GF Piping Systems
BIG in IndonesiaSee the installation of an ELGEF Plus
1000mm coupler for an underground
pipeline south of Jakarta. page 8
Dual simplicityThe new Signet 9950 Dual Channel
Transmitter enables two measurement
readings in only one transmitter. page 2
Office closuresOur office hours vary during
Christmas, New Year’s and
Chinese New Year. page 10
Issue 10 | December 2016
Conductivity/
Resistivity Sensors
Hydrostatic Level Sensors
Pressure Sensors
Temperature
SensorsPaddlewhell Flow Sensor
Dissolved Oxygen Sensor
PH/ORP Electrode
Insertion M
agmeter
Flow Sensor
pH/ORP Bulb
Electrode
Metalex Paddlewheel
Flow Sensor
Magmeter
Flow Sensor
Frontier
2 Frontier December 2016 Cover story
Dual simplicity9950 Dual Channel Transmitter approaches modularity
The new Signet 9950 Dual Channel Transmitter enables
two measurement readings in only one transmitter.
Eliminating the necessity of multiple single channel
transmitters in applications that require several
measurements and a local display leads to lower costs
and higher convenience.
Relay control with multiple conditionsWith its dual channel capability, you can connect two of the
same sensor measurement types such as flow and flow, or
two different types, such as pH and ORP. Additional versatility
is provided with its capability for multi parameters through
support of the complete line of Signet flow and analytical
sensors, as well as other devices with a 4 to 20mA current
loop output when using the Signet iGo module. Large backlit
dot matrix display illuminates both measurement readings
simultaneously.
The 9950 also provides sophisticated features to support
a variety of functions for complete flexibility. The unit’s
derived functions allow control of relays and current loops
with the sum, difference, or ratio of two of the same kind
measurements. Its multiple relay mode allows relay control
using multiple conditions, while the time based relay functions
enable setting relay activation on a repeating basis in minutes
and on specific days and times during the week.
With the 9950, fewer transmitters are required to achieve the
required result, and without any add on cards or modules.
For detailed information contact us at: [email protected]
Key features: • Independent Dual Channel Multi-Parameter, Flow, pH, ORP,
Conductivity, Resistivity, Pressure, Temperature, Level, Volume, Salinity, Dissolved Oxygen and other (4 to 20 mA)
• Available in two voltage options: 12-32 VDC, ±10%, or 100-240 VAC/12-32 VDC, ±10%
• Options for up to 4 Relays – Dry contact or Solid State
• Optional 2 dry contact with 4 binary inputs providing up to four more sensing points as switch inputs.
• Advanced Boolean Relay Logic
• Derived Functions : Ratio, Difference, Sum, % Rejection, % Recovery
• Onboard Clock and Calendar for Scheduled Events
Dimensions and details:
3 Frontier December 2016 Events
This year’s South
East Asia’s Distributor Meeting took place in Switzerland. Check
out the best moments of the particpants from PT Valvtrol, PT Gapura Fajar
Langgeng and PT Mitra Ikhtiar Simpati from Indonesia, Flamingo Build-Tech
Enterprises from Philippines and Vicchi Engineering from Thailand.
Gruezi
from Switzerland
Assembling a Ball Valve 546: Muhammad Jazuli from PT Gapura Fajar Langgeng Indonesia.
Ophelia and Edy Go (left) witness a pressure
test at our lab test facility.
Fun in the pipe: Photo shooting
in a large diameter PE pipe
Besides GF, the small town of Schaffhausen is famous for the Rhine fall, with 23 meter height the largest plain waterfall of Europe.
Smiling for the camera: All distributors at GF Piping Systems headquarter in Schaffhausen.
Kittipong and Kanokporn Chaipasee (middle, right)
from Vicchi Engineering Thailand attend an iLite
product training in our factory in Sissach.
On the road in SEA
Manila. GF has been invited to
present its innovative products
and technologies by its distributor
Flamingo Tech, who participated at
an exhibition mututally organised
by Philippines water authorities
Maynilad Water Services and Manila
Water. Under the title “Partners for
Growth”, this two day event took
place in October.
***
“Partners for growth“ in Philippines
Utility solutionsin Myanmar Yangon. At the end of October, GF
Piping Systems supported its Burmese
distributor Cinkoon International at the
Myanmar Water exhibition. In Yangon,
the PE ELGEF Plus Electrofusion
system with suiting branch saddle
solutions was showcased, as well
as the Aquasystem PP-R Hot & Cold
Piping System. A highlight has been
the presentation of our colleague
Edwin Sonneveld from Georg Fischer
Waga N.V., who introduced the wide
range couplings MULTI/JOINT at the
Technical Symposium during the
show.
4 Frontier December 2016 Product updates
New dimensions available A big welcome to MULTI/JOINT ® 3000 Plus system in DN425 and DN475With the dimensions DN425 (432 - 464mm) and
DN475 (481 - 513mm), our MULTI/JOINT® 3000 Plus
system has been extended. An advanced,
restraint solution, that fully meets the
increasing market demands. Two new
couplings and two new reduction
couplings were added:
GF has developed an online
Machine Finder. By sharing just
a few parameters as dimension,
application and machine features
you are after, the application will
show you which butt and socket
fusion machines are suitable
for your application, in terms of
diameter range and features. The
identified machines can be filtered
further or re-evaluated by using the
extended search.
Test the finder: http://www.gfps.com/gfmachinefinder
More advantages with new hygiene cap:
Clean: Dust and dirt do not stand a chance; the fitting remains clean from
production to point-of-use, regardless the dimension or version
Safe: The cap reduces the risk of polluting the medium
Simple: The hygiene cap is easy to remove
Durable: The hygiene cap is made of recyclable PP material.
The new dimensions are a valuable extension to
the existing program and can be supplied in various
designs. The bolts, nuts and sealing rings are available in
stainless steel A2 quality (AISI 304) or A4 quality (AISI 316).
Besides this you can choose a restraint or non restraint design
with EPDM or NBR gaskets.
- DN425 (non restraint / restraint)
MULTI/JOINT® 3000/3007 (432 - 464mm)
- DN475 (non restraint / restraint)
MULTI/JOINT® 3000/3007 (481 - 513mm)
- DN425 x DN400 (non restraint / restraint)
MULTI/JOINT® 3100/3107 Plus
(432 - 464 x 392 -433mm)
- DN475 x DN425 (non restraint / restraint)
MULTI/JOINT® 3100/3107 Plus
(481 - 513 x 432 - 464mm)
Find the right machine online New online tool guides you through your welding options
Work clean, safe, simple and durable thanks to the new hygiene cap.
5 Frontier December 2016 Product updates
In a nutshell
iJOINT articles available in d16mmThe 8 most important iJOINT articles
are now also available in d16mm.
These products are obtained through
pre-assembled d20mm fittings with the
new d20-16mm reduction kit.
***
Label your ball valves
Dimension [DN] Dimension [inch] Code Quantity
DN10/15 3⁄8“ – 1/2“
198 807 231 25 sheets with 48 labels
198 807 241 100 sheets with 48 labels
DN20/25 ¾“ – 1“
198 807 232 25 sheets with 24 labels
198 807 242 100 sheets with 24 labels
DN32/40 1 ¼“ – 1 ½“
198 807 233 25 sheets with 18 labels
198 807 243 100 sheets with 18 labels
DN50 2“
198 807 234 25 sheets with 11 labels
198 807 244 100 sheets with 11 labels
Dimension [DN] Dimension [inch] Code Quantity
DN10/15 3⁄8“ – ½“ 198 807 221 10 pc‘s
DN20/25 ¾“ – 1“ 198 807 222 10 pc‘s
DN32/40 1 ¼“ – 1 ½“ 198 807 223 5 pc‘s
DN50 2“ 198 807 224 5 pc‘s
Benefits• Increased safety for piping system and operator • Improved efficiency of operation and maintenance
Specifications• For GF Ball Valve Types 546, 523, 543 und 547• Lever clip material: SAN• Print sheet DIN A4: Polymer foil
Product features • UV-, weather- and chemical resistant• Can be labeled with laser printers or by hand
Perforated print sheet
Transparent lever clips
Limit Switches for Flow Meter improvedThe design of the contact box of the new
limit switches has been improved, so
that it is now much easier to assemble
the cables in to the cable clips. The new
cable clips are positioned on top of the
contact box and no more sideways as
before, which allows a faster and more
comfortable assembling of the cables.
The quality of the sealed reed contact
remains the same. The functionality and
the terminal connection table of the new
limit switches have not changed to the
prior version.
***
Partial change of codes for iFIT and INSTAFLEXIn order to globally comply with the
new, future-oriented provisions of the
European Union (EU Drinking Water
Directive) as implemented in the
ordinance on metal materials issued
by the German Federal Environmental
Agency (UBA), we are currently
changing our entire range of metal
materials. This change will also be
reflected in some of our order codes.
The new material doesn’t affect either
application nor installation.
Old version New version
d cHH
Labeling System
Valve No. 124
Flow direction
Ball Valve No. 1
Ball Valve No. 1
Convert into Print version
Your logo here Waste Water Do not close
Your individual design
Acetylene
Water
Chlorine
Hydrochloric acid
Identify the ball valves in your piping systems clear and easy with the GF Ball Valve Labeling. Whether to comply with standards or for more clarity - you decide how to label.
Water treatment experts from 10
European countries attended the
annual Water Technology Summit
(WTS), that was hosted by GF
Piping Systems for the third time in
Schaffhausen, Switzerland.
Matching from the 2015
United Nations Climate Change
Conference’s goal to restrict global
warming to less than 2°C, this
year’s WTS main topic was how to
support that ambitious goal with new
process technologies and innovative treatment equipment.
The summit, a well established technology and networking
exchange event, was opened by GF Piping Systems’ new
president, Joost Geginat. He
pointed out how important the
role of developed economies is in
reducing greenhouse emissions.
Topics of the following speeches
included osmosis technology in
industrial waste water treatment
and simplification of pre-
treatment steps in desalination
plants by using ceramic flat sheet
membranes.
The total sum of 10 000 CHF
from guest participation will be handed over to the GF Clean
Water foundation in order to support drinking water projects in
remote areas worldwide.
Sustainability for us -and for you
Battle against global warmingWater Treatment experts discuss impact of new technologies and equipment
Joost Geginat (left) and Roland Groebli from GF Piping Systems
GF publishes Sustainability Report 2015 At GF sustainability means acting responsibly as a company for the
long-term, to ensure a continuing success in business in harmony
with the environment and society. The Sustainability Report 2015
informs about GF’s initiatives and measures and illustrates through
three case studies our multifaceted engagement in the area of
sustainability. Moreover, the report gives an overview on the target
achievement of the last five years, and details the sustainability
targets 2020. GF publishes its key sustainability figures annually,
every two years in the form of a comprehensive report. The report
follows the Global Reporting Initiative (GRI 4) standard and is
validated externally.
Part of our business modelSustainability is part and parcel of the GF business model: GF
Piping Systems ensures for its customers pipe networks free of
leaks and contamination. GF Automotive provides
light-weight components which minimize vehicle weight and lower
CO2 emissions. And GF Machining Solutions makes production
processes more economical and efficient with its high-precision
machine tools that can be used to produce more efficient aero
engines and thus help to reduce aircraft fuel consumption.
Needless to say, we embed sustainability in our operations. In this
respect, we further implemented several worldwide sustainability
initiatives which, despite increased sales and a higher production
volume, allowed us to significantly improve key ratios such as
energy, water consumption and CO2 emissions.
Read more about sustainability at GF
For a printed version, please contact us at
Scan the QR code or tap the phone icon
to view the Report online
6 Frontier December 2016 Corporation
7 Frontier December 2016 News
Upcycling for advancedLesson 4: How to build a clothing rack
Zurich. GF goes fashion - this picture of a clothing
rack shows how versatile (and hip!) our traditional
GF fittings can be. This example has been
discovered at a fashion store at the shopping mall
Velo City in Zurich, Switzerland. If you have seen
other creative things that are made of pipes or
fittings, mail a picture to sgp.ps@georgfischer.
com and tell us the story behind!
Helpful tools for your mobile devices
New GF publications
Everything you need to know about our solutions for Ballast Water Treatment and Ballast Systems in one booklet.
12 pages, available in hard copy or as PDF
Contact us at
for your catalogue
enquieriesPipe engineering toolAll key basic data needs for planning pipe systems made by GF Piping
Systems. This tool offers the possibility to determine the data related to
the hydraulics of all pipe systems. Moreover, all media temperature and
assembling data are calculated and made available. Values obtained can be
sent by mail. With the buildt-in QR Code Scanner, additional information can
be quickly located. Available for iOS. App Store name: Georg Fischer - Engineering Tool
Flow calculatorThis mobile application is your on-site planning tool for pipe
diameter and flow velocity calculation. The app gives you the
freedom to select the right dimension when no expert is near
by. The Flow calculator offers you all the functionality you
need to quickly calculate the flow rates, pipe diameter and
velocity.
Available for iOS. App Store name: Georg Fischer - FlowCalc
Selection tool for Signet sensorsEach application is unique, and what fits one application isn’t necessarily
the right fit for another similar application. Therefore, a newly created app
will assist you in selecting the right GF Signet sensors for flow, conductivity
or pH measurements. You can select between US or metric units and can
easily link to datasheets and manuals, in order to help you make your final
selection. Available for Android. Google Play Store name: GF Signet Selection Tool
Selection tool for Signet sensorsThe Signet 9900 Transmitter provides you a
single channel interface for many different
parameters - and this app gives you an idea of
the look and feel of Signet devices. The app is
available in several languages and offers full
insight into the functions of the Signet 9900
Transmitter.
Available for iPad only. App Store name: 9900 Transmitter
GF Piping Systems supports you on the go with a range of apps
A new Product brochure for the new line of iJOINT com-pression fittings is now available.
6 pages, available in hard copy or as PDF
This brochure provides information on ELGEF Plus, the electro-fusion system for pressurised systems.
16 pages, available as PDF
The product catalgoue with GF’s complete Marine Range has been updated and is now available.
544 pages, available in hard copy or as PDF
8 Frontier December 2016 Project Reference I
BIG ideas become real1000mm ELGEF Plus coupler installed
The pipes need to be peeled with GF’s RST 1000 tool. Once coupler and electrofusion cables are adjusted in the correct position, the MSA machine 4.0 activates the actual fusion process.
In Kuningan, at the southern end of Jakarta, the water
service supplier PT. PAM Lyonnaise Jaya (Palyja) is currently
constructing an underground pipeline. Palyia operates water
treatment plants for the processing of raw into clean water,
distribution centers and reservoirs. In early October, GF
supported the final jointing of two already installed HDPE legs
with an ELGEF Plus Coupler DN1000mm. This has been the
largest dimension used from the GF range to date.
Certified trainings and supervising the installation
Palyja, which had no experience with GF products, was
attracted by the easy handling and secure installation of
ELGEF Plus coupler. Installing such a long and large diameter
pipeline, ELGEF Plus was their right choice for peace of mind.
The installation took place at the beginning of October. Some
weeks before, GF Indonesia had demonstrated all advantages
and got all contractors trained and certified to handle the
upcoming fusion process. The installation itself couldn’t have
been more successful, with GF Indonesia and GF Singapore
supervising the installation process on site.
ELGEF Plus electrofusion couplers
are available in the size range
from d20 to d1200mm and join
all PE pressure pipes and spigot
fittings quickly and reliably. Each
electrofusion socket has a smooth
inside surface that allows thorough
and simple removal of possible
on-site contamination.
ELGEF Plus Couplers - The plus in safety
9 Frontier December 2016 Project reference II
Florence on 25 May 2016. About thirty car owners were about to
regret parking in downtown Florence alongside the quay, with a view
of the Ponte Vecchio. Around noon, all of a sudden, a large part of the
embankment collapsed and came crashing down a number of meters.
A leaking cast iron water pipe washed away a massive amount of soil,
causing a giant hole with a swirling water mass, which swallowed the
parked cars and caused an enormous mess.
Water supply within 24 hours by means of a bypass
Within 24 hours the worst mess was cleaned up again and the water
supply for this part of town restored with a bypass. Then it was time to
assess the total damages: it will take a few months before all damages
can be repaired and the embankment can be restored. The water
company in Florence, Publiacqua S.p.A., applies the principle that new
suppliers of materials must go through a tough screening before they
can actually supply anything. Fortunately for the city, employees of GF
Italy had brought the MULTI/JOINT 3000 Plus system to the attention
of Publiacqua S.p.A. a number of times already, so the product had
already been approved for use in the network of Publiacqua S.p.A.
One of GF Piping Systems’ business partners, S.D.M. s.r.l., is located
in Calenzano, near Florence. The company supplies cast iron and PE
fittings and accessories to various gas and water companies. The
owner, Massimo Santini, also owns a transport company with trucks
that can carry 12,5 m long pipes. All of this came in very handy that day.
S.D.M. s.r.l. was contacted almost immediately after the embankment
came down. They got in touch with GF Piping Systems and other
To the rescueWhat a mess! When a giant sink hole built near the Ponte Vecchio in Florence, Italy, swallowing dozens of cars, GF Piping Systems helped out.
suppliers and were able to deliver the required materials
for the bypass in PE with the speed of lightning. The
supply of drinking water to the area was restored within
24 hours.
MULTI/JOINT 3000 Plus: Lifesaver for emergency
This was possible thanks to the local stock of products
at S.D.M. s.r.l. and good relations they have with their
suppliers. Two MULTI/JOINT 3000 Plus DN600 flange
adaptors were immediately supplied from the stock
to Publiacqua S.p.A. GF Italy supplied two additional
DN600 flange adaptors and eight ELGEF electrofusion
couplings d 500 mm very quickly from the GF Piping
Systems distribution centre in Italy. To the water
company of Florence, MULTI/JOINT 3000 Plus was a
lifesaver for this big emergency. The product offered
a true added value to the water company, the city of
Florence, S.D.M. s.r.l. and especially the inhabitants and
tourists of Florence.
10 Frontier December 2016 Miscelleanous
Merry christmas from GF Piping Systems. This picture has been taken during the annual end of the year dinner of GF Piping Systems Singapore in early December.
Office closings For Christmas
From 23 Dec 2016, 12.30 noon,
until 26 Dec 2016. Business operation
will resume on 27 Dec 2016.
For New Year’s From 30 Dec 2016, 12.30 noon,
until 2 Jan 2017. Business operation
will resume on 3 Jan 2017.
For Chinese New Year From 27 Jan 2017, 12.30 noon
until 31 Jan 2017. Business operation
will resume on 1 Feb 2017.
Thank you for your trust in us Letter from Bruno Meier, Head of Business Unit Asia at GF Piping Systems
Dear valued customers
As 2016 comes to an end, I would like to take this opportunity to thank you for the continuous support and trust you have brought to us at GF Piping Systems. On behalf of our teams in Singapore, Malaysia, Indonesia, Philippines and Vietnam, let me assure that serving you always was and always will be an honorable and valuable experience and that we are looking forward to accompany you on future endeavors. We wish you, your families and your co-workers a peaceful holiday season filled with joy and happiness and that 2017 will be a most prosperous and healthy year for you.
Yours sincerely
Bruno Meier
Always on time with Swiss watch “Service” is the correct solution word of the riddle in Frontier Issue 09
Manila. The contribution of Spencer A. Jordan from
Ultrapure Water System in San Pedro City, Philippines,
has been picked at our last draw of Frontier riddle No. 9.
The correct solution word “SERVICE” is based on following
indivudual answers:
1. This piping system is used in KL’s new Four Season
Hotel: Aquasystem
2. 2290 is the type of GF’s new radar ... transmitter:
Level
3. One of GF’s partners to carry out Clean Water
projects: Caritas
4. GF’s new online service guides you through this
product group: Valves
5. In July, GF participated in this exhibition: SIWW
6. COOL-FIT can help to reduce these emissions: CO2
7. GF’s company culture is based on five: Values
Spencer has won a Swiss military watch. Congratulations
from all the team of GF Piping Systems!Our winner Spencer A. Jordan (right), was visited by Renato Pangilinan from GF Piping Systems Philippines to hand over the prize.
Win Power Banks at our holiday SudokuMail your answer until 3 February 2017 to [email protected]
11 Frontier December 2016 Your chance to win
Are you a Sudoko expert? Our holiday quiz will
just be the right challenge for you: Christmas tree,
Orange basket, Fireworks or the GF logo - find
the missing symbol in the blue box and write to
us with the answer, either mail to sg_marketing@
georgfischer.com or by post to our Singapore office
(see address on back page) marked “Frontier
Competition”. Two winners will be determined, each
will receive one Philips Backup power on the Go
10000 mAh. Entries close 5pm on 3 February 2017.
All correct entries will be entered into the draw and
the winners will be selected on Monday, 5 February
2017, 3 pm at George Fischer Pte. Ltd. Singapore.
The winners will be notified by telephone or email.
After three months, if the prize has not been
claimed, we will redraw the prize and notify the
new winners. The winners will be announced in
the next issue of Frontier. Employees of GF and
their immediate families
are not
eligible
for
entry.
Which symbol is missing in the blue box?
GF Piping Systems
SingaporeGeorge Fischer Pte. Ltd.11 Tampines Street 92#04-01/07 Tampines BizhubSingapore 528872Phone +65 6747 0611Fax +65 6747 [email protected]
PhilippinesPhilippines Representative Office (Manila)Phone +63 2571 2365Fax +63 2571 2368
VietnamPhilippines Representative Office (Ho Chi Minh City)Phone +84 8 3948 5784Fax +84 8 3948 5786
IndonesiaPT Georg Fischer IndonesiaKarawang - FactoryJl. Desa Anggadita KlariKarawang Timur41371 Jawa BaratPhone +62 267 432 044Fax +62 267 431 [email protected]
Jakarta - OfficePhone +62 21 2900 8564
MalaysiaGeorge Fischer (M) Sdn. Bhd.No. 14, Jalan Anggerik Mokara 31/50Section 31, Kota Kemuning, 40460Shah Alam, Selangor Darul EhsanPhone +60 3 5122 5585Fax +60 3 5122 5575
Branch Office PenangPhone +60 4658 9682Fax +60 4656 0867
Your contact in South East Asia
Subscription / UnsubscriptionIf you want to subscribe or unsubscribe “Frontier”, please email your details and requestto: [email protected] with “Subscribe” / “Unsubscribe” in the subject line.Frontier is published four times a year. The next issue will be published in March 2017.
Published by:George Fischer Pte. Ltd., 528872 Singapore