E N V I R O D E S I G N

EXHAUST TREATMENT SYSTEMS

Fairbanks Morse Engine ENVIRO DESIGN® exhaust treatment systems ensure EPA emission compliance, and are

designed for safety, long life and ease of maintenance. Derived from decades of engineering and manufacturing expertise,

ENVIRO DESIGN® technologies represent a variety of products that enable customers to improve effi ciency and emissions.

Fairbanks Morse Engine ENVIRO DESIGN® exhaust treatment products and services include:

Catalyst element access is

at ground level for safe and

easy maintenance

Catalysts can treat exhaust from diesel or natural gas

Integrated Silencer and Emissions Control

Same exhaust entry point from engine to Catalyst System

No ladder and platform

Site evaluation, sizing, design and support capabilities

Turnkey installation and compliance monitoring

One architecture for either application

Faster and easier installation; compact size

No need to change footprint from current confi guration

Increased safety and reduced Installation costs

Reduces complexity, time, cost, and risk

Single source system for better reliability and less risk

F E A T U R E B E N E F I T

www.fairbanksmorse.com

Diesel Oxidation Catalysts (DOCs)

Ensure EPA RICE NESHAP compliance for diesel or dual fuel

engines by reducing Carbon Monoxide (CO); Hydrocarbons

(HC) and EPA classifi ed Hazardous Air Pollutants (HAPs).

Natural Gas Oxidation Catalysts

Oxidation catalysts for Lean Burn Natural Gas Engines

reduce Carbon Monoxide (CO) and Hydrocarbons (HC) and

EPA classifi ed Hazardous Air Pollutants (HAPs).

3-Way Catalysts for Rich Burn Natural Gas Engines reduce

Carbon Monoxide (CO); Hydrocarbons (HC); NOx and EPA

classifi ed Hazardous Air Pollutants (HAPs).

Catalytic Silencers

Integrated catalyst and silencer to ensure minimal back

pressure and optimal system performance. Our ground access

service design is safe, easy to install and maintain.

Crankcase Ventilation Systems

Captures oil laden emissions (blow-by) from the crankcase.

Maintains vacuum/pressure and protects engine seals and

turbocharger.

•

•

Rev. A - 112310

T U R N K E Y S O L U T I O N S A N D E X P E R T I S E

Emission control devices to meet regulations

RICE NESHAP may require exhaust gas and open crankcase

emissions treatment. We have the experience to guide you

from sizing and design to unit installation and monitoring.

Testing and site evaluation

Fairbanks Morse Engine can help you evaluate specifi c

emission sources, and recommend a standard or custom

design to minimize back pressure, installation costs and

temperature requirements. If the site requires pre- and post-

compliance testing, we can provide accredited testing.

Monitoring and controls

The Fairbanks Morse system includes a comprehensive data

logging monitoring system that allows easy documentation of

requirements for RICE NESHAP reporting, including catalyst

inlet temperature and pressure drop across the catalyst.

Information and recommendations

Our staff can offer technical guidance, interpretations of

regulations, evaluation of engine performance and emissions output, and help you decide

what the right alternative is to make each engine RICE NESHAP compliant.

Comprehensive solutions

As an OEM, our expertise goes well beyond emission technology. Many other related

issues can be addressed concurrently by our expert team, including: acoustic treatment,

air fi ltering, ducting, exhaust stacks, noise reduction, minimization of back pressure,

temperature management, fl ow optimization, and structural integrity. The result? One

optimally designed solution with single-source accountability.

A typical Diesel

Oxidation Catalyst

system for existing

engines

RICE NESHAP requires

logging of exhaust

temperature and

backpressure, which

is accomplished by the

Fairbanks Morse Engine

monitoring system

Site evaluation and

custom engineering are

critical, as most existing

applications will have

limited space

O P T I M A L P E R F O R M A N C E

Oxidation Catalysts can reduce Carbon monoxide

(CO) by 90% and Hydrocarbons (HC) by 80%. Each

catalyst element from Fairbanks Morse Engine

uses a robust metal foil design to maximize

both performance and longevity. The proper

catalyst coating is selected to optimize treatment

performance for each application. Unique design

features in each catalyst ensure element integrity.

ACT NOW to avoid the last minute rush! Contact: Steve Lang, Tel: +641.210.2044, Email: steve.lang@fairbanksmorse.com