FrontPo erFrontPowerFRONT PTO
540 RPMor 1000 RPMor 1000 RPM
Clockwise rotation
Technical features
Oil filOil filterOn the front face
maintenance can be donewithout removing PTO
from the tractor
FrontPower PTO 540 RPM or 1000 RPM
Technical features
540 RPM - 6 splines 1000 RPM - 21 splines 1000 RPM 21 splines
1’’3/8 shaftMatch ISO standard
FrontPower PTO 540 RPM or 1000 RPM
Technical features
Level plug / Drain plugLevel plug / Drain plugOn the front face
easy access for maintenanceeasy access for maintenance
FrontPower PTO 540 RPM or 1000 RPM
Technical features
Permanent informationRotation direction,Rotation direction,nominal speed and
LAFORGE logo are castedin the housing easy identification
FrontPower PTO 540 RPM or 1000 RPM
Reasons for choosing Reasons for choosing LAFORGE
FrontPower PTO
FrontPower PTO 540 RPM or 1000 RPM
M lti di t l t h ithMulti-disc wet clutch withprogressive engagementprogressive engagement
- reliability and durability
- engagement modulation = implement protection= implement protection
FrontPower PTO 540 RPM or 1000 RPM
Heavy-duty components
- continuous rated power:540 RPM = 80 HP1000 RPM = 180 HP
- industry leading durability at rated power
FrontPower PTO 540 RPM or 1000 RPM
Output shaft
St d i t ti t t i i i= user safetyStopped in rotation as soon as tractor engine is running
Free rotation of the shaft when tractor engine is offFree rotation of the shaft when tractor engine is off= ease of spline line up for implement connection
FrontPower PTO 540 RPM or 1000 RPM
Innovative “zero seal” design
- controlled leak rate for lubrication, eliminates seal friction and improves heat dissipation and improves heat dissipation
= better durability of components
= wear reduction, easy to maintain
FrontPower PTO 540 RPM or 1000 RPM
Speed monitoring with speedsensor and control switch in cabsensor and control switch in cab
User safety two-stage switch to avoid accidental start of the PTO
Speed feedback works on any tractor p yconfiguration: consistency of installations
and ease of inventory management
FrontPower PTO 540 RPM or 1000 RPM
Speed monitoring illustratedSpeed monitoring illustratedDifferent lights depending on engine speed
d
g p g g p
Flashing light frequency
nominal engine speed
Engi
ne sp
eed Flashing light frequency
increases when getting closeto the nominal engine speed
under-speed nominal operating speed over-speed Timep p g p p
FrontPower PTO 540 RPM or 1000 RPM
PTO controller PTO controller mounted on the
t hi ldmastershield
ease of installation
FrontPower PTO 540 RPM or 1000 RPM
Flexible
engine couplingg p g
- high durability couplershigh durability couplers= high continuous power capability
= vibration filtration optimized.
= quick installation = available for most modern = quick installation = available for most modern crankshaft pulleys
FrontPower PTO 540 RPM or 1000 RPM