SCUBAPRO® Galileo G2 & DAN DL7 level 3
1
Presently (04/2018) there are NO DAN DL7 level3 Files for the Scubapro Galileo G2 (HW Ver. 0.0, SW Ver 1.3) neither with: SCUBAPRO® LogTRAK, Version 1.5.0.7 nor with SCUBAPRO® SmartTRAK 2.09 The described workaround works only for older Dive Computers, for eg. the SCUBAPRO® ALADIN [2] / Aladin Square… (https://www.divetable.info/Flyer/workaround.pdf)
2
SCUBAPRO ® Galileo G2 & DAN DL7 level 3
LogTRAK 1.5.0.7 allows only for TravelTRAK Format (*.asd) :
3
SCUBAPRO ® Galileo G2 & DAN DL7 level 3
Import of *.asd from G2 into SmartTRAK 2.09 gives now error message:
4
SCUBAPRO ® Galileo G2 & DAN DL7 level 3
The new SUBSURFACE 4.7.7 (https://subsurface-divelog.org/de/ ) will do the job with *.uddf files: connect the G2 to your PC (eg.: via USB cable) hit „LOG“ on G2: USB communication to PC:
5
SCUBAPRO ® Galileo G2 & DAN DL7 level 3
SUBSURFACE will do the job with *.uddf files: in SUBSURFACE 4.7.7 select:
Import from Dive Computer select Scubapro Galileo G2:
6
SCUBAPRO ® Galileo G2 & DAN DL7 level 3
SUBSURFACE will do the job with *.uddf files: select all log files (cntrl a), then:
7
SCUBAPRO ® Galileo G2 & DAN DL7 level 3
SUBSURFACE will do the job with *.uddf files: File Export (or cntrl e) Select „UDDF“:
store the log file and then :
8
… now upload the *.uddf into the DAN Diver Safety Guardian Portal (DSG)! https://www.diversafetyguardian.org/site/frontend/
