Fujifilm Finepix j15fd Manual

7/29/2019 Fujifilm Finepix j15fd Manual

http://slidepdf.com/reader/full/fujifilm-finepix-j15fd-manual 1/116

Beore You Begin

First Steps

Basic Photography and Playback

More on Photography

More on Playback

Movies

Connections

Menus

Technical Notes

Troubleshooting

Appendix

For inormation on related products, visit our website at

http://www.ujiilm.com/products/index.html

BL00814-200(1) E

Owner’s Manual

Thank you or your purchase o this product. This manual describes

how to use your FUJIFILM FinePix J15d digital camera and the sup-

plied sotware. Be sure that you have read and understood its con-

tents beore using the camera.



ii

For Your Saety

IMPORTANT SAFETY INSTRUCTIONS• Read Instructions: All the saety and op-

erating instructions should be read

beore the appliance is operated.• Retain Instructions: The saety and

operating instructions should be

retained or uture reerence.• Heed Warnings: All warnings on the

appliance and in the operating in-structions should be adhered to.

• Follow Instructions: All operating and

use instructions should be ollowed.

InstallationInstallation

Power Sources: This video productshould be operated only rom the

type o power source indicated on

the marking label. I you are not sureo the type o power supply to your

home, consult your appliance dealeror local power company. For video

products intended to operate rom

battery power, or other sources, reerto the operating instructions.

Grounding or Polarization: This videoproduct is equipped with a polar-ized alternating-current line plug (a

plug having one blade wider than

the other). This plug will ft into thepower outlet only one way. This is a

saety eature. I you are unable toinsert the plug ully into the outlet,

try reversing the plug. I the plug

should still ail to ft, contact your

electrician to replace your obsoleteoutlet. Do not deeat the saety pur-pose o the polarized plug.

Alternate Warnings: This video productis equipped with a three-wire ground-

ing-type plug, a plug having a third(grounding) pin. This plug will only ft

into a grounding-type power outlet. This is a saety eature. I you are unable

to insert the plug into the outlet, contact

your electrician to replace your obsolete

outlet. Do not deeat the saety purpose

o the grounding type plug.

Overloading: Do not overload wall out-lets and extension cords as this can

result in a risk o fre or electric shock.

Ventilation: Slots and openings in the

cabinet are provided or ventilation,to ensure reliable operation o the

video product and to protect it romoverheating, and these openings

must not be blocked or covered. The

openings should never be blocked byplacing the video product on a bed,

soa, rug, or other similar surace.

This video product should not beplaced in a built-in installation such

as a bookcase or rack unless proper

ventilation is provided or the manu-acturer’s instructions have been ad-

hered to. This video product shouldnever be placed near or over a radia-

tor or heat register.

Attachments: Do not use attachments

not recommended by the videoproduct manuacturer as they may

cause hazards.

Water and Moisture: Do not use this vid-eo product near water—or example,

near a bath tub, wash bowl, kitchensink, or laundry tub, in a wet basement,

or near a swimming pool, and the like.

Power-Cord Protection: Power-sup-ply cords should be routed so that

they are not likely to be walked on

or pinched by items placed uponor against them, paying particular

attention to cords at plugs, conve-nience receptacles, and the point

where they exit rom the appliance.

Accessories: Do not place this video

product on an unstable cart, stand,tripod, bracket, or table. The video

product may all, causing serious injury to a child or adult, and serious

damage to the appliance. Use only

with a cart, stand, tripod, bracket, ortable recommended by the manuac-

turer, or sold with the video product.

Any mounting o the appliance shouldollow the manuacturer’s instructions,

and should use a mounting accessoryrecommended by the manuacturer.

An appliance and

cart combinationshould be moved

with care. Quick

stops, excessiveorce, and uneven

suraces may cause the appliance andcart combination to overturn.

Antennas Antennas

Outdoor Antenna Grounding: I an

outside antenna or cable system isconnected to the video product, be

sure the antenna or cable system isgrounded so as to provide some pro-

tection against voltage surges and

built-up static charges. Section 810o the National Electrical Code, ANSI/

NFPA No. 70, provides inormationwith respect to proper grounding

o the mast and supporting struc-

ture, grounding o the lead-in wireto an antenna discharge unit, size o

grounding conductors, location o antenna discharge unit, connection

to grounding electrodes, and require-

ments or the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground

Clamp

Electric Service

Equipment

Ground

Clamps

Grounding

Conductors

(NEC SECTION

810-21)

Power Service Grounding

Electrode System (NEC

ART 250. PART H)

AntennaDischarge

Unit (NEC

SECTION

810-20)

Power Lines: An outside antenna sys-

tem should not be located in thevicinity o overhead power lines or



iii

For Your Saety

other electric light or power circuits,

or where it can all into such power

lines or circuits. When installing anoutside antenna system, extreme

care should be taken to keep romtouching such power lines or circuits

as contact with them might be atal.

UseUse

Cleaning: Unplug this video product

rom the wall outlet beore clean-ing. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth

or cleaning.

Object and Liquid Entry : Never push

objects o any kind into this videoproduct through openings as theymay touch dangerous voltage points

or short out parts that could result in a

fre or electric shock. Never spill liquido any kind on the video product.

Lightning: For added protection or

this video product receiver duringa lightning storm, or when it is let

unattended and unused or long pe-

riods o time, unplug it rom the walloutlet and disconnect the antenna

or cable system. This will preventdamage to the video product due to

lightning and power-line surges.

Service Service

Servicing: Do not attempt to service

this video product yoursel as open-ing or removing covers may expose

you to dangerous voltage or otherhazards. Reer all servicing to quali-fed service personnel.

Damage Requiring Service: Unplug this vid-

eo product rom the wall outlet and reer

servicing to qualifed service personnel

under the ollowing conditions:

• When the power-supply cord orplug is damaged.

• I liquid has been spilled, or objects

have allen into the video product.• I the video product has been ex-

posed to rain or water.• I the video product has been dropped

or the cabinet has been damaged.

I the video product does not operatenormally ollow the operating instruc-

tions. Adjust only those controls that are

covered by the operating instructionsas an improper adjustment o other

controls may result in damage andwill oten require extensive work by aqualifed technician to restore the video

product to its normal operation.

When the video product exhibits a

distinct change in perormance—

this indicates a need or service.

Replacement Parts: When replacementparts are required, be sure the service

technician has used replacementparts specifed by the manuacturer

or have the same characteristics asthe original part. Unauthorized sub-

stitutions may result in fre, electric

shock or other hazards.

Safety Check: Upon completion o any ser-

vice or repairs to this video product, ask

the service technician to perorm saetychecks to determine that the video prod-

uct is in proper operating condition.

Be sure to read these notes beore use

Saety Notes• Make sure that you use your camera correctly. Read these saety notes and

your Owner’s Manual careully beore use.• Ater reading these saety notes, store them in a sae place.

About the Icons

The icons shown below are used in this document to indicate the severity o

the injury or damage that can result i the inormation indicated by the iconis ignored and the product is used incorrectly as a result.

WARNING

This icon indicates t hat death or serious injury can result i the inormation

is ignored.

CAUTION

This icon indicates that person al injury or material damage can re sult i t he

inormation is ignored.

The icons shown below are used to indicate the nature o the instructionswhich are to be observed.

Triangular icon s tell you that this in ormation re quires attention (“Import ant”).

Circular icons with a diagonal bar tell you that the action indicated is prohib-

ited (“Prohibited”).

Filled circles with an exclamation mark indicate an action that must be per-ormed (“Required”).

WARNINGWARNING

Unplug

from power

socket

I a problem arises, turn the camera of and remove the battery . Continued use o the

camera when it is emitting smoke, is emitting any unusual odor, or is in any

other abnormal state can cause a fre or electric shock. Contact your FUJIFILM

dealer.

Do not allow water or oreign objects to enter the camera . I water or oreign objects

get inside the camera, turn the camera o and remove the battery. Continued

use o the camera can cause a fre or electric shock. Contact your FUJIFILM

dealer.



iv

For Your Saety

WARNINGWARNING

Do not use in

the bathroom

or shower

Do not use the camera in the bathroom or shower . This can cause a fre or electric

shock.

Do not

disassemble

Never attempt to change or take apart the camera. (Never open the casing.) Do not use the

camera when it has been dropped or the casing is damaged . This can cause a fre or

electric shock. Contact your FUJIFILM dealer.

Do not change, heat or unduly twist or pull the connection cord and do not place heavy ob-

ject s on the connectio n cord . These actions could damage the cord and cause a fre

or electric shock. I the cord is damaged, contact your FUJIFILM dealer.

Do not place the camera on an unstable surace . This can cause the camera to all or

tip over and cause injury.

Never attempt to take pictures while in motion . Do not use the camera while you

are walking or driving a vehicle. This can result in you alling down or beinginvolved in a tra c accident.

Do not touch any metal parts o the camera during a thunderstorm. This can cause an

electric shock due to induced current rom the lightning discharge.

Do not use the battery except as specied . Load the battery as shown by the indi-

cator.

Do not heat, change or take apart the battery. Do not drop or subject the battery to impacts.

Do not store the battery with metallic products. Do not use chargers other than the specied

model to charg e the batter y . Any o these actions can cause the battery to burst or

leak and cause fre or injury as a result.

Use only the battery specied or use with this camera. The use o other power sources

can cause a fre.

I the battery leaks and uid gets in contact with your eyes, skin or clothing, ush the a-

ected area with clean water and seek medical attention or call an emergency number right

away.

Do not use the charger to charge batteries other than those specied here. The supplied

BC-45A battery charger is or use with FUJIFILM NP-45 rechargeable batteries

only. Using the charger to charge conventional batteries or other types o

rechargeable batteries can cause the battery to l eak uid, overheat or burst.

When carrying the battery, install it in a digital camera or keep it in the hard case. When

storin g the b atter y, keep i t in th e hard case. When di scardi ng, cove r the ba tter y termin als

with insulation tape. Contact with other metallic objects or battery could cause

the battery to ignite or burst.

WARNINGWARNINGKeep memory cards out o the reach o small children . Because memory cards are

small, they can be swallowed by children. Be sure to store memory cards out

o the reach o small children. I a child swallows a memory card, seek medical

attention or call an emergency number.

CAUTIONCAUTIONDo not use this camera in locations afected by oil umes, steam, humidity or dust . This can

cause a fre or electric shock.

Do not leave this camera in places subject to extremely high temperatures . Do not leave

the camera in locations such as a sealed vehicle or in direct sunlight. This

can cause a fre.

Keep out o the reach o small children. This product could cause injury in the hands

o a child.

Do not place heavy objects on the camera . This can cause the heavy object to tipover or all and cause injury.

Do not cover or wrap the camera in a cloth or blanket . This can cause heat to build up

and distort the casing or cause a fre.

When you are cleaning the camera or you do not plan to use the camera or an extended pe-

riod, remove t he batte ry . Failure to do so can cause a fre or electric shock.

When charging ends, unplug the charger rom the power socket . Leaving the charger

plugged into the power socket c an cause a fre.

Using a ash too close to a person’s eyes may temporarily afect the eyesight . Take par-

ticular care when photographing inants and young children.

When a memory card is removed, the card could come out o the slot too quickly. Use your nger to hold it and gently release the card.

Request regular internal testing and cleaning or your camera. Build-up o dust in your

camera can cause a fre or electric shock. Contact your FUJIFILM dealer to

request internal cleaning every two years. Please note that this service is not

ree o charge.



v

For Your Saety

The Battery and Power Supply

The ollowing describes the proper

use o the battery and how toprolong its lie. Incorrect use can

shorten battery lie or cause leakage,

overheating, fre, or explosion.

The battery is not charged at ship-

ment. Charge the battery beore

use. Keep the battery in its casewhen not in use.

Notes on the Battery

The battery gradually loses its chargewhen not in use. Charge the battery

one or two days beore use.

Battery lie can be extended by turn-

ing the camera o when not in use.

Battery capacity decreases at low tem-

peratures; a depleted battery may not

unction at when cold. Keep a ullycharged spare battery in a warm place

and exchange as necessary, or keepthe battery in your pocket or other

warm place and insert it in the camera

only when shooting. Do not place thebattery in direct contact with hand

warmers or other heating devices.

Charging the Battery

Charge the battery in the supplied bat-

tery charger (pg. 4). Charging times

will increase at ambient temperaturesbelow +10 °C (+50 °F) or above +35 °C

(+95 °F). Do not attempt to charge thebattery at temperatures above 40 °C

(+104 °F); at temperatures below 0 °C(+32 °F), the battery will not charge.

Do not attempt to recharge a ully

charged battery. The battery does

not however need to be ully dis-charged beore charging.

The battery may be warm to thetouch immediately ater charging oruse. This is normal.

Battery Lie

At normal temperatures, the batterycan be recharged about 300 times.

A noticeable decrease in the length

o time the battery will hold a chargeindicates that it has reached the end

o its service lie and should be re-

placed.

Storage

Perormance may be impaired i the

battery is let unused or extendedperiods when ully charged. Run the

battery at beore storing it.

I the camera will not be used or anextended period, remove the bat-

tery and store it in a dry place with

an ambient temperature o rom+15 °C to +25 °C (+59 °F to +77 °F). Do

not store in locations exposed to ex-tremes o temperature.

Cautions: Handling the Battery

• Do not transport or store withmetal objects such as necklaces or

hairpins.

• Do not expose to ame or heat.• Do not disassemble or modiy.

• Use with designated chargers only.• Dispose o used batteries promptly.

• Do not drop or subject to strong

physical shocks.

• Do not expose to water.• Keep the terminals clean.

• The battery and camera body may

become warm to the touch aterextended use. This is normal.

Using the Camera

To ensure that images are recorded

correctly, do not subject the camera

to impact or physical shocks whileimages are being recorded.

Electrical Intererence

This camera may interere with hos-pital or aviation equipment. Consult

with hospital or airline sta beore

using the camera in a hospital or onan aircrat.

Liquid Crystal

In the event that the monitor is dam-aged, care should be taken to avoid

contact with liquid crystal. Take the

urgent action indicated should anyo the ollowing situations arise:

• I liquid crystal comes in contact with

your skin, clean the area with a cloth

and then wash thoroughly with

soap and running water.• I liquid crystal enters your eyes, ush

the aected eye with clean wateror at least 15 minutes and then

seek medical assistance.

• I liquid crystal is swallowed, rinseyour mouth thoroughly with water.

Drink large quantities o water and

induce vomiting, then seek medi-

cal assistance.

Take Test Shots

Beore taking photographs on impor-

tant occasions (such as at weddingsor beore taking the camera on a trip),take a test shot and view the result in

the monitor to ensure that the cam-era is unctioning normally. FUJIFILM

Corporation can not accept liability

or damages or lost profts incurredas a result o product malunction.



vi

For Your Saety

To prevent fre or shock hazard, do not expose the unit to rain or moisture.

Please read the “Saety Notes” (pages iii–v) and make sure you understand

them beore using the camera.

Perchlorate Material—special handling may apply. See http://www.dtsc.

ca.gov/hazardouswaste/perchlorate.

For Customers in the U.S.A.For Customers in the U.S.A.

Tested To Comply With FCC StandardsFOR HOME OR OFFICE USE

FCC Statement

This device complies with Par t 15 o the FCC Rules. Operation is subjec t to

the ollowing two conditions: (1) This device may not cause harmul interer-

ence, and (2) this device must accept any intererence received, includingintererence that may cause undesired operation.

CAUTION

This equipment has been tested and ound to comply with the limits or a

Class B digital device, pursuant to Part 15 o the FCC Rules. These limits aredesigned to provide reasonable protection against harmul intererence in

a residential installation. This equipment generates, uses, and can radiate

radio requency energy and, i not installed and used in accordance withthe instructions, may cause harmul intererence to radio communications.

However, there is no guarantee that intererence will not occur in a particu-

lar installation. I this equipment does cause harmul intererence to radio ortelevision reception, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the intererence by oneor more o the ollowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent rom that to

which the receiver is connected.• Consult the dealer or an experienced radio/TV technician or help.

You are cautioned that any changes or modifcations not expressly approved

in this manual could void the user’s authority to operate the equipment.

Notes on the Grant

To comply with Part 15 o the FCC Rules, this product must be used with a

FUJIFILM-specifed errite-core A/V cable, USB cable, and DC supply cord.

For Customers in CanadaFor Customers in Canada

CAUTION: This Class B digital apparatus complies with Canadian ICES-003.

EC Declaration of ConformityEC Declaration o Conormity

WeName: FUJIFILM Electronic Imaging Europe GmbHAddress: Benzstrasse 2

47533 Kleve, Germanydeclare that the product

Product Name: FUJIFILM DIGITAL CAMER A FinePix J15d

Manuacturer’s Name: FUJIFILM CorporationManuacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO,

107-0052 JAPAN

conorms to the ollowing Standards:Saety: EN60065: 2002 + A1EMC: EN55022: 1998 + A1: 2000 + A2: 2003 Class B

EN55024: 1998 + A1: 2001 + A2: 2003

EN61000-3-2: 2000 + A2: 2005EN61000-3-3: 1995 + A1: 2001 + A2: 2005

ollowing the provision o the EMC Directive (2004/108/EC) and Low Volt-

age Directive (2006/95/EC).

Kle ve, Germany August 1, 20 08

Place Date Signature, Managing Director

NOTICES



vii

For Your Saety

Disposal of Electrical and Electronic Equipment in Private HouseholdsDisposal o Electrical and Electronic Equipment in Private Households

Disposal of used Electrical & Electronic Equipment (Applicable in the European Union ,Disposal o used Electrical & Electronic Equipment (Applicable in the European Union ,

Norway, Iceland and Liechtenstein)Norway, Iceland and Liechtenstein)

This symbol on the product , or in the manual and in the

warranty, and/or on its packaging indicates that this prod-

uct shall not be treated as household waste.

Instead it should be taken to an applicable collection pointor the recycling o electrical and electronic equipment.

By ensuring this product is disposed o correctly, you will

help prevent potential negative consequences to the en-vironment and human health, which could otherwise be

caused by inappropriate waste handling o this product.

This symbol on the batteries or accumulators indicates thatthose batteries shall not be treated as Household waste.

I your equipment contains easy removable batteries or ac-

cumulators please dispose these separately according toyour local requirements.

The recycling o materials will help to conserve natural resources . For more

detailed inormation about recycling this product, please contact your localcity o ce, your household waste disposal service or the shop where you

purchased the product.

In Countries Outside the European Union, Norway, Iceland and Liechtenstein:I you wish to discard this product including the batteries or accumula-tors, please contact your local authorities and ask or the correct way o

disposal.

Notes on CopyrightNotes on Copyright

Unless intended solely or personal use, images recorded using your digitalcamera system cannot be used in ways that inringe copyright laws with-

out the consent o the owner. Note that some restrictions apply to the

photographing o stage perormances, entertainments, and exhibits, evenwhen intended purely or personal use. Users are also asked to note that

the transer o memory cards containing images or data protected undercopyright laws is only permissible within the restrictions imposed by those

copyright laws.

Trademark InformationTrademark Inormation

and xD-Pic ture Card are trademarks o FUJIFILM Corporation. Ma-

cintosh and Mac OS are trademarks o Apple Inc. in the U.S.A. and other

countries. Microso t, Windows, the Windows logo, Windows Vista and theWindows Vista logo are trademarks or registered trademarks o Microsot

Corporation in the United States and/or other countries. “Windows” is anabbreviation used in reerence to the Microsot Windows operating system.

Adobe and Adobe Reader are either trademarks or registered trademarks

o Adobe Systems Incorporated in the U.S.A. and/or other countries. TheSDHC logo is a trademark.

Note: The “Designed or Microsot® Windows® XP” and “CERTIFIED FOR Windows

Vista™” logos apply only to the camera and camera hardware driver.



viii

Camera Q & A

Find items by task.

Camera SetupCamera Setup

QuestionQuestion Key phraseKey phrase See pageSee page

How do I set the camera clock? Date and time 12Can I set the clock to local time when I travel? Time dierence 76

How do I keep the monitor rom turning o automatically? Auto power o 75

How do I stop the camera beeping and clicking? Operation and shutter volume 71

What are the parts o the camera called? Parts o the camera 2

What do the icons in the monitor mean? Monitor 3

How do I use the menus? Menus 54

What’s behind that ashing icon or error message in the monitor? Messages and displays 86How much charge is let in the battery? Battery level 13

Taking PicturesTaking Pictures


How many pictures can I take? Memory capacity 92

Is there a quick and easy way to take snapshots? AUTO mode 13

How can I make good portraits? Intelligent Face Detection 18Is there a simple way to adjust settings or dierent scenes? Shooting mode 28

How do I shoot close-ups? Close-ups (macro mode) 23

How do I keep the ash rom fring?

Flash mode 24How do I stop my subjects’ eyes glowing red when I use the ash?

How do I “fll-in” shadows on back-lit subjects?

How do I take a group portrait that includes the photographer? Sel-timer mode 26

How do I rame pictures with the subject o to one side? Focus lock 21How do I shoot movies? Recording movies 37



ix

Camera Q & A

Viewing PicturesViewing Pictures


How do I view my pictures? Single-rame playback 32

How do I get rid o unwanted pictures? Deleting pictures 17How do I delete a lot o pictures at once? Erase 35

Can I zoom in on pictures during playback? Playback zoom 33

How do I view a lot o pictures at once? Multi-rame playback 33

How do I view all pictures taken on the same day? Sort by date 34

Can I protect my pictures rom accidental deletion? Protect 65

Can I hide the icons in the monitor when viewing my pictures? Choosing a display ormat 32

How do I view my pictures on TV? Viewing pictures on TV 40

Sharing PicturesSharing Pictures


Can I print pictures on my home printer? Printing pictures 41

Can I copy my pictures to my computer? Viewing pictures on a computer 47



x

For Your Saety ...................... ....................... ....................... ............. ii

IMPORTANT SAFETY INSTRUCTIONS ................... ................... ii

Saety Notes ....................................................................................iii

NOTICES ............................................................................................vi

Camera Q & A..................................................................................viiiAbout This Manual........................................................................xii

Before You BegiBeore You Beginn

Introduction.................... ....................... ....................... ..................... 1

Symbols and Conventions ..........................................................1

Supplied Accessories ....................................................................1

Parts o the Camera .......................................................................2

The Monitor ..................... ...................... ....................... ................. 3First StepFirst Stepss

Charging the Battery ..................... ....................... ....................... .. 4

Inserting the Battery...................... ....................... ....................... .. 6

Inserting a Memory Card ..................... ....................... ................. 8

Turning the Camera on and Of ...............................................11

Shooting Mode .............................................................................11

Playback Mode ..............................................................................11

Basic Setup .......................................................................................12

Basic Photography and PlaybacBasic Photography and Playbackk

Taking Pictures in AUTO Mode ................................................13

Viewing Pictures ............................................................................17

More on PhotographMore on Photographyy

Intelligent Face Detection and Red-Eye Removal ..........18

Focus Lock ........................................................................................21

G Close-ups (Macro Mode) ......................................................23

T Using the Flash...........................................................................24

F Using the Sel-Timer ...............................................................26

Shooting Mode ...............................................................................28

Selecting a Shooting Mode......................................................28

Shooting Modes ...........................................................................29

More on PlaybacMore on Playbackk

Playback Options...........................................................................32

Playback Zoom ..............................................................................33Multi-Frame Playback .................................................................33

Sort by Date ....................................................................................34

IDeleting Pictures .....................................................................35

MovieMoviess

A Recording Movies ...................................................................37

H Viewing Movies .......................................................................39

ConnectionConnectionssViewing Pictures on TV ...............................................................40

Printing Pictures via USB ...........................................................41

Connecting the Camera ............................................................41

Printing Selected Pictures ........................................................41

Printing the DPOF Print Order ................................................42

Creating a DPOF Print Order ....................................................44

Viewing Pictures on a Computer............................................47

Installing FinePixViewer ............................................................47Connecting the Camera ............................................................52

Table o Contents



xi

Table o Contents

MenuMenuss

The Shooting Menu ......................................................................54

Using the Shooting Menu .........................................................54

Shooting Menu Options ............................................................55

B ISO .............................................................................................56

CQUALITY ..................................................................................57

D EXP. COMPENSATION .................... ...................... ...............58

EWHITE BALANCE ..................................................................59

G CONTINUOUS ........................................................................60

The Playback Menu.......................................................................61

Using the Playback Menu .........................................................61

Playback Menu Options .............................................................62

U RED EYE REMOVAL ..............................................................63J SLIDE SHOW ..........................................................................64

L PROTECT .................................................................................65

M COPY .........................................................................................66

N IMAGE ROTATE ..................... ....................... ...................... ....68

O TRIMMING ..............................................................................69

The Setup Menu .............................................................................70

Using the Setup Menu ...............................................................70

Setup Menu Options ...................................................................71a IMAGE DISP. ..........................................................................72

b FRAME NO. ............................................................................73

d DIGITAL ZOOM ....................................................................74

e LCD POWER SAVE ...............................................................74

i PLAYBACK VOLUME ........................ ......................... .......... 74

j LCD BRIGHTNESS ................................................................74

k FORMAT..................................................................................75

m AUTO POWER OFF ..............................................................75

n TIME DIFFERENCE ...............................................................76

Technical NoteTechnical Notess

Optional Accessories ...................................................................77

Accessories rom FUJIFILM .......................................................78

Caring or the Camera .................................................................79

TroubleshootinTroubleshootingg

Troubleshooting ............................................................................80

Warning Messages and Displays ............................................86

AppendiAppendixx

Glossary .............................................................................................90

Flash Mode and Shooting Mode ............................................91

Internal Memory/Memory Card Capacity ..........................92Specications..................................................................................93

FUJIFILM Digital Camera Worldwide Network ............. 100



xii

About This Manual

Beore using your camera, read this manual and the warnings on pages ii–vii. For inormation on spe-

cifc topics, consult the sources below.

✔✔ TroubleshootingTroubleshooting ............................................................................................pg. 80 pg. 80

Having a specifc problem with the camera?

Find the answer here.

✔✔ GlossaryGlossary ....................................................................................................................pg. 90 pg. 90

The meanings o some technical terms may be

ound here.

✔✔ Table of ContentsTable o Contents .............................................................................................. pg. x pg. x

The “Table o Contents” gives an overview o the

entire manual. The principal camera operations

are listed here.

✔✔ Warning Messages and DisplaysWarning Messages and Displays ..............................................pg. 86 pg. 86

Find out what’s behind that ashing icon or error

message in the monitor.

✔✔ Camera Q & ACamera Q & A ....................................................................................................pg. viii pg. viii

Know what you want to do but don’t know the

name or it? Find the answer in “Camera Q & A.”

Memory Cards

Pictures can be stored in the camera’s internal memory or on optional xD-Picture Cards and SD and SDHC

memory cards. In this manual, both xD-Picture Cards and SD memory cards are reerred to as “memory cards.”For more inormation, see page 8.



1

B

ef or eY o u B e gi n

Introduction

Symbols and Conventions Symbols and Conventions

The ollowing symbols are used in this manual:

3 Caution: This inormation should be read beore use to ensure correct operation.

1 Note: Points to note when using the camera.

2 Tip: Additional inormation that may be helpul when using the camera.

Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the

monitor display may be simplifed or explanatory purposes.

Supplied Accessories Supplied Accessories

The ollowing items are included with the camera:

or

FinePix sotware CD

( IMPORTANT : read

license agreement

on the last page o

this manual beore

opening)

A/V cable

NP-45 rechargeable

battery

BC-45A battery charger (with

power cable or built-in plug)

USB cable

Attaching the Strap Owner’s Manual

(this manual)Attach the strap

as shown.Sot case Strap



2

Introduction

Parts of the CameraParts of the Camera

For more inormation, reer to the page listed to the right o each item.

16 Tripod mount

17 Speaker ...........................................................39

18 Battery chamber ......................................... 6

19 Battery latch .................................................. 620 Memory card slot ....................................... 9

9 Indicator lamp ............................................16

10 W (zoom out) button .............................14

11 T (zoom in) button ...................................14

12 H

(playback) button ............................3213 Strap eyelet .................................................... 1

14 Connector or USB cable ............. 41, 52

Connector or A/V cable .....................40

15 Battery-chamber cover .......................... 6

1 Shutter button ...................................15–16

2 J button .........................................11

3 Flash ..................................................................24

4 Sel-timer lamp ..........................................275 Microphone .................................................37

6 Lens and lens cover ................................11

7 Monitor ............................................................. 3

8 DISP (display)/ BACK button .......... 15, 32

1

6

4

32

5

7

8 9 10 11

13

14

12

1517 16

18

1920

Selector button

MENU/OK button

(pg. 12)

Move cursor let

G (macro)

button (pg. 23)

Move cursor right

T (ash) button

(pg. 24)

Move cursor up

K (monitor brightness)

button (see below)

I (delete) button (pg. 17)

Move cursor down

F (sel-timer) button (pg. 26)

2 Monitor Brightness

Pressing theK button briey increases monitor brightness, making the display easier to see in bright light. Nor-

mal brightness is restored when a photograph is taken.



3

B

ef or eY o u B e gi n

Introduction

The MonitorThe Monitor

The ollowing indicators may appear in the monitor during shooting and playback:

■■ Shooting Shooting

2

2 331-

1

ISO 100ISO 100

22

250250 F3.3F3.3

NN

10:00 AM10:00 AM2/31/205012/31/205012/31/2050

12

11

13

15

14

16

17

18

6

12345

7

8

9

10

*

* q: Indicates that no memory card is inserted

and that pictures will be stored in the camera’s

internal memory (pg. 8).

11 Quality ........................................... 37, 57

12 Number o exposures

remaining ............................................92

13 Sensitivity ...........................................56

14 Focus warning .................................15

15 Blur warning ......................................24

16 Bright monitor indicator ..............2

17 Internal memory indicator*

.......818 Exposure compensation .......... 58

1 White balance ..................................59

2 Sel timer indicator ........................26

3 Macro (close-up) mode............. 23

4 Flash mode.........................................24

5 Intelligent Face Detection

indicator ...............................................18

6 Shooting mode ...............................28

7 Battery level .......................................138 Continuous mode ........................60

9 Focus rame .......................................15

10 Date and time...................................12

■■ PlaybackPlayback

10:00 AM10:00 AM2/31/205012/31/205012/31/2050

ISO 100ISO 100

100-0001100-0001

NN

250250 F3.3F3.3 22331-1

7

6

5

1234 1 Protected image .............................65

2 DPOF print indicator ....................45

3 Red-eye removal indicator ......634 Intelligent Face Detection

indicator .......................................18, 63

5 Playback mode indicator ..........32

6 Git image ...........................................32

7 Frame number ................................ 73



F i r s t S t e p s

4


The battery is not charged at shipment. Charge the battery beore use.

1 Place the battery in the charger.

Insert the battery into the supplied BC-45A

battery charger as shown, making sure thatthe battery is in the correct orientation. The

BC-45A comes in one o two types, depend-

ing on the country or region o sale: one with

a built-in plug that plugs directly into the

power outlet (A), and another that connects

to the power outlet via a power cable (B).

NP-45 rechargeable battery

Terminals

Arrow

BC-45A battery charger

(type B)


(type A)

2 Plug the charger in.

Plug the charger into a power outlet. The

red charging indicator will light.

Type A Type B

The Charging Indicator

The charging indicator shows battery charge

status as ollows:

Charging indicatorCharging indicator Battery statusBattery status ActionAction

O

Battery not

inserted.

Insert the

battery.

Battery ullycharged.

Remove thebattery.

Glows redBattery

charging.—

Blinks red Battery ault.

Unplug the

charger and

remove the

battery.



F i r s t S t e p s

5


3 Charge the battery.

Charging is complete when the charging in-

dicator turns o. A ully exhausted battery

takes about 100 minutes to charge.

3 Cautions: Caring or the Battery

• Do not a x stickers or other objects to the battery.

Failure to observe this precaution could make it im-

possible to remove the battery rom the camera.• Do not short the battery terminals. The battery could

overheat.

• Read the cautions on page v.

• Use only NP-45 batteries. Failure to observe this pre-

caution could result in product malunction.

• Do not remove the labels rom the battery or attempt

to split or peel the outer casing.

• The battery gradually loses its charge when not inuse. Charge the battery one or two days beore use.

3 Cautions: Using the Battery Charger

• Unplug the charger when it is not in use.

• Remove dirt rom the battery terminals with a clean,

dry cloth. Failure to observe this precaution could

prevent the battery rom charging.

• Charging times increase at low temperatures.



6

Inserting the Battery

Ater charging the battery, insert it in the camera as described below.

1 Open the battery-chamber cover.

1Note

Be sure the camera is o beore opening the bat-tery-chamber cover.

3 Cautions

• Do not open the battery-chamber cover when

the camera is on. Failure to observe this pre-

caution could result in damage to image fles or

memory cards.

• Do not use excessive orce when handling thebattery-chamber cover.

2 Insert the battery.

Align the orange stripe on the battery with

the orange arrow on the camera and slidethe battery into the camera, pressing the

battery latch in the direction shown below.

Confrm that the battery is securely latched.

Battery latch

Orange stripe

Orange arrow

3 Caution

Insert the battery in the correct orientation. Do

NOT use orce or attempt to insert the battery up-

side down or backwards.

i h B



F i r s t S t e p s

7

Inserting the Battery

3 Close the battery-chamber cover. Removing the Battery

Ater turning the camera o, open the battery-cham-

ber cover, press the battery latch to the side, and slide

the battery out o the camera as shown.

Battery latch

3 Caution Turn the camera o beore removing the battery.

I i M C d



8

Inserting a Memory Card

Although the camera can store pictures in internal memory, optional xD-Picture Cards or SD memory

cards can be used to store additional pictures.

When no memory card is inserted, q appears in the monitor and internal memory is used or recording

and playback. Note that because camera malunction could cause internal memory to become cor-rupted, the pictures in internal memory should periodically be transerred to a computer and saved on

the computer hard disk or on removable media such as CDs or DVDs. The pictures in internal memory

can also be copied to a memory card (see page 66). To prevent internal memory rom becoming ull,

be sure to delete pictures when they are no longer needed.

When a memory card is inserted as described below, the card will be used or recording and playback.

■■ Compatible Memory CardsCompatible Memory Cards xD-Picture Cards and SanDisk SD and SDHC memory cards have been tested and approved or use in

the J15d. A complete list o approved memory cards is available at http://www.ujiilm.com/products/

digital_cameras/index.html . Operation is not guaranteed with other cards. The camera can not be used

with multimedia cards.

3 Caution

Memory cards can be locked, making it impossible to ormat the card or to record or deleteimages. Beore inserting a memory card, slide the write-protect switch to the unlocked posi-

tion.

Write-protectWrite-protect

switchswitch




F i r s t S t e p s

9


■■ Inserting a Memory CardInserting a Memory Card

1 Open the battery-chamber cover.

2Insert the memory card.

Holding the memory card in the orientationshown below, slide it all the way in.

Be sure card is in cor-

rect orientation; do not

insert at an angle or use

orce. Illustration shows

xD-Picture Card .

3 Close the battery-chamber cover.

Removing Memory Cards

Press the card in and then re-

lease it slowly. The card cannow be removed by hand.

3 Cautions

• The memory card may spring out i you remove

your fnger immediately ater pushing the card in.

• Memory cards may be warm to the touch ater be-ing removed rom the camera. This is normal and

does not indicate a malunction.




10


3 Cautions

• Format memory cards beore frst use, and be sure to reormat all memory cards ater using them in a computer

or other device. For more inormation on ormatting memory cards, see page 75.

• Memory cards are small and can be swallowed; keep out o reach o children. I a child swallows a memory card,seek medical assistance immediately.

• Do not use miniSD or microSD adapters that expose the back o the card. Failure to observe

this precaution may cause damage or malunction. Adapters that are larger or smaller than the

standard dimensions o an SD card may not eject normally; i the card does not eject, take the

camera to an authorized service representative. Do not orcibly remove the card.

• Do not turn the camera o or remove the memory card while the memory card is being ormatted or data are

being recorded to or deleted rom the card. Failure to observe this precaution could damage the card.

• Do not a x labels to memory cards. Peeling labels can cause camera malunction.• FUJIFILM xD-Picture Cards are recommended. Results can not be guaranteed with xD-Picture Cards rom other

manuacturers. The camera can be used with both type M and type H xD-Picture Cards; note, however, that

type H cards are not compatible with the optional DPC-UD1 xD-Picture Card USB drive. The card type can be

determined rom the model number: or example, “DPC-M2GB” indicates a type M card.

• Movie recording may be interrupted with some types o memory card.

• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the

repairer will be able to view pictures in internal memory.• Formatting a memory card or internal memory in the camera creates a older in which pictures are stored. Do

not rename or delete this older or use a computer or other device to edit, delete, or rename image fles. Always

use the camera to delete pictures rom memory cards and internal memory; beore editing or renaming fles,

copy them to a computer and edit or rename the copies, not the originals.

Turning the Camera on and Of



F i r s t S t e p s

11

Turning the Camera on and Of

Shooting Mode Shooting Mode

Press theJ button to turn the camera on.

The lens will extend and the lens cover will open.

PressJ again to turn the camera o.

2 Tip: Switching to Playback ModePress theH button to start playback. Press the shutter

button halway to return to shooting mode.

3 Caution

Pictures can be aected by fngerprints and other

marks on the lens. Keep the lens clean.

Playback ModePlayback Mode

To turn the camera on and begin playback, press

theH button or about a second.

Press theH button again to turn the camera o.

2 Tip: Switching to Shooting Mode To exit to shooting mode, press the shutter button

halway. Press theH button to return to playback.

2 Tip: Auto Power Of

The monitor will dim to save power i no operations are perormed or about eight seconds in shooting mode.

Full brightness can be restored by operating any o the camera controls. The camera will turn o automatically i

no operations are perormed or the length o time selected in the AUTO POWER OFF menu (see page 75). Toturn the camera on, press theJ button or press theH button or about a second.

Basic Setup



12

Basic Setup

A language-selection dialog is displayed the frst time the camera is turned on. Set up the camera as

described below (or inormation on resetting the clock or changing languages, see page 70).

1 Choose a language.

SET NO

START MENU

1.1 Press the selector up, down,

let, or right to highlight a lan-

guage.

1.2 Press MENU/OK.

2 Set the date and time.

SET NO

DATE / TIME NOT SET

2010

2009

2007

2006

20081 / 1 12 :00

AM

MM /DD /YY

2.1 Press the selector let or right

to highlight the year, month,

day, hour, or minute and press

up or down to change. To change the or-

der in which the year, month, and day are

displayed, highlight the date ormat and

press the selector up or down.

2.2 Press MENU/OK.

2 Tip: The Camera Clock

I the battery is removed or an extended period, the camera clock will be reset and the language-selection dialog

will be displayed when the camera is turned on. I the battery is let in the camera or about 30 minutes, the bat-tery can be removed or about 2 hours without resetting the clock or language selection.

Taking Pictures in AUTO Mode



13

B a s i c P h

o t o gr a ph y an d P l a y

b a c k


This section describes how to take pictures in AUTO mode.

1 Turn the camera on.

Press theJ button to turn the camera

on.

2Tip: Intelligent Face Detection The frst time the camera is turned on, Intelligent Face

Detection is automatically activated and the camera is

optimized or taking portrait photographs. For more

inormation on using Intelligent Face Detection, see

page 18.

2 Check the battery level.

Check the battery level in the monitor.

q w er

IndicatorIndicator DescriptionDescription

q (white)Battery partially discharged.

w (white) Battery more than hal discharged.

e (red) Low battery. Charge as soon as pos-

sible.

r (blinks red) Battery exhausted. Turn camera o

and charge battery.




14

g

3 Frame the picture.

Position the main subject in the ocus area

and use the zoom buttons to rame the pic-

ture in the monitor.

Zoom in up to 3 × using

optical zoom, or use digi-

tal zoom (pg. 74) to zoom

in closer.

AUTOAUTO

Press W to zoom out Press T to zoom in

Zoom indicator

Holding the Camera

Hold the camera steady

with both hands and brace

your elbows against yoursides. Shaking or unsteady

hands can blur your shots.

To prevent pictures that are

out o ocus or too dark (un-

derexposed), keep your fn-

gers and other objects awayrom the lens and ash.

2 Tip: Focus Lock

Use ocus lock (pg. 21) to ocus on subjects that are not in the ocus rame.




15

B a s i c P h

o t o gr a ph y an d P l a y

b a c k

g

The Framing Grid

To display a raming grid or to view or hide other indi-

cators in the monitor, press the DISP/BACK button.

AUTO

AUTO

Indicators

displayed

Indicators

hidden

Framing grid

displayed

To use the raming grid, position the main subject at

the intersection o two lines or align one o the hori-

zontal lines with the horizon. Use ocus lock (pg. 21)

to ocus on subjects that will not be in the center o

the rame in the fnal photograph.

4 Focus.

Press the shutter button halway to ocus on

the main subject in the ocus rame.

AUTO

1/2501/250 F3.3F3.3

Focus rame

Press

halway

Camera selects small

ocus rame and

ocuses on subject

I the camera is able to ocus, it will beep twice

and the indicator lamp will glow green.

I the camera is unable to ocus, af indicator

will appear in the monitor, and the indicator

lamp will blink green. Change the composi-

tion or use ocus lock (pg. 21).

1Note

The lens may make a noise when the camera ocuses.

This is normal.




16

5 Shoot.

Smoothly press the shutter button

the rest o the way down to take

the picture.2 Tip: The Shutter Button

The shutter button has two

positions. Pressing the shutter

button halway (q) sets ocus

and exposure; to shoot, press

the shutter button the rest o

the way down (w).

1Note

I the subject is poorly lit, the ash may fre when the

picture is taken. To take pictures without the ash,

choose another ash mode (pg. 24).

The Indicator Lamp

Indicator lamp

The indicator lamp shows camera status as ollows:

Indicator lampIndicator lamp Camera statusCamera status

Glows green Focus locked.

Blinks green Camera unable to ocus or picturemay be blurred. Picture can be taken.

Glows

orange

Recording pictures. No additional

pictures can be taken at this time.

Blinks orangeFlash charging; ash will not fre when

picture is taken.

Blinks red

Lens or memory error (internal mem-

ory or memory card ull or not ormat-ted, ormat error, or other memory

error).

2 Tip: Warnings

Detailed warnings appear in the monitor. See pages

86–89 or more inormation.

Doublebeep

CLICK

q w

Doublebeep

CLICK

q w

Viewing Pictures



17

B a s i c P h

o t o gr a ph y an d P l a y b a c k

Viewing Pictures

Pictures can be viewed in the monitor. When taking important photographs, take a test shot and

check the results.

1 Press theH button.

The most recent picture will be displayed in

the monitor.

ISO 100ISO 100

100-0001100-0001

12/31/205012/31/2050 10:00 AM10:00 AM

NN

250250 F3.3F3.3

2 View additional pictures.

Press the selector right to viewpictures in the order recorded, let

to view pictures in reverse order.

Press the shutter button to exit to shooting

mode.

Deleting Pictures

To delete the picture currently displayedin the monitor, press the selector up (I).

The ollowing dialog will be displayed.

SET

ERASE OK?

OK CANCEL

To delete the picture, press the selector

let to highlight OK and press MENU/OK.

To exit without deleting the picture, high-

light CANCEL and press MENU/OK.

2 Tip: The Playback Menu

Pictures can also be deleted rom the playback menu(pg. 35).

Intelligent Face Detection and Red-Eye Removal



18

M

or e onP h o t o gr a ph y

g y

Intelligent Face Detection allows the camera to automatically detect human aces and set ocus and

exposure or a ace anywhere in the rame or shots that emphasize portrait subjects. Choose or group

portraits to prevent the camera rom ocusing on the background. It can be used in tall and wide ori-

entations and is available in AUTO,B,C, F, I, D, M , L, K , O, N, and B modes (pp. 28–31).

Intelligent Face Detection also oers a red-eye removal option or removing “red-eye” eects causedby the ash.

1 Turn Intelligent Face Detection on.

1.1 Press MENU/OK to display the

shooting menu.

AUTO

AUTO

OFF

N

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

1.2 Press the selector up or down

to highlight P FACE DETEC-

TION.

1.3 Press the selector right to dis-

play Intelligent Face Detection

options.


to highlight the desired option.

OptionOption DescriptionDescription

R ON

V ON

Intelligent Face Detection and red-eye

removal on. Use with the ash.

R ON

V OFF

Intelligent Face Detection on; red-eye

removal o.

OFFIntelligent Face Detection and red-eye

removal o.

1.5 Press MENU/OK to select the

highlighted option and return

to shooting mode.

A R icon appears in the moni-

tor when Intelligent Face De-

tection is on.

AUTO




19

M


2 Frame the picture.

I a ace is detected, it

will be indicated by a

green border. I there ismore than one ace in

the rame, the camera will

select the ace closest to

the center; other aces are indicated by white

borders.

3 Focus.

Press the shutter button halway

to set ocus and exposure or the

subject in the green border.3 Cautions

• I no ace is detected when the shutter button is

pressed halway (pg. 82), the camera will ocus

on the subject at the center o the monitor and

red-eye will not be removed.

• In K and B modes, exposure will be opti-

mized or the entire scene rather than the se-lected portrait subject.

AUTO

Green border

AUTO

Green border




20

4 Shoot.

Press the shutter button all the

way down to shoot.

3 CautionI the subject moves as the shutter button is

pressed, their ace may not be in the area indicat-

ed by the green border when the picture is taken.

I R ON / VON is se-

lected, the picture will

be processed to reducered-eye beore it is re-

corded (the U RED-EYE

REMOVAL option in the playback menu can

also be used to reduce red-eye; pg. 63).

Intelligent Face Detection

Intelligent Face Detection is

recommended when using the

sel-timer or group- or sel-por-

traits (pp. 26–27).

7

During slide shows, the camera can zoom in on pic-

tures taken with Intelligent Face Detection (pg. 64).

REMOVINGREMOVING

Focus Lock



21

M


To compose photographs with o-center subjects:

1 Position the subject in the ocus rame.

AUTO

2 Focus.

Press the shutter button halway to set o-

cus and exposure. Focus and exposure will

remain locked while the shutter button is

pressed halway (AF/AE lock).

250250 F3.3F3.3Press

halway

Repeat steps 1 and 2 as desired to reocus

beore taking the picture.

3 Recompose the picture.

Keeping the shutter button pressed halway,

recompose the picture.

250250 F3.3F3.3

4Shoot.

Press the shutter-release button the rest o

the way down to take the picture.

Press the rest o

the way down

Focus Lock



22

Autoocus

Although the camera boasts a high-precision autoocus system, it may be unable to ocus on the subjects listed

below. I the camera is unable to ocus using autoocus, use ocus lock (pg. 21) to ocus on another subject at

the same distance and then recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other reective object.

• Dark subjects and subjects that absorb rather than reect light, such as hair or ur.

• Insubstantial subjects, such as smoke or ame.

• Subjects that show little contrast with the background (or example, subjects in clothing that is the same color

as the background).

• Subjects positioned in ront o or behind a high-contrast object that is also in the ocus rame (or example, a

subject photographed against a backdrop o highly contrasting elements).

G Close-ups (Macro Mode)



23

M


Macro mode can be used or close-ups in AUTO,B,C, D, N, P, Q , and B modes (pp. 28–31).

Macro mode is automatically selected in P and Q modes; to select macro mode in AUTO,B,C,

D, N, and B modes, press the selector let (G).

AUTO G icon appears in monitor whencamera is in macro mode

When macro mode is in eect, the camera ocuses on subjects near the center o the monitor. Use the

zoom buttons to rame pictures.

To exit macro mode, press the selector let (G). Macro mode can also be cancelled by turning the

camera o or selecting another shooting mode.

1Note

Use o a tripod is recommended to prevent blur caused by camera shake.

TUsing the Flash



24

Use the ash when lighting is poor, or example when shooting at night or indoors under low light.

To choose a ash mode, press the selector right (T). The ash mode

changes each time the selector is pressed; in modes other than AUTO,

the current mode is indicated by an icon in the monitor. Choose rom theollowing options (some options are not available in all shooting modes;

see pg. 91):

ModeMode DescriptionDescription

AUTO (no icon) The ash fres when required. Recommended in most situations.

T (fll ash) The ash fres whenever a picture is taken. Use or backlit subjects or or natural coloration

when shooting in bright light.

X (ash o) The ash does not fre even when the subject is poorly lit.gwill appear in the monitor at slowshutter speeds to warn that pictures may be blurred. Use o a tripod is recommended.

U (slow sync)

Capture both the main subject and the background when shooting at night (note that brightly

lit scenes may be overexposed). I I is selected orA SHOOTING MODE, shutter speed may

be as slow as 4 s. Use a tripod.

I the ash will fre,c will be displayed in the monitor when the shutter button is pressed halway.

3 Caution The ash may fre several times with each shot. Do not move the camera until shooting is complete.

Using the FlashTUsing the Flash



25

M


Red-Eye Removal

When R ON / VON is selected or Intelligent Face Detection (pg. 18), red-eye removal (V) is avail-

able in AUTO (q), fll ash (r), and slow sync (W) modes. Red-eye removal minimizes “red-eye”

caused when light rom the ash is reected rom the subject’s retinas as shown in the illustration

at right.

FUsing the Sel-Timer



26

The camera oers a ten-second timer that allows photographers to appear in their own photographs,

and a two-second timer that can be used to avoid blur caused by the camera moving when the shutter

button is pressed. The sel-timer is available in all shooting modes.

1Set the timer.

The current sel-timer mode is displayed in the monitor. To choose a dierent setting, press the

selector down (F). The selection changes each time the selector is pressed.

AUTO Choose romZ (sel-timer of),

S (10 s delay), or R (2 s delay)

2 Focus.

Press the shutter button halway to ocus.

3 Caution

Stand behind the camera when using the shutter button. Standing in ront

o the lens can interere with ocus and exposure.

3 Start the timer.Press the shutter button the rest o the way down to start the timer.

The display in the monitor shows the number o seconds remaining

until the shutter is released. To stop the timer beore the picture is

taken, press DISP/BACK.

9

FUsing the Sel-Timer



27

M or e onP h o t o gr a ph y

The sel-timer lamp on the ront o the camera will

blink immediately beore the picture is taken. I the

two-second timer is selected, the sel-timer lamp

will blink as the timer counts down.

Intelligent Face Detection

Because it ensures that the aces o portrait subjects will be in ocus, Intelligent Face Detection (pg. 18) is recom-

mended when using the sel-timer or group portraits or sel-portraits. To use the sel-timer with Intelligent Face

Detection, set the timer as described in Step 1 and then press the shutter button all the way down to start the

timer. The camera will detect aces while the timer is counting down and adjust ocus and exposure immedi-

ately beore the shutter is released. Be careul not to move until the picture has been recorded.

1Note

The sel-timer turns o automatically when the picture is taken, a dierent shooting mode is selected, playback

mode is selected, or the camera is turned o.

Shooting Mode



28

Choose a shooting mode according to the scene or type o subject.

Selecting a Shooting Mode Selecting a Shooting Mode

1 Press MENU/OK to display the shoot-

ing menu.

AUTO

AUTO

OFF

N

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

2 Press the selector up or down tohighlightA SHOOTING MODE.

3 Press the selector right to display

shooting mode options.

MOVIE

BABY MODE

AUTO

Automatic modesetting according toshooting conditions.

MANUAL

CANCELSET

4 Press the selector up or down tohighlight the desired mode.

5 Press MENU/OK to select the high-

lighted option.

Shooting Mode



29


AAAUTOAUTO

Choose or crisp, clear snapshots (pg. 13). This

mode is recommended in most situations.

BB BABY MODEBABY MODE

Choose or natural skin tones when taking por-

traits o inants. The ash turns o automatically.

CCANTI-BLUR (Picture Stabilization)ANTI-BLUR (Picture Stabilization)

Choose this mode or ast shutter speeds that

reduce blur caused by camera shake or subjectmovement.

1Note

In modes other than B (pg. 31), B ISO is fxed at

AUTO (pg. 56). See page 91 or restrictions on ash

mode settings.

FF PORTRAITPORTRAIT

Choose this mode or sot-

toned portraits with naturalskin tones.

GG LANDSCAPELANDSCAPE

Choose this mode or crisp,

clear daylight shots o build-

ings and landscapes. The ashturns o automatically.

HH SPORTSPORT

Choose this mode when pho-

tographing moving subjects.

Priority is given to aster shut-

ter speeds.

Shooting Modes Shooting Modes

Shooting Mode



30

II NIGHTNIGHT

Shutter speeds as slow as 4 s

are used to record night and

twilight scenes. Use o a tripod

is recommended to prevent

camera shake.

DD NATURAL LIGHTNATURAL LIGHT

Capture natural light indoors,

under low light, or where the

ash can not be used. The

ash turns o and sensitivity israised to reduce blur.

MM BEACHBEACH

Choose or crisp, clear shots

that capture the brightness o

sunlit beaches.

LL SNOWSNOW

Choose or crisp, clear shots

that capture the brightness o

scenes dominated by shining

white snow.

JJ FIREWORKSFIREWORKS

Slow shutter speeds are used to

capture the expanding burst o

light rom a frework. Press the

selector let or right to choose

rom shutter speeds between

8 s and ½ s. Use o a tripod is recommended to

prevent blur. The ash turns o automatically.

KK SUNSETSUNSET

Choose this mode to record

the vivid colors in sunrises and

sunsets.

Shooting Mode



31


PP FLOWERFLOWER

Choose or vivid close-ups o

owers. The camera ocuses in

the macro range and the ash

turns o automatically.

OO PARTYPARTY

Capture indoor background

lighting under low-light condi-

tions.

NN MUSEUMMUSEUM

Choose where ash photogra-

phy is prohibited or the sound

o the shutter may be unwel-

come. The ash, speaker, and

sel-timer lamp turn o auto-

matically.

1Note

Photography may be prohibited altogether in some

settings. Obtain permission beore shooting.

QQ TEXTTEXT

Take clear pictures o text or

drawings in print. The camera

ocuses in the macro range.

BB MANUALMANUAL

Choose this mode or complete control o shoot-

ing settings, including sensitivity (pg. 56), expo-

sure compensation (pg. 58), quality (pg. 57), and

white balance (pg. 69).

Playback Options

T i th t t i t i th it



32

M or e onP l a y b a

c k

To view the most recent picture in the monitor,

press theH button.

ISO 100ISO 100

100-0001100-0001

12/31/205012/31/2050 10:00 AM10:00 AM

NN

250250 F3.3F3.3

Press the selector right to view pictures

in the order recorded, let to view pic-

tures in reverse order. Keep the selector

pressed to scroll rapidly to the desiredrame.

Choosing a Display Format

Press the DISP/BACK button to cycle through playback

display ormats as shown below.

ISO 100ISO 100

100-0001100-0001

12/31 /205012/31/2050 10:00 AM10:00 AM

NN

250250 F3.3F3.3

2050 12/31

8/14

12/30

12/29

Indicators displayed Indicators hidden

Sort by date Multi-rame playback

1Note

Pictures taken using other cameras are indicated by ah (“git image”) icon during playback.

Playback Options



33


c k

Playback ZoomPlayback Zoom

Press T to zoom in on the picture currently dis-

played ull rame in the monitor; press W to zoom

out. When the picture is zoomed in, the selectorcan be used to view areas o the image not cur-

rently visible in the display.

Navigation

window shows

portion o image

currently displayed in monitor

Zoom indicator

Press DISP/BACK to exit zoom.

1Note

The maximum zoom ratio varies with image size. Play-

back zoom is not available with pictures taken at an

image size o l.

Multi-Frame Playback Multi-Frame Playback

To view pictures nine at a time, press the DISP/BACK

button until nine pictures are displayed in the

monitor.

Press the selector up or down to view more pic-

tures. Use the selector to highlight images and

press MENU/OK to view the highlighted image ull

rame.

Playback Options



34

Sort by Date Sort by Date

Choose sort-by-date mode to view pictures taken on a selected date.

1Press DISP/BACK until the sort-by-date

screen is displayed.

2050 12/31

1/14

12/30

12/29

2 Use the selector to highlight the ar-

row (s) at the top let corner o the

display.

3 Press the selector let to highlight

the date.

2050 12/31

14

12/30

12/29

4Press the selector up or down to se-

lect a date.

5 Press the selector right to return to

the sort-by-date display.

6 Use the selector to highlight images

and press MENU/OK to view the high-lighted image ull rame.

IDeleting Pictures

The ERASE option in the playback menu can be used to delete still pictures and movies increasing



35


c k

The ERASE option in the playback menu can be used to delete still pictures and movies, increasing

the amount o space available on the memory card or in internal memory (or inormation on deleting

pictures in single-rame playback, see page 17). Note that deleted pictures can not be recovered. Copy

important pictures to a computer or other storage device beore proceeding.

1 Press MENU/OK to display the play-

back menu.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

2 Press the selector up or down to

highlight ERASE.

3 Press the selector right to display de-

lete options.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

FRAME

BACK

ALL FRAMES


highlight FRAME or ALL FRAMES.

5 Press MENU/OK to display options or

the selected item (see pg. 36).

2 Tips: Deleting Pictures

• When a memory card is inserted, pictures will be de-

leted rom the memory card; otherwise, pictures will

be deleted rom internal memory.

• Protected pictures can not be deleted. Remove pro-

tection rom any pictures you wish to delete (pg. 65).

• I a message appears stating that the selected images

are part o a DPOF print order, press MENU/OK to delete

the pictures.

Deleting PicturesIDeleting Pictures



36

■■ FRAMEFRAME: Deleting Selected Images: Deleting Selected Images

Selecting FRAME displays the

dialog shown at right.

YES CANCEL

ERASE OK?

Press the selector let or right to scroll

through pictures and press MENU/OK to

delete the current picture (the picture

is deleted immediately; be careul not

delete the wrong picture).

Press DISP/BACK to exit when all the desired pic-

tures have been deleted.

■■ ALL FRAMESALL FRAMES: Deleting All Images: Deleting All Images

Selecting ALL FRAMES dis-

plays the confrmation shown

at right.

ERASE ALL OK?

IT MAY TAKE A WHILE

YES CANCEL

Press MENU/OK to delete all un-

protected pictures.

The dialog shown at right is

displayed during deletion.

Press DISP/BACK to cancel be-

ore all pictures have been

deleted (any pictures deleted

beore the button was pressed

can not be recovered).

CANCEL

A Recording Movies

Shoot short movies at 30 rames per second. Sound is recorded via the built-in microphone; do not



37

M ovi e s

Shoot short movies at 30 rames per second. Sound is recorded via the built in microphone; do not

cover the microphone during recording.

1 Press MENU/OK to display the shooting menu

and selectA SHOOTING MODE > A MOVIE

(pg. 28).

STANDBYSTANDBY12 s12s Time available

is displayed in

monitor

Choosing the Frame Size

To choose the rame size,

press MENU/OK and select

C QUALITY. Choose m

(640 × 480 pixels) or better

quality, n (320 × 240 pix-

els) or longer movies. Press MENU/OK to return to

movie recording mode.

SHOOTING MENU

SHOOTING MODE

QUALITY

SET-UP

9s

4s

2 Frame the scene using the zoom

buttons.

12 s12s

STANDBYSTANDBY

Zoom indicator

Zoom can not be adjusted once recording be-

gins.

Recording Movies

3 P th h tt b tt ll th 4 P th h tt b tt h l t

A Recording Movies



38

3 Press the shutter button all the way

down to start recording.

REC 12 s12s YREC and timeremaining are

displayed in monitor

1Note

Focus is set when recording begins; exposure and

white balance are adjusted automatically throughoutrecording. The color and brightness o the image may

vary rom that displayed beore recording begins.

4 Press the shutter button halway to

end recording. Recording ends au-

tomatically when the movie reaches

maximum length or memory is ull.

2 Tip

There is no need to keep the shutter button pressed

during recording.

1Note

Movies are recorded as monaural motion JPEG fles

with a maximum fle size o 2 GB and a minimum

length o 1 s. See page 92 or more inormation on re-cording times.

H Viewing Movies

During playback (pg. 32),100 006

Progress is shown in the monitor during play-



39

M ovi e s

g p y (pg ),

movies are displayed in the

monitor as shown at right.

The ollowing operations can

be perormed while a movieis displayed:

100-006100-006

12/31/205012/31/2050 10:00 AM10:00 AM

PLAY

OperationOperation DescriptionDescription

Start/pause

playback

Press the selector down to start playback.

Press again to pause.

End

playback/

delete

Press the selector up to end playback. I

playback is paused, pressing the selector

up will delete the current movie.

Advance/

rewind

Press the selector right to advance, let to

rewind. I playback is paused, the movie

will advance or rewind one rame each

time the selector is pressed.

Adjust

volume

Press MENU/OK to pause playback and dis-

play volume controls. Press the selector

up or down to adjust the volume; pressMENU/OK again to resume playback.

g g p y

back.

15s15s

STOP PAUSE

Progress bar

2 Tip: Viewing Movies on a Computer

Copy movies to the computer beore viewing.

3 Cautions

• Do not cover the speaker during playback.• White vertical or dark horizontal streaks may appear

in movies containing very bright subjects. This is nor-

mal and does not indicate a malunction.

Viewing Pictures on TV

Connect the camera to a TV and tune the television to the video channel to show pictures to a group.



40

C o

nn e c t i on s

The supplied A/V cable connects as shown below.

Connect yellow plug

to video-in jack

Connect white plug

to audio-in jack

Insert into A/V cable

connector

PressH or about a second to turn the camera on. The camera monitor turns o and pictures and

movies are played back on the TV. Note that the camera volume controls have no eect on soundsplayed on the TV; use the television volume controls to adjust the volume.

1Notes

• Fully charge the battery beore connecting the camera.

• Image quality drops during movie playback.

3 Caution

When connecting the A/V cable, be sure the connectors are ully inserted.

Printing Pictures via USB

I the printer supports PictBridge, the camera can be connected directly to the printer and



41

C o

nn e c t i on s

pictures can be printed without frst being copied to a computer. Note that depending on

the printer, not all the unctions described below may be supported.

Connecting the CameraConnecting the Camera

1 Connect the supplied USB cable as shown and

turn the printer on.

2 Press theH button or about a second to turn

the camera on. a USB will be displayed in

the monitor, ollowed by the PictBridge display

shown below at right.

USB

00

OK SET

FRAME

PICTBRIDGE

TOTAL: 00000

SHEETS

Printing Selected PicturesPrinting Selected Pictures

1 Press the selector let or right to dis-

play a picture you wish to print.


choose the number o copies (up to

99).

3 Repeat steps 1–2 to select additionalpictures. Press MENU/OK to display a

confrmation dialog when settings

are complete.

PRINT THESE FRAMES

TOTAL: 9 SHEETS

YES CANCEL

4 Press MENU/OK to start printing.


2 Tip: Printing the Date o Recording Printing the DPOF Print Order



42

2 Tip: Printing the Date o Recording

To print the date o recording on pictures, press DISP/

BACK in steps 1–2 to display the PictBridge menu (see

“Printing the DPOF Print Order,” below). Press the se-

lector up or down to highlight PRINT WITH DATE r and press MENU/OK to return to the PictBridge display

(to print pictures without the date o recording, select

PRINT WITHOUT DATE).

1Note

I no pictures are selected when the MENU/OK button is

pressed, the camera will print one copy o the current

picture.

Printing the DPOF Print OrderPrinting the DPOF Print Order

To print the print order created with K PRINT

ORDER (DPOF) in the playback menu (pg. 44):

1 In the PictBridge display, press DISP/ BACK to open the PictBridge menu.

PRINT DPOF

PRINT WITH DATE

PRINT WITHOUT DATE

PICTBRIDGE


highlightb PRINT DPOF.

3 Press MENU/OK to display a confrma-

tion dialog.

YES CANCEL

PRINT DPOF OK?

TOTAL: 9 SHEETS


4 Press MENU/OK to start printing 1Notes



43

C o

nn e c t i on s

4 Press MENU/OK to start printing.

During Printing

The message shown at right isdisplayed during printing. Press

DISP/BACK to cancel beore all

pictures are printed (depending

on the printer, printing may end

beore the current picture has printed).

I printing is interrupted, pressH to turn the camera

o and then on again.

PRINTING

CANCEL

Disconnecting the Camera

Confrm that “PRINTING” is not displayed in the moni-

tor and pressH to turn the camera o. Disconnect

the USB cable.

1

• Fully charge the battery beore connecting the cam-

era.

• Print pictures rom internal memory or a memory

card that has been ormatted in the camera.• I the printer does not support date printing, the

PRINT WITH DATE r option will not be available in

the PictBridge menu and the date will not be printed

on the pictures in the DPOF print order.

• Deault printer page size and print quality settings are

used when printing via direct USB connection.


Creating a DPOF Print Order



44

TheKK PRINT ORDER (DPOF) option in the play-

back menu can be used to create a digital “print

order” or PictBridge-compatible printers (pg. 42)or devices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is stan-

dard that allows pictures to be printed rom

“print orders” stored in internal memory or

on a memory card. The inormation in the order in-

cludes the pictures to be printed and the number o copies o each picture.

■■ WITH DATEWITH DATE r/ WITHOUT DATE/ WITHOUT DATE

To modiy the DPOF print order, selectKK PRINT

ORDER (DPOF) in the playback menu and pressthe selector up or down to highlight WITH

DATE r or WITHOUT DATE.

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

PLAYBACK MENU

WITHOUT DATE

RESET ALL

WITH DATE

WITH DATE r: Print date o

recording on pictures.

WITHOUT DATE: Print pictures without

date.

Press MENU/OK and ollow the steps below.


play a picture you wish to include in

or remove rom the print order.

Creating a DPOF Print OrderCreating a DPOF Print Order


2 Press the selector up or down to 4 The total number o prints is dis-



45

C o

nn e c t i on s

2 p

choose the number o copies (up to

99). To remove a picture rom the

order, press the selector down until

the number o copies is 0.

SHEETS

DPOF: 00001

01

PRINT ORDER (DPOF)

SETFRAME

Total number o prints

Number o copies

3 Repeat steps 1–2 to complete theprint order. Press MENU/OK to save

the print order when settings are

complete, or DISP/BACK to exit without chang-

ing the print order.

4 p

played in the monitor. Press MENU/

OK to exit.

The pictures in the currentprint order are indicated by a

b icon during playback.

ISO 100ISO 100

100-0001100-0001

12/31/205012/31/2050 10:00 AM10:00 AM

NN


■■ RESET ALLRESET ALL



46

To cancel the current print order, select RESET ALL in theK PRINT ORDER (DPOF)

menu. The confrmation shown at right will be displayed; press MENU/OK to remove

all pictures rom the order.

1Notes

• Remove the memory card to create or modiy a print order or the pictures in internal

memory.

• Print orders can contain a maximum o 999 pictures.

• I a memory card is inserted containing a print order created by another camera, the mes-

sage shown at right will be displayed. Pressing MENU/OK cancels the print order; a new print

order must be created as described above.

YES CANCEL

RESET DPOF OK?

YES CANCEL

RESET DPOF OK?

YES NO

RESET DPOF OK?

YES NO

RESET DPOF OK?

Viewing Pictures on a Computer

The supplied FinePixViewer sotware can be used to copy pictures to a computer, where they can be

stored viewed organized and printed Beore proceeding install FinePixViewer as described below



47

C o

nn e c t i on s

stored, viewed, organized, and printed. Beore proceeding, install FinePixViewer as described below.

Do NOT connect the camera to the computer until installation is complete .

Installing FinePixViewerInstalling FinePixViewer

FinePixViewer is available in Windows and Macintosh versions. Installation instructions or Windows

are on pages 47–49, those or the Macintosh on pages 50–51.

Installing FinePixViewer: WindowsInstalling FinePixViewer: Windows

1 Confrm that the computer meets the ollowing system requirements:

OSOSPreinstalled versions o Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Proessional

(Service Pack 2), Windows 2000 Proessional (Service Pack 4), Windows Me, or Windows 98SE

CPUCPU• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)• Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)

• Other versions o Windows: 200 MHz Pentium or better

RAMRAM

• Windows Vista: 512 MB or more (1 GB or more recommended)

• Windows XP: 512 MB or more

• Other versions o Windows: 128 MB or more

Free diskFree disk

spacespace

A minimum o 450 MB required or installation with 600 MB available when FinePixViewer is running (15 GB or

more recommended under Windows Vista, 2 GB or more recommended under Windows XP)

VideoVideo 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)

OtherOther

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or aster recommended) required to use FinePix Internet Service; Internet con-

nection and e-mail sotware required to use e-mail option

3 Caution

Other versions o Windows are not supported. Operation is not guaranteed on home-built computers or

computers that have been upgraded rom earlier versions o Windows.


2 Start the computer. I you are using Windows 2000 Proessional, Windows XP, or Windows Vista, log



48

2in to an account with administrator privileges beore proceeding.

3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.

Windows Vista

I an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;

click Allow.

The installer will start automatically; click Installing FinePixViewer and ollow the on-screen instruc-

tions to install FinePixViewer S (Windows 2000, Windows XP, or Windows Vista), or FinePixViewer (oth-

er versions o Windows). Note that the Windows CD may be required during installation.

I the Installer Does Not Start Automatically

I the installer does not start automatically, select Computer or My Computer rom the Start menu (Win-

dows Vista/XP) or double-click the My Computer icon on the desktop (other versions o Windows), then

double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.


4 I prompted to install Windows Media Player or DirectX, ollow the on-screen instructions to com-



49

C onn e c t i on s

4plete installation.

5 When prompted, click Restart to restart the computer. Remove the installer CD rom the CD-ROM

drive and store the CD in a dry location out o direct sunlight in case you need to re-install thesotware. The version number is printed at the top o the CD label or reerence when updating the

sotware or contacting customer support.

Installation is now complete. Proceed to “Connecting the Camera” on page 52.


Installing FinePixViewer: MacintoshInstalling FinePixViewer: Macintosh

1 C f h h h ll



50

1 Confrm that the computer meets the ollowing system requirements:

CPUCPU PowerPC or Intel

OSOSPreinstalled version o Mac OS X version 10.3.9–10.4.11

(as o August 1, 2008; visit http://www.ujiilm.com or more inormation)RAMRAM 256 MB or more

Free disk spaceFree disk space A minimum o 200 MB required or installation with 400 MB available when FinePixViewer is running

VideoVideo 800 × 600 pixels or more with thousands o colors or better

OtherOther

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or aster recommended) required to use FinePix Internet Service; Internet

connection and e-mail sotware required to use e-mail option

2 Ater starting the computer and quitting any applications that may be running, insert the installerCD in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click Installer

or Mac OS X.

3 An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an

administrator name and password when prompted and click OK , then ollow the on-screen instruc-

tions to install FinePixViewer. Click Exit to quit the installer when installation is complete.


4 Remove the installer CD rom the CD-ROM drive. Note that you may be unable to remove the CD

i S i i i i i S i b i h CD S h i ll CD i d



51

C onn e c t i on s

i Saari is running; i necessary, quit Saari beore removing the CD. Store the installer CD in a dry

location out o direct sunlight in case you need to re-install the sotware. The version number is

printed at the top o the CD label or reerence when updating the sotware or contacting customer

support.

5 Select Applications in the Finder Go menu to open the applications older.

Double-click the Image Capture icon and select Preerences… rom the Im-

age Capture application menu.

The Image Capture preerences dialog will be displayed. Choose Other… in

the When a camera is connected, open menu, then select FPVBridge in the

“Applications/FinePixViewer” older and click Open.

Select Quit Image Capture rom the Image Capture application menu.

Installation is now complete. Proceed to “Connecting the Camera” on page 52.


Connecting the CameraConnecting the Camera



52

1 I the pictures you wish to copy are stored on a

memory card, insert the card into the camera

(pg. 8). I no card is inserted, pictures will becopied rom internal memory.

3 Caution

Loss o power during transer could result in loss o

data or damage to internal memory or the memory

card. Fully charge the battery beore connecting

the camera.

2 Turn the camera o and connect the supplied

USB cable as shown, making sure the connec-

tors are ully inserted. Connect the camera di-

rectly to the computer; do not use a USB hub

or keyboard.

3 Press theH button or about a second to turn

the camera on. FinePixViewer will start auto-

matically and the “Save Image Wizard” will bedisplayed. Follow the on-screen instructions

to copy pictures to the computer. To exit with-

out copying pictures, click CANCEL.

3 Caution

I FinePixViewer does not start automatically, the

sotware may not be correctly installed. Discon-

nect the camera and reinstall the sotware.

For more inormation on using FinePixViewer,

select How to Use FinePixViewer in the

FinePixViewer Help menu.

1Note

The camera will not turn o automatically while connected to a computer.


3 Cautions

Use only memory cards that have been ormattedDisconnecting the Camera

A f i h h i di l i ll



53

C onn e c t i on s

• Use only memory cards that have been ormatted

in the camera and contain pictures taken with the

camera. I a memory card containing a large num-

ber o images is inserted, there may be a delay beoreFinePixViewer starts and FinePixViewer may be un-

able to import or save images. Use a memory card

reader to transer pictures.

• Make sure the indicator lamp is out beore turning the

camera o or disconnecting the USB cable. Failure to

observe this precaution could result in loss o data or

damage to internal memory or the memory card.

• Disconnect the camera beore inserting or removingmemory cards.

• In some cases, it may not be possible to access pic-

tures saved to a network server using FinePixViewer

in the same way as on a standalone computer.

• The user bears all applicable ees charged by the

phone company or Internet service provider when

using services that require an Internet connection.

Ater confrming that the indicator lamp is out, ollow

the on-screen instructions to turn the camera o and

disconnect the USB cable.

Uninstalling FinePixViewer

Only uninstall FinePixViewer beore reinstalling the

sotware or when it is no longer required. Ater quit-

ting FinePixViewer and disconnecting the camera,

drag the “FinePixViewer” older rom “Applications”

into the Trash and select Empty Trash in the Finder

menu (Macintosh), or open the control panel and use“Programs and Features” (Windows Vista) or “Add/

Remove Programs” (other versions o Windows) to

uninstall FinePixViewer and associated applications.

Under Windows, one or more confrmation dialogs

may be displayed; read the contents careully beore

clicking OK .

The Shooting Menu

The shooting menu is used to adjust settings or a wide range o shooting conditions.

Using the Shooting Menu



54

M en u s

Using the Shooting MenuUsing the Shooting Menu

1 Press MENU/OK to display the shoot-

ing menu.

AUTO

AUTO

OFF

N

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

1Note

The options displayed in the shooting menu varydepending on the shooting mode.


highlight the desired menu item.

3 Press the selector right to display op-

tions or the highlighted item.

AUTO

OFF

N

SHOOTING MODE

ISO

FACE DETECTION

QUALITY

CONTINUOUS

SHOOTING MENU

TOP 3

OFF

4Press the selector up or down to

highlight the desired option.


lighted option.

The Shooting Menu

Shooting Menu Options Shooting Menu Options



55

M en u s

Menu itemMenu item DescriptionDescription OptionsOptions DefaultDeault

A SHOOTING MODEChoose a shooting mode according to the type

o subject (pg. 28).

AUTO / B / C / F / G / H / I /

D / M / L / J / K / P / O / N /

Q / A / B

AUTO

P FACE DETECTION Turn Intelligent Face Detection and red-eye re-

moval on or o (pg. 18).

R ON V ON /

R ON V OFF / OFF

R ON

V ON

B ISOAdjust ISO sensitivity (pg. 56). Choose higher

values when the subject is poorly lit.

AUTO / 1600 / 800 / 400 / 200 /

100/ 64 AUTO

C QUALITY Choose image size and quality (pg. 57).g F / g N / h / i / k /

lgN

D EXP. COMPENSATION Adjust exposure or bright, dark, or high-contrastscenes (pg. 58).

–2 EV to +2 EV in incrementso 1 / 3 EV

±0

E WHITE BALANCE Adjust color or dierent light sources (pg. 59). AUTO / a / b / c / d / e / f AUTO

G CONTINUOUS Shoot a series o pictures (pg. 60). y / OFF OFF

H SET-UP

Perorm basic camera setup such as choosing

a language and setting the time and date (pg.

70).

Q / R / S / T —

The Shooting Menu

BB ISOISO

Control the camera’s sensitivity to light Higher values can be used to reduce blur when lighting is



56

Control the camera s sensitivity to light. Higher values can be used to reduce blur when lighting is

poor; note, however, that mottling may appear in pictures taken at high sensitivities. I AUTO is se-

lected, the camera will adjust sensitivity automatically in response to shooting conditions.

In shooting modes other than B , sensitivity is set to AUTO; other values can not

be selected. Settings other than AUTO are shown by an icon in the monitor.

1717M NNISO 100ISO 100

17171717M NNISO 100ISO 100

1717

The Shooting Menu

Choose the size and quality at which still pictures Aspect Ratio

CCQUALITYQUALITY



57

M en u s

Choose the size and quality at which still pictures

are recorded. Large pictures can be printed at

large sizes with no drop in quality; small pictures

require less memory, allowing more pictures tobe recorded.

OptionOption Prints at sizes up toPrints at sizes up to

g F 28 × 21 cm/10.8 × 8.2 in. (g) or 28 × 18 cm/

10.8 × 7.3 in. (h). Choose gF or high-

quality prints, h or an aspect ratio o 3 : 2.

g N

h

i 20 × 15 cm (7.7 × 5.8 in.)k 14 × 10 cm (5.3 × 4 in.)

l5 × 4 cm (2 × 1.5 in.). Suited to e-mail or the

web.

The number o pictures that can be taken at cur-

rent settings (pg. 92) is displayed to the right o

the image quality icon in the monitor.

Aspect Ratio

Pictures taken at an image quality setting o h

have an aspect ratio o 3 : 2, the same as a rame o

35-mm flm. Pictures taken at other settings have anaspect ratio o 4 : 3.

AUTO AUTO

4 : 3 3 : 2

1Note

Image quality is not reset when the camera is turned

o or another shooting mode is selected.

The Shooting Menu

DD EXP. COMPENSATIONEXP. COMPENSATION

Use exposure compensation when photograph- Choosing an Exposure Compensation Value



58

p p p g p

ing very bright, very dark, or high-contrast sub-

jects.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

Choosing an Exposure Compensation Value

• Backlit subjects: choose values

rom +2 / 3 EV to +12 / 3 EV (or an

explanation o the term “EV”,see the Glossary on page 90)

• Highly reective subjects or very

bright scenes (e.g., snowfelds):

+1 EV

• Scenes that are mostly sky: +1 EV • Spotlit subjects (particularly i photographed against

dark backgrounds): –2 / 3 EV

• Subjects with low reectivity (pine trees or dark-col-

ored oliage): –2 / 3 EV

1Notes

• Exposure compensation is available in B mode only.

• At settings other than ±0, ai icon is displayed in the monitor. Exposure compensation is not reset when the

camera is turned o; to restore normal exposure control, choose a value o ±0. Exposure compensation is dis-

abled i the ash fres when set to AUTO orq (auto with red-eye reduction); when the ash is set toT orr,

exposure compensation is disabled i the subject is dark.

The Shooting Menu

EEWHITE BALANCEWHITE BALANCE

For natural colors, choose a setting that matches the light source (or an explanation o “white balance,”



59

M en u s

g g p

see the Glossary on page 90).


AUTO White balance adjusted automatically.

a For subjects in direct sunlight.

b For subjects in the shade.

c Use under “daylight” uorescent lights.

d Use under “warm white” uorescent lights.

e Use under “cool white” uorescent lights.

f Use under incandescent lighting.

I AUTO does not produce the desired results (or example, when taking close-ups), choose the option

that matches the light source.

1Notes

• This option is available in B mode only.

• Auto white balance is used with the ash. Turn the ash o (pg. 24) to take pictures at other settings.

• Results vary with shooting conditions. Play pictures back ater shooting to check colors in the monitor.

The Shooting Menu

GG CONTINUOUSCONTINUOUS

Select y TOP 3 to capture motion in a series o pictures. The camera takes up to three pictures while



60

the shutter-release button is pressed.

1Notes

• The ash turns o automatically (pg. 24), and ocus and exposure are determined by the frst rame in each

series. The previously-selected ash mode is restored when OFF is selected orG CONTINUOUS.

• Frame rate varies with shutter speed.

• The number o pictures that can be recorded depends on the memory available. Addition-

al time may be required to record pictures when shooting ends. The pictures are displayed

in the monitor while recording is in progress.

STORINGSTORING

The Playback Menu

The playback menu is used to manage the pictures in internal memory or on the memory card.

Using the Playback MenuUsing the Playback Menu 4 Press the selector right to display op-



61

M en u s

g y

1 Press H to enter playback mode

(pg. 32).

2 Press MENU/OK to display the play-

back menu.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE


highlight the desired menu item.

4 g p y p


PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

FRAME

BACK

ALL FRAMES


highlight the desired option.


lighted option.

The Playback Menu

Playback Menu OptionsPlayback Menu Options

The ollowing options are available:



62

The ollowing options are available:


IERASE Delete all or selected pictures (pg. 35).

URED-EYE REMOVAL Create copies with reduced red eye (pg. 63).

JSLIDE SHOW View pictures in a slide show (pg. 64).

KPRINT ORDER (DPOF) Select pictures or printing on DPOF- and PictBridge-compatible devices (pg. 44).

LPROTECT Protect pictures rom accidental deletion (pg. 65).

MCOPY Copy pictures between internal memory and a memory card (pg. 66).

NIMAGE ROTATE Rotate pictures (pg. 68).

OTRIMMING Create cropped copies o pictures (pg. 69).

HSET-UP Perorm basic camera setup (pg. 70).

The Playback Menu

UU RED EYE REMOVALRED EYE REMOVAL

This option is used with pictures taken using Intelligent Face Detection to create copies that have been

d d



63

M en u s

1Play the picture back in the monitor (pictures

taken with Intelligent Face Detection are in-

dicated by a R icon) and selectU RED EYE

REMOVAL in the playback menu (pg. 61).

YES CANCEL

REMOVAL OK?

2Press MENU/OK. The message shown

below at let will be displayed while

the camera analyses the image; i

red-eye is detected, the message shown be-

low at right will be displayed while the camera

processes the image to create a copy with re-

duced red-eye.

DETECTING

CANCEL

REMOVING

processed to remove red eye.

1Notes

• Red eye may not be removed i the camera is unable to detect a ace or the ace is in profle. Results may dier

depending on the scene. Red eye can not be removed rom pictures that have already been processed using

red-eye removal or pictures created with other devices.

• The amount o time needed to process the image varies with the number o aces detected.

• Copies created withU RED EYE REMOVAL are indicated by ad icon during playback.

The Playback Menu

JJ SLIDE SHOWSLIDE SHOW

View pictures in an automated

lid h Ch h

PLAYBACK MENU

ERASE

NORMAL

PLAYBACK MENU

ERASE

NORMAL


P l l i h b k



64

slide show. Choose the type

o show and press MENU/OK

to start. Press DISP/BACK atany time during the show to

view on-screen help. When a movie is displayed,

movie playback will begin automatically, and the

slide show will continue when the movie ends.

The show can be ended at any time by pressing

MENU/OK.

1Note

The camera will not turn o automatically while a slide

show is in progress.

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

S

WIPE

WIPE

NORMAL

NORMAL

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

S

WIPE

WIPE

NORMAL

NORMAL

NORMAL Press selector let or right to go back or

skip ahead one rame. Select WIPE or

wipe transitions between rames.WIPE

NORMAL R As above, except that camera automati-

cally zooms in on aces selected with

Intelligent Face detection (pg. 18).WIPE R

The Playback Menu

LL PROTECTPROTECT

Protect pictures rom accidental deletion. The ol-

l i ti il bl■

■ SET ALLSET ALL

P MENU/OK t t t ll



65

M en u s

lowing options are available.

■■ FRAMEFRAME

Protect selected pictures.


play the desired picture.

YES CANCEL

PROTECT OK? UNPROTECT OK?

YES CANCEL

Picture not protected Protected picture

2 Press MENU/OK to protect the picture.

I the picture is already protected,

pressing MENU/OK will remove pro-

tection rom the image.

3 Repeat steps 1–2 to protect addi-

tional images. Press DISP/BACK to exit

when the operation is complete.

Press MENU/OK to protect all

pictures, or press DISP/BACK to

exit without changing picturestatus.

YES CANCEL

SET ALL OK?

IT MAY TAKE A WHILE

■■ RESET ALLRESET ALL

Press MENU/OK to remove pro-

tection rom all pictures, or

press DISP/BACK to exit without

changing picture status. YES CANCEL

RESET ALL OK?

IT MAY TAKE A WHILE

I the number o pictures a-

ected is very large, the dis-

play at right will appear in the

monitor while the operation is

in progress. Press DISP/BACK to

exit beore the operation is complete.

3 Caution

Protected pictures will be deleted when the memory

card or internal memory is ormatted (pg. 75).

CANCELCANCEL

The Playback Menu

M COPYCOPY

Copy pictures between internal memory and a memory card.



66


highlight q INTERNAL MEMORY

t p CARD (copy pictures rom

internal memory to the memory card) or

p CARD t q INTERNAL MEMORY (copy

pictures rom a memory card to internal mem-

ory).

2Press the selector right to display op-


NEXT CANCEL

COPY

CARD INTERNALMEMORY

CARDINTERNALMEMORY CARDFRAME

ALLFRAMES


highlight FRAME or ALL FRAMES.

4 Press MENU/OK.

2 Tip: Copying Pictures Between Memory Cards

To copy pictures between two memory cards, insert

the source card and copy the pictures to internal mem-

ory, then remove the source card, insert the destinationcard, and copy the pictures rom internal memory.

The Playback Menu

■■ FRAMEFRAME

Copy selected rames.100-0001100-0001

COPY OK?

■■ ALL FRAMESALL FRAMES

Press MENU/OK to copy all pic-

tures or press DISP/BACK to exit100-0001100-0001

IT MAY TAKE

COPY ALL OK?



67

M en u s

YES CANCEL


play the desired picture.

2 Press MENU/OK to copy the picture.

3 Repeat steps 1–2 to copy additional

images. Press DISP/BACK to exit when

the operation is complete.

tures, or press DISP/BACK to exit

without copying pictures.

YES CANCEL

IT MAY TAKE

A WHILE

3 Cautions

• Copying ends when the destination is ull.

• DPOF print inormation is not copied (pg. 44).

The Playback Menu

NN IMAGE ROTATEIMAGE ROTATE

By deault, pictures taken in

tall orientation are displayed

IMAGE ROTATE

IMAGE ROTATE 1 Press the selector down to rotate the

picture 90 ° clockwise up to rotate



68

tall orientation are displayed

in wide orientation. Use this

option to display pictures inthe correct orientation in the

monitor. It has no eect on pictures displayed on

a computer or other device.

1Notes

• Protected pictures can not be rotated. Remove pro-

tection beore rotating pictures (pg. 65).

• The camera may not be able to rotate pictures cre-

ated with other devices.

To rotate a picture, play the picture back and se-

lect N IMAGE ROTATE in the playback menu

(pg. 61).

CANCELSET CANCELSET

picture 90 clockwise, up to rotate

the picture 90 ° counterclockwise.

2 Press MENU/OK to confrm the opera-

tion (to exit without rotating the pic-

ture, press DISP/BACK).

The next time the picture is played back, it will

automatically be rotated.

The Playback Menu

O TRIMMINGTRIMMING

To create a cropped copy o a picture, play the picture back and selectO TRIMMING in the playback

menu (pg 61)



69

M en u s

menu (pg. 61).

1Press the zoom buttons to zoom in and out

and use the selector to scroll the picture un-til the desired portion is displayed (to exit to

single-rame playback without creating a

cropped copy, press DISP/BACK).

Navigation

window shows

portion o image

currently displayed

in monitor YES CANCEL

TRIMMING

Zoom indicator

I the size is l, OK is displayed in yellow.

2Press MENU/OK. A confrmation dia-

log will be displayed.

CANCELREC

REC OK?

Copy size (i, k, or l; see page 57) isshown at the top. Larger crops produce larger

copies; all copies have an aspect ratio o 4 : 3.

3 Press MENU/OK to save the cropped

copy to a separate fle.

The Setup Menu

Using the Setup MenuUsing the Setup Menu

1 Display the setup menu.

1 1 P MENU/OK t di l th3 Adjust settings.

3 1 P th l t d



70

1.1 Press MENU/OK to display the

menu or the current mode.


to highlightH SET-UP.


play the setup menu.

SET-UP

OFFON

DIGITAL ZOOM

IMAGE DISP.

CONT.

1.5

FRAME NO.

LCD POWER SAVE

2 Choose a page.

2.1 Press the selector let or right to

choose a page.

2.2 Press the selector down to en-

ter the menu.


to highlight a menu item.


play options or the highlighted

item.

/LANG2 MIN

NTSC

ENGLISH

SET-UP

AUTO POWER OFF

TIME DIFFERENCETIME DIFFERENCE

VIDEO SYSTEMVIDEO SYSTEM

FORMATFORMAT5

MIN2 MIN

OFF


to highlight an option.

3.4 Press MENU/OK to select thehighlighted option.

The Setup Menu

Setup Menu Options Setup Menu Options

Menu itemMenu item DescriptionDescription OptionsOptions DefaultDeault

Choose how long pictures are displayed ater



71

M en u s

QQ

a IMAGE DISP.Choose how long pictures are displayed ater

shooting (pg. 72).3 SEC / 1.5 SEC 1.5 SEC

b FRAME NO. Choose how fles are named (pg. 73). CONTINUOUS / RENEW CONTINUOUSd DIGITAL ZOOM Enable or disable digital zoom (pg. 74). ON / OFF OFF

e LCD POWER SAVE Enable or disable monitor power saving (pg. 74). ON / OFF ON

RR

f DATE/TIME Set the camera clock (pg. 12). — —

g BEEP VOLUME Adjust the volume o camera controls. T (high) / U (mid) /

V (low) / W OFF (mute)U

h SHUTTER VOLUME Adjust the volume o the shutter sound.

i PLAYBACK VOLUME Adjust the volume or movie playback (pg. 74). — —

j LCD BRIGHTNESS Control the brightness o the monitor (pg. 74). –5 – +5 0

SS

k FORMATFormat internal memory or memory cards (pg.

75).— —

lr Choose a language (pg. 12). See page 95 ENGLISH

m AUTO POWER OFF Choose the auto power o delay (pg. 75). 5 MIN / 2 MIN / OFF 2 MIN

n TIME DIFFERENCE Set the clock to local time (pg. 76). Y / X Y

o VIDEO SYSTEMChoose a video mode or connection to a TV

(pg. 40).NTSC / PAL —

TTp RESET

Reset all settings except DATE/TIME, TIME DIF-

FERENCE, and VIDEO SYSTEM to deault values. A

confrmation dialog will be displayed, press the

selector let or right to highlight OK and press

MENU/OK.

— —

The Setup Menu

aa IMAGE DISP.IMAGE DISP.

Choose how long pictures are displayed in the monitor ater shooting.

• 3 SEC: Pictures are displayed or about 3 s beore being recorded to the memory card.



72

p y g y

• 1.5 SEC: Pictures are displayed or about 1.5 s beore being recorded to the memory card.

1Note

The colors displayed at settings o 3 SEC and 1.5 SEC may dier rom those in the fnal picture.

The Setup Menu

bb FRAME NO.FRAME NO.

New pictures are stored in image fles named using a our-digit fle num-

ber assigned by adding one to the last fle number used. The fle num-100-0001

Frame

number

100-0001

Frame

number



73

M en u s

ber is displayed during playback as shown at right. FRAME NO. controls

whether fle numbering is reset to 0001 when a new memory card is in-serted or the current memory card or internal memory is ormatted.

• CONTINUOUS: Numbering continues rom the last fle number used or the

frst available fle number, whichever is higher. Choose this option to

reduce the number o pictures with duplicate fle names.

• RENEW: Numbering is reset to 0001 ater ormatting or when a new memory card is inserted.

1Notes

• I the rame number reaches 999-9999, the shutter release will be disabled (pg. 88).

• Selectingp RESET (pg. 71) does not reset rame numbering.

• Frame numbers or pictures taken with other cameras may dier.

100-0001100-0001

File

number

Directory

number

100-0001100-0001

File

number

Directory

number

The Setup Menu

ddDIGITAL ZOOMDIGITAL ZOOM

I ON is selected, pressing T at the maximum opti-

cal zoom position will trigger digital zoom, urther

ee LCD POWER SAVELCD POWER SAVE

I ON is selected, the monitor will dim to save

power i no operations are perormed or about



74

magniying the image. To cancel digital zoom,

zoom out to the minimum digital zoom positionand press W.

Zoom indicator,DIGITAL ZOOM on

Zoom indicator,DIGITAL ZOOM of

W W TT

Digital

zoom

Optical zoom

(up to 3 ×)

Optical zoom (up to 3 ×)

AUTO

Zoom

indicator

3 CautionDigital zoom produces lower quality images than opti-

cal zoom.

eight seconds. Full brightness can be restored by

pressing the shutter button halway. The monitordoes not dim in movie mode or during playback.

ii PLAYBACK VOLUMEPLAYBACK VOLUME

Press the selector up or down

to choose volume or movie

playback and press MENU/OK to

select.

7

SET CANCEL

VOLUME

jj LCD BRIGHTNESSLCD BRIGHTNESS

Press the selector up or down

to choose monitor brightness

and press MENU/OK to select. 0

SET CANCEL

LCD BRIGHTNESS

The Setup Menu

k FORMATFORMAT

Format internal memory or

a memory card. I a memory

mmAUTO POWER OFFAUTO POWER OFF

Choose the length o time beore the camera

turns o automatically when no operations are

FORMAT

FORMAT OK?

ERASE ALL DATA

FORMAT

FORMAT OK?

ERASE ALL DATA



75

M en u s

card is inserted in the camera,

p will be displayed in the dia-log shown at right and this op-

tion will ormat the memory card. I no memory

card is inserted, q will be displayed and this op-

tion will ormat internal memory. Press the selec-

tor let to highlight OK and press MENU/OK to be-

gin ormatting.

3 Cautions

• All data—including protected pictures—will be de-

leted. Be sure important fles have been copied to a

computer or other storage device.

• Do not open the battery cover during ormatting.

perormed. Shorter times increase battery lie; i

OFF is selected, the camera must be turned o manually. Note that regardless o the option se-

lected, the camera will not turn o automatically

when connected to a printer (pg. 41) or computer

(pg. 52) or when a slide show is in progress (pg.

64).

2 Tip: Reactivating the Camera

To reactivate the camera ater it has turned o auto-

matically, press the J button or press the H

button or about a second (pg. 11).

SET

OK CANCEL

SET

OK CANCEL

The Setup Menu

nn TIME DIFFERENCETIME DIFFERENCE

When travelling, use this option to switch the camera clock instantly rom your home time zone to the

local time at your destination.



76

1Speciy the diference between local time

and your home time zone.


to highlight X LOCAL.


play the time dierence.

12/31/2050

12/31/2050

00 : 00

10:00 AM

10:00 AM

TIME DIFFERENCE

SET CANCEL

1.3 Press the selector let or right

to highlight +, –, hours, or min-utes; press up or down to edit.

The minimum increment is 15

minutes.

1.4 Press MENU/OK when settings

are complete.

2Switch between local time and your home

time zone. To set the camera clock to local time, high-

light X LOCAL and press MENU/OK. To set

the clock to the time in your home time

zone, select Y HOME. I X LOCAL is se-

lected, X will be displayed in the monitor

or three seconds ater the camera enters

shooting mode, and the date will be dis-

played in yellow.

AUTO

12/31/205012/31/2050 10:00 AM10:00 AM

Ater changing time zones, check that the

date and time are correct.

Optional Accessories

The camera supports a wide range o accessories rom FUJIFILM and other manuacturers. The ollow-

ing accessories were available as o August 2008.

■

■ Computer RelatedComputer Related ■ Audio/Visual Audio/Visual



77

T e c h ni c al N o t e

s

C O M P A C T F L A S H

D P C - C F

T M

f o r

x D - P ic t u r e C a r d

C A R D A D A P T E R

DPC-AD PC Card Adapter

■■ PrintingPrinting

TV (available from third-

party suppliers)

PictBridge-compatible printer

(available from third-party

suppliers)

Printer (available

from third-party

suppliers)

DPC-CF CompactFlash™

Card Adapter

Computer (available from

third-party suppliers)

USB

USB

Audio/visual

output

PC card slot

CF card slot or card reader

xD-Picture Card

SD/SDHC

memory card

Optional Accessories

Accessories from FUJIFILM Accessories from FUJIFILM

As o August 2008, the ollowing optional accessories were available rom FUJIFILM. For the latest in-

ormation on the accessories available in your region, check with your local FUJIFILM representative or



78

y y

visit http://www.ujiilm.com/products/digital_cameras/index.html .

• xD-Picture Cards: Choose rom 128 MB, 512 MB, 1 GB, and 2 GB cards. Both type M and type

H xD-Picture Cards can be used; note, however, that type H cards may not be compatible

with accessories such as USB drives. The card type can be determined rom the model

number: or example, “DPC-M2GB” indicates a type M card.

• NP-45 rechargeable Li-ion battery (supplied): Additional NP-45 slimline batteries can be pur-

chased as required.

• BC-45 battery charger: Replacement battery chargers can be purchased as required. The

BC-45 charges an NP-45 battery in about 180 minutes at +23 °C (+73 °F).

• DPC-AD PC card adapter: Allows an xD-Picture Card or a 3.3 V SmartMedia card to unction as

a PC Card Standard-compliant ATA (PCMCIA 2.1) type II PC card.

• DPC-CF CompactFlash™ card adapter : Allows an xD-Picture Card to unction as a Compact-

Flash card. The DPC-AD and DPC-CF can not be used with SD memory cards.C O M P A C T F L A

S H

D P C - C F

T M

f o r

x D - P i c t u r e C a r d

C A R D A D A P T E R

Caring or the Camera To ensure continued enjoyment o the product, observe the ollowing precautions.

Storage and UseStorage and Use

I the camera will not be used or an extended pe-

i d th b tt d d D

■■ CondensationCondensation

Sudden increases in temperature, such as occur

h t i h t d b ildi ld d



79

T e c h ni c al N o t e

s

riod, remove the battery and memory card. Do

not store or use the camera in locations that are:• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very high tempera-

tures, such as in a closed vehicle on a sunny day

• extremely cold

• subject to strong vibration

• exposed to strong magnetic felds, such as neara broadcasting antenna, power line, radar emit-

ter, motor, transormer, or magnet

• in contact with volatile chemicals such as pesti-

cides

• next to rubber or vinyl products

■■ Water and SandWater and Sand Exposure to water and sand can also damage the

camera and its internal circuitry and mechanisms.

When using the camera at the beach or seaside,

avoid exposing the camera to water or sand. Do

not place the camera on a wet surace.

when entering a heated building on a cold day,

can cause condensation inside the camera. I thisoccurs, turn the camera o and wait an hour be-

ore turning it on again. I condensation orms on

the memory card, remove the card and wait or

the condensation to dissipate.

CleaningCleaning

Use a blower to remove dust rom the lens and

monitor, then gently wipe with a sot, dry cloth.

Any remaining stains can be removed by wiping

gently with a piece o FUJIFILM lens-cleaning pa-

per to which a small amount o lens-cleaning uid

has been applied. Care should be taken to avoid

scratching the lens or monitor. The camera body

can be cleaned with a sot, dry cloth. Do not usealcohol, thinner, or other volatile chemicals.

TravellingTravelling

Keep the camera in your carry-on baggage.

Checked baggage may suer violent shocks that

could damage the camera.

Troubleshooting

Power and Battery

ProblemProblem Possible causePossible cause SolutionSolution PagePage

The camera does The battery is exhausted.

Charge the battery or insert a ully-charged

spare battery.4, 6



80

T r o u b l e s h o o t i n g

Power

supply

not turn on. The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 6

The battery-chamber cover is not latched. Latch the battery-chamber cover. 7

The battery runs

down quickly.

The battery is cold.

Warm the battery by placing it in a pocket or

other warm place and re-insert it in the camera

immediately beore taking a picture.

v

There is dirt on the battery terminals. Clean the terminals with a sot, dry cloth. —

The battery has been charged many times. The battery has reached the end o its charging

lie. Purchase a new battery.—

The camera turns

o suddenly.

The battery is exhausted.Charge the battery or insert a ully-charged

spare battery.

4, 6

Battery

charger

Charging does

not start.

The battery is not correctly inserted. Re-insert the battery in the charger. 4

The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 4

Charging is slow. The temperature is low. Charge the battery at room temperature. v

The charging

lamp lights, but

the battery does

not charge.

There is dirt on the battery terminals. Clean the terminals with a sot, dry cloth. —

The battery has been charged many times.

The battery has reached the end o its charging

lie. Purchase a new battery. I the battery still

ails to charge, contact your FUJIFILM dealer.

—

Troubleshooting

Menus and Displays


Menus and displays are

not in English.

English is not selected or thel r

option in the setup menu.Select ENGLISH. 12



81


Shooting


Taking

pictures

No picture is

taken when the

shutter button is

pressed.

Memory is ull. Insert a new memory card or delete pictures. 8, 35

Memory is not ormatted.Format the memory card or internal memo-

ry.75

There is dirt on the memory card contacts. Clean the contacts with a sot, dry cloth. —

The memory card is damaged. Insert a new memory card. 8


spare battery.

4, 6

The camera has turned o automatically. Turn the camera on. 11, 75

The monitor

goes dark ater

shooting.

The ash has fred. The monitor may darken while the ash

charges. Wait or the ash to charge.24

Focus The camera does

not ocus.

The subject is close to the camera. Select macro mode.23

The subject is ar away rom the camera. Cancel macro mode.

The subject is not suited to autoocus. Use ocus lock. 21

Close-ups Macro mode isnot available.

The camera is in F, G, H , I, M , L, J,K , O, or A mode.

Choose a dierent shooting mode. 28

Troubleshooting


Face detection

not available.

The camera is in G, H , J, P, Q , or A

mode.Choose a dierent shooting mode. 28

The subject ’s ace is obscured by sunglasses,

h t l h i th bj tRemove the obstructions.



82

IntelligentFace

Detection

No ace is de-tected.

a hat, long hair, or other objects.

18 The subject’s ace occupies only a small areao the rame. Change the composition so that the subject’sace occupies a larger area o the rame.

The subject’s head is tilted or horizontal. Ask the subject to hold their head straight.

The camera is tilted. Hold the camera straight. 14

The subject’s ace is poorly lit. Shoot in bright light. —

Wrong subject

selected.

The selected subject is closer to the center o

the rame than the main subject.

Recompose the picture or turn ace detection

o and rame the picture using ocus lock.21

Flash

The ash does

not fre.

The ash is charging. Wait or the ash to charge. 16

B, G, D, J, P, N, or A mode is se-lected.



spare battery.4, 6

The camera is in continuous mode. Select OFF orG CONTINUOUS. 60

The ash is o (X). Choose a dierent ash mode. 24

Some ash

modes are not

available.

The camera is in AUTO, B,C, G, H , I,

D, M , L, J, K , P, O, N, Q , or A

mode.


The ash does

not ully light the

subject.

The subject is not in range o the ash. Position the subject in range o the ash. 94

The ash window is obstructed. Hold the camera correctly. 14

MoviesRecording ends

unexpectedly.

Files have been repeatedly recorded to and

deleted rom a type M xD-Picture Card .

Ater copying important fles to another

device, ormat the card or delete all fles.—

Troubleshooting


Problem

Pictures are

blurred.

The lens is dirty. Clean the lens. 79

The lens is blocked. Keep objects away rom the lens. 14

f is displayed during shooting. Check ocus beore shooting.15, 21,

86



83


images

p y g g g86

g is displayed during shooting. Use the ash or a tripod. 24Pictures are

mottled.

The ambient temperature is high and the

subject is poorly lit.

This is normal and does not indicate a mal-

unction. Choose a lower sensitivity.56

Playback


Pictures

Pictures are

grainy.

The pictures were taken with a dierent make

or model o camera.— —

Playback zoomunavailable.

The pictures were taken at an image size o l or with a dierent make or model o

camera.

— —

AudioNo sound in

movie playback.

Playback volume is too low. Adjust playback volume. 39, 74

The microphone was obstructed. Hold the camera correctly during recording. 37

The speaker is obstructed. Hold the camera correctly during playback. 39

DeletionSelected pictures

are not deleted.

Some o the pictures selected or deletion

are protected.

Remove protection using the device with

which it was originally applied.65

Frame no. File numberingis unexpectedly

reset.

The battery-chamber cover was openedwhile the camera was on.

Turn the camera o beore opening the bat-tery-chamber cover to replace the battery or

insert a memory card.

11, 73

Troubleshooting

Connections


The camera is not properly connected. Connect the camera correctly. 40

The supplied A/V cable was connected dur-

ing movie playback

Connect the camera once movie playback

has ended39, 40



84

TV

No picture or

sound.

ing movie playback. has ended.,

Input on the television is set to “TV”. Set input to “VIDEO”. — The camera is not set to the correct video

standard.

Match the camera o VIDEO SYSTEM set-

ting to the TV.40, 71

The volume on the television is too low. Adjust the volume. —

No color. The camera is not set to the correct video

standard.

Match the camera o VIDEO SYSTEM set-

ting to the TV.40, 71

Computer

The computer

does not recog-

nize the camera.


PictBridge

Pictures can not

be printed.


The printer is o. Turn the printer on. —

Only one copy is

printed. The printer is not PictBridge-compatible. — —

The date is not

printed.

Troubleshooting

Miscellaneous


Nothing happens when the

shutter button is pressed.

Temporary camera malunction. Remove and reinsert the battery. 6


b tt4, 6



85


p yspare battery.

,

The camera does not unc-

tion as expected. Temporary camera malunction.

Remove and reinsert the battery. I theproblem persists, contact your FUJIFILM

dealer.

6, 100

Warning Messages and Displays The ollowing warnings are displayed in the monitor:

WarningWarning DescriptionDescription SolutionSolution

O (red) Low battery. Charge the battery or insert a ully-charged spare bat-

tery.N (blinks red) Battery exhausted.

g Slow shutter speed Picture may be blurred Use the ash or mount the camera on a tripod



86

g Slow shutter speed. Picture may be blurred. Use the ash or mount the camera on a tripod.

f

(displayed in red) The camera can not ocus.

• Use ocus lock to ocus on another subject at thesame distance, then recompose the picture (pg. 21).

• I the subject is poorly lit, try ocusing at a distance o

about 2 m (6 t. 7 in.).

• Use macro mode to ocus when taking close-ups.

e

(blinks red)

The subject is too bright or too dark. The pic-

ture will be over- or under-exposed.I the subject is dark, use the ash.

FOCUS ERROR

Camera malunction.

Turn the camera o and then on again, taking care not

to touch the lens. I the message persists, contact aFUJIFILM dealer (pg. 100).ZOOM ERROR

NO CARDNo memory card inserted when COPY is se-

lected in the playback menu.Insert a memory card.

CARD NOT INITIALIZED

The memory card or internal memory is not

ormatted.Format the memory card or internal memory (pg. 75).

The memory card contacts require cleaning.

Clean the contacts with a sot, dry cloth. I the mes-

sage is repeated, ormat the memory card (pg. 75). I

the message persists, replace the memory card.Camera malunction. Contact a FUJIFILM dealer (pg. 100).

PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 8).

BUSY The memory card is incorrectly ormatted. Use the camera to ormat the memory card (pg. 75).

Warning Messages and Displays


CARD ERROR

The memory card is not ormatted or use in

the camera.Format the memory card (pg. 75).

The memory card contacts require cleaning or

h d i d d





87


the memory card is damaged.sage is repeated, ormat the memory card (pg. 75). I

the message persists, replace the memory card.

Camera malunction. Contact a FUJIFILM dealer (pg. 100).

p MEMORY FULL

The memory card or internal memory is ull;

pictures can not be recorded or copied.

Delete pictures or insert a memory card with more ree

space.

q MEMORY FULL

INTERNAL MEMORY IS FULL

INSERT A NEW CARD

WRITE ERROR

Memory card error or connection error.

Re-insert the memory card or turn the camera o

and then on again. I the message persists, contact a

FUJIFILM dealer (pg. 100).

Not enough memory remaining to record ad-

ditional pictures.

Delete pictures or insert a memory card with more ree

space.

The memory card or internal memory is not

ormatted.Format the memory card or internal memory (pg. 75).

READ ERROR

The fle is corrupt or was not created with the

camera. The fle can not be played back.

The memory card contacts require cleaning.



the message persists, replace the memory card.

Camera malunction. Contact a FUJIFILM dealer (pg. 100).



FRAME NO. FULL The camera has run out o rame numbers

(current rame number is 999-9999).

Format the memory card and select RENEW or the

b FRAME NO. option in the H SETUP menu. Take

a picture to reset rame numbering to 100-0001,

then return to the b FRAME NO. menu and select



88

CONTINUOUS.

TOO MANY FRAMESDate or which more than 4,999 pictures exist

selected in sort-by-date view.Choose a dierent date.

CANNOT DETECTRed-eye reduction can not be applied to the

selected picture or movie.—CANNOT EXECUTE

A CANNOT EXECUTE

PROTECTED FRAMEAn attempt was made to delete or rotate a

protected picture.

Remove protection beore deleting or rotating pic-

tures.

p NO IMAGE The source device selected in the playback COPY menu contains no pictures. Select a dierent source.q NO IMAGE

l CAN NOT TRIM An attempt was made to crop a l picture.

These pictures can not be cropped.CAN NOT TRIM

The picture selected or cropping is damaged

or was not created with the camera.

DPOF FILE ERROR The DPOF print order on the current memory

card contains more than 999 images.

Copy the pictures to internal memory and create a new

print order.

CAN NOT SET DPOF The picture can not be printed using DPOF. —

ACAN NOT SET DPOF Movies can not be printed using DPOF. —CAN NOT ROTATE The picture can not be rotated. —

A CAN NOT ROTATE Movies can not be rotated. —

COMMUNICATION ERROR

A connection error occurred while pictures

were being printed or copied to a computer

or other device.

Confrm that the device is turned on and that the USB

cable is connected.



PRINTER ERRORPrinter out o paper or ink, or other printer er-

ror.

Check printer (see printer manual or details). To resume

printing, turn the printer o and then turn it back on.

PRINTER ERROR

RESUME?

Check printer (see printer manual or details). I printing

does not resume automatically, press MENU/OK to resume.



89


CAN NOT BE PRINTED

An attempt was made to print a movie, a pic-

ture not created with the camera, or a picture

in a ormat not supported by the printer.

Movies and some pictures created with other devicescan not be printed. I the picture was created with the

camera, check the printer manual to confrm that the

printer supports the JFIF-JPEG or Exi-JPEG ormat. I it

does not, the pictures can not be printed.

Glossary

Digital zoom: Unlike optical zoom, digital zoom does not increase the amount o visible detail. Instead, details vis-

ible using optical zoom are simply enlarged, producing a slightly “grainy” image.

DPOF (Digital Print Order Format): A standard that allows pictures to be printed rom “print orders” stored

in internal memory or on a memory card. The inormation in the order includes the pictures to be

printed and the number o copies o each picture



90

A p p en d i x

printed and the number o copies o each picture.

EV (Exposure Value): The exposure value is determined by the sensitivity o the image sensor and the amount

o light that enters the camera while the image sensor is exposed. Each time the amount o light doubles, EV

increases by one; each time the amount o light is halved, EV decreases by one. The amount o light entering the

camera can be controlled by adjusting aperture and shutter speed.

Exi Print: A standard that allows inormation stored with pictures to be used or optimal color reproduction dur-

ing printing.

JPEG (Joint Photographic Experts Group): A compressed fle ormat or color images. The higher the compressionrate, the greater the loss o inormation and more noticeable drop in quality when the picture is displayed.

Motion JPEG: An AVI (Audio Video Interleave) ormat that stores images and sound in a single fle, with the images

recorded in JPEG ormat. Motion JPEG fles can be played in QuickTime 3.0 or later.

WAV (Waveorm Audio Format): A standard Windows audio fle ormat. WAV fles have the extension “*.WAV” and

may be compressed or uncompressed. The camera uses uncompressed WAV. WAV fles can be played using

Windows Media Player or QuickTime 3.0 or later.

White balance: The human brain automatically adapts to changes in the color o light, with the result that objects

that appear white under one light source still appear white when the color o the light source changes. Digital

cameras can mimic this adjustment by processing images according to the color o the light source. This process

is known as “white balance.”

Flash Mode and Shooting Mode

The ash modes available depend on the shooting mode (pg. 28) and the option selected orP FACE

DETECTION.

■ PFACE DETECTION: R ON V OFF or OFF

Shooting modeShooting mode



91

A p p en d i x

Flash modeFlash mode AUTO BB CC FF GG HH II DD MM LL JJ KK PP OO NN QQ BBAUTO ✔ — ✔ ✔ — ✔ — — ✔ ✔ — — — ✔ — — ✔

T ✔ — ✔ ✔ — ✔ — — ✔ ✔ — ✔ — — — ✔ ✔

X ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ — ✔ ✔ ✔

U — — — ✔ — — ✔ — — — — — — — — — ✔

■ PFACE DETECTION: R ON V ON

Shooting modeShooting mode

Flash modeFlash mode AUTO BB CC FF GG** HH** II DD MM LL JJ ** KK PP ** OO NN QQ** BB

q ✔ — ✔ ✔ — — — — ✔ ✔ — — — ✔ — — ✔

r ✔ — ✔ ✔ — — — — ✔ ✔ — ✔ — — — — ✔

X ✔ ✔ ✔ ✔ — — ✔ ✔ ✔ ✔ — ✔ — — ✔ — ✔

W — — — ✔ — — ✔ — — — — — — — — — ✔

* Red-eye removal (R ON V ON) not available.

Internal Memory/Memory Card Capacity

The ollowing table shows the recording time or number o pictures available at dierent image quali-

ties. All fgures are approximate; fle size varies with the scene recorded, producing wide variations in

the number o fles that can be stored. The number o exposures or length remaining may not diminish

at an even rate.

g F g N h i k l m n



92

gg FF gg NN hh ii kk ll mm nn

Image size (pixels)Image size (pixels) 3264 × 2448 3264 × 2176 2304 × 1728 1600 × 1200 640 × 480 640 × 480 320 × 240File sizeFile size 4.2 MB 2.3 MB 2.1 MB 1.0 MB 720 KB 215 KB — —

Internal memoryInternal memory

(approx. 8 MB)(approx. 8 MB)1 2 3 6 10 35 4 sec. 9 sec.

xD-PcureCd

x D - P i c

t u r e C a r d

16 MB16 MB 3 6 6 13 20 70 10 sec. 22 sec.32 MB32 MB 7 13 14 28 41 144 24 sec. 51 sec.64 MB64 MB 15 27 29 57 84 293 50 sec. 1.7 min.

128 MB128 MB30 54 60 115 169 591 1.7 min. 3.6 min.256 MB256 MB 61 110 121 231 339 1186 3.5 min. 7.4 min.

512 MB512 MB 124 221 242 463 680 2374 7.0 min. 14.9 min.1 GB1 GB 249 444 486 929 1363 4757 14.1 min. 30.1 min.2 GB2 GB 498 889 974 1860 2728 9519 28.3 min. 60.3 min.

SD cad

S D c a r d

512 MB512 MB 120 214 235 449 659 2299 6.8 min. 14.5 min.1 GB1 GB 241 430 471 900 1320 4607 13.7 min. 29.1 min.2 GB2 GB 483 861 943 1802 2643 9221 27.5 min. 58.4 min.SDHC

S

D H C

cad c a r d 4 GB4 GB 968 1725 1890 3609 5293 18467 55.1 min.

*

117.0 min.*

8 GB8 GB 1924 3463 3793 7242 10622 37056 110.6 min.* 234.9 min.*

* Total length o all movie fles. Individual movies can not exceed 2 GB in size.

Note: The space available or movies may drop as pictures are recorded to and deleted rom type M xD-Picture Cards. Space

can be increased by deleting all rames or ormatting the card. Copy any important fles to a computer or other device beore

proceeding.

Specications

System

Model Digital camera FinePix J15d

Efective pixels 8.15 million pixels

CCD 1 / 2.5-inch

Storage media Internal memory (approx. 8 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)/



93

A p p en d i x

SD/SDHC Memory Card (FUJIFILM recommendation (p. 8))File ormat Still image: DCF-compliant

Compressed: Exi ver.2.2 JPEG, DPOF-compatible

*Design rule or Camera File System compliant/DPOF compatible

Movie: AVI ormat, Motion JPEG

Audio: Monaural sound

Number o recorded pixels Still image:

3264 × 2448 pixels/3264 × 2176 pixels/

2304 × 1728 pixels/1600 × 1200 pixels/

640 × 480 pixels (g / h / i / k / l)

File size See the table on the p. 92

Lens 3 × optical zoom lens

F2.8 (Wide-angle) – F5.2 (Telephoto)

Focal length =6.2 mm – 18.6 mm (Equivalent to approx. 38 mm – 113 mm on a 35 mm camera)

Digital zoom Approx. 5.1 × (3 × optical zoom lens is used together: Max. zoom scale: approx. 15.3 ×)

Aperture F2.8 – F5.6 (Wide-angle)

F5.2 – F10.4 (Telephoto)

Focal range

(rom lens surace)

Normal: approx. 40 cm (1.3 t.) to infnity

Macro: wide-angle: approx. 15 cm (5.9 in.) to infnity

telephoto: approx. 40 cm (1.3 t.) to infnity

Sensitivity AUTO / Equivalent to ISO 64/100/200/400/800/1600 (Standard output sensitivity)

Photometry TTL 256-zones metering

Exposure control Program AE

Specifcations

System

Scene position B (BABY MODE) / C (ANTI-BLUR) / F (PORTRAIT) / G (LANDSCAPE) / H (SPORT) / I (NIGHT) /

D (NATURAL LIGHT) / M (BEACH) / L (SNOW) / J (FIREWORKS) / K (SUNSET) / P (FLOWER) / O (PARTY) / N (MUSEUM) / Q (TEXT)

Exposure compensation –2 EV to +2 EV in 1 / 3 EV-step increments (B)

Intelligent Face Detection Available



94

Intelligent Face Detection Available

Shutter speed 1 / 4 sec. to 1 / 2000 sec.* (AUTO)

8 sec. to 1 / 2000 sec.* (throughout all shooting mode)

*depend on Exposure mode

Continuous shooting Number o recorded rames: up to 3 rames (approx. 1 rame/sec.)

Focus Mode: Single-AF

AF system: TTL contrast-type

AF rame selection: CENTER

White balance Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),

Fluorescent (Cool White), Incandescent light)

Sel-timer Approx. 2 sec./10 sec.

Flash type Auto ash

Eective range: (B: AUTO)

Wide-angle: approx. 50 cm – 4.0 m (1.6 t. – 13.1 t.)

Telephoto: approx. 50 cm – 2.2 m (1.6 t. – 7.2 t.)

Macro: approx. 30 cm – 80 cm (11.8 in. – 2.6 t.)

Flash mode Auto, fll ash, o, slow sync (red-eye removal o); auto with red-eye reduction, fll ash with red-eye

reduction, o, slow sync with red-eye reduction (red-eye removal on)LCD monitor 2.5 inches, Aspect ratio: 4:3; approx. 153,000 dots Amorphous silicon TFT color LCD monitor, Approx.

96% coverage

Specifcations

System

Movie 640 × 480 pixels (m) / 320 × 240 pixels (n)

(30 rames per second with monaural sound)

A movie recording will stop automatically when a movie fle becomes approx. 2GB. I you want to

continue recording, press the shutter button again. The available recording time is displayed based

on approx 2GB Zoom cannot be used during movie recording



95

A p p en d i x

on approx. 2GB. Zoom cannot be used during movie recording.

Photography unctions Intelligent Face Detection with red-eye removal, best raming, and rame number memory

Playback unctions Intelligent Face Detection with red-eye removal, multi-rame playback, sort-by-date, cropping (still

pictures only), slide show, and image rotation

Other unctions PictBridge, Exi Print, language selection (Simplifed Chinese, Traditional Chinese, Czech, Dutch,

English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish,

Swedish, Thai, and Turkish), time dierence

Input/output terminals

A/V OUT (Audio/video output) NTSC/PAL-type (with monaural sound)Digital input/output USB, PTP (Picture Transer Protocol)/MTP (Media Transer Protocol)

Specifcations

Power supply/other

Power supply Rechargeable Battery NP-45

Guide to the number o

available rames or battery

operation

Battery TypeBattery Type Number of framesNumber o rames

NP-45 Approx. 150 rames

According to the CIPA (Camera & Imaging Products Association) standard procedure or measuring



96

g g g p g

digital still camera battery consumption (extract):When using a battery, use the battery supplied with the camera. The storage media should be xD-

Picture Card .

Pictures should be taken at a temperature o +23 °C (+73 °F), with the LCD monitor turned on, the op-

tical zoom moved rom ull wide-angle to ull telephoto (or vice-versa) and back again to its original

position every 30 seconds, the ash used at ull power every second shot and the camera turned o

and then on again once every 10 shots.

• Note: Because the number o available shots varies depending on the level o charge in the battery,

the fgures shown here or the number o available shots using the battery is not guaranteed. The number o available shots will also decline at low temperatures.

Camera dimensions

(W × H × D)

91.0 mm × 55.0 mm × 22.0 mm/3.6 in. × 2.2 in. × 0.9 in. (not including accessories and attachments)

Camera mass (weight) Approx. 110 g/3.9 oz. (not including accessories, battery and Memory Card)

Weight or photography Approx. 126.5 g/4.5 oz. (including battery and Memory Card)

Operating conditions Temperature: 0 °C to +40 °C (+32 °F to +104 °F)

80% humidity or less (no condensation)

NP-45 rechargeable battery

Nominal voltage DC 3.7 V

Nominal capacity 740 mAh

Operating temperature 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 31 mm × 39.4 mm × 5.7 mm/1.2 in. × 1.6 in. × 0.2 in.

Weight Approx. 15 g/0.5 oz.

Specifcations


Rated input 100–240 V AC, 50/60 Hz

Input capacity 7.0 VA (100 V)/10.8 VA (240 V)

Rated output 4.2 V DC, 550 mA

Supported batteries NP-45 rechargeable batteries

Charging time Approx 100 minutes



97

A p p en d i x

Charging time Approx. 100 minutes

Dimensions (W × H × D)

(built-in plug model)

101.7 mm × 56 mm × 20 mm/4.0 in. × 2.2 in. × 0.8 in.

Dimensions (W × H × D)

(power cable model)

85 mm × 54 mm × 20 mm/3.3 in. × 2.1 in. × 0.8 in.

Weight (built-in plug model) Approx. 66 g/2.3 oz., excluding battery

Weight (power cable model) Approx. 56 g/2.0 oz., excluding battery

Operating temperature 0 °C – +40 °C/+32 °F – +104 °F

Specifcations

Notes on the Battery and Battery Charger

• The battery and charger may become warm to the touch during charging. This is normal and does not indicate

a malunction. I possible, charge the battery in a well-ventilated location.

• The battery charger may vibrate when in use. This is normal and does not indicate a malunction.

• The charger is or use with NP-45 batteries only.



98

• I the charger causes radio intererence, increase the distance between the charger and the radio receiver.• Do not leave the charger in locations that are very dusty or exposed to strong vibration, extreme humidity, or

high temperatures (or example, in direct sunlight or next to a heater).

• The battery charger can be used with input voltages o 100–240 V AC and 50 or 60 Hz. The shape o the plug var-

ies with the country o sale; consult your travel agent to determine whether the charger can be used abroad.

Color Television Systems

NTSC (National Television System Committee) is a color television telecasting specifcation adopted mainly in

the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly inEuropean countries and China.

Specifcations

Notices

• Specifcations subject to change without notice. FUJIFILM shall not be held liable or damages resulting rom

errors in this manual.

• Although the monitor is manuactured using advanced high-precision technology, small bright points and

anomalous colors (particularly in the vicinity o text) may appear. This is normal or this type o monitor and



99

A p p en d i x

does not indicate a malunction; images recorded with the camera are unaected.• Digital cameras may malunction when exposed to strong radio intererence (e.g., electric felds, static electric-

ity, or line noise).

• Due to the type o lens used, some distortion may occur at the periphery o images. This is normal.

FUJIFILM Digital Camera Worldwide Network Contact your local distributor (see list below) or repairs and technical support. Please present the war-

ranty and purchase receipt when requesting repairs; reer to the warranty card or the conditions o the

warranty. Technical support may not be available or models not handled by the local distributor. The

ollowing inormation is subject to change without notice.

NORTH AMERICA



100

Canada FUJIFILM Canada Inc. Technical suppor t TEL 1-866-818-FUJI (3854) http://www.ujihelp.caRepair service TEL 1-800-263-5018 http://www.ujihelp.ca

U.S.A. FUJIFILM U.S.A., Inc. Technical suppor t TEL 800-800-3854 [email protected]

Repair service TEL 800-659-3854

CENTRAL AND SOUTH AMERICA

Argentina Imagen e inormacion S.A. Technical suppor t & repairs TEL +54-11-4836-1000 [email protected]

Bolivia Reischneider Bolivia Ltda. Technical suppor t & repairs TEL +591 33 44 1129 [email protected]

Brazil FUJIFILM do Brasil Ltda. Technical suppor t & repairs TEL 0800 -12-8600 [email protected]

Chile Reischneider SA Technical suppor t & repairs TEL 56-2-6781200 [email protected]

Colombia Animex de Colombia Ltda. Technical suppor t & repairs TEL +57 1 338-0299 [email protected]

Ecuador Espacri Cia Ltda Technical suppor t & repairs TEL 593-72-835526

Importaciones Espacri Cia. Ltda. Technical suppor t & repairs TEL +593 783 5526 portiz@ ujiilm.com.ec

Mexico Fujilm de Mexico, S. A. de C.V. Technical suppor t TEL (52-55) 5263-55000 [email protected]

Repair service TEL (52-55) 5366-5150/56/57 [email protected]

Paraguay Errece S.R.L. Technical suppor t & repairs TEL +595 21 444256 jmarbulo@uji ilm.com.py

Peru Procesos de Color S.A. Technical suppor t & repairs TEL +51 14 33 5563 [email protected]

Uruguay Fotocamara S.R.L. Technical suppor t & repairs TEL +598-2-9002004 [email protected]

Uruguay Kiel S.A. Technical suppor t & repairs TEL (05982) 419 4542 [email protected]

Venezuela C. Hellmund & Cia Sa Technical suppor t & repairs TEL 0212-2022300 [email protected]

EUROPE

Austria Fuji Film Oesterreich Technical suppor t & repairs TEL 0043 1 6162606/51 or 52 [email protected]

Belgium Belgian Fuji Agency Technical suppor t & repairs TEL 3210242090 [email protected]

Croatia I&I d.o.o. Technical suppor t TEL 38512319060 [email protected]

Repair service TEL 38512316228 [email protected]

EUROPECyprus PMS IMAGING LTD Technical suppor t & repairs TEL 35722746746 [email protected]

Doros Neophytou

CAMERA REPAIRS

Technical suppor t & repairs TEL 35722314719 [email protected]

Czech Republic Fujilm Cz., s.r.o. Technical suppor t TEL 00420 234 703 411 [email protected]

AWH servis Repair service TEL 00420 222 721 525 [email protected]

Denmark Fujilm Danmark A/S Technical suppor t & repairs TEL 0045 45662244 [email protected]

Finland Fuji Finland Oy Technical suppor t & repairs TEL +358 9 825951 www.uji.i [email protected]

France FUJIFILM France Technical suppor t & repairs [email protected]

Germany FUJIFILM Electronic Imaging Europe Technical suppor t & repairs Tel 0180 / 589 89 80* [email protected]



101

A p p en d i x

y g g p

GmbH

pp p @ j g* 0,14 EUR pro Minute aus dem deutschen Festnetz, abweichende

Preise aus Mobilunknetzen möglich,Stand bei Drucklegung.

Greece FUJIFILM HELLAS S.A. Technical suppor t & repairs TEL 0030 210 9404100 [email protected]

Hungary Fujilm Hungary Ltd. Technical suppor t TEL 3612389410 [email protected]

Repair service TEL 3613633777

Iceland Icephoto (Ljosmyndavorur) Technical suppor t & repairs TEL 354 568 0450 [email protected]

Italy FujiFilm Italia S.r.l. Call center TEL 039-0267978181 [email protected]

Repair service TEL 039-6058294 FAX 039-6058295

Lithuania Fujilm Lithuania Technical suppor t & repairs TEL 370-5-2130121 [email protected]

Malta Ciancio (1913) Co.Ltd. Technical suppor t & repairs TEL 0356-21-480500 [email protected]

Norway Fujilm Norge AS Technical suppor t TEL 0047-02273

http://www.ujiilm.no/ mailto:[email protected]

Repair service TEL 0047-55393880

http://www.camera.no/mailto:[email protected]

Poland Fujilm Polska Distribution Sp.

z o.o.

Technical support TEL +48-22-517-66-00 [email protected]

Repair service TEL +48-22-886-94-40 [email protected]

Portugal Fujilm Portugal, Lda Technical suppor t TEL (351) 226 194 237 [email protected]

Repair service TEL (351) 226 194 200 [email protected]

Romania CTS-Cardinal Top Systems Ltd Technical suppor t & repairs TEL 4021-230-09-82 [email protected] ZAO “Fujilm RU” Technical suppor t TEL +7-495-956-98-58 [email protected]

Repair service TEL +7-495-956-98-58 www.ujiilm.ru

Slovakia Fujilm Slovakia s.r.o. Technical support TEL 00421 2 33 595 107 [email protected]

Repair service TEL 00421 2 33 595 119 [email protected]

Spain Fujilm Espana S.A. Technical support & repairs TEL 902012535

http://www.ujiilm.es/soporte/ [email protected]

EUROPE

Sweden Fujilm Sverige AB Technical suppor t TEL 46 8 506 141 70 [email protected]

Repair service TEL 46 8 506 513 54 [email protected]

Switzerland /

Lichtenstein

Fujilm (Switzerland) AG Technical suppor t & repairs TEL +41 44 855 5154 [email protected]

The Netherlands FUJIFILM Electronic Imaging

Nederland

Technical suppor t TEL +31(0)102812500 [email protected]

Repair service TEL +31(0)102812520 [email protected]

Turkey Fujilm Turkiye Sino A.S. Technical suppor t TEL +90 212 696 5090 [email protected]

Repair service TEL +90 212 696 5090 [email protected]

U.K. FUJIFILM UK Ltd. Technical suppor t TEL +44 (0)8700 841310 [email protected]



102

Repair service TEL +44 (0)8700 841314 [email protected]

Ukraine Image Ukraine CJSC Technical suppor t & repairs TEL +380-44-4909075 [email protected]

MIDDLE EAST

Iran Tehran Fuka Co. Technical suppor t & repairs TEL (+98-21)2254810-19 [email protected]

Israel Shimone Group Ltd. Technical suppor t TEL (+ ) 972 3 9250666 [email protected]

Repair service TEL (+ ) 972 3 9250666 [email protected]

Jordan Grand Stores Al- Abdali,

Amman / Jordan

Technical suppor t & repairs TEL 009626- 4646387 [email protected]

Lebanon Fototek S.A.R.L. Technical suppor t & repairs TEL +961 1 252474 [email protected] Techno Blue Technical suppor t TEL 00974 44 66 175 [email protected]

Saudi Arabia Emam Distribution Co. Ltd. Technical suppor t TEL 96626978756 [email protected]

Syria Film Trading Company Technical suppor t TEL + 963 11 2218049 [email protected]

Repair service TEL + 963 21 4641903 [email protected]

U.A.E. Grand Stores Technical suppor t & repairs TEL + 971-4-2823700 [email protected]

Yemen Al-Haidary Trading Technical suppor t TEL 00967-1-503980

Repair service TEL 00967-1-503977

AFRICA

Egypt Foto Express Egypt Technical suppor t & repairs TEL (202) 7762062 [email protected]

Kenya Fuji Kenya Ltd Repair service TEL (254-20)4446265-8 [email protected]

South Arica Cameratek CC. Technical suppor t & repairs TEL +27 11 251 2400 www.cameratek.co.za

OCEANIAAustralia FUJIFILM Australia Pty Ltd Technical suppor t & repairs TEL 1800 226 355 [email protected]

Fiji Brijlal & Co. Ltd Technical suppor t & repairs TEL (679)3304133 [email protected]

New Caledonia Phocidis SARL Technical suppor t & repairs TEL (00 687) 25-46-35 [email protected]

OCEANIA

New Zealand Fujilm NZ Ltd Technical suppor t & repairs TEL +64-9-4140400 [email protected]

Papua New

Guinea

Oceania PNG Limited Technical suppor t TEL +675 3256411 [email protected]

ASIAHong Kong Fuji Photo Products Co., Ltd. Technical suppor t & repairs TEL (852)2406 3287 [email protected]

Indonesia PT. Modern Internasional, Tbk. Technical suppor t & repairs TEL +62 021 45867187 [email protected]

Malaysia FUJIFILM (Malaysia) Sdn. Bhd. Technical suppor t TEL 603-55698388 [email protected]

Repair service TEL 603-55698388 [email protected]



103

A p p en d i x

Philippines YKL Deve lopme nt & Trdg. Co rp. Technical suppor t TEL 632-7436601~06 [email protected] [email protected]

Repair service TEL 632-7436601~06 [email protected]

Singapore FUJIFILM (Singapore) Pte Ltd Technical suppor t & repairs TEL 65-6380 5557 [email protected]

South Korea Korea Fujilm Co., Ltd. Technical suppor t TEL +82-2-3282-7363 [email protected]

Yonsan AS C enter (Fu jidi gita l) Repair service TEL +82-2-701-1472 [email protected]

Kangnam AS Center (Digitalgallery) Repair service TEL +82-2-2203-1472 [email protected]

Busan AS Center (Digital -Sewon) Repair service TEL +82-51-806-1472 [email protected]

Taiwan Hung Chong Corp. Technical suppor t & repairs TEL 886-2-6602-8988 [email protected]

Thailand FUJIFILM (Thailand) Ltd. Technical suppor t TEL +662-2706000 ext . 751,[email protected] [email protected]

Repair service TEL +662-2706000 ext.761,762 [email protected]

Vietnam International Minh Viet Co., Ltd. Technical support & repairs TEL +84-8-4135740 ext. 322 [email protected]

IMPORTANT NOTICE: Read Beore Using the SotwareBEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM CORPORATION, PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. YOU SHOULD USE THE SOFTWARE ON THE CD-ROM ONLY IF YOU CON-SENT TO THIS AGREEMENT. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS AGREEMENT.

End User License Agreement This End User License Agreement (“Agreement” ) is an agreement between FUJIFILMCorporation (“FUJIFILM”) and you, which sets orth the terms and conditions o the li-cense granted or you to use the sotware provided by FUJIFILM.

The CD -ROM contains third-party sot ware. In case a separate agreement is provided

b hi d li i h i i h h ll

4. Ownership.

All copyrights and other proprietary rights to Sotware and Documentation areowned and retained by FUJIFILM or the third party suppliers as indicated on or inSotware or Documentation. Nothing contained herein shall be construed, expresslyor implicitly, as transerring or granting any right, license, or title to you other thanthose explicitly granted under this Agreement.

5. Limited Warranty.FUJIFILM warrants to you that Media is ree rom any deect in material and workman-ship under normal use or ninety (90) days rom the date o your receipt o Media.Should Media not meet the oregoing warranty, FUJIFILM shall replace such deectiveMedia with other Media bearing no deect. FUJIFILM’s entire liability and your soleand exclusive remedy with regard to any deect in Media shall be expressly limited tosuch FUJIFILM’s replacement o Media as provided herein

SC R O RR



7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

by a third party supplier or its sotware, the provisions o such separate agreement shallapply to the use o such third party sotware, prevailing over those o this Agreement.

1. Denitions.(a) “Media” means the CD-ROM titled “Sotware or FinePix” which is provided to you

together with this Agreement.(b) “Sotware” means the sotware which is recorded on Media.(c) “Documentation” means the operation manuals o Sotware and other related

written materials which are provided to you together with Media.(d) “Product” means Media (including Sotware) and Documentation collectively.

2. Use o Sotware.FUJIFILM grants to you a nontranserable, nonexclusive license:(a) to install one copy o Sotware onto one computer in binary machine executable

orm;(b) to use Sotware on the computer onto which Sotware is installed; and(c) to make one backup copy o Sotware.

3. Restrictions.3.1 You shall not distribute, rent, lease or otherwise transer all or any part o Sotware,

Media or Documentation to any third party without FUJIFILM’s prior written con-sent. You also shall not sublicense, assign or otherwise transer all or any part o the rights granted to you by FUJIFILM under this Agreement without FUJIFILM’sprior written consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall not copy or repro-duce all or any part o Sot ware or Documentation.

3.3 You shall not modiy, adapt or translate Sotware or Documentation. You also

shall not alter or remove copyright and other proprietary notices that appear onor in Sotware or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer, decompile, ordisassemble Sotware.

6. DISCLAIMER OF WARRANTY.EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT “AS IS”AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALLMAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MAT- TERS, INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT,PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMI TATION OF LIABILIT Y.IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DI-RECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDINGDAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE OF ORINABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITYOF SUCH DAMAGES.

8. No export.You acknowledge that neither Sotware nor any part thereo, will be transerred, orexported to any country or used in any manner in violation o any export control lawsand regulations to which Sotware is subject.

9. Termination.In case you breach any o the terms and conditions hereo, FUJIFILM may immediatelyterminate this Agreement without any notice.

10. Term. This Agreement is eect ive until the date when you cease to use Sotware, unlessearlier terminated in accordance with Section 9 hereo.

11. Obligation upon termination.Upon termination or expiration o this Agreement, you shall, at your own responsibil-ity and expense, delete or destroy immediately all Sotware (including its copies),Media and Documentation.

12. Governing Law. This Agreement shall be governed by and construed in accordance with laws o Japan.

Printed in China

Date post:	14-Apr-2018
Category:	Documents
Upload:	alexandru-si-atat
View:	239 times
Download:	0 times

Fujifilm Finepix j15fd Manual

Documents