPARE PARTS FOR 1 YEARS SERVICE

rev 805 57

AOT TYPE “A-MP” SAFETY CLAMPS

AOT ## RANGE REFERENCE ## # LLINKS GRIPPING DDIES WT.A-MMP-SS31-009 2 7/8” - 4 1/8” 33030 7 8 128.0031-010 4” - 5” 33031 8 9 133.00

A-MMP-RR31-011 4 1/2” - 5 5/8” 33011 7 8 120.0031-012 5 1/2” - 7” 33012 8 9 130.0031-013 6 3/4” - 8 1/4” 33013 9 10 138.0031-014 8” - 9 1/4” 33014 10 11 147.0031-015 9 1/4” - 10 1/2” 33015 11 12 155.00

A-MMP-MM31-016 10 1/2” - 11 1/2” 33016 12 13 163.0031-017 11 1/2” - 12 1/2” 33017 13 14 171.0031-018 12 1/2” - 13 5/8” 33018 14 15 179.0031-019 13 5/8” - 14 3/4” 33019 15 16 187.0031-020 14 3/4” - 15 7/8” 31020 16 17 195.00

A-MMP-LL31-021 15 7/8” - 17” 33021 17 18 215.0031-022 17” - 18 1/2” 33022 18 19 223.0031-023 18 1/8” - 19 3/8” 33023 19 20 231.00

A-MMP-XXL31-024 19 3/8” - 20 3/8” 33024 19 20 280.0031-025 20 3/8” - 21 1/2” 33025 20 21 288.0031-032 21” - 22 5/8” 33032 21 22 296.0031-033 22 5/8” - 23 3/4” 33033 22 23 304.0031-034 23 3/4” - 24 7/8” 33034 23 24 312.0031-035 24 7/8” - 26” 33035 24 25 320.0031-036 26” - 27 1/8” 33036 25 26 328.0031-039 29 3/8” - 30 1/2” 33039 28 29 336.00



REPLACEMENT PARTS FOR “A-MP” TYPE SAFETY CLAMPS

AOT ## ITEM ## DESCRIPTION CLAMP TTYPE REF. # QQTY. WT.31-335 1 LINK COMPLETE MP-S ONLY 3335 AR 9.0031-319 1 LINK COMPLETE ALL EXCEPT MP-S 3319 AR 8.7531-307 2 PIN, FOR LINK (w/COTTER) ALL 3307 AR .7531-306 3 LINK (W/COTTER) ALL 3306 AR 4.5031-325 4 CARRIER ASSY. (w/DIE) MP-S ONLY 3325 AR 3.0031-324 4 CARRIER ASSY. (w/DIE) ALL EXCEPT MP-S 3324 AR 2.5031-333 5 DIE (w/COTTER) MP-S ONLY 3333 AR 1.5031-310 5 DIE (w/COTTER) ALL EXCEPT MP-S 3310 AR 1.0031-309 6 CARRIER (LESS DIE) ALL 3309 AR 2.5031-311 7 SPRING ALL 3311 AR .1031-418 8 ROLL PIN (DIE KEEPER) ALL 51604-18 AR .1031-528 9 COTTER PIN (f/CARRIER) ALL 51405-28 AR .1831-318 10 SIDE BAR LINKS (PAIR) ALL 3318 AR 2.5031-304 11 LATCH LINK ALL EXCEPT MP-XL 3304 1 7.0031-321 11 LATCH LINK MP-XL ONLY 3321 1 14.0031-308 12 PIN FOR SCREW, (w/COTTER ALL 3308 1 .5031-315 13 BUSHING F/SCREW PIN ALL 3315 1 .3331-510 14 COTTER F/LINK PIN ALL 51405-10 AR .0831-302 15 SCREW ALL 3302 1 5.2531-714 16 THRUST WASHER ALL 2714 1 1.0031-303 17 NUT F/SCREW ALL 3303 1 3.5031-305 18 HANDLE MP-S,MP-R, & MP-M 3305 2 4.5031-305 18 HANDLE MP-L & MP-XL 3305 4 4.5031-316 N/P HOLD DOWN LUG SEE ITEM 18 3316 OPT. 5.7531-317 19 LIFTING EYE SEE ITEM 18 3317 OPT. 4.7531-320 20 NUT WRENCH ALL 3320 1 5.00

RECOMMENDED SPARE PARTS FOR 1 YEAR FOR “A-MP” TYPE CLAMPS

AOT ## DESCRIPTION A-MMP-SS A-MMP-RR A-MMP-MM A-MMP-LL A-MMP-XXL 31-008 DIE W/COTTER 431-310 DIE W/COTTER 6 8 10 1331-311 SPRING 9 12 17 20 2631-528 PIN W/COTTER 4 6 8 10 1331-418 ROLL PIN 9 12 17 20 26

59rev 805

AOT INSERT BOWLS

AOT ## DESCRIPTION MB = Master Bushings REFERENCE ## WT.34-101 INSERT BOWL NO. 1 FOR 13 3/8” - 11 3/4” 1903 326

CASING (23” - 27 1/2” Master Bushings)34-102 INSERT BOWL NO. 2 FOR 10 3/4” - 9 5/8” 1904 460

CASING (23” - 27” Master Bushings)34-103 INSERT BOWL NO. 3 FOR 8 5/8” & SMALLER 1810 664

(23” - 27 1/2” Master Bushings)34-301 INSERT BOWL NO. 1 FOR 13 3/8” - 11 3/4” 6610 335

CASING (37 1/2” - 49 1/2” Master Bushings)34-302 INSERT BOWL NO. 2 FOR 10 3/4” - 9 5/8” 6609 470

CASING (37 1/2” - 49 1/2” Master Bushings)34-303 INSERT BOWL NO. 3 FOR 8 5/8” & SMALLER 6608 625

(37 1/2” - 49 1/2” Master Bushings)

AOT CASING BUSHINGS

AOT ## DESCRIPTION REFERENCE ## WT.34-401 20” CB BUSHING FOR ALL 27 1/2” 6695 713

API ROTARY TABLES (SPLIT)34-418 20” CUL BUSHING FOR ALL 27 1/2” 3103 975

API ROTARY TABLES (SOLID)34-405 20” CB BUSHING FOR 37 1/2” - 49 1/2” 10187 1600

NATIONAL ROTARY TABLES34-411 24” CB BUSHING FOR 37 1/2” - 49 1/2” 11253 1200




OILWELL, WIRTH, & GARDNER-DENVER34-422 24” CB BUSHING FOR 37 1/2” - 49 1/2” 6170 1400

OILWELL, WIRTH, & GARDNER-DENVER34-421 26” CB BUSHING FOR 37 1/2” - 49 1/2” 6170-26 1250



IDECO ROTARY TABLES34-424 26” CB BUSHING FOR 37 1/2” – 49 ½” N/A 1160

IDECO ROTARY TABLES34-423 30” CB BUSHING FOR 37 ½” – 49 ½” 12092 MTO 1100

IDECO ROTARY TABLES34-408 20” CB BUSHING FOR 37 1/2” - 49 1/2” 11553 1600

EMSCO (S/N 49 AND UP)34-419 30” CB BUSHING F/37 1/2” - 49 1/2” EMSCO 11633 1160

ROTARY TABLE (S/N 49 AND UP)

CB

Insert BBowl NNo. 11 Insert BBowl NNo. 22 Insert BBowl NNo. 33

CUL



AOT REDUCING BUSHINGS FOR CB & CUL

AOT ## DESCRIPTION REFERENCE ## WT.34-409 20” X 16” REDUCING BUSHING FOR 6127 570

CB BUSHING34-410 13 3/8” - 11 3/4” NO. 1 INSERT BOWL FOR 6126 900

CB BUSHING34-416 10 3/4” - 9 5/8” NO. 2 INSERT BOWL FOR 6114 252

CB BUSHING34-417 20” X 16” REDUCING BUSHING FOR 3104 562

CUL BUSHING34-413 13 3/8” - 11 3/4” NO. 1 INSERT BOWL FOR 3105 846

CUL BUSHING34-414 10 3/4” - 9 5/8” NO. 2 INSERT BOWL FOR 1902 242

CUL BUSHING34-415 8 5/8” & SMALLER NO. 3 INSERT BOWL 1809 464

FOR CUL BUSHING

ACCESSORIES

AOT ## DESCRIPTION REFERENCE ## WT.34-315 LIFTING SLINGS (2 HOOK) 1021 4034-316 LIFTING SLINGS (4 HOOK) 6699 150

61rev 805

“4-KSM” MEDIUM DUTY KELLY BUSHING

The AOT 4 KSM Kelly Bushing is a medium duty square drive bushing. It will accommodate 2 1/2” - 5 1/4”square

KELLY SSIZE “4 KKSM” CCOMPLETE WT. REF NNO.TYPE W/WRENCH && WWIPER

3” HEX 33-230 860 1402-30

3 1/2” HEX 33-235 860 1402-35

4 1/4” HEX 33-242 860 1402-42

2 1/2” SQUARE 33-125 870 1401-25

3” SQUARE 33-130 870 1401-30

3 1/2' SQUARE 33-135 870 1401-35

4 1/4” SQUARE 33-142 870 1401-42

5 1/4” SQUARE 33-152 870 1401-52

REPLACEMENT PARTS FOR “4-KSM” KELLY BUSHINGDESCRIPTION AOT# QTY. WT. SSPARES REF.#BODY ASSY. COMP.LESS ROLLER ASSY. 33-403 1 615.00 1403STUD 33-414 4 5.00 1414HOLDDOWN BOLT NUT 33-208 4 1.75 1208HOLDDOWN BOLTLOCKWASHER 33-924 4 .25 50924WRENCH 32-210 1 8.00 1210WIPER RET. RING 33-417 1 8.75 1417SCREWS f/ RING 33-106 8 .16 50106-8-SD

ROLLER PIN w/

LUBE FITTING 33-411 4 8.00 4 1411

ROLLER BEARING 33-412 4 3.00 4 1412

THRUST WASHER 33-413 8 2.00 8 1413

SLEEVE BEARING 33-422 4 1.00 4 1422



ROLLERS & WIPERS FOR “4-KSM” KELLY BUSHINGS

KELLY SSIZE ROLLER AASSY. WT. RROLLERS OONLY WWT. V FFLAT WIPER

TYPE ROLLER ROLLER

3” HEX 33-450 235 33-738 175 33-438 33-437 33-125

3 1/2” HEX 33-451 215 33-940 160 33-440 33-439 33-126

4 1/4” HEX 33-452 190 33-294 135 33-442 33-441 33-127

2 1/2” SQUARE 33-445 245 33-304 185 33-430 33-117

3” SQUARE 33-446 230 33-314 170 33-431 33-118

3 1/2” SQUARE 33-447 205 33-324 145 33-432 33-119

4 1/4” SQUARE 33-448 175 33-334 115 33-433 33-120

5 1/4” SQUARE 33-449 135 33-344 75 33-434 33-121

*RECOMMENDED SPARES INCLUDE ONE SET OF ROLLERS FOR EACH SIZE TO BE RUN*RECOMMENDED SPARES INCLUDE TWO WIPER RUBBERS FOR EACH SIZE KELLY TO BE RUN

ROLLERS & WIPERS FOR “27-HPD” & “HSD” KELLY BUSHINGS

KELLY SSIZE ROLLER AASSY. WT. RROLLERS OONLY WWT. V FFLAT WIPER

TYPE ROLLER ROLLER

3” HEX 32-667 615 32-839 420 32-339 32-338 32-107

3 1/2” HEX 32-668 585 32-041 390 32-341 32-340 32-108

4 1/4” HEX 32-669 535 33-243 340 32-343 32-342 32-109

5” SPEC HEX 32-671 485 32-788 295 32-388 32-387 32-110

5 1/4” HEX 32-672 475 32-445 290 32-345 32-329 32-111

6” HEX 32-673 415 32-647 220 32-347 32-330 32-112

3” SQUARE 32-674 590 32-314 400 32-331 32-100

3 1/2” SQUARE 32-661 565 33-324 370 32-332 32-101

4 1/4” SQUARE 32-662 515 32-334 320 32-333 32-102

5 1/4” SQUARE 32-665 435 32-344 245 32-335 32-103

6” SQUARE 32-666 375 32-354 180 32-336 32-104

* RECOMMENDED SPARES INCLUDE ONE SET OF ROLLERS FOR EACH SIZE TO BE RUN

*RECOMMENDED SPARES INCLUDE TWO WIPER RUBBERS FOR EACH SIZE OF KELLY TO BE RUN

63rev 805

“27-HPD” PIN DRIVE & “HSD” SQUARE DRIVE KELLY BUSHINGS

The AOT HS and HP series of Kelly Drive Bushings are designed for rugged high torque, high speed drillingoperations They will accomodate 3” Hex thru 6” Square Kellys. The 27-HPD bushing fits 22” - 49 1/2” pin drivemaster bushings. The HSD bushing fits square drive master bushings.

KELLY “27-HHPD” CCOMPLETE REF NNO. “HSD” CCOMPLETE REF NNO.SIZE // TTYPE w/WRENCH && WWIPER

PART NNO. WT. PART NNO. WT.

3” HEX 32-030 1445 3650-30 32-530 1425 3635-30

3 1/2” HEX 32-035 1445 3650-35 32-535 1425 3635-35

4 1/4” HEX 32-042 1445 3650-42 32-542 1425 3635-42

5” HEX 32-050 1445 3650-50 32-550 1425 3635-50

5 1/4” HEX 32-052 1445 3650-52 32-552 1425 3635-52

6” HEX 32-060 1445 3650-60 32-560 1425 3635-60

3” SQUARE 32-130 1500 3651-30 32-630 1475 3636-30

3 1/2” SQUARE 32-135 1500 3651-35 32-635 1475 3636-35

4 1/4” SQUARE 32-142 1500 3651-42 32-642 1475 3636-42

5 1/4” SQUARE 32-152 1500 3651-52 32-652 1475 3636-52

6” SQUARE 32-160 1500 3651-60 32-660 1475 3636-60



REPLACEMENT PARTS FOR “27-HPD” & “HSD” KELLY BUSHINGS

DESCRIPTION 27-HHPD REF. NNO. HSD REF NNO.

QUANTITY PART NNO. WT. PART NNO. WT.

BODY ASSY. COMPLETE 1 32-653 990. 3653 32-637 900. 3637

LESS ROLLER ASSY.

HOLDDOWN BOLT w/ 4 32-501 7.00 13501 32-501 7.00 13501

LOCKSCREW & WASHER

HOLDDOWN BOLT 4 32-500 .23 50110-8-S 32-500 .23 50110-8-S

LOCKSCREW

HOLDDOWN BOLT 4 32-510 .08 511110 32-510 .08 51110

LOCKWASHER

HOLDDOWN NUT 4 32-208 1.75 1208 32-208 1.75 1208

LOCKWASHER 4 32-924 .25 50924 32-924 .25 50924

DRIVE PIN 4 32-605 10.00 1605 N/A

DRIVE PIN WASHER 4 32-506 1.00 1506 N/A

WRENCH 1 32-210 8.00 1210 32-210 8.00 1210

WIPER RETAINER RING 1 32-321 3.50 1321 SAME

SCREWS FOR RING 8 32-008 .16 50008-10-S SAME

LOCK ASSY. CONSISTS OF 32-695 3695 *SPARES

RETAINING RING 2 32-017 1017

DRIVE PIN WASHER 2 32-506 1506

ECCEN. PIN, HPD LOCK 2 32-696 3696 2

DRIVE PIN, HPD LOCK 2 32-697 3697

LOCK, HPD 2 32-698 3698 2

* RECOMMENDED SPARES FOR ONE YEAR OPERATION

ROLLER ASSEMBLY PARTS, FOR “27-HPD” & “HSD” KELLY BUSHINGSDESCRIPTION AOT ## *SPARES QTY. WEIGHT REF. NNO.

ROLLER BEARING 32-312 4 4 7.00 1312

SLEEVE BEARING 32-326 4 4 2.00 1326

ROLLER PIN w/LUBE

FITTING 32-609 4 4 31.50 3609

THRUST WASHER w/

O-RINGS 32-618 8 8 5.00 3618

DRIVE LOCK PIN f/

THRUSTWASHER 32-613 8 .25 3613

TEMPLATE 32-615 1 .50 3615

LOCK PIN f/

THRUSTWASHER 32-138 8 .20 19138

ID, O-RING

THRUSTWASHER 32-233 16 16 .50 51300-233-B

OD, O-RING

THRUSTWASHER 32-255 16 16 1.50 51300-255-B

*RECOMMENDED SPARES FOR ONE YEAR OPERATION

65rev 805

AOT TYPE STABBING GUIDE

The Access Rubber Stabbing Guides allow for quicker, easier stabbing and adds protection from stabbing damage. The self-adjusting latchholds the stabbing guide in place on both new and worn box O.D.’s.

The spring-loaded lever, when triggered, releases the guide for quick removal after stabbing.

STABBING GUIDE COMPLETE

AOT ## O.D. SSIZE // WEIGHT PPER FFT. WT.CONNECTION TTHREAD TTYPE

02-101 3/4” / CS® 1.2# - 1.5# 5.0002-102 1” / CS® 2.25# 4.5002-103 1 1/4” / CS® 3.02# - 3.24# 5.5002-104 1 1/2” / CS® 3.64# 5.5002-105 2 1/16” / CS® 3.25# 6.5002-106 2 3/8” / CS® 4.70# 6.0002-107 2 3/8” / PH-6™ 5.95# 6.0002-108 2 7/8” / CS® 6.5# 7.0002-109 2 7/8” / PH-6™ 7.9# 6.5002-110 2 7/8” / PH-6™ 8.7# (small body) 6.5002-111 2 7/8” / PH-6™ 8.7# (large body) 11.0002-112 2 7/8” / 8RD 6.5# (small body) 6.5002-113 2 7/8” / 8RD 6.5# (large body) 10.5002-114 3 1/2” / CS® 9.3# - 10.3# 10.0002-115 3 1/2” / PH-6™ 12.95# 9.5002-116 3 1/2” / IF 4 3/4” (small body) 9.5002-117 3 1/2” / IF 4 3/4” (large body) 12.0002-118 4 1/2” / CS® 12.75# 12.0002-119 4 1/2” / PH-6™ 15.50# 12.0002-143 4 1/2” / XH 6 1/4” 14.0002-144 4 1/2” / IF 6 1/2” 14.0002-145 5” / PH-6™ 20.3# 14.0002-146 5 1/2” / PH-6™ 23# 14.00

OTHER SIZES AND TYPES OF CONNECTIONS ARE IN STOCK AND AVAILABLE UPON REQUEST.THERE IS NO CHARGE FOR LABOR ON REPAIRS WHEN USING OUR REPLACEMENT PARTS.

CS is a Registered Trademark of Hydril Company. PH-6 is a Trademark of Hydril Company.



REPLACEMENT PARTS FOR STABBING GUIDE

RUBBER BODIES ONLY

AOT ## O.D. SSIZE WEIGHT PPER FFT. WT.CONNECTION / TTHREAD TTYPE

02-120 3/4” / CS® 1.2# - 1.5# 1.0002-121 1” / CS® 2.25# 1.0002-122 1 1/4” / CS® 3.02# - 3.24# 1.5002-123 1 1/2” / CS® 3.64# 1.5002-124 2 1/16” / CS® 3.25# 3.0002-125 2 3/8” / CS® 4.70# 2.5002-126 2 3/8” / PH-6™ 5.95# 2.5002-127 2 7/8” / CS® 6.5# 3.0002-128 2 7/8” / PH-6™ 7.9# 2.5002-129 2 7/8” / PH-6™ 8.7# (small body) 2.5002-130 2 7/8” / PH-6™ 8.7# (large body) 6.0002-131 2 7/8” / 8RD 6.5# (small body) 2.5002-132 2 7/8” / 8RD 6.5# (large body) 5.50 02-133 3 1/2” / CS® 9.3# - 10.3# 5.5002-134 3 1/2” / PH-6™ 12.95# 4.5002-135 3 1/2” / IF 4 3/4” (small body) 4.0002-136 3 1/2” / IF 4 3/4” (large body) 7.50 02-137 4 1/2” / CS® 12.75# 7.50 02-138 4 1/2” / PH-6™ 15.50# 7.50 02-139 4 1/2” / XH 6 1/4” 9.00 02-140 4 1/2” / IF 6 1/2” 9.00 02-141 5” / PH-6™ 20.3# 9.00 02-142 5 1/2” / PH-6™ 23# 9.00

REPLACEMENT PARTS FOR STABBING GUIDES

AOT ## ITEM DESCRIPTION WT.02-150 2 BEARING .0502-151 3 SPRING .1002-152 4 HINGE .5002-153 5 CATCH .4502-154 6 LATCH .1202-155 7 HINGE PIN .1302-156 8 GUIDE PIN .0502-157 9 CAP SCREW (8) .1102-158 10 HANDLE 2.00

CS is a Registered Trademark of Hydril Company. PH-6 is a Trademark of Hydril Company.

67rev 805

AOT CASING SCRAPERS

AOT ## CASING CONN. CASING BLADE DDIAMETER SSCRAPERO.D. SIZE WEIGHT CCOLLAPSED EEXTENDED WWEIGHT

10-085 2 7/8” 1 13/16” WFJ 6.5 2.347 2.597 26#10-085-1 3 1/2” 1 13/16” WFJ 9.3 2.797 3.047 24#10-087 4” 2 3/8” REG. 11.34 3.303 3.678 50#10-087-1 4 1/2” 2 3/8” REG. 9.5 -13.5 3.795 4.090 51#10-110-1 4 1/2” & 5” 23# 2 3/8” REG. 9.5 - 13.5 3.795 4.280 70#10-110-2 5” 2 3/8” REG. 11.5 - 18 4.151 4.636 72#10-113 5 1/2” 2 7/8” REG. 13 - 23 4.545 5.233 97#10-113-4 5 3/4” 2 7/8” REG. 14 - 23 4.960 5.648 98#10-117-3 6 5/8” 3 1/2” REG. 17 - 32 5.550 6.293 150#10-117 7” 3 1/2” REG. 17 - 38 5.795 6.538 152#10-117-1 7 5/8” 3 1/2” REG. 20 - 39 6.500 7.243 158#10-117-4 8 5/8” 3 1/2” REG. 24 - 49 7.386 8.129 162#10-123-2 9 5/8” 4 1/2” REG. 29.3 - 53.3 8.379 9.254 354#10-123-3 10 3/4” 4 1/2” REG. 32.75 - 55.5 9.604 10.479 360#10-123-5 11 3/4” 4 1/2” REG. 38 - 60 10.616 11.491 375#10-123-6 13 3/8” 4 1/2” REG. 48 - 72 12-191 13.066 405#10-127-2 10 3/4” 6 5/8” REG. 32.75-55.5 9.604 10.479 480#10-127-3 11 3/4” 6 5/8” REG. 38 - 60 10.616 11.491 495#10-127 13 3/8” 6 5/8” REG. 48 - 72 12.191 13.066 545#10-128 16” 7 5/8” REG. 65 - 109 14.500 15.697 1100#

10-128-1 20” 7 5/8” REG. 94 - 169 18.188 19.415 1200#



SCRAPER BLADES

AOT ## FOR SSCRAPER SIZE CSG. WWT. WT. PPER SSET10-135 10-085 2 7/8” 6.5# 6.0010-137 10-085-1 3 1/2” 9.3# 6.7010-137-1 10-087 4” 11.34# 6.9510-137-2 10-087-1 4 1/2” 9.5# - 13.5# 7.4510-140 10-110-1 4 1/2” & 5” 23# 9.5# - 13.5# 11.0010-141 10-110-2 5” 11.5# - 18# 14.0010-143 10-113 5 1/2” 13# - 23# 15.0010-145 10-113-4 5 3/4” 14# - 23# 16.0010-146 10-117-3 6 5/8” 17# - 32# 23.0010-147 10-117 7” 17# - 38# 24.0010-148 10-117-1 7 5/8” 20# - 39# 34.0010-149 10-117-4 8 5/8” 24# - 49# 46.0010-153 10-123-2 9 5/8” 29.3# - 53.3# 78.0010-154 10-123-3 10 3/4” 32.75# - 55.5# 90.0010-155 10-123-5 11 3/4” 38# - 60# 93.0010-156 10-123-6 13 3/8” 48# - 72# 110.0010-157-2 10-127-2 10 3/4” 32.75# - 55.5# 110.0010-157-3 10-127-3 11 3/4” 38# - 60# 130.0010-157 10-127 13 3/8” 48# - 72# 160.0010-157-4 N/A 16” 65# - 109# 195.0010-158 10-128 16” 65# - 109# 180.00 10-159 10-128-1 20” 94# - 169# 210.00

CENTER RING ASSEMBLIES

AOT ## SCRAPER BBODY WT.10-163 10-085 2 7/8” & 3 1/2” 1.7510-164 10-087 4” & 4 1/2” 2.0010-165 10-110 4 1/2” & 5” 3.0010-166 10-113 5 1/2” & 5 3/4” 4.0010-167 10-117 6 5/8” - 8 5/8” 7.0010-168 10-123 9 5/8” -11 3/4” 21.0010-169 10-127 10 3/4” - 13 3/8” 30.0010-170 10-128 16” & 20” 55.00

SPRINGS

AOT ## SCRAPER BBODY QTY. WT.10-180 10-085 2 7/8” - 3 1/2” 6 .12510-181 10-087 4” & 4 1/2” 18 .12510-175 10-110 - 10-127 30 .12510-176 10-127 - 10-128 10 3/4”- 20” 40 .165

SCREWS

AOT ## SCRAPER BBODY QTY. WT.10-183 10-085 2 7/8” - 3 1/2” 4 .12010-184 10-087 4” - 4 1/2” 4 .12010-185 10-110 4 1/2” 4 .13010-186 10-113 - 10-117 4 .14510-187 10-123 - 10-127 4 .16510-188 10-128 16” - 20” 4 .200

69rev 805

TERMS & CONDITIONS

QUOTATIONS - All quotations are F.O.B. Company’s point of manufacturing origin, unless otherwise expresslystipulated. Quotations are for immediate order unless a period of time for acceptance is otherwise stated. Lighterage,wharfage or landing charges, dues, duties or any other charges at destination are not included in quotations orindicated by list prices unless specifically stipulated.

List price and discounts on all products are subject to change without notice. Prices in effect at time of shipment ordelivery whether higher or lower, will prevail.

TERMS OF PAYMENT - Unless otherwise specifically stated on the invoice, terms of payment are NET THIRTY DAYSfollowing the date of the invoice, subject to approved credit. Payment to be made in U.S. dollars. Boxing, cartage,freight, insurance and handling are always net. Interest at the maximum rate allowable by applicable law may becharged on past due accounts. Access Oil Tools, Inc. (A.O.T., Inc.) reserves the right to revoke credit and suspenddelivery if customer fails to make payment of an invoice when due.

DELIVERY - Our responsibility ceases upon delivery to any common carrier, and we do not, unless previouslyinstructed, insure shipments beyond the point of delivery to such carrier.

We make every effort to ship all materials within the time promised by us, but we do not guarantee to do so, and allsuch promises are subject to delays occasioned by causes beyond reasonable control.

INSURANCE - We will place insurance as nearly as possible in accordance with our customer’s written instructions,but do so solely on behalf of our customers and assume no liability for placing, effectiveness or otherwise in connectionwith such insurance, or in case of breakage, damage or loss.

SHIPPING WEIGHT - All weights listed are approximate net weight only, unless otherwise specified, and do not includeboxing. For approximate gross weight add 10% to net weight.

CANCELLATIONS AND RETURNS - Orders for equipment of special design, size or materials are not subject tocancellation and all other orders are subject to a cancellation charge after having been accepted by the prescribedCompany office or authority. Equipment altered or made to customers specifications is subject to special prices andconditions.

WARRANTY - A.O.T., Inc. warrants goods of our manufacture for twelve (12) months after date of shipment to be freefrom any defects in material and workmanship under normal use and service when installed, used and serviced in themanner provided and intended by A.O.T., Inc.. A.O.T.’s obligation under this warranty is limited to repair, orreplacement, at it’s option, if any products manufactured by. A.O.T., Inc. are returned F.O.B. our plant and which wedetermine to be defective.

Under no circumstances shall A.O.T., Inc. be liable for any consequential, special, incidental, punitive or other damagesresulting from or caused by any defective materials, products or supplies, no charge for labor, transportation or otherexpense involved, to either repair allegedly defective goods outside our plant, or any other charge be allowed.

THIS IS THE SOLE WARRANTY OF A.O.T., INC. AND NO OTHER WARRANTY IS APPLICABLE, EITHEREXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY AS TO THE MERCHANTABILITY OR FITNESS FOR

PARTICULAR USE OR PURPOSE.



CERTIFICATION

Complete data books, including material certification and testdocumentation, are available on all equipment manufactured by AOT.

PULL & LOAD TESTING

All AOT Elevators, Spiders, and Tongs are pull tested prior to shipment.Load test certificates are supplied with each.

INTERCHANGEABILITY

All AOT Elevators, Slips, Tongs, Spiders, Safety Clamps, Kelly Bushings, &Valves are interchangeable with other corresponding designs.

INVENTORY

We strive to maintain a full inventory of complete assemblies andreplacement parts. Most orders can be shipped from stock.

QUALITY CONTROL - CERTIFICATIONS

AOT is licensed under API SPECS. 7K & 8C and is also ISO 9002 certified.






DRILL PIPE & CASING TONGSPRODUCT CATALOG

Type C, B, HT-65 & HT-100 Tongs

jbreaux

Placed Image


Drill Pipe Tongs are the latest addition tothe product line of Access Oil Tools and aremanufactured at its 42,000 sq. ft. plantlocated in Broussard, Louisiana

Access was founded in 1985 byprofessionals with years of experience in oilfield sales and manufacturing. We recognizedthe need for a reliable source of qualityequipment to meet the rigorous demands ofthis industry. Our company has grownsteadily over the years and today is a leadingsupplier of pipe handling equipment to thedrilling industry worldwide.

• Licensed under API Spec. Q1, 7K, 8A and 8C

• ISO 9001; 2000 Certified• All Tongs Pull Tested and Full

Certification Available

In addition to the Drill Pipe Tongs detailed inthis catalog, Access offers a completerange of manual and proprietary poweredhandling tools. Manual tools includeElevators, Slips, Safety Clamps, Spiders,Bushings, Casing Scrapers and StabbingGuides.

The powered tools cover Kelly Spinners,Rotating Mousehole Tool, The “TwisterTorque” wrenching tool and the “TwisterSpin” which incorporates the TwisterTorque tool and a Drill Pipe Spinner.

This detailed parts catalog can be found onthe Access web page and can bedownloaded in PDF file format.

Web address: www.accessoiltools.com

DRILL PIPE & CASING TONGS

TYPE TORQUE RATING (ft.lbs.) SIZE RANGE

C 35,000 2 3/8” – 10 3/4”

B 30,000 13 3/8”

40,000 9” – 11 3/4”

55,000 3 1/2” – 9”

B Extended Head 25,000 13 3/8” – 25 1/2”(for Casing)

HT-65 40,000 11 3/4” – 17”

65,000 3 1/2” – 11 1/4”

HT-100 60,000 16” – 17”

75,000 12” – 15”

100,000 4” – 12” and 15 3/4”

TORQUE RATINGS


ITEM Page

“C” Type Tong Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Hinge & Lug Jaw Assemblies for “C” Tong . . . . . . . . . . . . . .5Replacement Parts for “C” Tong . . . . . . . . . . . . . . . . . . . . . .5

“B” Type Tong Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Lug Jaw Assemblies for “B” Tong . . . . . . . . . . . . . . . . . . . . .7Replacement Parts for “B” Tong . . . . . . . . . . . . . . . . . . . . . .7

“HT–65” Type Tong Complete . . . . . . . . . . . . . . . . . . . . . . . . .8Lug Jaw Assemblies for “HT–65” Tong . . . . . . . . . . . . . . . . .9Replacement Parts for “HT–65” Tong . . . . . . . . . . . . . . . . . .9

“HT–100” Type Tong Complete . . . . . . . . . . . . . . . . . . . . . . .10Lug Jaw Assemblies for “HT–100” Tong . . . . . . . . . . . . . . .11Replacement Parts for “HT–100” Tong . . . . . . . . . . . . . . . .11

TABLE OF CONTENTS

AOT TYPE “C” TONG COMPLETE

AOT # DESCRIPTION WT.

T30117-2 TYPE “C” TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS (2 3/8” – 7”) 250.00 T30117-3 TYPE “C” TONG COMPLETE W/SHORT LEVER LESS LUG JAWS (2 3/8” – 7”) 232.00 T30117 TYPE “C” TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS (7 5/8” – 10 3/4”) 250.00 T30117-1 TYPE “C” TONG COMPLETE W/SHORT LEVER LESS LUG JAWS (7 5/8” – 10 3/4”) 232.00

NOTE: ADD - ST TO END OF TONG P/N FOR TONG WITH

SAFETY HANDLES & SET-BACK HANGER


HINGE AND LUG JAW ASSEMBLIES FOR TYPE “C” TONG AOT # ITEM DESCRIPTION TORQUE RATING WT.

T30728-1 34 2 3/8 — 3.668 LUG JAW ASSEMBLY 35,000 ft. lbs. 33.00 T30727-1 34 2 7/8 — 4 1/4 LUG JAW ASSEMBLY 35,000 ft. lbs. 34.00 T11939-4 34 3 1/2 — 5 1/4 LUG JAW ASSEMBLY 35,000 ft. lbs 37.00 T11940-2 34 5 1/4 — 7 LUG JAW ASSEMBLY 35,000 ft. lbs 49.00 T11941-1 N/P 35,000 ft. lbs. 61.00 T11941-2 N/P 7 — 8 5/8 LUG JAW 35,000 ft. lbs 30.00 T11942-1 N/P 35,000 ft. lbs. 28.00 T13799-1 N/P 9 5/8 — 10 3/4 HINGE & LUG JAW ASSEMBLY 35,000 ft. lbs. 76.00 T13799 N/P 9 5/8 — 10 3/4 LUG JAW 35,000 ft. lbs. 39.00 T13798-1 N/P 9 5/8 — 10 3/4 HINGE JAW ASSEMBLY (ONLY) 35,000 ft. lbs. 36.00

*Lug Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings

REPLACEMENT PARTS FOR TYPE “C” TONG AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT. T11516-2 1-7 STANDARD LEVER ASSY. F/TYPE C TONG 1 87.00 T11516 1 STANDARD LEVER ONLY F/TYPE C TONG 1 78.00 T11883-1 1-7 SHORT LEVER ASSY. F/TYPE C TONG 1 63.00 T11883 1 SHORT LEVER ONLY F/TYPE C TONG 1 54.00 T939099-108 2 SAFETY LINE BOLT 1 1 1.00 T50516-C 3 SAFETY LINE BOLT NUT 1 1 .25 T51402-14 4 COTTER PIN 2 1 .10 T26119-1 5 NAME PLATE 1 .10 T53301-4-3 6 NAME PLATE SCREWS 4 .05 T53201 7 GREASE FITTING 2 .05 T11517 8 TONG LINE PIN F/TYPE C TONG 1 1 4.00 T25468 9 TONG LINE PIN RETAINER 2 1 1.00 T13264-1 10-17 HANGER ASSY. F/TYPE C TONG 1 36.25 T13264 10 HANGER ONLY F/TYPE C TONG 1 25.80 T13264-1-SH 10-17 SET BACK HANGER ASSY. F/TYPE C TONG 1 44.00 T13264-SH 10 SET BACK HANGER ONLY F/TYPE C TONG 1 33.55 T12586 11 BALANCING SCREW 1 2.75 T939099-596 12 BALANCING SCREW BOLT 1 2.10 T939484-8 13 BALANCING SCREW BOLT NUT 1 .40 T51402-10 14 COTTER PIN 1 .08 T12863 15 SUSPENSION RING 1 1.50 T939168-133 16 HANGER ADJUSTMENT SCREW 1 .75 T939248-8 17 HANGER JAM NUT 2 .25 T30329 18-20 HANGER BOLT ASSY. 1 1 1.50 T939097-516 18 HANGER BOLT 1 1.40 T940985-8 19 HANGER BOLT NUT 1 .25 T51402-10 20 COTTER PIN 1 .05 T11511-1 21-24,7 LONG JAW ASSY. F/TYPE C TONG 1 64.00 T11511 21 LONG JAW F/TYPE C TONG 1 63.00 T16401-2 22 1/2 X 1 1/4 X 5 TONG DIE 144 AS REQ. .55 T17194 23 TONG DIE RETAINER PIN 24 AS REQ. .03 T51402-6 24 COTTER PIN 36 AS REQ. .01 T11522 25 HINGE PIN NUT 4 4 .35 T51506-8 33 GROOVE PIN F/HINGE PIN NUT 8 8 .05 T11521-1 26 THREADED HINGE PIN 4 4 2.65 T11513-5 27, 22-24 SHORT JAW ASSY. (2 3/8 — 7 ) 1 31.75 T11513-1 27, 22-24 SHORT JAW ASSY. (7 5/8 — 10 3/4 ) 1 31.75 T11933-1 28,25, & 33 LATCH ASSY. 1 1 17.25 T9561 29 LATCH SPRING 12 2 .10 T11523 30 LEVER HINGE PIN BLOCK 1 3 2.65 T11199 31 DOWELL PIN 4 4 .05 T51402-6 32 COTTER PIN 4 4 .01 T11520-1 NP REMOVABLE HINGE PIN NA 2.75 T20000-SH-2 35 SAFETY HANDLE KIT (fits all AOT tongs) 3 3 3.25

5 www.accessoiltools.com

AOT TYPE “B” TONG COMPLETE AOT # DESCRIPTION WT.

T30114 TYPE B TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS 395.00 T30114-1 TYPE B TONG COMPLETE W/SHORT LEVER LESS LUG JAWS 386.00

NOTE: ADD —ST TO END OF TONG P/N FOR TONG WITH SAFETY HANDLES & SET-BACK HANGER


LUG JAW ASSEMBLIES FOR TYPE “B” TONG

AOT # ITEM # DESCRIPTION TORQUE RATING WT. T11765-1 41 3 1/2 - 5 LUG JAW ASSEMBLY 55,000 ft. lbs. 30.00 T11196-3 41 4 1/4 - 6 3/4 LUG JAW ASSEMBLY 55,000 ft. lbs. 42.00 T11196-2 41 6 5/8 — 9 LUG JAW ASSEMBLY 55,000 ft. lbs. 53.00 T11297-1 41 9 — 10 3/4 LUG JAW ASSEMBLY 40,000 ft. lbs. 60.00 T13285-1 41 11 3/4 LUG JAW ASSEMBLY 40,000 ft. lbs. 61.00 T24592-3 41 12 3/4 — 13 LUG JAW ASSEMBLY 30,000 ft. lbs. 65.00 T24592-1 41 13 3/8 LUG JAW ASSEMBLY 30,000 ft. lbs. 28.00

*Lug Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings

REPLACEMENT PARTS FOR TYPE “B” TONG AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.

T12434-2 1-4 STANDARD LEVER ASSY. F/TYPE B TONG 1 133.00 T12434 1 STANDARD LEVER ONLY F/TYPE B TONG 1 124.00 T9568-1 1-4 SHORT LEVER ASSY. F/TYPE B TONG 1 124.00 T9568 1-4 SHORT LEVER ONLY F/TYPE B TONG 1 113.00 T2005682 2 NAME PLATE 1 .10 T53301-4-3 3 NAME PLATE SCREWS 4 .05 T53201 4 GREASE FITTING 2 .05 T9574 5 TONG LINE PIN F/TYPE B TONG 1 1 6.00 T25468 6 TONG LINE PIN RETAINER 2 1 1.00 T26782 7-14 HANGER ASSY. F/TYPE B TONG 1 56.00 T26783 7 HANGER ONLY F/TYPE B TONG 1 47.00 T26782-SH 7-14 SET BACK HANGER ASSY. F/TYPE B TONG 1 64.00 T26783-SH 7 SET BACK HANGER ONLY F/TYPE B TONG 1 55.00 T12586 8 BALANCING SCREW 1 2.75 T939099-596 9 BALANCING SCREW BOLT 1 2.10 T939484-8 10 BALANCING SCREW BOLT NUT 1 .40 T51402-14 11 COTTER PIN 1 .08 T12863 12 SUSPENSION RING 1 1.50 T939168-133 13 HANGER ADJUSTMENT SCREW 1 .75 T939248-8 14 HANGER JAM NUT 2 .25 T939097-556 15 HANGER BOLT 1 1 1.40 T940985-8 16 HANGER BOLT NUT 1 1 .25 T51402-16 17 COTTER PIN 1 1 .05 T11194-1 18-30 LONG JAW ASSY. F/TYPE B TONG 1 98.00 T11194 18 LONG JAW F/TYPE B TONG 1 95.00 T11139 19 ADJUSTABLE STOP 1 .75 T11144 20 ADJUSTABLE STOP PLUNGER 1 .15 T11192 21 ADJUSTABLE STOP SPRING 1 .15 T11191 22 ADJUSTABLE STOP BOLT 1 .55 T8150 23 ADJUSTABLE STOP BOLT NUT 1 .20 T51402-14 24 COTTER PIN AS REQ. .03 T11228 25 BOOSTER PLUNGER 1 .25 T11229 26 BOOSTER PLUNGER SPRING 1 .25 T940968-6 27 BOOSTER PLUNGER RETAINER PLUG 1 .25 T16402-2 28 1/2 X 1 1/4 X 5 7/8 TONG DIE 144 AS REQ. .75 T17194 29 TONG DIE RETAINER PIN 32 AS REQ. .03 T51402-6 30 COTTER PIN 32 AS REQ. .01 T11142 31 HINGE PIN NUT 5 5 .35 T51506-8 40 GROOVE PIN F/HINGE PIN NUT 10 10 .05 T11197-1 32,28-30 SHORT JAW ASSY. 1 44.00 T11971 32 SHORT JAW ONLY 1 41.00 T11195-2 33, 28-30,4 LATCH JAW ASSY. 1 37.00 T11195 33 LATCH JAW ONLY 1 34.00 T11138-1 34, 31, & 40 LATCH ASSY. 1 1 28.00 T9561 35 LATCH SPRING 12 2 .10 T9572 36 LEVER HINGE PIN BLOCK 1 1 1.75 T11141 37 THREADED HINGE PIN 5 5 4.75 T11199 38 DOWELL PIN 5 5 .05 T51402-6 39 COTTER PIN 5 5 .01 T11140 NP REMOVABLE HINGE PIN NA 4.20 T20000-SH-2 42 SAFETY HANDLE KIT (fits all AOT tongs) 3 3 3.25


AOT TYPE “HT-65” TONG COMPLETE AOT # DESCRIPTION WT.

T200540 TYPE HT-65 TONG COMPLETE LESS LUG JAWS 440.00 NOTE: ADD —ST TO END OF TONG P/N FOR TONG WITH


12

14

10

11

915

16

16

6

8

5

17

31

23

20

21

34

2120

31

28

19 19

3220

212120

24

21

1

31

19

21

20

4

4

12

19

20

4

4

4

4

27

2021

21

20

18

32

25

7

13

32

3333

33 26

13

32

32

33

30

29

22

31

36

3535

35

35

T24529-TLBTONG LINE BLOCK


HINGE & LUG JAW ASSEMBLIES FOR TYPE “HT-65” TONG AOT # ITEM # DESCRIPTION TORQUE RATING WT. T200546-1 34 3 1/2 - 8 1/4 LUG JAW ASSEMBLY 65,000 ft. lbs. 82.00 T200547-1 34 8 — 11 1/4 LUG JAW ASSEMBLY 65,000 ft. lbs. 97.00 T200548 34 11 3/4 — 14 3/8 LUG JAW ASSEMBLY 40,000 ft. lbs. 71.00 T200549 34 16 - 17 LUG JAW ASSEMBLY 40,000 ft. lbs. 83.00 T200545-1 NP 11 3/4 — 17 HINGE JAW ASSEMBLY 40,000 ft. lbs. 56.00

*Lug & Hinge Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings ** Hinge Jaw Assembly required for sizes greater than 11 1/4

REPLACEMENT PARTS FOR TYPE “HT-65” TONG

AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.

T200541-1 1-8 LEVER ASSY. F/TYPE HT-65 TONG 1 139.00 T200541 1 STANDARD LEVER ONLY F/TYPE HT-65 TONG 1 134.00 T200551 2 NAME PLATE 1 .10 T53301-4-3 3 NAME PLATE SCREWS 4 .05 T53201 4 GREASE FITTING 2 .05 T24529 5 TONG LINE RETAINER 1 1 3.65 T24249 6 TONG LINE RETAINER BOLT 1 1 1.08 T50809-N-C 7 WASHER F/RETAINER BOLT 1 1 .05 T51402-8 8 COTTER PIN 1 1 .04 T200668-2 9-16 HANGER ASSY. F/TYPE HT-65 TONG 1 56.00 T200668 9 HANGER ONLY F/TYPE HT-65 TONG 1 47.00 T200668-2-SH 9-16 SET BACK HANGER ASSY. F/TYPE HT-65 TONG 1 64.00 T200668-SH 9 HANGER ONLY F/TYPE HT-65 TONG 1 55.00 T12586 10 BALANCING SCREW 1 2.75 T939099-596 11 BALANCING SCREW BOLT 1 2.10 T50512-C 12 BALANCING SCREW BOLT NUT 1 .40 T51402-16 13 COTTER PIN 1 .08 T12863 14 SUSPENSION RING 1 1.50 T939168-133 15 HANGER ADJUSTMENT SCREW 1 .75 T50314-C 16 HANGER JAM NUT 2 .25 T939099-556 17 HANGER BOLT 1 1 1.40 T50512-C 12 HANGER BOLT NUT 1 1 .25 T51402-16 13 COTTER PIN 1 1 .05 T200542-1 18-21 LONG JAW ASSY. F/TYPE HT-65 TONG 1 118.00 T200542 18 LONG JAW F/TYPE HT-65 TONG 1 111.00 T16402-2 19 1/2 X 1 1/4 X 5 7/8 TONG DIE 144 AS REQ. .75 T17194 20 TONG DIE RETAINER PIN 24 AS REQ. .03 T51402-6 21 COTTER PIN 36 AS REQ. .01 T200543-1 22-26, 19-21 SHORT JAW ASSY. F/TYPE HT-65 TONG 1 51.00 T200543 22 SHORT JAW ONLY F/TYPE HT-65 TONG 1 47.00 T25864 23 SHORT HANDLE JAW 1 2.75 T50012-52-C8 24 BOLT 1 .75 T50212-C 25 NUT 1 .35 T50912-C 26 LOCKWASHER 1 .04 T200544-1 27-29, 4 LATCH ASSY. 1 1 36.00 T200544 27 LATCH 1 34.00 T24526 28 LATCH SPING PLUNGER 1 1.75 T24530 29 PLUNGER PIN 1 .25 T24525 30 LATCH SPRING 12 1 .50 T200550 31 HINGE PIN 4,5 4,5 5.00 T24528 32 HINGE PIN NUT 4,5 4,5 .75 T51405-20 33 COTTER PIN 4,5 4,5 .03 T2000-SH-2 35 SAFETY HANDLE KIT (fits all AOT tongs) 4 4 3.25 T24529-TLB-MU 36 TONG LINE BLOCK, MAKE-UP (Right Hand) A/R 31.00 T24529-TLB-BO 36 TONG LINE BLOCK, BREAK OUT (Left Hand) A/R 31.00

*RECOMMENDED SPARE PARTS FOR 1 YEAR


AOT TYPE “HT-100” TONG COMPLETE AOT # DESCRIPTION WT.

T200071 TYPE HT-100 TONG COMPLETE LESS LUG JAWS 533.00 NOTE: ADD —ST TO END OF TONG P/N FOR TONG WITH


12

14

10

11

915

16

16

6

5

17

32

23

33

33

20

21

35

2120

29 31

19 19

3320

212120

24

21

1

32

19

21

20

4

4

12

19

20

4

4

4

4

28

30

32

2021

21

20

18

33

26

7

13

32

34

34 34 27

13

8

25

32 22

2334

37

36

36

36 36

T24529-TLBTONG LINE BLOCK


HINGE & LUG JAW ASSEMBLIES FOR TYPE “HT-100” TONG

AOT # ITEM # DESCRIPTION TORQUE RATING WT. T200663-1 35 4 - 8 1/2 LUG JAW ASSEMBLY 100,000 ft. lbs. 135.00 T200664 35 8 1/2 — 12 LUG JAW ASSEMBLY 100,000 ft. lbs. 102.00 T200665 35 12 — 15 LUG JAW ASSEMBLY 75,000 ft. lbs. 140.00 T200666 35 15 3/4 LUG JAW ASSEMBLY 100,000 ft. lbs. 162.00 T200667 35 16 — 17 LUG JAW ASSEMBLY 60,000 ft. lbs. 140.00 T200662-1 NP 8 1/2 — 17 HINGE JAW ASSEMBLY 100,000 ft. lbs. 112.00

*Lug & Hinge Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings ** Hinge Jaw Assembly required for sizes greater than 8 1/2

REPLACEMENT PARTS FOR TYPE “HT-100” TONG AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.

T200661-1 1-8 LEVER ASSY. F/TYPE HT-100 TONG 1 191.00 T200661 1 STANDARD LEVER ONLY F/TYPE HT-100 TONG 1 186.00 T200669 2 NAME PLATE 1 .10 T53301-4-3 3 NAME PLATE SCREWS 4 .05 T53201 4 GREASE FITTING 2 .05 T24529 5 TONG LINE RETAINER 1 1 3.65 T24249 6 TONG LINE RETAINER BOLT 1 1 1.08 T50809-N-C 7 WASHER F/RETAINER BOLT 1 1 .05 T51402-8 8 COTTER PIN 1 1 .04 T200668-2 9-16 HANGER ASSY. F/ HT-100 & HT-65 TONG 1 56.00 T200668 9 HANGER ONLY F/ HT-100 & HT-65 TONG 1 47.00 T200668-2-SH 9-16 SET BACK HANGER ASSY. F/ HT-100 & HT-65 TONG 1 64.00 T200668-SH 9 SET BACK HANGER ONLY F/ HT-100 & HT-65 TONG 1 55.00 T12586 10 BALANCING SCREW 1 2.75 T939099-596 11 BALANCING SCREW BOLT 1 2.10 T50512-C 12 BALANCING SCREW BOLT NUT 1 .40 T51402-16 13 COTTER PIN 1 .08 T12863 14 SUSPENSION RING 1 1.50 T939168-133 15 HANGER ADJUSTMENT SCREW 1 .75 T50314-C 16 HANGER JAM NUT 2 .25 T939099-556 17 HANGER BOLT 1 1 1.40 T50512-C 12 HANGER BOLT NUT 1 1 .25 T51402-16 13 COTTER PIN 1 1 .05 T200072-1 18-23 LONG JAW ASSY. F/TYPE HT-100 TONG 1 140.00 T200072 18 LONG JAW F/TYPE HT-100 TONG 1 128.00 T16401-2 19 1/2 X 1 1/4 X 5 TONG DIE 144 AS REQ. .75 T17194 20 TONG DIE RETAINER PIN 24 AS REQ. .03 T51402-6 21 COTTER PIN 36 AS REQ. .01 T50012-52-C8 22 BOLT F/LONG JAW 1 1.75 T50212-C 23 NUT 1 .30 T200074-1 24-27, 19-21 SHORT JAW ASSY. F/TYPE HT-100 TONG 1 87.00 T200074 24 SHORT JAW ONLY F/TYPE HT-100 TONG 1 77.00 T939107-516 25 BOLT 1 .75 T50214-C 26 NUT 1 .35 T50912-C 27 LOCKWASHER 1 .04 T200073-1 28-30,4 LATCH ASSY. 1 1 47.00 T200073 28 LATCH 1 43.00 T24526 29 LATCH SPRING PLUNGER 1 1.75 T24530 30 PLUNGER PIN 1 .25 T24525 31 LATCH SPRING 12 1 .50 T200204 32 HINGE PIN 4,5 4,5 5.00 T24528 33 HINGE PIN NUT 4,5 4,5 .75 T51405-20 34 COTTER PIN 4,5 4,5 .03 T20000-SH-2 36 SAFETY HANDLE KIT (fits all AOT tongs) 3 3 3.25 T24529-TLB-MU 37 TONG LINE BLOCK, MAKE-UP (Right Hand) A/R 31.00 T24529-TLB-BO 37 TONG LINE BLOCK, BREAK OUT (Left Hand) A/R 31.00

**RECOMMENDED SPARE PARTS FOR 1 YEAR


Reliable. Dependable. Accessible.

CORPORATE OFFICE3711 Melancon RoadBroussard, LA 70518Phone (337) 367-5044Fax (337) 367-5047


Visit our website at www.accessoiltools.com

jbreaux

Placed Image

OFFSHORECONTAINER FLEET FERGUSON SEACABS

PRODUCT CATALOGUE

HALF HEIGHT CONTAINERS Code: 90000286

TYPE 3M HALF HEIGHT 4.5M HALF HEIGHT 6M HALF HEIGHT 7M HALF HEIGHT 9M HALF HEIGHT

Description Removable or Swing Door Removable Door Removable Door Removable Door Removable Door

Outside Dim. 10ft x 8ft x 4ft 15ft x 8ft x 4ft 20ft x 8ft x 4ft 23ft x 8ft x 4ft 30ft x 8ft x 5ft(L x W x H) Imperial

Outside Dim. 3,080 x 2,435 x 1,385 4,572 x 2,438 x 1,436 6,058 x 2,438 x 1,436 7,010 x 2,438 x 1,436 9,200 x 2,450 x 1,545(L x W x H) Metric

Tare Weight 2,150 2,870 3,450 3,700 6,250

Payload 10,350 10,430 9,850 9,900 15,750

Max. Gross Weight 12,500 13,300 13,300 13,600 22,000

DRY GOODS CONTAINERS 3 M includes safety net Code: 90000287

TYPE 3M DRY GOODS 6M DRY GOODS 6M DRY GOODS-HIGH TOP

Description Dry Goods Container Dry Goods Container Dry Goods Container

Outside Dim. 10ft x 8ft x 8ft 20ft x 8ft x 9ft 20ft x 8ft x 11ft(L x W x H) Imperial

Outside Dim. 2,991 x 2,438 x 2,587 6,058 x 2,438 x 2,591 6,058 x 2,438 x 3,355(L x W x H) Metric

Tare Weight 2,460 5,000 5,480

Payload 7,840 10,000 9,520

Max. Gross Weight 10,300 15,000 15,000

MINI OPEN TOPCONTAINERS CONTAINERSincludes cargo safety net tarpaulins availableCode: 90000288 Code: 90000289

TYPE MINI 3M OPEN TOP 6M OPEN TOP

Description Shelved Mini Container Open Top Container Open Top Container



Tare Weight 1,850 2,400 4,750

Payload 5,250 10,000 10,000

Max. Gross Weight 7,100 12,400 14,750

OFFSHORE CONTAINER FLEET

FERGUSON SEACABS

OFFSHORE CONTAINER FLEET 1

CARGO BASKETS cargo nets availableCode: 90000291

TYPE 1.5M CARGO BASKET 2.5M CARGO BASKET 3.6M CARGO BASKET 4.8M CARGO BASKET 6.3M CARGO BASKET

Description Cargo Basket Cargo Basket Cargo Basket Cargo Basket Cargo Basket



Tare Weight 700 1,100 1,350 1,650 2,300

Payload 1,000 5,000 7,000 8,000 10,100

Max. Gross Weight 1,700 6100 8,350 9,650 12,400


TYPE 8.3M CARGO BASKET 9.3M CARGO BASKET 10.3M CARGO BASKET 12.3M CARGO BASKET 13.3M CARGO BASKET

Description Cargo Basket Cargo Basket Cargo Basket Cargo Basket Cargo Basket



Tare Weight 2,460 2,800 3,080 3,550 3,800

Payload 9,940 11,500 11,220 10,750 10,500

Max. Gross Weight 12,400 14,300 14,300 14,300 14,300


TYPE 14.3M CARGO BASKET 16.3M CARGO BASKET 18.3M CARGO BASKET

Description Cargo Basket Cargo Basket Cargo Basket



Tare Weight 4,000 4,480 5,100

Payload 10,300 9,820 10,900

Max. Gross Weight 14,300 14,300 16,000

OFFSHORE CONTAINER FLEET

2 OFFSHORE CONTAINER FLEET

DRUM DRUMBASKETS CONTAINERSCode: 90000292 Code: 90000293

TYPE 3.7M DRUM BASKET 4.2M DRUM BASKET 3.7M DRUM CONTAINER 4.2M DRUM CONTAINER

Description Drum Basket Drum Basket Drum Container Drum Container

Outside Dim. 12ft x 5ft x 6ft 14ft x 6ft x 6ft 12ft x 5ft x 6ft 14ft x 6ft x 6ft(L x W x H) Imperial

Outside Dim. 3,700 x 1,600 x 1,764 4,200 x 1,920 x 1,870 3,700 x 1,600 x 1,764 4,200 x 1,920 x 1,870(L x W x H) Metric

Tare Weight 1,750 2,250 2,000 2,600

Payload 9,250 8,750 9,000 8,400

Max. Gross Weight 11,000 11,000 11,000 11,000

RUBBISH WATER SKIPS MUD SKIPS /BINS DRILL CUTTING BINSCode: 90000296 cargo nets available for skips Code: 90000294 Code: 90000297

TYPE 3M3 RUBBISH BIN 7.3M3 WASTE SKIP MUD SKIP

Description Rubbish Bin with Lids Waste Skip Mud Skip



Tare Weight 1,100 2,500 1,650

Payload 3,000 7,500 9,350

Max. Gross Weight 4,100 10,000 11,000

CAGES FRAMES TOOL BASKETSCode: 90000295 Code: 90000299 Code: 90000300

TYPE TTF GAS BOTTLE CAGES 7.6M (600 WIDE)

Description Tubular Transport Frame 16 Cylinder Tool Basket


Outside Dim. 4,370 x 1,310 x 1,450 1,150 x 1,210 x 2,230 7,600 x 600 x 575(L x W x H) Metric

Tare Weight 1,100 535 1,600

Payload 10,900 1,720 6,000

Max. Gross Weight 12,000 2,255 7,600

OFFSHORE CONTAINER FLEET 3

TANKS ISO tanks also availableCode: 90000290

TYPE 2900 LITRE TANK 4000 LITRE TANK HELIFUEL TANK (2,900 LITRE) HELIFUEL TANK (4000 LITRE)

Description Chemical Tank Chemical Tank Helifuel Tank Helifuel Tank

Outside Dim. 6ft x 6ft x 7ft 6ft x 6ft x 8ft 6ft x 6ft x 7ft 6ft x 6ft x 8ft(L x W x H) Imperial

Outside Dim. 1,995 x 1,995 x 2,185 1,995 x 1,995 x 2,571 1,995 x 1,995 x 2,185 1,995 x 1,995 x 2,571(L x W x H) Metric

Tare Weight 1,790 1,970 1,790 1,970

Payload 4,710 6,030 2,710 6,030

Max. Gross Weight 6,500 8,000 4,500 8,000

WORKSHOP CONTAINERS hoists & monorails availableCode: 90000298

TYPE 3M WORKSHOP 4.5M WORKSHOP 6M WORKSHOP

Description Workshop Container c/w Monorail & Hoist c/w Monorail & Hoist



Tare Weight 3,580

Payload 4,020

Max. Gross Weight 7,600

REFRIGERATED CONTAINERS Code: 90000301

TYPE SINGLE ZONE TWIN ZONE

Description Chiller Freezer Container Chiller Freezer Container

Outside Dim. 12ft x 8ft x 10ft 12ft x 8ft x 10ft(L x W x H) Imperial

Outside Dim. 3,658 x 2,440 x 3,048 3,658 x 2,440 x 3,048 (L x W x H) Metric

Tare Weight 5,000

Europe T +44 1224 719 200 F +44 1224 708 677 E [email protected] Middle East T +9714 8838 236 F +9714 8838 920 E [email protected] T +1281 260 6016 F +1281 260 6969 E [email protected] T +603 2080 5080 F +603 2080 5083 E [email protected] Africa T +234 803 402 8010 F +1952 674 8453 E [email protected]

Printed on environmentally friendly paper • FEPP-Rev1108

Regional Contact Points

Date post:	05-Jun-2018
Category:	Documents
Upload:	truongminh
View:	320 times
Download:	13 times

FLUID END PUMP PARTS TRIPLEX MUD PUMPS - Scomiscomi.com.my/gui/pdf/dmw_case_history/ofd_fepp_prod...

Documents