FURNITURE PARTS UNLIMITED FROM IFSCO
IFSCO INDUSTRIES
Division of
ILLINOIS FIBRE SPECIALTY CO.
4301 S. Western Blvd., Chicago, IL 60609
773-376-1122
Ladies and Gentlemen:
IFSCO has done it again… our new catalog affords you unlimited opportunity in design possibilities. We have endeavored to provide a complete and functional line of furniture hardware, keeping in mind your production and cost problems.
Until now, there has always been the problem of obtaining the right part for the right application. All too often, a part had to be used just because it was available, not because it was the needed item. This frustrating problem is now a thing of the past. Our, ever expanding , line offers new flexibility in design and production. We can now provide you with the right part for the job.
Naturally, every item we have cannot be listed in this catalog. Let us know of your particular needs. Our engineering department stands ready to help you with your problems and special applications.
Complete service is yours, whether it be a design problem or a badly needed rush shipment.
We are eager to serve you.
Yours very truly,
IFSCO
MANUFACTURERS OF SWIVEL GLIDES * FERRULES * LEG PLATES * PLASTIC PARTS * T-NUTS
2
FURNITURE PARTS UNLIMITED FROM IFSCO
X Series - Round Metal Tube Caps………………..3
IFSCO Metal Finials………………………………………4
Floor Saver Economy Swivel Glides………………5
Homemaker Decorate Swivel Glides……………6
UC Series - Ferrule Swivel Floor Glides…………7
PR Series - Round Platform Swivel Glides……..8
PS Series - Square Platform Swivel Glides…….9
PR Series - Money Saver Round Platform Swivel Glides………………………………………………10
PS Series - Money Saver Square Platform Swivel Glides………………………………………………11
UB Series - Protector Square Boot Glides…..12
UB Series - Protector Square Boot Swivel Glides…………………………………………………………13
UBB Series - Bumper Glides…………………….…14
SC Series - Protector Square Metal Glides….14
Metal Swivel Glides……………………………………15
Economy Series Adjustable Glides……………..16
Homemaker Series Adjustable Glides…………17
PT Adjustable Plastic Base Glides……………….18
T Adjustable Metal Glides………………………….18
Plastic Tack Glides………………………………………19
Nail-On Plastic Bases………………………………….19
IFSCO Heavy Duty Plastic Nail-On Glides…….20
IFSCO Cushion Steel Nail-On Glides….....…….20
Economy Nail-On Glides…………………………….21
Homemaker Nail-On Glides…………………..…..21
Floor Saver Sockets……………………………….…..22
Floor Saver Siamese Sockets……………………...22
Economy Plastic Caps - Closures………………...23
Extra Duty Sockets……………………………………..24
IFSCO Grip Closures…………………………………...24
Rod & Wire Tips…………………………………………25
Spherettes………………………………………………...26
Wrought Iron Caps…………………………………….26
Flat Round Inserts - Closures……………………..27
Flat Round Inserts - Closures……………………..28
Inserts - Ball & Bullet Type………………………….28
Flat Square Inserts - Closures……………………..29
Flat Square Plastic Caps - Closures……………..30
Flat Rectangular Glides - Closures……………...31
Square Rocker Glides - Inserts - Closures…...32
Threaded Square Inserts - Closures…………...32
Heavy Duty Economy Round Inserts…………..33
Round Bumper Inserts - Glides…………………..33
Series A Angle Iron Caps…………………………….34
Rectangular Recessed Glides - Bumpers…….34
Stem Floor Glides - Bumpers……………………..35
Case Feet Recessed Bumpers……………………..36
Recessed Bumpers……………………………………..36
IFSCO Prong Type T-Nuts…………………………...37
IFSCO Popular Corner Plates……………………...38
IFSCO Corner Plates w/Threaded Nut………...38
IFSCO All Purpose Leg Plates……………………...39
IFSCO Pop Thread Leg Plates……………………...39
TABLE OF CONTENTS
MANUFACTURERS OF SWIVEL GLIDES * FERRULES * LEG PLATES * PLASTIC PARTS * T-NUTS
3
Part # Prongs Fits Tubing Size
XX500 1/2” 16-18 Ga. Straight
XX625 5/8” 16-18 Ga. Straight
XX750 3/4” 16-18 Ga. Straight
XX887 7/8” 16-18 Ga. Straight
XX888 7/8” 20 Ga. Straight
XX889 7/8” 20 Ga. Turn/Back
X1000 1” 16-18 Ga. Straight
X1001 1” 20 Ga. Turn/Back
X1002 1” 14 Ga. Straight
X1125 1-1/8” 16-18 Ga. Straight
X1126 1-1/8” 20 Ga. Turn/Back
X1134 1-1/4” 16-18 Ga. Straight
X1135 1-1/4” 20 Ga. Turn/Back
X1150 1-1/2” 16-18 Ga. Straight
X1151 1-1/2” 20 Ga. Turn/Back
FURNITURE PARTS UNLIMITED FROM IFSCO
X SERIES IFSCO ROUND METAL CLOSURE - TUBE CAPS
Designed to Decorate and Close
Tube Ends
Available in Brass, Nickel & Chrome Finish. Note: Raw Tube Caps Available.
4
Part # Type I.D. Height
550 FR 1/2” 1” Round top
637 FR 5/8” 1” Round top
637 FC 5/8” 1” Crown top
638 FC 5/8” 1-1/2” Crown top
639 FC 5/8” 2-1/2” Bullet nose
757 FC 5/8” 1” Crown top
756 FR 3/4” 1” Round top
886 FT 3/4“ 9/16” Flat top
887 FC 7/8” 1” Crown top
887 FR 7/8” 1” Round top
1000 FT 1” 1” Flat top
1000 FT 1” 1” Round top
FURNITURE PARTS UNLIMITED FROM IFSCO
IFSCO METAL FINIALS
Made to Fit Over Tubing or Rod.
Available in Crown or Round Top.
Available in Brass, Nickel & Aluminum Finish.
5
Part # Base Fits Tubing Size
19 Series 1/2” Round tubing 7/8”
19 Series 5/8” Round tubing 7/8”
19 Series 3/4” Round tubing 7/8”
27 Series 1/2” Round tubing 1-1/8”
27 Series 5/8” Round tubing 1-1/8”
27 Series 3/4” Round tubing 1-1/8”
27 Series 7/8” Round tubing 1-1/8”
29 Series 5/8” Round tubing 1-5/16”
29 Series 3/4” Round tubing 1-5/16”
29 Series 7/8” Round tubing 1-5/16”
29 Series 1” Round tubing 1-5/16”
49 Series 5/8” Round tubing 1-11/16”
49 Series 3/4” Round tubing 1-11/16”
49 Series 7/8” Round tubing 1-11/16”
49 Series 1” Round tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
FLOOR SAVER ECONOMY SWIVEL GLIDES
For Metal Furniture Displays &
Other Products
Plastic Base Colors: Gold, Grey, Natural, Black or Brown.
6
Part # Base Fits Tubing Size
35 Series 1/2” Round tubing 7/8”
35 Series 5/8” Round tubing 7/8”
35 Series 3/4” Round tubing 7/8”
36 Series 1/2” Round tubing 1-1/8”
36 Series 5/8” Round tubing 1-1/8”
36 Series 3/4” Round tubing 1-1/8”
63 Series 3/4” Round tubing 1-5/16”
63 Series 7/8” Round tubing 1-5/16”
63 Series 1” Round tubing 1-5/16”
66 Series 3/4” Round tubing 1-5/16”
66 Series 7/8” Round tubing 1-5/16”
66 Series 1” Round tubing 1-5/16”
93 Series 3/4” Round tubing 1-11/16”
93 Series 7/8” Round tubing 1-11/16”
93 Series 1” Round tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
HOMEMAKER DECORATIVE SWIVEL GLIDES
For Metal Furniture Displays &
Other Products
Metal Shell Covers: Natural Marless Plastic Base.
7
Part # Base Fits Tubing Size
35 UC 5/8” Round tubing 7/8”
35 UC 3/4” Round tubing 7/8”
35 UC 7/8” Round tubing 7/8”
36 UC 3/4” Round tubing 1-1/8”
36 UC 7/8” Round tubing 1-1/8”
36 UC 1” Round tubing 1-1/8”
63 UC 7/8” Round tubing 1-5/16”
63 UC 1” Round tubing 1-5/16”
63 UC 1-1/8” Round tubing 1-5/16”
66 UC 7/8” Round tubing 1-5/16”
66 UC 1” Round tubing 1-5/16”
66 UC 1-1/8” Round tubing 1-5/16”
93 UC 1” Round tubing 1-11/16”
93 UC 1-1/8” Round tubing 1-11/16”
93 UC 1-1/4” Round tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
UC SERIES FERRULE SWIVEL FLOOR GLIDES
Extra Strength Glides with Cushioning
Spacer. An Ideal Glide for Chairs & Stools.
Metal Shell Covers: Natural Marless Plastic Base. Ferrule Heights: 9/16” & 1”.
8
Part # Base Fits Tubing Size
35 PR 5/8” Round tubing 7/8”
35 PR 3/4” Round tubing 7/8”
35 PR 7/8” Round tubing 7/8”
36 PR 3/4” Round tubing 1-1/8”
36 PR 7/8” Round tubing 1-1/8”
36 PR 1” Round tubing 1-1/8”
63 PR 7/8” Round tubing 1-5/16”
63 PR 1” Round tubing 1-5/16”
63 PR 1-1/8” Round tubing 1-5/16”
66 PR 7/8” Round tubing 1-5/16”
66 PR 1” Round tubing 1-5/16”
66 PR 1-1/8” Round tubing 1-5/16”
93 PR 1” Round tubing 1-11/16”
93 PR 1-1/8” Round tubing 1-11/16”
93 PR 1-1/4” Round tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
PR SERIES ROUND PLATFORM CONTRACT SWIVEL FLOOR GLIDES
For Metal Furniture Displays &
Other Products
Metal Shell Covers: Natural Marless Plastic Base.
9
Part # Base Fits Tubing Size
35 PS 3/4” Square tubing 7/8”
35 PS 13/16” Square tubing 7/8”
35 PS 7/8” Square tubing 7/8”
36 PS 3/4” Square tubing 1-1/8”
36 PS 13/16” Square tubing 1-1/8”
36 PS 7/8” Square tubing 1-1/8”
63 PS 3/4” Square tubing 1-5/16”
63 PS 13/16” Square tubing 1-5/16”
63 PS 7/8” Square tubing 1-5/16”
66 PS 13/16” Square tubing 1-5/16”
66 PS 7/8” Square tubing 1-5/16”
66 PS 1” Square tubing 1-5/16”
93 PS 13/16” Square tubing 1-11/16”
93 PS 7/8” Square tubing 1-11/16”
93 PS 1” Square tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
PS SERIES SQUARE PLATFORM SWIVEL FLOOR GLIDES
Sturdy Glides for Public Seating
(Chairs & Stools)
Metal Shell Covers: Natural Marless Plastic Base.
10
Part # Base Fits Tubing Size
19 PR 5/8” Round tubing 7/8” Low
19 PR 3/4” Round tubing 7/8” Low
15 PR 7/8” Round tubing 7/8” Low
23 PR 3/4” Round tubing 7/8” High
23 PR 7/8” Round tubing 7/8” High
23 PR 1” Round tubing 7/8” High
27 PR 7/8” Round tubing 1-1/8”
27 PR 1” Round tubing 1-1/8”
27 PR 1-1/8” Round tubing 1-1/8”
29 PR 7/8” Round tubing 1-5/16”
29 PR 1” Round tubing 1-5/16”
29 PR 1-1/8” Round tubing 1-5/16”
49 PR 1” Round tubing 1-11/16”
49 PR 1-1/8” Round tubing 1-11/16”
49 PR 1-1/4” Round tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
PR SERIES MONEY SAVER ROUND PLATFORM SWIVEL FLOOR GLIDES
A Functional Inexpensive Durable
Swivel Glide
Available Base Colors: Black, Beige, Natural, Gold, Grey, Brown or Colors to Suit
11
Part # Base Fits Tubing Size
23 PS 3/4” Square tubing 7/8”
23 PS 13/16” Square tubing 7/8”
23 PS 7/8” Square tubing 7/8”
23 PS 1” Square tubing 7/8”
27 PS 3/4” Square tubing 1-1/8”
27 PS 13/16” Square tubing 1-1/8”
27 PS 7/8” Square tubing 1-1/8”
27 PS 1” Square tubing 1-1/8”
29 PS 3/4” Square tubing 1-5/16”
29 PS 13/16” Square tubing 1-5/16”
29 PS 7/8” Square tubing 1-5/16”
29 PS 1” Square tubing 1-5/16”
49 PS 13/16” Square tubing 1-11/16”
49 PS 7/8” Square tubing 1-11/16”
49 PS 1” Square tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
PS SERIES MONEY SAVER SQUARE PLATFORM SWIVEL GLIDES
For Metal Furniture Displays &
Other Products
Metal Shell Covers: Natural Marless Plastic Base.
12
Part # Base Fits Tubing Size
35 UB 5/8” Square tubing 7/8”
35 UB 3/4” Square tubing 7/8”
35 UB 13/16” Square tubing 7/8”
35 UB 7/8” Square tubing 7/8”
36 UB 5/8” Square tubing 1-1/8”
36 UB 3/4” Square tubing 1-1/8”
36 UB 13/16” Square tubing 1-1/8”
36 UB 7/8” Square tubing 1-1/8”
63 UB 3/4” Square tubing 1-5/16”
63 UB 13/16” Square tubing 1-5/16”
63 UB 7/8” Square tubing 1-5/16”
63 UB 1” Square tubing 1-5/16”
93 UB 13/16” Square tubing 1-11/16”
93 UB 7/8” Square tubing 1-11/16”
93 UB 1” Square tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
UB SERIES PROTECTOR SQUARE BOOT SWIVEL GLIDES
Sturdy Glide Made With Protector
Cap to Cover End of Tubing
Boot Colors Available: Black, Grey, Gold & Colors to Suit.
13
Part # Base Fits Tubing Size
19 UB 5/8” Square tubing 7/8” Low
19 UB 3/4” Square tubing 7/8” Low
19 UB 7/8” Square tubing 7/8” Low
23 UB 3/4” Square tubing 7/8” High
23 UB 7/8” Square tubing 7/8” High
23 UB 1” Square tubing 7/8” High
27 UB 7/8” Square tubing 1-1/8”
27 UB 1” Square tubing 1-1/8”
27 UB 1-1/8” Square tubing 1-1/8”
29 UB 7/8” Square tubing 1-5/16”
29 UB 1” Square tubing 1-5/16”
29 UB 1-1/8” Square tubing 1-5/16”
49 UB 1” Square tubing 1-11/16”
49 UB 1-1/8” Square tubing 1-11/16”
49 UB 1-1/4” Square tubing 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
UB SERIES PROTECTOR SQUARE BOOT FLOOR GLIDES
Sturdy Glide Made With Boot to
Cover End of Tubing
Base Colors: Black, Grey, Gold, Brown or Natural. Boot Colors: Black, Grey, Gold or Colors to Suit.
14
Part # Fits Tubing Size Base Type Base
23 UBB 7/8” High Silhouette 7/8” High
35 UBB 7/8” Low Silhouette 7/8” Low
36 UBB 1-1/8”
Part # Base Fits Tubing Size
SC 213 13/16” Square tubing
SC 217 7/8” Square tubing
SC 213 B 13/16” Square tubing
FURNITURE PARTS UNLIMITED FROM IFSCO
UBB SERIES PROTECTOR SQUARE With BUMPER BOOT GLIDES
Protector 13/16 Square Boot Swivel
Glide with Bumper
Base Colors: Black, Grey, Gold, Brown or Natural. Boot Colors: Black, Grey, Gold or Colors to Suit.
SC SERIES PROTECTOR SQUARE With BUMPER BOOT GLIDES
Metal Cushioned Glide with Boot
Base Colors: Black, Grey, Gold, Brown or Natural. Boot Colors: Black, Grey, Gold or Colors to Suit.
15
Part # Style Fits Tubing Size
8100 1” Round tubing Platform
8110 1” Round tubing Ferrule
8120 7/8” Round tubing Ferrule
8130 3/4” Round tubing Ferrule
8140 5/8” Round tubing Ferrule
8150 1” Square tubing Platform
FURNITURE PARTS UNLIMITED FROM IFSCO
METAL SWIVEL GLIDES
Durable Metal Cushion Floor Glide
for Public & Institutional Seating
16
Part # Base Screw Length & Thread Size
19 ADJ 5/8” 1/4”-20 thread 7/8” Low
19 ADJ 3/4” 1/4”-20 thread 7/8” Low
19 ADJ 7/8” 1/4”-20 thread 7/8” Low
23 ADJ 3/4” 1/4”-20 thread 7/8” High
23 ADJ 7/8” 1/4”-20 thread 7/8” High
23 ADJ 1” 1/4”-20 thread 7/8” High
27 ADJ 7/8” 1/4”-20 thread 1-1/8”
27 ADJ 1” 1/4”-20 thread 1-1/8”
27 ADJ 1-1/8” 1/4”-20 thread 1-1/8”
29 ADJ 7/8” 1/4”-20 thread 1-5/16”
29 ADJ 1” 1/4”-20 thread 1-5/16”
29 ADJ 1-1/8” 1/4”-20 thread 1-5/16”
49 ADJ 1” 1/4”-20 thread 1-11/16”
49 ADJ 1-1/8” 1/4”-20 thread 1-11/16”
49 ADJ 1-1/4” 1/4”-20 thread 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
ECONOMY SERIES ADJUSTABLE FLOOR GLIDES
Durable Plastic Base Adjustable
Floor Glides
Screws are Zinc or Brass Finish. Also 5/16”-18 thread screws in 1/2” to 1” lengths.
17
Part # Base Screw Length & Thread Size
35 ADJ 1/2” 1/4”-20 thread 7/8” Low
35 ADJ 3/4” 1/4”-20 thread 7/8” Low
35 ADJ 1” 1/4”-20 thread 7/8” Low
36 ADJ 1/2” 1/4”-20 thread 1-1/8”
36 ADJ 3/4” 1/4”-20 thread 1-1/8”
36 ADJ 1” 1/4”-20 thread 1-1/8”
63 ADJ 3/4” 1/4”-20 thread 1-5/16”
63 ADJ 1” 1/4”-20 thread 1-5/16”
63 ADJ 1-1/4” 1/4”-20 thread 1-5/16”
66 ADJ (1-1/8” Shroud) 1” 1/4”-20 thread 1-5/16”
66 ADJ (1-1/8” Shroud) 1-1/4” 1/4”-20 thread 1-5/16”
93 ADJ 1” 1/4”-20 thread 1-5/16”
93 ADJ 1-1/4” 1/4”-20 thread 1-11/16”
99 ADJ (1-5/16” Shroud) 1” 1/4”-20 thread 1-11/16”
99 ADJ (1-5/16” Shroud) 1-1/4” 1/4”-20 thread 1-11/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
HOMEMAKER SERIES ADJUSTABLE FLOOR GLIDES
A Decorative Floor Glide With a Marless
Plastic Base Covered by Metal Shroud.
Screws are Zinc or Brass Finish. Also 5/16”-18 thread screws in 1/2” to 1” lengths.
18
Part # Base Screw Length & Thread Size
PT 202 1/2” 1/4”-20 thread 3/4”
PT 202 3/4” 1/4”-20 thread 3/4”
PT 204 1/2” 1/4”-20 thread 7/8”
PT 204 3/4” 1/4”-20 thread 7/8”
PT 206 1/2” 1/4”-20 thread 1-1/16”
PT 206 3/4” 1/4”-20 thread 1-1/16”
T 107 (with steel base) 1/2” 1/4”-20 thread 7/8”
T 107 (with steel base) 3/4” 1/4”-20 thread 7/8”
T 110 (with steel base) 1/2” 1/4”-20 thread 1-1/16”
T 110 (with steel base) 3/4” 1/4”-20 thread 1-1/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
PT SERIES ADJUSTABLE FLOOR GLIDES with PLASTIC BASE
Adjustable Floor Glides for
Appearance & Wear
Screws are Zinc Finish.
T SERIES ADJUSTABLE FLOOR GLIDES with STEEL BASE
19
Part # Size Style
560 5/8” Round base
575 3/4” Round base
580 7/8” Round base
862 5/8” Flat base
875 3/4” Flat base
875 XL 3/4” Flat - 11/32” thick
087 7/8” base
112 1-1/8” base
130 1-5/16” base
160 1-11/16” base
FURNITURE PARTS UNLIMITED FROM IFSCO
PLASTIC TACK GLIDES
Made in Marless High Density Plastic.
Colors: Natural, Brown, Beige & Black
Available in Natural, Black, Grey & Gold colors
NAIL-ON PLASTIC BASES
For Wood Furniture, Fastened with
Nail or Wood Screw
20
Part # Base Thickness Base Size & Type
N275 3/4” Marless Plastic Base 11/32”
N287 7/8” Marless Plastic Base 11/32”
N300 1-1/8” Marless Plastic Base 5/16”
N107 7/8” Steel Base 1-1/8”
N116 1-1/6” Steel Base 1-1/8”
N101 7/8” Marless Plastic Base 1-5/16”
FURNITURE PARTS UNLIMITED FROM IFSCO
IFSCO SERIES HEAVY DUTY PLASTIC NAIL-ON FLOOR GLIDES
A Nail-On Glide Made for Heavy Duty
Wear. Thick Base Made of Marless Plastic.
Plastic Colors Available: Natural Brown or Black.
IFSCO SERIES CUSHION STEEL NAIL-ON FLOOR GLIDES
For Wood Furniture Requiring Steel
Base and Cushioning.
21
Part # Comments Base
19NG 7/8”
27NG 1-1/8”
29NG 1-5/16”
49NG 1-11/16”
35NG 7/8” Low
36NG 1-1/8”
63NG 1-5/16”
66NG (covered by 1-1/8” metal shroud) 1-5/16”
93NG 1-11/16”
99NG 1-11/16” (covered by 1-1/8” metal shroud)
FURNITURE PARTS UNLIMITED FROM IFSCO
ECONOMY SERIES NAIL-ON FLOOR GLIDES
Nail-On Glide with Brass Plated Shroud
over Base. Allows Full Contact with Floor.
Plastic Colors Available: Natural Brown or Black.
HOMEMAKER SERIES NAIL-ON FLOOR GLIDES
22
Part # O.D. Size Notes
690 Round bottom 1”
691 Round bottom 7/8”
698 Round bottom 7/8”
692 Round bottom 3/4”
693 Round bottom 5/8”
695 Round bottom 1/2”
696 Round bottom 3/8”
700 Double round bottom 1”
702 Double round bottom 3/4”
703 Double round bottom 5/8”
704 Double round bottom 1/2”
705 Double round bottom 3/8”
FURNITURE PARTS UNLIMITED FROM IFSCO
FLOOR SAVER SOCKETTE
Heavy Duty Plastic Caps and Closures for Tubing
and Rod. Popular for Folding Tables and Chairs.
Standard Colors: Black, Grey or White. Special Colors to Suit.
FLOOR SAVER SIAMESE SOCKETTE
23
Part # O.D. Tube Size
31020 1/2”
31015 5/8”
31010 3/4”
31005 7/8”
31000 1”
31004 1-1/8”
31001 1-1/4”
31150 1-1/2”
31203 1-5/8”
31200 2”
31202 2-1/2”
FURNITURE PARTS UNLIMITED FROM IFSCO
ECONOMY PLASTIC CAPS - CLOSURES
For Metal or Paper Tubes & Rods.
Easy to Install, Thin Wall, Flexible
Available Colors: Black, Grey, White & Gold
24
Part # O.D. Tube Size
1000 1”
1087 7/8”
1075 3/4”
1062 5/8”
Part # To Fit / Color
G-21010 Fits 1” tube / Grey
G-21020 Fits 1” tube / Black
G-21030 Fits 1” tube / Clear
FURNITURE PARTS UNLIMITED FROM IFSCO
EXTRA DUTY PLASTIC SOCKETS
Style Made For Folding Chairs &
Tables. Thick Wall & Bottom.
Available Colors: Beige & Black
IFSCO PLACTIC GRIP CLOSURES
25
Part # Will Fit Wire - Rod Size Length
66105 0.105” 11/32”
66125 1/8” 13/32”
66126 1/8” 17/32”
66135 0.135” 13/32”
66156 5/32” 13/32”
66187 3/16” 13/32”
66250 1/4” 7/16”
58312 5/16” 5/32”
58313 5/16” 23/32”
59375 3/8” 15/32”
59437 7/16” 17/32”
59500 1/2” 17/32”
59000 1” 3/4”
59000 XL 1” 1”
FURNITURE PARTS UNLIMITED FROM IFSCO
ROD & WIRE TIPS
Flexible Vinyl for Easy Assembly. Used on
Displays, Wire Goods & Housewares
All Sizes: Black & Small Sizes up to 7/16” Available in White.
26
Part # Inner Diameter Outer Diameter
730 1” 1-3/4”
733 3/4” 1”
735 5/8” 7/8”
731 1/2” 3/4”
732 3/8” 11/16”
Part # To Fit Base Diameter
7750 1/2” Rod 1”
7758 5/8” Rod 1-1/4”
FURNITURE PARTS UNLIMITED FROM IFSCO
SPHERETTES
Plastic Balls Made of Non-Marking
Low Density Polyethylene.
Available Colors: Black, White & Bronze
WROUGHT IRON CAPS
Available Colors: Black, White & Almond
Large Base Offers More Floor Contact.
Use on Iron Rod Furniture, Lamps, Etc.
27
Part # O.D. Tube Size & Gauge
11200 2” 18 Ga.
11182 1-1/2” 20 Ga.
11180 1-1/2” 18 Ga.
11175 1-1/2” 16 Ga.
11170 1-1/4” 18 Ga.
11172 1-1/4” 16 Ga.
11174 1-1/4” 14 Ga.
11160 1-1/8” 20 Ga.
11165 1-1/8” 18 Ga.
11150 1” 20 Ga.
11145 1” 18 Ga.
11140 1” 16 Ga.
11135 7/8” 18 Ga.
11137 7/8” 20 Ga.
11125 3/4” 20 Ga.
FURNITURE PARTS UNLIMITED FROM IFSCO
FLAT ROUND INSERTS - CLOSURES
Load Bearing Inserts for Tubular
Furniture, Displays, etc.
Inserts & Closures Made to Order. Minimum Cost for Tooling may apply.
28
Part # Notes O.D. Tube Size & Gauge
11120 2” 18 Ga.
11114 1-1/2” 20 Ga.
11112 1-1/2” 18 Ga.
11106 1-1/2” 16 Ga.
875150 1-1/2” 18 Ga. Ball w Flat Spot
875100 1” 18 Ga. Ball
875020 7/8” 18 Ga. Ball
875015 3/4” 18 Ga. Bullet
875010 5/8” 18 Ga. Bullet
FURNITURE PARTS UNLIMITED FROM IFSCO
FLAT ROUND INSERTS - CLOSURES
Load Bearing Inserts for Tubular
Furniture, Displays, etc.
Black Colors from Stock.
BALL & BULLET ROUND INSERTS - CLOSURES
29
Part # Notes Fits Square Tubing & Gauge
41200 2” 18 Ga.
41195 1-1/2” 18 Ga.
41194 1-1/4” 18 Ga.
41193 1-1/4” 14 Ga.
41193-H 1-1/4” 14 Ga. 7/8” Hole
41190 1-1/8” 18 Ga.
41189 1” 16 Ga.
41188 1” 20 Ga.
41187 1” 18 Ga.
41179 1” 14 Ga.
41186 7/8” 18 Ga.
41185 13/16” 20 Ga.
41184 13/16” 18 Ga.
41181 13/16” 16 Ga.
41177 13/16” 18 Ga. Domed
FURNITURE PARTS UNLIMITED FROM IFSCO
FLAT SQUARE INSERTS - CLOSURES
Load Bearing Inserts for Tubular
Furniture, Displays, etc.
All Sizes Available in Black. Special Colors on Request.
30
Part # Notes Fits Square Rod or Tube
41125 1-1/8”
41000 1”
41001 LS 1” Low silhouette
41101 RB 1” Rocker base
49200 15/16”
48700 7/8”
47500 3/4”
46001 5/8”
45000 1/2”
43750 3/8”
FURNITURE PARTS UNLIMITED FROM IFSCO
FLAT SQUARE PLASTIC CAPS - CLOSURES
Squares to Fit Square Rod or Tubing.
Made of Durable Polyethylene.
All Sizes Available in Black. Special Colors on Request.
31
Part # Gauge Fits Tube Size L x W
41155 2” 2-7/8” 11 Ga.
41160 1-1/2” 2” 18 Ga.
41161 1-1/4” 2” 18 Ga.
41162-18 1” 2” 18 Ga.
41162-16 1” 2” 16 Ga.
41164-18 3/4” 1-1/2” 18 Ga.
41164-16 3/4” 1-1/2” 16 Ga.
41169-11 3/4” 1-1/4” 11 Ga.
41165 5/8” 2” 16 Ga.
41163-16 1/2” 1-1/2” 16 Ga.
41163-18 1/2” 1-1/2” 18 Ga.
41166 1/2” 2” 16
FURNITURE PARTS UNLIMITED FROM IFSCO
FLAT RECTANGULAR GLIDES - CLOSURES
Load Bearing Inserts for Popular
Sizes of Rectangular Tubing.
All Sizes Available in Black.
32
Part # Notes Square Tube Size & Gauge
41101R 1” 18 Ga.
41176R 7/8” 18 Ga.
41180R 13/16” 18 Ga.
41175R 3/4” 18 Ga.
41175R-16 3/4” 16 Ga.
41150 1” 16 Ga.
41151 1” 18 Ga.
41154 3/4” 18 Ga.
FURNITURE PARTS UNLIMITED FROM IFSCO
SQUARE ROCKER GLIDES INSERTS - CLOSURES
Adapts to Angle of Tubing and Still
Affords Good Floor Contact.
Black Colors from Stock.
THREADED SQUARE INSERTS - CLOSURES
33
Part # For O.D. Tube Size & Gauge Notes
11791 1” 18 Ga.
11789 1” 20 Ga.
11789H 1” 20 Ga. 1/2” Hole
* 1/2” hole used for pole lamp assembly.
B6870 7/8” 16 Ga.
B6750 3/4” 16 Ga.
FURNITURE PARTS UNLIMITED FROM IFSCO
HEAVY DUTY ECONOMY ROUND INSERTS - CLOSURES
Load Bearing Inserts Good for All Types
of Tubular Furniture, like Folding Tables.
Black Colors from Stock.
ROUND BUMPER INSERTS - GLIDES
34
Part # To Fit Size Notes
A500 1/8” x 1/2” x 1/2”
A750 1/8” x 3/4” x 3/4”
A1000 1/8” X 1” X 1”
A1125 1/8” X 1-1/4” X 1-1/4”
A1150 1/8” X 1-1/2” X 1-1/2”
A4775 1/32” X 7/16” X 2-3/4”
Open ends left & right parts
11050 7/8” x 2-1/2” x 3/8” (13/32” recess) 5/32” holes
11050C (concave) 5/32” holes 5/8” x 2-1/2” x 3/8” (13/32” recess)
FURNITURE PARTS UNLIMITED FROM IFSCO
SERIES A ANGLE IRON CAPS
Offers More Floor Contact. Easily
Put on Angled Iron or Other Metal.
All Sizes Available in Black.
RECTANGULAR RECESSED GLIDES - BUMPERS
35
Part # Base Thickness Base Diameter / Stem Size
5584 1” 5/16” 3/8”
5585* 11/16” 5/16” 5/8”
5589 9/16” 7/32” 5/16”
5591 3/4” 5/16” 3/8”
5591XL 3/4” 5/16” 27/64”
5592 11/16” 5/16” 1/4”
5593 17/32” 5/16” 3/16”
5594 1/2” 3/16” 1/8”
5595 3/4” 3/16” 1/8”
5596 1/2” 1/4” 5/32”
5597 15/32” 3/16” 1/4”
5598 1/2” 1/4” 3/8”
5599 3/4” 1/4” 3/16”
* Tapered base
FURNITURE PARTS UNLIMITED FROM IFSCO
STEM FLOOR GLIDES - BUMPERS
Versatile Stem Glides for Spacer
and Bumper Glide Purposes.
Available Colors: Black, Grey, Gold & Natural. Made of Marless High Density Linear Poly.
36
Part # Dia. Height Screw Head Recess Hole Size
11035 1/2” 1/4” 5/16” 1/8”
11022 5/8” 11/32” 23/64 1/8”
11022 C 5/8” 11/32” 23/64” 1/8”
11001 5/8” 1/2” 5/16” 1/8”
11061 1” 1/2” 1/2” 1/4”
* 11022 C has Concave Head
11070 13/16” 3/8” 11/32” 1/8”
11075 3/4” 3/4” 3/8” 3/16”
11082 7/8” 3/8” 5/16” 5/32”
11086 13/16” 5/8” 5/16” 1/8”
11087 1” 7/8” 1/2” 1/4”
FURNITURE PARTS UNLIMITED FROM IFSCO
CASE FEET RECESSED BUMPERS
Case Feet for Cabinets, Carry
Cases, Displays and Housewares
Available Colors: Black, Brown & Grey.
RECESSED BUMPERS
Inexpensive Tapered Case Feet.
Ideal for Carrying Cases.
37
Part # Type Thread Size | Barrel Length | Base Dia.
T32-450 8/32” 3/4” 3 Prong 1/4”
T32-480 8/32” 1/2” 3 Prong 1/4”
T52-450 10/24” 3/4” 3 Prong 9/32”
T52-475 10/24” 1/2” 3 Prong 15/32”
T62-450 10/32” 3/4” 3 Prong 9/32”
T62-467 10/32” 1/2” 3 Prong 15/16”
T62-470 10/32” 3/4” 3 Prong 15/16”
T92-450 1/4-20” 3/4” 3 Prong 5/16”
T92-460 1/4-20” 3/4” 4 Prong 5/16”
T92-470 1/4-20” 3/4” 6 Prong 5/16”
T92-443 1/4-20” 3/4” 3 Prong 7/16”
T92-436 1/4-20” 3/4” 3 Prong 9/16”
T13-450 5/16-18” 7/8” 3 Prong 3/8”
T13-443 5/16”-18” 7/8” 3 Prong 9/16”
T33-450 3/8-16” 1” 4 Prong 7/16”
T33-470 3/8-16” 7/16” 1” 6 Prong
FURNITURE PARTS UNLIMITED FROM IFSCO
IFSCO PRONG TYPE T-NUTS
For Fastening Wood and Particle
Board.
38
Part # Thread Size Angle
101 1/4” 20 Straight
104 1/4” 20 10 degree
100 5/16” 18 Straight
105 5/16” 18 10 degree
150 5/16” 18 Straight
155 5/16” 18 10 degree
FURNITURE PARTS UNLIMITED FROM IFSCO
IFSCO POPULAR CORNER PLATES
Ideal for KD Assembly of Tables, Cabi-
nets, Displays, Etc. Ribbed for Strength
IFSCO CORNER PLATES WITH THREADED NUT
Same Plate at Above but Threaded Nut
Offers More Strength
39
Part # Thread Size Angle
500 5/16” 18 Straight
512 5/16” 18 12 degree
525 1/4” 20 12 degree
550 5/16” 18 Straight
561 5/16” 18 12 degree
567 5/16” 18 17 degree
560 1/4” 20 Straight
562 1/4” 20 12 degree
FURNITURE PARTS UNLIMITED FROM IFSCO
IFSCO ALL PURPOSE LEG PLATES
Mechanically Inserted Threaded Nut
Offers Strength for Many Applications
IFSCO POP THREAD LEG PLATES
A Unique Design Light Duty Leg Plate
for KD Assembly.
40
FURNITURE PARTS UNLIMITED FROM IFSCO
HOW TO ORDER
Order by Telephone: 773-376-1122
Order by Fax: 773-376-3111
Order by Mail: 4301 S. Western Blvd., Chicago, IL 60609
Order by E-mail: [email protected]
You can find us online at www.IFSCOind.com with Upholstery Vinyl Fabrics, Furniture Hard-ware and much more. We offer cut-to-size Upholstery Foam and Cushioning Material.
Call one of our friendly and helpful representatives with your requirements. We are happy to help you.
Take advantage of our matching service… send us a sample of what you need and well do our best to find it for you. We have so many products available that this catalog cannot hold them all.
Complete service is yours, whether it be a design problem or a badly needed rush shipment.
We are eager to serve you.
Yours very truly,
IFSCO
Contact us: [email protected]
Online: www.IFSCOind.com
MANUFACTURERS OF SWIVEL GLIDES * FERRULES * LEG PLATES * PLASTIC PARTS * T-NUTS