Folding door systems - Hettich · Whether for the bedroom, living room or kitchen furniture –...

Folding door systems: WingLine

2

Slide it. Love it.

Everyone does it: Slide it. Love it.People like to keep it simple. On their tablet PCs. On their smartphones. The revolutionary aesthetic appeal of vir-tual sliding fascinates millions: gentle, flowing movement, simply at the touch of a finger. But sliding in the real world's right on trend too. Truly practical cars have a sliding door; a sliding roof provides fresh air and a feeling of freedom, and at home we slide panel curtains and doors as room dividers or on furniture. Are you open to new trends? Because if you are, new doors are about to open for you too. In this case they open to the side. Whether for the bedroom, living room or kitchen furniture – Hettich gives you innovative sliding door systems that go perfectly with your furniture.

Are you open to a new love? Welcome to Hettich.

3

ErgonomicsBenefits that come with sliding doors

Sliding doors show what they're made of in everyday use. In terms of ergonomics and convenience, most consumers think sliding doors are better. And for good reasons: open sliding doors don't get in the way where space is at a premium.

Open doors on wall units are not likely to leave you injured. Sliding doors are also easy to open without stretching or dodging out the way.

DesignBeing creative with sliding doors

Sliding doors provide the key to picking up on modern, spacious in-terior design and continuing it in furniture. Large surface doors open the way to purist interior design.

Modern sliding door systems create a look that impresses with nar-row reveals that can also be kept to a minimum with large surface fronts. Easy precision adjustment provides superb finished results with perfect gap alignment.

FunctionalityWhat good cabinet doors need to do

When it comes to cabinet doors, it's the practical aspects most consumers attach importance to, particularly to ease of opening and closing. The benefit of linear movement provided with sliding doors should be combined with low forces needed to open them. Also appreciated is the convenience of Silent System for soft, gentle and silent closing.

The perfect sliding door system is also expected to come with out-standing running performance and give quality you can rely on.

4 www.hettich.com

WingLine 220

Page

Description

Number of door wings

Door wing weight

Side mounting

Door material

Door wing width mm

8 - 9

Side mounted folding door system with guide profile at top / bottom with invisibly installed fittings / guides

2

2400 mm max.

500 mm max.

Wood

Yes

25 kg max.

Door wing height mm

WingLine 230

16 - 17

Side mounted folding door system with guide profile at top for large-size doors

2

20 - 25 kg

Yes

Wood

600 mm max.

3000 mm max.

WingLine 77

24 - 25

Side mounted folding door system with guide profile at top / bottom for heavy doors

2

25 kg max.

Yes

Wood

500 mm max.

2400 mm max.

Folding door systemRange summary / technical comparison

5Technik für Möbel

WingLine 770

32 - 33

Side mounted folding door system with guide profile at top / bottom

2

20 kg max.

Yes

Wood

500 mm max.

2200 mm max.

WingLine 780

40 - 41

Side mounted folding door system with guide profile at top / bottom (optional) for small doors

2

10 kg max.

Yes

Wood

500 mm max.

2200 mm max.

WingLine 26

48 - 49

Side mounted folding door system with guide profile at top / bottom (optional)

2

depends on hinges

Yes

Wood

250 mm max.

1800 mm max. (2200 mm max. with lower guide)

WingLine 170

56 - 57

Side mounted folding door system with runner bar at top

2

depends on hinges

Yes

Wood / wood, wood / aluminium

300 mm max.

2200 mm max.


6 www.hettich.com

Wing 77

Page

Description

Number of door wings

Door wing weight

Side mounting

Door material

Door wing width mm

64 - 65

Folding door system without side mounting, with guide profile at top / bottom, for folding doors that move freely in front of the carcase

2 or 4

2400 mm max.

500 mm max. for 2 door wings, 400 mm max. for 4 door wings

Wood

No

25 kg max. for 2 door wings, 20 kg max. for 4 door wings

Door wing height mm



8 www.hettich.com

The runner profile is mounted on top panel. For high quality furni-ture design and optimum use of storage space.

Bottom guide profile under the bottom panel - for shallow plinth constructions. No visible fittings or profiles inside. More unobstructed space in the cabinet.

Mightily impressed. Your customers will love the sturdy WingLine 220: the top running folding door system connected to the carcase side even makes easy work of moving heavy and tall doors. Up to 25 kg door wing weight. The run-ner profile mounted on the top panel is elegantly concealed behind the doors. Optimum use can be made of storage space because it is not obstructed at any point.

Folding door systemWingLine 220 / attached to the sideAll the benefits at a glance


y

x

Performance summary 10 - 11 Technical details in brief Door sizes Operating principle

System components 12

Planning dimensions 13

Installation 14 - 15

Accessories 76 - 85

Folding door systemWingLine 220 / attached to the sideSummary

10 www.hettich.com

y

x

Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 25 kg Door height up to 2400 mm Door wing width 400 - 500 mm Height adjustment +/- 5 mm Tested with 40000 cycles 1000 - 2400

400 - 500

≤ 25 ≤ 25

Door material Number of door wings and door position

16 - 25 mm

Folding door systemWingLine 220 / attached to the sidePerformance summary

see pages 86 - 87


y

x

Operating principle / 1 folding door with 2 wings

13

3614

50

≤ 10≤ 6

5740,5

5 37

62

64

≤ 23

≥ 7,5C± 5

9

20

37

4

Pivot offset 6 mm

Runningcomponent

Guidecomponent

Centre hinge

Cent

re p

anel

Top panel reinforcement

Height adjustment ± 5Sensys8645i


12 www.hettich.com

HettCAD

WingLine 220 set Set contains all the parts required for 1 folding sliding door with

2 panels

Set comprises: 1 tandem running component with height adjustment 1 guide component 4 clip on centre hinges

Advice: Please order profiles separately

Hinge side of cabinet Order no. PU

left 0 041 248 1 set

right 0 041 247 1 set

Folding door systemWingLine 220 / attached to the sideSystem components

Runner profile For screwing on Length 2000 mm Aluminium, silver anodized

Order no. PU

0 041 249 4 ea.

Guide profile For screwing on Length 2000 mm Aluminium, silver anodized

Order no. PU

0 041 251 4 ea.


Installation dimensions for WingLine 220

20 - 50

≤ 500

20 40

19

1 - 5

1 - 5

≥ 60

ca. R1 0

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

20

ø 35 x 11,5C

27

5,5

C

52

20

ø 35 x 11,5

27

ø 35 x 11,5C

27

64

ø 35 x 12,8

Sensys8645i

64

B2*B1*

ø 35 x 12,8 5,5

C

52

*B1 10,5 11 11,5 12 12,5

*B2 22,5 23 23,5 24 24,5

5 4 3 2 1

Sensys8645i

2-wing door set

2-wing folding doorDoor width 1000 mm max.Door weight / wing 25 kg max.Door wing height 2400 mm max.

2-wing folding door Drilling patterns

Door wing contours and reveals (as finger protection)

Radius as large as possible

Reveal depends on the seal that is used



Guide component

Running component

Overlay Reveal

Inside carcase width

Running component Pivot offset

6 mm

Clip on centrehinge

Guide

Clip on centrehinge

Drill hole spacing mm

Reveal mm

Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm

Folding door systemWingLine 220 / attached to the sidePlanning dimensions

14 www.hettich.com

Installing runner and guide profile / preparing door set

1.

2.

3.

1. 2.

3.

Process for installing door set

Folding door systemWingLine 220 / attached to the sideInstallation


Installing running and guide components

Height adjustment on running component

± 5


16 www.hettich.com

For mammoth tasks. WingLine 230 is the giant among folding door systems: areas of over 6 m2 are opened up in a single movement. Perfect for large cabinets, e.g. in the office or util-ity room. As an agile room divider. Or for a walk-in wardrobe in living areas that can be opened and closed with a turn of the hand. WingLine 230 has exactly what it takes, supporting doors with a leaf weight of 20 to 25 kg. Extremely sturdy: side mounting with Sensys 8645i fast assembly concealed hinge. WingLine 230 requires neither centre panels nor any bottom guide.



y

x



Planning dimensions 21 - 22

Installation 23

Accessories 76 - 85


18 www.hettich.com

y

x

Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight 20 to 25 kg Door height up to 3000 mm Door wing width up to 600 mm Tested with 40000 cycles

≤ 3000

400 - 600

20 - 25 20 - 25


16 - 25 mm


see pages 86 - 87


y

x


ø 5

11,3

68,7

0,8

1,520 19,5

120

80

ø 35

20

11,5

19

5

5

35,5

Runnercarriage

Damper forrunner profile

Screw slot


20 www.hettich.com

HettCAD


2 panels, right or left, or 2 folding doors with 2 panels each on right and left

Set comprises: 1 / 2 running components 5 / 10 folding door hinges for pressing in 1 / 2 dampers on the loose shelf 1 / 2 dampers on the runner profile Fixing material



left 0 010 083 1 set

right 0 010 084 1 set

left and right 0 079 015 1 set


Runner profile For 19 mm top shelf For screwing on Length 2400 mm Aluminium, anodized black / powder coated white

Colour Order no. PU

white 0 079 013 4 ea.

black 0 079 014 4 ea.



20 - 50

400 - 600

20 50

LK

LK

≤ 5

ø 35 x 11,5

20

13

120

80

44,5

ø 35 x 12

5

5,5

52

5

ø 1 0 x 1 1,5ø 35 x 12

5

5,5

52

5

ø 10 x 11,5

27

ø 35 x 12 ø 35 x 12

C

5,5

52

ø 35 x 12,8

C

5,5

52

ø 35 x 12,8

Sensys8645i

Sensys8645i

Sensys8645i

2-wing door set

2-wing folding doorDoor width 800 - 1200 mmDoor weight / wing 20 - 25 kgDoor wing height 2000 - 3000 mm

Drilling patterns

4-wing folding doorDamper on runnerprofile

Damper on looseshelf

Foldingdoor hinge

Foldingdoor hinge

Pivot offset6 mm

Pivot offset6 mm

Runnercarriage

Overlay (hinge)

1 folding door with 2 wings(right hinged)

Reveal Overlay (runner carriage)

Foldingdoor hinge

Foldingdoor hinge

Damper on loose shelf

Damper on runnerprofile

Runningcomponent

Calculation of door width / door wing width2 folding doors with 4 wingsDoor width = inside carcase width + (2 x overlay1)Door panel width = (inside carcase width – 3 x reveal + 2 x overlay1) ÷ 4Overlay1: max. 15 mm, C dimension 5 mm1 folding door with 2 wingsDoor width = inside carcase width + (overlay1 + overlay2)Door panel width = (inside carcase width – 1 x reveal + overlay1 + overlay2) ÷ 2Overlay1: max. 15 mm, C dimension 5 mmOverlay2: max. 4 mm

Sensys8645i

Overlay OverlayReveal RevealReveal 1 1

1 2

2 folding doors with 4 wings


22 www.hettich.com


19

1 - 5

1 - 5

≥ 60

ca. R1 0

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

5

5

52

5, 5

0

3

6

1.

2.

0 3

3 6

6 12






Runnercarriage

1. Reveal adjustment: infinitely from minimum reveal to + 4 mm.2. Gradual adjustment of the pivot offset (0 / 3 / 6) allows door protrusion to be set to 3, 6 or 12 mm.

Folding door hinge

Pivot offset mm Door protrusion mm

1. Reveal adjustment2. Pivot offset



Installing runner profile / preparing door set

~ 320

~ 320

19,5

Installing door set

1.

2.

3.


24 www.hettich.com

Generating for power. Attached to the carcase side, the WingLine 77 folding door system even has no problem moving door wings weighing 25 kg. Running action is precision controlled and velvety smooth. Side mounting with the Sensys 8645i fast assembly concealed hinge saves valuable time.



y

x





Accessories 76 - 85


26 www.hettich.com

y

x

Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 25 kg Door height up to 2400 mm Door wing width up to 500 mm Height adjustment +/- 3 mm Centre panels recessed 40 mm Tested with 40000 cycles

1000 - 2400

400 - 500

≤ 25 ≤ 25


16 - 25 mm

Top running sliding door systemWingLine 77 / attached to the sidePerformance summary

see pages 86 - 87


y

x

Operating principle / folding door with 2 wings

402 17,3

48 ± 3

64

C

≥ 55

2

≥ 2

17,3

(≥ 35)

26,5

26,2

26,2

26,5

≥ 15

Sensys8645i

Pivot offset 6 mm

Tandemrunningcomponent

Clip oncentrehinge

Guide component

Damper

Lever torear

Top running sliding door systemWingLine 77 / attached to the sidePerformance summary

28 www.hettich.com

HettCAD


2 panels, right or left

Set comprises: 1 tandem running component 1 support with height adjustment 1 guide component 4 clip on centre hinges 2 noise absorbing felts



left 0 070 983 1 set

right 0 070 984 1 set

Runner profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized

Order no. PU

9 193 573 4 ea.

Guide profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized

Length mm Order no. PU

2000 0 072 919 4 ea.



WingLine 77 installation dimensions for 1 folding door with 2 wings

20 - 50

≤ 500

20 40

19

1 - 5

1 - 5

≥ 60

ca. R1 0

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

LK

64

27

20

27

20

ø 35 x 11,5

64

B2*B1*

52

5,5ø 35 x 12,8

C

52

5,5ø 35 x 12,8

C

ø 35 x 11,5

*B1 10,5 11 11,5 12 12,5

*B2 22,5 23 23,5 24 24,5

5 4 3 2 1

3

Sensys8645i

Sensys8645i

2-wing folding door


2-wing door set Drilling patterns






Runningcomponent

Guidecomponent

Clip oncentrehinge

Pivot offset6 mm

Overlay Reveal

Running component

Clip oncentrehinge

Guide component

Drill hole spacing mm

Reveal mm

Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 6 mm

* 0 positionHeight adjustmentwith spindle

CarcaseThe top panel design shouldbe arranged so that the toppanel does not sag by morethan 1,5 mm under the loadof the folded doors


30 www.hettich.com

Installing runner profile Installing guide profile

1. 2.

3.

�� 1. 2.

3.

Preparing door set



Installing running and guide components / centre hinge


32 www.hettich.com

Cushioned: the Sensys concealed hinge even closes heavy doors gently and silently.

Nifty: the doors are easy to fit and remove. Shelves are rearranged in a tick.

3 benefits in 1 system. Are you looking for a fold-ing door system with a high load capacity and attractive design – and do you want it to be quickly installed? If so, WingLine 770 is the perfect system for you. The door wings are quickly hooked in and aligned. The running components easily clip into the runner profile. Quality that's felt in every movement. Rated for door wing weights up to 20 kg – for plenty of design flexibility.



y

x





Accessories 76 - 85


34 www.hettich.com

y

x

Technical details in brief Door size and door weight For one folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 20 kg Door height up to 2200 mm Door wing width up to 500 mm With WingLine 26 as bottom guide Tested with 40000 cycles 1000 - 2200

400 - 500

≤ 20 ≤ 20


16 - 25 mm


see pages 86 - 87


y

x

Operating principle

30,5

22,7

64

2 40

26,2

17,3

26,5

ø 5

26,5

≥ 55

≥ 15

47,5

ø 4 x 16Damper

Reveal adjustment

Bottom panel

- 2 / + 2,5 mm


36 www.hettich.com

HettCAD


2 panels Running components and guide components with fast installation

Set comprises: 1 running component 1 guide component 4 folding door hinges, including drilling template



left 0 070 968 1 set

right 0 070 969 1 set


Drilling template for folding door hinge For setting 2 mm and 5 mm reveals Plastic

Order no. PU

1 079 491 150 ea.

Runner profile For screwing on Length 2000 mm Aluminium, bright

Order no. PU

1 079 089 4 ea.


Order no. PU

0 072 919 4 ea.



20 - 50

≤ 500

20 40

19

1 - 5

1 - 5

≥ 60

ca. R1 0

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

20

ø 35 x 11,5C

27

5,5

C

52

20

ø 35 x 11,5

27

ø 35 x 11,5C

27

64 ø 35 x 12,8 5,5

C

52

32

32

32

B *B *

ø 35 x 12,8

13,5 14 14,5 15 15,5

5 4 3 2 1

Sensys8645i

Sensys8645i

2-wing door set


Folding door with 2 wings Drilling patterns






Guide component

Runningcomponent

Folding doorhinge

Pivot offset 5 mm

Overlay RevealGuide component

Running component

Folding doorhinge


* Drill hole spacing

Reveal mm

Hinges / mounting plates should be ordered separately – see concealed hinges

LK

Folding door systemWingLine 770 / attached to the side / load capacity 20 kgPlanning dimensions

38 www.hettich.com

Installing runner profile / preparing door set

Installing door set

Folding door systemWingLine 770 / attached to the side / load capacity 20 kgInstallation


Process for installing door set

1.

2.

1.

2.

Installing running and guide components

Folding door systemWingLine 770 / attached to the side / load capacity 20 kgInstallation

40 www.hettich.com

Without a sound: fitted with the Sensys concealed hinge, these folding doors close gently and quietly.

Effortless: hook fitting into runner profile, engage lock … door move-ment is automatically stabilised.

Less production effort. The WingLine 780 folding door system manages with a simple carcase construction. Installation couldn't be easier. Most practical: To fit shelves, the door wing detaches from the running element and simply folds back. Can be used on hinged doors weighing up to 10 kg.



y

x





Accessories 76 - 85


42 www.hettich.com

y

x

Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 10 kg Door height up to 2200 mm Door wing width up to 500 mm With WingLine 26 as bottom guide Tested with 40000 cycles ≤ 2200

(≤ 900)

400 - 500

≤ 10 ≤ 10


16 - 25 mm


see pages 86 - 87


y

x

Operating principle

30,5

22,7

47,5

2 40

26,2

17,3

26,5

ø 5

26,5

ø 4 x 16

≥ 55

≥ 15

Damper

Reveal adjustment

Bottompanel

- 2 / + 2,5 mm


44 www.hettich.com

HettCAD

Set 1 WingLine 780 with bottom guide component Set contains all the parts required for 1 folding sliding door with 2 panels Door height 2200 mm max. Running components and guide components with fast installation

Set comprises: 1 running component 1 guide component 4 folding door hinges, including drilling template



left 0 070 971 1 set

right 0 070 972 1 set

Set 2 WingLine 780 without bottom guide component Set contains all the parts required for 1 folding sliding door with 2 panels Door height 900 mm max. Running component with fast installation

Set comprises: 1 running component 2 folding door hinges, including drilling template



left 9 080 212 1 set

right 9 080 213 1 set


Drilling template for folding door hinge For setting 2 mm and 5 mm reveals Plastic

Order no. PU

1 079 491 150 ea.

Runner profile For screwing on Length 2000 mm Aluminium, bright

Order no. PU

1 079 089 4 ea.


Order no. PU

0 072 919 4 ea.



20

ø 35 x 11,5C

27

ø 35 x 12,85,5

C

52

20

ø 35 x 11,5

27

ø 35 x 12,8 5,5

C

52

32

32

32

B *B *

C

20 - 50

≤ 500

20 40

19

1 - 5

1 - 5

≥ 60

ca. R1 0

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

13,5 14 14,5 15 15,5

5 4 3 2 1

Sensys8645i

Sensys8645i

2-wing door set


Folding door with 2 wings Drilling patterns






Guide component

Runningcomponent

Folding doorhinge

Pivot offset 5 mm

Overlay Reveal

Guide component

Running component

Folding doorhinge


* B drill hole spacing mm

Reveal mm


LK


46 www.hettich.com

Installing runner profile / preparing door

Installing door set



Installing door set

1.2.

1.

2.

Installing runners


48 www.hettich.com

Good basis: WingLine 26 is the preferred option for the bottom guide.

Destined for greater things: WingLine 26 is also suitable as a top runner system for small doors.

Economic miracle. Reliable system providing excellent value for money: the WingLine 26 folding door system manages with-out a bottom guide. Given its uncomplicated design, the WingLine 26 system is also often used for a bottom guide – where it comple-ments the top running WingLine 770 / 780.



y

x





Accessories 76 - 85


50 www.hettich.com

y

x

Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors or wood / aluminium framed doors Suitable for use with Sensys hinge with Silent System Door wing weight depends on hinges Door height up to 1800 mm (2200 mm with bottom guide) Door wing width up to 250 mm Ideal as bottom guide for WingLine 770 / WingLine 780 Tested with 40000 cycles

≤ 1800(2200)

≤ 250


AL

16 - 19 mm


see pages 86 - 87


y

x

Operating principle

≤ 5 ø 355,25

10

11,5

26,2

17,3

35

26,5

1

2 ≥

Pivot offset


52 www.hettich.com

HettCAD

Guide component for fast installation For fast installation With 3 runner rollers and 1 concealed hinge Steel, nickel plated Silver / plastic, grey


left 0 070 956 10 ea.

right 0 070 959 10 ea.

Centre hinge 625 Centre hinge for folding doors Can be installed at the centre or with pivot offset Top running performance due to abrasion-resistant distance rings

with pivot bearing With fixed steel pin Steel, nickel plated

Order no. PU

0 071 648 10 ea.

Centre hinge with adjustable offset pivot Centre hinge for folding doors For door thicknesses over 15 mm Same drilling pattern for door and side element, both elements are

mounted separately The reveal can be infinitely adjusted from minimum reveal to + 4 mm,

application is always flush Gradual adjustment of the pivot offset with 0 mm, 3 mm and 6 mm Zinc die-cast nickel plated

Mounting option Order no. PU

For screwing on 0 046 787 10 ea.

For pressing in 0 052 095 10 ea.


Socket M5 x 11 mm for folding door hinge 625 For M5 thread Drilling diameter 10 mm Plastic, white

Order no. PU

0 078 920 200 ea.

11

ø 10


Length mm Order no. PU

2000 0 072 919 4 ea.



20 - 50

≤ 250

20 40

19

1 - 5

1 - 5

≥ 60

ca. R1 0

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

20

ø 35 x 11,5 ø 35 x 12,8

ø 35 x 12,8

5,5

5,5

CC

C

27 52

52

1 - 5

Sensys8645i

Sensys8645i

2-wing door set

2-wing folding door Drilling patterns





Reveal depends onthe seal that is used

Guide component

Centre hinge

Pivotoffset 5,25 mm

Overlay Reveal

Guide component



2-wing folding doorDoor width 500 mm max.Door wing height from 800 to 1800 mm

LK


54 www.hettich.com

Installing runner profile Preparing door set

Installing door set



Installing door set

32

9

8,519

1,25

50

Installing guide components

2


56 www.hettich.com

170° opening angle: showing where everything is and never in the way.

Floor clearance: a bottom runner can be omitted. Minimal door pro-trusion for unobstructed access.

Commanding view. WingLine 170 is the folding door system with a generous opening angle of up to 170°– with everything inside in full view and easily accessible. On opening, the guide bar positioned on the top panel lifts the outer door half from the carcase. No contact – no running noise!



y

x





Accessories 76 - 85


58 www.hettich.com

y

x

Technical details in brief Door size and door weight For 1 folding door with 2 wings Guide bar mounted on top panel Overlay door position For wooden doors or wood / aluminium framed doors Suitable for use with Sensys hinge with Silent System Door wing weight depends on hinges Door height up to 2200 mm Door wing width up to 300 mm Opening angle up to 170° Runner bar only approx. 10 mm thick Tested with 40000 cycles

800 - 2200

250 - 300


AL

16 - 25 mm


see pages 86 - 87


y

x

Operating principle

12

8

ø 10 x 12

8,5

2

430

110° / 125°

≥ 12

≥

Opening angle

Top mountedroller fitting

Guide bar

Carcase inside edge

Drilling forsocket 33


60 www.hettich.com

HettCAD


2 panels

Set comprises: 1 runner bar with base and adjustment element 1 side mounted roller fitting Fixing material

Order no. PU

0 074 658 1 set

Centre hinge 625 Centre hinge for folding doors Can be installed at the centre or with pivot offset Top running performance due to abrasion-resistant distance rings

with pivot bearing With fixed steel pin Steel, nickel plated

Order no. PU

0 071 648 10 ea.

Centre hinge with adjustable offset pivot Centre hinge for folding doors For door thicknesses over 15 mm Same drilling pattern for door and side element, both elements are

mounted separately The reveal can be infinitely adjusted from minimum reveal to + 4 mm,

application is always flush Gradual adjustment of the pivot offset with 0 mm, 3 mm and 6 mm Zinc die-cast nickel plated

Mounting option Order no. PU

For screwing on 0 046 787 10 ea.

For pressing in 0 052 095 10 ea.



WingLine 170 installation dimensions

12

8

ø 10 x 12

8,5

2

430

110° / 125°

≥

≥

≥ 12

≥ 12

≥ 8

ø 10 x 12

8,5

2

≥ 12

± 5

200 250 300

110° / 125° 400 370 340

170° 370 350 320

Selekta Pro 2000 / 180° 370 340 310

Opening angle

Top mountedroller fitting

Guide bar

Carcase inside edge


Opening angle 170°

Guide bar

Carcase inside edge


Adjustmentfacility

Use Sensys, Intermat, SlideOn or Selekta Pro 2000 hinge formounting the door on the carcase.With opening angles of 110° / 125°, 170° and 180°,Wing Line 170 permits unrestricted access to the cabinet interior– see table.Hinges / mounting plates must be ordered separately.– see concealed hinges.

Maximum door height: 2200 mm – requiring a minimumof 5 hinges.

Wing width min. max.mm

Hinge approx. min. carcase depth in mm


62 www.hettich.com

Preparing door set

Installing door set



Installing runner bar


64 www.hettich.com

Leave a good impression: design flexibility with up to 4 door wings. No attachment to carcase side.

Tried and proven: sturdy runner profile on the top panel as well as bottom guide.

Fantastic flexibility. With Wing 77, you can produce cabinet fronts with two door wings (no more than 25 kg each) or four door wings (no more than 20 kg each). The clever part: the entire door set is free moving! Door sets can also be inter-linked. Surprise your cus-tomers individually tailored folding door solutions for the bedroom or office. Wing 77 gives you the design flexibility to do so.

Folding door systemWing 77 / freely moveableAll the benefits at a glance


y

x


System components 68 - 69

Planning dimensions 70 - 71


Accessories 76 - 85

Folding sliding door systemWing 77 / freely moveableSummary

66 www.hettich.com

y

x

Technical details in brief Door size and door weight Folding door system with 2 or 4 door wings Overlay door position For wooden doors Door wing weight up to 20 kg (25 kg) with 4 (2) door wings Door height up to 2400 mm Door wing width up to 400 mm (500 mm) with 4 (2) door wings Height adjustment +/- 3 mm Centre panels recessed 40 mm Tested with 40000 cycles

1000-

2400

400 - 500

≤ 25 ≤ 251000

-2400

400

≤ 20 ≤ 20 ≤ 20 ≤ 20


16 - 19 mm

Folding door systemWing 77 / freely moveablePerformance summary

see pages 86 - 87


y

x

Operating principle / 1 folding door with 2 wings40

2 17

48 ± 3

64

C

≥ 55

2

≥ 2

17

40(≥ 35)

26,5

26,2

26,2

26,5

≥ 15

110°

Pivot offset 6 mm

Tandemrunner

Clip on centrehinge

Intermat 9943

Guidecomponent

Damper

Lever to rear


26,5

4

≥ 45

≥ 6235

13

13

64

48±3

ø 35

402

8

5

3217, 3

1

13

3

9,51

5

ø 5

17 32

11,5Tandem running component

Latch plates

Spacer 2 wings

Spacer spindle4 wings

Clip on centrehinge

Guidecomponent

Stop attachment

Centre guideAdjustablereveal ± 1

End stop Lever

Lever

Stop

"X" spacer

Stop attachment

Damper

Damper

Folding door systemWing 77 / freely moveablePerformance summary

68 www.hettich.com

HettCAD

Set 1 Wing 77 Set contains all the parts required for 1 folding sliding door with

2 panels The inside carcase width of 800 mm should not be exceeded. The top

panel must be designed so that it cannot sag by more than 1.5 mm under the weight of the folded doors.

Set comprises: 2 tandem running components for fast installation 2 brackets for running component with + / - 5 mm height adjustment 2 guide components 4 clip on centre hinges 4 spacers 4 end stops 4 noise absorbing felts (to buffer doors against the carcase) for posi-

tioning at the top and bottom on each door wing Fixing material


Order no. PU

0 070 986 1 set

Set 2 Wing 77 Set contains all the parts required for 1 folding sliding door with

4 panels The inside carcase width of 800 mm should not be exceeded. The top

panel must be designed so that it cannot sag by more than 1.5 mm under the weight of the folded doors.

Set comprises: 4 tandem running components for fast installation 4 supports for running component with + / - 5 mm height adjustment 1 spacer spindle for tandem running component 3 guide components and centre guide component 2 latch plates 8 clip on centre hinges 4 spacers 4 end stops 8 noise absorbing felts (to buffer doors against the carcase) for posi-

tioning at the top and bottom on each door wing Fixing material


Order no. PU

0 070 987 1 set

Folding sliding door systemWing 77 / freely moveableSystem components


HettCAD

Guide profile For screwing on, screw on position predrilled Length 3200 mm Aluminium, silver anodized

Order no. PU

0 070 985 4 ea.

Runner profile For screwing on, screw on positions predrilled Length 3200 mm Aluminium, silver anodized

Order no. PU

9 193 574 4 ea.

Folding sliding door systemWing 77 / freely moveableSystem components

70 www.hettich.com

Installation dimensions for Wing 77 for 1 folding door with 2 wings

19

1 - 5

1 - 5

≥ 60

ca. R10

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

160

20 - 50

≤ 500

LK

16,5 17 17,5 18 18,5

5 4 3 2 1

C 64

27

20

27

20

64

B*

C

ø 35 x 11,5

ø 35 x 11,5

2-wing door set

2-wing folding doorDoor width 1000 mm max. Door weight / wing 25 kg max. Door wing height 2400 mm max.

Drilling patterns

Door wing contours and reveals(as finger protection)



Reveal depends ony the seal that is used



2-wing folding door

Clip oncentre hinge

Tandemrunningcomponent

Outer guidecomponent

Overlay Reveal

Drill hole spacing * mm

Reveal mm

Tandemrunning component

Clip oncentre hinge

Outer guide component

LH +wingthickness-13

Folding sliding door systemWing 77 / freely moveablePlanning dimensions


Installation dimensions for Wing 77 for 1 folding door with 4 wings

19

1 - 5

1 - 5

≥ 60

ca. R10

≤ 19 ≤ 25

≤ 19 ≤ 25

≈ R 10

≈ R 1≈ R 10

1 - 5

C 64

27

20ø 35 x 11,5

27

20

ø 35 x 11,5

≥ 27

64

B* 15

32

ø 10 x 11,5

27

20

ø 35 x 11,5C*

C* 64

27

20ø 35 x 11,513

64

B*

C64

27

20ø 35 x 11,5

27

20

ø 35 x 11,5C C

LK

240

20 - 50

≤ 400

16,5 17 17,5 18 18,5

4 4,5 5 5,5 6

5 4 3 2 1

4-wing door set

4-wing folding doorDoor width 1600 mm max. Door weight / wing 20 kg max. Door wing height 2400 mm max.

Drilling patterns

Door wing contours and reveals(as finger protection)





Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcasewidth – 3 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 6 mm

Folding door with 4 wings



Clip oncentre hinge

LH +wingthickness -13

Centreguide component

Latchplate

Clip oncentre hinge

Clip oncentre hinge



Spacerspindle

Centreguide component

Latchplate

Outerguide component

Overlay Reveal

* B drill hole spacing mm

* C drill hole spacing mm

Reveal mm

Outerguide component

Folding sliding door systemWing 77 / freely moveablePlanning dimensions

72 www.hettich.com

Installing runner profile

Installing runner profile and end stop

Installation spacers and spacer spindle

Folding sliding door systemWing 77 / freely moveableInstallation


Preparing door set, left

Preparing door set, right


74 www.hettich.com

Installing door sets

Door combinationsInstalling spacers X (reveal is not adjustable) on the running and guide components permits door combinations on uninterrupted runner and guide profiles.

Installation information

3

* 0 positionHeight adjustmentwith spindle

Note: installation and removal are only possible in 0-position, i.e. with 3 mm clearance



76 www.hettich.com

HettCAD

Door profile Predrilled For door thicknesses of 15-16 mm

Material Finish Length mm Quantity for 2-doors Quantity for 3-doors Order no. PU

steel silver, coated 2500 3 4 9 206 249 1 ea.

Aluminium Silver anodized 2050 3 4 9 117 416 1 ea.


Installation / dimensional drawing

ø 5

20

14

= 66 a2 = 12816,5

29

a1 a7=256

a8= 288 aX

L

Door profile Predrilled For door thicknesses of 18-19 mm





Sliding door systemAccessories


ø 5

20

14

= 66 a2 = 12819,5

29

a1 a7=256

a8= 288 aX

L


HettCAD

Door end profile, L shaped Predrilled For door thicknesses of 15-16 mm

Material Finish Length mm Quantity for 2-doors Order no. PU

steel silver, galvanised 2500 1 9 206 307 1 ea.

Aluminium Silver anodized 2050 1 9 117 418 1 ea.



ø 5

16,5

23

14

= 66 a2 = 128a1 a7

=256a8

= 288 aX

L


Door end profile, U shaped Predrilled For door thicknesses of 15-16 mm


steel silver, coated 2500 2 9 206 252 1 ea.




ø 5

23,75

16,5

14

= 66 a2 = 128a1 a7

=256a8

= 288 aX

L

78 www.hettich.com

HettCAD

Door end profile, U shaped Predrilled For door thicknesses of 18-19 mm







ø 5

23,75

19,5

14

= 66 a2 = 128a1 a7

=256a8

= 288 aX

L

Carcase end profile for rear most door Predrilled






ø 5

14,8

17

10a1 = 70 a2 = 352 a1

L


HettCAD

Carcase end profile for front most door Predrilled






ø 5

46

14,8

10a1 = 70 a2 = 352 a1

L

Brush sealing strip For dust proof covers Length 2500 mm Self adhesive Grey


8

6,9

4,8

6

10

6,9


Height mm Quantity for 2-doors Quantity for 3-doors Order no. PU

8 3 4 9 206 282 1 ea.

80 www.hettich.com

HettCAD

Connecting strap For connecting segmented sliding doors Galvanised steel

Order no. PU

9 117 506 1 ea.



HettCAD

Adjustment fitting, aluminium For straightening distorted furniture doors Can also be used as a precautionary measure to prevent doors from

warping For door/front thicknesses of 16 - 25 mm Maximum door / front panel height 2600 mm Length of threaded rod 2000 mm, can be shortened as required Fast, screwless installation and adjustment requiring just one hand Patented system with encapsulated threaded rod For silent door / front movement Covers for ø 35 mm drillings, plastic, silver Covers for groove, aluminium, silver anodized The adjustment fitting can also be used horizontally It is recommended that 2 vertical adjustment fittings are installed

near the outer edge. On large, wide doors, 2 horizontal fittings can be used instead or in addition

Set comprises: 2 adjustment fittings

Order no. PU

9 117 303 1 set

Technical information

2 x

14

ø 35

16 - 25 12,511

1986

1986

1. 2. 3.

1.

2.

3.

3.

1.

2.

3.

3.


82 www.hettich.com

HettCAD

Adjustment fitting, plastic For straightening distorted furniture doors Can also be used as a precautionary measure to prevent doors from

warping For door / front panel thicknesses from 16 mm Maximum door / front panel height 2600 mm Installing the fitting is simple and straightforward: a pair of threaded

rods, one with a right-hand thread and one with a left-hand thread, are fed into a clamping sleeve

The threaded rods are each additionally supported in a housing that slots into a 35 mm drilling where it is screwed into place

Turning the clamping sleeve produces tensile or compressive force that corrects warping or bowing

The housing, clamping sleeve and threaded rods are covered to pre-vent damage to wardrobe and laundry

The adjustment fitting can also be used horizontally It is recommended that 2 vertical adjustment fittings are installed

near the outer edge. On large, wide doors, 2 horizontal fittings can be used instead or in addition

Set comprises: 1 housing with right-hand threaded rod 1 housing with left-hand threaded rod 1 clamping sleeve 1 plastic cover plate 2 plastic cover strips 2 retainers for cover strips

Order no. PU

0 045 198 2 set


ø 35 T = 12,5

T = 8

111920

> 16

Housing withleft-hand threaded rod

Plastic cover strip

Plastic cover plate

Clamping sleeve

Housing withright-hand threaded rod



HettCAD

Brush sealing strip For dust proof seals Length 2500 mm Height 27 mm Plastic, brown

Order no. PU

0 026 453 40 ea.


Side panel

Rear most door

Carcase

Front most door


84 www.hettich.com

HettCAD

Spacer roller For tall sliding doors Galvanised steel

Order no. PU

0 027 740 10 ea.


ø 5

28

46

Centre panel

Rear most door

Carcase

Front most door

Direct fixing screw



HettCAD

Sloping ceiling adapter For angles of 19° - 59° Load capacity max. 50 kg Height 125 mm Depth 94 mm Width 57 mm White plastic

Set comprises: 2 sloping ceiling adapters

Order no. PU

0 045 319 5 set



86 www.hettich.com

300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1600 1800 2000

300 1,2 1,6 2,0 2,4 2,8 3,2 3,6 4,0 4,4 4,8 5,2 5,6 6,4 7,2 8,0400 1,6 2,1 2,7 3,2 3,7 4,3 4,8 5,3 5,9 6,4 6,9 7,5 8,5 9,6 10,6500 2,0 2,7 3,3 4,0 4,7 5,3 6,0 6,7 7,3 8,0 8,7 9,3 10,6 12,0 13,3600 2,4 3,2 4,0 4,8 5,6 6,4 7,2 8,0 8,8 9,6 10,4 11,2 12,8 14,4 16,0700 2,8 3,7 4,7 5,6 6,6 7,5 8,4 9,3 10,2 11,2 12,1 13,0 14,9 16,8 18,6800 3,2 4,3 5,3 6,4 7,5 8,5 9,6 10,6 11,7 12,8 13,8 14,9 17,0 19,2 21,3900 3,6 4,8 6,0 7,2 8,4 9,6 10,8 12,0 13,2 14,4 15,6 16,8 19,2 21,6 23,91000 4,0 5,3 6,7 8,0 9,3 10,7 12,0 13,3 14,6 16,0 17,3 18,6 21,3 23,9 26,61100 4,4 5,9 7,3 8,8 10,2 11,7 13,2 14,6 16,1 17,6 19,0 20,5 23,4 26,3 29,31200 4,8 6,4 8,0 9,6 11,2 12,8 14,4 16,0 17,6 19,2 20,8 22,3 25,5 28,7 31,91300 5,2 6,9 8,7 10,4 12,1 13,8 15,6 17,3 19,0 20,8 22,5 24,2 27,7 31,1 34,61400 5,6 7,5 9,3 11,2 13,0 14,9 16,8 18,6 20,5 22,3 24,2 26,1 29,8 33,5 37,21600 6,4 8,5 10,7 12,8 15,0 17,0 19,2 21,3 23,4 25,6 27,7 29,8 34,1 38,3 42,61800 7,2 9,6 12,0 14,4 16,8 19,2 21,6 24,0 26,3 28,7 31,1 33,5 38,3 43,1 47,92000 8,0 10,6 13,3 16,0 18,6 21,3 23,9 26,6 29,3 31,9 34,6 37,2 42,6 47,9 53,22200 8,8 11,7 14,6 17,6 20,5 23,4 26,3 29,3 32,2 35,1 38,0 41,0 46,8 52,7 58,52400 9,6 12,8 16,0 19,2 22,3 25,5 28,7 31,9 35,1 38,3 41,5 44,7 51,1 57,5 63,92600 10,4 13,8 17,3 20,8 24,2 27,7 31,1 34,6 38,0 41,5 45,0 48,4 55,3 62,2 69,2

300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1600 1800 2000

300 1,5 2,1 2,6 3,1 3,6 4,1 4,6 5,1 5,6 6,2 6,7 7,2 8,2 9,2 10,3400 2,1 2,7 3,4 4,1 4,8 5,5 6,2 6,8 7,5 8,2 8,9 9,6 10,9 12,3 13,7500 2,6 3,4 4,3 5,1 6,0 6,8 7,7 8,6 9,4 10,3 11,1 12,0 13,7 15,4 17,1600 3,1 4,1 5,1 6,2 7,2 8,2 9,2 10,3 11,3 12,3 13,3 14,4 16,4 18,5 20,5700 3,6 4,8 6,0 7,2 8,4 9,6 10,8 12,0 13,2 14,4 15,6 16,8 19,2 21,6 23,9800 4,1 5,5 6,8 8,2 9,6 10,9 12,3 13,7 15,1 16,4 17,8 19,2 21,9 24,6 27,4900 4,6 6,2 7,7 9,2 10,8 12,3 13,9 15,4 16,9 18,5 20,0 21,6 24,6 27,7 30,81000 5,1 6,8 8,6 10,3 12,0 13,7 15,4 17,1 18,8 20,5 22,2 23,9 27,4 30,8 34,21100 5,6 7,5 9,4 11,3 13,2 15,1 16,9 18,8 20,7 22,6 24,5 26,3 30,1 32,9 37,61200 6,2 8,2 10,3 12,3 14,4 16,4 18,5 20,5 22,6 24,6 26,7 28,7 32,8 36,9 41,01300 6,7 8,9 11,1 13,3 15,6 17,8 20,0 22,2 24,5 26,7 28,9 31,1 35,6 40,0 44,51400 7,2 9,6 12,0 14,4 16,8 19,2 21,6 23,9 26,3 28,7 31,1 33,5 38,3 43,1 47,91600 8,2 10,9 13,7 16,4 19,2 21,9 24,6 27,4 30,1 32,8 35,6 38,3 43,8 49,3 54,71800 9,2 12,3 15,4 18,5 21,6 24,6 27,7 30,8 33,9 36,9 40,0 43,1 49,3 55,4 61,62000 10,3 13,7 17,1 20,5 23,9 27,4 30,8 34,2 37,6 41,0 44,5 47,9 54,7 61,6 68,42200 11,3 15,5 18,8 22,6 26,3 30,1 33,9 37,6 41,4 45,1 48,9 52,7 60,2 67,7 75,22400 12,3 16,4 20,5 24,6 28,7 32,8 36,9 41,0 45,1 49,3 53,4 57,5 65,7 73,9 82,12600 13,3 17,8 22,2 26,7 31,1 35,6 40,0 44,5 48,9 53,4 57,8 62,2 71,1 80,0 88,9

Weight table for chipboard 19 mm

Weight table for MDF 19 mm

Door width mm

Door heightmm

Door width mm

Door heightmm

Door weight in kg (density = 700 kg/m3)

Door weight in kg (density = 900 kg/m3)

Sliding and folding door systemsTechnical informationCalculating door weights


Calculating weights of doors in alternative door materials

Material

Acrylic glass 1200

Aluminium 2700

Balsa wood 120

Concrete 2400

Lead 11300

Iron 7800

Gypsum plasterboard 900

Glass 2600

Hardboard 1000

Hardwood, wet (beech) 900

Hardwood, dry (beech) 800

Cork 300

To calculate the weight of doors in alternative door materials, the specific density of the door material must be taken into consideration.

The table entries refer to 19 mm thickmaterial.The table entries must be multiplied by afactor in order to adjust to material of di�erentthickness.

Density of various materials in kg/m3

Formula for conversionDoor weight = weight for door in thickness of19 mm from table above x factorExampleChipboard doorH x W x D = 2000 x 1800 x 16Weight shown in table for this door size, butmaterial in a thickness of 19 mm = 47.9 kg

Convert to 16 mm door thickness using factorof 0.84 as shown in table on leftDoor weight = 47.9 kg x 0.84 = 40.2 kg

Material thickness mm

Factor

15 0,7916 0,8418 0,9519 1,0020 1,0522 1,1623 1,2126 1,3729 1,53

Adjustment to di�erent material thicknesses

Example

Door made of acrylic glass with a density of 1200 kg/m3Door height: 2000 mm, door width: 1800 mm, material thickness: 6 mm

Door weight [kg]25,9 kg

Height [m]2= x x x

Width [m]1,8

Material thickness [m]0,006

Density [kg/m3]1200

Density kg/m3

Sliding and folding door systemsTechnical informationCalculating door weights

88 www.hettich.com

Folding door systemTechnical informationQuality criteria

The quality of the sliding door systems is monitored continuously.Hettich fittings comply with the national and international qualitystandards of the markets our customers operate in. The diagramsbelow show some of the tests to which Hettich fittings are subjected.

The door must withstand a defined number of opening and closingcycles at a defined speed.

The door must withstand a specific number of oppening cyclesunder a defined tensile load.

Quality that meets all the demands

Endurance test Closing / extension test


90 www.hettich.com

Hettich and the environment: Committed to responsible practice, active protection, innovative thinking.

Hettich takes a responsibility for the world we live in. This awareness defines the strict policy of environmental management that we practise. Our environmental officer has taken personal responsibility for these aspects through- out the group of companies over a period of many years. In addition, a separate environment committee has been established for each production site. We regard statutory provisions as minimum requirements. At significant sites we also implement the stringent EMAS Regulation. And we drive forward developments that in future will help to save even more raw materials and support the necessary endeavours towards sustainability.

Hettich environmental management

In 1996 Hettich started introducing effective environmen-tal management systems under the stringent EMAS Regu-lation (currently: EC Regulation No. 761/2001, including EN ISO 14.001/2004). This not only enables us to improve

our environmental performance on a broad front but also to achieve a high level of safety which, not least, also benefits our customers. This is why we also require our suppliers to meet the necessary minimum standards of environmental protection, industrial safety, health care and social welfare.The results achieved in the drawer runner and drawer system product segment at the Kirchlengern operation in Germany illustrate the impressive effects these measures have and verifiably demonstrate our tireless endeavours to translate words into action:

Relief to the environment between 1997 and 2008:

Specific water consumption: 56 per cent Specific power consumption: 21 per cent Specific heat consumption: 84 per cent Specific CO2 emissions: 29 per cent

Hettich and the environment: Committed to responsible practice, active protection, innovative thinking.


Hettich standard for product materials

Hettich underpins its commitment by applying an internal standard for product materials. This ensures that every pro-duct – from production to disposal – satisfies all environ-mental requirements. Hettich products are durable. Appro-priately foresighted, our rigorous standards are formulated to ensure that international legislation is also met. This provides a reliable base for marketing furniture worldwide.

Zero-energy building - Hettich Forum

The Hettich Forum building with its neutral energy balance is a shining example of future-proof building design. Photovoltaic panels and a solar collection system providing hot water as well as extensive roof greening and use of rain water underscore this building's overall sustainability concept in just the same way as the broad use of cellulose

insulation material from recycled newspapers, highly effi-cient heat recovery and the bulb-free lighting concept do.

With the Hettich Group having acquired European Com-mission GreenBuilding Partner status on 5 March 2009, the comprehensive approach demonstrated by the Hettich Forum has also convinced the adjudicating panel of the national "Green Building Award 2009". Hettich received the first prize to be presented in the "New Building" category.

www.hettich.com

Hettich America, L.P.4295 Hamilton Mill Road Suite 400 Buford, GA 30518Phone: 1-800-438-8424 Fax: 1-800-627-5152 [email protected]

Ord

er n

o. 9

225

581

1608

-014

_Win

gLin

e_08

16_H

US/

en

Date post:	22-Jul-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

Folding door systems - Hettich · Whether for the bedroom, living room or kitchen furniture –...

Documents