Elixir Photonics Incorporated | 46708 Lakeview Blvd, Fremont CA 94538 USA Tel: 1-510-687-1910 | [email protected] | www.elixirphotonics.com
Industrial-grade
Picosecond laser Femtosecond laser UV nanosecond laser
For Precision Machining
Reliable Compact Cost-Effective
Tel: 1-510-687-1910 [email protected] www.elixirphotonics.com
femto
pico
UV
Elixir Photonics Incorporated 46708 Lakeview Blvd, Fremont, CA 94538, USA
Specifications EPEE series
Wavelength (nm) 1064 (532)
Average Power (W) 8, 30 (15)
Pulse Width < 15 ps
Repetition Rate Single shot – 2 MHz
Beam Quality M2 < 1.3
Burst Mode Available
Specifications SABER series
Wavelength (nm) 1030
Average Power (W) 20
Pulse Width < 700 fs
Repetition Rate Single shot – 2 MHz
Beam Quality M2 < 1.3
Burst Mode Available
Specifications DAGGER series
Wavelength (nm) 355
Average Power (W) 10, 15
Pulse Width < 20 ns @ 50kHz
Repetition Rate (kHz) 40 – 100
Beam Quality M2 < 1.3
Burst Mode N/A
High Power Industrial Picosecond Laser
EPEE-30
ww
w.e
lixir
ph
oto
nic
s.c
om
KEY HIGHLIGHTS
Repetition rate of single shot to 2 MHz
TEM00（M2 <1.3)
Pulse width < 15 ps
Pulse energy >200 µJ
Burst Mode available
Compact
RS232 and external GATE control
Assembled in 1000 class clean room
APPLICATIONS
Glass cutting and drilling
Ceramic cutting and drilling
Semiconductor cutting
Precision machining
Injector nozzle drilling
Sapphire cutting and drilling
Thin film cutting
Scientific applications
EPEE-30 combines advantages of fiber laser and free-space solid state amplifier technology to get >30W output power with pulse energy over 200 µJ and pulse duration <15ps.
• The fiber seed enables the EPEE-30 to be more stable, compact and more flexible than the traditional solid-state seed lasers.
• The solid-state amplifier ensures the output of high pulse energy with excellent beam quality and extreme stable operation of the laser.
HIG
H P
OW
ER
IND
US
TR
IAL P
ICO
SE
CO
ND
LA
SE
R
30 W 1064 nm High Power Industrial Picosecond Laser
System Specifications
Center Wavelength 1064 nm
Pulse Repetition Rate Single shot to 2 MHz
Pulse Duration <15 ps
Maximum Average Power > 30 W @ 1 MHz
Average Power Stability < 2% rms over 8 hours
Pulse-to-pulse Stability < 3% rms
Spatial Mode TEM00, M2 < 1.3
Beam Divergence < 2 mrad (full angle)
1/e2 Beam Diameter ~1.6 mm
Beam Roundness > 90%
Pointing Instability < 50 µrad
Polarization Direction Vertical
Polarization Ratio > 100:1
Cooling Water-cooling
Ambient Temperature 15 to 30C
Storage Temperature -10 to 50C
Relative Humidity 10% to 80% (non-condensing)
Warm-up Time < 10 minutes
Operating Voltage 85 to 264 V (50/60 Hertz)
EPEE-30
Mechanical Specifications
Test Data
46708 Lakeview Blvd, Fremont CA 94538, USA | Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
Elixir Photonics follows a policy of continuous product improvement. Specifications are subject to change without notice. Elixir Photonics offers a limited warranty for all EPEE lasers. For full details of this warranty coverage, please contact Sales Department at [email protected].
HIG
H P
OW
ER
IND
US
TR
IAL P
ICO
SE
CO
ND
LA
SE
R
Reliable Compact Cost-Effective
High Power Industrial Picosecond Laser
EPEE-8
KEY HIGHLIGHTS
Repetition rate of single shot to 2 MHz
TEM00（M2<1.3)
Pulse width <15 ps
Pulse energy > 80 µJ
Burst Mode available
Compact
RS232 and external GATE control
Assembled in 1000 class clean room
EPEE-8 combines advantages of fiber laser and free-space solid state amplifier technology to get >8 W output power with pulse energy over 80 µJ and pulse duration <15 ps.
• The fiber seed enables the EPEE-8 to be more stable, compact and more flexible than the traditional solid-state seed lasers.
• The solid-state amplifier ensures the output of high pulse energy with excellent beam quality and extreme stable operation of the laser.
ww
w.e
lixir
ph
oto
nic
s.c
om
H
IGH
PO
WE
R IN
DU
ST
RIA
L P
ICO
SE
CO
ND
GR
EE
N L
AS
ER
APPLICATIONS
Glass cutting and drilling
Ceramic cutting and drilling
Semiconductor cutting
Precision machining
Sapphire cutting and drilling
Thin film cutting
Scientific applications
8 W 1064 nm High Power Industrial Picosecond Laser
System Specifications
Center Wavelength 1064 nm
Pulse Repetition Rate Single shot to 2 MHz
Pulse Duration <15 ps
Maximum Average Power > 8 W @ 1 MHz
Average Power Stability < 2% rms over 8 hours
Pulse-to-pulse Stability < 3% rms
Spatial Mode TEM00, M2 < 1.3
Beam Divergence < 2 mrad (full angle)
1/e2 Beam Diameter ~1.2 mm
Beam Roundness > 90%
Pointing Instability < 50 µrad
Polarization Direction Vertical
Polarization Ratio > 100:1
Cooling Water-cooling
Ambient Temperature 15 to 30C
Storage Temperature -10 to 50C
Relative Humidity 10% to 80% (non-condensing)
Warm-up Time < 10 minutes
Operating Voltage 85 to 264 V (50/60 Hertz)
EPEE-8
Test Data
46708 Lakeview Blvd, Fremont CA 94538, USA | Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
Elixir Photonics follows a policy of continuous product improvement. Specifications are subject to change without notice. Elixir Photonics offers a limited warranty for all EPEE lasers. For full details of this warranty coverage, please contact Sales Department at [email protected].
HIG
H P
OW
ER
IND
US
TR
IAL P
ICO
SE
CO
ND
LA
SE
R
Reliable Compact Cost-Effective
Mechanical Specifications
High Power Industrial Picosecond Green Laser
EPEE-G15
KEY HIGHLIGHTS
Repetition rate of single shot to 2 MHz
TEM00（M2<1.3)
Pulse width <15 ps
Pulse energy > 100 µJ
Burst Mode available
Compact
RS232 and external GATE control
Assembled in 1000 class clean room
EPEE-G15 combines advantages of fiber laser and free-space solid state amplifier technology and SHG technology to get >15 W output power with pulse energy over 100 µJ and pulse duration <15 ps at 532 nm wavelength.
• The fiber seed enables the EPEE-G15 to be more stable, compact and more flexible than the traditional solid-state seed lasers.
• The solid-state amplifier ensures the output of high pulse energy with excellent beam quality and extreme stable operation of the laser.
ww
w.e
lixir
ph
oto
nic
s.c
om
H
IGH
PO
WE
R IN
DU
ST
RIA
L P
ICO
SE
CO
ND
GR
EE
N L
AS
ER
APPLICATIONS
Glass cutting and drilling
Ceramic cutting and drilling
Semiconductor cutting
Precision machining
Sapphire cutting and drilling
Thin film cutting
Scientific applications
15 W 532 nm High Power Industrial Picosecond Green Laser
System Specifications
Center Wavelength 532 nm
Pulse Repetition Rate Single shot to 2 MHz
Pulse Duration <15 ps
Maximum Average Power > 15 W @ 200 kHz
Average Power Stability < 2% rms over 8 hours
Pulse-to-pulse Stability < 3% rms
Spatial Mode TEM00, M2 < 1.3
Beam Divergence < 1.5 mrad (full angle)
1/e2 Beam Diameter ~1.5 mm
Beam Roundness > 90%
Pointing Instability < 50 µrad
Polarization Direction Vertical
Polarization Ratio > 100:1
Cooling Water-cooling
Ambient Temperature 15 to 30C
Storage Temperature -10 to 50C
Relative Humidity 10% to 80% (non-condensing)
Warm-up Time < 10 minutes
Operating Voltage 85 to 264 V (50/60 Hertz)
EPEE-G15
46708 Lakeview Blvd, Fremont CA 94538, USA | Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
Elixir Photonics follows a policy of continuous product improvement. Specifications are subject to change without notice. Elixir Photonics offers a limited warranty for all EPEE lasers. For full details of this warranty coverage, please contact Sales Department at [email protected].
HIG
H P
OW
ER
IND
US
TR
IAL P
ICO
SE
CO
ND
GR
EE
N L
AS
ER
Reliable Compact Cost-Effective
Mechanical Specifications
High Power Industrial Femtosecond Laser
SABER-20
KEY HIGHLIGHTS
Repetition rate of single shot to 2 MHz
TEM00（M2<1.3)
Pulse width < 700 fs
Pulse energy > 200 µJ @ 100 kHz
Burst Mode available
Compact
RS232 and external GATE control
Assembled in 1000 class clean room
SABER-20 combines advantages of fiber laser technology and free-space solid state amplifier technology to get >20 W output power with pulse energy over 200 µJ and pulse duration <700 fs.
• The fiber mode-locked laser seed enables the SABER-20 to be more stable, compact and more flexible than the traditional solid-state seed lasers.
• The solid-state amplifier ensures the output of high pulse energy with excellent beam quality and extreme stable operation of the laser.
ww
w.e
lixir
ph
oto
nic
s.c
om
H
IGH
PO
WE
R IN
DU
ST
RIA
L F
EM
TO
SE
CO
ND
LA
SE
R
APPLICATIONS
Glass cutting and drilling
Ceramic cutting and drilling
Semiconductor cutting
Precision machining
Injector nozzle drilling
Sapphire cutting and drilling
Thin film cutting
Scientific applications
20 W 1030 nm High Power Industrial Femtosecond Laser
System Specifications
Center Wavelength 1030 nm
Pulse Repetition Rate Single shot to 2 MHz
Pulse Duration <700 fs
Maximum Average Power > 20 W @ 100 kHz
Average Power Stability < 2% rms over 8 hours
Pulse-to-pulse Stability < 3% rms
Spatial Mode TEM00, M2 < 1.3
Beam Divergence < 1.5 mrad (full angle)
1/e2 Beam Diameter ~1.6 mm
Beam Roundness > 90%
Pointing Instability < 50 µrad
Polarization Direction Vertical
Polarization Ratio > 100:1
Cooling Water-cooling
Ambient Temperature 15 to 30C
Storage Temperature -10 to 50C
Relative Humidity 10% to 80% (non-condensing)
Warm-up Time < 10 minutes
Operating Voltage 85 to 264 V (50/60 Hertz)
SABER-20
46708 Lakeview Blvd, Fremont CA 94538, USA | Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
Elixir Photonics follows a policy of continuous product improvement. Specifications are subject to change without notice. Elixir Photonics offers a limited warranty for all SABER lasers. For full details of this warranty coverage, please contact Sales Department at [email protected].
HIG
H P
OW
ER
IND
US
TR
IAL F
EM
TO
SE
CO
ND
LA
SE
R
Reliable Compact Cost-Effective
Mechanical Specifications
High Power Industrial Nanosecond UV Laser
DAGGER-15
APPLICATIONS
Flex circuit cutting and machining
Microvia drilling of printed circuit boards
Thin film metal (copper, gold etc..) cutting, patterning, marking and machining
LED processing and production
Si wafer scribing, cutting and dicing
Indium-Tin Oxide (ITO) removal and patterning on glass and plastic
DAGGER-15 is the best of all low cost-of-ownership industrial UV laser with thermally compensated super stable cavity design technology. It offers >15 W output power at 50 kHz with pulse energy over 300 µJ and pulse duration <20 ns. The excellent beam parameter performance, plus their proven reliability, makes Dagger-15 suitable for a wide range of high-precision industrial micromachining, including via drilling, electronic package singulation, silicon wafer sawing and scribbling, transparent material cutting etc..
KEY HIGHLIGHTS
Repetition rate of 40 – 100 kHz
TEM00（M2<1.3)
Pulse width < 20 ns @ 50 kHz
Pulse energy > 300 µJ @ 50 kHz
Compact
RS232 and external GATE control
Assembled in 1000 class clean room
ww
w.e
lixir
ph
oto
nic
s.c
om
H
IGH
PO
WE
R IN
DU
ST
RIA
L F
EM
TO
SE
CO
ND
LA
SE
R
15 W 355 nm High Power Industrial Nanosecond UV Laser
System Specifications
Center Wavelength 355 nm
Pulse Repetition Rate 40 to 100 kHz
Pulse Duration <20 ns @ 50 kHz
Maximum Average Power > 15 W @ 50 kHz
Average Power Stability < 2% rms over 8 hours
Pulse-to-pulse Stability < 3% rms
Spatial Mode TEM00, M2 < 1.3
Beam Divergence < 1.5 mrad (full angle)
1/e2 Beam Diameter ~1.0 mm
Beam Roundness > 90%
Pointing Instability < 50 µrad
Polarization Direction Horizontal
Polarization Ratio > 100:1
Cooling Water-cooling
Ambient Temperature 15 to 30C
Storage Temperature -10 to 50C
Relative Humidity 10% to 80% (non-condensing)
Warm-up Time < 10 minutes
Operating Voltage 85 to 264 V (50/60 Hertz)
DAGGER-15
46708 Lakeview Blvd, Fremont CA 94538, USA | Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
Elixir Photonics follows a policy of continuous product improvement. Specifications are subject to change without notice. Elixir Photonics offers a limited warranty for all DAGGER lasers. For full details of this warranty coverage, please contact Sales Department at [email protected].
Reliable Compact Cost-Effective
HIG
H P
OW
ER
IND
US
TR
IAL F
EM
TO
SE
CO
ND
LA
SE
R
Mechanical Specifications Test Data
High Power Industrial Nanosecond UV Laser
DAGGER-10
DAGGER-10 is the best of all low cost-of-ownership industrial UV laser with thermally compensated super stable cavity design technology. It offers >10 W output power at 50 kHz with pulse energy over 200 µJ and pulse duration <20 ns. The excellent beam parameter performance, plus their proven reliability, makes Dagger-10 suitable for a wide range of high-precision industrial micromachining, including via drilling, electronic package singulation, silicon wafer sawing and scribbling, transparent material cutting etc..
KEY HIGHLIGHTS
Repetition rate of 40 – 100 kHz
TEM00（M2<1.3)
Pulse width < 20 ns @ 50 kHz
Pulse energy > 200 µJ @ 50 kHz
Compact
RS232 and external GATE control
Assembled in 1000 class clean room
ww
w.e
lixir
ph
oto
nic
s.c
om
H
IGH
PO
WE
R IN
DU
ST
RIA
L F
EM
TO
SE
CO
ND
LA
SE
R
APPLICATIONS
Flex circuit cutting and machining
Microvia drilling of printed circuit boards
Thin film metal (copper, gold etc..) cutting, patterning, marking and machining
LED processing and production
Si wafer scribing, cutting and dicing
Indium-Tin Oxide (ITO) removal and patterning on glass and plastic
10 W 355 nm High Power Industrial Nanosecond UV Laser
System Specifications
Center Wavelength 355 nm
Pulse Repetition Rate 40 to 100 kHz
Pulse Duration <20 ns @ 50 kHz
Maximum Average Power > 10 W @ 50 kHz
Average Power Stability < 2% rms over 8 hours
Pulse-to-pulse Stability < 3% rms
Spatial Mode TEM00, M2 < 1.3
Beam Divergence < 1.5 mrad (full angle)
1/e2 Beam Diameter ~1.0 mm
Beam Roundness > 90%
Pointing Instability < 50 µrad
Polarization Direction Horizontal
Polarization Ratio > 100:1
Cooling Water-cooling
Ambient Temperature 15 to 30C
Storage Temperature -10 to 50C
Relative Humidity 10% to 80% (non-condensing)
Warm-up Time < 10 minutes
Operating Voltage 85 to 264 V (50/60 Hertz)
DAGGER-10
Elixir Photonics follows a policy of continuous product improvement. Specifications are subject to change without notice. Elixir Photonics offers a limited warranty for all DAGGER lasers. For full details of this warranty coverage, please contact Sales Department at [email protected].
46708 Lakeview Blvd, Fremont CA 94538, USA | Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
HIG
H P
OW
ER
IND
US
TR
IAL F
EM
TO
SE
CO
ND
LA
SE
R
Reliable Compact Cost-Effective
Mechanical Specifications
Reliable Compact Cost-Effective
NOTES
46708 Lakeview Blvd, Fremont CA 94538, USA Tel: 1-510-687-1910 www.elixirphotonics.com [email protected]
Elixir Photonics Incorporated | 46708 Lakeview Blvd, Fremont CA 94538 USA Tel: 1-510-687-1910 | www.elixirphotonics.com | [email protected]
Reliable Compact Cost-Effective
